Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

1 files changed, 118 insertions, 40 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9e1b24c29f0c..63921672bed0 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -68,26 +68,6 @@ struct wiphy;
  */
 
 /**
- * enum ieee80211_band - supported frequency bands
- *
- * The bands are assigned this way because the supported
- * bitrates differ in these bands.
- *
- * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
- * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
- * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
- * @IEEE80211_NUM_BANDS: number of defined bands
- */
-enum ieee80211_band {
-	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
-	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
-	IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ,
-
-	/* keep last */
-	IEEE80211_NUM_BANDS
-};
-
-/**
  * enum ieee80211_channel_flags - channel flags
  *
  * Channel flags set by the regulatory control code.
@@ -167,7 +147,7 @@ enum ieee80211_channel_flags {
  * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels.
  */
 struct ieee80211_channel {
-	enum ieee80211_band band;
+	enum nl80211_band band;
 	u16 center_freq;
 	u16 hw_value;
 	u32 flags;
@@ -324,7 +304,7 @@ struct ieee80211_sta_vht_cap {
 struct ieee80211_supported_band {
 	struct ieee80211_channel *channels;
 	struct ieee80211_rate *bitrates;
-	enum ieee80211_band band;
+	enum nl80211_band band;
 	int n_channels;
 	int n_bitrates;
 	struct ieee80211_sta_ht_cap ht_cap;
@@ -816,6 +796,7 @@ enum station_parameters_apply_mask {
  * @supported_oper_classes_len: number of supported operating classes
  * @opmode_notif: operating mode field from Operating Mode Notification
  * @opmode_notif_used: information if operating mode field is used
+ * @support_p2p_ps: information if station supports P2P PS mechanism
  */
 struct station_parameters {
 	const u8 *supported_rates;
@@ -841,6 +822,7 @@ struct station_parameters {
 	u8 supported_oper_classes_len;
 	u8 opmode_notif;
 	bool opmode_notif_used;
+	int support_p2p_ps;
 };
 
 /**
@@ -1063,11 +1045,12 @@ struct cfg80211_tid_stats {
  * @rx_beacon: number of beacons received from this peer
  * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
  *	from this peer
+ * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer
  * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
  *	(IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
  */
 struct station_info {
-	u32 filled;
+	u64 filled;
 	u32 connected_time;
 	u32 inactive_time;
 	u64 rx_bytes;
@@ -1106,6 +1089,7 @@ struct station_info {
 	u32 expected_throughput;
 
 	u64 rx_beacon;
+	u64 rx_duration;
 	u8 rx_beacon_signal_avg;
 	struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
 };
@@ -1368,7 +1352,7 @@ struct mesh_setup {
 	bool user_mpm;
 	u8 dtim_period;
 	u16 beacon_interval;
-	int mcast_rate[IEEE80211_NUM_BANDS];
+	int mcast_rate[NUM_NL80211_BANDS];
 	u32 basic_rates;
 };
 
@@ -1455,6 +1439,7 @@ struct cfg80211_ssid {
  * @mac_addr_mask: MAC address mask used with randomisation, bits that
  *	are 0 in the mask should be randomised, bits that are 1 should
  *	be taken from the @mac_addr
+ * @bssid: BSSID to scan for (most commonly, the wildcard BSSID)
  */
 struct cfg80211_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1465,12 +1450,13 @@ struct cfg80211_scan_request {
 	size_t ie_len;
 	u32 flags;
 
-	u32 rates[IEEE80211_NUM_BANDS];
+	u32 rates[NUM_NL80211_BANDS];
 
 	struct wireless_dev *wdev;
 
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+	u8 bssid[ETH_ALEN] __aligned(2);
 
 	/* internal */
 	struct wiphy *wiphy;
@@ -1617,7 +1603,7 @@ struct cfg80211_inform_bss {
 };
 
 /**
- * struct cfg80211_bss_ie_data - BSS entry IE data
+ * struct cfg80211_bss_ies - BSS entry IE data
  * @tsf: TSF contained in the frame that carried these IEs
  * @rcu_head: internal use, for freeing
  * @len: length of the IEs
@@ -1746,7 +1732,12 @@ enum cfg80211_assoc_req_flags {
  * @ie_len: Length of ie buffer in octets
  * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
  * @crypto: crypto settings
- * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
+ * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used
+ *	to indicate a request to reassociate within the ESS instead of a request
+ *	do the initial association with the ESS. When included, this is set to
+ *	the BSSID of the current association, i.e., to the value that is
+ *	included in the Current AP address field of the Reassociation Request
+ *	frame.
  * @flags:  See &enum cfg80211_assoc_req_flags
  * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
  *	will be used in ht_capa.  Un-supported values will be ignored.
@@ -1851,12 +1842,39 @@ struct cfg80211_ibss_params {
 	bool privacy;
 	bool control_port;
 	bool userspace_handles_dfs;
-	int mcast_rate[IEEE80211_NUM_BANDS];
+	int mcast_rate[NUM_NL80211_BANDS];
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
 };
 
 /**
+ * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment.
+ *
+ * @band: band of BSS which should match for RSSI level adjustment.
+ * @delta: value of RSSI level adjustment.
+ */
+struct cfg80211_bss_select_adjust {
+	enum nl80211_band band;
+	s8 delta;
+};
+
+/**
+ * struct cfg80211_bss_selection - connection parameters for BSS selection.
+ *
+ * @behaviour: requested BSS selection behaviour.
+ * @param: parameters for requestion behaviour.
+ * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF.
+ * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST.
+ */
+struct cfg80211_bss_selection {
+	enum nl80211_bss_select_attr behaviour;
+	union {
+		enum nl80211_band band_pref;
+		struct cfg80211_bss_select_adjust adjust;
+	} param;
+};
+
+/**
  * struct cfg80211_connect_params - Connection parameters
  *
  * This structure provides information needed to complete IEEE 802.11
@@ -1893,6 +1911,13 @@ struct cfg80211_ibss_params {
  * @vht_capa_mask: The bits of vht_capa which are to be used.
  * @pbss: if set, connect to a PCP instead of AP. Valid for DMG
  *	networks.
+ * @bss_select: criteria to be used for BSS selection.
+ * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used
+ *	to indicate a request to reassociate within the ESS instead of a request
+ *	do the initial association with the ESS. When included, this is set to
+ *	the BSSID of the current association, i.e., to the value that is
+ *	included in the Current AP address field of the Reassociation Request
+ *	frame.
  */
 struct cfg80211_connect_params {
 	struct ieee80211_channel *channel;
@@ -1916,6 +1941,8 @@ struct cfg80211_connect_params {
 	struct ieee80211_vht_cap vht_capa;
 	struct ieee80211_vht_cap vht_capa_mask;
 	bool pbss;
+	struct cfg80211_bss_selection bss_select;
+	const u8 *prev_bssid;
 };
 
 /**
@@ -1945,7 +1972,7 @@ struct cfg80211_bitrate_mask {
 		u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
 		u16 vht_mcs[NL80211_VHT_NSS_MAX];
 		enum nl80211_txrate_gi gi;
-	} control[IEEE80211_NUM_BANDS];
+	} control[NUM_NL80211_BANDS];
 };
 /**
  * struct cfg80211_pmksa - PMK Security Association
@@ -2342,7 +2369,17 @@ struct cfg80211_qos_map {
  * @connect: Connect to the ESS with the specified parameters. When connected,
  *	call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
  *	If the connection fails for some reason, call cfg80211_connect_result()
- *	with the status from the AP.
+ *	with the status from the AP. The driver is allowed to roam to other
+ *	BSSes within the ESS when the other BSS matches the connect parameters.
+ *	When such roaming is initiated by the driver, the driver is expected to
+ *	verify that the target matches the configured security parameters and
+ *	to use Reassociation Request frame instead of Association Request frame.
+ *	The connect function can also be used to request the driver to perform
+ *	a specific roam when connected to an ESS. In that case, the prev_bssid
+ *	parameter is set to the BSSID of the currently associated BSS as an
+ *	indication of requesting reassociation. In both the driver-initiated and
+ *	new connect() call initiated roaming cases, the result of roaming is
+ *	indicated with a call to cfg80211_roamed() or cfg80211_roamed_bss().
  *	(invoked with the wireless_dev mutex held)
  * @disconnect: Disconnect from the BSS/ESS.
  *	(invoked with the wireless_dev mutex held)
@@ -2622,7 +2659,7 @@ struct cfg80211_ops {
 	int	(*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
 
 	int	(*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev,
-				  int rate[IEEE80211_NUM_BANDS]);
+				  int rate[NUM_NL80211_BANDS]);
 
 	int	(*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
 
@@ -3152,6 +3189,9 @@ struct wiphy_vendor_command {
  * @vht_capa_mod_mask:  Specify what VHT capabilities can be over-ridden.
  *	If null, then none can be over-ridden.
  *
+ * @wdev_list: the list of associated (virtual) interfaces; this list must
+ *	not be modified by the driver, but can be read with RTNL/RCU protection.
+ *
  * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
  *	supports for ACL.
  *
@@ -3184,6 +3224,9 @@ struct wiphy_vendor_command {
  *	low rssi when a frame is heard on different channel, then it should set
  *	this variable to the maximal offset for which it can compensate.
  *	This value should be set in MHz.
+ * @bss_select_support: bitmask indicating the BSS selection criteria supported
+ *	by the driver in the .connect() callback. The bit position maps to the
+ *	attribute indices defined in &enum nl80211_bss_select_attr.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -3265,7 +3308,7 @@ struct wiphy {
 	 * help determine whether you own this wiphy or not. */
 	const void *privid;
 
-	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+	struct ieee80211_supported_band *bands[NUM_NL80211_BANDS];
 
 	/* Lets us get back the wiphy on the callback */
 	void (*reg_notifier)(struct wiphy *wiphy,
@@ -3288,6 +3331,8 @@ struct wiphy {
 	const struct ieee80211_ht_cap *ht_capa_mod_mask;
 	const struct ieee80211_vht_cap *vht_capa_mod_mask;
 
+	struct list_head wdev_list;
+
 	/* the network namespace this phy lives in currently */
 	possible_net_t _net;
 
@@ -3306,6 +3351,8 @@ struct wiphy {
 	u8 max_num_csa_counters;
 	u8 max_adj_channel_rssi_comp;
 
+	u32 bss_select_support;
+
 	char priv[0] __aligned(NETDEV_ALIGN);
 };
 
@@ -3598,7 +3645,7 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
  * @band: band, necessary due to channel number overlap
  * Return: The corresponding frequency (in MHz), or 0 if the conversion failed.
  */
-int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band);
+int ieee80211_channel_to_frequency(int chan, enum nl80211_band band);
 
 /**
  * ieee80211_frequency_to_channel - convert frequency to channel number
@@ -3851,7 +3898,7 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
  * cfg80211_find_vendor_ie - find vendor specific information element in data
  *
  * @oui: vendor OUI
- * @oui_type: vendor-specific OUI type
+ * @oui_type: vendor-specific OUI type (must be < 0xff), negative means any
  * @ies: data consisting of IEs
  * @len: length of data
  *
@@ -3863,7 +3910,7 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
  * Note: There are no checks on the element length other than having to fit into
  * the given data.
  */
-const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
+const u8 *cfg80211_find_vendor_ie(unsigned int oui, int oui_type,
 				  const u8 *ies, int len);
 
 /**
@@ -4610,6 +4657,32 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
 #endif
 
 /**
+ * cfg80211_connect_bss - notify cfg80211 of connection result
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the AP
+ * @bss: entry of bss to which STA got connected to, can be obtained
+ *	through cfg80211_get_bss (may be %NULL)
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @status: status code, 0 for successful connection, use
+ *      %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
+ *      the real status code for failures.
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever connect() has
+ * succeeded. This is similar to cfg80211_connect_result(), but with the
+ * option of identifying the exact bss entry for the connection. Only one of
+ * these functions should be called.
+ */
+void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
+			  struct cfg80211_bss *bss, const u8 *req_ie,
+			  size_t req_ie_len, const u8 *resp_ie,
+			  size_t resp_ie_len, u16 status, gfp_t gfp);
+
+/**
  * cfg80211_connect_result - notify cfg80211 of connection result
  *
  * @dev: network device
@@ -4626,10 +4699,15 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
  * It should be called by the underlying driver whenever connect() has
  * succeeded.
  */
-void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
-			     const u8 *req_ie, size_t req_ie_len,
-			     const u8 *resp_ie, size_t resp_ie_len,
-			     u16 status, gfp_t gfp);
+static inline void
+cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+			const u8 *req_ie, size_t req_ie_len,
+			const u8 *resp_ie, size_t resp_ie_len,
+			u16 status, gfp_t gfp)
+{
+	cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, resp_ie,
+			     resp_ie_len, status, gfp);
+}
 
 /**
  * cfg80211_roamed - notify cfg80211 of roaming
@@ -5029,7 +5107,7 @@ void cfg80211_ch_switch_started_notify(struct net_device *dev,
  * Returns %true if the conversion was successful, %false otherwise.
  */
 bool ieee80211_operating_class_to_band(u8 operating_class,
-				       enum ieee80211_band *band);
+				       enum nl80211_band *band);
 
 /**
  * ieee80211_chandef_to_operating_class - convert chandef to operation class