Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.11

There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.

This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.

 - Lots more cleanups and simplifications from Morimoto-san.
 - Support for some basic DPCM systems in the audio graph card from
   Sameer Pujar.
 - Remove some old pre-DT Freescale drivers for platforms that are now
   DT only.
 - Move selection of which Intel DSP implementation to use to boot time
   rather than requiring it to be selected at build time.
 - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
   Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
   Qualcomm SM8250 and simple GPIO based muxes.

6 files changed, 156 insertions, 44 deletions

diff --git a/include/linux/auxiliary_bus.h b/include/linux/auxiliary_bus.h
new file mode 100644
index 000000000000..fc51d45f106b
--- /dev/null
+++ b/include/linux/auxiliary_bus.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019-2020 Intel Corporation
+ *
+ * Please see Documentation/driver-api/auxiliary_bus.rst for more information.
+ */
+
+#ifndef _AUXILIARY_BUS_H_
+#define _AUXILIARY_BUS_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct auxiliary_device {
+	struct device dev;
+	const char *name;
+	u32 id;
+};
+
+struct auxiliary_driver {
+	int (*probe)(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id);
+	void (*remove)(struct auxiliary_device *auxdev);
+	void (*shutdown)(struct auxiliary_device *auxdev);
+	int (*suspend)(struct auxiliary_device *auxdev, pm_message_t state);
+	int (*resume)(struct auxiliary_device *auxdev);
+	const char *name;
+	struct device_driver driver;
+	const struct auxiliary_device_id *id_table;
+};
+
+static inline struct auxiliary_device *to_auxiliary_dev(struct device *dev)
+{
+	return container_of(dev, struct auxiliary_device, dev);
+}
+
+static inline struct auxiliary_driver *to_auxiliary_drv(struct device_driver *drv)
+{
+	return container_of(drv, struct auxiliary_driver, driver);
+}
+
+int auxiliary_device_init(struct auxiliary_device *auxdev);
+int __auxiliary_device_add(struct auxiliary_device *auxdev, const char *modname);
+#define auxiliary_device_add(auxdev) __auxiliary_device_add(auxdev, KBUILD_MODNAME)
+
+static inline void auxiliary_device_uninit(struct auxiliary_device *auxdev)
+{
+	put_device(&auxdev->dev);
+}
+
+static inline void auxiliary_device_delete(struct auxiliary_device *auxdev)
+{
+	device_del(&auxdev->dev);
+}
+
+int __auxiliary_driver_register(struct auxiliary_driver *auxdrv, struct module *owner,
+				const char *modname);
+#define auxiliary_driver_register(auxdrv) \
+	__auxiliary_driver_register(auxdrv, THIS_MODULE, KBUILD_MODNAME)
+
+void auxiliary_driver_unregister(struct auxiliary_driver *auxdrv);
+
+/**
+ * module_auxiliary_driver() - Helper macro for registering an auxiliary driver
+ * @__auxiliary_driver: auxiliary driver struct
+ *
+ * Helper macro for auxiliary drivers which do not do anything special in
+ * module init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_auxiliary_driver(__auxiliary_driver) \
+	module_driver(__auxiliary_driver, auxiliary_driver_register, auxiliary_driver_unregister)
+
+struct auxiliary_device *auxiliary_find_device(struct device *start,
+					       const void *data,
+					       int (*match)(struct device *dev, const void *data));
+
+#endif /* _AUXILIARY_BUS_H_ */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 5b08a473cdba..c425290b21e2 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -838,4 +838,12 @@ struct mhi_device_id {
 	kernel_ulong_t driver_data;
 };
 
+#define AUXILIARY_NAME_SIZE 32
+#define AUXILIARY_MODULE_PREFIX "auxiliary:"
+
+struct auxiliary_device_id {
+	char name[AUXILIARY_NAME_SIZE];
+	kernel_ulong_t driver_data;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/platform_data/adau1977.h b/include/linux/platform_data/adau1977.h
deleted file mode 100644
index 86667235077a..000000000000
--- a/include/linux/platform_data/adau1977.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * ADAU1977/ADAU1978/ADAU1979 driver
- *
- * Copyright 2014 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_ADAU1977_H__
-#define __LINUX_PLATFORM_DATA_ADAU1977_H__
-
-/**
- * enum adau1977_micbias - ADAU1977 MICBIAS pin voltage setting
- * @ADAU1977_MICBIAS_5V0: MICBIAS is set to 5.0 V
- * @ADAU1977_MICBIAS_5V5: MICBIAS is set to 5.5 V
- * @ADAU1977_MICBIAS_6V0: MICBIAS is set to 6.0 V
- * @ADAU1977_MICBIAS_6V5: MICBIAS is set to 6.5 V
- * @ADAU1977_MICBIAS_7V0: MICBIAS is set to 7.0 V
- * @ADAU1977_MICBIAS_7V5: MICBIAS is set to 7.5 V
- * @ADAU1977_MICBIAS_8V0: MICBIAS is set to 8.0 V
- * @ADAU1977_MICBIAS_8V5: MICBIAS is set to 8.5 V
- * @ADAU1977_MICBIAS_9V0: MICBIAS is set to 9.0 V
- */
-enum adau1977_micbias {
-	ADAU1977_MICBIAS_5V0 = 0x0,
-	ADAU1977_MICBIAS_5V5 = 0x1,
-	ADAU1977_MICBIAS_6V0 = 0x2,
-	ADAU1977_MICBIAS_6V5 = 0x3,
-	ADAU1977_MICBIAS_7V0 = 0x4,
-	ADAU1977_MICBIAS_7V5 = 0x5,
-	ADAU1977_MICBIAS_8V0 = 0x6,
-	ADAU1977_MICBIAS_8V5 = 0x7,
-	ADAU1977_MICBIAS_9V0 = 0x8,
-};
-
-/**
- * struct adau1977_platform_data - Platform configuration data for the ADAU1977
- * @micbias: Specifies the voltage for the MICBIAS pin
- */
-struct adau1977_platform_data {
-	enum adau1977_micbias micbias;
-};
-
-#endif
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index e7834d98207f..a652d1474d6a 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -570,6 +570,10 @@ struct regmap *__regmap_init_sdw(struct sdw_slave *sdw,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
 				 const char *lock_name);
+struct regmap *__regmap_init_sdw_mbq(struct sdw_slave *sdw,
+				     const struct regmap_config *config,
+				     struct lock_class_key *lock_key,
+				     const char *lock_name);
 struct regmap *__regmap_init_spi_avmm(struct spi_device *spi,
 				      const struct regmap_config *config,
 				      struct lock_class_key *lock_key,
@@ -619,6 +623,10 @@ struct regmap *__devm_regmap_init_sdw(struct sdw_slave *sdw,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
 				 const char *lock_name);
+struct regmap *__devm_regmap_init_sdw_mbq(struct sdw_slave *sdw,
+					  const struct regmap_config *config,
+					  struct lock_class_key *lock_key,
+					  const char *lock_name);
 struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
@@ -818,6 +826,19 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
 				sdw, config)
 
 /**
+ * regmap_init_sdw_mbq() - Initialise register map
+ *
+ * @sdw: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_sdw_mbq(sdw, config)					\
+	__regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config,		\
+				sdw, config)
+
+/**
  * regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave
  * to AVMM Bus Bridge
  *
@@ -990,6 +1011,20 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
 				sdw, config)
 
 /**
+ * devm_regmap_init_sdw_mbq() - Initialise managed register map
+ *
+ * @sdw: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_sdw_mbq(sdw, config)			\
+	__regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, #config,   \
+				sdw, config)
+
+/**
  * devm_regmap_init_slimbus() - Initialise managed register map
  *
  * @slimbus: Device that will be interacted with
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 41cc1192f9aa..f0b01b728640 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -359,6 +359,7 @@ struct sdw_dpn_prop {
  * @sink_dpn_prop: Sink Data Port N properties
  * @scp_int1_mask: SCP_INT1_MASK desired settings
  * @quirks: bitmask identifying deltas from the MIPI specification
+ * @is_sdca: the Slave supports the SDCA specification
  */
 struct sdw_slave_prop {
 	u32 mipi_revision;
@@ -382,6 +383,7 @@ struct sdw_slave_prop {
 	struct sdw_dpn_prop *sink_dpn_prop;
 	u8 scp_int1_mask;
 	u32 quirks;
+	bool is_sdca;
 };
 
 #define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY	BIT(0)
@@ -479,10 +481,12 @@ struct sdw_slave_id {
 
 /**
  * struct sdw_slave_intr_status - Slave interrupt status
+ * @sdca_cascade: set if the Slave device reports an SDCA interrupt
  * @control_port: control port status
  * @port: data port status
  */
 struct sdw_slave_intr_status {
+	bool sdca_cascade;
 	u8 control_port;
 	u8 port[15];
 };
diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h
index f420e8059779..e14dff9a9c7f 100644
--- a/include/linux/soundwire/sdw_registers.h
+++ b/include/linux/soundwire/sdw_registers.h
@@ -298,4 +298,36 @@
 #define SDW_CASC_PORT_MASK_INTSTAT3		1
 #define SDW_CASC_PORT_REG_OFFSET_INTSTAT3	2
 
+/*
+ * v1.2 device - SDCA address mapping
+ *
+ * Spec definition
+ *	Bits		Contents
+ *	31		0 (required by addressing range)
+ *	30:26		0b10000 (Control Prefix)
+ *	25		0 (Reserved)
+ *	24:22		Function Number [2:0]
+ *	21		Entity[6]
+ *	20:19		Control Selector[5:4]
+ *	18		0 (Reserved)
+ *	17:15		Control Number[5:3]
+ *	14		Next
+ *	13		MBQ
+ *	12:7		Entity[5:0]
+ *	6:3		Control Selector[3:0]
+ *	2:0		Control Number[2:0]
+ */
+
+#define SDW_SDCA_CTL(fun, ent, ctl, ch)		(BIT(30) |			\
+						 (((fun) & 0x7) << 22) |	\
+						 (((ent) & 0x40) << 15) |	\
+						 (((ent) & 0x3f) << 7) |	\
+						 (((ctl) & 0x30) << 15) |	\
+						 (((ctl) & 0x0f) << 3) |	\
+						 (((ch) & 0x38) << 12) |	\
+						 ((ch) & 0x07))
+
+#define SDW_SDCA_MBQ_CTL(reg)			((reg) | BIT(13))
+#define SDW_SDCA_NEXT_CTL(reg)			((reg) | BIT(14))
+
 #endif /* __SDW_REGISTERS_H */