Merge tag 'asoc-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: More updates for v3.14

A few more updates for v3.14 since the last set, highlights include:

 - Lots of DMA updates from Lars-Peter
 - Improvements to the constraints handling code from Lars-Peter
 - A very helpful conversion of the TWL4030 driver to regmap from Peter
 - A new driver for the Freescale ESAI controller from Nicolin Chen
 - Conversion of some of the drivers to use params_width()

4 files changed, 59 insertions, 10 deletions

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index ed92b30a02fd..ba5f96db0754 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -364,6 +364,32 @@ struct dma_slave_config {
 	unsigned int slave_id;
 };
 
+/**
+ * enum dma_residue_granularity - Granularity of the reported transfer residue
+ * @DMA_RESIDUE_GRANULARITY_DESCRIPTOR: Residue reporting is not support. The
+ *  DMA channel is only able to tell whether a descriptor has been completed or
+ *  not, which means residue reporting is not supported by this channel. The
+ *  residue field of the dma_tx_state field will always be 0.
+ * @DMA_RESIDUE_GRANULARITY_SEGMENT: Residue is updated after each successfully
+ *  completed segment of the transfer (For cyclic transfers this is after each
+ *  period). This is typically implemented by having the hardware generate an
+ *  interrupt after each transferred segment and then the drivers updates the
+ *  outstanding residue by the size of the segment. Another possibility is if
+ *  the hardware supports scatter-gather and the segment descriptor has a field
+ *  which gets set after the segment has been completed. The driver then counts
+ *  the number of segments without the flag set to compute the residue.
+ * @DMA_RESIDUE_GRANULARITY_BURST: Residue is updated after each transferred
+ *  burst. This is typically only supported if the hardware has a progress
+ *  register of some sort (E.g. a register with the current read/write address
+ *  or a register with the amount of bursts/beats/bytes that have been
+ *  transferred or still need to be transferred).
+ */
+enum dma_residue_granularity {
+	DMA_RESIDUE_GRANULARITY_DESCRIPTOR = 0,
+	DMA_RESIDUE_GRANULARITY_SEGMENT = 1,
+	DMA_RESIDUE_GRANULARITY_BURST = 2,
+};
+
 /* struct dma_slave_caps - expose capabilities of a slave channel only
  *
  * @src_addr_widths: bit mask of src addr widths the channel supports
@@ -374,6 +400,7 @@ struct dma_slave_config {
  * 	should be checked by controller as well
  * @cmd_pause: true, if pause and thereby resume is supported
  * @cmd_terminate: true, if terminate cmd is supported
+ * @residue_granularity: granularity of the reported transfer residue
  */
 struct dma_slave_caps {
 	u32 src_addr_widths;
@@ -381,6 +408,7 @@ struct dma_slave_caps {
 	u32 directions;
 	bool cmd_pause;
 	bool cmd_terminate;
+	enum dma_residue_granularity residue_granularity;
 };
 
 static inline const char *dma_chan_name(struct dma_chan *chan)
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 673a3ce67f31..ade1c06d4ceb 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -175,6 +175,9 @@ static inline int twl_class_is_ ##class(void)	\
 TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
 TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
 
+/* Set the regcache bypass for the regmap associated with the nodule */
+int twl_set_regcache_bypass(u8 mod_no, bool enable);
+
 /*
  * Read and write several 8-bit registers at once.
  */
@@ -667,8 +670,6 @@ struct twl4030_codec_data {
 	unsigned int digimic_delay; /* in ms */
 	unsigned int ramp_delay_value;
 	unsigned int offset_cncl_path;
-	unsigned int check_defaults:1;
-	unsigned int reset_registers:1;
 	unsigned int hs_extmute:1;
 	int hs_extmute_gpio;
 };
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 22916c0f1ca4..19883aeb1ac8 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -226,6 +226,9 @@
 #define ARIZONA_PDM_SPK1_CTRL_2                  0x491
 #define ARIZONA_PDM_SPK2_CTRL_1                  0x492
 #define ARIZONA_PDM_SPK2_CTRL_2                  0x493
+#define ARIZONA_HP1_SHORT_CIRCUIT_CTRL           0x4A0
+#define ARIZONA_HP2_SHORT_CIRCUIT_CTRL           0x4A1
+#define ARIZONA_HP3_SHORT_CIRCUIT_CTRL           0x4A2
 #define ARIZONA_SPK_CTRL_2                       0x4B5
 #define ARIZONA_SPK_CTRL_3                       0x4B6
 #define ARIZONA_DAC_COMP_1                       0x4DC
@@ -3333,6 +3336,30 @@
 #define ARIZONA_SPK2_FMT_WIDTH                        1  /* SPK2_FMT */
 
 /*
+ * R1184 (0x4A0) - HP1 Short Circuit Ctrl
+ */
+#define ARIZONA_HP1_SC_ENA                       0x1000  /* HP1_SC_ENA */
+#define ARIZONA_HP1_SC_ENA_MASK                  0x1000  /* HP1_SC_ENA */
+#define ARIZONA_HP1_SC_ENA_SHIFT                     12  /* HP1_SC_ENA */
+#define ARIZONA_HP1_SC_ENA_WIDTH                      1  /* HP1_SC_ENA */
+
+/*
+ * R1185 (0x4A1) - HP2 Short Circuit Ctrl
+ */
+#define ARIZONA_HP2_SC_ENA                       0x1000  /* HP2_SC_ENA */
+#define ARIZONA_HP2_SC_ENA_MASK                  0x1000  /* HP2_SC_ENA */
+#define ARIZONA_HP2_SC_ENA_SHIFT                     12  /* HP2_SC_ENA */
+#define ARIZONA_HP2_SC_ENA_WIDTH                      1  /* HP2_SC_ENA */
+
+/*
+ * R1186 (0x4A2) - HP3 Short Circuit Ctrl
+ */
+#define ARIZONA_HP3_SC_ENA                       0x1000  /* HP3_SC_ENA */
+#define ARIZONA_HP3_SC_ENA_MASK                  0x1000  /* HP3_SC_ENA */
+#define ARIZONA_HP3_SC_ENA_SHIFT                     12  /* HP3_SC_ENA */
+#define ARIZONA_HP3_SC_ENA_WIDTH                      1  /* HP3_SC_ENA */
+
+/*
  * R1244 (0x4DC) - DAC comp 1
  */
 #define ARIZONA_OUT_COMP_COEFF_MASK              0xFFFF  /* OUT_COMP_COEFF - [15:0] */
diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h
index 9991aea3d577..2f34bb98fe2a 100644
--- a/include/linux/platform_data/asoc-ux500-msp.h
+++ b/include/linux/platform_data/asoc-ux500-msp.h
@@ -10,16 +10,9 @@
 
 #include <linux/platform_data/dma-ste-dma40.h>
 
-enum msp_i2s_id {
-	MSP_I2S_0 = 0,
-	MSP_I2S_1,
-	MSP_I2S_2,
-	MSP_I2S_3,
-};
-
 /* Platform data structure for a MSP I2S-device */
 struct msp_i2s_platform_data {
-	enum msp_i2s_id id;
+	int id;
 	struct stedma40_chan_cfg *msp_i2s_dma_rx;
 	struct stedma40_chan_cfg *msp_i2s_dma_tx;
 };