Virtio SPI Linux driver

Merge series from Haixu Cui <quic_haixcui@quicinc.com>:

This is the 10th version of the virtio SPI Linux driver patch series which is
intended to be compliant with the upcoming virtio specification
version 1.4. The specification can be found in repository:
https://github.com/oasis-tcs/virtio-spec.git branch virtio-1.4.

2 files changed, 182 insertions, 0 deletions

diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index 7aa2eb766205..6c12db16faa3 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -68,6 +68,7 @@
 #define VIRTIO_ID_AUDIO_POLICY		39 /* virtio audio policy */
 #define VIRTIO_ID_BT			40 /* virtio bluetooth */
 #define VIRTIO_ID_GPIO			41 /* virtio gpio */
+#define VIRTIO_ID_SPI			45 /* virtio spi */
 
 /*
  * Virtio Transitional IDs
diff --git a/include/uapi/linux/virtio_spi.h b/include/uapi/linux/virtio_spi.h
new file mode 100644
index 000000000000..8ab3c970cdd3
--- /dev/null
+++ b/include/uapi/linux/virtio_spi.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Copyright (C) 2023 OpenSynergy GmbH
+ * Copyright (C) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#ifndef _LINUX_VIRTIO_VIRTIO_SPI_H
+#define _LINUX_VIRTIO_VIRTIO_SPI_H
+
+#include <linux/types.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_types.h>
+
+/* Sample data on trailing clock edge */
+#define VIRTIO_SPI_CPHA			_BITUL(0)
+/* Clock is high when IDLE */
+#define VIRTIO_SPI_CPOL			_BITUL(1)
+/* Chip Select is active high */
+#define VIRTIO_SPI_CS_HIGH			_BITUL(2)
+/* Transmit LSB first */
+#define VIRTIO_SPI_MODE_LSB_FIRST		_BITUL(3)
+/* Loopback mode */
+#define VIRTIO_SPI_MODE_LOOP			_BITUL(4)
+
+/**
+ * struct virtio_spi_config - All config fields are read-only for the
+ * Virtio SPI driver
+ * @cs_max_number: maximum number of chipselect the host SPI controller
+ *   supports.
+ * @cs_change_supported: indicates if the host SPI controller supports to toggle
+ *   chipselect after each transfer in one message:
+ *   0: unsupported, chipselect will be kept in active state throughout the
+ *      message transaction;
+ *   1: supported.
+ *   Note: Message here contains a sequence of SPI transfers.
+ * @tx_nbits_supported: indicates the supported number of bit for writing:
+ *   bit 0: DUAL (2-bit transfer), 1 for supported
+ *   bit 1: QUAD (4-bit transfer), 1 for supported
+ *   bit 2: OCTAL (8-bit transfer), 1 for supported
+ *   other bits are reserved as 0, 1-bit transfer is always supported.
+ * @rx_nbits_supported: indicates the supported number of bit for reading:
+ *   bit 0: DUAL (2-bit transfer), 1 for supported
+ *   bit 1: QUAD (4-bit transfer), 1 for supported
+ *   bit 2: OCTAL (8-bit transfer), 1 for supported
+ *   other bits are reserved as 0, 1-bit transfer is always supported.
+ * @bits_per_word_mask: mask indicating which values of bits_per_word are
+ *   supported. If not set, no limitation for bits_per_word.
+ * @mode_func_supported: indicates the following features are supported or not:
+ *   bit 0-1: CPHA feature
+ *     0b00: invalid, should support as least one CPHA setting
+ *     0b01: supports CPHA=0 only
+ *     0b10: supports CPHA=1 only
+ *     0b11: supports CPHA=0 and CPHA=1.
+ *   bit 2-3: CPOL feature
+ *     0b00: invalid, should support as least one CPOL setting
+ *     0b01: supports CPOL=0 only
+ *     0b10: supports CPOL=1 only
+ *     0b11: supports CPOL=0 and CPOL=1.
+ *   bit 4: chipselect active high feature, 0 for unsupported and 1 for
+ *     supported, chipselect active low is supported by default.
+ *   bit 5: LSB first feature, 0 for unsupported and 1 for supported,
+ *     MSB first is supported by default.
+ *   bit 6: loopback mode feature, 0 for unsupported and 1 for supported,
+ *     normal mode is supported by default.
+ * @max_freq_hz: the maximum clock rate supported in Hz unit, 0 means no
+ *   limitation for transfer speed.
+ * @max_word_delay_ns: the maximum word delay supported, in nanoseconds.
+ *   A value of 0 indicates that word delay is unsupported.
+ *   Each transfer may consist of a sequence of words.
+ * @max_cs_setup_ns: the maximum delay supported after chipselect is asserted,
+ *   in ns unit, 0 means delay is not supported to introduce after chipselect is
+ *   asserted.
+ * @max_cs_hold_ns: the maximum delay supported before chipselect is deasserted,
+ *   in ns unit, 0 means delay is not supported to introduce before chipselect
+ *   is deasserted.
+ * @max_cs_incative_ns: maximum delay supported after chipselect is deasserted,
+ *   in ns unit, 0 means delay is not supported to introduce after chipselect is
+ *   deasserted.
+ */
+struct virtio_spi_config {
+	__u8 cs_max_number;
+	__u8 cs_change_supported;
+#define VIRTIO_SPI_RX_TX_SUPPORT_DUAL		_BITUL(0)
+#define VIRTIO_SPI_RX_TX_SUPPORT_QUAD		_BITUL(1)
+#define VIRTIO_SPI_RX_TX_SUPPORT_OCTAL		_BITUL(2)
+	__u8 tx_nbits_supported;
+	__u8 rx_nbits_supported;
+	__le32 bits_per_word_mask;
+#define VIRTIO_SPI_MF_SUPPORT_CPHA_0		_BITUL(0)
+#define VIRTIO_SPI_MF_SUPPORT_CPHA_1		_BITUL(1)
+#define VIRTIO_SPI_MF_SUPPORT_CPOL_0		_BITUL(2)
+#define VIRTIO_SPI_MF_SUPPORT_CPOL_1		_BITUL(3)
+#define VIRTIO_SPI_MF_SUPPORT_CS_HIGH		_BITUL(4)
+#define VIRTIO_SPI_MF_SUPPORT_LSB_FIRST		_BITUL(5)
+#define VIRTIO_SPI_MF_SUPPORT_LOOPBACK		_BITUL(6)
+	__le32 mode_func_supported;
+	__le32 max_freq_hz;
+	__le32 max_word_delay_ns;
+	__le32 max_cs_setup_ns;
+	__le32 max_cs_hold_ns;
+	__le32 max_cs_inactive_ns;
+};
+
+/**
+ * struct spi_transfer_head - virtio SPI transfer descriptor
+ * @chip_select_id: chipselect index the SPI transfer used.
+ * @bits_per_word: the number of bits in each SPI transfer word.
+ * @cs_change: whether to deselect device after finishing this transfer
+ *     before starting the next transfer, 0 means cs keep asserted and
+ *     1 means cs deasserted then asserted again.
+ * @tx_nbits: bus width for write transfer.
+ *     0,1: bus width is 1, also known as SINGLE
+ *     2  : bus width is 2, also known as DUAL
+ *     4  : bus width is 4, also known as QUAD
+ *     8  : bus width is 8, also known as OCTAL
+ *     other values are invalid.
+ * @rx_nbits: bus width for read transfer.
+ *     0,1: bus width is 1, also known as SINGLE
+ *     2  : bus width is 2, also known as DUAL
+ *     4  : bus width is 4, also known as QUAD
+ *     8  : bus width is 8, also known as OCTAL
+ *     other values are invalid.
+ * @reserved: for future use.
+ * @mode: SPI transfer mode.
+ *     bit 0: CPHA, determines the timing (i.e. phase) of the data
+ *         bits relative to the clock pulses.For CPHA=0, the
+ *         "out" side changes the data on the trailing edge of the
+ *         preceding clock cycle, while the "in" side captures the data
+ *         on (or shortly after) the leading edge of the clock cycle.
+ *         For CPHA=1, the "out" side changes the data on the leading
+ *         edge of the current clock cycle, while the "in" side
+ *         captures the data on (or shortly after) the trailing edge of
+ *         the clock cycle.
+ *     bit 1: CPOL, determines the polarity of the clock. CPOL=0 is a
+ *         clock which idles at 0, and each cycle consists of a pulse
+ *         of 1. CPOL=1 is a clock which idles at 1, and each cycle
+ *         consists of a pulse of 0.
+ *     bit 2: CS_HIGH, if 1, chip select active high, else active low.
+ *     bit 3: LSB_FIRST, determines per-word bits-on-wire, if 0, MSB
+ *         first, else LSB first.
+ *     bit 4: LOOP, loopback mode.
+ * @freq: the transfer speed in Hz.
+ * @word_delay_ns: delay to be inserted between consecutive words of a
+ *     transfer, in ns unit.
+ * @cs_setup_ns: delay to be introduced after CS is asserted, in ns
+ *     unit.
+ * @cs_delay_hold_ns: delay to be introduced before CS is deasserted
+ *     for each transfer, in ns unit.
+ * @cs_change_delay_inactive_ns: delay to be introduced after CS is
+ *     deasserted and before next asserted, in ns unit.
+ */
+struct spi_transfer_head {
+	__u8 chip_select_id;
+	__u8 bits_per_word;
+	__u8 cs_change;
+	__u8 tx_nbits;
+	__u8 rx_nbits;
+	__u8 reserved[3];
+	__le32 mode;
+	__le32 freq;
+	__le32 word_delay_ns;
+	__le32 cs_setup_ns;
+	__le32 cs_delay_hold_ns;
+	__le32 cs_change_delay_inactive_ns;
+};
+
+/**
+ * struct spi_transfer_result - virtio SPI transfer result
+ * @result: Transfer result code.
+ *          VIRTIO_SPI_TRANS_OK: Transfer successful.
+ *          VIRTIO_SPI_PARAM_ERR: Parameter error.
+ *          VIRTIO_SPI_TRANS_ERR: Transfer error.
+ */
+struct spi_transfer_result {
+#define VIRTIO_SPI_TRANS_OK	0
+#define VIRTIO_SPI_PARAM_ERR	1
+#define VIRTIO_SPI_TRANS_ERR	2
+	__u8 result;
+};
+
+#endif /* #ifndef _LINUX_VIRTIO_VIRTIO_SPI_H */