Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts: fs/cifs/export.c
author: Steve French <sfrench@us.ibm.com> 2007-07-19 04:38:57 +0400
committer: Steve French <sfrench@us.ibm.com> 2007-07-19 04:38:57 +0400
commit: 1ff8392c32a2645d2665ca779ecb91bb29361c13 (patch)
tree: 860b95e9a499ade4060848740fc6ce1fbb4e4e8d /include/asm-mips
parent: 70b315b0dd3879cb3ab8aadffb14f10b2d19b9c3 (diff)
parent: 5bae7ac9feba925fd0099057f6b23d7be80b7b41 (diff)
download: linux-1ff8392c32a2645d2665ca779ecb91bb29361c13.tar.xz
75 files changed, 2428 insertions, 1534 deletions
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index c6275088cf65..0b3ff9c48409 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -129,28 +129,12 @@
 #define PHYS_TO_XKPHYS(cm,a)		(_CONST64_(0x8000000000000000) | \
 					 ((cm)<<59) | (a))
 
-#if defined (CONFIG_CPU_R4300)						\
-    || defined (CONFIG_CPU_R4X00)					\
-    || defined (CONFIG_CPU_R5000)					\
-    || defined (CONFIG_CPU_RM7000)					\
-    || defined (CONFIG_CPU_NEVADA)					\
-    || defined (CONFIG_CPU_TX49XX)					\
-    || defined (CONFIG_CPU_MIPS64)
-#define TO_PHYS_MASK	_CONST64_(0x0000000fffffffff)	/* 2^^36 - 1 */
-#endif
-
-#if defined (CONFIG_CPU_R8000)
-/* We keep KUSIZE consistent with R4000 for now (2^^40) instead of (2^^48) */
-#define TO_PHYS_MASK	_CONST64_(0x000000ffffffffff)	/* 2^^40 - 1 */
-#endif
-
-#if defined (CONFIG_CPU_R10000)
-#define TO_PHYS_MASK	_CONST64_(0x000000ffffffffff)	/* 2^^40 - 1 */
-#endif
-
-#if defined(CONFIG_CPU_SB1) || defined(CONFIG_CPU_SB1A)
-#define TO_PHYS_MASK	_CONST64_(0x00000fffffffffff)	/* 2^^44 - 1 */
-#endif
+/*
+ * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
+ * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
+ * R8000 implements most with its 48-bit physical address space.
+ */
+#define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */
 
 #ifndef CONFIG_CPU_R8000
 
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index ffe245b4258f..d9e81af53f78 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -310,7 +310,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-		unsigned long temp, res;
+		unsigned long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index b0c329783ac5..087126a5faf9 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -109,18 +109,12 @@
 #define  MACH_COSINE_ORION	0
 
 /*
- * Valid machtype for group GALILEO
- */
-#define MACH_GROUP_GALILEO     11	/* Galileo Eval Boards		*/
-#define  MACH_EV64120A		0	/* EV64120A */
-
-/*
  * Valid machtype for group MOMENCO
  */
 #define MACH_GROUP_MOMENCO	12	/* Momentum Boards		*/
 #define  MACH_MOMENCO_OCELOT	0
 #define  MACH_MOMENCO_OCELOT_G	1	/* no more supported (may 2007) */
-#define  MACH_MOMENCO_OCELOT_C	2
+#define  MACH_MOMENCO_OCELOT_C	2	/* no more supported (jun 2007) */
 #define  MACH_MOMENCO_JAGUAR_ATX 3	/* no more supported (may 2007) */
 #define  MACH_MOMENCO_OCELOT_3	4
 
@@ -194,13 +188,6 @@
 #define  MACH_HP_LASERJET	1
 
 /*
- * Valid machtype for group LASAT
- */
-#define MACH_GROUP_LASAT       21
-#define  MACH_LASAT_100		0	/* Masquerade II/SP100/SP50/SP25 */
-#define  MACH_LASAT_200		1	/* Masquerade PRO/SP200 */
-
-/*
  * Valid machtype for group TITAN
  */
 #define MACH_GROUP_TITAN       22	/* PMC-Sierra Titan		*/
@@ -213,6 +200,27 @@
 #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
 #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
 
+/*
+ * Valid machtype for group LEMOTE
+ */
+#define MACH_GROUP_LEMOTE          27
+#define  MACH_LEMOTE_FULONG        0
+
+/*
+ * Valid machtype for group PMC-MSP
+ */
+#define MACH_GROUP_MSP         26	/* PMC-Sierra MSP boards/CPUs    */
+#define MACH_MSP4200_EVAL       0	/* PMC-Sierra MSP4200 Evaluation */
+#define MACH_MSP4200_GW         1	/* PMC-Sierra MSP4200 Gateway demo */
+#define MACH_MSP4200_FPGA       2	/* PMC-Sierra MSP4200 Emulation */
+#define MACH_MSP7120_EVAL       3	/* PMC-Sierra MSP7120 Evaluation */
+#define MACH_MSP7120_GW         4	/* PMC-Sierra MSP7120 Residential GW */
+#define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
+#define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
+
+#define MACH_GROUP_WINDRIVER   28	/* Windriver boards */
+#define MACH_WRPPMC             1
+
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 const char *get_system_type(void);
diff --git a/include/asm-mips/cacheops.h b/include/asm-mips/cacheops.h
index c4a1ec31ff6a..df7f2deb3b56 100644
--- a/include/asm-mips/cacheops.h
+++ b/include/asm-mips/cacheops.h
@@ -20,7 +20,11 @@
 #define Index_Load_Tag_D	0x05
 #define Index_Store_Tag_I	0x08
 #define Index_Store_Tag_D	0x09
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I    	0x00
+#else
 #define Hit_Invalidate_I	0x10
+#endif
 #define Hit_Invalidate_D	0x11
 #define Hit_Writeback_Inv_D	0x15
 
diff --git a/include/asm-mips/compat-signal.h b/include/asm-mips/compat-signal.h
index 6599a901b63e..368a99e5c3e1 100644
--- a/include/asm-mips/compat-signal.h
+++ b/include/asm-mips/compat-signal.h
@@ -10,6 +10,68 @@
 
 #include <asm/uaccess.h>
 
+#define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			compat_uid_t _uid;	/* sender's uid */
+		} _kill;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_uid_t _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_clock_t _utime;
+			int _status;		/* exit code */
+			compat_clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			s32 _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			compat_uid_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+	} _sifields;
+} compat_siginfo_t;
+
 static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d,
 	const sigset_t *s)
 {
diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h
index 432653d7ae09..568c76cdd900 100644
--- a/include/asm-mips/compat.h
+++ b/include/asm-mips/compat.h
@@ -37,8 +37,10 @@ typedef s32		compat_key_t;
 
 typedef s32		compat_int_t;
 typedef s32		compat_long_t;
+typedef s64		compat_s64;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
@@ -132,7 +134,8 @@ typedef u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
-	return (void __user *)(long)uptr;
+	/* cast to a __user pointer via "unsigned long" makes sparse happy */
+	return (void __user *)(unsigned long)(long)uptr;
 }
 
 static inline compat_uptr_t ptr_to_compat(void __user *uptr)
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 5e4bed123b48..d95a83e3e1d7 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -150,6 +150,10 @@
 #define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
 #endif
 
+#ifndef cpu_has_userlocal
+#define cpu_has_userlocal	(cpu_data[0].options & MIPS_CPU_ULRI)
+#endif
+
 #ifdef CONFIG_32BIT
 # ifndef cpu_has_nofpuex
 # define cpu_has_nofpuex	(cpu_data[0].options & MIPS_CPU_NOFPUEX)
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index d38fdbf845b2..3857358fb6de 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -89,6 +89,8 @@
 #define PRID_IMP_34K		0x9500
 #define PRID_IMP_24KE		0x9600
 #define PRID_IMP_74K		0x9700
+#define PRID_IMP_LOONGSON1      0x4200
+#define PRID_IMP_LOONGSON2      0x6300
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -107,6 +109,7 @@
  * Definitions for 7:0 on legacy processors
  */
 
+#define PRID_REV_MASK		0x00ff
 
 #define PRID_REV_TX4927		0x0022
 #define PRID_REV_TX4937		0x0030
@@ -123,6 +126,18 @@
 #define PRID_REV_VR4122		0x0070
 #define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
 #define PRID_REV_VR4130		0x0080
+#define PRID_REV_34K_V1_0_2	0x0022
+
+/*
+ * Older processors used to encode processor version and revision in two
+ * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores
+ * have switched to use the 8-bits as 3:3:2 bitfield with the last field as
+ * the patch number.  *ARGH*
+ */
+#define PRID_REV_ENCODE_44(ver, rev)					\
+	((ver) << 4 | (rev))
+#define PRID_REV_ENCODE_332(ver, rev, patch)				\
+	((ver) << 5 | (rev) << 2 | (patch))
 
 /*
  * FPU implementation/revision register (CP1 control register 0).
@@ -200,7 +215,10 @@
 #define CPU_SB1A		62
 #define CPU_74K			63
 #define CPU_R14000		64
-#define CPU_LAST		64
+#define CPU_LOONGSON1           65
+#define CPU_LOONGSON2           66
+
+#define CPU_LAST		66
 
 /*
  * ISA Level encodings
@@ -246,6 +264,7 @@
 #define MIPS_CPU_PREFETCH	0x00080000 /* CPU has usable prefetch */
 #define MIPS_CPU_VINT		0x00100000 /* CPU supports MIPSR2 vectored interrupts */
 #define MIPS_CPU_VEIC		0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */
+#define MIPS_CPU_ULRI		0x00400000 /* CPU has ULRI feature */
 
 /*
  * CPU ASE encodings
diff --git a/include/asm-mips/dec/serial.h b/include/asm-mips/dec/serial.h
deleted file mode 100644
index acad75890a05..000000000000
--- a/include/asm-mips/dec/serial.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *	include/asm-mips/dec/serial.h
- *
- *	Definitions common to all DECstation serial devices.
- *
- *	Copyright (C) 2004  Maciej W. Rozycki
- *
- *	Based on bits extracted from drivers/tc/zs.h for which
- *	the following copyrights apply:
- *
- *	Copyright (C) 1995  David S. Miller (davem@caip.rutgers.edu)
- *	Copyright (C) 1996  Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- *	Copyright (C)       Harald Koerfgen
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_MIPS_DEC_SERIAL_H
-#define __ASM_MIPS_DEC_SERIAL_H
-
-struct dec_serial_hook {
-	int (*init_channel)(void *handle);
-	void (*init_info)(void *handle);
-	void (*rx_char)(unsigned char ch, unsigned char fl);
-	int (*poll_rx_char)(void *handle);
-	int (*poll_tx_char)(void *handle, unsigned char ch);
-	unsigned int cflags;
-};
-
-extern int register_dec_serial_hook(unsigned int channel,
-				    struct dec_serial_hook *hook);
-extern int unregister_dec_serial_hook(unsigned int channel);
-
-#endif /* __ASM_MIPS_DEC_SERIAL_H */
diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h
index 66189f5f6399..716371bd0980 100644
--- a/include/asm-mips/div64.h
+++ b/include/asm-mips/div64.h
@@ -20,7 +20,7 @@
  */
 
 #define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot, __mod; \
+	unsigned long __quot32, __mod32; \
 	unsigned long __cf, __tmp, __tmp2, __i; \
 	\
 	__asm__(".set	push\n\t" \
@@ -48,12 +48,13 @@
 		"bnez	%4, 0b\n\t" \
 		" srl	%5, %1, 0x1f\n\t" \
 		".set	pop" \
-		: "=&r" (__mod), "=&r" (__tmp), "=&r" (__quot), "=&r" (__cf), \
+		: "=&r" (__mod32), "=&r" (__tmp), \
+		  "=&r" (__quot32), "=&r" (__cf), \
 		  "=&r" (__i), "=&r" (__tmp2) \
 		: "Jr" (base), "0" (high), "1" (low)); \
 	\
-	(res) = __quot; \
-	__mod; })
+	(res) = __quot32; \
+	__mod32; })
 
 #define do_div(n, base) ({ \
 	unsigned long long __quot; \
diff --git a/include/asm-mips/fb.h b/include/asm-mips/fb.h
new file mode 100644
index 000000000000..bd3f68c9ddfc
--- /dev/null
+++ b/include/asm-mips/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/include/asm-mips/gpio.h b/include/asm-mips/gpio.h
new file mode 100644
index 000000000000..06e46faf862d
--- /dev/null
+++ b/include/asm-mips/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MIPS_GPIO_H
+#define __ASM_MIPS_GPIO_H
+
+#include <gpio.h>
+
+#endif /* __ASM_MIPS_GPIO_H */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 92ec2618560c..7ba92890ea13 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -178,6 +178,11 @@ extern void __iounmap(const volatile void __iomem *addr);
 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 	unsigned long flags)
 {
+	void __iomem *addr = plat_ioremap(offset, size, flags);
+
+	if (addr)
+		return addr;
+
 #define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
 
 	if (cpu_has_64bit_addresses) {
@@ -207,7 +212,8 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 		 */
 		if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
 		    flags == _CACHE_UNCACHED)
-			return (void __iomem *)CKSEG1ADDR(phys_addr);
+			return (void __iomem *)
+				(unsigned long)CKSEG1ADDR(phys_addr);
 	}
 
 	return __ioremap(offset, size, flags);
@@ -282,6 +288,9 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 
 static inline void iounmap(const volatile void __iomem *addr)
 {
+	if (plat_iounmap(addr))
+		return;
+
 #define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
 
 	if (cpu_has_64bit_addresses ||
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 3ca6a076124d..97102ebc54b1 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -24,7 +24,7 @@ static inline int irq_canonicalize(int irq)
 #define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 /*
  * Clear interrupt mask handling "backstop" if irq_hwmask
  * entry so indicates. This implies that the ack() or end()
diff --git a/include/asm-mips/lasat/ds1603.h b/include/asm-mips/lasat/ds1603.h
deleted file mode 100644
index edcd7544b358..000000000000
--- a/include/asm-mips/lasat/ds1603.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <asm/addrspace.h>
-
-/* Lasat 100	*/
-#define DS1603_REG_100		(KSEG1ADDR(0x1c810000))
-#define DS1603_RST_100		(1 << 2)
-#define DS1603_CLK_100		(1 << 0)
-#define DS1603_DATA_SHIFT_100	1
-#define DS1603_DATA_100		(1 << DS1603_DATA_SHIFT_100)
-
-/* Lasat 200	*/
-#define DS1603_REG_200		(KSEG1ADDR(0x11000000))
-#define DS1603_RST_200		(1 << 3)
-#define DS1603_CLK_200		(1 << 4)
-#define DS1603_DATA_200		(1 << 5)
-
-#define DS1603_DATA_REG_200		(DS1603_REG_200 + 0x10000)
-#define DS1603_DATA_READ_SHIFT_200	9
-#define DS1603_DATA_READ_200	(1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/include/asm-mips/lasat/eeprom.h b/include/asm-mips/lasat/eeprom.h
deleted file mode 100644
index 7b53edd5cd5f..000000000000
--- a/include/asm-mips/lasat/eeprom.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <asm/addrspace.h>
-
-/* lasat 100 */
-#define AT93C_REG_100               KSEG1ADDR(0x1c810000)
-#define AT93C_RDATA_REG_100         AT93C_REG_100
-#define AT93C_RDATA_SHIFT_100       4
-#define AT93C_WDATA_SHIFT_100       4
-#define AT93C_CS_M_100              ( 1 << 5 )
-#define AT93C_CLK_M_100             ( 1 << 3 )
-
-/* lasat 200 */
-#define AT93C_REG_200		KSEG1ADDR(0x11000000)
-#define AT93C_RDATA_REG_200	(AT93C_REG_200+0x10000)
-#define AT93C_RDATA_SHIFT_200	8
-#define AT93C_WDATA_SHIFT_200	2
-#define AT93C_CS_M_200		( 1 << 0 )
-#define AT93C_CLK_M_200		( 1 << 1 )
diff --git a/include/asm-mips/lasat/head.h b/include/asm-mips/lasat/head.h
deleted file mode 100644
index f5589f31a197..000000000000
--- a/include/asm-mips/lasat/head.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Image header stuff
- */
-#ifndef _HEAD_H
-#define _HEAD_H
-
-#define LASAT_K_MAGIC0_VAL	0xfedeabba
-#define LASAT_K_MAGIC1_VAL	0x00bedead
-
-#ifndef _LANGUAGE_ASSEMBLY
-#include <linux/types.h>
-struct bootloader_header {
-	u32 magic[2];
-	u32 version;
-	u32 image_start;
-	u32 image_size;
-	u32 kernel_start;
-	u32 kernel_entry;
-};
-#endif
-
-#endif /* _HEAD_H */
diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h
deleted file mode 100644
index 42077e367a5b..000000000000
--- a/include/asm-mips/lasat/lasat.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * lasat.h
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Configuration for LASAT boards, loads the appropriate include files.
- */
-#ifndef _LASAT_H
-#define _LASAT_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-extern struct lasat_misc {
-	volatile u32 *reset_reg;
-	volatile u32 *flash_wp_reg;
-	u32 flash_wp_bit;
-} *lasat_misc;
-
-enum lasat_mtdparts {
-	LASAT_MTD_BOOTLOADER,
-	LASAT_MTD_SERVICE,
-	LASAT_MTD_NORMAL,
-	LASAT_MTD_CONFIG,
-	LASAT_MTD_FS,
-	LASAT_MTD_LAST
-};
-
-/*
- * The format of the data record in the EEPROM.
- * See Documentation/LASAT/eeprom.txt for a detailed description
- * of the fields in this struct, and the LASAT Hardware Configuration
- * field specification for a detailed description of the config
- * field.
- */
-#include <linux/types.h>
-
-#define LASAT_EEPROM_VERSION 7
-struct lasat_eeprom_struct {
-	unsigned int  version;
-	unsigned int  cfg[3];
-	unsigned char hwaddr[6];
-	unsigned char print_partno[12];
-	unsigned char term0;
-	unsigned char print_serial[14];
-	unsigned char term1;
-	unsigned char prod_partno[12];
-	unsigned char term2;
-	unsigned char prod_serial[14];
-	unsigned char term3;
-	unsigned char passwd_hash[16];
-	unsigned char pwdnull;
-	unsigned char vendid;
-	unsigned char ts_ref;
-	unsigned char ts_signoff;
-	unsigned char reserved[11];
-	unsigned char debugaccess;
-	unsigned short prid;
-	unsigned int  serviceflag;
-	unsigned int  ipaddr;
-	unsigned int  netmask;
-	unsigned int  crc32;
-};
-
-struct lasat_eeprom_struct_pre7 {
-	unsigned int  version;
-	unsigned int  flags[3];
-	unsigned char hwaddr0[6];
-	unsigned char hwaddr1[6];
-	unsigned char print_partno[9];
-	unsigned char term0;
-	unsigned char print_serial[14];
-	unsigned char term1;
-	unsigned char prod_partno[9];
-	unsigned char term2;
-	unsigned char prod_serial[14];
-	unsigned char term3;
-	unsigned char passwd_hash[24];
-	unsigned char pwdnull;
-	unsigned char vendor;
-	unsigned char ts_ref;
-	unsigned char ts_signoff;
-	unsigned char reserved[6];
-	unsigned int  writecount;
-	unsigned int  ipaddr;
-	unsigned int  netmask;
-	unsigned int  crc32;
-};
-
-/* Configuration descriptor encoding - see the doc for details */
-
-#define LASAT_W0_DSCTYPE(v)		( ( (v)         ) & 0xf )
-#define LASAT_W0_BMID(v)		( ( (v) >> 0x04 ) & 0xf )
-#define LASAT_W0_CPUTYPE(v)		( ( (v) >> 0x08 ) & 0xf )
-#define LASAT_W0_BUSSPEED(v)		( ( (v) >> 0x0c ) & 0xf )
-#define LASAT_W0_CPUCLK(v)		( ( (v) >> 0x10 ) & 0xf )
-#define LASAT_W0_SDRAMBANKSZ(v)		( ( (v) >> 0x14 ) & 0xf )
-#define LASAT_W0_SDRAMBANKS(v)		( ( (v) >> 0x18 ) & 0xf )
-#define LASAT_W0_L2CACHE(v)		( ( (v) >> 0x1c ) & 0xf )
-
-#define LASAT_W1_EDHAC(v)		( ( (v)         ) & 0xf )
-#define LASAT_W1_HIFN(v)		( ( (v) >> 0x04 ) & 0x1 )
-#define LASAT_W1_ISDN(v)		( ( (v) >> 0x05 ) & 0x1 )
-#define LASAT_W1_IDE(v)			( ( (v) >> 0x06 ) & 0x1 )
-#define LASAT_W1_HDLC(v)		( ( (v) >> 0x07 ) & 0x1 )
-#define LASAT_W1_USVERSION(v)		( ( (v) >> 0x08 ) & 0x1 )
-#define LASAT_W1_4MACS(v)		( ( (v) >> 0x09 ) & 0x1 )
-#define LASAT_W1_EXTSERIAL(v)		( ( (v) >> 0x0a ) & 0x1 )
-#define LASAT_W1_FLASHSIZE(v)		( ( (v) >> 0x0c ) & 0xf )
-#define LASAT_W1_PCISLOTS(v)		( ( (v) >> 0x10 ) & 0xf )
-#define LASAT_W1_PCI1OPT(v)		( ( (v) >> 0x14 ) & 0xf )
-#define LASAT_W1_PCI2OPT(v)		( ( (v) >> 0x18 ) & 0xf )
-#define LASAT_W1_PCI3OPT(v)		( ( (v) >> 0x1c ) & 0xf )
-
-/* Routines specific to LASAT boards */
-
-#define LASAT_BMID_MASQUERADE2		0
-#define LASAT_BMID_MASQUERADEPRO	1
-#define LASAT_BMID_SAFEPIPE25			2
-#define LASAT_BMID_SAFEPIPE50			3
-#define LASAT_BMID_SAFEPIPE100		4
-#define LASAT_BMID_SAFEPIPE5000		5
-#define LASAT_BMID_SAFEPIPE7000		6
-#define LASAT_BMID_SAFEPIPE1000		7
-//#define LASAT_BMID_SAFEPIPE30		7
-//#define LASAT_BMID_SAFEPIPE5100	8
-//#define LASAT_BMID_SAFEPIPE7100	9
-#define LASAT_BMID_UNKNOWN				0xf
-#define LASAT_MAX_BMID_NAMES			9   // no larger than 15!
-
-#define LASAT_HAS_EDHAC			( 1 << 0 )
-#define LASAT_EDHAC_FAST		( 1 << 1 )
-#define LASAT_HAS_EADI			( 1 << 2 )
-#define LASAT_HAS_HIFN			( 1 << 3 )
-#define LASAT_HAS_ISDN			( 1 << 4 )
-#define LASAT_HAS_LEASEDLINE_IF		( 1 << 5 )
-#define LASAT_HAS_HDC			( 1 << 6 )
-
-#define LASAT_PRID_MASQUERADE2		0
-#define LASAT_PRID_MASQUERADEPRO	1
-#define LASAT_PRID_SAFEPIPE25			2
-#define LASAT_PRID_SAFEPIPE50			3
-#define LASAT_PRID_SAFEPIPE100		4
-#define LASAT_PRID_SAFEPIPE5000		5
-#define LASAT_PRID_SAFEPIPE7000		6
-#define LASAT_PRID_SAFEPIPE30			7
-#define LASAT_PRID_SAFEPIPE5100		8
-#define LASAT_PRID_SAFEPIPE7100		9
-
-#define LASAT_PRID_SAFEPIPE1110		10
-#define LASAT_PRID_SAFEPIPE3020		11
-#define LASAT_PRID_SAFEPIPE3030		12
-#define LASAT_PRID_SAFEPIPE5020		13
-#define LASAT_PRID_SAFEPIPE5030		14
-#define LASAT_PRID_SAFEPIPE1120		15
-#define LASAT_PRID_SAFEPIPE1130		16
-#define LASAT_PRID_SAFEPIPE6010		17
-#define LASAT_PRID_SAFEPIPE6110		18
-#define LASAT_PRID_SAFEPIPE6210		19
-#define LASAT_PRID_SAFEPIPE1020		20
-#define LASAT_PRID_SAFEPIPE1040		21
-#define LASAT_PRID_SAFEPIPE1060		22
-
-struct lasat_info {
-	unsigned int  li_cpu_hz;
-	unsigned int  li_bus_hz;
-	unsigned int  li_bmid;
-	unsigned int  li_memsize;
-	unsigned int  li_flash_size;
-	unsigned int  li_prid;
-	unsigned char li_bmstr[16];
-	unsigned char li_namestr[32];
-	unsigned char li_typestr[16];
-	/* Info on the Flash layout */
-	unsigned int  li_flash_base;
-	unsigned long li_flashpart_base[LASAT_MTD_LAST];
-	unsigned long li_flashpart_size[LASAT_MTD_LAST];
-	struct lasat_eeprom_struct li_eeprom_info;
-	unsigned int  li_eeprom_upgrade_version;
-	unsigned int  li_debugaccess;
-};
-
-extern struct lasat_info lasat_board_info;
-
-static inline unsigned long lasat_flash_partition_start(int partno)
-{
-	if (partno < 0 || partno >= LASAT_MTD_LAST)
-		return 0;
-
-	return lasat_board_info.li_flashpart_base[partno];
-}
-
-static inline unsigned long lasat_flash_partition_size(int partno)
-{
-	if (partno < 0 || partno >= LASAT_MTD_LAST)
-		return 0;
-
-	return lasat_board_info.li_flashpart_size[partno];
-}
-
-/* Called from setup() to initialize the global board_info struct */
-extern int lasat_init_board_info(void);
-
-/* Write the modified EEPROM info struct */
-extern void lasat_write_eeprom_info(void);
-
-#define N_MACHTYPES		2
-/* for calibration of delays */
-
-/* the lasat_ndelay function is necessary because it is used at an
- * early stage of the boot process where ndelay is not calibrated.
- * It is used for the bit-banging rtc and eeprom drivers */
-
-#include <asm/delay.h>
-/* calculating with the slowest board with 100 MHz clock */
-#define LASAT_100_DIVIDER 20
-/* All 200's run at 250 MHz clock */
-#define LASAT_200_DIVIDER 8
-
-extern unsigned int lasat_ndelay_divider;
-
-static inline void lasat_ndelay(unsigned int ns)
-{
-            __delay(ns / lasat_ndelay_divider);
-}
-
-#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-
-#define LASAT_SERVICEMODE_MAGIC_1     0xdeadbeef
-#define LASAT_SERVICEMODE_MAGIC_2     0xfedeabba
-
-/* Lasat 100 boards */
-#define LASAT_GT_BASE           (KSEG1ADDR(0x14000000))
-
-/* Lasat 200 boards */
-#define Vrc5074_PHYS_BASE       0x1fa00000
-#define Vrc5074_BASE            (KSEG1ADDR(Vrc5074_PHYS_BASE))
-#define PCI_WINDOW1             0x1a000000
-
-#endif /* _LASAT_H */
diff --git a/include/asm-mips/lasat/lasatint.h b/include/asm-mips/lasat/lasatint.h
deleted file mode 100644
index 065474feeccc..000000000000
--- a/include/asm-mips/lasat/lasatint.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#define LASATINT_END 16
-
-/* lasat 100 */
-#define LASAT_INT_STATUS_REG_100	(KSEG1ADDR(0x1c880000))
-#define LASAT_INT_MASK_REG_100		(KSEG1ADDR(0x1c890000))
-#define LASATINT_MASK_SHIFT_100		0
-
-/* lasat 200 */
-#define LASAT_INT_STATUS_REG_200	(KSEG1ADDR(0x1104003c))
-#define LASAT_INT_MASK_REG_200		(KSEG1ADDR(0x1104003c))
-#define LASATINT_MASK_SHIFT_200		16
-
diff --git a/include/asm-mips/lasat/picvue.h b/include/asm-mips/lasat/picvue.h
deleted file mode 100644
index 42a492edc40e..000000000000
--- a/include/asm-mips/lasat/picvue.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Lasat 100 */
-#define PVC_REG_100		KSEG1ADDR(0x1c820000)
-#define PVC_DATA_SHIFT_100	0
-#define PVC_DATA_M_100		0xFF
-#define PVC_E_100		(1 << 8)
-#define PVC_RW_100		(1 << 9)
-#define PVC_RS_100		(1 << 10)
-
-/* Lasat 200 */
-#define PVC_REG_200		KSEG1ADDR(0x11000000)
-#define PVC_DATA_SHIFT_200	24
-#define PVC_DATA_M_200		(0xFF << PVC_DATA_SHIFT_200)
-#define PVC_E_200		(1 << 16)
-#define PVC_RW_200		(1 << 17)
-#define PVC_RS_200		(1 << 18)
diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h
deleted file mode 100644
index 9e88c7669c7a..000000000000
--- a/include/asm-mips/lasat/serial.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <asm/lasat/lasat.h>
-
-/* Lasat 100 boards serial configuration */
-#define LASAT_BASE_BAUD_100 		( 7372800 / 16 )
-#define LASAT_UART_REGS_BASE_100	0x1c8b0000
-#define LASAT_UART_REGS_SHIFT_100	2
-#define LASATINT_UART_100		8
-
-/* * LASAT 200 boards serial configuration */
-#define LASAT_BASE_BAUD_200		(100000000 / 16 / 12)
-#define LASAT_UART_REGS_BASE_200	(Vrc5074_PHYS_BASE + 0x0300)
-#define LASAT_UART_REGS_SHIFT_200	3
-#define LASATINT_UART_200		13
diff --git a/include/asm-mips/mach-au1x00/au1xxx_gpio.h b/include/asm-mips/mach-au1x00/au1xxx_gpio.h
deleted file mode 100644
index 27911e054ffc..000000000000
--- a/include/asm-mips/mach-au1x00/au1xxx_gpio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __AU1XXX_GPIO_H
-#define __AU1XXX_GPIO_H
-
-void au1xxx_gpio1_set_inputs(void);
-void au1xxx_gpio_tristate(int signal);
-void au1xxx_gpio_write(int signal, int value);
-int  au1xxx_gpio_read(int signal);
-
-typedef volatile struct
-{
-	u32 dir;
-	u32 reserved;
-	u32 output;
-	u32 pinstate;
-	u32 inten;
-	u32 enable;
-
-} AU1X00_GPIO2;
-
-#endif //__AU1XXX_GPIO_H
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
index 8fcae21adbd5..4663e8b415c9 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_ide.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -88,26 +88,26 @@ static const struct drive_list_entry dma_white_list [] = {
 /*
  * Hitachi
  */
-        { "HITACHI_DK14FA-20"    ,       "ALL"           },
-        { "HTS726060M9AT00"      ,       "ALL"           },
+        { "HITACHI_DK14FA-20"    ,       NULL            },
+        { "HTS726060M9AT00"      ,       NULL            },
 /*
  * Maxtor
  */
-        { "Maxtor 6E040L0"      ,       "ALL"           },
-        { "Maxtor 6Y080P0"      ,       "ALL"           },
-        { "Maxtor 6Y160P0"      ,       "ALL"           },
+        { "Maxtor 6E040L0"      ,       NULL            },
+        { "Maxtor 6Y080P0"      ,       NULL            },
+        { "Maxtor 6Y160P0"      ,       NULL            },
 /*
  * Seagate
  */
-        { "ST3120026A"          ,       "ALL"           },
-        { "ST320014A"           ,       "ALL"           },
-        { "ST94011A"            ,       "ALL"           },
-        { "ST340016A"           ,       "ALL"           },
+        { "ST3120026A"          ,       NULL            },
+        { "ST320014A"           ,       NULL            },
+        { "ST94011A"            ,       NULL            },
+        { "ST340016A"           ,       NULL            },
 /*
  * Western Digital
  */
-        { "WDC WD400UE-00HCT0"  ,       "ALL"           },
-        { "WDC WD400JB-00JJC0"  ,       "ALL"           },
+        { "WDC WD400UE-00HCT0"  ,       NULL            },
+        { "WDC WD400JB-00JJC0"  ,       NULL            },
         { NULL                  ,       NULL            }
 };
 
@@ -116,9 +116,9 @@ static const struct drive_list_entry dma_black_list [] = {
 /*
  * Western Digital
  */
-        { "WDC WD100EB-00CGH0"  ,       "ALL"           },
-        { "WDC WD200BB-00AUA1"  ,       "ALL"           },
-        { "WDC AC24300L"        ,       "ALL"           },
+        { "WDC WD100EB-00CGH0"  ,       NULL            },
+        { "WDC WD200BB-00AUA1"  ,       NULL            },
+        { "WDC AC24300L"        ,       NULL            },
         { NULL                  ,       NULL            }
 };
 #endif
diff --git a/include/asm-mips/mach-au1x00/gpio.h b/include/asm-mips/mach-au1x00/gpio.h
new file mode 100644
index 000000000000..2dc61e009a08
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/gpio.h
@@ -0,0 +1,69 @@
+#ifndef _AU1XXX_GPIO_H_
+#define _AU1XXX_GPIO_H_
+
+#include <linux/types.h>
+
+#define AU1XXX_GPIO_BASE	200
+
+struct au1x00_gpio2 {
+	u32	dir;
+	u32	reserved;
+	u32	output;
+	u32	pinstate;
+	u32	inten;
+	u32	enable;
+};
+
+extern int au1xxx_gpio_get_value(unsigned gpio);
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
+extern int au1xxx_gpio_direction_input(unsigned gpio);
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Not yet implemented */
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	/* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return au1xxx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return au1xxx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return au1xxx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	au1xxx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _AU1XXX_GPIO_H_ */
diff --git a/include/asm-mips/mach-au1x00/ioremap.h b/include/asm-mips/mach-au1x00/ioremap.h
index 098fca4289bb..364cea2dc71f 100644
--- a/include/asm-mips/mach-au1x00/ioremap.h
+++ b/include/asm-mips/mach-au1x00/ioremap.h
@@ -28,4 +28,15 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	return __fixup_bigphys_addr(phys_addr, size);
 }
 
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
 #endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
index 684a501c04cf..9c9d2b998ca4 100644
--- a/include/asm-mips/mach-cobalt/cobalt.h
+++ b/include/asm-mips/mach-cobalt/cobalt.h
@@ -30,7 +30,6 @@
 #define COBALT_CPU_IRQ		MIPS_CPU_IRQ_BASE
 
 #define COBALT_GALILEO_IRQ	(COBALT_CPU_IRQ + 2)
-#define COBALT_SCC_IRQ          (COBALT_CPU_IRQ + 3)	/* pre-production has 85C30 */
 #define COBALT_RAQ_SCSI_IRQ	(COBALT_CPU_IRQ + 3)
 #define COBALT_ETH0_IRQ		(COBALT_CPU_IRQ + 3)
 #define COBALT_QUBE1_ETH0_IRQ	(COBALT_CPU_IRQ + 4)
@@ -71,10 +70,6 @@
 
 extern int cobalt_board_id;
 
-#define PCI_CFG_SET(devfn,where)					\
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) |		\
-		(PCI_FUNC (devfn) << 8) | (where)))
-
 #define COBALT_LED_PORT		(*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
 # define COBALT_LED_BAR_LEFT	(1 << 0)	/* Qube */
 # define COBALT_LED_BAR_RIGHT	(1 << 1)	/* Qube */
diff --git a/include/asm-mips/mach-ev64120/mach-gt64120.h b/include/asm-mips/mach-ev64120/mach-gt64120.h
deleted file mode 100644
index 7e272ce57ea3..000000000000
--- a/include/asm-mips/mach-ev64120/mach-gt64120.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *  This is a direct copy of the ev96100.h file, with a global
- * search and replace.  The numbers are the same.
- *
- *  The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H
-#define __ASM_GALILEO_BOARDS_MIPS_EV64120_H
-
-/*
- *   GT64120 config space base address
- */
-extern unsigned long gt64120_base;
-
-#define GT64120_BASE	(gt64120_base)
-
-/*
- *   PCI Bus allocation
- */
-#define GT_PCI_MEM_BASE	0x12000000UL
-#define GT_PCI_MEM_SIZE	0x02000000UL
-#define GT_PCI_IO_BASE	0x10000000UL
-#define GT_PCI_IO_SIZE	0x02000000UL
-#define GT_ISA_IO_BASE	PCI_IO_BASE
-
-/*
- *   Duart I/O ports.
- */
-#define EV64120_COM1_BASE_ADDR	(0x1d000000 + 0x20)
-#define EV64120_COM2_BASE_ADDR	(0x1d000000 + 0x00)
-
-
-/*
- *   EV64120 interrupt controller register base.
- */
-#define EV64120_ICTRL_REGS_BASE	(KSEG1ADDR(0x1f000000))
-
-/*
- *   EV64120 UART register base.
- */
-#define EV64120_UART0_REGS_BASE	(KSEG1ADDR(EV64120_COM1_BASE_ADDR))
-#define EV64120_UART1_REGS_BASE	(KSEG1ADDR(EV64120_COM2_BASE_ADDR))
-#define EV64120_BASE_BAUD ( 3686400 / 16 )
-#define EV64120_UART_IRQ	6
-
-/*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
- * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
- * boards, they all either come in on IntD or they all come in on IntA, they
- * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
- * "requested" interrupt numbers and go through the list whenever we get an
- * IntA/D.
- *
- * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
- * INTD is 11.
- */
-#define GT_TIMER	4
-#define GT_INTA		2
-#define GT_INTD		5
-
-#endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */
diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h
new file mode 100644
index 000000000000..6eaf5efedf3a
--- /dev/null
+++ b/include/asm-mips/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/include/asm-mips/mach-generic/ioremap.h b/include/asm-mips/mach-generic/ioremap.h
index 9b64ff6e485d..b379938d47f0 100644
--- a/include/asm-mips/mach-generic/ioremap.h
+++ b/include/asm-mips/mach-generic/ioremap.h
@@ -20,4 +20,15 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	return phys_addr;
 }
 
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
 #endif /* __ASM_MACH_GENERIC_IOREMAP_H */
diff --git a/include/asm-mips/mach-generic/spaces.h b/include/asm-mips/mach-generic/spaces.h
index 0ae9997bc9a8..c9fa4b14968d 100644
--- a/include/asm-mips/mach-generic/spaces.h
+++ b/include/asm-mips/mach-generic/spaces.h
@@ -10,38 +10,54 @@
 #ifndef _ASM_MACH_GENERIC_SPACES_H
 #define _ASM_MACH_GENERIC_SPACES_H
 
+#include <linux/const.h>
+
+/*
+ * This gives the physical RAM offset.
+ */
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET		_AC(0, UL)
+#endif
 
 #ifdef CONFIG_32BIT
 
-#define CAC_BASE		0x80000000
-#define IO_BASE			0xa0000000
-#define UNCAC_BASE		0xa0000000
-#define MAP_BASE		0xc0000000
+#define CAC_BASE		_AC(0x80000000, UL)
+#define IO_BASE			_AC(0xa0000000, UL)
+#define UNCAC_BASE		_AC(0xa0000000, UL)
 
-/*
- * This handles the memory map.
- * We handle pages at KSEG0 for kernels with 32 bit address space.
- */
-#define PAGE_OFFSET		0x80000000UL
+#ifndef MAP_BASE
+#define MAP_BASE		_AC(0xc0000000, UL)
+#endif
 
 /*
  * Memory above this physical address will be considered highmem.
  */
 #ifndef HIGHMEM_START
-#define HIGHMEM_START		0x20000000UL
+#define HIGHMEM_START		_AC(0x20000000, UL)
 #endif
 
 #endif /* CONFIG_32BIT */
 
 #ifdef CONFIG_64BIT
 
-/*
- * This handles the memory map.
- */
+#ifndef CAC_BASE
 #ifdef CONFIG_DMA_NONCOHERENT
-#define PAGE_OFFSET	0x9800000000000000UL
+#define CAC_BASE		_AC(0x9800000000000000, UL)
 #else
-#define PAGE_OFFSET	0xa800000000000000UL
+#define CAC_BASE		_AC(0xa800000000000000, UL)
+#endif
+#endif
+
+#ifndef IO_BASE
+#define IO_BASE			_AC(0x9000000000000000, UL)
+#endif
+
+#ifndef UNCAC_BASE
+#define UNCAC_BASE		_AC(0x9000000000000000, UL)
+#endif
+
+#ifndef MAP_BASE
+#define MAP_BASE		_AC(0xc000000000000000, UL)
 #endif
 
 /*
@@ -50,22 +66,20 @@
  * in the distant future.  Nobody will care for a few years :-)
  */
 #ifndef HIGHMEM_START
-#define HIGHMEM_START		(1UL << 59UL)
+#define HIGHMEM_START		(_AC(1, UL) << _AC(59, UL))
 #endif
 
-#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE		0x9800000000000000UL
-#else
-#define CAC_BASE		0xa800000000000000UL
-#endif
-#define IO_BASE			0x9000000000000000UL
-#define UNCAC_BASE		0x9000000000000000UL
-#define MAP_BASE		0xc000000000000000UL
-
 #define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
 #define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
 #define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
 
 #endif /* CONFIG_64BIT */
 
+/*
+ * This handles the memory map.
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(CAC_BASE + PHYS_OFFSET)
+#endif
+
 #endif /* __ASM_MACH_GENERIC_SPACES_H */
diff --git a/include/asm-mips/mach-ip22/spaces.h b/include/asm-mips/mach-ip22/spaces.h
index ab20c026fd19..7f9fa6f66059 100644
--- a/include/asm-mips/mach-ip22/spaces.h
+++ b/include/asm-mips/mach-ip22/spaces.h
@@ -11,44 +11,17 @@
 #define _ASM_MACH_IP22_SPACES_H
 
 
-#ifdef CONFIG_32BIT
-
-#define CAC_BASE		0x80000000
-#define IO_BASE			0xa0000000
-#define UNCAC_BASE		0xa0000000
-#define MAP_BASE		0xc0000000
-
-/*
- * This handles the memory map.
- * We handle pages at KSEG0 for kernels with 32 bit address space.
- */
-#define PAGE_OFFSET		0x80000000UL
-
-/*
- * Memory above this physical address will be considered highmem.
- */
-#ifndef HIGHMEM_START
-#define HIGHMEM_START		0x20000000UL
-#endif
-
-#endif /* CONFIG_32BIT */
-
 #ifdef CONFIG_64BIT
-#define PAGE_OFFSET		0xffffffff80000000UL
 
-#ifndef HIGHMEM_START
-#define HIGHMEM_START		(1UL << 59UL)
-#endif
+#define PAGE_OFFSET		0xffffffff80000000UL
 
 #define CAC_BASE		0xffffffff80000000
 #define IO_BASE			0xffffffffa0000000
 #define UNCAC_BASE		0xffffffffa0000000
 #define MAP_BASE		0xc000000000000000
 
-#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
-#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
-#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
-
 #endif /* CONFIG_64BIT */
 
+#include <asm/mach-generic/spaces.h>
+
 #endif /* __ASM_MACH_IP22_SPACES_H */
diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h
index 45e61785ef42..b18802a0b17e 100644
--- a/include/asm-mips/mach-ip27/spaces.h
+++ b/include/asm-mips/mach-ip27/spaces.h
@@ -14,22 +14,17 @@
  * IP27 uses the R10000's uncached attribute feature.  Attribute 3 selects
  * uncached memory addressing.
  */
-#define CAC_BASE		0xa800000000000000
 
 #define HSPEC_BASE		0x9000000000000000
 #define IO_BASE			0x9200000000000000
 #define MSPEC_BASE		0x9400000000000000
 #define UNCAC_BASE		0x9600000000000000
-#define MAP_BASE		0xc000000000000000
 
-#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
-#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
-#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
 #define TO_MSPEC(x)		(MSPEC_BASE | ((x) & TO_PHYS_MASK))
 #define TO_HSPEC(x)		(HSPEC_BASE | ((x) & TO_PHYS_MASK))
 
-#define PAGE_OFFSET		CAC_BASE
-
 #define HIGHMEM_START		(~0UL)
 
+#include <asm/mach-generic/spaces.h>
+
 #endif /* _ASM_MACH_IP27_SPACES_H */
diff --git a/include/asm-mips/mach-ip32/dma-coherence.h b/include/asm-mips/mach-ip32/dma-coherence.h
index c3f9a6a20eb0..a5511ebb2d53 100644
--- a/include/asm-mips/mach-ip32/dma-coherence.h
+++ b/include/asm-mips/mach-ip32/dma-coherence.h
@@ -6,8 +6,8 @@
  * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
  *
  */
-#ifndef __ASM_MACH_IP35_DMA_COHERENCE_H
-#define __ASM_MACH_IP35_DMA_COHERENCE_H
+#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
+#define __ASM_MACH_IP32_DMA_COHERENCE_H
 
 #include <asm/ip32/crime.h>
 
@@ -69,4 +69,4 @@ static inline int plat_device_is_coherent(struct device *dev)
 	return 0;		/* IP32 is non-cohernet */
 }
 
-#endif /* __ASM_MACH_IP35_DMA_COHERENCE_H */
+#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
diff --git a/include/asm-mips/mach-ip32/spaces.h b/include/asm-mips/mach-ip32/spaces.h
deleted file mode 100644
index 44abe5c02389..000000000000
--- a/include/asm-mips/mach-ip32/spaces.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 - 1999, 2000, 03, 04, 05 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000, 2002  Maciej W. Rozycki
- * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
- */
-#ifndef _ASM_MACH_IP32_SPACES_H
-#define _ASM_MACH_IP32_SPACES_H
-
-/*
- * Memory above this physical address will be considered highmem.
- * Fixme: 59 bits is a fictive number and makes assumptions about processors
- * in the distant future.  Nobody will care for a few years :-)
- */
-#ifndef HIGHMEM_START
-#define HIGHMEM_START		(1UL << 59UL)
-#endif
-
-#define CAC_BASE		0x9800000000000000UL
-#define IO_BASE			0x9000000000000000UL
-#define UNCAC_BASE		0x9000000000000000UL
-#define MAP_BASE		0xc000000000000000UL
-
-#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
-#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
-#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
-
-/*
- * This handles the memory map.
- */
-#define PAGE_OFFSET		CAC_BASE
-
-#endif /* __ASM_MACH_IP32_SPACES_H */
diff --git a/include/asm-mips/mach-jmr3927/ioremap.h b/include/asm-mips/mach-jmr3927/ioremap.h
new file mode 100644
index 000000000000..aa131ad7f717
--- /dev/null
+++ b/include/asm-mips/mach-jmr3927/ioremap.h
@@ -0,0 +1,38 @@
+/*
+ *	include/asm-mips/mach-jmr3927/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_JMR3927_IOREMAP_H
+#define __ASM_MACH_JMR3927_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+#define TXX9_DIRECTMAP_BASE	0xff000000ul
+	if (offset >= TXX9_DIRECTMAP_BASE &&
+	    offset < TXX9_DIRECTMAP_BASE + 0xf0000)
+		return (void __iomem *)offset;
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= TXX9_DIRECTMAP_BASE;
+}
+
+#endif /* __ASM_MACH_JMR3927_IOREMAP_H */
diff --git a/include/asm-mips/mach-lasat/mach-gt64120.h b/include/asm-mips/mach-lasat/mach-gt64120.h
deleted file mode 100644
index 1a9ad45cc135..000000000000
--- a/include/asm-mips/mach-lasat/mach-gt64120.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  This is a direct copy of the ev96100.h file, with a global
- * search and replace.  The numbers are the same.
- *
- *  The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
-#define _ASM_GT64120_LASAT_GT64120_DEP_H
-
-/*
- *   GT64120 config space base address on Lasat 100
- */
-#define GT64120_BASE	(KSEG1ADDR(0x14000000))
-
-/*
- *   PCI Bus allocation
- *
- *   (Guessing ...)
- */
-#define GT_PCI_MEM_BASE	0x12000000UL
-#define GT_PCI_MEM_SIZE	0x02000000UL
-#define GT_PCI_IO_BASE	0x10000000UL
-#define GT_PCI_IO_SIZE	0x02000000UL
-#define GT_ISA_IO_BASE	PCI_IO_BASE
-
-#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/include/asm-mips/mach-lemote/dma-coherence.h b/include/asm-mips/mach-lemote/dma-coherence.h
new file mode 100644
index 000000000000..7e914777ebc4
--- /dev/null
+++ b/include/asm-mips/mach-lemote/dma-coherence.h
@@ -0,0 +1,42 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+					  size_t size)
+{
+	return virt_to_phys(addr) | 0x80000000;
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+					       struct page *page)
+{
+	return page_to_phys(page) | 0x80000000;
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr & 0x7fffffff;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
diff --git a/include/asm-mips/mach-lemote/mc146818rtc.h b/include/asm-mips/mach-lemote/mc146818rtc.h
new file mode 100644
index 000000000000..ed5147e11085
--- /dev/null
+++ b/include/asm-mips/mach-lemote/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
+#define __ASM_MACH_LEMOTE_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
diff --git a/include/asm-mips/mach-mips/kernel-entry-init.h b/include/asm-mips/mach-mips/kernel-entry-init.h
new file mode 100644
index 000000000000..0b793e7bf67e
--- /dev/null
+++ b/include/asm-mips/mach-mips/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Chris Dearman (chris@mips.com)
+ * Copyright (C) 2007 Mips Technologies, Inc.
+ */
+#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+
+	.macro	kernel_entry_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+	mfc0	t0, CP0_CONFIG
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 1
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 2
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 3
+	and	t0, 1<<2
+	bnez	t0, 0f
+9:
+	/* Assume we came from YAMON... */
+	PTR_LA	v0, 0x9fc00534	/* YAMON print */
+	lw	v0, (v0)
+	move	a0, zero
+	PTR_LA	a1, nonmt_processor
+	jal	v0
+
+	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
+	lw	v0, (v0)
+	li	a0, 1
+	jal	v0
+
+1:	b	1b
+
+	__INITDATA
+nonmt_processor:
+	.asciz	"SMTC kernel requires the MT ASE to run\n"
+	__FINIT
+0:
+#endif
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute C code.
+ */
+	.macro	smp_slave_setup
+	.endm
+
+#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/include/asm-mips/mach-sim/cpu-feature-overrides.h b/include/asm-mips/mach-mipssim/cpu-feature-overrides.h
index 779b02205737..779b02205737 100644
--- a/include/asm-mips/mach-sim/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-mipssim/cpu-feature-overrides.h
diff --git a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
deleted file mode 100644
index 57a12ded0613..000000000000
--- a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- * Copyright (C) 2004 Ralf Baechle
- */
-#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Momentum Ocelot-3 is based on Rm7900 processor which
- * is based on the E9000 core.
- */
-#define cpu_has_watch		1
-#define cpu_has_mips16		0
-#define cpu_has_divec		0
-#define cpu_has_vce		0
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_prefetch	1
-#define cpu_has_mcheck		0
-#define cpu_has_ejtag		0
-
-#define cpu_has_llsc		1
-#define cpu_has_vtag_icache	0
-#define cpu_has_dc_aliases	0
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_dsp		0
-#define cpu_icache_snoops_remote_store	0
-
-#define cpu_has_nofpuex 	0
-#define cpu_has_64bits		1
-
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-
-#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-tx49xx/ioremap.h b/include/asm-mips/mach-tx49xx/ioremap.h
new file mode 100644
index 000000000000..1e7beae72229
--- /dev/null
+++ b/include/asm-mips/mach-tx49xx/ioremap.h
@@ -0,0 +1,43 @@
+/*
+ *	include/asm-mips/mach-tx49xx/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX49XX_IOREMAP_H
+#define __ASM_MACH_TX49XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+#ifdef CONFIG_64BIT
+#define TXX9_DIRECTMAP_BASE	0xfff000000ul
+#else
+#define TXX9_DIRECTMAP_BASE	0xff000000ul
+#endif
+	if (offset >= TXX9_DIRECTMAP_BASE &&
+	    offset < TXX9_DIRECTMAP_BASE + 0x400000)
+		return (void __iomem *)(unsigned long)(int)offset;
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >=
+		(unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff);
+}
+
+#endif /* __ASM_MACH_TX49XX_IOREMAP_H */
diff --git a/include/asm-mips/mips-boards/bonito64.h b/include/asm-mips/mips-boards/bonito64.h
index cd7125610100..dc3fc32eedd8 100644
--- a/include/asm-mips/mips-boards/bonito64.h
+++ b/include/asm-mips/mips-boards/bonito64.h
@@ -26,7 +26,12 @@
 /* offsets from base register */
 #define BONITO(x)	(x)
 
-#else /* !__ASSEMBLY__ */
+#elif defined(CONFIG_LEMOTE_FULONG)
+
+#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
+#define BONITO_IRQ_BASE   32
+
+#else
 
 /*
  * Algorithmics Bonito64 system controller register base.
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 9985cb7c16e7..18f47f1e8cd5 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2000 Silicon Graphics, Inc.
  * Modified for further R[236]000 support by Paul M. Antoine, 1996.
  * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
  * Copyright (C) 2003, 2004  Maciej W. Rozycki
  */
 #ifndef _ASM_MIPSREGS_H
@@ -15,6 +15,7 @@
 
 #include <linux/linkage.h>
 #include <asm/hazards.h>
+#include <asm/war.h>
 
 /*
  * The following macros are especially useful for __asm__
@@ -533,6 +534,12 @@
 #define MIPS_CONF3_VEIC		(_ULCAST_(1) <<  6)
 #define MIPS_CONF3_LPA		(_ULCAST_(1) <<  7)
 #define MIPS_CONF3_DSP		(_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS		(_ULCAST_(1) << 2)
+
 
 /*
  * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
@@ -700,10 +707,10 @@ do {									\
  */
 #define __read_64bit_c0_split(source, sel)				\
 ({									\
-	unsigned long long val;						\
-	unsigned long flags;						\
+	unsigned long long __val;					\
+	unsigned long __flags;						\
 									\
-	local_irq_save(flags);						\
+	local_irq_save(__flags);					\
 	if (sel == 0)							\
 		__asm__ __volatile__(					\
 			".set\tmips64\n\t"				\
@@ -712,7 +719,7 @@ do {									\
 			"dsrl\t%M0, %M0, 32\n\t"			\
 			"dsrl\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
-			: "=r" (val));					\
+			: "=r" (__val));				\
 	else								\
 		__asm__ __volatile__(					\
 			".set\tmips64\n\t"				\
@@ -721,17 +728,17 @@ do {									\
 			"dsrl\t%M0, %M0, 32\n\t"			\
 			"dsrl\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
-			: "=r" (val));					\
-	local_irq_restore(flags);					\
+			: "=r" (__val));				\
+	local_irq_restore(__flags);					\
 									\
-	val;								\
+	__val;								\
 })
 
 #define __write_64bit_c0_split(source, sel, val)			\
 do {									\
-	unsigned long flags;						\
+	unsigned long __flags;						\
 									\
-	local_irq_save(flags);						\
+	local_irq_save(__flags);					\
 	if (sel == 0)							\
 		__asm__ __volatile__(					\
 			".set\tmips64\n\t"				\
@@ -752,7 +759,7 @@ do {									\
 			"dmtc0\t%L0, " #source ", " #sel "\n\t"		\
 			".set\tmips0"					\
 			: : "r" (val));					\
-	local_irq_restore(flags);					\
+	local_irq_restore(__flags);					\
 } while (0)
 
 #define read_c0_index()		__read_32bit_c0_register($0, 0)
@@ -770,6 +777,9 @@ do {									\
 #define read_c0_context()	__read_ulong_c0_register($4, 0)
 #define write_c0_context(val)	__write_ulong_c0_register($4, 0, val)
 
+#define read_c0_userlocal()	__read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val)	__write_ulong_c0_register($4, 2, val)
+
 #define read_c0_pagemask()	__read_32bit_c0_register($5, 0)
 #define write_c0_pagemask(val)	__write_32bit_c0_register($5, 0, val)
 
@@ -1292,10 +1302,39 @@ static inline void tlb_probe(void)
 
 static inline void tlb_read(void)
 {
+#if MIPS34K_MISSED_ITLB_WAR
+	int res = 0;
+
+	__asm__ __volatile__(
+	"	.set	push					\n"
+	"	.set	noreorder				\n"
+	"	.set	noat					\n"
+	"	.set	mips32r2				\n"
+	"	.word	0x41610001		# dvpe $1	\n"
+	"	move	%0, $1					\n"
+	"	ehb						\n"
+	"	.set	pop					\n"
+	: "=r" (res));
+
+	instruction_hazard();
+#endif
+
 	__asm__ __volatile__(
 		".set noreorder\n\t"
 		"tlbr\n\t"
 		".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+	if ((res & _ULCAST_(1)))
+		__asm__ __volatile__(
+		"	.set	push				\n"
+		"	.set	noreorder			\n"
+		"	.set	noat				\n"
+		"	.set	mips32r2			\n"
+		"	.word	0x41600021	# evpe		\n"
+		"	ehb					\n"
+		"	.set	pop				\n");
+#endif
 }
 
 static inline void tlb_write_indexed(void)
diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h
index 399d03f1c4fc..de6d09ebbd80 100644
--- a/include/asm-mips/module.h
+++ b/include/asm-mips/module.h
@@ -112,6 +112,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "RM9000 "
 #elif defined CONFIG_CPU_SB1
 #define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON2
+#define MODULE_PROC_FAMILY "LOONGSON2 "
 #else
 #error MODULE_PROC_FAMILY undefined for your processor configuration
 #endif
@@ -122,6 +124,13 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_KERNEL_TYPE "64BIT "
 #endif
 
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+#ifdef CONFIG_MIPS_MT_SMTC
+#define MODULE_KERNEL_SMTC "MT_SMTC "
+#else
+#define MODULE_KERNEL_SMTC ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
 
 #endif /* _ASM_MODULE_H */
diff --git a/include/asm-mips/nile4.h b/include/asm-mips/nile4.h
deleted file mode 100644
index c3ca959aa4d9..000000000000
--- a/include/asm-mips/nile4.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- *
- *  This file is based on the following documentation:
- *
- *	NEC Vrc 5074 System Controller Data Sheet, June 1998
- */
-
-#ifndef _ASM_NILE4_H
-#define _ASM_NILE4_H
-
-#define NILE4_BASE		0xbfa00000
-#define NILE4_SIZE		0x00200000		/* 2 MB */
-
-
-    /*
-     *  Physical Device Address Registers (PDARs)
-     */
-
-#define NILE4_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
-#define NILE4_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
-#define NILE4_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
-#define NILE4_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
-#define NILE4_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
-#define NILE4_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
-#define NILE4_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
-#define NILE4_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
-#define NILE4_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
-#define NILE4_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
-#define NILE4_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
-#define NILE4_INTCS	0x0070	/* Controller Internal Registers and Devices */
-				/* [R/W] */
-#define NILE4_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
-
-
-    /*
-     *  CPU Interface Registers
-     */
-
-#define NILE4_CPUSTAT	0x0080	/* CPU Status [R/W] */
-#define NILE4_INTCTRL	0x0088	/* Interrupt Control [R/W] */
-#define NILE4_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
-#define NILE4_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
-				/* Enable [R/W] */
-#define NILE4_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
-#define NILE4_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
-
-
-    /*
-     *  Memory-Interface Registers
-     */
-
-#define NILE4_MEMCTRL	0x00C0	/* Memory Control */
-#define NILE4_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
-#define NILE4_CHKERR	0x00D0	/* Memory Check Error Status [R] */
-
-
-    /*
-     *  PCI-Bus Registers
-     */
-
-#define NILE4_PCICTRL	0x00E0	/* PCI Control [R/W] */
-#define NILE4_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
-#define NILE4_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
-#define NILE4_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
-#define NILE4_PCIERR	0x00B8	/* PCI Error [R/W] */
-
-
-    /*
-     *  Local-Bus Registers
-     */
-
-#define NILE4_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
-#define NILE4_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
-#define NILE4_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
-#define NILE4_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
-#define NILE4_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
-#define NILE4_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
-#define NILE4_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
-#define NILE4_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
-#define NILE4_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
-				/* Enables [R/W] */
-#define NILE4_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
-#define NILE4_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
-
-
-    /*
-     *  DMA Registers
-     */
-
-#define NILE4_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
-#define NILE4_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
-#define NILE4_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
-#define NILE4_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
-#define NILE4_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
-#define NILE4_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
-
-
-    /*
-     *  Timer Registers
-     */
-
-#define NILE4_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
-#define NILE4_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
-#define NILE4_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
-#define NILE4_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
-#define NILE4_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
-#define NILE4_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
-#define NILE4_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
-#define NILE4_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
-
-
-    /*
-     *  PCI Configuration Space Registers
-     */
-
-#define NILE4_PCI_BASE	0x0200
-
-#define NILE4_VID	0x0200	/* PCI Vendor ID [R] */
-#define NILE4_DID	0x0202	/* PCI Device ID [R] */
-#define NILE4_PCICMD	0x0204	/* PCI Command [R/W] */
-#define NILE4_PCISTS	0x0206	/* PCI Status [R/W] */
-#define NILE4_REVID	0x0208	/* PCI Revision ID [R] */
-#define NILE4_CLASS	0x0209	/* PCI Class Code [R] */
-#define NILE4_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
-#define NILE4_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
-#define NILE4_HTYPE	0x020E	/* PCI Header Type [R] */
-#define NILE4_BIST	0x020F	/* BIST [R] (unimplemented) */
-#define NILE4_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
-#define NILE4_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
-#define NILE4_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
-#define NILE4_CIS	0x0228	/* PCI Cardbus CIS Pointer [R] */
-				/* (unimplemented) */
-#define NILE4_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
-#define NILE4_SSID	0x022E	/* PCI Sub-System ID [R/W] */
-#define NILE4_ROM	0x0230	/* Expansion ROM Base Address [R] */
-				/* (unimplemented) */
-#define NILE4_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
-#define NILE4_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
-#define NILE4_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
-#define NILE4_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
-#define NILE4_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
-#define NILE4_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
-#define NILE4_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
-#define NILE4_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
-#define NILE4_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
-#define NILE4_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
-#define NILE4_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
-#define NILE4_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
-
-
-    /*
-     *  Serial-Port Registers
-     */
-
-#define NILE4_UART_BASE	0x0300
-
-#define NILE4_UARTRBR	0x0300	/* UART Receiver Data Buffer [R] */
-#define NILE4_UARTTHR	0x0300	/* UART Transmitter Data Holding [W] */
-#define NILE4_UARTIER	0x0308	/* UART Interrupt Enable [R/W] */
-#define NILE4_UARTDLL	0x0300	/* UART Divisor Latch LSB [R/W] */
-#define NILE4_UARTDLM	0x0308	/* UART Divisor Latch MSB [R/W] */
-#define NILE4_UARTIIR	0x0310	/* UART Interrupt ID [R] */
-#define NILE4_UARTFCR	0x0310	/* UART FIFO Control [W] */
-#define NILE4_UARTLCR	0x0318	/* UART Line Control [R/W] */
-#define NILE4_UARTMCR	0x0320	/* UART Modem Control [R/W] */
-#define NILE4_UARTLSR	0x0328	/* UART Line Status [R/W] */
-#define NILE4_UARTMSR	0x0330	/* UART Modem Status [R/W] */
-#define NILE4_UARTSCR	0x0338	/* UART Scratch [R/W] */
-
-#define NILE4_UART_BASE_BAUD	520833	/* 100 MHz / 12 / 16 */
-
-
-    /*
-     *  Interrupt Lines
-     */
-
-#define NILE4_INT_CPCE	0	/* CPU-Interface Parity-Error Interrupt */
-#define NILE4_INT_CNTD	1	/* CPU No-Target Decode Interrupt */
-#define NILE4_INT_MCE	2	/* Memory-Check Error Interrupt */
-#define NILE4_INT_DMA	3	/* DMA Controller Interrupt */
-#define NILE4_INT_UART	4	/* UART Interrupt */
-#define NILE4_INT_WDOG	5	/* Watchdog Timer Interrupt */
-#define NILE4_INT_GPT	6	/* General-Purpose Timer Interrupt */
-#define NILE4_INT_LBRTD	7	/* Local-Bus Ready Timer Interrupt */
-#define NILE4_INT_INTA	8	/* PCI Interrupt Signal INTA# */
-#define NILE4_INT_INTB	9	/* PCI Interrupt Signal INTB# */
-#define NILE4_INT_INTC	10	/* PCI Interrupt Signal INTC# */
-#define NILE4_INT_INTD	11	/* PCI Interrupt Signal INTD# */
-#define NILE4_INT_INTE	12	/* PCI Interrupt Signal INTE# (ISA cascade) */
-#define NILE4_INT_RESV	13	/* Reserved */
-#define NILE4_INT_PCIS	14	/* PCI SERR# Interrupt */
-#define NILE4_INT_PCIE	15	/* PCI Internal Error Interrupt */
-
-
-    /*
-     *  Nile 4 Register Access
-     */
-
-static inline void nile4_sync(void)
-{
-    volatile u32 *p = (volatile u32 *)0xbfc00000;
-    (void)(*p);
-}
-
-static inline void nile4_out32(u32 offset, u32 val)
-{
-    *(volatile u32 *)(NILE4_BASE+offset) = val;
-    nile4_sync();
-}
-
-static inline u32 nile4_in32(u32 offset)
-{
-    u32 val = *(volatile u32 *)(NILE4_BASE+offset);
-    nile4_sync();
-    return val;
-}
-
-static inline void nile4_out16(u32 offset, u16 val)
-{
-    *(volatile u16 *)(NILE4_BASE+offset) = val;
-    nile4_sync();
-}
-
-static inline u16 nile4_in16(u32 offset)
-{
-    u16 val = *(volatile u16 *)(NILE4_BASE+offset);
-    nile4_sync();
-    return val;
-}
-
-static inline void nile4_out8(u32 offset, u8 val)
-{
-    *(volatile u8 *)(NILE4_BASE+offset) = val;
-    nile4_sync();
-}
-
-static inline u8 nile4_in8(u32 offset)
-{
-    u8 val = *(volatile u8 *)(NILE4_BASE+offset);
-    nile4_sync();
-    return val;
-}
-
-
-    /*
-     *  Physical Device Address Registers
-     */
-
-extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
-			   int on_memory_bus, int visible);
-
-
-    /*
-     *  PCI Master Registers
-     */
-
-#define NILE4_PCICMD_IACK	0	/* PCI Interrupt Acknowledge */
-#define NILE4_PCICMD_IO		1	/* PCI I/O Space */
-#define NILE4_PCICMD_MEM	3	/* PCI Memory Space */
-#define NILE4_PCICMD_CFG	5	/* PCI Configuration Space */
-
-
-    /*
-     *  PCI Address Spaces
-     *
-     *  Note that these are multiplexed using PCIINIT[01]!
-     */
-
-#define NILE4_PCI_IO_BASE	0xa6000000
-#define NILE4_PCI_MEM_BASE	0xa8000000
-#define NILE4_PCI_CFG_BASE	NILE4_PCI_MEM_BASE
-#define NILE4_PCI_IACK_BASE	NILE4_PCI_IO_BASE
-
-
-extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
-
-
-    /*
-     *  Interrupt Programming
-     */
-
-#define NUM_I8259_INTERRUPTS	16
-#define NUM_NILE4_INTERRUPTS	16
-
-#define IRQ_I8259_CASCADE	NILE4_INT_INTE
-#define is_i8259_irq(irq)	((irq) < NUM_I8259_INTERRUPTS)
-#define nile4_to_irq(n)		((n)+NUM_I8259_INTERRUPTS)
-#define irq_to_nile4(n)		((n)-NUM_I8259_INTERRUPTS)
-
-extern void nile4_map_irq(int nile4_irq, int cpu_irq);
-extern void nile4_map_irq_all(int cpu_irq);
-extern void nile4_enable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq_all(void);
-extern u16 nile4_get_irq_stat(int cpu_irq);
-extern void nile4_enable_irq_output(int cpu_irq);
-extern void nile4_disable_irq_output(int cpu_irq);
-extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
-extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
-extern void nile4_clear_irq(int nile4_irq);
-extern void nile4_clear_irq_mask(u32 mask);
-extern u8 nile4_i8259_iack(void);
-extern void nile4_dump_irq_status(void);	/* Debug */
-
-#endif
-
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 5c3239dad0f2..b92dd8c760da 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -34,12 +34,8 @@
 
 #ifndef __ASSEMBLY__
 
-/*
- * This gives the physical RAM offset.
- */
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET		0UL
-#endif
+#include <linux/pfn.h>
+#include <asm/io.h>
 
 /*
  * It's normally defined only for FLATMEM config but it's
@@ -48,9 +44,6 @@
  */
 #define ARCH_PFN_OFFSET		PFN_UP(PHYS_OFFSET)
 
-#include <linux/pfn.h>
-#include <asm/io.h>
-
 extern void clear_page(void * page);
 extern void copy_page(void * to, void * from);
 
@@ -150,11 +143,15 @@ typedef struct { unsigned long pgprot; } pgprot_t;
  * __pa()/__va() should be used only during mem init.
  */
 #if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
-#define __pa_page_offset(x)	((unsigned long)(x) < CKSEG0 ? PAGE_OFFSET : CKSEG0)
+#define __pa(x)								\
+({									\
+    unsigned long __x = (unsigned long)(x);				\
+    __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x);			\
+})
 #else
-#define __pa_page_offset(x)	PAGE_OFFSET
+#define __pa(x)								\
+    ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
 #endif
-#define __pa(x)		((unsigned long)(x) - __pa_page_offset(x) + PHYS_OFFSET)
 #define __va(x)		((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
 #define __pa_symbol(x)	__pa(RELOC_HIDE((unsigned long)(x),0))
 
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index 3eea3ba0fca5..4fcc185cb2d1 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -56,7 +56,7 @@ extern void register_pci_controller(struct pci_controller *hose);
 /*
  * board supplied pci irq fixup routine
  */
-extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 
 
 /* Can be used to override the logic in pci_scan_bus for skipping
@@ -121,20 +121,6 @@ extern unsigned int PCI_DMA_BUS_IS_PHYS;
 
 #endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
 
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask)	(1)
-
-extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
-	struct page *page, unsigned long offset, int direction);
-extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
-	dma64_addr_t dma_addr);
-extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
-	dma64_addr_t dma_addr);
-extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
-	dma64_addr_t dma_addr, size_t len, int direction);
-extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
-	dma64_addr_t dma_addr, size_t len, int direction);
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
@@ -181,10 +167,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
 
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
 /* Do platform specific device initialization at pci_enable_device() time */
 extern int pcibios_plat_dev_init(struct pci_dev *dev);
 
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 27d77d981937..2e2d70d13ff6 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -178,9 +178,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
-static inline int pte_user(pte_t pte)	{ BUG(); return 0; }
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
-static inline int pte_read(pte_t pte)	{ return pte.pte_low & _PAGE_READ; }
 static inline int pte_write(pte_t pte)	{ return pte.pte_low & _PAGE_WRITE; }
 static inline int pte_dirty(pte_t pte)	{ return pte.pte_low & _PAGE_MODIFIED; }
 static inline int pte_young(pte_t pte)	{ return pte.pte_low & _PAGE_ACCESSED; }
@@ -193,13 +191,6 @@ static inline pte_t pte_wrprotect(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_rdprotect(pte_t pte)
-{
-	pte.pte_low  &= ~(_PAGE_READ | _PAGE_SILENT_READ);
-	pte.pte_high &= ~_PAGE_SILENT_READ;
-	return pte;
-}
-
 static inline pte_t pte_mkclean(pte_t pte)
 {
 	pte.pte_low  &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
@@ -224,16 +215,6 @@ static inline pte_t pte_mkwrite(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_mkread(pte_t pte)
-{
-	pte.pte_low |= _PAGE_READ;
-	if (pte.pte_low & _PAGE_ACCESSED) {
-		pte.pte_low  |= _PAGE_SILENT_READ;
-		pte.pte_high |= _PAGE_SILENT_READ;
-	}
-	return pte;
-}
-
 static inline pte_t pte_mkdirty(pte_t pte)
 {
 	pte.pte_low |= _PAGE_MODIFIED;
@@ -253,7 +234,6 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	return pte;
 }
 #else
-static inline int pte_read(pte_t pte)	{ return pte_val(pte) & _PAGE_READ; }
 static inline int pte_write(pte_t pte)	{ return pte_val(pte) & _PAGE_WRITE; }
 static inline int pte_dirty(pte_t pte)	{ return pte_val(pte) & _PAGE_MODIFIED; }
 static inline int pte_young(pte_t pte)	{ return pte_val(pte) & _PAGE_ACCESSED; }
@@ -265,12 +245,6 @@ static inline pte_t pte_wrprotect(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_rdprotect(pte_t pte)
-{
-	pte_val(pte) &= ~(_PAGE_READ | _PAGE_SILENT_READ);
-	return pte;
-}
-
 static inline pte_t pte_mkclean(pte_t pte)
 {
 	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
@@ -291,14 +265,6 @@ static inline pte_t pte_mkwrite(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_mkread(pte_t pte)
-{
-	pte_val(pte) |= _PAGE_READ;
-	if (pte_val(pte) & _PAGE_ACCESSED)
-		pte_val(pte) |= _PAGE_SILENT_READ;
-	return pte;
-}
-
 static inline pte_t pte_mkdirty(pte_t pte)
 {
 	pte_val(pte) |= _PAGE_MODIFIED;
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h
new file mode 100644
index 000000000000..c84bcf9570b1
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h
@@ -0,0 +1,151 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_CIC_INT_H
+#define _MSP_CIC_INT_H
+
+/*
+ * The PMC-Sierra CIC interrupts are all centrally managed by the
+ * CIC sub-system.
+ * We attempt to keep the interrupt numbers as consistent as possible
+ * across all of the MSP devices, but some differences will creep in ...
+ * The interrupts which are directly forwarded to the MIPS core interrupts
+ * are assigned interrupts in the range 0-7, interrupts cascaded through
+ * the CIC are assigned interrupts 8-39.  The cascade occurs on C_IRQ4
+ * (MSP_INT_CIC).  Currently we don't really distinguish between VPE1
+ * and VPE0 (or thread contexts for that matter).  Will have to fix.
+ * The PER interrupts are assigned interrupts in the range 40-71.
+*/
+
+
+/*
+ * IRQs directly forwarded to the CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0	/* IRQ for swint0,       C_SW0  */
+#define MSP_INT_SW1		1	/* IRQ for swint1,       C_SW1  */
+#define MSP_INT_MAC0		2	/* IRQ for MAC 0,        C_IRQ0 */
+#define MSP_INT_MAC1		3	/* IRQ for MAC 1,        C_IRQ1 */
+#define MSP_INT_USB		4	/* IRQ for USB,          C_IRQ2 */
+#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,   C_IRQ3 */
+#define MSP_INT_CIC		6	/* IRQ for CIC block,    C_IRQ4 */
+#define MSP_INT_SEC		7	/* IRQ for Sec engine,   C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definitions for the CIC
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_CIC_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_CIC_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_CIC_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_CIC_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_CIC_INTBASE + 3)
+					/* External interrupt 3         */
+#define MSP_INT_CPUIF		(MSP_CIC_INTBASE + 4)
+					/* CPU interface interrupt      */
+#define MSP_INT_EXT4		(MSP_CIC_INTBASE + 5)
+					/* External interrupt 4         */
+#define MSP_INT_CIC_USB		(MSP_CIC_INTBASE + 6)
+					/* Cascaded IRQ for USB         */
+#define MSP_INT_MBOX		(MSP_CIC_INTBASE + 7)
+					/* Sec engine mailbox IRQ       */
+#define MSP_INT_EXT5		(MSP_CIC_INTBASE + 8)
+					/* External interrupt 5         */
+#define MSP_INT_TDM		(MSP_CIC_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_CIC_MAC0	(MSP_CIC_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_CIC_MAC1	(MSP_CIC_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_CIC_SEC		(MSP_CIC_INTBASE + 12)
+					/* Cascaded IRQ for sec engine  */
+#define	MSP_INT_PER		(MSP_CIC_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
+					/* VPE0 MIPS timer              */
+#define MSP_INT_BLKCP		(MSP_CIC_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_CIC_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_CIC_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_EXT6		(MSP_CIC_INTBASE + 21)
+					/* External interrupt 5         */
+#define MSP_INT_PCI_MSI		(MSP_CIC_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_CIC_SAR		(MSP_CIC_INTBASE + 23)
+					/* Cascaded ADSL2+ SAR IRQ      */
+#define MSP_INT_DSL		(MSP_CIC_INTBASE + 24)
+					/* ADSL2+ IRQ                   */
+#define MSP_INT_CIC_ERR		(MSP_CIC_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_VPE1_TIMER	(MSP_CIC_INTBASE + 26)
+					/* VPE1 MIPS timer              */
+#define MSP_INT_VPE0_PC		(MSP_CIC_INTBASE + 27)
+					/* VPE0 Performance counter     */
+#define MSP_INT_VPE1_PC		(MSP_CIC_INTBASE + 28)
+					/* VPE1 Performance counter     */
+#define MSP_INT_EXT7		(MSP_CIC_INTBASE + 29)
+					/* External interrupt 5         */
+#define MSP_INT_VPE0_SW		(MSP_CIC_INTBASE + 30)
+					/* VPE0 Software interrupt      */
+#define MSP_INT_VPE1_SW		(MSP_CIC_INTBASE + 31)
+					/* VPE0 Software interrupt      */
+
+/*
+ * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_CIC_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_CIC_INT_H */
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_int.h
new file mode 100644
index 000000000000..1d9f05474820
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_int.h
@@ -0,0 +1,43 @@
+/*
+ * Defines for the MSP interrupt handlers.
+ *
+ * Copyright (C) 2005, PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_INT_H
+#define _MSP_INT_H
+
+/*
+ * The PMC-Sierra MSP product line has at least two different interrupt
+ * controllers, the SLP register based scheme and the CIC interrupt
+ * controller block mechanism.  This file distinguishes between them
+ * so that devices see a uniform interface.
+ */
+
+#if defined(CONFIG_IRQ_MSP_SLP)
+	#include "msp_slp_int.h"
+#elif defined(CONFIG_IRQ_MSP_CIC)
+	#include "msp_cic_int.h"
+#else
+	#error "What sort of interrupt controller does *your* MSP have?"
+#endif
+
+#endif /* !_MSP_INT_H */
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 000000000000..415606903617
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2000-2006 PMC-Sierra INC.
+ *
+ *     This program is free software; you can redistribute it
+ *     and/or modify it under the terms of the GNU General
+ *     Public License as published by the Free Software
+ *     Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     This program is distributed in the hope that it will be
+ *     useful, but WITHOUT ANY WARRANTY; without even the implied
+ *     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *     PURPOSE.  See the GNU General Public License for more
+ *     details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this program; if not, write to the Free
+ *     Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ *     02139, USA.
+ *
+ * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
+ * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
+ * SOFTWARE.
+ */
+
+#ifndef _MSP_PCI_H_
+#define _MSP_PCI_H_
+
+#define MSP_HAS_PCI(ID)	(((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+
+/*
+ * It is convenient to program the OATRAN register so that
+ * Athena virtual address space and PCI address space are
+ * the same. This is not a requirement, just a convenience.
+ *
+ * The only hard restrictions on the value of OATRAN is that
+ * OATRAN must not be programmed to allow translated memory
+ * addresses to fall within the lowest 512MB of
+ * PCI address space. This region is hardcoded
+ * for use as Athena PCI Host Controller target
+ * access memory space to the Athena's SDRAM.
+ *
+ * Note that OATRAN applies only to memory accesses, not
+ * to I/O accesses.
+ *
+ * To program OATRAN to make Athena virtual address space
+ * and PCI address space have the same values, OATRAN
+ * is to be programmed to 0xB8000000. The top seven
+ * bits of the value mimic the seven bits clipped off
+ * by the PCI Host controller.
+ *
+ * With OATRAN at the said value, when the CPU does
+ * an access to its virtual address at, say 0xB900_5000,
+ * the address appearing on the PCI bus will be
+ * 0xB900_5000.
+ *    - Michael Penner
+ */
+#define MSP_PCI_OATRAN		0xB8000000UL
+
+#define MSP_PCI_SPACE_BASE	(MSP_PCI_OATRAN + 0x1002000UL)
+#define MSP_PCI_SPACE_SIZE	(0x3000000UL - 0x2000)
+#define MSP_PCI_SPACE_END \
+		(MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
+#define MSP_PCI_IOSPACE_BASE	(MSP_PCI_OATRAN + 0x1001000UL)
+#define MSP_PCI_IOSPACE_SIZE	0x1000
+#define MSP_PCI_IOSPACE_END  \
+		(MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
+
+/* IRQ for PCI status interrupts */
+#define PCI_STAT_IRQ	20
+
+#define QFLUSH_REG_1	0xB7F40000
+
+typedef volatile unsigned int pcireg;
+typedef void * volatile ppcireg;
+
+struct pci_block_copy
+{
+    pcireg   unused1; /* +0x00 */
+    pcireg   unused2; /* +0x04 */
+    ppcireg  unused3; /* +0x08 */
+    ppcireg  unused4; /* +0x0C */
+    pcireg   unused5; /* +0x10 */
+    pcireg   unused6; /* +0x14 */
+    pcireg   unused7; /* +0x18 */
+    ppcireg  unused8; /* +0x1C */
+    ppcireg  unused9; /* +0x20 */
+    pcireg   unusedA; /* +0x24 */
+    ppcireg  unusedB; /* +0x28 */
+    ppcireg  unusedC; /* +0x2C */
+};
+
+enum
+{
+    config_device_vendor,  /* 0 */
+    config_status_command, /* 1 */
+    config_class_revision, /* 2 */
+    config_BIST_header_latency_cache, /* 3 */
+    config_BAR0,           /* 4 */
+    config_BAR1,           /* 5 */
+    config_BAR2,           /* 6 */
+    config_not_used7,      /* 7 */
+    config_not_used8,      /* 8 */
+    config_not_used9,      /* 9 */
+    config_CIS,            /* 10 */
+    config_subsystem,      /* 11 */
+    config_not_used12,     /* 12 */
+    config_capabilities,   /* 13 */
+    config_not_used14,     /* 14 */
+    config_lat_grant_irq,  /* 15 */
+    config_message_control,/* 16 */
+    config_message_addr,   /* 17 */
+    config_message_data,   /* 18 */
+    config_VPD_addr,       /* 19 */
+    config_VPD_data,       /* 20 */
+    config_maxregs         /* 21 - number of registers */
+};
+
+struct msp_pci_regs
+{
+    pcireg hop_unused_00; /* +0x00 */
+    pcireg hop_unused_04; /* +0x04 */
+    pcireg hop_unused_08; /* +0x08 */
+    pcireg hop_unused_0C; /* +0x0C */
+    pcireg hop_unused_10; /* +0x10 */
+    pcireg hop_unused_14; /* +0x14 */
+    pcireg hop_unused_18; /* +0x18 */
+    pcireg hop_unused_1C; /* +0x1C */
+    pcireg hop_unused_20; /* +0x20 */
+    pcireg hop_unused_24; /* +0x24 */
+    pcireg hop_unused_28; /* +0x28 */
+    pcireg hop_unused_2C; /* +0x2C */
+    pcireg hop_unused_30; /* +0x30 */
+    pcireg hop_unused_34; /* +0x34 */
+    pcireg if_control;    /* +0x38 */
+    pcireg oatran;        /* +0x3C */
+    pcireg reset_ctl;     /* +0x40 */
+    pcireg config_addr;   /* +0x44 */
+    pcireg hop_unused_48; /* +0x48 */
+    pcireg msg_signaled_int_status; /* +0x4C */
+    pcireg msg_signaled_int_mask;   /* +0x50 */
+    pcireg if_status;     /* +0x54 */
+    pcireg if_mask;       /* +0x58 */
+    pcireg hop_unused_5C; /* +0x5C */
+    pcireg hop_unused_60; /* +0x60 */
+    pcireg hop_unused_64; /* +0x64 */
+    pcireg hop_unused_68; /* +0x68 */
+    pcireg hop_unused_6C; /* +0x6C */
+    pcireg hop_unused_70; /* +0x70 */
+
+    struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
+
+    pcireg error_hdr1; /* +0xE0 */
+    pcireg error_hdr2; /* +0xE4 */
+
+    pcireg config[config_maxregs] __attribute__((aligned(256)));
+
+};
+
+#define BPCI_CFGADDR_BUSNUM_SHF 16
+#define BPCI_CFGADDR_FUNCTNUM_SHF 8
+#define BPCI_CFGADDR_REGNUM_SHF 2
+#define BPCI_CFGADDR_ENABLE (1<<31)
+
+#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
+#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
+#define BPCI_IFCONTROL_CTO_SHF 12  /* Shift count for CTO bits */
+#define BPCI_IFCONTROL_SE  (1<<5)  /* Enable exceptions on errors */
+#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
+#define BPCI_IFCONTROL_CAP (1<<3)  /* Enable capabilities */
+#define BPCI_IFCONTROL_MMC_SHF 0   /* Shift count for MMC bits */
+
+#define BPCI_IFSTATUS_MGT  (1<<8)  /* Master Grant timeout */
+#define BPCI_IFSTATUS_MTT  (1<<9)  /* Master TRDY timeout */
+#define BPCI_IFSTATUS_MRT  (1<<10) /* Master retry timeout */
+#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
+#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
+#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
+#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
+#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
+#define BPCI_IFSTATUS_RTO  (1<<18) /* Retry time out */
+#define BPCI_IFSTATUS_SER  (1<<19) /* System error */
+#define BPCI_IFSTATUS_PER  (1<<20) /* Parity error */
+#define BPCI_IFSTATUS_LCA  (1<<21) /* Local CPU abort */
+#define BPCI_IFSTATUS_MEM  (1<<22) /* Memory prot. violation */
+#define BPCI_IFSTATUS_ARB  (1<<23) /* Arbiter timed out */
+#define BPCI_IFSTATUS_STA  (1<<27) /* Signaled target abort */
+#define BPCI_IFSTATUS_TA   (1<<28) /* Target abort */
+#define BPCI_IFSTATUS_MA   (1<<29) /* Master abort */
+#define BPCI_IFSTATUS_PEI  (1<<30) /* Parity error as initiator */
+#define BPCI_IFSTATUS_PET  (1<<31) /* Parity error as target */
+
+#define BPCI_RESETCTL_PR (1<<0)    /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4)    /* Release time */
+#define BPCI_RESETCTL_CT (1<<8)    /* Config time */
+#define BPCI_RESETCTL_PE (1<<12)   /* PCI enabled */
+#define BPCI_RESETCTL_HM (1<<13)   /* PCI host mode */
+#define BPCI_RESETCTL_RI (1<<14)   /* PCI reset in */
+
+extern struct msp_pci_regs msp_pci_regs
+			__attribute__((section(".register")));
+extern unsigned long msp_pci_config_space
+			__attribute__((section(".register")));
+
+#endif /* !_MSP_PCI_H_ */
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h b/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h
new file mode 100644
index 000000000000..14ca7dc382a8
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h
@@ -0,0 +1,176 @@
+/*
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _ASM_MSP_PROM_H
+#define _ASM_MSP_PROM_H
+
+#include <linux/types.h>
+
+#define DEVICEID			"deviceid"
+#define FEATURES			"features"
+#define PROM_ENV			"prom_env"
+#define PROM_ENV_FILE			"/proc/"PROM_ENV
+#define PROM_ENV_SIZE			256
+
+#define CPU_DEVID_FAMILY		0x0000ff00
+#define CPU_DEVID_REVISION		0x000000ff
+
+#define FPGA_IS_POLO(revision) \
+		(((revision >= 0xb0) && (revision < 0xd0)))
+#define FPGA_IS_5000(revision) \
+		((revision >= 0x80) && (revision <= 0x90))
+#define	FPGA_IS_ZEUS(revision)		((revision < 0x7f))
+#define FPGA_IS_DUET(revision) \
+		(((revision >= 0xa0) && (revision < 0xb0)))
+#define FPGA_IS_MSP4200(revision)	((revision >= 0xd0))
+#define FPGA_IS_MSP7100(revision)	((revision >= 0xd0))
+
+#define MACHINE_TYPE_POLO		"POLO"
+#define MACHINE_TYPE_DUET		"DUET"
+#define	MACHINE_TYPE_ZEUS		"ZEUS"
+#define MACHINE_TYPE_MSP2000REVB	"MSP2000REVB"
+#define MACHINE_TYPE_MSP5000		"MSP5000"
+#define MACHINE_TYPE_MSP4200		"MSP4200"
+#define MACHINE_TYPE_MSP7120		"MSP7120"
+#define MACHINE_TYPE_MSP7130		"MSP7130"
+#define MACHINE_TYPE_OTHER		"OTHER"
+
+#define MACHINE_TYPE_POLO_FPGA		"POLO-FPGA"
+#define MACHINE_TYPE_DUET_FPGA		"DUET-FPGA"
+#define	MACHINE_TYPE_ZEUS_FPGA		"ZEUS_FPGA"
+#define MACHINE_TYPE_MSP2000REVB_FPGA	"MSP2000REVB-FPGA"
+#define MACHINE_TYPE_MSP5000_FPGA	"MSP5000-FPGA"
+#define MACHINE_TYPE_MSP4200_FPGA	"MSP4200-FPGA"
+#define MACHINE_TYPE_MSP7100_FPGA	"MSP7100-FPGA"
+#define MACHINE_TYPE_OTHER_FPGA		"OTHER-FPGA"
+
+/* Device Family definitions */
+#define FAMILY_FPGA			0x0000
+#define FAMILY_ZEUS			0x1000
+#define FAMILY_POLO			0x2000
+#define FAMILY_DUET			0x4000
+#define FAMILY_TRIAD			0x5000
+#define FAMILY_MSP4200			0x4200
+#define FAMILY_MSP4200_FPGA		0x4f00
+#define FAMILY_MSP7100			0x7100
+#define FAMILY_MSP7100_FPGA		0x7f00
+
+/* Device Type definitions */
+#define TYPE_MSP7120			0x7120
+#define TYPE_MSP7130			0x7130
+
+#define ENET_KEY		'E'
+#define ENETTXD_KEY		'e'
+#define PCI_KEY			'P'
+#define PCIMUX_KEY		'p'
+#define SEC_KEY			'S'
+#define SPAD_KEY		'D'
+#define TDM_KEY			'T'
+#define ZSP_KEY			'Z'
+
+#define FEATURE_NOEXIST		'-'
+#define FEATURE_EXIST		'+'
+
+#define ENET_MII		'M'
+#define ENET_RMII		'R'
+
+#define	ENETTXD_FALLING		'F'
+#define ENETTXD_RISING		'R'
+
+#define PCI_HOST		'H'
+#define PCI_PERIPHERAL		'P'
+
+#define PCIMUX_FULL		'F'
+#define PCIMUX_SINGLE		'S'
+
+#define SEC_DUET		'D'
+#define SEC_POLO		'P'
+#define SEC_SLOW		'S'
+#define SEC_TRIAD		'T'
+
+#define SPAD_POLO		'P'
+
+#define TDM_DUET		'D'	/* DUET TDMs might exist */
+#define TDM_POLO		'P'	/* POLO TDMs might exist */
+#define TDM_TRIAD		'T'	/* TRIAD TDMs might exist */
+
+#define ZSP_DUET		'D'	/* one DUET zsp engine */
+#define ZSP_TRIAD		'T'	/* two TRIAD zsp engines */
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem,
+			       unsigned long end_mem);
+
+#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
+extern bool get_ramroot(void **start, unsigned long *size);
+#endif
+
+extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
+extern unsigned long get_deviceid(void);
+extern char identify_enet(unsigned long interface_num);
+extern char identify_enetTxD(unsigned long interface_num);
+extern char identify_pci(void);
+extern char identify_sec(void);
+extern char identify_spad(void);
+extern char identify_sec(void);
+extern char identify_tdm(void);
+extern char identify_zsp(void);
+extern unsigned long identify_family(void);
+extern unsigned long identify_revision(void);
+
+/*
+ * The following macro calls prom_printf and puts the format string
+ * into an init section so it can be reclaimed.
+ */
+#define ppfinit(f, x...) \
+	do { \
+		static char _f[] __initdata = KERN_INFO f; \
+		printk(_f, ## x); \
+	} while (0)
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    7	/* 6 used */
+
+enum yamon_memtypes {
+	yamon_dontuse,
+	yamon_prom,
+	yamon_free,
+};
+
+struct prom_pmemblock {
+	unsigned long base; /* Within KSEG0. */
+	unsigned int size;  /* In bytes. */
+	unsigned int type;  /* free or prom memory */
+};
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+extern int *prom_vec;
+extern struct prom_pmemblock *prom_getmdesc(void);
+
+#endif /* !_ASM_MSP_PROM_H */
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h
new file mode 100644
index 000000000000..60a5a38dd5b2
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h
@@ -0,0 +1,236 @@
+/*
+ * SMP/VPE-safe functions to access "registers" (see note).
+ *
+ * NOTES:
+* - These macros use ll/sc instructions, so it is your responsibility to
+ * ensure these are available on your platform before including this file.
+ * - The MIPS32 spec states that ll/sc results are undefined for uncached
+ * accesses. This means they can't be used on HW registers accessed
+ * through kseg1. Code which requires these macros for this purpose must
+ * front-end the registers with cached memory "registers" and have a single
+ * thread update the actual HW registers.
+ * - A maximum of 2k of code can be inserted between ll and sc. Every
+ * memory accesses between the instructions will increase the chance of
+ * sc failing and having to loop.
+ * - When using custom_read_reg32/custom_write_reg32 only perform the
+ * necessary logical operations on the register value in between these
+ * two calls. All other logic should be performed before the first call.
+  * - There is a bug on the R10000 chips which has a workaround. If you
+ * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
+ * to be non-zero.  If you are using this header from within linux, you may
+ * include <asm/war.h> before including this file to have this defined
+ * appropriately for you.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+ *  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF USE,
+ *  DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc., 675
+ *  Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_REGOPS_H__
+#define __ASM_REGOPS_H__
+
+#include <linux/types.h>
+
+#include <asm/war.h>
+
+#ifndef R10000_LLSC_WAR
+#define R10000_LLSC_WAR 0
+#endif
+
+#if R10000_LLSC_WAR == 1
+#define __beqz	"beqzl	"
+#else
+#define __beqz	"beqz	"
+#endif
+
+#ifndef _LINUX_TYPES_H
+typedef unsigned int u32;
+#endif
+
+/*
+ * Sets all the masked bits to the corresponding value bits
+ */
+static inline void set_value_reg32(volatile u32 *const addr,
+					u32 const mask,
+					u32 const value)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1	# set_value_reg32	\n"
+	"	and	%0, %2				\n"
+	"	or	%0, %3				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "ir" (value), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '1'
+ */
+static inline void set_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# set_reg32	\n"
+	"	or	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '0'
+ */
+static inline void clear_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# clear_reg32	\n"
+	"	and	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "m" (*addr));
+}
+
+/*
+ * Toggles all masked bits from '0' to '1' and '1' to '0'
+ */
+static inline void toggle_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# toggle_reg32	\n"
+	"	xor	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Read all masked bits others are returned as '0'
+ */
+static inline u32 read_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	and	%0, %2		# mask		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr), "ir" (mask));
+
+	return temp;
+}
+
+/*
+ * blocking_read_reg32 - Read address with blocking load
+ *
+ * Uncached writes need to be read back to ensure they reach RAM.
+ * The returned value must be 'used' to prevent from becoming a
+ * non-blocking load.
+ */
+static inline u32 blocking_read_reg32(volatile u32 *const addr)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	move	%0, %0		# block		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr));
+
+	return temp;
+}
+
+/*
+ * For special strange cases only:
+ *
+ * If you need custom processing within a ll/sc loop, use the following macros
+ * VERY CAREFULLY:
+ *
+ *   u32 tmp;				<-- Define a variable to hold the data
+ *
+ *   custom_read_reg32(address, tmp);	<-- Reads the address and put the value
+ *						in the 'tmp' variable given
+ *
+ *	From here on out, you are (basicly) atomic, so don't do anything too
+ *	fancy!
+ *	Also, this code may loop if the end of this block fails to write
+ *	everything back safely due do the other CPU, so do NOT do anything
+ *	with side-effects!
+ *
+ *   custom_write_reg32(address, tmp);	<-- Writes back 'tmp' safely.
+ */
+#define custom_read_reg32(address, tmp)				\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"1:	ll	%0, %1	#custom_read_reg32	\n"	\
+	"	.set	pop				\n"	\
+	: "=r" (tmp), "=m" (*address)				\
+	: "m" (*address))
+
+#define custom_write_reg32(address, tmp)			\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"	sc	%0, %1	#custom_write_reg32	\n"	\
+	"	"__beqz"%0, 1b				\n"	\
+	"	nop					\n"	\
+	"	.set	pop				\n"	\
+	: "=&r" (tmp), "=m" (*address)				\
+	: "0" (tmp), "m" (*address))
+
+#endif  /* __ASM_REGOPS_H__ */
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h
new file mode 100644
index 000000000000..0b56f55206c6
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h
@@ -0,0 +1,667 @@
+/*
+ * Defines for the address space, registers and register configuration
+ * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
+ * This file contains addess maps for all the devices in the line of
+ * products but only has register definitions and configuration masks for
+ * registers which aren't definitely associated with any device.  Things
+ * like clock settings, reset access, the ELB etc.  Individual device
+ * drivers will reference the appropriate XXX_BASE value defined here
+ * and have individual registers offset from that.
+ *
+ * Copyright (C) 2005-2007 PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <asm/addrspace.h>
+#include <linux/types.h>
+
+#ifndef _ASM_MSP_REGS_H
+#define _ASM_MSP_REGS_H
+
+/*
+ ########################################################################
+ #  Address space and device base definitions                           #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (ELB, UART0, etc) device address space     *
+ ***************************************************************************
+ */
+#define MSP_SLP_BASE		0x1c000000
+					/* System Logic and Peripherals */
+#define MSP_RST_BASE		(MSP_SLP_BASE + 0x10)
+					/* System reset register base	*/
+#define MSP_RST_SIZE		0x0C	/* System reset register space	*/
+
+#define MSP_WTIMER_BASE		(MSP_SLP_BASE + 0x04C)
+					/* watchdog timer base          */
+#define MSP_ITIMER_BASE		(MSP_SLP_BASE + 0x054)
+					/* internal timer base          */
+#define MSP_UART0_BASE		(MSP_SLP_BASE + 0x100)
+					/* UART0 controller base        */
+#define MSP_BCPY_CTRL_BASE	(MSP_SLP_BASE + 0x120)
+					/* Block Copy controller base   */
+#define MSP_BCPY_DESC_BASE	(MSP_SLP_BASE + 0x160)
+					/* Block Copy descriptor base   */
+
+/*
+ ***************************************************************************
+ * PCI address space                                                       *
+ ***************************************************************************
+ */
+#define MSP_PCI_BASE		0x19000000
+
+/*
+ ***************************************************************************
+ * MSbus device address space                                              *
+ ***************************************************************************
+ */
+#define MSP_MSB_BASE		0x18000000
+					/* MSbus address start          */
+#define MSP_PER_BASE		(MSP_MSB_BASE + 0x400000)
+					/* Peripheral device registers  */
+#define MSP_MAC0_BASE		(MSP_MSB_BASE + 0x600000)
+					/* MAC A device registers       */
+#define MSP_MAC1_BASE		(MSP_MSB_BASE + 0x700000)
+					/* MAC B device registers       */
+#define MSP_MAC_SIZE		0xE0	/* MAC register space		*/
+
+#define MSP_SEC_BASE		(MSP_MSB_BASE + 0x800000)
+					/* Security Engine registers    */
+#define MSP_MAC2_BASE		(MSP_MSB_BASE + 0x900000)
+					/* MAC C device registers       */
+#define MSP_ADSL2_BASE		(MSP_MSB_BASE + 0xA80000)
+					/* ADSL2 device registers       */
+#define MSP_USB_BASE		(MSP_MSB_BASE + 0xB40000)
+					/* USB device registers         */
+#define MSP_USB_BASE_START	(MSP_MSB_BASE + 0xB40100)
+					/* USB device registers         */
+#define MSP_USB_BASE_END	(MSP_MSB_BASE + 0xB401FF)
+					/* USB device registers         */
+#define MSP_CPUIF_BASE		(MSP_MSB_BASE + 0xC00000)
+					/* CPU interface registers      */
+
+/* Devices within the MSbus peripheral block */
+#define MSP_UART1_BASE		(MSP_PER_BASE + 0x030)
+					/* UART1 controller base        */
+#define MSP_SPI_BASE		(MSP_PER_BASE + 0x058)
+					/* SPI/MPI control registers    */
+#define MSP_TWI_BASE		(MSP_PER_BASE + 0x090)
+					/* Two-wire control registers   */
+#define MSP_PTIMER_BASE		(MSP_PER_BASE + 0x0F0)
+					/* Programmable timer control   */
+
+/*
+ ***************************************************************************
+ * Physical Memory configuration address space                             *
+ ***************************************************************************
+ */
+#define MSP_MEM_CFG_BASE	0x17f00000
+
+#define MSP_MEM_INDIRECT_CTL_10	0x10
+
+/*
+ * Notes:
+ *  1) The SPI registers are split into two blocks, one offset from the
+ *     MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
+ *     0x68.  The SPI driver definitions for the register must be aware
+ *     of this.
+ *  2) The block copy engine register are divided into two regions, one
+ *     for the control/configuration of the engine proper and one for the
+ *     values of the descriptors used in the copy process.  These have
+ *     different base defines (CTRL_BASE vs DESC_BASE)
+ *  3) These constants are for physical addresses which means that they
+ *     work correctly with "ioremap" and friends.  This means that device
+ *     drivers will need to remap these addresses using ioremap and perhaps
+ *     the readw/writew macros.  Or they could use the regptr() macro
+ *     defined below, but the readw/writew calls are the correct thing.
+ *  4) The UARTs have an additional status register offset from the base
+ *     address.  This register isn't used in the standard 8250 driver but
+ *     may be used in other software.  Consult the hardware datasheet for
+ *     offset details.
+ *  5) For some unknown reason the security engine (MSP_SEC_BASE) registers
+ *     start at an offset of 0x84 from the base address but the block of
+ *     registers before this is reserved for the security engine.  The
+ *     driver will have to be aware of this but it makes the register
+ *     definitions line up better with the documentation.
+ */
+
+/*
+ ########################################################################
+ #  System register definitions.  Not associated with a specific device #
+ ########################################################################
+ */
+
+/*
+ * This macro maps the physical register number into uncached space
+ * and (for C code) casts it into a u32 pointer so it can be dereferenced
+ * Normally these would be accessed with ioremap and readX/writeX, but
+ * these are convenient for a lot of internal kernel code.
+ */
+#ifdef __ASSEMBLER__
+	#define regptr(addr) (KSEG1ADDR(addr))
+#else
+	#define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
+#endif
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (RESET, ELB, etc) registers                *
+ ***************************************************************************
+ */
+
+/* System Control register definitions */
+#define	DEV_ID_REG	regptr(MSP_SLP_BASE + 0x00)
+					/* Device-ID                 RO */
+#define	FWR_ID_REG	regptr(MSP_SLP_BASE + 0x04)
+					/* Firmware-ID Register      RW */
+#define	SYS_ID_REG0	regptr(MSP_SLP_BASE + 0x08)
+					/* System-ID Register-0      RW */
+#define	SYS_ID_REG1	regptr(MSP_SLP_BASE + 0x0C)
+					/* System-ID Register-1      RW */
+
+/* System Reset register definitions */
+#define	RST_STS_REG	regptr(MSP_SLP_BASE + 0x10)
+					/* System Reset Status       RO */
+#define	RST_SET_REG	regptr(MSP_SLP_BASE + 0x14)
+					/* System Set Reset          WO */
+#define	RST_CLR_REG	regptr(MSP_SLP_BASE + 0x18)
+					/* System Clear Reset        WO */
+
+/* System Clock Registers */
+#define PCI_SLP_REG	regptr(MSP_SLP_BASE + 0x1C)
+					/* PCI clock generator       RW */
+#define URT_SLP_REG	regptr(MSP_SLP_BASE + 0x20)
+					/* UART clock generator      RW */
+/* reserved		      (MSP_SLP_BASE + 0x24)                     */
+/* reserved		      (MSP_SLP_BASE + 0x28)                     */
+#define PLL1_SLP_REG	regptr(MSP_SLP_BASE + 0x2C)
+					/* PLL1 clock generator      RW */
+#define PLL0_SLP_REG	regptr(MSP_SLP_BASE + 0x30)
+					/* PLL0 clock generator      RW */
+#define MIPS_SLP_REG	regptr(MSP_SLP_BASE + 0x34)
+					/* MIPS clock generator      RW */
+#define	VE_SLP_REG	regptr(MSP_SLP_BASE + 0x38)
+					/* Voice Eng clock generator RW */
+/* reserved		      (MSP_SLP_BASE + 0x3C)                     */
+#define MSB_SLP_REG	regptr(MSP_SLP_BASE + 0x40)
+					/* MS-Bus clock generator    RW */
+#define SMAC_SLP_REG	regptr(MSP_SLP_BASE + 0x44)
+					/* Sec & MAC clock generator RW */
+#define PERF_SLP_REG	regptr(MSP_SLP_BASE + 0x48)
+					/* Per & TDM clock generator RW */
+
+/* Interrupt Controller Registers */
+#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
+					/* Interrupt status register RW */
+#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
+					/* Interrupt enable/mask     RW */
+#define SE_MBOX_REG	regptr(MSP_SLP_BASE + 0x78)
+					/* Security Engine mailbox   RW */
+#define VE_MBOX_REG	regptr(MSP_SLP_BASE + 0x7C)
+					/* Voice Engine mailbox      RW */
+
+/* ELB Controller Registers */
+#define CS0_CNFG_REG	regptr(MSP_SLP_BASE + 0x80)
+					/* ELB CS0 Configuration Reg    */
+#define CS0_ADDR_REG	regptr(MSP_SLP_BASE + 0x84)
+					/* ELB CS0 Base Address Reg     */
+#define CS0_MASK_REG	regptr(MSP_SLP_BASE + 0x88)
+					/* ELB CS0 Mask Register        */
+#define CS0_ACCESS_REG	regptr(MSP_SLP_BASE + 0x8C)
+					/* ELB CS0 access register      */
+
+#define CS1_CNFG_REG	regptr(MSP_SLP_BASE + 0x90)
+					/* ELB CS1 Configuration Reg    */
+#define CS1_ADDR_REG	regptr(MSP_SLP_BASE + 0x94)
+					/* ELB CS1 Base Address Reg     */
+#define CS1_MASK_REG	regptr(MSP_SLP_BASE + 0x98)
+					/* ELB CS1 Mask Register        */
+#define CS1_ACCESS_REG	regptr(MSP_SLP_BASE + 0x9C)
+					/* ELB CS1 access register      */
+
+#define CS2_CNFG_REG	regptr(MSP_SLP_BASE + 0xA0)
+					/* ELB CS2 Configuration Reg    */
+#define CS2_ADDR_REG	regptr(MSP_SLP_BASE + 0xA4)
+					/* ELB CS2 Base Address Reg     */
+#define CS2_MASK_REG	regptr(MSP_SLP_BASE + 0xA8)
+					/* ELB CS2 Mask Register        */
+#define CS2_ACCESS_REG	regptr(MSP_SLP_BASE + 0xAC)
+					/* ELB CS2 access register      */
+
+#define CS3_CNFG_REG	regptr(MSP_SLP_BASE + 0xB0)
+					/* ELB CS3 Configuration Reg    */
+#define CS3_ADDR_REG	regptr(MSP_SLP_BASE + 0xB4)
+					/* ELB CS3 Base Address Reg     */
+#define CS3_MASK_REG	regptr(MSP_SLP_BASE + 0xB8)
+					/* ELB CS3 Mask Register        */
+#define CS3_ACCESS_REG	regptr(MSP_SLP_BASE + 0xBC)
+					/* ELB CS3 access register      */
+
+#define CS4_CNFG_REG	regptr(MSP_SLP_BASE + 0xC0)
+					/* ELB CS4 Configuration Reg    */
+#define CS4_ADDR_REG	regptr(MSP_SLP_BASE + 0xC4)
+					/* ELB CS4 Base Address Reg     */
+#define CS4_MASK_REG	regptr(MSP_SLP_BASE + 0xC8)
+					/* ELB CS4 Mask Register        */
+#define CS4_ACCESS_REG	regptr(MSP_SLP_BASE + 0xCC)
+					/* ELB CS4 access register      */
+
+#define CS5_CNFG_REG	regptr(MSP_SLP_BASE + 0xD0)
+					/* ELB CS5 Configuration Reg    */
+#define CS5_ADDR_REG	regptr(MSP_SLP_BASE + 0xD4)
+					/* ELB CS5 Base Address Reg     */
+#define CS5_MASK_REG	regptr(MSP_SLP_BASE + 0xD8)
+					/* ELB CS5 Mask Register        */
+#define CS5_ACCESS_REG	regptr(MSP_SLP_BASE + 0xDC)
+					/* ELB CS5 access register      */
+
+/* reserved			       0xE0 - 0xE8                      */
+#define ELB_1PC_EN_REG	regptr(MSP_SLP_BASE + 0xEC)
+					/* ELB single PC card detect    */
+
+/* reserved			       0xF0 - 0xF8                      */
+#define ELB_CLK_CFG_REG	regptr(MSP_SLP_BASE + 0xFC)
+					/* SDRAM read/ELB timing Reg    */
+
+/* Extended UART status registers */
+#define UART0_STATUS_REG	regptr(MSP_UART0_BASE + 0x0c0)
+					/* UART Status Register 0       */
+#define UART1_STATUS_REG	regptr(MSP_UART1_BASE + 0x170)
+					/* UART Status Register 1       */
+
+/* Performance monitoring registers */
+#define PERF_MON_CTRL_REG	regptr(MSP_SLP_BASE + 0x140)
+					/* Performance monitor control  */
+#define PERF_MON_CLR_REG	regptr(MSP_SLP_BASE + 0x144)
+					/* Performance monitor clear    */
+#define PERF_MON_CNTH_REG	regptr(MSP_SLP_BASE + 0x148)
+					/* Perf monitor counter high    */
+#define PERF_MON_CNTL_REG	regptr(MSP_SLP_BASE + 0x14C)
+					/* Perf monitor counter low     */
+
+/* System control registers */
+#define SYS_CTRL_REG		regptr(MSP_SLP_BASE + 0x150)
+					/* System control register      */
+#define SYS_ERR1_REG		regptr(MSP_SLP_BASE + 0x154)
+					/* System Error status 1        */
+#define SYS_ERR2_REG		regptr(MSP_SLP_BASE + 0x158)
+					/* System Error status 2        */
+#define SYS_INT_CFG_REG		regptr(MSP_SLP_BASE + 0x15C)
+					/* System Interrupt config      */
+
+/* Voice Engine Memory configuration */
+#define VE_MEM_REG		regptr(MSP_SLP_BASE + 0x17C)
+					/* Voice engine memory config   */
+
+/* CPU/SLP Error Status registers */
+#define CPU_ERR1_REG		regptr(MSP_SLP_BASE + 0x180)
+					/* CPU/SLP Error status 1       */
+#define CPU_ERR2_REG		regptr(MSP_SLP_BASE + 0x184)
+					/* CPU/SLP Error status 1       */
+
+#define EXTENDED_GPIO_REG	regptr(MSP_SLP_BASE + 0x188)
+					/* Extended GPIO register       */
+
+/* System Error registers */
+#define SLP_ERR_STS_REG		regptr(MSP_SLP_BASE + 0x190)
+					/* Int status for SLP errors    */
+#define SLP_ERR_MSK_REG		regptr(MSP_SLP_BASE + 0x194)
+					/* Int mask for SLP errors      */
+#define SLP_ELB_ERST_REG	regptr(MSP_SLP_BASE + 0x198)
+					/* External ELB reset           */
+#define SLP_BOOT_STS_REG	regptr(MSP_SLP_BASE + 0x19C)
+					/* Boot Status                  */
+
+/* Extended ELB addressing */
+#define CS0_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A0)
+					/* CS0 Extended address         */
+#define CS1_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A4)
+					/* CS1 Extended address         */
+#define CS2_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A8)
+					/* CS2 Extended address         */
+#define CS3_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1AC)
+					/* CS3 Extended address         */
+/* reserved					      0x1B0             */
+#define CS5_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1B4)
+					/* CS5 Extended address         */
+
+/* PLL Adjustment registers */
+#define PLL_LOCK_REG		regptr(MSP_SLP_BASE + 0x200)
+					/* PLL0 lock status             */
+#define PLL_ARST_REG		regptr(MSP_SLP_BASE + 0x204)
+					/* PLL Analog reset status      */
+#define PLL0_ADJ_REG		regptr(MSP_SLP_BASE + 0x208)
+					/* PLL0 Adjustment value        */
+#define PLL1_ADJ_REG		regptr(MSP_SLP_BASE + 0x20C)
+					/* PLL1 Adjustment value        */
+
+/*
+ ***************************************************************************
+ * Peripheral Register definitions                                         *
+ ***************************************************************************
+ */
+
+/* Peripheral status */
+#define PER_CTRL_REG		regptr(MSP_PER_BASE + 0x50)
+					/* Peripheral control register  */
+#define PER_STS_REG		regptr(MSP_PER_BASE + 0x54)
+					/* Peripheral status register   */
+
+/* SPI/MPI Registers */
+#define SMPI_TX_SZ_REG		regptr(MSP_PER_BASE + 0x58)
+					/* SPI/MPI Tx Size register     */
+#define SMPI_RX_SZ_REG		regptr(MSP_PER_BASE + 0x5C)
+					/* SPI/MPI Rx Size register     */
+#define SMPI_CTL_REG		regptr(MSP_PER_BASE + 0x60)
+					/* SPI/MPI Control register     */
+#define SMPI_MS_REG		regptr(MSP_PER_BASE + 0x64)
+					/* SPI/MPI Chip Select reg      */
+#define SMPI_CORE_DATA_REG	regptr(MSP_PER_BASE + 0xC0)
+					/* SPI/MPI Core Data reg        */
+#define SMPI_CORE_CTRL_REG	regptr(MSP_PER_BASE + 0xC4)
+					/* SPI/MPI Core Control reg     */
+#define SMPI_CORE_STAT_REG	regptr(MSP_PER_BASE + 0xC8)
+					/* SPI/MPI Core Status reg      */
+#define SMPI_CORE_SSEL_REG	regptr(MSP_PER_BASE + 0xCC)
+					/* SPI/MPI Core Ssel reg        */
+#define SMPI_FIFO_REG		regptr(MSP_PER_BASE + 0xD0)
+					/* SPI/MPI Data FIFO reg        */
+
+/* Peripheral Block Error Registers           */
+#define PER_ERR_STS_REG		regptr(MSP_PER_BASE + 0x70)
+					/* Error Bit Status Register    */
+#define PER_ERR_MSK_REG		regptr(MSP_PER_BASE + 0x74)
+					/* Error Bit Mask Register      */
+#define PER_HDR1_REG		regptr(MSP_PER_BASE + 0x78)
+					/* Error Header 1 Register      */
+#define PER_HDR2_REG		regptr(MSP_PER_BASE + 0x7C)
+					/* Error Header 2 Register      */
+
+/* Peripheral Block Interrupt Registers       */
+#define PER_INT_STS_REG		regptr(MSP_PER_BASE + 0x80)
+					/* Interrupt status register    */
+#define PER_INT_MSK_REG		regptr(MSP_PER_BASE + 0x84)
+					/* Interrupt Mask Register      */
+#define GPIO_INT_STS_REG	regptr(MSP_PER_BASE + 0x88)
+					/* GPIO interrupt status reg    */
+#define GPIO_INT_MSK_REG	regptr(MSP_PER_BASE + 0x8C)
+					/* GPIO interrupt MASK Reg      */
+
+/* POLO GPIO registers                        */
+#define POLO_GPIO_DAT1_REG	regptr(MSP_PER_BASE + 0x0E0)
+					/* Polo GPIO[8:0]  data reg     */
+#define POLO_GPIO_CFG1_REG	regptr(MSP_PER_BASE + 0x0E4)
+					/* Polo GPIO[7:0]  config reg   */
+#define POLO_GPIO_CFG2_REG	regptr(MSP_PER_BASE + 0x0E8)
+					/* Polo GPIO[15:8] config reg   */
+#define POLO_GPIO_OD1_REG	regptr(MSP_PER_BASE + 0x0EC)
+					/* Polo GPIO[31:0] output drive */
+#define POLO_GPIO_CFG3_REG	regptr(MSP_PER_BASE + 0x170)
+					/* Polo GPIO[23:16] config reg  */
+#define POLO_GPIO_DAT2_REG	regptr(MSP_PER_BASE + 0x174)
+					/* Polo GPIO[15:9]  data reg    */
+#define POLO_GPIO_DAT3_REG	regptr(MSP_PER_BASE + 0x178)
+					/* Polo GPIO[23:16]  data reg   */
+#define POLO_GPIO_DAT4_REG	regptr(MSP_PER_BASE + 0x17C)
+					/* Polo GPIO[31:24]  data reg   */
+#define POLO_GPIO_DAT5_REG	regptr(MSP_PER_BASE + 0x180)
+					/* Polo GPIO[39:32]  data reg   */
+#define POLO_GPIO_DAT6_REG	regptr(MSP_PER_BASE + 0x184)
+					/* Polo GPIO[47:40]  data reg   */
+#define POLO_GPIO_DAT7_REG	regptr(MSP_PER_BASE + 0x188)
+					/* Polo GPIO[54:48]  data reg   */
+#define POLO_GPIO_CFG4_REG	regptr(MSP_PER_BASE + 0x18C)
+					/* Polo GPIO[31:24] config reg  */
+#define POLO_GPIO_CFG5_REG	regptr(MSP_PER_BASE + 0x190)
+					/* Polo GPIO[39:32] config reg  */
+#define POLO_GPIO_CFG6_REG	regptr(MSP_PER_BASE + 0x194)
+					/* Polo GPIO[47:40] config reg  */
+#define POLO_GPIO_CFG7_REG	regptr(MSP_PER_BASE + 0x198)
+					/* Polo GPIO[54:48] config reg  */
+#define POLO_GPIO_OD2_REG	regptr(MSP_PER_BASE + 0x19C)
+					/* Polo GPIO[54:32] output drive */
+
+/* Generic GPIO registers                     */
+#define GPIO_DATA1_REG		regptr(MSP_PER_BASE + 0x170)
+					/* GPIO[1:0] data register      */
+#define GPIO_DATA2_REG		regptr(MSP_PER_BASE + 0x174)
+					/* GPIO[5:2] data register      */
+#define GPIO_DATA3_REG		regptr(MSP_PER_BASE + 0x178)
+					/* GPIO[9:6] data register      */
+#define GPIO_DATA4_REG		regptr(MSP_PER_BASE + 0x17C)
+					/* GPIO[15:10] data register    */
+#define GPIO_CFG1_REG		regptr(MSP_PER_BASE + 0x180)
+					/* GPIO[1:0] config register    */
+#define GPIO_CFG2_REG		regptr(MSP_PER_BASE + 0x184)
+					/* GPIO[5:2] config register    */
+#define GPIO_CFG3_REG		regptr(MSP_PER_BASE + 0x188)
+					/* GPIO[9:6] config register    */
+#define GPIO_CFG4_REG		regptr(MSP_PER_BASE + 0x18C)
+					/* GPIO[15:10] config register  */
+#define GPIO_OD_REG		regptr(MSP_PER_BASE + 0x190)
+					/* GPIO[15:0] output drive      */
+
+/*
+ ***************************************************************************
+ * CPU Interface register definitions                                      *
+ ***************************************************************************
+ */
+#define PCI_FLUSH_REG		regptr(MSP_CPUIF_BASE + 0x00)
+					/* PCI-SDRAM queue flush trigger */
+#define OCP_ERR1_REG		regptr(MSP_CPUIF_BASE + 0x04)
+					/* OCP Error Attribute 1        */
+#define OCP_ERR2_REG		regptr(MSP_CPUIF_BASE + 0x08)
+					/* OCP Error Attribute 2        */
+#define OCP_STS_REG		regptr(MSP_CPUIF_BASE + 0x0C)
+					/* OCP Error Status             */
+#define CPUIF_PM_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* CPU policy configuration     */
+#define CPUIF_CFG_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* Misc configuration options   */
+
+/* Central Interrupt Controller Registers */
+#define MSP_CIC_BASE		(MSP_CPUIF_BASE + 0x8000)
+					/* Central Interrupt registers  */
+#define CIC_EXT_CFG_REG		regptr(MSP_CIC_BASE + 0x00)
+					/* External interrupt config    */
+#define CIC_STS_REG		regptr(MSP_CIC_BASE + 0x04)
+					/* CIC Interrupt Status         */
+#define CIC_VPE0_MSK_REG	regptr(MSP_CIC_BASE + 0x08)
+					/* VPE0 Interrupt Mask          */
+#define CIC_VPE1_MSK_REG	regptr(MSP_CIC_BASE + 0x0C)
+					/* VPE1 Interrupt Mask          */
+#define CIC_TC0_MSK_REG		regptr(MSP_CIC_BASE + 0x10)
+					/* Thread Context 0 Int Mask    */
+#define CIC_TC1_MSK_REG		regptr(MSP_CIC_BASE + 0x14)
+					/* Thread Context 1 Int Mask    */
+#define CIC_TC2_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 2 Int Mask    */
+#define CIC_TC3_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 3 Int Mask    */
+#define CIC_TC4_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 4 Int Mask    */
+#define CIC_PCIMSI_STS_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIMSI_MSK_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIFLSH_REG		regptr(MSP_CIC_BASE + 0x18)
+#define CIC_VPE0_SWINT_REG	regptr(MSP_CIC_BASE + 0x08)
+
+
+/*
+ ***************************************************************************
+ * Memory controller registers                                             *
+ ***************************************************************************
+ */
+#define MEM_CFG1_REG		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_ADDR		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_DATA		regptr(MSP_MEM_CFG_BASE + 0x04)
+#define MEM_SS_WRITE		regptr(MSP_MEM_CFG_BASE + 0x08)
+
+/*
+ ***************************************************************************
+ * PCI controller registers                                                *
+ ***************************************************************************
+ */
+#define PCI_BASE_REG		regptr(MSP_PCI_BASE + 0x00)
+#define PCI_CONFIG_SPACE_REG	regptr(MSP_PCI_BASE + 0x800)
+#define PCI_JTAG_DEVID_REG	regptr(MSP_SLP_BASE + 0x13c)
+
+/*
+ ########################################################################
+ #  Register content & macro definitions                                #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * DEV_ID defines                                                          *
+ ***************************************************************************
+ */
+#define DEV_ID_PCI_DIS		(1 << 26)       /* Set if PCI disabled */
+#define DEV_ID_PCI_HOST		(1 << 20)       /* Set if PCI host */
+#define DEV_ID_SINGLE_PC	(1 << 19)       /* Set if single PC Card */
+#define DEV_ID_FAMILY		(0xff << 8)     /* family ID code */
+#define POLO_ZEUS_SUB_FAMILY	(0x7  << 16)    /* sub family for Polo/Zeus */
+
+#define MSPFPGA_ID		(0x00  << 8)    /* you are on your own here */
+#define MSP5000_ID		(0x50  << 8)
+#define MSP4F00_ID		(0x4f  << 8)    /* FPGA version of MSP4200 */
+#define MSP4E00_ID		(0x4f  << 8)    /* FPGA version of MSP7120 */
+#define MSP4200_ID		(0x42  << 8)
+#define MSP4000_ID		(0x40  << 8)
+#define MSP2XXX_ID		(0x20  << 8)
+#define MSPZEUS_ID		(0x10  << 8)
+
+#define MSP2004_SUB_ID		(0x0   << 16)
+#define MSP2005_SUB_ID		(0x1   << 16)
+#define MSP2006_SUB_ID		(0x1   << 16)
+#define MSP2007_SUB_ID		(0x2   << 16)
+#define MSP2010_SUB_ID		(0x3   << 16)
+#define MSP2015_SUB_ID		(0x4   << 16)
+#define MSP2020_SUB_ID		(0x5   << 16)
+#define MSP2100_SUB_ID		(0x6   << 16)
+
+/*
+ ***************************************************************************
+ * RESET defines                                                           *
+ ***************************************************************************
+ */
+#define MSP_GR_RST		(0x01 << 0)     /* Global reset bit     */
+#define MSP_MR_RST		(0x01 << 1)     /* MIPS reset bit       */
+#define MSP_PD_RST		(0x01 << 2)     /* PVC DMA reset bit    */
+#define MSP_PP_RST		(0x01 << 3)     /* PVC reset bit        */
+/* reserved                                                             */
+#define MSP_EA_RST		(0x01 << 6)     /* Mac A reset bit      */
+#define MSP_EB_RST		(0x01 << 7)     /* Mac B reset bit      */
+#define MSP_SE_RST		(0x01 << 8)     /* Security Eng reset bit */
+#define MSP_PB_RST		(0x01 << 9)     /* Per block reset bit  */
+#define MSP_EC_RST		(0x01 << 10)    /* Mac C reset bit      */
+#define MSP_TW_RST		(0x01 << 11)    /* TWI reset bit        */
+#define MSP_SPI_RST		(0x01 << 12)    /* SPI/MPI reset bit    */
+#define MSP_U1_RST		(0x01 << 13)    /* UART1 reset bit      */
+#define MSP_U0_RST		(0x01 << 14)    /* UART0 reset bit      */
+
+/*
+ ***************************************************************************
+ * UART defines                                                            *
+ ***************************************************************************
+ */
+#ifndef CONFIG_MSP_FPGA
+#define MSP_BASE_BAUD		25000000
+#else
+#define MSP_BASE_BAUD		6000000
+#endif
+#define MSP_UART_REG_LEN	0x20
+
+/*
+ ***************************************************************************
+ * ELB defines                                                             *
+ ***************************************************************************
+ */
+#define PCCARD_32		0x02    /* Set if is PCCARD 32 (Cardbus) */
+#define SINGLE_PCCARD		0x01    /* Set to enable single PC card */
+
+/*
+ ***************************************************************************
+ * CIC defines                                                             *
+ ***************************************************************************
+ */
+
+/* CIC_EXT_CFG_REG */
+#define EXT_INT_POL(eirq)			(1 << (eirq + 8))
+#define EXT_INT_EDGE(eirq)			(1 << eirq)
+
+#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq)	(reg &= ~EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq)	(reg |= EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_ACTIVE_HI(reg, eirq)	(reg |= EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_LO(reg, eirq)	(reg &= ~EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_RISING		CIC_EXT_SET_ACTIVE_HI
+#define CIC_EXT_SET_ACTIVE_FALLING		CIC_EXT_SET_ACTIVE_LO
+
+#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
+				((reg & EXT_INT_EDGE(eirq)) == 0)
+#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq)	(reg & EXT_INT_EDGE(eirq))
+#define CIC_EXT_IS_ACTIVE_HI(reg, eirq)		(reg & EXT_INT_POL(eirq))
+#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
+				((reg & EXT_INT_POL(eirq)) == 0)
+#define CIC_EXT_IS_ACTIVE_RISING		CIC_EXT_IS_ACTIVE_HI
+#define CIC_EXT_IS_ACTIVE_FALLING		CIC_EXT_IS_ACTIVE_LO
+
+/*
+ ***************************************************************************
+ * Memory Controller defines                                               *
+ ***************************************************************************
+ */
+
+/* Indirect memory controller registers */
+#define DDRC_CFG(n)		(n)
+#define DDRC_DEBUG(n)		(0x04 + n)
+#define DDRC_CTL(n)		(0x40 + n)
+
+/* Macro to perform DDRC indirect write */
+#define DDRC_INDIRECT_WRITE(reg, mask, value) \
+({ \
+	*MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
+	*MEM_SS_DATA = (value); \
+	*MEM_SS_WRITE = 1; \
+})
+
+/*
+ ***************************************************************************
+ * SPI/MPI Mode                                                            *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_BUSY		0x00008000	/* SPI/MPI Receive Busy */
+#define SPI_MPI_FIFO_EMPTY	0x00004000	/* SPI/MPI Fifo Empty   */
+#define SPI_MPI_TX_BUSY		0x00002000	/* SPI/MPI Transmit Busy */
+#define SPI_MPI_FIFO_FULL	0x00001000	/* SPI/MPU FIFO full    */
+
+/*
+ ***************************************************************************
+ * SPI/MPI Control Register                                                *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_START	0x00000004	/* Start receive command */
+#define SPI_MPI_FLUSH_Q		0x00000002	/* Flush SPI/MPI Queue */
+#define SPI_MPI_TX_START	0x00000001	/* Start Transmit Command */
+
+#endif /* !_ASM_MSP_REGS_H */
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h
new file mode 100644
index 000000000000..96d4c8ce8c83
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h
@@ -0,0 +1,141 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_SLP_INT_H
+#define _MSP_SLP_INT_H
+
+/*
+ * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
+ * hierarchical system.  The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7.  The second level is the SLM
+ * interrupt controller and is assigned the range 8-39.  The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP.  The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block.  These are assigned interrupts in
+ * the range 40-71.
+ */
+
+/*
+ * IRQs directly connected to CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0  /* IRQ for swint0,         C_SW0  */
+#define MSP_INT_SW1		1  /* IRQ for swint1,         C_SW1  */
+#define MSP_INT_MAC0 		2  /* IRQ for MAC 0,          C_IRQ0 */
+#define MSP_INT_MAC1		3  /* IRQ for MAC 1,          C_IRQ1 */
+#define MSP_INT_C_IRQ2		4  /* Wired off,              C_IRQ2 */
+#define MSP_INT_VE		5  /* IRQ for Voice Engine,   C_IRQ3 */
+#define MSP_INT_SLP		6  /* IRQ for SLM block,      C_IRQ4 */
+#define MSP_INT_TIMER		7  /* IRQ for the MIPS timer, C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definition for the SLM
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_SLP_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_SLP_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_SLP_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_SLP_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_SLP_INTBASE + 3)
+					/* External interrupt 3         */
+/* Reserved					   4-7                  */
+
+/*
+ *************************************************************************
+ * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
+ * Some MSP produces have this interrupt labelled as Voice and some are  *
+ * SEC mbox ...                                                          *
+ *************************************************************************
+ */
+#define MSP_INT_SLP_VE		(MSP_SLP_INTBASE + 8)
+					/* Cascaded IRQ for Voice Engine*/
+#define MSP_INT_SLP_TDM		(MSP_SLP_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_SLP_MAC0	(MSP_SLP_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_SLP_MAC1	(MSP_SLP_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_SEC		(MSP_SLP_INTBASE + 12)
+					/* IRQ for security engine      */
+#define	MSP_INT_PER		(MSP_SLP_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_SLP_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_SLP_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_SLP_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_SLP_TIMER	(MSP_SLP_INTBASE + 17)
+					/* Cascaded MIPS timer          */
+#define MSP_INT_BLKCP		(MSP_SLP_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_SLP_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_SLP_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_PCI_DBELL	(MSP_SLP_INTBASE + 21)
+					/* PCI doorbell                 */
+#define MSP_INT_PCI_MSI		(MSP_SLP_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_PCI_BC0		(MSP_SLP_INTBASE + 23)
+					/* PCI Block Copy 0             */
+#define MSP_INT_PCI_BC1		(MSP_SLP_INTBASE + 24)
+					/* PCI Block Copy 1             */
+#define MSP_INT_SLP_ERR		(MSP_SLP_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_MAC2		(MSP_SLP_INTBASE + 26)
+					/* IRQ for MAC2                 */
+/* Reserved					   26-31                */
+
+/*
+ * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_SLP_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_SLP_INT_H */
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 5f80ba71ab92..1d8b9a8ae324 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -82,10 +82,6 @@ struct mips_fpu_struct {
 	unsigned int	fcr31;
 };
 
-#define INIT_FPU { \
-	{0,} \
-}
-
 #define NUM_DSP_REGS   6
 
 typedef __u32 dspreg_t;
@@ -95,8 +91,6 @@ struct mips_dsp_state {
 	unsigned int    dspcontrol;
 };
 
-#define INIT_DSP {{0,},}
-
 #define INIT_CPUMASK { \
 	{0,} \
 }
@@ -155,41 +149,63 @@ struct thread_struct {
 #define MF_N64		0
 
 #ifdef CONFIG_MIPS_MT_FPAFF
-#define FPAFF_INIT 0, INIT_CPUMASK,
+#define FPAFF_INIT						\
+	.emulated_fp			= 0,			\
+	.user_cpus_allowed		= INIT_CPUMASK,
 #else
 #define FPAFF_INIT
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
-#define INIT_THREAD  { \
-        /* \
-         * saved main processor registers \
-         */ \
-	0, 0, 0, 0, 0, 0, 0, 0, \
-	               0, 0, 0, \
-	/* \
-	 * saved cp0 stuff \
-	 */ \
-	0, \
-	/* \
-	 * saved fpu/fpu emulator stuff \
-	 */ \
-	INIT_FPU, \
-	/* \
-	 * fpu affinity state (null if not FPAFF) \
-	 */ \
-	FPAFF_INIT \
-	/* \
-	 * saved dsp/dsp emulator stuff \
-	 */ \
-	INIT_DSP, \
-	/* \
-	 * Other stuff associated with the process \
-	 */ \
-	0, 0, 0, 0, \
-	/* \
-	 * For now the default is to fix address errors \
-	 */ \
-	MF_FIXADE, 0, 0 \
+#define INIT_THREAD  {						\
+        /*							\
+         * Saved main processor registers			\
+         */							\
+	.reg16			= 0,				\
+	.reg17			= 0,				\
+	.reg18			= 0,				\
+	.reg19			= 0,				\
+	.reg20			= 0,				\
+	.reg21			= 0,				\
+	.reg22			= 0,				\
+	.reg23			= 0,				\
+	.reg29			= 0,				\
+	.reg30			= 0,				\
+	.reg31			= 0,				\
+	/*							\
+	 * Saved cp0 stuff					\
+	 */							\
+	.cp0_status		= 0,				\
+	/*							\
+	 * Saved FPU/FPU emulator stuff				\
+	 */							\
+	.fpu			= {				\
+		.fpr		= {0,},				\
+		.fcr31		= 0,				\
+	},							\
+	/*							\
+	 * FPU affinity state (null if not FPAFF)		\
+	 */							\
+	FPAFF_INIT						\
+	/*							\
+	 * Saved DSP stuff					\
+	 */							\
+	.dsp			= {				\
+		.dspr		= {0, },			\
+		.dspcontrol	= 0,				\
+	},							\
+	/*							\
+	 * Other stuff associated with the process		\
+	 */							\
+	.cp0_badvaddr		= 0,				\
+	.cp0_baduaddr		= 0,				\
+	.error_code		= 0,				\
+	.trap_no		= 0,				\
+	/*							\
+	 * For now the default is to fix address errors		\
+	 */							\
+	.mflags			= MF_FIXADE,			\
+	.irix_trampoline	= 0,				\
+	.irix_oldctx		= 0,				\
 }
 
 struct task_struct;
@@ -237,7 +253,7 @@ unsigned long get_wchan(struct task_struct *p);
 
 #define ARCH_HAS_PREFETCH
 
-extern inline void prefetch(const void *addr)
+static inline void prefetch(const void *addr)
 {
 	__asm__ __volatile__(
 	"	.set	mips4		\n"
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 1906938285c0..85b44366343a 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -86,7 +86,7 @@ struct pt_regs {
 
 extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
 
-extern NORET_TYPE void die(const char *, struct pt_regs *);
+extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
 
 static inline void die_if_kernel(const char *str, struct pt_regs *regs)
 {
diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h
deleted file mode 100644
index 82ad401c7dca..000000000000
--- a/include/asm-mips/rtc.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-mips/rtc.h
- *
- * (Really an interface for drivers/char/genrtc.c)
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Please read the COPYING file for all license details.
- */
-
-#ifndef _MIPS_RTC_H
-#define _MIPS_RTC_H
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40            /* periodic interrupt enable */
-#define RTC_AIE 0x20            /* alarm interrupt enable */
-#define RTC_UIE 0x10            /* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100      /* battery bad */
-#define RTC_SQWE 0x08           /* enable square-wave output */
-#define RTC_DM_BINARY 0x04      /* all time/date values are BCD if clear */
-#define RTC_24H 0x02            /* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01         /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
-	unsigned long nowtime;
-
-	nowtime = rtc_mips_get_time();
-	to_tm(nowtime, time);
-	time->tm_year -= 1900;
-
-	return RTC_24H;
-}
-
-static inline int set_rtc_time(struct rtc_time *time)
-{
-	unsigned long nowtime;
-	int ret;
-
-	nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
-			time->tm_mday, time->tm_hour, time->tm_min,
-			time->tm_sec);
-	ret = rtc_mips_set_time(nowtime);
-
-	return ret;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-#endif
-#endif
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index ce51213d84f9..c07ebd8eb9e7 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -19,159 +19,4 @@
  */
 #define BASE_BAUD (1843200 / 16)
 
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#ifdef CONFIG_MACH_JAZZ
-#include <asm/jazz.h>
-
-#ifndef CONFIG_OLIVETTI_M700
-   /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
-      exactly which ones ... XXX */
-#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */
-#else
-/* but the M700 isn't such a strange beast */
-#define JAZZ_BASE_BAUD BASE_BAUD
-#endif
-
-#define _JAZZ_SERIAL_INIT(int, base)					\
-	{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
-	  .iomem_base = (u8 *) base, .iomem_reg_shift = 0,			\
-	  .io_type = SERIAL_IO_MEM }
-#define JAZZ_SERIAL_PORT_DEFNS						\
-	_JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE),		\
-	_JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE),
-#else
-#define JAZZ_SERIAL_PORT_DEFNS
-#endif
-
-/*
- * Galileo EV64120 evaluation board
- */
-#ifdef CONFIG_MIPS_EV64120
-#include <mach-gt64120.h>
-#define EV64120_SERIAL_PORT_DEFNS                                  \
-    { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
-      .flags = STD_COM_FLAGS,  \
-      .iomem_base = EV64120_UART0_REGS_BASE, .iomem_reg_shift = 2, \
-      .io_type = SERIAL_IO_MEM }, \
-    { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
-      .flags = STD_COM_FLAGS, \
-      .iomem_base = EV64120_UART1_REGS_BASE, .iomem_reg_shift = 2, \
-      .io_type = SERIAL_IO_MEM },
-#else
-#define EV64120_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
-#define STD_SERIAL_PORT_DEFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
-#define STD_SERIAL_PORT_DEFNS
-#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
-
-#ifdef CONFIG_MOMENCO_OCELOT_3
-#define OCELOT_3_BASE_BAUD	( 20000000 / 16 )
-#define OCELOT_3_SERIAL_IRQ	6
-#define OCELOT_3_SERIAL_BASE	(signed)0xfd000020
-
-#define _OCELOT_3_SERIAL_INIT(int, base)				\
-	{ .baud_base = OCELOT_3_BASE_BAUD, irq: int, 			\
-	  .flags = STD_COM_FLAGS,						\
-	  .iomem_base = (u8 *) base, iomem_reg_shift: 2,			\
-	  io_type: SERIAL_IO_MEM }
-
-#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS				\
-	_OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE)
-#else
-#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MOMENCO_OCELOT
-/* Ordinary NS16552 duart with a 20MHz crystal.  */
-#define OCELOT_BASE_BAUD ( 20000000 / 16 )
-
-#define OCELOT_SERIAL1_IRQ	4
-#define OCELOT_SERIAL1_BASE	0xe0001020
-
-#define _OCELOT_SERIAL_INIT(int, base)					\
-	{ .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
-	  .iomem_base = (u8 *) base, .iomem_reg_shift = 2,			\
-	  .io_type = SERIAL_IO_MEM }
-#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS				\
-	_OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE)
-#else
-#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MOMENCO_OCELOT_C
-/* Ordinary NS16552 duart with a 20MHz crystal.  */
-#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
-
-#define OCELOT_C_SERIAL1_IRQ	80
-#define OCELOT_C_SERIAL1_BASE	0xfd000020
-
-#define OCELOT_C_SERIAL2_IRQ	81
-#define OCELOT_C_SERIAL2_BASE	0xfd000000
-
-#define _OCELOT_C_SERIAL_INIT(int, base)				\
-	{ .baud_base		= OCELOT_C_BASE_BAUD,			\
-	  .irq			= (int),				\
-	  .flags		= STD_COM_FLAGS,			\
-	  .iomem_base		= (u8 *) base,				\
-	  .iomem_reg_shift	= 2,					\
-	  .io_type		= SERIAL_IO_MEM				\
-	 }
-#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS				\
-	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \
-	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE)
-#else
-#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_DDB5477
-#include <asm/ddb5xxx/ddb5477.h>
-#define DDB5477_SERIAL_PORT_DEFNS                                       \
-        { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, 		\
-	  .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, 	\
-	  .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},		\
-        { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, 		\
-	  .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, 	\
-	  .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},
-#else
-#define DDB5477_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_SGI_IP32
-/*
- * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory
- * They are initialized in ip32_setup
- */
-#define IP32_SERIAL_PORT_DEFNS				\
-        {},{},
-#else
-#define IP32_SERIAL_PORT_DEFNS
-#endif /* CONFIG_SGI_IP32 */
-
-#define SERIAL_PORT_DFNS				\
-	DDB5477_SERIAL_PORT_DEFNS			\
-	EV64120_SERIAL_PORT_DEFNS			\
-	IP32_SERIAL_PORT_DEFNS                          \
-	JAZZ_SERIAL_PORT_DEFNS				\
-	STD_SERIAL_PORT_DEFNS				\
-	MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS		\
-	MOMENCO_OCELOT_SERIAL_PORT_DEFNS		\
-	MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
-
 #endif /* _ASM_SERIAL_H */
diff --git a/include/asm-mips/sibyte/bcm1480_regs.h b/include/asm-mips/sibyte/bcm1480_regs.h
index bda391d3af85..2738c1366f66 100644
--- a/include/asm-mips/sibyte/bcm1480_regs.h
+++ b/include/asm-mips/sibyte/bcm1480_regs.h
@@ -220,17 +220,25 @@
 #define A_BCM1480_DUART(chan)               ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
 
 #define BCM1480_DUART_CHANREG_SPACING       0x100
-#define A_BCM1480_DUART_CHANREG(chan,reg)   (A_BCM1480_DUART(chan) \
-                                     + BCM1480_DUART_CHANREG_SPACING*((chan)&1) \
-                                     + (reg))
-#define R_BCM1480_DUART_CHANREG(chan,reg)   (BCM1480_DUART_CHANREG_SPACING*((chan)&1) + (reg))
-
-#define R_BCM1480_DUART_IMRREG(chan)	    (R_DUART_IMR_A + ((chan)&1)*DUART_IMRISR_SPACING)
-#define R_BCM1480_DUART_ISRREG(chan)	    (R_DUART_ISR_A + ((chan)&1)*DUART_IMRISR_SPACING)
-
-#define A_BCM1480_DUART_IMRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
-#define A_BCM1480_DUART_ISRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
-#define A_BCM1480_DUART_IN_PORT(chan)       (A_BCM1480_DUART(chan) + R_DUART_INP_ORT)
+#define A_BCM1480_DUART_CHANREG(chan, reg)				\
+	(A_BCM1480_DUART(chan) +					\
+	 BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
+#define A_BCM1480_DUART_CTRLREG(chan, reg)				\
+	(A_BCM1480_DUART(chan) +					\
+	 BCM1480_DUART_CHANREG_SPACING * 3 + (reg))
+
+#define R_BCM1480_DUART_IMRREG(chan)					\
+	(R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan)					\
+	(R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan)))
+#define A_BCM1480_DUART_ISRREG(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan)))
+
+#define A_BCM1480_DUART_IN_PORT(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT))
 
 /*
  * These constants are the absolute addresses.
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
index da7c188993c9..220b7e94f1bf 100644
--- a/include/asm-mips/sibyte/sb1250_regs.h
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -272,59 +272,69 @@
     ********************************************************************* */
 
 
-#if SIBYTE_HDR_FEATURE_1250_112x		/* This MC only on 1250 & 112x */
+#if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
 #define R_DUART_NUM_PORTS           2
 
 #define A_DUART                     0x0010060000
 
 #define DUART_CHANREG_SPACING       0x100
-#define A_DUART_CHANREG(chan,reg)   (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
-#define R_DUART_CHANREG(chan,reg)   (DUART_CHANREG_SPACING*(chan) + (reg))
+
+#define A_DUART_CHANREG(chan, reg)					\
+	(A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg))
 #endif	/* 1250 & 112x */
 
-#define R_DUART_MODE_REG_1	    0x100
-#define R_DUART_MODE_REG_2	    0x110
-#define R_DUART_STATUS              0x120
-#define R_DUART_CLK_SEL             0x130
-#define R_DUART_CMD                 0x150
-#define R_DUART_RX_HOLD             0x160
-#define R_DUART_TX_HOLD             0x170
+#define R_DUART_MODE_REG_1	    0x000
+#define R_DUART_MODE_REG_2	    0x010
+#define R_DUART_STATUS		    0x020
+#define R_DUART_CLK_SEL		    0x030
+#define R_DUART_CMD		    0x050
+#define R_DUART_RX_HOLD		    0x060
+#define R_DUART_TX_HOLD		    0x070
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define R_DUART_FULL_CTL	    0x140
-#define R_DUART_OPCR_X		    0x180
-#define R_DUART_AUXCTL_X	    0x190
-#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
+#define R_DUART_FULL_CTL	    0x040
+#define R_DUART_OPCR_X		    0x080
+#define R_DUART_AUXCTL_X	    0x090
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 
 /*
  * The IMR and ISR can't be addressed with A_DUART_CHANREG,
- * so use this macro instead.
+ * so use these macros instead.
  */
 
-#define R_DUART_AUX_CTRL            0x310
-#define R_DUART_ISR_A               0x320
-#define R_DUART_IMR_A               0x330
-#define R_DUART_ISR_B               0x340
-#define R_DUART_IMR_B               0x350
-#define R_DUART_OUT_PORT            0x360
-#define R_DUART_OPCR                0x370
-#define R_DUART_IN_PORT             0x380
+#if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
+#define DUART_IMRISR_SPACING	    0x20
+#define DUART_INCHNG_SPACING	    0x10
 
-#define R_DUART_SET_OPR		    0x3B0
-#define R_DUART_CLEAR_OPR	    0x3C0
+#define A_DUART_CTRLREG(reg)						\
+	(A_DUART + DUART_CHANREG_SPACING * 3 + (reg))
 
-#define DUART_IMRISR_SPACING        0x20
+#define R_DUART_IMRREG(chan)						\
+	(R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_ISRREG(chan)						\
+	(R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_INCHREG(chan)						\
+	(R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING)
 
-#if SIBYTE_HDR_FEATURE_1250_112x		/* This MC only on 1250 & 112x */
-#define R_DUART_IMRREG(chan)	    (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
-#define R_DUART_ISRREG(chan)	    (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
-
-#define A_DUART_IMRREG(chan)	    (A_DUART + R_DUART_IMRREG(chan))
-#define A_DUART_ISRREG(chan)	    (A_DUART + R_DUART_ISRREG(chan))
+#define A_DUART_IMRREG(chan)	    A_DUART_CTRLREG(R_DUART_IMRREG(chan))
+#define A_DUART_ISRREG(chan)	    A_DUART_CTRLREG(R_DUART_ISRREG(chan))
+#define A_DUART_INCHREG(chan)	    A_DUART_CTRLREG(R_DUART_INCHREG(chan))
 #endif	/* 1250 & 112x */
 
-
+#define R_DUART_AUX_CTRL	    0x010
+#define R_DUART_ISR_A		    0x020
+#define R_DUART_IMR_A		    0x030
+#define R_DUART_ISR_B		    0x040
+#define R_DUART_IMR_B		    0x050
+#define R_DUART_OUT_PORT	    0x060
+#define R_DUART_OPCR		    0x070
+#define R_DUART_IN_PORT		    0x080
+
+#define R_DUART_SET_OPR		    0x0B0
+#define R_DUART_CLEAR_OPR	    0x0C0
+#define R_DUART_IN_CHNG_A	    0x0D0
+#define R_DUART_IN_CHNG_B	    0x0E0
 
 
 /*
diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h
index e87045e62bf0..cf74fedcbef1 100644
--- a/include/asm-mips/sibyte/sb1250_uart.h
+++ b/include/asm-mips/sibyte/sb1250_uart.h
@@ -75,7 +75,8 @@
 #define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
 #define V_DUART_PARITY_MODE_NONE      V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
 
-#define M_DUART_ERR_MODE            _SB_MAKEMASK1(5)    /* must be zero */
+#define M_DUART_TX_IRQ_SEL_TXRDY    0
+#define M_DUART_TX_IRQ_SEL_TXEMPT   _SB_MAKEMASK1(5)
 
 #define M_DUART_RX_IRQ_SEL_RXRDY    0
 #define M_DUART_RX_IRQ_SEL_RXFULL   _SB_MAKEMASK1(6)
@@ -246,10 +247,13 @@
 
 #define M_DUART_ISR_BRK_A           _SB_MAKEMASK1(2)
 #define M_DUART_ISR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL_A	    _SB_MAKEMASK(4,0)
+
 #define M_DUART_ISR_TX_B            _SB_MAKEMASK1(4)
 #define M_DUART_ISR_RX_B            _SB_MAKEMASK1(5)
 #define M_DUART_ISR_BRK_B           _SB_MAKEMASK1(6)
 #define M_DUART_ISR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_ISR_ALL_B	    _SB_MAKEMASK(4,4)
 
 /*
  * DUART Channel A Interrupt Status Register (Table 10-17)
@@ -262,6 +266,7 @@
 #define M_DUART_ISR_RX              _SB_MAKEMASK1(1)
 #define M_DUART_ISR_BRK             _SB_MAKEMASK1(2)
 #define M_DUART_ISR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL		    _SB_MAKEMASK(4,0)
 #define M_DUART_ISR_RESERVED        _SB_MAKEMASK(4,4)
 
 /*
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
index 1608fd71d6f7..13aef6af422c 100644
--- a/include/asm-mips/smp.h
+++ b/include/asm-mips/smp.h
@@ -49,13 +49,6 @@ extern struct call_data_struct *call_data;
 extern cpumask_t phys_cpu_present_map;
 #define cpu_possible_map	phys_cpu_present_map
 
-extern cpumask_t cpu_callout_map;
-/* We don't mark CPUs online until __cpu_up(), so we need another measure */
-static inline int num_booting_cpus(void)
-{
-	return cpus_weight(cpu_callout_map);
-}
-
 /*
  * These are defined by the board-specific code.
  */
diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h
index f257509b914f..ddaf36a1e389 100644
--- a/include/asm-mips/sni.h
+++ b/include/asm-mips/sni.h
@@ -146,9 +146,6 @@ extern unsigned int sni_brd_type;
 #define SNI_A20R_IRQ_BASE       MIPS_CPU_IRQ_BASE
 #define SNI_A20R_IRQ_TIMER      (SNI_A20R_IRQ_BASE+5)
 
-#define SNI_DS1216_A20R_BASE    0xbc081ffc
-#define SNI_DS1216_RM200_BASE   0xbcd41ffc
-
 #define SNI_PCIT_INT_REG        0xbfff000c
 
 #define SNI_PCIT_INT_START      24
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index bb0b289dbc9e..46bdb3f566f9 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -44,7 +44,7 @@ struct task_struct;
  * different thread.
  */
 
-#define switch_to(prev,next,last)					\
+#define __mips_mt_fpaff_switch_to(prev)					\
 do {									\
 	if (cpu_has_fpu &&						\
 	    (prev->thread.mflags & MF_FPUBOUND) &&			\
@@ -52,24 +52,24 @@ do {									\
 		prev->thread.mflags &= ~MF_FPUBOUND;			\
 		prev->cpus_allowed = prev->thread.user_cpus_allowed;	\
 	}								\
-	if (cpu_has_dsp)						\
-		__save_dsp(prev);					\
 	next->thread.emulated_fp = 0;					\
-	(last) = resume(prev, next, task_thread_info(next));		\
-	if (cpu_has_dsp)						\
-		__restore_dsp(current);					\
 } while(0)
 
 #else
+#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
+#endif
+
 #define switch_to(prev,next,last)					\
 do {									\
+	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
 	(last) = resume(prev, next, task_thread_info(next));		\
 	if (cpu_has_dsp)						\
 		__restore_dsp(current);					\
+	if (cpu_has_userlocal)						\
+		write_c0_userlocal(task_thread_info(current)->tp_value);\
 } while(0)
-#endif
 
 /*
  * On SMP systems, when the scheduler does migration-cost autodetection,
diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h
index 0bbe07b42a07..5bfdc3b64510 100644
--- a/include/asm-mips/termbits.h
+++ b/include/asm-mips/termbits.h
@@ -30,6 +30,17 @@ struct termios {
 	cc_t c_cc[NCCS];		/* control characters */
 };
 
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
 struct ktermios {
 	tcflag_t c_iflag;		/* input mode flags */
 	tcflag_t c_oflag;		/* output mode flags */
diff --git a/include/asm-mips/tlbdebug.h b/include/asm-mips/tlbdebug.h
index fff7a73e22d0..bb8f5c29c3d9 100644
--- a/include/asm-mips/tlbdebug.h
+++ b/include/asm-mips/tlbdebug.h
@@ -11,10 +11,6 @@
 /*
  * TLB debugging functions:
  */
-extern void dump_tlb(int first, int last);
 extern void dump_tlb_all(void);
-extern void dump_tlb_wired(void);
-extern void dump_tlb_addr(unsigned long addr);
-extern void dump_tlb_nonwired(void);
 
 #endif /* __ASM_TLBDEBUG_H */
diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/tx4938/rbtx4938.h
index 0fbedafdcea8..74e7d8061e58 100644
--- a/include/asm-mips/tx4938/rbtx4938.h
+++ b/include/asm-mips/tx4938/rbtx4938.h
@@ -105,12 +105,6 @@
 #define rbtx4938_pcireset_ptr	\
 	((volatile unsigned char *)RBTX4938_PCIRESET_ADDR)
 
-/* SPI */
-#define RBTX4938_SEEPROM1_CHIPID	0
-#define RBTX4938_SEEPROM2_CHIPID	1
-#define RBTX4938_SEEPROM3_CHIPID	2
-#define RBTX4938_SRTC_CHIPID	3
-
 /*
  * IRQ mappings
  */
diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/tx4938/spi.h
index 0dbbab820a5a..6a60c83e152b 100644
--- a/include/asm-mips/tx4938/spi.h
+++ b/include/asm-mips/tx4938/spi.h
@@ -14,61 +14,7 @@
 #ifndef __ASM_TX_BOARDS_TX4938_SPI_H
 #define __ASM_TX_BOARDS_TX4938_SPI_H
 
-/* SPI */
-struct spi_dev_desc {
-	unsigned int baud;
-	unsigned short tcss, tcsh, tcsr; /* CS setup/hold/recovery time */
-	unsigned int byteorder:1;	/* 0:LSB-First, 1:MSB-First */
-	unsigned int polarity:1;	/* 0:High-Active */
-	unsigned int phase:1;		/* 0:Sample-Then-Shift */
-};
-
-extern void txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on)) __init;
-extern void txx9_spi_irqinit(int irc_irq) __init;
-extern int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
-		       unsigned char **inbufs, unsigned int *incounts,
-		       unsigned char **outbufs, unsigned int *outcounts,
-		       int cansleep);
-extern int spi_eeprom_write_enable(int chipid, int enable);
-extern int spi_eeprom_read_status(int chipid);
+extern int spi_eeprom_register(int chipid);
 extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
-extern int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len);
-extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid) __init;
-
-#define TXX9_IMCLK     (txx9_gbus_clock / 2)
-
-/*
-* SPI
-*/
-
-/* SPMCR : SPI Master Control */
-#define TXx9_SPMCR_OPMODE	0xc0
-#define TXx9_SPMCR_CONFIG	0x40
-#define TXx9_SPMCR_ACTIVE	0x80
-#define TXx9_SPMCR_SPSTP	0x02
-#define TXx9_SPMCR_BCLR	0x01
-
-/* SPCR0 : SPI Status */
-#define TXx9_SPCR0_TXIFL_MASK	0xc000
-#define TXx9_SPCR0_RXIFL_MASK	0x3000
-#define TXx9_SPCR0_SIDIE	0x0800
-#define TXx9_SPCR0_SOEIE	0x0400
-#define TXx9_SPCR0_RBSIE	0x0200
-#define TXx9_SPCR0_TBSIE	0x0100
-#define TXx9_SPCR0_IFSPSE	0x0010
-#define TXx9_SPCR0_SBOS	0x0004
-#define TXx9_SPCR0_SPHA	0x0002
-#define TXx9_SPCR0_SPOL	0x0001
-
-/* SPSR : SPI Status */
-#define TXx9_SPSR_TBSI	0x8000
-#define TXx9_SPSR_RBSI	0x4000
-#define TXx9_SPSR_TBS_MASK	0x3800
-#define TXx9_SPSR_RBS_MASK	0x0700
-#define TXx9_SPSR_SPOE	0x0080
-#define TXx9_SPSR_IFSD	0x0008
-#define TXx9_SPSR_SIDLE	0x0004
-#define TXx9_SPSR_STRDY	0x0002
-#define TXx9_SPSR_SRRDY	0x0001
 
 #endif /* __ASM_TX_BOARDS_TX4938_SPI_H */
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 59d6fec8fbff..ed16de0a6398 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -977,6 +977,22 @@
 #  define __ARCH_WANT_COMPAT_SYS_TIME
 # endif
 
+/* whitelists for checksyscalls */
+#define __IGNORE_select
+#define __IGNORE_vfork
+#define __IGNORE_time
+#define __IGNORE_uselib
+#define __IGNORE_fadvise64_64
+#define __IGNORE_getdents64
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+#define __IGNORE_truncate64
+#define __IGNORE_ftruncate64
+#define __IGNORE_stat64
+#define __IGNORE_lstat64
+#define __IGNORE_fstat64
+#define __IGNORE_fstatat64
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 /*
diff --git a/include/asm-mips/vr41xx/giu.h b/include/asm-mips/vr41xx/giu.h
index 8109cda557dc..0bcdd3a5c256 100644
--- a/include/asm-mips/vr41xx/giu.h
+++ b/include/asm-mips/vr41xx/giu.h
@@ -20,6 +20,15 @@
 #ifndef __NEC_VR41XX_GIU_H
 #define __NEC_VR41XX_GIU_H
 
+/*
+ * NEC VR4100 series GIU platform device IDs.
+ */
+enum {
+	GPIO_50PINS_PULLUPDOWN,
+	GPIO_36PINS,
+	GPIO_48PINS_EDGE_SELECT,
+};
+
 typedef enum {
 	IRQ_TRIGGER_LEVEL,
 	IRQ_TRIGGER_EDGE,
diff --git a/include/asm-mips/vr41xx/siu.h b/include/asm-mips/vr41xx/siu.h
index 1fcf6e8082b4..98cdb4096485 100644
--- a/include/asm-mips/vr41xx/siu.h
+++ b/include/asm-mips/vr41xx/siu.h
@@ -20,6 +20,8 @@
 #ifndef __NEC_VR41XX_SIU_H
 #define __NEC_VR41XX_SIU_H
 
+#define SIU_PORTS_MAX 2
+
 typedef enum {
 	SIU_INTERFACE_RS232C,
 	SIU_INTERFACE_IRDA,
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index 13a3502eef44..9de52a5b0f3d 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -169,26 +169,28 @@
 
 /*
  * On the RM9000 there is a problem which makes the CreateDirtyExclusive
- * cache operation unusable on SMP systems.
+ * eache operation unusable on SMP systems.
  */
-#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE) || \
-    defined(CONFIG_BASLER_EXCITE)
+#if defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_BASLER_EXCITE)
 #define  RM9000_CDEX_SMP_WAR		1
 #endif
 
 /*
- * The RM9000 has a bug (though PMC-Sierra opposes it being called that)
- * where invalid instructions in the same I-cache line worth of instructions
- * being fetched may case spurious exceptions.
+ * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
+ * opposes it being called that) where invalid instructions in the same
+ * I-cache line worth of instructions being fetched may case spurious
+ * exceptions.
  */
-#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_MOMENCO_OCELOT_3) || \
-    defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_BASLER_EXCITE)
+#if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \
+    defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MOMENCO_OCELOT) || \
+    defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_SGI_IP32) || \
+    defined(CONFIG_WR_PPMC)
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #endif
 
 
 /*
- * ON the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
+ * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
  * may cause ll / sc and lld / scd sequences to execute non-atomically.
  */
 #ifdef CONFIG_SGI_IP27
@@ -196,6 +198,14 @@
 #endif
 
 /*
+ * 34K core erratum: "Problems Executing the TLBR Instruction"
+ */
+#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
+	defined(CONFIG_PMC_MSP7120_FPGA)
+#define MIPS34K_MISSED_ITLB_WAR		1
+#endif
+
+/*
  * Workarounds default to off
  */
 #ifndef ICACHE_REFILLS_WORKAROUND_WAR
@@ -234,5 +244,8 @@
 #ifndef R10000_LLSC_WAR
 #define R10000_LLSC_WAR			0
 #endif
+#ifndef MIPS34K_MISSED_ITLB_WAR
+#define MIPS34K_MISSED_ITLB_WAR		0
+#endif
 
 #endif /* _ASM_WAR_H */
diff --git a/include/asm-mips/watch.h b/include/asm-mips/watch.h
deleted file mode 100644
index 6aa90cae1114..000000000000
--- a/include/asm-mips/watch.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997, 1998, 2000, 2001 by Ralf Baechle
- */
-#ifndef _ASM_WATCH_H
-#define _ASM_WATCH_H
-
-#include <linux/linkage.h>
-
-/*
- * Types of reference for watch_set()
- */
-enum wref_type {
-	wr_save = 1,
-	wr_load = 2
-};
-
-extern asmlinkage void __watch_set(unsigned long addr, enum wref_type ref);
-extern asmlinkage void __watch_clear(void);
-extern asmlinkage void __watch_reenable(void);
-
-#define watch_set(addr, ref)					\
-	if (cpu_has_watch)					\
-		__watch_set(addr, ref)
-#define watch_clear()						\
-	if (cpu_has_watch)					\
-		__watch_clear()
-#define watch_reenable()					\
-	if (cpu_has_watch)					\
-		__watch_reenable()
-
-#endif /* _ASM_WATCH_H */
author	Steve French <sfrench@us.ibm.com>	2007-07-19 04:38:57 +0400
committer	Steve French <sfrench@us.ibm.com>	2007-07-19 04:38:57 +0400
commit	1ff8392c32a2645d2665ca779ecb91bb29361c13 (patch)
tree	860b95e9a499ade4060848740fc6ce1fbb4e4e8d /include/asm-mips
parent	70b315b0dd3879cb3ab8aadffb14f10b2d19b9c3 (diff)
parent	5bae7ac9feba925fd0099057f6b23d7be80b7b41 (diff)
download	linux-1ff8392c32a2645d2665ca779ecb91bb29361c13.tar.xz