Merge branch 'topic/min' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-change

3 files changed, 73 insertions, 3 deletions

diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h
index 147293b4471d..f87a6c172a91 100644
--- a/include/linux/mfd/da9055/pdata.h
+++ b/include/linux/mfd/da9055/pdata.h
@@ -25,8 +25,29 @@ struct da9055_pdata {
 	int gpio_base;
 
 	struct regulator_init_data *regulators[DA9055_MAX_REGULATORS];
-	bool reset_enable;		/* Enable RTC in RESET Mode */
-	enum gpio_select *gpio_rsel;	/* Select regulator set thru GPIO 1/2 */
-	enum gpio_select *gpio_ren;	/* Enable regulator thru GPIO 1/2 */
+	/* Enable RTC in RESET Mode */
+	bool reset_enable;
+	/*
+	 * GPI muxed pin to control
+	 * regulator state A/B, 0 if not available.
+	 */
+	int *gpio_ren;
+	/*
+	 * GPI muxed pin to control
+	 * regulator set, 0 if not available.
+	 */
+	int *gpio_rsel;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * that controls the regulator state, 0 if not available.
+	 */
+	enum gpio_select *reg_ren;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * controls the regulator set A/B, 0 if  not available.
+	 */
+	enum gpio_select *reg_rsel;
+	/* GPIOs to enable regulator, 0 if not available */
+	int *ena_gpio;
 };
 #endif /* __DA9055_PDATA_H */
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 7932a3bf21bd..d9ce98a5028b 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -185,6 +185,7 @@ enum regulator_type {
  *
  * @min_uV: Voltage given by the lowest selector (if linear mapping)
  * @uV_step: Voltage increase with each selector (if linear mapping)
+ * @linear_min_sel: Minimal selector for starting linear mapping
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @volt_table: Voltage mapping table (if table based mapping)
  *
@@ -207,6 +208,7 @@ struct regulator_desc {
 
 	unsigned int min_uV;
 	unsigned int uV_step;
+	unsigned int linear_min_sel;
 	unsigned int ramp_delay;
 
 	const unsigned int *volt_table;
diff --git a/include/linux/regulator/tps51632-regulator.h b/include/linux/regulator/tps51632-regulator.h
new file mode 100644
index 000000000000..d00841e1a75a
--- /dev/null
+++ b/include/linux/regulator/tps51632-regulator.h
@@ -0,0 +1,47 @@
+/*
+ * tps51632-regulator.h -- TPS51632 regulator
+ *
+ * Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down
+ * Driverless Controller with serial VID control and DVFS.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_TPS51632_H
+#define __LINUX_REGULATOR_TPS51632_H
+
+/*
+ * struct tps51632_regulator_platform_data - tps51632 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_pwm_dvfs: Enable PWM DVFS or not.
+ * @dvfs_step_20mV: Step for DVFS is 20mV or 10mV.
+ * @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode.
+ * @base_voltage_uV: Base voltage when PWM-DVFS enabled.
+ */
+struct tps51632_regulator_platform_data {
+	struct regulator_init_data *reg_init_data;
+	bool enable_pwm_dvfs;
+	bool dvfs_step_20mV;
+	int max_voltage_uV;
+	int base_voltage_uV;
+};
+
+#endif /* __LINUX_REGULATOR_TPS51632_H */