Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...

1 files changed, 48 insertions, 45 deletions

diff --git a/fs/signalfd.c b/fs/signalfd.c
index d2187a813376..cbb42f77a2bd 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -81,83 +81,86 @@ static __poll_t signalfd_poll(struct file *file, poll_table *wait)
 static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
 			     siginfo_t const *kinfo)
 {
-	long err;
+	struct signalfd_siginfo new;
 
 	BUILD_BUG_ON(sizeof(struct signalfd_siginfo) != 128);
 
 	/*
 	 * Unused members should be zero ...
 	 */
-	err = __clear_user(uinfo, sizeof(*uinfo));
+	memset(&new, 0, sizeof(new));
 
 	/*
 	 * If you change siginfo_t structure, please be sure
 	 * this code is fixed accordingly.
 	 */
-	err |= __put_user(kinfo->si_signo, &uinfo->ssi_signo);
-	err |= __put_user(kinfo->si_errno, &uinfo->ssi_errno);
-	err |= __put_user(kinfo->si_code, &uinfo->ssi_code);
+	new.ssi_signo = kinfo->si_signo;
+	new.ssi_errno = kinfo->si_errno;
+	new.ssi_code  = kinfo->si_code;
 	switch (siginfo_layout(kinfo->si_signo, kinfo->si_code)) {
 	case SIL_KILL:
-		err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
-		err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
+		new.ssi_pid = kinfo->si_pid;
+		new.ssi_uid = kinfo->si_uid;
 		break;
 	case SIL_TIMER:
-		 err |= __put_user(kinfo->si_tid, &uinfo->ssi_tid);
-		 err |= __put_user(kinfo->si_overrun, &uinfo->ssi_overrun);
-		 err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
-		 err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
+		new.ssi_tid = kinfo->si_tid;
+		new.ssi_overrun = kinfo->si_overrun;
+		new.ssi_ptr = (long) kinfo->si_ptr;
+		new.ssi_int = kinfo->si_int;
 		break;
 	case SIL_POLL:
-		err |= __put_user(kinfo->si_band, &uinfo->ssi_band);
-		err |= __put_user(kinfo->si_fd, &uinfo->ssi_fd);
+		new.ssi_band = kinfo->si_band;
+		new.ssi_fd   = kinfo->si_fd;
 		break;
-	case SIL_FAULT:
-		err |= __put_user((long) kinfo->si_addr, &uinfo->ssi_addr);
-#ifdef __ARCH_SI_TRAPNO
-		err |= __put_user(kinfo->si_trapno, &uinfo->ssi_trapno);
-#endif
-#ifdef BUS_MCEERR_AO
+	case SIL_FAULT_BNDERR:
+	case SIL_FAULT_PKUERR:
 		/*
-		 * Other callers might not initialize the si_lsb field,
-		 * so check explicitly for the right codes here.
+		 * Fall through to the SIL_FAULT case.  Both SIL_FAULT_BNDERR
+		 * and SIL_FAULT_PKUERR are only generated by faults that
+		 * deliver them synchronously to userspace.  In case someone
+		 * injects one of these signals and signalfd catches it treat
+		 * it as SIL_FAULT.
 		 */
-		if (kinfo->si_signo == SIGBUS &&
-		     kinfo->si_code == BUS_MCEERR_AO)
-			err |= __put_user((short) kinfo->si_addr_lsb,
-					  &uinfo->ssi_addr_lsb);
+	case SIL_FAULT:
+		new.ssi_addr = (long) kinfo->si_addr;
+#ifdef __ARCH_SI_TRAPNO
+		new.ssi_trapno = kinfo->si_trapno;
 #endif
-#ifdef BUS_MCEERR_AR
-		/*
-		 * Other callers might not initialize the si_lsb field,
-		 * so check explicitly for the right codes here.
-		 */
-		if (kinfo->si_signo == SIGBUS &&
-		    kinfo->si_code == BUS_MCEERR_AR)
-			err |= __put_user((short) kinfo->si_addr_lsb,
-					  &uinfo->ssi_addr_lsb);
+		break;
+	case SIL_FAULT_MCEERR:
+		new.ssi_addr = (long) kinfo->si_addr;
+#ifdef __ARCH_SI_TRAPNO
+		new.ssi_trapno = kinfo->si_trapno;
 #endif
+		new.ssi_addr_lsb = (short) kinfo->si_addr_lsb;
 		break;
 	case SIL_CHLD:
-		err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
-		err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
-		err |= __put_user(kinfo->si_status, &uinfo->ssi_status);
-		err |= __put_user(kinfo->si_utime, &uinfo->ssi_utime);
-		err |= __put_user(kinfo->si_stime, &uinfo->ssi_stime);
+		new.ssi_pid    = kinfo->si_pid;
+		new.ssi_uid    = kinfo->si_uid;
+		new.ssi_status = kinfo->si_status;
+		new.ssi_utime  = kinfo->si_utime;
+		new.ssi_stime  = kinfo->si_stime;
 		break;
 	case SIL_RT:
-	default:
 		/*
 		 * This case catches also the signals queued by sigqueue().
 		 */
-		err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
-		err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
-		err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
-		err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
+		new.ssi_pid = kinfo->si_pid;
+		new.ssi_uid = kinfo->si_uid;
+		new.ssi_ptr = (long) kinfo->si_ptr;
+		new.ssi_int = kinfo->si_int;
+		break;
+	case SIL_SYS:
+		new.ssi_call_addr = (long) kinfo->si_call_addr;
+		new.ssi_syscall   = kinfo->si_syscall;
+		new.ssi_arch      = kinfo->si_arch;
 		break;
 	}
 
-	return err ? -EFAULT: sizeof(*uinfo);
+	if (copy_to_user(uinfo, &new, sizeof(struct signalfd_siginfo)))
+		return -EFAULT;
+
+	return sizeof(*uinfo);
 }
 
 static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info,