Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

1 files changed, 42 insertions, 11 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 04d4516f9c71..e86ed59f9ad5 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -201,13 +201,13 @@ enum nl80211_commands {
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
  * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
- * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
  *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
- *	NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
  *		this attribute)
- *	NL80211_SEC_CHAN_DISABLED = HT20 only
- *	NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel
- *	NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel
+ *	NL80211_CHAN_HT20 = HT20 only
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -344,7 +344,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_WIPHY_TXQ_PARAMS,
 	NL80211_ATTR_WIPHY_FREQ,
-	NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET,
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -425,6 +425,32 @@ enum nl80211_sta_flags {
 };
 
 /**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+	__NL80211_RATE_INFO_INVALID,
+	NL80211_RATE_INFO_BITRATE,
+	NL80211_RATE_INFO_MCS,
+	NL80211_RATE_INFO_40_MHZ_WIDTH,
+	NL80211_RATE_INFO_SHORT_GI,
+
+	/* keep last */
+	__NL80211_RATE_INFO_AFTER_LAST,
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_sta_info - station information
  *
  * These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -436,6 +462,9 @@ enum nl80211_sta_flags {
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * 	containing info as possible, see &enum nl80211_sta_info_txrate.
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -445,6 +474,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_LLID,
 	NL80211_STA_INFO_PLID,
 	NL80211_STA_INFO_PLINK_STATE,
+	NL80211_STA_INFO_SIGNAL,
+	NL80211_STA_INFO_TX_BITRATE,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -774,10 +805,10 @@ enum nl80211_txq_q {
 	NL80211_TXQ_Q_BK
 };
 
-enum nl80211_sec_chan_offset {
-	NL80211_SEC_CHAN_NO_HT /* No HT */,
-	NL80211_SEC_CHAN_DISABLED /* HT20 only */,
-	NL80211_SEC_CHAN_BELOW /* HT40- */,
-	NL80211_SEC_CHAN_ABOVE /* HT40+ */
+enum nl80211_channel_type {
+	NL80211_CHAN_NO_HT,
+	NL80211_CHAN_HT20,
+	NL80211_CHAN_HT40MINUS,
+	NL80211_CHAN_HT40PLUS
 };
 #endif /* __LINUX_NL80211_H */