Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Enable Configuration RRS SV, which makes device readiness visible,
     early instead of during child bus scanning (Bjorn Helgaas)

   - Log debug messages about reset methods being used (Bjorn Helgaas)

   - Avoid reset when it has been disabled via sysfs (Nishanth
     Aravamudan)

   - Add common pci-ep-bus.yaml schema for exporting several peripherals
     of a single PCI function via devicetree (Andrea della Porta)

   - Create DT nodes for PCI host bridges to enable loading device tree
     overlays to create platform devices for PCI devices that have
     several features that require multiple drivers (Herve Codina)

  Resource management:

   - Enlarge devres table[] to accommodate bridge windows, ROM, IOV
     BARs, etc., and validate BAR index in devres interfaces (Philipp
     Stanner)

   - Fix typo that repeatedly distributed resources to a bridge instead
     of iterating over subordinate bridges, which resulted in too little
     space to assign some BARs (Kai-Heng Feng)

   - Relax bridge window tail sizing for optional resources, e.g., IOV
     BARs, to avoid failures when removing and re-adding devices (Ilpo
     Järvinen)

   - Allow drivers to enable devices even if we haven't assigned
     optional IOV resources to them (Ilpo Järvinen)

   - Rework handling of optional resources (IOV BARs, ROMs) to reduce
     failures if we can't allocate them (Ilpo Järvinen)

   - Fix a NULL dereference in the SR-IOV VF creation error path (Shay
     Drory)

   - Fix s390 mmio_read/write syscalls, which didn't cause page faults
     in some cases, which broke vfio-pci lazy mapping on first access
     (Niklas Schnelle)

   - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
     was disabled only for s390 (Niklas Schnelle)

   - Support mmap of PCI resources on s390 except for ISM devices
     (Niklas Schnelle)

  ASPM:

   - Delay pcie_link_state deallocation to avoid dangling pointers that
     cause invalid references during hot-unplug (Daniel Stodden)

  Power management:

   - Allow PCI bridges to go to D3Hot when suspending on all non-x86
     systems (Manivannan Sadhasivam)

  Power control:

   - Create pwrctrl devices in pci_scan_device() to make it more
     symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
     for PCI bridges possible (Manivannan Sadhasivam)

   - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
     can still access devices after pci_stop_dev() (Manivannan
     Sadhasivam)

   - If there's a pwrctrl device for a PCI device, skip scanning it
     because the pwrctrl core will rescan the bus after the device is
     powered on (Manivannan Sadhasivam)

   - Add a pwrctrl driver for PCI slots based on voltage regulators
     described via devicetree (Manivannan Sadhasivam)

  Bandwidth control:

   - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
     set_pcie_cooling_state.sh test case (Yi Lai)

   - Avoid a NULL pointer dereference when we run out of bus numbers to
     assign for a bridge secondary bus (Lukas Wunner)

  Hotplug:

   - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
     NULL pointer checks (Lukas Wunner)

   - Drop shpchp module init/exit logging, replace shpchp dbg() with
     ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
     (Ilpo Järvinen)

   - Drop 'shpchp_debug' module parameter in favor of standard dynamic
     debugging (Ilpo Järvinen)

   - Drop unused cpcihp .get_power(), .set_power() function pointers
     (Guilherme Giacomo Simoes)

   - Disable hotplug interrupts in portdrv only when pciehp is not
     enabled to avoid issuing two hotplug commands too close together
     (Feng Tang)

   - Skip pciehp 'device replaced' check if the device has been removed
     to address a deadlock when resuming after a device was removed
     during system sleep (Lukas Wunner)

   - Don't enable pciehp hotplug interupt when resuming in poll mode
     (Ilpo Järvinen)

  Virtualization:

   - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
     Dave)

  DOE:

   - Expose supported DOE features via sysfs (Alistair Francis)

   - Allow DOE support to be enabled even if CXL isn't enabled (Alistair
     Francis)

  Endpoint framework:

   - Convert PCI device data so pci-epf-test works correctly on
     big-endian endpoint systems (Niklas Cassel)

   - Add BAR_RESIZABLE type to endpoint framework and add DWC core
     support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
     Cassel)

   - Fix pci-epf-test double free that causes an oops if the host
     reboots and PERST# deassertion restarts endpoint BAR allocation
     (Christian Bruel)

   - Fix endpoint BAR testing so tests can skip disabled BARs instead of
     reporting them as failures (Niklas Cassel)

   - Widen endpoint test BAR size variable to accommodate BARs larger
     than INT_MAX (Niklas Cassel)

   - Remove unused tools 'pci' build target left over after moving tests
     to tools/testing/selftests/pci_endpoint (Jianfeng Liu)

  Altera PCIe controller driver:

   - Add DT binding and driver support for Agilex family (P-Tile,
     F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)

  AMD MDB PCIe controller driver:

   - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
     (Thippeswamy Havalige)

  Broadcom STB PCIe controller driver:

   - Add BCM2712 MSI-X DT binding and interrupt controller drivers and
     add softdep on irq_bcm2712_mip driver to ensure that it is loaded
     first (Stanimir Varbanov)

   - Expand inbound window map to 64GB so it can accommodate BCM2712
     (Stanimir Varbanov)

   - Add BCM2712 support and DT updates (Stanimir Varbanov)

   - Apply link speed restriction before bringing link up, not after
     (Jim Quinlan)

   - Update Max Link Speed in Link Capabilities via the internal
     writable register, not the read-only config register (Jim Quinlan)

   - Handle regulator_bulk_get() error to avoid panic when we call
     regulator_bulk_free() later (Jim Quinlan)

   - Disable regulators only when removing the bus immediately below a
     Root Port because we don't support regulators deeper in the
     hierarchy (Jim Quinlan)

   - Make const read-only arrays static (Colin Ian King)

  Cadence PCIe endpoint driver:

   - Correct MSG TLP generation so endpoints can generate INTx messages
     (Hans Zhang)

  Freescale i.MX6 PCIe controller driver:

   - Identify the second controller on i.MX8MQ based on devicetree
     'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)

   - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
     ATU input address (using parent_bus_offset) from devicetree (Frank
     Li)

  Freescale Layerscape PCIe controller driver:

   - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
     unnecessary 'status' from example (Krzysztof Kozlowski)

   - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
     arg_count to fix probe failure on LS1043A (Ioana Ciornei)

  HiSilicon STB PCIe controller driver:

   - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
     JAILLET)

  Intel Gateway PCIe controller driver:

   - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
     input address (using parent_bus_offset) from devicetree (Frank Li)

  Intel VMD host bridge driver:

   - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
     pci_ops.read() will never sleep, even on PREEMPT_RT where
     spinlock_t becomes a sleepable lock, to avoid calling a sleeping
     function from invalid context (Ryo Takakura)

  MediaTek PCIe Gen3 controller driver:

   - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
     Bianconi)

   - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
     program host bridge memory aperture to this syscon node (Lorenzo
     Bianconi)

  Qualcomm PCIe controller driver:

   - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)

   - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
     Stein)

   - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
     Baryshkov)

   - Make DT iommu property required for SA8775P and prohibited for
     SDX55 (Dmitry Baryshkov)

   - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
     Baryshkov)

   - Add endpoint DT properties for SAR2130P and enable endpoint mode in
     driver (Dmitry Baryshkov)

   - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
     RESERVED (Manivannan Sadhasivam)

  Rockchip DesignWare PCIe controller driver:

   - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
     Cassel)

  Synopsys DesignWare PCIe controller driver:

   - Add debugfs-based Silicon Debug, Error Injection, Statistical
     Counter support for DWC (Shradha Todi)

   - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
     Zhang)

   - Add Rockchip support for DWC debugfs features (Niklas Cassel)

   - Add dw_pcie_parent_bus_offset() to look up the parent bus address
     of a specified 'reg' property and return the offset from the CPU
     physical address (Frank Li)

   - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
     via 'reg[config]' for host controllers and 'reg[addr_space]' for
     endpoint controllers (Frank Li)

   - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
     of .cpu_addr_fixup() when programming ATU (Frank Li)

  TI J721E PCIe driver:

   - Correct the 'link down' interrupt bit for J784S4 (Siddharth
     Vadapalli)

  TI Keystone PCIe controller driver:

   - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
     alignment requirement from 1MB to 64KB (Niklas Cassel)

  Xilinx Versal CPM PCIe controller driver:

   - Free IRQ domain in probe error path to avoid leaking it
     (Thippeswamy Havalige)

   - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
     Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)

   - Add driver support for CPM5_HOST1 (Thippeswamy Havalige)

  Miscellaneous:

   - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)

   - Use for_each_available_child_of_node_scoped() to simplify apple,
     kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"

* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
  PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
  PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
  misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
  PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
  PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
  PCI: endpoint: Add intx_capable to epc_features struct
  dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
  PCI: intel-gw: Remove intel_pcie_cpu_addr()
  PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
  PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
  PCI: dwc: ep: Ensure proper iteration over outbound map windows
  PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
  PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
  PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
  PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
  PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
  PCI: dwc: Add dw_pcie_parent_bus_offset()
  PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
  PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
  PCI: brcmstb: Make const read-only arrays static
  ...

8 files changed, 72 insertions, 24 deletions

diff --git a/include/linux/aer.h b/include/linux/aer.h
index 947b63091902..02940be66324 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -22,12 +22,20 @@
  */
 #define PCIE_STD_NUM_TLP_HEADERLOG     4
 #define PCIE_STD_MAX_TLP_PREFIXLOG     4
+#define PCIE_STD_MAX_TLP_HEADERLOG	(PCIE_STD_NUM_TLP_HEADERLOG + 10)
 
 struct pci_dev;
 
 struct pcie_tlp_log {
-	u32 dw[PCIE_STD_NUM_TLP_HEADERLOG];
-	u32 prefix[PCIE_STD_MAX_TLP_PREFIXLOG];
+	union {
+		u32 dw[PCIE_STD_MAX_TLP_HEADERLOG];
+		struct {
+			u32 _do_not_use[PCIE_STD_NUM_TLP_HEADERLOG];
+			u32 prefix[PCIE_STD_MAX_TLP_PREFIXLOG];
+		};
+	};
+	u8 header_len;		/* Length of the Logged TLP Header in DWORDs */
+	bool flit;		/* TLP was logged when in Flit mode */
 };
 
 struct aer_capability_regs {
diff --git a/include/linux/device.h b/include/linux/device.h
index 1655be8bda14..e3d56cd13fea 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1083,6 +1083,8 @@ int device_online(struct device *dev);
 void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
 void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
 void device_set_node(struct device *dev, struct fwnode_handle *fwnode);
+int device_add_of_node(struct device *dev, struct device_node *of_node);
+void device_remove_of_node(struct device *dev);
 void device_set_of_node_from_dev(struct device *dev, const struct device *dev2);
 
 static inline struct device_node *dev_of_node(struct device *dev)
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index e818e3fdcded..82837008b56f 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -188,11 +188,15 @@ struct pci_epc {
  * enum pci_epc_bar_type - configurability of endpoint BAR
  * @BAR_PROGRAMMABLE: The BAR mask can be configured by the EPC.
  * @BAR_FIXED: The BAR mask is fixed by the hardware.
+ * @BAR_RESIZABLE: The BAR implements the PCI-SIG Resizable BAR Capability.
+ *		   NOTE: An EPC driver can currently only set a single supported
+ *		   size.
  * @BAR_RESERVED: The BAR should not be touched by an EPF driver.
  */
 enum pci_epc_bar_type {
 	BAR_PROGRAMMABLE = 0,
 	BAR_FIXED,
+	BAR_RESIZABLE,
 	BAR_RESERVED,
 };
 
@@ -221,6 +225,7 @@ struct pci_epc_bar_desc {
  * @linkup_notifier: indicate if the EPC device can notify EPF driver on link up
  * @msi_capable: indicate if the endpoint function has MSI capability
  * @msix_capable: indicate if the endpoint function has MSI-X capability
+ * @intx_capable: indicate if the endpoint can raise INTx interrupts
  * @bar: array specifying the hardware description for each BAR
  * @align: alignment size required for BAR buffer allocation
  */
@@ -228,6 +233,7 @@ struct pci_epc_features {
 	unsigned int	linkup_notifier : 1;
 	unsigned int	msi_capable : 1;
 	unsigned int	msix_capable : 1;
+	unsigned int	intx_capable : 1;
 	struct	pci_epc_bar_desc bar[PCI_STD_NUM_BARS];
 	size_t	align;
 };
@@ -257,7 +263,6 @@ __devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
 struct pci_epc *
 __pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
 		 struct module *owner);
-void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc);
 void pci_epc_destroy(struct pci_epc *epc);
 int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf,
 		    enum pci_epc_interface_type type);
@@ -271,6 +276,7 @@ void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf,
 			enum pci_epc_interface_type type);
 int pci_epc_write_header(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			 struct pci_epf_header *hdr);
+int pci_epc_bar_size_to_rebar_cap(size_t size, u32 *cap);
 int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		    struct pci_epf_bar *epf_bar);
 void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index ee6156bcbbd0..879d19cebd4f 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -38,7 +38,7 @@ enum pci_barno {
  * @baseclass_code: broadly classifies the type of function the device performs
  * @cache_line_size: specifies the system cacheline size in units of DWORDs
  * @subsys_vendor_id: vendor of the add-in card or subsystem
- * @subsys_id: id specific to vendor
+ * @subsys_id: ID specific to vendor
  * @interrupt_pin: interrupt pin the device (or device function) uses
  */
 struct pci_epf_header {
@@ -59,7 +59,7 @@ struct pci_epf_header {
  * @bind: ops to perform when a EPC device has been bound to EPF device
  * @unbind: ops to perform when a binding has been lost between a EPC device
  *	    and EPF device
- * @add_cfs: ops to initialize function specific configfs attributes
+ * @add_cfs: ops to initialize function-specific configfs attributes
  */
 struct pci_epf_ops {
 	int	(*bind)(struct pci_epf *epf);
@@ -138,7 +138,7 @@ struct pci_epf_bar {
  * @epc: the EPC device to which this EPF device is bound
  * @epf_pf: the physical EPF device to which this virtual EPF device is bound
  * @driver: the EPF driver to which this EPF device is bound
- * @id: Pointer to the EPF device ID
+ * @id: pointer to the EPF device ID
  * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
  * @lock: mutex to protect pci_epf_ops
  * @sec_epc: the secondary EPC device to which this EPF device is bound
@@ -151,7 +151,7 @@ struct pci_epf_bar {
  * @is_vf: true - virtual function, false - physical function
  * @vfunction_num_map: bitmap to manage virtual function number
  * @pci_vepf: list of virtual endpoint functions associated with this function
- * @event_ops: Callbacks for capturing the EPC events
+ * @event_ops: callbacks for capturing the EPC events
  */
 struct pci_epf {
 	struct device		dev;
@@ -185,11 +185,12 @@ struct pci_epf {
 };
 
 /**
- * struct pci_epf_msix_tbl - represents the MSIX table entry structure
- * @msg_addr: Writes to this address will trigger MSIX interrupt in host
- * @msg_data: Data that should be written to @msg_addr to trigger MSIX interrupt
+ * struct pci_epf_msix_tbl - represents the MSI-X table entry structure
+ * @msg_addr: Writes to this address will trigger MSI-X interrupt in host
+ * @msg_data: Data that should be written to @msg_addr to trigger MSI-X
+ *   interrupt
  * @vector_ctrl: Identifies if the function is prohibited from sending a message
- * using this MSIX table entry
+ *   using this MSI-X table entry
  */
 struct pci_epf_msix_tbl {
 	u64 msg_addr;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 47b31ad724fa..0e8e3fd77e96 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -353,6 +353,7 @@ struct pci_dev {
 	struct pci_dev  *rcec;          /* Associated RCEC device */
 #endif
 	u32		devcap;		/* PCIe Device Capabilities */
+	u16		rebar_cap;	/* Resizable BAR capability offset */
 	u8		pcie_cap;	/* PCIe capability offset */
 	u8		msi_cap;	/* MSI capability offset */
 	u8		msix_cap;	/* MSI-X capability offset */
@@ -476,6 +477,7 @@ struct pci_dev {
 	unsigned int	no_command_memory:1;	/* No PCI_COMMAND_MEMORY */
 	unsigned int	rom_bar_overlap:1;	/* ROM BAR disable broken */
 	unsigned int	rom_attr_enabled:1;	/* Display of ROM attribute enabled? */
+	unsigned int	non_mappable_bars:1;	/* BARs can't be mapped to user-space  */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
@@ -681,6 +683,7 @@ struct pci_bus {
 	struct bin_attribute	*legacy_mem;	/* Legacy mem */
 	unsigned int		is_added:1;
 	unsigned int		unsafe_warn:1;	/* warned about RW1C config write */
+	unsigned int		flit_mode:1;	/* Link in Flit mode */
 };
 
 #define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
@@ -1396,7 +1399,6 @@ void pci_reset_secondary_bus(struct pci_dev *dev);
 void pcibios_reset_secondary_bus(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
-int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
 void pci_release_resource(struct pci_dev *dev, int resno);
 static inline int pci_rebar_bytes_to_size(u64 bytes)
 {
@@ -1455,7 +1457,6 @@ void set_pcie_port_type(struct pci_dev *pdev);
 void set_pcie_hotplug_bridge(struct pci_dev *pdev);
 
 /* Functions for PCI Hotplug drivers to use */
-unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge);
 unsigned int pci_rescan_bus(struct pci_bus *bus);
 void pci_lock_rescan_remove(void);
 void pci_unlock_rescan_remove(void);
@@ -1477,7 +1478,6 @@ void pci_assign_unassigned_resources(void);
 void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
 void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
 void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus);
-int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type);
 int pci_enable_resources(struct pci_dev *, int mask);
 void pci_assign_irq(struct pci_dev *dev);
 struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res);
@@ -1637,7 +1637,6 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata);
 int pci_cfg_space_size(struct pci_dev *dev);
 unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-void pci_setup_bridge(struct pci_bus *bus);
 resource_size_t pcibios_window_alignment(struct pci_bus *bus,
 					 unsigned long type);
 
@@ -2336,8 +2335,6 @@ extern int pci_pci_problems;
 #define PCIPCI_ALIMAGIK		32	/* Need low latency setting */
 #define PCIAGP_FAIL		64	/* No PCI to AGP DMA */
 
-extern unsigned long pci_cardbus_io_size;
-extern unsigned long pci_cardbus_mem_size;
 extern u8 pci_dfl_cache_line_size;
 extern u8 pci_cache_line_size;
 
@@ -2447,11 +2444,6 @@ static inline resource_size_t pci_iov_resource_size(struct pci_dev *dev, int res
 static inline void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool probe) { }
 #endif
 
-#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
-void pci_hp_create_module_link(struct pci_slot *pci_slot);
-void pci_hp_remove_module_link(struct pci_slot *pci_slot);
-#endif
-
 /**
  * pci_pcie_cap - get the saved PCIe capability offset
  * @dev: PCI device
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 3a10d6ec3ee7..ec77ccf1fc4d 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -50,7 +50,6 @@ struct hotplug_slot_ops {
 /**
  * struct hotplug_slot - used to register a physical slot with the hotplug pci core
  * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
- * @slot_list: internal list used to track hotplug PCI slots
  * @pci_slot: represents a physical slot
  * @owner: The module owner of this structure
  * @mod_name: The module name (KBUILD_MODNAME) of this structure
@@ -59,7 +58,6 @@ struct hotplug_slot {
 	const struct hotplug_slot_ops	*ops;
 
 	/* Variables below this are for use only by the hotplug pci core. */
-	struct list_head		slot_list;
 	struct pci_slot			*pci_slot;
 	struct module			*owner;
 	const char			*mod_name;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 41dfb3b0d9b9..2e28182c3af0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -518,6 +518,7 @@
 #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM	0x0251
 #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
+#define PCI_DEVICE_ID_IBM_ISM		0x04ed
 
 #define PCI_SUBVENDOR_ID_IBM		0x1014
 #define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT	0x03d4
@@ -2610,6 +2611,8 @@
 
 #define PCI_VENDOR_ID_ZHAOXIN		0x1d17
 
+#define PCI_VENDOR_ID_ROCKCHIP		0x1d87
+
 #define PCI_VENDOR_ID_HYGON		0x1d94
 
 #define PCI_VENDOR_ID_META		0x1d9b
diff --git a/include/linux/pcie-dwc.h b/include/linux/pcie-dwc.h
new file mode 100644
index 000000000000..8ff778e7aec0
--- /dev/null
+++ b/include/linux/pcie-dwc.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021-2023 Alibaba Inc.
+ * Copyright (C) 2025 Linaro Ltd.
+ *
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#ifndef LINUX_PCIE_DWC_H
+#define LINUX_PCIE_DWC_H
+
+#include <linux/pci_ids.h>
+
+struct dwc_pcie_vsec_id {
+	u16 vendor_id;
+	u16 vsec_id;
+	u8 vsec_rev;
+};
+
+/*
+ * VSEC IDs are allocated by the vendor, so a given ID may mean different
+ * things to different vendors.  See PCIe r6.0, sec 7.9.5.2.
+ */
+static const struct dwc_pcie_vsec_id dwc_pcie_rasdes_vsec_ids[] = {
+	{ .vendor_id = PCI_VENDOR_ID_ALIBABA,
+	  .vsec_id = 0x02, .vsec_rev = 0x4 },
+	{ .vendor_id = PCI_VENDOR_ID_AMPERE,
+	  .vsec_id = 0x02, .vsec_rev = 0x4 },
+	{ .vendor_id = PCI_VENDOR_ID_QCOM,
+	  .vsec_id = 0x02, .vsec_rev = 0x4 },
+	{ .vendor_id = PCI_VENDOR_ID_ROCKCHIP,
+	  .vsec_id = 0x02, .vsec_rev = 0x4 },
+	{ .vendor_id = PCI_VENDOR_ID_SAMSUNG,
+	  .vsec_id = 0x02, .vsec_rev = 0x4 },
+	{}
+};
+
+#endif /* LINUX_PCIE_DWC_H */