Merge branch 'master' into queue

* master: (15791 commits)
  Linux 3.9-rc1
  btrfs/raid56: Add missing #include <linux/vmalloc.h>
  fix compat_sys_rt_sigprocmask()
  SUNRPC: One line comment fix
  ext4: enable quotas before orphan cleanup
  ext4: don't allow quota mount options when quota feature enabled
  ext4: fix a warning from sparse check for ext4_dir_llseek
  ext4: convert number of blocks to clusters properly
  ext4: fix possible memory leak in ext4_remount()
  jbd2: fix ERR_PTR dereference in jbd2__journal_start
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  ...

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Conflicts:
	arch/x86/kernel/kvmclock.c

33 files changed, 713 insertions, 61 deletions

diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h
index 24368a2e8b87..798fb80b024b 100644
--- a/include/linux/platform_data/cpsw.h
+++ b/include/linux/platform_data/cpsw.h
@@ -21,6 +21,8 @@ struct cpsw_slave_data {
 	char		phy_id[MII_BUS_ID_SIZE];
 	int		phy_if;
 	u8		mac_addr[ETH_ALEN];
+	u16		dual_emac_res_vlan;	/* Reserved VLAN for DualEMAC */
+
 };
 
 struct cpsw_platform_data {
@@ -35,6 +37,8 @@ struct cpsw_platform_data {
 	u32	bd_ram_size;  /*buffer descriptor ram size */
 	u32	rx_descs;	/* Number of Rx Descriptios */
 	u32	mac_control;	/* Mac control register */
+	u16	default_vlan;	/* Def VLAN for ALE lookup in VLAN aware mode*/
+	bool	dual_emac;	/* Enable Dual EMAC mode */
 };
 
 #endif /* __CPSW_H__ */
diff --git a/include/linux/platform_data/dma-coh901318.h b/include/linux/platform_data/dma-coh901318.h
new file mode 100644
index 000000000000..c4cb9590d115
--- /dev/null
+++ b/include/linux/platform_data/dma-coh901318.h
@@ -0,0 +1,72 @@
+/*
+ * Platform data for the COH901318 DMA controller
+ * Copyright (C) 2007-2013 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef PLAT_COH901318_H
+#define PLAT_COH901318_H
+
+#ifdef CONFIG_COH901318
+
+/* We only support the U300 DMA channels */
+#define U300_DMA_MSL_TX_0		0
+#define U300_DMA_MSL_TX_1		1
+#define U300_DMA_MSL_TX_2		2
+#define U300_DMA_MSL_TX_3		3
+#define U300_DMA_MSL_TX_4		4
+#define U300_DMA_MSL_TX_5		5
+#define U300_DMA_MSL_TX_6		6
+#define U300_DMA_MSL_RX_0		7
+#define U300_DMA_MSL_RX_1		8
+#define U300_DMA_MSL_RX_2		9
+#define U300_DMA_MSL_RX_3		10
+#define U300_DMA_MSL_RX_4		11
+#define U300_DMA_MSL_RX_5		12
+#define U300_DMA_MSL_RX_6		13
+#define U300_DMA_MMCSD_RX_TX		14
+#define U300_DMA_MSPRO_TX		15
+#define U300_DMA_MSPRO_RX		16
+#define U300_DMA_UART0_TX		17
+#define U300_DMA_UART0_RX		18
+#define U300_DMA_APEX_TX		19
+#define U300_DMA_APEX_RX		20
+#define U300_DMA_PCM_I2S0_TX		21
+#define U300_DMA_PCM_I2S0_RX		22
+#define U300_DMA_PCM_I2S1_TX		23
+#define U300_DMA_PCM_I2S1_RX		24
+#define U300_DMA_XGAM_CDI		25
+#define U300_DMA_XGAM_PDI		26
+#define U300_DMA_SPI_TX			27
+#define U300_DMA_SPI_RX			28
+#define U300_DMA_GENERAL_PURPOSE_0	29
+#define U300_DMA_GENERAL_PURPOSE_1	30
+#define U300_DMA_GENERAL_PURPOSE_2	31
+#define U300_DMA_GENERAL_PURPOSE_3	32
+#define U300_DMA_GENERAL_PURPOSE_4	33
+#define U300_DMA_GENERAL_PURPOSE_5	34
+#define U300_DMA_GENERAL_PURPOSE_6	35
+#define U300_DMA_GENERAL_PURPOSE_7	36
+#define U300_DMA_GENERAL_PURPOSE_8	37
+#define U300_DMA_UART1_TX		38
+#define U300_DMA_UART1_RX		39
+
+#define U300_DMA_DEVICE_CHANNELS	32
+#define U300_DMA_CHANNELS		40
+
+/**
+ * coh901318_filter_id() - DMA channel filter function
+ * @chan: dma channel handle
+ * @chan_id: id of dma channel to be filter out
+ *
+ * In dma_request_channel() it specifies what channel id to be requested
+ */
+bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
+#else
+static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
+{
+	return false;
+}
+#endif
+
+#endif /* PLAT_COH901318_H */
diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h
index 2ba1f7d76eef..8ec18f64e396 100644
--- a/include/linux/platform_data/dma-mv_xor.h
+++ b/include/linux/platform_data/dma-mv_xor.h
@@ -10,15 +10,14 @@
 #include <linux/dmaengine.h>
 #include <linux/mbus.h>
 
-#define MV_XOR_SHARED_NAME	"mv_xor_shared"
-#define MV_XOR_NAME		"mv_xor"
+#define MV_XOR_NAME	"mv_xor"
 
-struct mv_xor_platform_data {
-	struct platform_device		*shared;
-	int				hw_id;
+struct mv_xor_channel_data {
 	dma_cap_mask_t			cap_mask;
-	size_t				pool_size;
 };
 
+struct mv_xor_platform_data {
+	struct mv_xor_channel_data    *channels;
+};
 
 #endif
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 9ff93b065686..4b781014b0a0 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -147,6 +147,16 @@ struct stedma40_chan_cfg {
  * @memcpy_conf_log: default configuration of logical channel memcpy
  * @disabled_channels: A vector, ending with -1, that marks physical channels
  * that are for different reasons not available for the driver.
+ * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
+ * which avoids HW bug that exists in some versions of the controller.
+ * SoftLLI introduces relink overhead that could impact performace for
+ * certain use cases.
+ * @num_of_soft_lli_chans: The number of channels that needs to be configured
+ * to use SoftLLI.
+ * @use_esram_lcla: flag for mapping the lcla into esram region
+ * @num_of_phy_chans: The number of physical channels implemented in HW.
+ * 0 means reading the number of channels from DMA HW but this is only valid
+ * for 'multiple of 4' channels, like 8.
  */
 struct stedma40_platform_data {
 	u32				 dev_len;
@@ -157,7 +167,10 @@ struct stedma40_platform_data {
 	struct stedma40_chan_cfg	*memcpy_conf_phy;
 	struct stedma40_chan_cfg	*memcpy_conf_log;
 	int				 disabled_channels[STEDMA40_MAX_PHYS];
+	int				*soft_lli_chans;
+	int				 num_of_soft_lli_chans;
 	bool				 use_esram_lcla;
+	int				 num_of_phy_chans;
 };
 
 #ifdef CONFIG_STE_DMA40
diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h
new file mode 100644
index 000000000000..1bd5244d1dcd
--- /dev/null
+++ b/include/linux/platform_data/elm.h
@@ -0,0 +1,54 @@
+/*
+ * BCH Error Location Module
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ELM_H
+#define __ELM_H
+
+enum bch_ecc {
+	BCH4_ECC = 0,
+	BCH8_ECC,
+};
+
+/* ELM support 8 error syndrome process */
+#define ERROR_VECTOR_MAX		8
+
+#define BCH8_ECC_OOB_BYTES		13
+#define BCH4_ECC_OOB_BYTES		7
+/* RBL requires 14 byte even though BCH8 uses only 13 byte */
+#define BCH8_SIZE			(BCH8_ECC_OOB_BYTES + 1)
+/* Uses 1 extra byte to handle erased pages */
+#define BCH4_SIZE			(BCH4_ECC_OOB_BYTES + 1)
+
+/**
+ * struct elm_errorvec - error vector for elm
+ * @error_reported:		set true for vectors error is reported
+ * @error_uncorrectable:	number of uncorrectable errors
+ * @error_count:		number of correctable errors in the sector
+ * @error_loc:			buffer for error location
+ *
+ */
+struct elm_errorvec {
+	bool error_reported;
+	bool error_uncorrectable;
+	int error_count;
+	int error_loc[ERROR_VECTOR_MAX];
+};
+
+void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
+		struct elm_errorvec *err_vec);
+void elm_config(struct device *dev, enum bch_ecc bch_type);
+#endif /* __ELM_H */
diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
index a7bdb2f63b73..da7e6274b175 100644
--- a/include/linux/platform_data/exynos_thermal.h
+++ b/include/linux/platform_data/exynos_thermal.h
@@ -53,6 +53,8 @@ struct freq_clip_table {
  * struct exynos_tmu_platform_data
  * @threshold: basic temperature for generating interrupt
  *	       25 <= threshold <= 125 [unit: degree Celsius]
+ * @threshold_falling: differntial value for setting threshold
+ *		       of temperature falling interrupt.
  * @trigger_levels: array for each interrupt levels
  *	[unit: degree Celsius]
  *	0: temperature for trigger_level0 interrupt
@@ -97,6 +99,7 @@ struct freq_clip_table {
  */
 struct exynos_tmu_platform_data {
 	u8 threshold;
+	u8 threshold_falling;
 	u8 trigger_levels[4];
 	bool trigger_level0_en;
 	bool trigger_level1_en;
diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h
new file mode 100644
index 000000000000..6faa992a9502
--- /dev/null
+++ b/include/linux/platform_data/i2c-cbus-gpio.h
@@ -0,0 +1,27 @@
+/*
+ * i2c-cbus-gpio.h - CBUS I2C platform_data definition
+ *
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Written by Felipe Balbi and Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H
+#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H
+
+struct i2c_cbus_platform_data {
+	int dat_gpio;
+	int clk_gpio;
+	int sel_gpio;
+};
+
+#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */
diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h
index 51d52e767a19..2a50048c1c44 100644
--- a/include/linux/platform_data/i2c-s3c2410.h
+++ b/include/linux/platform_data/i2c-s3c2410.h
@@ -15,6 +15,8 @@
 
 #define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
 
+struct platform_device;
+
 /**
  *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
  *	@bus_num: The bus number to use (if possible).
diff --git a/include/linux/platform_data/imx-iram.h b/include/linux/platform_data/imx-iram.h
new file mode 100644
index 000000000000..022690c33702
--- /dev/null
+++ b/include/linux/platform_data/imx-iram.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+
+#ifdef CONFIG_IRAM_ALLOC
+
+int __init iram_init(unsigned long base, unsigned long size);
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
+void iram_free(unsigned long dma_addr, unsigned int size);
+
+#else
+
+static inline int __init iram_init(unsigned long base, unsigned long size)
+{
+	return -ENOMEM;
+}
+
+static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+	return NULL;
+}
+
+static inline void iram_free(unsigned long base, unsigned long size) {}
+
+#endif
diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h
new file mode 100644
index 000000000000..ad3aa7b95f35
--- /dev/null
+++ b/include/linux/platform_data/invensense_mpu6050.h
@@ -0,0 +1,31 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*/
+
+#ifndef __INV_MPU6050_PLATFORM_H_
+#define __INV_MPU6050_PLATFORM_H_
+
+/**
+ * struct inv_mpu6050_platform_data - Platform data for the mpu driver
+ * @orientation:	Orientation matrix of the chip
+ *
+ * Contains platform specific information on how to configure the MPU6050 to
+ * work on this platform.  The orientation matricies are 3x3 rotation matricies
+ * that are applied to the data to rotate from the mounting orientation to the
+ * platform orientation.  The values must be one of 0, 1, or -1 and each row and
+ * column should have exactly 1 non-zero value.
+ */
+struct inv_mpu6050_platform_data {
+	__s8 orientation[9];
+};
+
+#endif
diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h
index c677b9f2fefa..5b429c43a297 100644
--- a/include/linux/platform_data/iommu-omap.h
+++ b/include/linux/platform_data/iommu-omap.h
@@ -10,6 +10,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
 #define MMU_REG_SIZE		256
 
 /**
@@ -42,8 +44,11 @@ struct omap_mmu_dev_attr {
 
 struct iommu_platform_data {
 	const char *name;
-	const char *clk_name;
-	const int nr_tlb_entries;
+	const char *reset_name;
+	int nr_tlb_entries;
 	u32 da_start;
 	u32 da_end;
+
+	int (*assert_reset)(struct platform_device *pdev, const char *name);
+	int (*deassert_reset)(struct platform_device *pdev, const char *name);
 };
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
new file mode 100644
index 000000000000..1509570d5a3f
--- /dev/null
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -0,0 +1,87 @@
+/*
+ * LP55XX Platform Data Header
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * Derived from leds-lp5521.h, leds-lp5523.h
+ */
+
+#ifndef _LEDS_LP55XX_H
+#define _LEDS_LP55XX_H
+
+/* Clock configuration */
+#define LP55XX_CLOCK_AUTO	0
+#define LP55XX_CLOCK_INT	1
+#define LP55XX_CLOCK_EXT	2
+
+/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT			1	/* Internal clock */
+#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
+
+struct lp55xx_led_config {
+	const char *name;
+	u8 chan_nr;
+	u8 led_current; /* mA x10, 0 if led is not connected */
+	u8 max_current;
+};
+
+struct lp55xx_predef_pattern {
+	u8 *r;
+	u8 *g;
+	u8 *b;
+	u8 size_r;
+	u8 size_g;
+	u8 size_b;
+};
+
+/*
+ * struct lp55xx_platform_data
+ * @led_config        : Configurable led class device
+ * @num_channels      : Number of LED channels
+ * @label             : Used for naming LEDs
+ * @clock_mode        : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT
+ * @setup_resources   : Platform specific function before enabling the chip
+ * @release_resources : Platform specific function after  disabling the chip
+ * @enable            : EN pin control by platform side
+ * @patterns          : Predefined pattern data for RGB channels
+ * @num_patterns      : Number of patterns
+ * @update_config     : Value of CONFIG register
+ */
+struct lp55xx_platform_data {
+
+	/* LED channel configuration */
+	struct lp55xx_led_config *led_config;
+	u8 num_channels;
+	const char *label;
+
+	/* Clock configuration */
+	u8 clock_mode;
+
+	/* Platform specific functions */
+	int (*setup_resources)(void);
+	void (*release_resources)(void);
+	void (*enable)(bool state);
+
+	/* Predefined pattern data */
+	struct lp55xx_predef_pattern *patterns;
+	unsigned int num_patterns;
+
+	/* _CONFIG register */
+	u8 update_config;
+};
+
+#endif /* _LEDS_LP55XX_H */
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 761f31752367..20ee8b221dbd 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -49,12 +49,24 @@
 #define LP8556_FAST_CONFIG	BIT(7) /* use it if EPROMs should be maintained
 					  when exiting the low power mode */
 
+/* CONFIG register - LP8557 */
+#define LP8557_PWM_STANDBY	BIT(7)
+#define LP8557_PWM_FILTER	BIT(6)
+#define LP8557_RELOAD_EPROM	BIT(3)	/* use it if EPROMs should be reset
+					   when the backlight turns on */
+#define LP8557_OFF_OPENLEDS	BIT(2)
+#define LP8557_PWM_CONFIG	LP8557_PWM_ONLY
+#define LP8557_I2C_CONFIG	LP8557_I2C_ONLY
+#define LP8557_COMB1_CONFIG	LP8557_COMBINED1
+#define LP8557_COMB2_CONFIG	LP8557_COMBINED2
+
 enum lp855x_chip_id {
 	LP8550,
 	LP8551,
 	LP8552,
 	LP8553,
 	LP8556,
+	LP8557,
 };
 
 enum lp855x_brightness_ctrl_mode {
@@ -89,9 +101,11 @@ enum lp8556_brightness_source {
 	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
 };
 
-struct lp855x_pwm_data {
-	void (*pwm_set_intensity) (int brightness, int max_brightness);
-	int (*pwm_get_intensity) (int max_brightness);
+enum lp8557_brightness_source {
+	LP8557_PWM_ONLY,
+	LP8557_I2C_ONLY,
+	LP8557_COMBINED1,	/* pwm + i2c after the shaper block */
+	LP8557_COMBINED2,	/* pwm + i2c before the shaper block */
 };
 
 struct lp855x_rom_data {
@@ -105,7 +119,7 @@ struct lp855x_rom_data {
  * @mode : brightness control by pwm or lp855x register
  * @device_control : value of DEVICE CONTROL register
  * @initial_brightness : initial value of backlight brightness
- * @pwm_data : platform specific pwm generation functions.
+ * @period_ns : platform specific pwm period value. unit is nano.
 		Only valid when mode is PWM_BASED.
  * @load_new_rom_data :
 	0 : use default configuration data
@@ -118,7 +132,7 @@ struct lp855x_platform_data {
 	enum lp855x_brightness_ctrl_mode mode;
 	u8 device_control;
 	int initial_brightness;
-	struct lp855x_pwm_data pwm_data;
+	unsigned int period_ns;
 	u8 load_new_rom_data;
 	int size_program;
 	struct lp855x_rom_data *rom_data;
diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h
new file mode 100644
index 000000000000..a7fd0776c9bf
--- /dev/null
+++ b/include/linux/platform_data/lp8755.h
@@ -0,0 +1,71 @@
+/*
+ * LP8755 High Performance Power Management Unit Driver:System Interface Driver
+ *
+ *			Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
+ *             G.Shark Jeong <gshark.jeong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP8755_H
+#define _LP8755_H
+
+#include <linux/regulator/consumer.h>
+
+#define LP8755_NAME "lp8755-regulator"
+/*
+ *PWR FAULT : power fault detected
+ *OCP : over current protect activated
+ *OVP : over voltage protect activated
+ *TEMP_WARN : thermal warning
+ *TEMP_SHDN : thermal shutdonw detected
+ *I_LOAD : current measured
+ */
+#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL
+#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT
+#define LP8755_EVENT_OVP 0x10000
+#define LP8755_EVENT_TEMP_WARN 0x2000
+#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP
+#define LP8755_EVENT_I_LOAD	0x40000
+
+enum lp8755_bucks {
+	LP8755_BUCK0 = 0,
+	LP8755_BUCK1,
+	LP8755_BUCK2,
+	LP8755_BUCK3,
+	LP8755_BUCK4,
+	LP8755_BUCK5,
+	LP8755_BUCK_MAX,
+};
+
+/**
+ * multiphase configuration options
+ */
+enum lp8755_mphase_config {
+	MPHASE_CONF0,
+	MPHASE_CONF1,
+	MPHASE_CONF2,
+	MPHASE_CONF3,
+	MPHASE_CONF4,
+	MPHASE_CONF5,
+	MPHASE_CONF6,
+	MPHASE_CONF7,
+	MPHASE_CONF8,
+	MPHASE_CONF_MAX
+};
+
+/**
+ * struct lp8755_platform_data
+ * @mphase_type : Multiphase Switcher Configurations.
+ * @buck_data   : buck0~6 init voltage in uV
+ */
+struct lp8755_platform_data {
+	int mphase;
+	struct regulator_init_data *buck_data[LP8755_BUCK_MAX];
+};
+#endif
diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h
new file mode 100644
index 000000000000..ed9d3b3daf02
--- /dev/null
+++ b/include/linux/platform_data/max6697.h
@@ -0,0 +1,36 @@
+/*
+ * max6697.h
+ *     Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MAX6697_H
+#define MAX6697_H
+
+#include <linux/types.h>
+
+/*
+ * For all bit masks:
+ * bit 0:    local temperature
+ * bit 1..7: remote temperatures
+ */
+struct max6697_platform_data {
+	bool smbus_timeout_disable;	/* set to disable SMBus timeouts */
+	bool extended_range_enable;	/* set to enable extended temp range */
+	bool beta_compensation;		/* set to enable beta compensation */
+	u8 alert_mask;			/* set bit to 1 to disable alert */
+	u8 over_temperature_mask;	/* set bit to 1 to disable */
+	u8 resistance_cancellation;	/* set bit to 0 to disable
+					 * bit mask for MAX6581,
+					 * boolean for other chips
+					 */
+	u8 ideality_mask;		/* set bit to 0 to disable */
+	u8 ideality_value;		/* transistor ideality as per
+					 * MAX6581 datasheet
+					 */
+};
+
+#endif /* MAX6697_H */
diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h
new file mode 100644
index 000000000000..cfda59b226ee
--- /dev/null
+++ b/include/linux/platform_data/microread.h
@@ -0,0 +1,35 @@
+/*
+ * Driver include for the PN544 NFC chip.
+ *
+ * Copyright (C) 2011 Tieto Poland
+ * Copyright (C) 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _MICROREAD_H
+#define _MICROREAD_H
+
+#include <linux/i2c.h>
+
+#define MICROREAD_DRIVER_NAME	"microread"
+
+/* board config platform data for microread */
+struct microread_nfc_platform_data {
+	unsigned int rst_gpio;
+	unsigned int irq_gpio;
+	unsigned int ioh_gpio;
+};
+
+#endif /* _MICROREAD_H */
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index aaf97481f413..b4a0521ce411 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -39,5 +39,6 @@ struct esdhc_platform_data {
 	unsigned int cd_gpio;
 	enum wp_types wp_type;
 	enum cd_types cd_type;
+	int max_bus_width;
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/include/linux/platform_data/mmc-sdhci-tegra.h b/include/linux/platform_data/mmc-sdhci-tegra.h
deleted file mode 100644
index 8f8430697686..000000000000
--- a/include/linux/platform_data/mmc-sdhci-tegra.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2009 Palm, Inc.
- * Author: Yvonne Yip <y@palm.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H
-#define __PLATFORM_DATA_TEGRA_SDHCI_H
-
-#include <linux/mmc/host.h>
-
-struct tegra_sdhci_platform_data {
-	int cd_gpio;
-	int wp_gpio;
-	int power_gpio;
-	int is_8bit;
-	int pm_flags;
-};
-
-#endif
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 24d32ca34bef..6bf9ef43ddb1 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -60,6 +60,8 @@ struct omap_nand_platform_data {
 	int			devsize;
 	enum omap_ecc           ecc_opt;
 	struct gpmc_nand_regs	reg;
-};
 
+	/* for passing the partitions */
+	struct device_node	*of_node;
+};
 #endif
diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h
deleted file mode 100644
index c3c8254c22a5..000000000000
--- a/include/linux/platform_data/mtd-nomadik-nand.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
-	struct mtd_partition *parts;
-	int nparts;
-	int options;
-	int (*init) (void);
-	int (*exit) (void);
-};
-
-#define NAND_IO_DATA	0x40000000
-#define NAND_IO_CMD	0x40800000
-#define NAND_IO_ADDR	0x41000000
-
-#endif				/* __ASM_ARCH_NAND_H */
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
index 685af7e8b120..e9a9fb188f97 100644
--- a/include/linux/platform_data/mtd-onenand-omap2.h
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -29,5 +29,8 @@ struct omap_onenand_platform_data {
 	u8			flags;
 	u8			regulator_can_sleep;
 	u8			skip_initial_unlocking;
+
+	/* for passing the partitions */
+	struct device_node	*of_node;
 };
 #endif
diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h
index 8b79e0967f9c..3f1cbf95ec3b 100644
--- a/include/linux/platform_data/s3c-hsotg.h
+++ b/include/linux/platform_data/s3c-hsotg.h
@@ -15,6 +15,8 @@
 #ifndef __LINUX_USB_S3C_HSOTG_H
 #define __LINUX_USB_S3C_HSOTG_H
 
+struct platform_device;
+
 enum s3c_hsotg_dmamode {
 	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
 	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
new file mode 100644
index 000000000000..1bd24cba982b
--- /dev/null
+++ b/include/linux/platform_data/samsung-usbphy.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *		http://www.samsung.com/
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Defines platform data for samsung usb phy driver.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_PLATFORM_H
+#define __SAMSUNG_USBPHY_PLATFORM_H
+
+/**
+ * samsung_usbphy_data - Platform data for USB PHY driver.
+ * @pmu_isolation: Function to control usb phy isolation in PMU.
+ */
+struct samsung_usbphy_data {
+	void (*pmu_isolation)(int on);
+};
+
+extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
+
+#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
new file mode 100644
index 000000000000..ff9b0aab5281
--- /dev/null
+++ b/include/linux/platform_data/serial-omap.h
@@ -0,0 +1,51 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ *	Govindraj R	<govindraj.raja@ti.com>
+ *	Thara Gopinath	<thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/pm_qos.h>
+
+#define DRIVER_NAME	"omap_uart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME	"ttyO"
+
+struct omap_uart_port_info {
+	bool			dma_enabled;	/* To specify DMA Mode */
+	unsigned int		uartclk;	/* UART clock rate */
+	upf_t			flags;		/* UPF_* flags */
+	unsigned int		dma_rx_buf_size;
+	unsigned int		dma_rx_timeout;
+	unsigned int		autosuspend_timeout;
+	unsigned int		dma_rx_poll_rate;
+	int			DTR_gpio;
+	int			DTR_inverted;
+	int			DTR_present;
+
+	int (*get_context_loss_count)(struct device *);
+	void (*set_forceidle)(struct device *);
+	void (*set_noidle)(struct device *);
+	void (*enable_wakeup)(struct device *, bool);
+};
+
+#endif /* __OMAP_SERIAL_H__ */
diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/serial-sccnxp.h
index 7311ccd3217f..215574d1e81d 100644
--- a/include/linux/platform_data/sccnxp.h
+++ b/include/linux/platform_data/serial-sccnxp.h
@@ -11,8 +11,8 @@
  *  (at your option) any later version.
  */
 
-#ifndef __SCCNXP_H
-#define __SCCNXP_H
+#ifndef _PLATFORM_DATA_SERIAL_SCCNXP_H_
+#define _PLATFORM_DATA_SERIAL_SCCNXP_H_
 
 #define SCCNXP_MAX_UARTS	2
 
@@ -84,6 +84,8 @@ struct sccnxp_pdata {
 	const u8		reg_shift;
 	/* Modem control lines configuration */
 	const u32		mctrl_cfg[SCCNXP_MAX_UARTS];
+	/* Timer value for polling mode (usecs) */
+	const unsigned int	poll_time_us;
 	/* Called during startup */
 	void (*init)(void);
 	/* Called before finish */
diff --git a/include/linux/platform_data/sh_ipmmu.h b/include/linux/platform_data/sh_ipmmu.h
new file mode 100644
index 000000000000..39f7405cdac5
--- /dev/null
+++ b/include/linux/platform_data/sh_ipmmu.h
@@ -0,0 +1,18 @@
+/* sh_ipmmu.h
+ *
+ * Copyright (C) 2012  Hideki EIRAKU
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __SH_IPMMU_H__
+#define __SH_IPMMU_H__
+
+struct shmobile_ipmmu_platform_data {
+	const char * const *dev_names;
+	unsigned int num_dev_names;
+};
+
+#endif /* __SH_IPMMU_H__ */
diff --git a/include/linux/platform_data/spi-clps711x.h b/include/linux/platform_data/spi-clps711x.h
new file mode 100644
index 000000000000..301956e63143
--- /dev/null
+++ b/include/linux/platform_data/spi-clps711x.h
@@ -0,0 +1,21 @@
+/*
+ *  CLPS711X SPI bus driver definitions
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H
+#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H
+
+/* Board specific platform_data */
+struct spi_clps711x_pdata {
+	int *chipselect;	/* Array of GPIO-numbers */
+	int num_chipselect;	/* Total count of GPIOs */
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index a357eb26bd25..c100456eab17 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -7,9 +7,13 @@
 
 #define OMAP4_MCSPI_REG_OFFSET 0x100
 
+#define MCSPI_PINDIR_D0_IN_D1_OUT	0
+#define MCSPI_PINDIR_D0_OUT_D1_IN	1
+
 struct omap2_mcspi_platform_config {
 	unsigned short	num_cs;
 	unsigned int regs_offset;
+	unsigned int pin_dir:1;
 };
 
 struct omap2_mcspi_dev_attr {
@@ -18,6 +22,9 @@ struct omap2_mcspi_dev_attr {
 
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
+
+	/* toggle chip select after every word */
+	unsigned cs_per_word:1;
 };
 
 #endif
diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h
new file mode 100644
index 000000000000..e41d5834cb84
--- /dev/null
+++ b/include/linux/platform_data/ti_am335x_adc.h
@@ -0,0 +1,14 @@
+#ifndef __LINUX_TI_AM335X_ADC_H
+#define __LINUX_TI_AM335X_ADC_H
+
+/**
+ * struct adc_data	ADC Input information
+ * @adc_channels:	Number of analog inputs
+ *			available for ADC.
+ */
+
+struct adc_data {
+	unsigned int adc_channels;
+};
+
+#endif
diff --git a/include/linux/platform_data/tsl2563.h b/include/linux/platform_data/tsl2563.h
new file mode 100644
index 000000000000..c90d7a09dda7
--- /dev/null
+++ b/include/linux/platform_data/tsl2563.h
@@ -0,0 +1,8 @@
+#ifndef __LINUX_TSL2563_H
+#define __LINUX_TSL2563_H
+
+struct tsl2563_platform_data {
+	int cover_comp_gain;
+};
+
+#endif /* __LINUX_TSL2563_H */
diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h
index 8570bcfe6311..fa579b4c666b 100644
--- a/include/linux/platform_data/usb-omap.h
+++ b/include/linux/platform_data/usb-omap.h
@@ -55,10 +55,18 @@ struct ohci_hcd_omap_platform_data {
 };
 
 struct usbhs_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+	int				nports;
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 
 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
+
+	/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
+	unsigned single_ulpi_bypass:1;
+	unsigned es2_compatibility:1;
+	unsigned phy_reset:1;
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h
new file mode 100644
index 000000000000..85dcc709f7e9
--- /dev/null
+++ b/include/linux/platform_data/usb3503.h
@@ -0,0 +1,19 @@
+#ifndef __USB3503_H__
+#define __USB3503_H__
+
+#define USB3503_I2C_NAME	"usb3503"
+
+enum usb3503_mode {
+	USB3503_MODE_UNKNOWN,
+	USB3503_MODE_HUB,
+	USB3503_MODE_STANDBY,
+};
+
+struct usb3503_platform_data {
+	enum usb3503_mode	initial_mode;
+	int	gpio_intn;
+	int	gpio_connect;
+	int	gpio_reset;
+};
+
+#endif
diff --git a/include/linux/platform_data/ux500_wdt.h b/include/linux/platform_data/ux500_wdt.h
new file mode 100644
index 000000000000..1689ff4c3bfd
--- /dev/null
+++ b/include/linux/platform_data/ux500_wdt.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) ST Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * STE Ux500 Watchdog platform data
+ */
+#ifndef __UX500_WDT_H
+#define __UX500_WDT_H
+
+/**
+ * struct ux500_wdt_data
+ */
+struct ux500_wdt_data {
+	unsigned int timeout;
+	bool has_28_bits_resolution;
+};
+
+#endif /* __UX500_WDT_H */