Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Most notable:

   - introducing the i2c_quirk infrastructure.  Now, flaws of I2C
     controllers can be described and the core will check if the flaws
     collide with the messages to be sent

   - wait_for_completion return type cleanup series

   - new drivers for Digicolor, Netlogic XLP, Ingenic JZ4780

   - updates to the I2C slave framework which include API changes.  Its
     only user was updated, too.  Documentation was finally added

   - changed dynamic bus numbering for the DT case.  This could change
     bus numbers for users.  However, it fixes a collision where dynamic
     and static busses request the same id.

   - driver bugfixes, cleanups"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller
  of: Add vendor prefix 'netlogic'
  i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  i2c: davinci: use bus recovery infrastructure
  i2c: change input parameter to i2c_adapter for prepare/unprepare_recovery
  i2c: i2c-mux-gpio: remove error messages for probe deferrals
  i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780
  i2c: dln2: set the device tree node of the adapter
  i2c: davinci: fixup wait_for_completion_timeout handling
  i2c: mpc: Fix ISR return value
  i2c: slave-eeprom: add more info when to increase the pointer
  i2c: slave: add documentation for i2c-slave-eeprom
  Documentation: i2c: describe the new slave mode
  i2c: slave: rework the slave API
  i2c: add support for the Digicolor I2C controller
  i2c: busses with dynamic ids should start after fixed ids for DT
  of: base: add function to get highest id of an alias stem
  i2c: designware: Suppress error message if platform_get_irq() < 0
  i2c: mpc: assign the correct prescaler from SVR
  i2c: img-scb: fixup of wait_for_completion_timeout return handling
  ...

35 files changed, 2148 insertions, 266 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 22da9c2ffa22..2255af23b9c7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -485,6 +485,15 @@ config I2C_DESIGNWARE_BAYTRAIL
 	  the platform firmware controlling it. You should say Y if running on
 	  a BayTrail system using the AXP288.
 
+config I2C_DIGICOLOR
+	tristate "Conexant Digicolor I2C driver"
+	depends on ARCH_DIGICOLOR
+	help
+	  Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-digicolor.
+
 config I2C_EFM32
 	tristate "EFM32 I2C controller"
 	depends on ARCH_EFM32 || COMPILE_TEST
@@ -574,6 +583,15 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
+config I2C_JZ4780
+	tristate "JZ4780 I2C controller interface support"
+	depends on MACH_JZ4780 || COMPILE_TEST
+	help
+	 If you say yes to this option, support will be included for the
+	 Ingenic JZ4780 I2C controller.
+
+	 If you don't know what to do here, say N.
+
 config I2C_KEMPLD
 	tristate "Kontron COM I2C Controller"
 	depends on MFD_KEMPLD
@@ -898,6 +916,16 @@ config I2C_XLR
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-xlr.
 
+config I2C_XLP9XX
+	tristate "XLP9XX I2C support"
+	depends on CPU_XLP || COMPILE_TEST
+	help
+	  This driver enables support for the on-chip I2C interface of
+	  the Broadcom XLP9xx/XLP5xx MIPS processors.
+
+	  This driver can also be built as a module.  If so, the module will
+	  be called i2c-xlp9xx.
+
 config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
 	depends on ARCH_SHMOBILE || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 3638feb6677e..cdf941da91c6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -45,6 +45,7 @@ i2c-designware-platform-objs := i2c-designware-platdrv.o
 i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
 i2c-designware-pci-objs := i2c-designware-pcidrv.o
+obj-$(CONFIG_I2C_DIGICOLOR)	+= i2c-digicolor.o
 obj-$(CONFIG_I2C_EFM32)		+= i2c-efm32.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMG)		+= i2c-img-scb.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
 obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
 obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
@@ -87,6 +89,7 @@ obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
 obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
+obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
 obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
 
 # External I2C/SMBus adapter drivers
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 636fd2efad88..ff23d1bdd230 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -381,6 +381,7 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
 static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 {
 	int ret;
+	unsigned long time_left;
 	bool has_unre_flag = dev->pdata->has_unre_flag;
 
 	dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
@@ -436,9 +437,9 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		}
 	}
 
-	ret = wait_for_completion_timeout(&dev->cmd_complete,
-					     dev->adapter.timeout);
-	if (ret == 0) {
+	time_left = wait_for_completion_timeout(&dev->cmd_complete,
+					      dev->adapter.timeout);
+	if (time_left == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		at91_init_twi_bus(dev);
 		ret = -ETIMEDOUT;
@@ -487,30 +488,10 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	if (ret < 0)
 		goto out;
 
-	/*
-	 * The hardware can handle at most two messages concatenated by a
-	 * repeated start via it's internal address feature.
-	 */
-	if (num > 2) {
-		dev_err(dev->dev,
-			"cannot handle more than two concatenated messages.\n");
-		ret = 0;
-		goto out;
-	} else if (num == 2) {
+	if (num == 2) {
 		int internal_address = 0;
 		int i;
 
-		if (msg->flags & I2C_M_RD) {
-			dev_err(dev->dev, "first transfer must be write.\n");
-			ret = -EINVAL;
-			goto out;
-		}
-		if (msg->len > 3) {
-			dev_err(dev->dev, "first message size must be <= 3.\n");
-			ret = -EINVAL;
-			goto out;
-		}
-
 		/* 1st msg is put into the internal address, start with 2nd */
 		m_start = &msg[1];
 		for (i = 0; i < msg->len; ++i) {
@@ -540,6 +521,15 @@ out:
 	return ret;
 }
 
+/*
+ * The hardware can handle at most two messages concatenated by a
+ * repeated start via it's internal address feature.
+ */
+static struct i2c_adapter_quirks at91_twi_quirks = {
+	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+	.max_comb_1st_msg_len = 3,
+};
+
 static u32 at91_twi_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
@@ -777,6 +767,7 @@ static int at91_twi_probe(struct platform_device *pdev)
 	dev->adapter.owner = THIS_MODULE;
 	dev->adapter.class = I2C_CLASS_DEPRECATED;
 	dev->adapter.algo = &at91_twi_algorithm;
+	dev->adapter.quirks = &at91_twi_quirks;
 	dev->adapter.dev.parent = dev->dev;
 	dev->adapter.nr = pdev->id;
 	dev->adapter.timeout = AT91_I2C_TIMEOUT;
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 768a598d8d03..32d883490863 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -334,12 +334,7 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
 	u32 rx_xfer, tx_xfer;
 	u32 addr_1, addr_2;
-	int ret;
-
-	if (msg->len > 255) {
-		dev_warn(idev->dev, "unsupported length %u\n", msg->len);
-		return -EINVAL;
-	}
+	unsigned long time_left;
 
 	idev->msg = msg;
 	idev->msg_xfrd = 0;
@@ -388,15 +383,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 
 	i2c_int_enable(idev, int_mask);
 
-	ret = wait_for_completion_timeout(&idev->msg_complete,
-					  I2C_XFER_TIMEOUT);
+	time_left = wait_for_completion_timeout(&idev->msg_complete,
+					      I2C_XFER_TIMEOUT);
 
 	i2c_int_disable(idev, int_mask);
 
 	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
 		dev_warn(idev->dev, "busy after xfer\n");
 
-	if (ret == 0)
+	if (time_left == 0)
 		idev->msg_err = -ETIMEDOUT;
 
 	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
@@ -408,17 +403,17 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
 {
 	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
-	int ret;
+	unsigned long time_left;
 
 	reinit_completion(&idev->msg_complete);
 
 	/* Issue stop */
 	writel(0xb, idev->base + MST_COMMAND);
 	i2c_int_enable(idev, int_mask);
-	ret = wait_for_completion_timeout(&idev->msg_complete,
-					  I2C_STOP_TIMEOUT);
+	time_left = wait_for_completion_timeout(&idev->msg_complete,
+					      I2C_STOP_TIMEOUT);
 	i2c_int_disable(idev, int_mask);
-	if (ret == 0)
+	if (time_left == 0)
 		return -ETIMEDOUT;
 
 	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
@@ -454,6 +449,11 @@ static const struct i2c_algorithm axxia_i2c_algo = {
 	.functionality = axxia_i2c_func,
 };
 
+static struct i2c_adapter_quirks axxia_i2c_quirks = {
+	.max_read_len = 255,
+	.max_write_len = 255,
+};
+
 static int axxia_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -511,6 +511,7 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
 	idev->adapter.owner = THIS_MODULE;
 	idev->adapter.algo = &axxia_i2c_algo;
+	idev->adapter.quirks = &axxia_i2c_quirks;
 	idev->adapter.dev.parent = &pdev->dev;
 	idev->adapter.dev.of_node = pdev->dev.of_node;
 
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index d3c89157b337..f9f2c2082151 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -160,14 +160,6 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
 	u32 val;
 	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC);
 
-	/* need to reserve one byte in the FIFO for the slave address */
-	if (msg->len > M_TX_RX_FIFO_SIZE - 1) {
-		dev_err(iproc_i2c->device,
-			"only support data length up to %u bytes\n",
-			M_TX_RX_FIFO_SIZE - 1);
-		return -EOPNOTSUPP;
-	}
-
 	/* check if bus is busy */
 	if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
 	       BIT(M_CMD_START_BUSY_SHIFT))) {
@@ -287,6 +279,12 @@ static const struct i2c_algorithm bcm_iproc_algo = {
 	.functionality = bcm_iproc_i2c_functionality,
 };
 
+static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
+	/* need to reserve one byte in the FIFO for the slave address */
+	.max_read_len = M_TX_RX_FIFO_SIZE - 1,
+	.max_write_len = M_TX_RX_FIFO_SIZE - 1,
+};
+
 static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
 {
 	unsigned int bus_speed;
@@ -413,6 +411,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, iproc_i2c);
 	strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name));
 	adap->algo = &bcm_iproc_algo;
+	adap->quirks = &bcm_iproc_i2c_quirks;
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 5d6feb937b9d..c9336a3202d5 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -147,7 +147,7 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev,
 				struct i2c_msg *msg)
 {
 	u32 c;
-	int time_left;
+	unsigned long time_left;
 
 	i2c_dev->msg_buf = msg->buf;
 	i2c_dev->msg_buf_remaining = msg->len;
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 7d7a14cdadfb..2ee78e099d30 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -475,7 +475,7 @@ static void cdns_i2c_master_reset(struct i2c_adapter *adap)
 static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
 		struct i2c_adapter *adap)
 {
-	int ret;
+	unsigned long time_left;
 	u32 reg;
 
 	id->p_msg = msg;
@@ -501,8 +501,8 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
 		cdns_i2c_msend(id);
 
 	/* Wait for the signal of completion */
-	ret = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
-	if (!ret) {
+	time_left = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
+	if (time_left == 0) {
 		cdns_i2c_master_reset(adap);
 		dev_err(id->adap.dev.parent,
 				"timeout waiting on completion\n");
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 2d466538b2e2..714bdc837769 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -308,22 +308,12 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
 	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
 	struct i2c_msg *pmsg;
-	int ret, i;
+	int ret;
 	int tptr;
 	int rptr;
 	cbd_t __iomem *tbdf;
 	cbd_t __iomem *rbdf;
 
-	if (num > CPM_MAXBD)
-		return -EINVAL;
-
-	/* Check if we have any oversized READ requests */
-	for (i = 0; i < num; i++) {
-		pmsg = &msgs[i];
-		if (pmsg->len >= CPM_MAX_READ)
-			return -EINVAL;
-	}
-
 	/* Reset to use first buffer */
 	out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase));
 	out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase));
@@ -424,10 +414,18 @@ static const struct i2c_algorithm cpm_i2c_algo = {
 	.functionality = cpm_i2c_func,
 };
 
+/* CPM_MAX_READ is also limiting writes according to the code! */
+static struct i2c_adapter_quirks cpm_i2c_quirks = {
+	.max_num_msgs = CPM_MAXBD,
+	.max_read_len = CPM_MAX_READ,
+	.max_write_len = CPM_MAX_READ,
+};
+
 static const struct i2c_adapter cpm_ops = {
 	.owner		= THIS_MODULE,
 	.name		= "i2c-cpm",
 	.algo		= &cpm_i2c_algo,
+	.quirks		= &cpm_i2c_quirks,
 };
 
 static int cpm_i2c_setup(struct cpm_i2c *cpm)
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 6dc7ff5d3d9a..4788a32afb86 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -60,6 +60,12 @@
 #define DAVINCI_I2C_IVR_REG	0x28
 #define DAVINCI_I2C_EMDR_REG	0x2c
 #define DAVINCI_I2C_PSC_REG	0x30
+#define DAVINCI_I2C_FUNC_REG	0x48
+#define DAVINCI_I2C_DIR_REG	0x4c
+#define DAVINCI_I2C_DIN_REG	0x50
+#define DAVINCI_I2C_DOUT_REG	0x54
+#define DAVINCI_I2C_DSET_REG	0x58
+#define DAVINCI_I2C_DCLR_REG	0x5c
 
 #define DAVINCI_I2C_IVR_AAS	0x07
 #define DAVINCI_I2C_IVR_SCD	0x06
@@ -93,6 +99,29 @@
 #define DAVINCI_I2C_IMR_NACK	BIT(1)
 #define DAVINCI_I2C_IMR_AL	BIT(0)
 
+/* set SDA and SCL as GPIO */
+#define DAVINCI_I2C_FUNC_PFUNC0	BIT(0)
+
+/* set SCL as output when used as GPIO*/
+#define DAVINCI_I2C_DIR_PDIR0	BIT(0)
+/* set SDA as output when used as GPIO*/
+#define DAVINCI_I2C_DIR_PDIR1	BIT(1)
+
+/* read SCL GPIO level */
+#define DAVINCI_I2C_DIN_PDIN0 BIT(0)
+/* read SDA GPIO level */
+#define DAVINCI_I2C_DIN_PDIN1 BIT(1)
+
+/*set the SCL GPIO high */
+#define DAVINCI_I2C_DSET_PDSET0	BIT(0)
+/*set the SDA GPIO high */
+#define DAVINCI_I2C_DSET_PDSET1	BIT(1)
+
+/* set the SCL GPIO low */
+#define DAVINCI_I2C_DCLR_PDCLR0	BIT(0)
+/* set the SDA GPIO low */
+#define DAVINCI_I2C_DCLR_PDCLR1	BIT(1)
+
 struct davinci_i2c_dev {
 	struct device           *dev;
 	void __iomem		*base;
@@ -129,43 +158,6 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
 	return readw_relaxed(i2c_dev->base + reg);
 }
 
-/* Generate a pulse on the i2c clock pin. */
-static void davinci_i2c_clock_pulse(unsigned int scl_pin)
-{
-	u16 i;
-
-	if (scl_pin) {
-		/* Send high and low on the SCL line */
-		for (i = 0; i < 9; i++) {
-			gpio_set_value(scl_pin, 0);
-			udelay(20);
-			gpio_set_value(scl_pin, 1);
-			udelay(20);
-		}
-	}
-}
-
-/* This routine does i2c bus recovery as specified in the
- * i2c protocol Rev. 03 section 3.16 titled "Bus clear"
- */
-static void davinci_i2c_recover_bus(struct davinci_i2c_dev *dev)
-{
-	u32 flag = 0;
-	struct davinci_i2c_platform_data *pdata = dev->pdata;
-
-	dev_err(dev->dev, "initiating i2c bus recovery\n");
-	/* Send NACK to the slave */
-	flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-	flag |=  DAVINCI_I2C_MDR_NACK;
-	/* write the data into mode register */
-	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-	davinci_i2c_clock_pulse(pdata->scl_pin);
-	/* Send STOP */
-	flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-	flag |= DAVINCI_I2C_MDR_STP;
-	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-}
-
 static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
 								int val)
 {
@@ -263,6 +255,99 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 }
 
 /*
+ * This routine does i2c bus recovery by using i2c_generic_gpio_recovery
+ * which is provided by I2C Bus recovery infrastructure.
+ */
+static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	/* Disable interrupts */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, 0);
+
+	/* put I2C into reset */
+	davinci_i2c_reset_ctrl(dev, 0);
+}
+
+static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	i2c_davinci_init(dev);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
+	.recover_bus = i2c_generic_gpio_recovery,
+	.prepare_recovery = davinci_i2c_prepare_recovery,
+	.unprepare_recovery = davinci_i2c_unprepare_recovery,
+};
+
+static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	if (val)
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_DSET_REG,
+				      DAVINCI_I2C_DSET_PDSET0);
+	else
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_DCLR_REG,
+				      DAVINCI_I2C_DCLR_PDCLR0);
+}
+
+static int davinci_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+	int val;
+
+	/* read the state of SCL */
+	val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
+	return val & DAVINCI_I2C_DIN_PDIN0;
+}
+
+static int davinci_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+	int val;
+
+	/* read the state of SDA */
+	val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
+	return val & DAVINCI_I2C_DIN_PDIN1;
+}
+
+static void davinci_i2c_scl_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	davinci_i2c_prepare_recovery(adap);
+
+	/* SCL output, SDA input */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_DIR_REG, DAVINCI_I2C_DIR_PDIR0);
+
+	/* change to GPIO mode */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG,
+			      DAVINCI_I2C_FUNC_PFUNC0);
+}
+
+static void davinci_i2c_scl_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	/* change back to I2C mode */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG, 0);
+
+	davinci_i2c_unprepare_recovery(adap);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_scl_recovery_info = {
+	.recover_bus = i2c_generic_scl_recovery,
+	.set_scl = davinci_i2c_set_scl,
+	.get_scl = davinci_i2c_get_scl,
+	.get_sda = davinci_i2c_get_sda,
+	.prepare_recovery = davinci_i2c_scl_prepare_recovery,
+	.unprepare_recovery = davinci_i2c_scl_unprepare_recovery,
+};
+
+/*
  * Waiting for bus not busy
  */
 static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
@@ -282,8 +367,7 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
 				return -ETIMEDOUT;
 			} else {
 				to_cnt = 0;
-				davinci_i2c_recover_bus(dev);
-				i2c_davinci_init(dev);
+				i2c_recover_bus(&dev->adapter);
 			}
 		}
 		if (allow_sleep)
@@ -304,7 +388,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	struct davinci_i2c_platform_data *pdata = dev->pdata;
 	u32 flag;
 	u16 w;
-	int r;
+	unsigned long time_left;
 
 	/* Introduce a delay, required for some boards (e.g Davinci EVM) */
 	if (pdata->bus_delay)
@@ -368,11 +452,11 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		flag |= DAVINCI_I2C_MDR_STP;
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
-	r = wait_for_completion_timeout(&dev->cmd_complete, dev->adapter.timeout);
-	if (r == 0) {
+	time_left = wait_for_completion_timeout(&dev->cmd_complete,
+						dev->adapter.timeout);
+	if (!time_left) {
 		dev_err(dev->dev, "controller timed out\n");
-		davinci_i2c_recover_bus(dev);
-		i2c_davinci_init(dev);
+		i2c_recover_bus(adap);
 		dev->buf_len = 0;
 		return -ETIMEDOUT;
 	}
@@ -380,17 +464,13 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		/* This should be 0 if all bytes were transferred
 		 * or dev->cmd_err denotes an error.
 		 */
-		if (r >= 0) {
-			dev_err(dev->dev, "abnormal termination buf_len=%i\n",
-				dev->buf_len);
-			r = -EREMOTEIO;
-		}
+		dev_err(dev->dev, "abnormal termination buf_len=%i\n",
+			dev->buf_len);
 		dev->terminate = 1;
 		wmb();
 		dev->buf_len = 0;
+		return -EREMOTEIO;
 	}
-	if (r < 0)
-		return r;
 
 	/* no error */
 	if (likely(!dev->cmd_err))
@@ -674,6 +754,10 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 			&prop))
 			dev->pdata->bus_freq = prop / 1000;
+
+		dev->pdata->has_pfunc =
+			of_property_read_bool(pdev->dev.of_node,
+					      "ti,has-pfunc");
 	} else if (!dev->pdata) {
 		dev->pdata = &davinci_i2c_platform_data_default;
 	}
@@ -715,6 +799,14 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	adap->timeout = DAVINCI_I2C_TIMEOUT;
 	adap->dev.of_node = pdev->dev.of_node;
 
+	if (dev->pdata->has_pfunc)
+		adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
+	else if (dev->pdata->scl_pin) {
+		adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info;
+		adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin;
+		adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin;
+	}
+
 	adap->nr = pdev->id;
 	r = i2c_add_numbered_adapter(adap);
 	if (r) {
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 6e25c010e690..6f19a33773fe 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -656,8 +656,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* wait for tx to complete */
-	ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
-	if (ret == 0) {
+	if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) {
 		dev_err(dev->dev, "controller timed out\n");
 		/* i2c_dw_init implicitly disables the adapter */
 		i2c_dw_init(dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c270f5f9a8f9..fa4e2b521f0d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -143,10 +143,8 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	u32 clk_freq, ht = 0;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
-		return irq; /* -ENXIO */
-	}
+	if (irq < 0)
+		return irq;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
 	if (!dev)
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
new file mode 100644
index 000000000000..03f1e5549896
--- /dev/null
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -0,0 +1,385 @@
+/*
+ * I2C bus driver for Conexant Digicolor SoCs
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * Copyright (C) 2015 Paradox Innovation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_FREQ		100000
+#define TIMEOUT_MS		100
+
+#define II_CONTROL		0x0
+#define II_CONTROL_LOCAL_RESET	BIT(0)
+
+#define II_CLOCKTIME		0x1
+
+#define II_COMMAND		0x2
+#define II_CMD_START		1
+#define II_CMD_RESTART		2
+#define II_CMD_SEND_ACK		3
+#define II_CMD_GET_ACK		6
+#define II_CMD_GET_NOACK	7
+#define II_CMD_STOP		10
+#define II_COMMAND_GO		BIT(7)
+#define II_COMMAND_COMPLETION_STATUS(r)	(((r) >> 5) & 3)
+#define II_CMD_STATUS_NORMAL	0
+#define II_CMD_STATUS_ACK_GOOD	1
+#define II_CMD_STATUS_ACK_BAD	2
+#define II_CMD_STATUS_ABORT	3
+
+#define II_DATA			0x3
+#define II_INTFLAG_CLEAR	0x8
+#define II_INTENABLE		0xa
+
+struct dc_i2c {
+	struct i2c_adapter	adap;
+	struct device		*dev;
+	void __iomem		*regs;
+	struct clk		*clk;
+	unsigned int		frequency;
+
+	struct i2c_msg		*msg;
+	unsigned int		msgbuf_ptr;
+	int			last;
+	spinlock_t		lock;
+	struct completion	done;
+	int			state;
+	int			error;
+};
+
+enum {
+	STATE_IDLE,
+	STATE_START,
+	STATE_ADDR,
+	STATE_WRITE,
+	STATE_READ,
+	STATE_STOP,
+};
+
+static void dc_i2c_cmd(struct dc_i2c *i2c, u8 cmd)
+{
+	writeb_relaxed(cmd | II_COMMAND_GO, i2c->regs + II_COMMAND);
+}
+
+static u8 dc_i2c_addr_cmd(struct i2c_msg *msg)
+{
+	u8 addr = (msg->addr & 0x7f) << 1;
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	return addr;
+}
+
+static void dc_i2c_data(struct dc_i2c *i2c, u8 data)
+{
+	writeb_relaxed(data, i2c->regs + II_DATA);
+}
+
+static void dc_i2c_write_byte(struct dc_i2c *i2c, u8 byte)
+{
+	dc_i2c_data(i2c, byte);
+	dc_i2c_cmd(i2c, II_CMD_SEND_ACK);
+}
+
+static void dc_i2c_write_buf(struct dc_i2c *i2c)
+{
+	dc_i2c_write_byte(i2c, i2c->msg->buf[i2c->msgbuf_ptr++]);
+}
+
+static void dc_i2c_next_read(struct dc_i2c *i2c)
+{
+	bool last = (i2c->msgbuf_ptr + 1 == i2c->msg->len);
+
+	dc_i2c_cmd(i2c, last ? II_CMD_GET_NOACK : II_CMD_GET_ACK);
+}
+
+static void dc_i2c_stop(struct dc_i2c *i2c)
+{
+	i2c->state = STATE_STOP;
+	if (i2c->last)
+		dc_i2c_cmd(i2c, II_CMD_STOP);
+	else
+		complete(&i2c->done);
+}
+
+static u8 dc_i2c_read_byte(struct dc_i2c *i2c)
+{
+	return readb_relaxed(i2c->regs + II_DATA);
+}
+
+static void dc_i2c_read_buf(struct dc_i2c *i2c)
+{
+	i2c->msg->buf[i2c->msgbuf_ptr++] = dc_i2c_read_byte(i2c);
+	dc_i2c_next_read(i2c);
+}
+
+static void dc_i2c_set_irq(struct dc_i2c *i2c, int enable)
+{
+	if (enable)
+		writeb_relaxed(1, i2c->regs + II_INTFLAG_CLEAR);
+	writeb_relaxed(!!enable, i2c->regs + II_INTENABLE);
+}
+
+static int dc_i2c_cmd_status(struct dc_i2c *i2c)
+{
+	u8 cmd = readb_relaxed(i2c->regs + II_COMMAND);
+
+	return II_COMMAND_COMPLETION_STATUS(cmd);
+}
+
+static void dc_i2c_start_msg(struct dc_i2c *i2c, int first)
+{
+	struct i2c_msg *msg = i2c->msg;
+
+	if (!(msg->flags & I2C_M_NOSTART)) {
+		i2c->state = STATE_START;
+		dc_i2c_cmd(i2c, first ? II_CMD_START : II_CMD_RESTART);
+	} else if (msg->flags & I2C_M_RD) {
+		i2c->state = STATE_READ;
+		dc_i2c_next_read(i2c);
+	} else {
+		i2c->state = STATE_WRITE;
+		dc_i2c_write_buf(i2c);
+	}
+}
+
+static irqreturn_t dc_i2c_irq(int irq, void *dev_id)
+{
+	struct dc_i2c *i2c = dev_id;
+	int cmd_status = dc_i2c_cmd_status(i2c);
+	unsigned long flags;
+	u8 addr_cmd;
+
+	writeb_relaxed(1, i2c->regs + II_INTFLAG_CLEAR);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	if (cmd_status == II_CMD_STATUS_ACK_BAD
+	    || cmd_status == II_CMD_STATUS_ABORT) {
+		i2c->error = -EIO;
+		complete(&i2c->done);
+		goto out;
+	}
+
+	switch (i2c->state) {
+	case STATE_START:
+		addr_cmd = dc_i2c_addr_cmd(i2c->msg);
+		dc_i2c_write_byte(i2c, addr_cmd);
+		i2c->state = STATE_ADDR;
+		break;
+	case STATE_ADDR:
+		if (i2c->msg->flags & I2C_M_RD) {
+			dc_i2c_next_read(i2c);
+			i2c->state = STATE_READ;
+			break;
+		}
+		i2c->state = STATE_WRITE;
+		/* fall through */
+	case STATE_WRITE:
+		if (i2c->msgbuf_ptr < i2c->msg->len)
+			dc_i2c_write_buf(i2c);
+		else
+			dc_i2c_stop(i2c);
+		break;
+	case STATE_READ:
+		if (i2c->msgbuf_ptr < i2c->msg->len)
+			dc_i2c_read_buf(i2c);
+		else
+			dc_i2c_stop(i2c);
+		break;
+	case STATE_STOP:
+		i2c->state = STATE_IDLE;
+		complete(&i2c->done);
+		break;
+	}
+
+out:
+	spin_unlock_irqrestore(&i2c->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int dc_i2c_xfer_msg(struct dc_i2c *i2c, struct i2c_msg *msg, int first,
+			   int last)
+{
+	unsigned long timeout = msecs_to_jiffies(TIMEOUT_MS);
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	i2c->msg = msg;
+	i2c->msgbuf_ptr = 0;
+	i2c->last = last;
+	i2c->error = 0;
+
+	reinit_completion(&i2c->done);
+	dc_i2c_set_irq(i2c, 1);
+	dc_i2c_start_msg(i2c, first);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->done, timeout);
+	dc_i2c_set_irq(i2c, 0);
+	if (timeout == 0) {
+		i2c->state = STATE_IDLE;
+		return -ETIMEDOUT;
+	}
+
+	if (i2c->error)
+		return i2c->error;
+
+	return 0;
+}
+
+static int dc_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct dc_i2c *i2c = adap->algo_data;
+	int i, ret;
+
+	for (i = 0; i < num; i++) {
+		ret = dc_i2c_xfer_msg(i2c, &msgs[i], i == 0, i == num - 1);
+		if (ret)
+			return ret;
+	}
+
+	return num;
+}
+
+static int dc_i2c_init_hw(struct dc_i2c *i2c)
+{
+	unsigned long clk_rate = clk_get_rate(i2c->clk);
+	unsigned int clocktime;
+
+	writeb_relaxed(II_CONTROL_LOCAL_RESET, i2c->regs + II_CONTROL);
+	udelay(100);
+	writeb_relaxed(0, i2c->regs + II_CONTROL);
+	udelay(100);
+
+	clocktime = DIV_ROUND_UP(clk_rate, 64 * i2c->frequency);
+	if (clocktime < 1 || clocktime > 0xff) {
+		dev_err(i2c->dev, "can't set bus speed of %u Hz\n",
+			i2c->frequency);
+		return -EINVAL;
+	}
+	writeb_relaxed(clocktime - 1, i2c->regs + II_CLOCKTIME);
+
+	return 0;
+}
+
+static u32 dc_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm dc_i2c_algorithm = {
+	.master_xfer	= dc_i2c_xfer,
+	.functionality	= dc_i2c_func,
+};
+
+static int dc_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct dc_i2c *i2c;
+	struct resource *r;
+	int ret = 0, irq;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct dc_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				 &i2c->frequency))
+		i2c->frequency = DEFAULT_FREQ;
+
+	i2c->dev = &pdev->dev;
+	platform_set_drvdata(pdev, i2c);
+
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->done);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return PTR_ERR(i2c->clk);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(&pdev->dev, irq, dc_i2c_irq, 0,
+			       dev_name(&pdev->dev), i2c);
+	if (ret < 0)
+		return ret;
+
+	strlcpy(i2c->adap.name, "Conexant Digicolor I2C adapter",
+		sizeof(i2c->adap.name));
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &dc_i2c_algorithm;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+
+	ret = dc_i2c_init_hw(i2c);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		clk_unprepare(i2c->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dc_i2c_remove(struct platform_device *pdev)
+{
+	struct dc_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static const struct of_device_id dc_i2c_match[] = {
+	{ .compatible = "cnxt,cx92755-i2c" },
+	{ },
+};
+
+static struct platform_driver dc_i2c_driver = {
+	.probe   = dc_i2c_probe,
+	.remove  = dc_i2c_remove,
+	.driver  = {
+		.name  = "digicolor-i2c",
+		.of_match_table = dc_i2c_match,
+	},
+};
+module_platform_driver(dc_i2c_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Conexant Digicolor I2C master driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
index b3fb86af4cbb..1600edd57ce9 100644
--- a/drivers/i2c/busses/i2c-dln2.c
+++ b/drivers/i2c/busses/i2c-dln2.c
@@ -144,7 +144,6 @@ static int dln2_i2c_xfer(struct i2c_adapter *adapter,
 {
 	struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
 	struct i2c_msg *pmsg;
-	struct device *dev = &dln2->adapter.dev;
 	int i;
 
 	for (i = 0; i < num; i++) {
@@ -152,11 +151,6 @@ static int dln2_i2c_xfer(struct i2c_adapter *adapter,
 
 		pmsg = &msgs[i];
 
-		if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) {
-			dev_warn(dev, "maximum transfer size exceeded\n");
-			return -EOPNOTSUPP;
-		}
-
 		if (pmsg->flags & I2C_M_RD) {
 			ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
 					    pmsg->len);
@@ -187,6 +181,11 @@ static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
 	.functionality = dln2_i2c_func,
 };
 
+static struct i2c_adapter_quirks dln2_i2c_quirks = {
+	.max_read_len = DLN2_I2C_MAX_XFER_SIZE,
+	.max_write_len = DLN2_I2C_MAX_XFER_SIZE,
+};
+
 static int dln2_i2c_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -209,7 +208,9 @@ static int dln2_i2c_probe(struct platform_device *pdev)
 	dln2->adapter.owner = THIS_MODULE;
 	dln2->adapter.class = I2C_CLASS_HWMON;
 	dln2->adapter.algo = &dln2_i2c_usb_algorithm;
+	dln2->adapter.quirks = &dln2_i2c_quirks;
 	dln2->adapter.dev.parent = dev;
+	dln2->adapter.dev.of_node = dev->of_node;
 	i2c_set_adapdata(&dln2->adapter, dln2);
 	snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
 		 "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 8fafb254e42a..5ecbb3fdc27e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -223,8 +223,6 @@ struct i801_priv {
 #endif
 };
 
-static struct pci_driver i801_driver;
-
 #define FEATURE_SMBUS_PEC	(1 << 0)
 #define FEATURE_BLOCK_BUFFER	(1 << 1)
 #define FEATURE_BLOCK_PROC	(1 << 2)
@@ -1140,7 +1138,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	int err, i;
 	struct i801_priv *priv;
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -1182,34 +1180,35 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 	priv->features &= ~disable_features;
 
-	err = pci_enable_device(dev);
+	err = pcim_enable_device(dev);
 	if (err) {
 		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
 			err);
-		goto exit;
+		return err;
 	}
+	pcim_pin_device(dev);
 
 	/* Determine the address of the SMBus area */
 	priv->smba = pci_resource_start(dev, SMBBAR);
 	if (!priv->smba) {
-		dev_err(&dev->dev, "SMBus base address uninitialized, "
-			"upgrade BIOS\n");
-		err = -ENODEV;
-		goto exit;
+		dev_err(&dev->dev,
+			"SMBus base address uninitialized, upgrade BIOS\n");
+		return -ENODEV;
 	}
 
 	err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
 	if (err) {
-		err = -ENODEV;
-		goto exit;
+		return -ENODEV;
 	}
 
-	err = pci_request_region(dev, SMBBAR, i801_driver.name);
+	err = pcim_iomap_regions(dev, 1 << SMBBAR,
+				 dev_driver_string(&dev->dev));
 	if (err) {
-		dev_err(&dev->dev, "Failed to request SMBus region "
-			"0x%lx-0x%Lx\n", priv->smba,
+		dev_err(&dev->dev,
+			"Failed to request SMBus region 0x%lx-0x%Lx\n",
+			priv->smba,
 			(unsigned long long)pci_resource_end(dev, SMBBAR));
-		goto exit;
+		return err;
 	}
 
 	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
@@ -1254,8 +1253,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (priv->features & FEATURE_IRQ) {
 		init_waitqueue_head(&priv->waitq);
 
-		err = request_irq(dev->irq, i801_isr, IRQF_SHARED,
-				  i801_driver.name, priv);
+		err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
+				       IRQF_SHARED,
+				       dev_driver_string(&dev->dev), priv);
 		if (err) {
 			dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
 				dev->irq, err);
@@ -1276,7 +1276,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	err = i2c_add_adapter(&priv->adapter);
 	if (err) {
 		dev_err(&dev->dev, "Failed to add SMBus adapter\n");
-		goto exit_free_irq;
+		return err;
 	}
 
 	i801_probe_optional_slaves(priv);
@@ -1286,14 +1286,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	pci_set_drvdata(dev, priv);
 
 	return 0;
-
-exit_free_irq:
-	if (priv->features & FEATURE_IRQ)
-		free_irq(dev->irq, priv);
-	pci_release_region(dev, SMBBAR);
-exit:
-	kfree(priv);
-	return err;
 }
 
 static void i801_remove(struct pci_dev *dev)
@@ -1304,11 +1296,6 @@ static void i801_remove(struct pci_dev *dev)
 	i2c_del_adapter(&priv->adapter);
 	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 
-	if (priv->features & FEATURE_IRQ)
-		free_irq(dev->irq, priv);
-	pci_release_region(dev, SMBBAR);
-
-	kfree(priv);
 	/*
 	 * do not call pci_disable_device(dev) since it can cause hard hangs on
 	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
@@ -1330,7 +1317,7 @@ static int i801_resume(struct pci_dev *dev)
 {
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
-	return pci_enable_device(dev);
+	return 0;
 }
 #else
 #define i801_suspend NULL
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 0fcc1694c607..00ffd6613680 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -988,15 +988,16 @@ out:
 static int img_i2c_reset_bus(struct img_i2c *i2c)
 {
 	unsigned long flags;
-	int ret;
+	unsigned long time_left;
 
 	spin_lock_irqsave(&i2c->lock, flags);
 	reinit_completion(&i2c->msg_complete);
 	img_i2c_reset_start(i2c);
 	spin_unlock_irqrestore(&i2c->lock, flags);
 
-	ret = wait_for_completion_timeout(&i2c->msg_complete, IMG_I2C_TIMEOUT);
-	if (ret == 0)
+	time_left = wait_for_completion_timeout(&i2c->msg_complete,
+					      IMG_I2C_TIMEOUT);
+	if (time_left == 0)
 		return -ETIMEDOUT;
 	return 0;
 }
@@ -1007,6 +1008,7 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	struct img_i2c *i2c = i2c_get_adapdata(adap);
 	bool atomic = false;
 	int i, ret;
+	unsigned long time_left;
 
 	if (i2c->mode == MODE_SUSPEND) {
 		WARN(1, "refusing to service transaction in suspended state\n");
@@ -1068,11 +1070,11 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			img_i2c_write(i2c);
 		spin_unlock_irqrestore(&i2c->lock, flags);
 
-		ret = wait_for_completion_timeout(&i2c->msg_complete,
-						  IMG_I2C_TIMEOUT);
+		time_left = wait_for_completion_timeout(&i2c->msg_complete,
+						      IMG_I2C_TIMEOUT);
 		del_timer_sync(&i2c->check_timer);
 
-		if (ret == 0) {
+		if (time_left == 0) {
 			dev_err(adap->dev.parent, "i2c transfer timed out\n");
 			i2c->msg_status = -ETIMEDOUT;
 			break;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d7b26fc6f432..a53a7dd66945 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -601,6 +601,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
 					struct i2c_msg *msgs)
 {
 	int result;
+	unsigned long time_left;
 	unsigned int temp = 0;
 	unsigned long orig_jiffies = jiffies;
 	struct imx_i2c_dma *dma = i2c_imx->dma;
@@ -624,10 +625,10 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
 	 */
 	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
 	reinit_completion(&i2c_imx->dma->cmd_complete);
-	result = wait_for_completion_timeout(
+	time_left = wait_for_completion_timeout(
 				&i2c_imx->dma->cmd_complete,
 				msecs_to_jiffies(DMA_TIMEOUT));
-	if (result == 0) {
+	if (time_left == 0) {
 		dmaengine_terminate_all(dma->chan_using);
 		return -ETIMEDOUT;
 	}
@@ -663,6 +664,7 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 			struct i2c_msg *msgs, bool is_lastmsg)
 {
 	int result;
+	unsigned long time_left;
 	unsigned int temp;
 	unsigned long orig_jiffies = jiffies;
 	struct imx_i2c_dma *dma = i2c_imx->dma;
@@ -682,10 +684,10 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 		return result;
 
 	reinit_completion(&i2c_imx->dma->cmd_complete);
-	result = wait_for_completion_timeout(
+	time_left = wait_for_completion_timeout(
 				&i2c_imx->dma->cmd_complete,
 				msecs_to_jiffies(DMA_TIMEOUT));
-	if (result == 0) {
+	if (time_left == 0) {
 		dmaengine_terminate_all(dma->chan_using);
 		return -ETIMEDOUT;
 	}
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index f2b0ff011631..f994712d0904 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -380,6 +380,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		       int size, union i2c_smbus_data *data)
 {
 	int ret;
+	unsigned long time_left;
 	dma_addr_t dma_addr = 0; /* address of the data buffer */
 	u8 dma_size = 0;
 	enum dma_data_direction dma_direction = 0;
@@ -578,13 +579,13 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 	ismt_submit_desc(priv);
 
 	/* Now we wait for interrupt completion, 1s */
-	ret = wait_for_completion_timeout(&priv->cmp, HZ*1);
+	time_left = wait_for_completion_timeout(&priv->cmp, HZ*1);
 
 	/* unmap the data buffer */
 	if (dma_size != 0)
 		dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction);
 
-	if (unlikely(!ret)) {
+	if (unlikely(!time_left)) {
 		dev_err(dev, "completion wait timed out\n");
 		ret = -ETIMEDOUT;
 		goto out;
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
new file mode 100644
index 000000000000..ce1d69324169
--- /dev/null
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -0,0 +1,832 @@
+/*
+ * Ingenic JZ4780 I2C bus driver
+ *
+ * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#define JZ4780_I2C_CTRL		0x00
+#define JZ4780_I2C_TAR		0x04
+#define JZ4780_I2C_SAR		0x08
+#define JZ4780_I2C_DC		0x10
+#define JZ4780_I2C_SHCNT	0x14
+#define JZ4780_I2C_SLCNT	0x18
+#define JZ4780_I2C_FHCNT	0x1C
+#define JZ4780_I2C_FLCNT	0x20
+#define JZ4780_I2C_INTST	0x2C
+#define JZ4780_I2C_INTM		0x30
+#define JZ4780_I2C_RXTL		0x38
+#define JZ4780_I2C_TXTL		0x3C
+#define JZ4780_I2C_CINTR	0x40
+#define JZ4780_I2C_CRXUF	0x44
+#define JZ4780_I2C_CRXOF	0x48
+#define JZ4780_I2C_CTXOF	0x4C
+#define JZ4780_I2C_CRXREQ	0x50
+#define JZ4780_I2C_CTXABRT	0x54
+#define JZ4780_I2C_CRXDONE	0x58
+#define JZ4780_I2C_CACT		0x5C
+#define JZ4780_I2C_CSTP		0x60
+#define JZ4780_I2C_CSTT		0x64
+#define JZ4780_I2C_CGC		0x68
+#define JZ4780_I2C_ENB		0x6C
+#define JZ4780_I2C_STA		0x70
+#define JZ4780_I2C_TXABRT	0x80
+#define JZ4780_I2C_DMACR	0x88
+#define JZ4780_I2C_DMATDLR	0x8C
+#define JZ4780_I2C_DMARDLR	0x90
+#define JZ4780_I2C_SDASU	0x94
+#define JZ4780_I2C_ACKGC	0x98
+#define JZ4780_I2C_ENSTA	0x9C
+#define JZ4780_I2C_SDAHD	0xD0
+
+#define JZ4780_I2C_CTRL_STPHLD		BIT(7)
+#define JZ4780_I2C_CTRL_SLVDIS		BIT(6)
+#define JZ4780_I2C_CTRL_REST		BIT(5)
+#define JZ4780_I2C_CTRL_MATP		BIT(4)
+#define JZ4780_I2C_CTRL_SATP		BIT(3)
+#define JZ4780_I2C_CTRL_SPDF		BIT(2)
+#define JZ4780_I2C_CTRL_SPDS		BIT(1)
+#define JZ4780_I2C_CTRL_MD		BIT(0)
+
+#define JZ4780_I2C_STA_SLVACT		BIT(6)
+#define JZ4780_I2C_STA_MSTACT		BIT(5)
+#define JZ4780_I2C_STA_RFF		BIT(4)
+#define JZ4780_I2C_STA_RFNE		BIT(3)
+#define JZ4780_I2C_STA_TFE		BIT(2)
+#define JZ4780_I2C_STA_TFNF		BIT(1)
+#define JZ4780_I2C_STA_ACT		BIT(0)
+
+static const char * const jz4780_i2c_abrt_src[] = {
+	"ABRT_7B_ADDR_NOACK",
+	"ABRT_10ADDR1_NOACK",
+	"ABRT_10ADDR2_NOACK",
+	"ABRT_XDATA_NOACK",
+	"ABRT_GCALL_NOACK",
+	"ABRT_GCALL_READ",
+	"ABRT_HS_ACKD",
+	"SBYTE_ACKDET",
+	"ABRT_HS_NORSTRT",
+	"SBYTE_NORSTRT",
+	"ABRT_10B_RD_NORSTRT",
+	"ABRT_MASTER_DIS",
+	"ARB_LOST",
+	"SLVFLUSH_TXFIFO",
+	"SLV_ARBLOST",
+	"SLVRD_INTX",
+};
+
+#define JZ4780_I2C_INTST_IGC		BIT(11)
+#define JZ4780_I2C_INTST_ISTT		BIT(10)
+#define JZ4780_I2C_INTST_ISTP		BIT(9)
+#define JZ4780_I2C_INTST_IACT		BIT(8)
+#define JZ4780_I2C_INTST_RXDN		BIT(7)
+#define JZ4780_I2C_INTST_TXABT		BIT(6)
+#define JZ4780_I2C_INTST_RDREQ		BIT(5)
+#define JZ4780_I2C_INTST_TXEMP		BIT(4)
+#define JZ4780_I2C_INTST_TXOF		BIT(3)
+#define JZ4780_I2C_INTST_RXFL		BIT(2)
+#define JZ4780_I2C_INTST_RXOF		BIT(1)
+#define JZ4780_I2C_INTST_RXUF		BIT(0)
+
+#define JZ4780_I2C_INTM_MIGC		BIT(11)
+#define JZ4780_I2C_INTM_MISTT		BIT(10)
+#define JZ4780_I2C_INTM_MISTP		BIT(9)
+#define JZ4780_I2C_INTM_MIACT		BIT(8)
+#define JZ4780_I2C_INTM_MRXDN		BIT(7)
+#define JZ4780_I2C_INTM_MTXABT		BIT(6)
+#define JZ4780_I2C_INTM_MRDREQ		BIT(5)
+#define JZ4780_I2C_INTM_MTXEMP		BIT(4)
+#define JZ4780_I2C_INTM_MTXOF		BIT(3)
+#define JZ4780_I2C_INTM_MRXFL		BIT(2)
+#define JZ4780_I2C_INTM_MRXOF		BIT(1)
+#define JZ4780_I2C_INTM_MRXUF		BIT(0)
+
+#define JZ4780_I2C_DC_READ		BIT(8)
+
+#define JZ4780_I2C_SDAHD_HDENB		BIT(8)
+
+#define JZ4780_I2C_ENB_I2C		BIT(0)
+
+#define JZ4780_I2CSHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8))
+#define JZ4780_I2CSLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1))
+#define JZ4780_I2CFHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8))
+#define JZ4780_I2CFLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1))
+
+#define JZ4780_I2C_FIFO_LEN	16
+#define TX_LEVEL		3
+#define RX_LEVEL		(JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
+
+#define JZ4780_I2C_TIMEOUT	300
+
+#define BUFSIZE 200
+
+struct jz4780_i2c {
+	void __iomem		*iomem;
+	int			 irq;
+	struct clk		*clk;
+	struct i2c_adapter	 adap;
+
+	/* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */
+	spinlock_t		lock;
+
+	/* beginning of lock scope */
+	unsigned char		*rbuf;
+	int			rd_total_len;
+	int			rd_data_xfered;
+	int			rd_cmd_xfered;
+
+	unsigned char		*wbuf;
+	int			wt_len;
+
+	int			is_write;
+	int			stop_hold;
+	int			speed;
+
+	int			data_buf[BUFSIZE];
+	int			cmd_buf[BUFSIZE];
+	int			cmd;
+
+	/* end of lock scope */
+	struct completion	trans_waitq;
+};
+
+static inline unsigned short jz4780_i2c_readw(struct jz4780_i2c *i2c,
+					      unsigned long offset)
+{
+	return readw(i2c->iomem + offset);
+}
+
+static inline void jz4780_i2c_writew(struct jz4780_i2c *i2c,
+				     unsigned long offset, unsigned short val)
+{
+	writew(val, i2c->iomem + offset);
+}
+
+static int jz4780_i2c_disable(struct jz4780_i2c *i2c)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 0);
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
+		if (!(regval & JZ4780_I2C_ENB_I2C))
+			return 0;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	dev_err(&i2c->adap.dev, "disable failed: ENSTA=0x%04x\n", regval);
+	return -ETIMEDOUT;
+}
+
+static int jz4780_i2c_enable(struct jz4780_i2c *i2c)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 1);
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
+		if (regval & JZ4780_I2C_ENB_I2C)
+			return 0;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	dev_err(&i2c->adap.dev, "enable failed: ENSTA=0x%04x\n", regval);
+	return -ETIMEDOUT;
+}
+
+static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+		if ((regval & JZ4780_I2C_STA_TFE) &&
+		    !(regval & JZ4780_I2C_STA_MSTACT))
+			break;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	if (loops) {
+		jz4780_i2c_writew(i2c, JZ4780_I2C_TAR, address);
+		return 0;
+	}
+
+	dev_err(&i2c->adap.dev,
+		"set device to address 0x%02x failed, STA=0x%04x\n",
+		address, regval);
+
+	return -ENXIO;
+}
+
+static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c)
+{
+	int dev_clk_khz = clk_get_rate(i2c->clk) / 1000;
+	int cnt_high = 0;	/* HIGH period count of the SCL clock */
+	int cnt_low = 0;	/* LOW period count of the SCL clock */
+	int cnt_period = 0;	/* period count of the SCL clock */
+	int setup_time = 0;
+	int hold_time = 0;
+	unsigned short tmp = 0;
+	int i2c_clk = i2c->speed;
+
+	if (jz4780_i2c_disable(i2c))
+		dev_dbg(&i2c->adap.dev, "i2c not disabled\n");
+
+	/*
+	 * 1 JZ4780_I2C cycle equals to cnt_period PCLK(i2c_clk)
+	 * standard mode, min LOW and HIGH period are 4700 ns and 4000 ns
+	 * fast mode, min LOW and HIGH period are 1300 ns and 600 ns
+	 */
+	cnt_period = dev_clk_khz / i2c_clk;
+
+	if (i2c_clk <= 100)
+		cnt_high = (cnt_period * 4000) / (4700 + 4000);
+	else
+		cnt_high = (cnt_period * 600) / (1300 + 600);
+
+	cnt_low = cnt_period - cnt_high;
+
+	/*
+	 * NOTE: JZ4780_I2C_CTRL_REST can't set when i2c enabled, because
+	 * normal read are 2 messages, we cannot disable i2c controller
+	 * between these two messages, this means that we must always set
+	 * JZ4780_I2C_CTRL_REST when init JZ4780_I2C_CTRL
+	 *
+	 */
+	if (i2c_clk <= 100) {
+		tmp = JZ4780_I2C_CTRL_SPDS | JZ4780_I2C_CTRL_REST
+		      | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SHCNT,
+				  JZ4780_I2CSHCNT_ADJUST(cnt_high));
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SLCNT,
+				  JZ4780_I2CSLCNT_ADJUST(cnt_low));
+	} else {
+		tmp = JZ4780_I2C_CTRL_SPDF | JZ4780_I2C_CTRL_REST
+		      | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+		jz4780_i2c_writew(i2c, JZ4780_I2C_FHCNT,
+				  JZ4780_I2CFHCNT_ADJUST(cnt_high));
+		jz4780_i2c_writew(i2c, JZ4780_I2C_FLCNT,
+				  JZ4780_I2CFLCNT_ADJUST(cnt_low));
+	}
+
+	/*
+	 * a i2c device must internally provide a hold time at least 300ns
+	 * tHD:DAT
+	 *	Standard Mode: min=300ns, max=3450ns
+	 *	Fast Mode: min=0ns, max=900ns
+	 * tSU:DAT
+	 *	Standard Mode: min=250ns, max=infinite
+	 *	Fast Mode: min=100(250ns is recommended), max=infinite
+	 *
+	 * 1i2c_clk = 10^6 / dev_clk_khz
+	 * on FPGA, dev_clk_khz = 12000, so 1i2c_clk = 1000/12 = 83ns
+	 * on Pisces(1008M), dev_clk_khz=126000, so 1i2c_clk = 1000 / 126 = 8ns
+	 *
+	 * The actual hold time is (SDAHD + 1) * (i2c_clk period).
+	 *
+	 * Length of setup time calculated using (SDASU - 1) * (ic_clk_period)
+	 *
+	 */
+	if (i2c_clk <= 100) { /* standard mode */
+		setup_time = 300;
+		hold_time = 400;
+	} else {
+		setup_time = 450;
+		hold_time = 450;
+	}
+
+	hold_time = ((hold_time * dev_clk_khz) / 1000000) - 1;
+	setup_time = ((setup_time * dev_clk_khz) / 1000000)  + 1;
+
+	if (setup_time > 255)
+		setup_time = 255;
+
+	if (setup_time <= 0)
+		setup_time = 1;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_SDASU, setup_time);
+
+	if (hold_time > 255)
+		hold_time = 255;
+
+	if (hold_time >= 0) {
+		/*i2c hold time enable */
+		hold_time |= JZ4780_I2C_SDAHD_HDENB;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
+	} else {
+		/* disable hold time */
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
+	}
+
+	return 0;
+}
+
+static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c)
+{
+	int ret;
+	unsigned long flags;
+	unsigned short tmp;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	/* can send stop now if need */
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	/* disable all interrupts first */
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
+
+	/* then clear all interrupts */
+	jz4780_i2c_readw(i2c, JZ4780_I2C_CTXABRT);
+	jz4780_i2c_readw(i2c, JZ4780_I2C_CINTR);
+
+	/* then disable the controller */
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_ENB_I2C;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+	udelay(10);
+	tmp |= JZ4780_I2C_ENB_I2C;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	ret = jz4780_i2c_disable(i2c);
+	if (ret)
+		dev_err(&i2c->adap.dev,
+			"unable to disable device during cleanup!\n");
+
+	if (unlikely(jz4780_i2c_readw(i2c, JZ4780_I2C_INTM)
+		     & jz4780_i2c_readw(i2c, JZ4780_I2C_INTST)))
+		dev_err(&i2c->adap.dev,
+			"device has interrupts after a complete cleanup!\n");
+
+	return ret;
+}
+
+static int jz4780_i2c_prepare(struct jz4780_i2c *i2c)
+{
+	jz4780_i2c_set_speed(i2c);
+	return jz4780_i2c_enable(i2c);
+}
+
+static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count)
+{
+	int i;
+
+	for (i = 0; i < cmd_count; i++)
+		jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
+}
+
+static void jz4780_i2c_trans_done(struct jz4780_i2c *i2c)
+{
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
+	complete(&i2c->trans_waitq);
+}
+
+static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
+{
+	unsigned short tmp;
+	unsigned short intst;
+	unsigned short intmsk;
+	struct jz4780_i2c *i2c = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
+	intst = jz4780_i2c_readw(i2c, JZ4780_I2C_INTST);
+
+	intst &= intmsk;
+
+	if (intst & JZ4780_I2C_INTST_TXABT) {
+		jz4780_i2c_trans_done(i2c);
+		goto done;
+	}
+
+	if (intst & JZ4780_I2C_INTST_RXOF) {
+		dev_dbg(&i2c->adap.dev, "received fifo overflow!\n");
+		jz4780_i2c_trans_done(i2c);
+		goto done;
+	}
+
+	/*
+	 * When reading, always drain RX FIFO before we send more Read
+	 * Commands to avoid fifo overrun
+	 */
+	if (i2c->is_write == 0) {
+		int rd_left;
+
+		while ((jz4780_i2c_readw(i2c, JZ4780_I2C_STA)
+				  & JZ4780_I2C_STA_RFNE)) {
+			*(i2c->rbuf++) = jz4780_i2c_readw(i2c, JZ4780_I2C_DC)
+					 & 0xff;
+			i2c->rd_data_xfered++;
+			if (i2c->rd_data_xfered == i2c->rd_total_len) {
+				jz4780_i2c_trans_done(i2c);
+				goto done;
+			}
+		}
+
+		rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
+
+		if (rd_left <= JZ4780_I2C_FIFO_LEN)
+			jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
+	}
+
+	if (intst & JZ4780_I2C_INTST_TXEMP) {
+		if (i2c->is_write == 0) {
+			int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
+			int max_send = (JZ4780_I2C_FIFO_LEN - 1)
+					 - (i2c->rd_cmd_xfered
+					 - i2c->rd_data_xfered);
+			int cmd_to_send = min(cmd_left, max_send);
+
+			if (i2c->rd_cmd_xfered != 0)
+				cmd_to_send = min(cmd_to_send,
+						  JZ4780_I2C_FIFO_LEN
+						  - TX_LEVEL - 1);
+
+			if (cmd_to_send) {
+				jz4780_i2c_send_rcmd(i2c, cmd_to_send);
+				i2c->rd_cmd_xfered += cmd_to_send;
+			}
+
+			cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
+			if (cmd_left == 0) {
+				intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
+				intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
+
+				tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+				tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+			}
+		} else {
+			unsigned short data;
+			unsigned short i2c_sta;
+
+			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+
+			while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
+			       (i2c->wt_len > 0)) {
+				i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+				data = *i2c->wbuf;
+				data &= ~JZ4780_I2C_DC_READ;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
+						  data);
+				i2c->wbuf++;
+				i2c->wt_len--;
+			}
+
+			if (i2c->wt_len == 0) {
+				if (!i2c->stop_hold) {
+					tmp = jz4780_i2c_readw(i2c,
+							       JZ4780_I2C_CTRL);
+					tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+					jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
+							  tmp);
+				}
+
+				jz4780_i2c_trans_done(i2c);
+				goto done;
+			}
+		}
+	}
+
+done:
+	spin_unlock_irqrestore(&i2c->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src)
+{
+	int i;
+
+	dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src);
+	dev_err(&i2c->adap.dev, "device addr=%x\n",
+		jz4780_i2c_readw(i2c, JZ4780_I2C_TAR));
+	dev_err(&i2c->adap.dev, "send cmd count:%d  %d\n",
+		i2c->cmd, i2c->cmd_buf[i2c->cmd]);
+	dev_err(&i2c->adap.dev, "receive data count:%d  %d\n",
+		i2c->cmd, i2c->data_buf[i2c->cmd]);
+
+	for (i = 0; i < 16; i++) {
+		if (src & BIT(i))
+			dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n",
+				i, jz4780_i2c_abrt_src[i]);
+	}
+}
+
+static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
+				       unsigned char *buf, int len, int cnt,
+				       int idx)
+{
+	int ret = 0;
+	long timeout;
+	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
+	unsigned short tmp;
+	unsigned long flags;
+
+	memset(buf, 0, len);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	i2c->stop_hold = 0;
+	i2c->is_write = 0;
+	i2c->rbuf = buf;
+	i2c->rd_total_len = len;
+	i2c->rd_data_xfered = 0;
+	i2c->rd_cmd_xfered = 0;
+
+	if (len <= JZ4780_I2C_FIFO_LEN)
+		jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
+	else
+		jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
+			  JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
+			  | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp |= JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
+					      msecs_to_jiffies(wait_time));
+
+	if (!timeout) {
+		dev_err(&i2c->adap.dev, "irq read timeout\n");
+		dev_dbg(&i2c->adap.dev, "send cmd count:%d  %d\n",
+			i2c->cmd, i2c->cmd_buf[i2c->cmd]);
+		dev_dbg(&i2c->adap.dev, "receive data count:%d  %d\n",
+			i2c->cmd, i2c->data_buf[i2c->cmd]);
+		ret = -EIO;
+	}
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
+	if (tmp) {
+		jz4780_i2c_txabrt(i2c, tmp);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
+					unsigned char *buf, int len,
+					int cnt, int idx)
+{
+	int ret = 0;
+	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
+	long timeout;
+	unsigned short tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	if (idx < (cnt - 1))
+		i2c->stop_hold = 1;
+	else
+		i2c->stop_hold = 0;
+
+	i2c->is_write = 1;
+	i2c->wbuf = buf;
+	i2c->wt_len = len;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
+					| JZ4780_I2C_INTM_MTXABT);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp |= JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
+					      msecs_to_jiffies(wait_time));
+	if (timeout && !i2c->stop_hold) {
+		unsigned short i2c_sta;
+		int write_in_process;
+
+		timeout = JZ4780_I2C_TIMEOUT * 100;
+		for (; timeout > 0; timeout--) {
+			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+
+			write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) ||
+				!(i2c_sta & JZ4780_I2C_STA_TFE);
+			if (!write_in_process)
+				break;
+			udelay(10);
+		}
+	}
+
+	if (!timeout) {
+		dev_err(&i2c->adap.dev, "write wait timeout\n");
+		ret = -EIO;
+	}
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
+	if (tmp) {
+		jz4780_i2c_txabrt(i2c, tmp);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int jz4780_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+			   int count)
+{
+	int i = -EIO;
+	int ret = 0;
+	struct jz4780_i2c *i2c = adap->algo_data;
+
+	ret = jz4780_i2c_prepare(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "I2C prepare failed\n");
+		goto out;
+	}
+
+	if (msg->addr != jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)) {
+		ret = jz4780_i2c_set_target(i2c, msg->addr);
+		if (ret)
+			goto out;
+	}
+	for (i = 0; i < count; i++, msg++) {
+		if (msg->flags & I2C_M_RD)
+			ret = jz4780_i2c_xfer_read(i2c, msg->buf, msg->len,
+						   count, i);
+		else
+			ret = jz4780_i2c_xfer_write(i2c, msg->buf, msg->len,
+						    count, i);
+
+		if (ret)
+			goto out;
+	}
+
+	ret = i;
+
+out:
+	jz4780_i2c_cleanup(i2c);
+	return ret;
+}
+
+static u32 jz4780_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm jz4780_i2c_algorithm = {
+	.master_xfer	= jz4780_i2c_xfer,
+	.functionality	= jz4780_i2c_functionality,
+};
+
+static const struct of_device_id jz4780_i2c_of_matches[] = {
+	{ .compatible = "ingenic,jz4780-i2c", },
+	{ /* sentinel */ }
+};
+
+static int jz4780_i2c_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	unsigned int clk_freq = 0;
+	unsigned short tmp;
+	struct resource *r;
+	struct jz4780_i2c *i2c;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->adap.owner		= THIS_MODULE;
+	i2c->adap.algo		= &jz4780_i2c_algorithm;
+	i2c->adap.algo_data	= i2c;
+	i2c->adap.retries	= 5;
+	i2c->adap.dev.parent	= &pdev->dev;
+	i2c->adap.dev.of_node	= pdev->dev.of_node;
+	sprintf(i2c->adap.name, "%s", pdev->name);
+
+	init_completion(&i2c->trans_waitq);
+	spin_lock_init(&i2c->lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->iomem = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(i2c->iomem))
+		return PTR_ERR(i2c->iomem);
+
+	platform_set_drvdata(pdev, i2c);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return PTR_ERR(i2c->clk);
+
+	clk_prepare_enable(i2c->clk);
+
+	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				 &clk_freq)) {
+		dev_err(&pdev->dev, "clock-frequency not specified in DT");
+		return clk_freq;
+	}
+
+	i2c->speed = clk_freq / 1000;
+	jz4780_i2c_set_speed(i2c);
+
+	dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
+
+	i2c->cmd = 0;
+	memset(i2c->cmd_buf, 0, BUFSIZE);
+	memset(i2c->data_buf, 0, BUFSIZE);
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
+			       dev_name(&pdev->dev), i2c);
+	if (ret) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to add bus\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int jz4780_i2c_remove(struct platform_device *pdev)
+{
+	struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i2c->clk);
+	i2c_del_adapter(&i2c->adap);
+	return 0;
+}
+
+static struct platform_driver jz4780_i2c_driver = {
+	.probe		= jz4780_i2c_probe,
+	.remove		= jz4780_i2c_remove,
+	.driver		= {
+		.name	= "jz4780-i2c",
+		.of_match_table = of_match_ptr(jz4780_i2c_of_matches),
+	},
+};
+
+module_platform_driver(jz4780_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ztyan<ztyan@ingenic.cn>");
+MODULE_DESCRIPTION("i2c driver for JZ4780 SoCs");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index c74cc2be613b..48ecffecc0ed 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 
 #include <asm/mpc52xx.h>
+#include <asm/mpc85xx.h>
 #include <sysdev/fsl_soc.h>
 
 #define DRV_NAME "mpc-i2c"
@@ -95,8 +96,9 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 		i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
 		writeb(0, i2c->base + MPC_I2C_SR);
 		wake_up(&i2c->queue);
+		return IRQ_HANDLED;
 	}
-	return IRQ_HANDLED;
+	return IRQ_NONE;
 }
 
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
@@ -346,6 +348,33 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void)
 	return val;
 }
 
+static u32 mpc_i2c_get_prescaler_8xxx(void)
+{
+	/* mpc83xx and mpc82xx all have prescaler 1 */
+	u32 prescaler = 1;
+
+	/* mpc85xx */
+	if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)
+		|| pvr_version_is(PVR_VER_E500MC)
+		|| pvr_version_is(PVR_VER_E5500)
+		|| pvr_version_is(PVR_VER_E6500)) {
+		unsigned int svr = mfspr(SPRN_SVR);
+
+		if ((SVR_SOC_VER(svr) == SVR_8540)
+			|| (SVR_SOC_VER(svr) == SVR_8541)
+			|| (SVR_SOC_VER(svr) == SVR_8560)
+			|| (SVR_SOC_VER(svr) == SVR_8555)
+			|| (SVR_SOC_VER(svr) == SVR_8610))
+			/* the above 85xx SoCs have prescaler 1 */
+			prescaler = 1;
+		else
+			/* all the other 85xx have prescaler 2 */
+			prescaler = 2;
+	}
+
+	return prescaler;
+}
+
 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
 					  u32 prescaler, u32 *real_clk)
 {
@@ -363,7 +392,7 @@ static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
 	if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
 		prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
 	if (!prescaler)
-		prescaler = 1;
+		prescaler = mpc_i2c_get_prescaler_8xxx();
 
 	divider = fsl_get_sys_freq() / clock / prescaler;
 
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index ff8b12c8d25f..56fceff6ba14 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -568,6 +568,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	int ret;
 	int flags;
 	int use_pio = 0;
+	unsigned long time_left;
 
 	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 
@@ -599,9 +600,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		if (ret)
 			return ret;
 
-		ret = wait_for_completion_timeout(&i2c->cmd_complete,
+		time_left = wait_for_completion_timeout(&i2c->cmd_complete,
 						msecs_to_jiffies(1000));
-		if (ret == 0)
+		if (!time_left)
 			goto timeout;
 
 		ret = i2c->cmd_err;
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 97998946c4f6..bcd17e8cbcb4 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -446,9 +446,9 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
  */
 static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
 {
-	u32 status = 0;
+	int status = 0;
 	u32 mcr, irq_mask;
-	int timeout;
+	unsigned long timeout;
 
 	mcr = load_i2c_mcr_reg(dev, flags);
 	writel(mcr, dev->virtbase + I2C_MCR);
@@ -517,7 +517,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
 {
 	u32 status = 0;
 	u32 mcr, irq_mask;
-	int timeout;
+	unsigned long timeout;
 
 	mcr = load_i2c_mcr_reg(dev, flags);
 
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
index 16f90b1a7508..75dd6d041241 100644
--- a/drivers/i2c/busses/i2c-opal.c
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -104,18 +104,8 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
 		break;
 	case 2:
-		/* For two messages, we basically support only simple
-		 * smbus transactions of a write plus a read. We might
-		 * want to allow also two writes but we'd have to bounce
-		 * the data into a single buffer.
-		 */
-		if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
-			return -EOPNOTSUPP;
-		if (msgs[0].len > 4)
-			return -EOPNOTSUPP;
-		if (msgs[0].addr != msgs[1].addr)
-			return -EOPNOTSUPP;
-		req.type = OPAL_I2C_SM_READ;
+		req.type = (msgs[1].flags & I2C_M_RD) ?
+			OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
 		req.addr = cpu_to_be16(msgs[0].addr);
 		req.subaddr_sz = msgs[0].len;
 		for (i = 0; i < msgs[0].len; i++)
@@ -210,6 +200,15 @@ static const struct i2c_algorithm i2c_opal_algo = {
 	.functionality	= i2c_opal_func,
 };
 
+/*
+ * For two messages, we basically support simple smbus transactions of a
+ * write-then-anything.
+ */
+static struct i2c_adapter_quirks i2c_opal_quirks = {
+	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+	.max_comb_1st_msg_len = 4,
+};
+
 static int i2c_opal_probe(struct platform_device *pdev)
 {
 	struct i2c_adapter	*adapter;
@@ -232,6 +231,7 @@ static int i2c_opal_probe(struct platform_device *pdev)
 
 	adapter->algo = &i2c_opal_algo;
 	adapter->algo_data = (void *)(unsigned long)opal_id;
+	adapter->quirks = &i2c_opal_quirks;
 	adapter->dev.parent = &pdev->dev;
 	adapter->dev.of_node = of_node_get(pdev->dev.of_node);
 	pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index d37d9db6681e..2c40edbf6224 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -456,14 +456,6 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
 		return -EINVAL;
 	}
 
-	if (cmd->read_len > MSP_MAX_BYTES_PER_RW ||
-	    cmd->write_len > MSP_MAX_BYTES_PER_RW) {
-		dev_err(&pmcmsptwi_adapter.dev,
-			"%s: Cannot transfer more than %d bytes\n",
-			__func__, MSP_MAX_BYTES_PER_RW);
-		return -EINVAL;
-	}
-
 	mutex_lock(&data->lock);
 	dev_dbg(&pmcmsptwi_adapter.dev,
 		"Setting address to 0x%04x\n", cmd->addr);
@@ -520,25 +512,14 @@ static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
 	struct pmcmsptwi_cfg oldcfg, newcfg;
 	int ret;
 
-	if (num > 2) {
-		dev_dbg(&adap->dev, "%d messages unsupported\n", num);
-		return -EINVAL;
-	} else if (num == 2) {
-		/* Check for a dual write-then-read command */
+	if (num == 2) {
 		struct i2c_msg *nextmsg = msg + 1;
-		if (!(msg->flags & I2C_M_RD) &&
-		    (nextmsg->flags & I2C_M_RD) &&
-		    msg->addr == nextmsg->addr) {
-			cmd.type = MSP_TWI_CMD_WRITE_READ;
-			cmd.write_len = msg->len;
-			cmd.write_data = msg->buf;
-			cmd.read_len = nextmsg->len;
-			cmd.read_data = nextmsg->buf;
-		} else {
-			dev_dbg(&adap->dev,
-				"Non write-read dual messages unsupported\n");
-			return -EINVAL;
-		}
+
+		cmd.type = MSP_TWI_CMD_WRITE_READ;
+		cmd.write_len = msg->len;
+		cmd.write_data = msg->buf;
+		cmd.read_len = nextmsg->len;
+		cmd.read_data = nextmsg->buf;
 	} else if (msg->flags & I2C_M_RD) {
 		cmd.type = MSP_TWI_CMD_READ;
 		cmd.read_len = msg->len;
@@ -598,6 +579,14 @@ static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
 		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL;
 }
 
+static struct i2c_adapter_quirks pmcmsptwi_i2c_quirks = {
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+	.max_write_len = MSP_MAX_BYTES_PER_RW,
+	.max_read_len = MSP_MAX_BYTES_PER_RW,
+	.max_comb_1st_msg_len = MSP_MAX_BYTES_PER_RW,
+	.max_comb_2nd_msg_len = MSP_MAX_BYTES_PER_RW,
+};
+
 /* -- Initialization -- */
 
 static struct i2c_algorithm pmcmsptwi_algo = {
@@ -609,6 +598,7 @@ static struct i2c_adapter pmcmsptwi_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &pmcmsptwi_algo,
+	.quirks		= &pmcmsptwi_i2c_quirks,
 	.name		= DRV_NAME,
 };
 
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 60a53c169ed2..6abcf696e359 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -153,12 +153,6 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	int			read;
 	int			addrdir;
 
-	if (num != 1) {
-		dev_err(&adap->dev,
-			"Multi-message I2C transactions not supported\n");
-		return -EOPNOTSUPP;
-	}
-
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
@@ -205,6 +199,9 @@ static const struct i2c_algorithm i2c_powermac_algorithm = {
 	.functionality	= i2c_powermac_func,
 };
 
+static struct i2c_adapter_quirks i2c_powermac_quirks = {
+	.max_num_msgs = 1,
+};
 
 static int i2c_powermac_remove(struct platform_device *dev)
 {
@@ -434,6 +431,7 @@ static int i2c_powermac_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, adapter);
 	adapter->algo = &i2c_powermac_algorithm;
+	adapter->quirks = &i2c_powermac_quirks;
 	i2c_set_adapdata(adapter, bus);
 	adapter->dev.parent = &dev->dev;
 
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 4dad23bdffbe..fdcbdab808e9 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -412,17 +412,6 @@ static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 	unsigned long left;
 	int ret;
 
-	/*
-	 * The QUP block will issue a NACK and STOP on the bus when reaching
-	 * the end of the read, the length of the read is specified as one byte
-	 * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
-	 */
-	if (msg->len > QUP_READ_LIMIT) {
-		dev_err(qup->dev, "HW not capable of reads over %d bytes\n",
-			QUP_READ_LIMIT);
-		return -EINVAL;
-	}
-
 	qup->msg = msg;
 	qup->pos  = 0;
 
@@ -534,6 +523,15 @@ static const struct i2c_algorithm qup_i2c_algo = {
 	.functionality	= qup_i2c_func,
 };
 
+/*
+ * The QUP block will issue a NACK and STOP on the bus when reaching
+ * the end of the read, the length of the read is specified as one byte
+ * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
+ */
+static struct i2c_adapter_quirks qup_i2c_quirks = {
+	.max_read_len = QUP_READ_LIMIT,
+};
+
 static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
 {
 	clk_prepare_enable(qup->clk);
@@ -670,6 +668,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
 
 	i2c_set_adapdata(&qup->adap, qup);
 	qup->adap.algo = &qup_i2c_algo;
+	qup->adap.quirks = &qup_i2c_quirks;
 	qup->adap.dev.parent = qup->dev;
 	qup->adap.dev.of_node = pdev->dev.of_node;
 	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 71a6e07eb7ab..5a84bea5b845 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -382,11 +382,11 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
 	if (ssr_filtered & SAR) {
 		/* read or write request */
 		if (ssr_raw & STM) {
-			i2c_slave_event(priv->slave, I2C_SLAVE_REQ_READ_START, &value);
+			i2c_slave_event(priv->slave, I2C_SLAVE_READ_REQUESTED, &value);
 			rcar_i2c_write(priv, ICRXTX, value);
 			rcar_i2c_write(priv, ICSIER, SDE | SSR | SAR);
 		} else {
-			i2c_slave_event(priv->slave, I2C_SLAVE_REQ_WRITE_START, &value);
+			i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED, &value);
 			rcar_i2c_read(priv, ICRXTX);	/* dummy read */
 			rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
 		}
@@ -406,17 +406,15 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
 		int ret;
 
 		value = rcar_i2c_read(priv, ICRXTX);
-		ret = i2c_slave_event(priv->slave, I2C_SLAVE_REQ_WRITE_END, &value);
+		ret = i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_RECEIVED, &value);
 		/* Send NACK in case of error */
 		rcar_i2c_write(priv, ICSCR, SIE | SDBS | (ret < 0 ? FNA : 0));
-		i2c_slave_event(priv->slave, I2C_SLAVE_REQ_WRITE_START, &value);
 		rcar_i2c_write(priv, ICSSR, ~SDR & 0xff);
 	}
 
 	/* master wants to read from us */
 	if (ssr_filtered & SDE) {
-		i2c_slave_event(priv->slave, I2C_SLAVE_REQ_READ_END, &value);
-		i2c_slave_event(priv->slave, I2C_SLAVE_REQ_READ_START, &value);
+		i2c_slave_event(priv->slave, I2C_SLAVE_READ_PROCESSED, &value);
 		rcar_i2c_write(priv, ICRXTX, value);
 		rcar_i2c_write(priv, ICSSR, ~SDE & 0xff);
 	}
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 29f14331dd9d..1bcd75ea0b4c 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -532,7 +532,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 {
 	u32 packet_header;
 	u32 int_mask;
-	int ret;
+	unsigned long time_left;
 
 	tegra_i2c_flush_fifos(i2c_dev);
 
@@ -585,18 +585,20 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
 		i2c_readl(i2c_dev, I2C_INT_MASK));
 
-	ret = wait_for_completion_timeout(&i2c_dev->msg_complete, TEGRA_I2C_TIMEOUT);
+	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
+						TEGRA_I2C_TIMEOUT);
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
 
-	if (ret == 0) {
+	if (time_left == 0) {
 		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
 
 		tegra_i2c_init(i2c_dev);
 		return -ETIMEDOUT;
 	}
 
-	dev_dbg(i2c_dev->dev, "transfer complete: %d %d %d\n",
-		ret, completion_done(&i2c_dev->msg_complete), i2c_dev->msg_err);
+	dev_dbg(i2c_dev->dev, "transfer complete: %lu %d %d\n",
+		time_left, completion_done(&i2c_dev->msg_complete),
+		i2c_dev->msg_err);
 
 	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
 		return 0;
diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
index 7533fa34d737..47e88adf2011 100644
--- a/drivers/i2c/busses/i2c-viperboard.c
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -288,10 +288,6 @@ static int vprbrd_i2c_xfer(struct i2c_adapter *i2c, struct i2c_msg *msgs,
 			i, pmsg->flags & I2C_M_RD ? "read" : "write",
 			pmsg->flags, pmsg->len, pmsg->addr);
 
-		/* msgs longer than 2048 bytes are not supported by adapter */
-		if (pmsg->len > 2048)
-			return -EINVAL;
-
 		mutex_lock(&vb->lock);
 		/* directly send the message */
 		if (pmsg->flags & I2C_M_RD) {
@@ -358,6 +354,11 @@ static const struct i2c_algorithm vprbrd_algorithm = {
 	.functionality	= vprbrd_i2c_func,
 };
 
+static struct i2c_adapter_quirks vprbrd_quirks = {
+	.max_read_len = 2048,
+	.max_write_len = 2048,
+};
+
 static int vprbrd_i2c_probe(struct platform_device *pdev)
 {
 	struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
@@ -373,6 +374,7 @@ static int vprbrd_i2c_probe(struct platform_device *pdev)
 	vb_i2c->i2c.owner = THIS_MODULE;
 	vb_i2c->i2c.class = I2C_CLASS_HWMON;
 	vb_i2c->i2c.algo = &vprbrd_algorithm;
+	vb_i2c->i2c.quirks = &vprbrd_quirks;
 	vb_i2c->i2c.algo_data = vb;
 	/* save the param in usb capabable memory */
 	vb_i2c->bus_freq_param = i2c_bus_param;
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
index 82ea34925489..e1e3a85596c5 100644
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -128,7 +128,8 @@ static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
 {
 	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
 	u16 val, tcr_val;
-	int ret, wait_result;
+	int ret;
+	unsigned long wait_result;
 	int xfer_len = 0;
 
 	if (!(pmsg->flags & I2C_M_NOSTART)) {
@@ -177,7 +178,7 @@ static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
 
 	while (xfer_len < pmsg->len) {
 		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
-							  500 * HZ / 1000);
+							msecs_to_jiffies(500));
 
 		if (wait_result == 0)
 			return -ETIMEDOUT;
@@ -218,7 +219,8 @@ static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
 {
 	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
 	u16 val, tcr_val;
-	int ret, wait_result;
+	int ret;
+	unsigned long wait_result;
 	u32 xfer_len = 0;
 
 	if (!(pmsg->flags & I2C_M_NOSTART)) {
@@ -266,7 +268,7 @@ static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
 
 	while (xfer_len < pmsg->len) {
 		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
-							  500 * HZ / 1000);
+							msecs_to_jiffies(500));
 
 		if (!wait_result)
 			return -ETIMEDOUT;
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
new file mode 100644
index 000000000000..c941418f06f5
--- /dev/null
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (c) 2003-2015 Broadcom Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define XLP9XX_I2C_DIV			0x0
+#define XLP9XX_I2C_CTRL			0x1
+#define XLP9XX_I2C_CMD			0x2
+#define XLP9XX_I2C_STATUS		0x3
+#define XLP9XX_I2C_MTXFIFO		0x4
+#define XLP9XX_I2C_MRXFIFO		0x5
+#define XLP9XX_I2C_MFIFOCTRL		0x6
+#define XLP9XX_I2C_STXFIFO		0x7
+#define XLP9XX_I2C_SRXFIFO		0x8
+#define XLP9XX_I2C_SFIFOCTRL		0x9
+#define XLP9XX_I2C_SLAVEADDR		0xA
+#define XLP9XX_I2C_OWNADDR		0xB
+#define XLP9XX_I2C_FIFOWCNT		0xC
+#define XLP9XX_I2C_INTEN		0xD
+#define XLP9XX_I2C_INTST		0xE
+#define XLP9XX_I2C_WAITCNT		0xF
+#define XLP9XX_I2C_TIMEOUT		0X10
+#define XLP9XX_I2C_GENCALLADDR		0x11
+
+#define XLP9XX_I2C_CMD_START		BIT(7)
+#define XLP9XX_I2C_CMD_STOP		BIT(6)
+#define XLP9XX_I2C_CMD_READ		BIT(5)
+#define XLP9XX_I2C_CMD_WRITE		BIT(4)
+#define XLP9XX_I2C_CMD_ACK		BIT(3)
+
+#define XLP9XX_I2C_CTRL_MCTLEN_SHIFT	16
+#define XLP9XX_I2C_CTRL_MCTLEN_MASK	0xffff0000
+#define XLP9XX_I2C_CTRL_RST		BIT(8)
+#define XLP9XX_I2C_CTRL_EN		BIT(6)
+#define XLP9XX_I2C_CTRL_MASTER		BIT(4)
+#define XLP9XX_I2C_CTRL_FIFORD		BIT(1)
+#define XLP9XX_I2C_CTRL_ADDMODE		BIT(0)
+
+#define XLP9XX_I2C_INTEN_NACKADDR	BIT(25)
+#define XLP9XX_I2C_INTEN_SADDR		BIT(13)
+#define XLP9XX_I2C_INTEN_DATADONE	BIT(12)
+#define XLP9XX_I2C_INTEN_ARLOST		BIT(11)
+#define XLP9XX_I2C_INTEN_MFIFOFULL	BIT(4)
+#define XLP9XX_I2C_INTEN_MFIFOEMTY	BIT(3)
+#define XLP9XX_I2C_INTEN_MFIFOHI	BIT(2)
+#define XLP9XX_I2C_INTEN_BUSERR		BIT(0)
+
+#define XLP9XX_I2C_MFIFOCTRL_HITH_SHIFT		8
+#define XLP9XX_I2C_MFIFOCTRL_LOTH_SHIFT		0
+#define XLP9XX_I2C_MFIFOCTRL_RST		BIT(16)
+
+#define XLP9XX_I2C_SLAVEADDR_RW			BIT(0)
+#define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT		1
+
+#define XLP9XX_I2C_IP_CLK_FREQ		133000000UL
+#define XLP9XX_I2C_DEFAULT_FREQ		100000
+#define XLP9XX_I2C_HIGH_FREQ		400000
+#define XLP9XX_I2C_FIFO_SIZE		0x80U
+#define XLP9XX_I2C_TIMEOUT_MS		1000
+
+#define XLP9XX_I2C_FIFO_WCNT_MASK	0xff
+#define XLP9XX_I2C_STATUS_ERRMASK	(XLP9XX_I2C_INTEN_ARLOST | \
+			XLP9XX_I2C_INTEN_NACKADDR | XLP9XX_I2C_INTEN_BUSERR)
+
+struct xlp9xx_i2c_dev {
+	struct device *dev;
+	struct i2c_adapter adapter;
+	struct completion msg_complete;
+	int irq;
+	bool msg_read;
+	u32 __iomem *base;
+	u32 msg_buf_remaining;
+	u32 msg_len;
+	u32 clk_hz;
+	u32 msg_err;
+	u8 *msg_buf;
+};
+
+static inline void xlp9xx_write_i2c_reg(struct xlp9xx_i2c_dev *priv,
+					unsigned long reg, u32 val)
+{
+	writel(val, priv->base + reg);
+}
+
+static inline u32 xlp9xx_read_i2c_reg(struct xlp9xx_i2c_dev *priv,
+				      unsigned long reg)
+{
+	return readl(priv->base + reg);
+}
+
+static void xlp9xx_i2c_mask_irq(struct xlp9xx_i2c_dev *priv, u32 mask)
+{
+	u32 inten;
+
+	inten = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTEN) & ~mask;
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, inten);
+}
+
+static void xlp9xx_i2c_unmask_irq(struct xlp9xx_i2c_dev *priv, u32 mask)
+{
+	u32 inten;
+
+	inten = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTEN) | mask;
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, inten);
+}
+
+static void xlp9xx_i2c_update_rx_fifo_thres(struct xlp9xx_i2c_dev *priv)
+{
+	u32 thres;
+
+	thres = min(priv->msg_buf_remaining, XLP9XX_I2C_FIFO_SIZE);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL,
+			     thres << XLP9XX_I2C_MFIFOCTRL_HITH_SHIFT);
+}
+
+static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv)
+{
+	u32 len, i;
+	u8 *buf = priv->msg_buf;
+
+	len = min(priv->msg_buf_remaining, XLP9XX_I2C_FIFO_SIZE);
+	for (i = 0; i < len; i++)
+		xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MTXFIFO, buf[i]);
+	priv->msg_buf_remaining -= len;
+	priv->msg_buf += len;
+}
+
+static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
+{
+	u32 len, i;
+	u8 *buf = priv->msg_buf;
+
+	len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
+				  XLP9XX_I2C_FIFO_WCNT_MASK;
+	len = min(priv->msg_buf_remaining, len);
+	for (i = 0; i < len; i++, buf++)
+		*buf = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO);
+
+	priv->msg_buf_remaining -= len;
+	priv->msg_buf = buf;
+
+	if (priv->msg_buf_remaining)
+		xlp9xx_i2c_update_rx_fifo_thres(priv);
+}
+
+static irqreturn_t xlp9xx_i2c_isr(int irq, void *dev_id)
+{
+	struct xlp9xx_i2c_dev *priv = dev_id;
+	u32 status;
+
+	status = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTST);
+	if (status == 0)
+		return IRQ_NONE;
+
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTST, status);
+	if (status & XLP9XX_I2C_STATUS_ERRMASK) {
+		priv->msg_err = status;
+		goto xfer_done;
+	}
+
+	/* SADDR ACK for SMBUS_QUICK */
+	if ((status & XLP9XX_I2C_INTEN_SADDR) && (priv->msg_len == 0))
+		goto xfer_done;
+
+	if (!priv->msg_read) {
+		if (status & XLP9XX_I2C_INTEN_MFIFOEMTY) {
+			/* TX FIFO got empty, fill it up again */
+			if (priv->msg_buf_remaining)
+				xlp9xx_i2c_fill_tx_fifo(priv);
+			else
+				xlp9xx_i2c_mask_irq(priv,
+						    XLP9XX_I2C_INTEN_MFIFOEMTY);
+		}
+	} else {
+		if (status & (XLP9XX_I2C_INTEN_DATADONE |
+			      XLP9XX_I2C_INTEN_MFIFOHI)) {
+			/* data is in FIFO, read it */
+			if (priv->msg_buf_remaining)
+				xlp9xx_i2c_drain_rx_fifo(priv);
+		}
+	}
+
+	/* Transfer complete */
+	if (status & XLP9XX_I2C_INTEN_DATADONE)
+		goto xfer_done;
+
+	return IRQ_HANDLED;
+
+xfer_done:
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0);
+	complete(&priv->msg_complete);
+	return IRQ_HANDLED;
+}
+
+static int xlp9xx_i2c_init(struct xlp9xx_i2c_dev *priv)
+{
+	u32 prescale;
+
+	/*
+	 * The controller uses 5 * SCL clock internally.
+	 * So prescale value should be divided by 5.
+	 */
+	prescale = DIV_ROUND_UP(XLP9XX_I2C_IP_CLK_FREQ, priv->clk_hz);
+	prescale = ((prescale - 8) / 5) - 1;
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_RST);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_EN |
+			     XLP9XX_I2C_CTRL_MASTER);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_DIV, prescale);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0);
+
+	return 0;
+}
+
+static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
+			       int last_msg)
+{
+	unsigned long timeleft;
+	u32 intr_mask, cmd, val;
+
+	priv->msg_buf = msg->buf;
+	priv->msg_buf_remaining = priv->msg_len = msg->len;
+	priv->msg_err = 0;
+	priv->msg_read = (msg->flags & I2C_M_RD);
+	reinit_completion(&priv->msg_complete);
+
+	/* Reset FIFO */
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL,
+			     XLP9XX_I2C_MFIFOCTRL_RST);
+
+	/* set FIFO threshold if reading */
+	if (priv->msg_read)
+		xlp9xx_i2c_update_rx_fifo_thres(priv);
+
+	/* set slave addr */
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_SLAVEADDR,
+			     (msg->addr << XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT) |
+			     (priv->msg_read ? XLP9XX_I2C_SLAVEADDR_RW : 0));
+
+	/* Build control word for transfer */
+	val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL);
+	if (!priv->msg_read)
+		val &= ~XLP9XX_I2C_CTRL_FIFORD;
+	else
+		val |= XLP9XX_I2C_CTRL_FIFORD;	/* read */
+
+	if (msg->flags & I2C_M_TEN)
+		val |= XLP9XX_I2C_CTRL_ADDMODE;	/* 10-bit address mode*/
+	else
+		val &= ~XLP9XX_I2C_CTRL_ADDMODE;
+
+	/* set data length to be transferred */
+	val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
+	      (msg->len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
+
+	/* fill fifo during tx */
+	if (!priv->msg_read)
+		xlp9xx_i2c_fill_tx_fifo(priv);
+
+	/* set interrupt mask */
+	intr_mask = (XLP9XX_I2C_INTEN_ARLOST | XLP9XX_I2C_INTEN_BUSERR |
+		     XLP9XX_I2C_INTEN_NACKADDR | XLP9XX_I2C_INTEN_DATADONE);
+
+	if (priv->msg_read) {
+		intr_mask |= XLP9XX_I2C_INTEN_MFIFOHI;
+		if (msg->len == 0)
+			intr_mask |= XLP9XX_I2C_INTEN_SADDR;
+	} else {
+		if (msg->len == 0)
+			intr_mask |= XLP9XX_I2C_INTEN_SADDR;
+		else
+			intr_mask |= XLP9XX_I2C_INTEN_MFIFOEMTY;
+	}
+	xlp9xx_i2c_unmask_irq(priv, intr_mask);
+
+	/* set cmd reg */
+	cmd = XLP9XX_I2C_CMD_START;
+	cmd |= (priv->msg_read ? XLP9XX_I2C_CMD_READ : XLP9XX_I2C_CMD_WRITE);
+	if (last_msg)
+		cmd |= XLP9XX_I2C_CMD_STOP;
+
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CMD, cmd);
+
+	timeleft = msecs_to_jiffies(XLP9XX_I2C_TIMEOUT_MS);
+	timeleft = wait_for_completion_timeout(&priv->msg_complete, timeleft);
+
+	if (priv->msg_err) {
+		dev_dbg(priv->dev, "transfer error %x!\n", priv->msg_err);
+		if (priv->msg_err & XLP9XX_I2C_INTEN_BUSERR)
+			xlp9xx_i2c_init(priv);
+		return -EIO;
+	}
+
+	if (timeleft == 0) {
+		dev_dbg(priv->dev, "i2c transfer timed out!\n");
+		xlp9xx_i2c_init(priv);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int xlp9xx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			   int num)
+{
+	int i, ret;
+	struct xlp9xx_i2c_dev *priv = i2c_get_adapdata(adap);
+
+	for (i = 0; i < num; i++) {
+		ret = xlp9xx_i2c_xfer_msg(priv, &msgs[i], i == num - 1);
+		if (ret != 0)
+			return ret;
+	}
+
+	return num;
+}
+
+static u32 xlp9xx_i2c_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C |
+		I2C_FUNC_10BIT_ADDR;
+}
+
+static struct i2c_algorithm xlp9xx_i2c_algo = {
+	.master_xfer = xlp9xx_i2c_xfer,
+	.functionality = xlp9xx_i2c_functionality,
+};
+
+static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
+				    struct xlp9xx_i2c_dev *priv)
+{
+	struct device_node *np = pdev->dev.of_node;
+	u32 freq;
+	int err;
+
+	err = of_property_read_u32(np, "clock-frequency", &freq);
+	if (err) {
+		freq = XLP9XX_I2C_DEFAULT_FREQ;
+		dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
+	} else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) {
+		dev_warn(&pdev->dev, "invalid frequency %u, using default\n",
+			 freq);
+		freq = XLP9XX_I2C_DEFAULT_FREQ;
+	}
+	priv->clk_hz = freq;
+
+	return 0;
+}
+
+static int xlp9xx_i2c_probe(struct platform_device *pdev)
+{
+	struct xlp9xx_i2c_dev *priv;
+	struct resource *res;
+	int err = 0;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq <= 0) {
+		dev_err(&pdev->dev, "invalid irq!\n");
+		return priv->irq;
+	}
+
+	xlp9xx_i2c_get_frequency(pdev, priv);
+	xlp9xx_i2c_init(priv);
+
+	err = devm_request_irq(&pdev->dev, priv->irq, xlp9xx_i2c_isr, 0,
+			       pdev->name, priv);
+	if (err) {
+		dev_err(&pdev->dev, "IRQ request failed!\n");
+		return err;
+	}
+
+	init_completion(&priv->msg_complete);
+	priv->adapter.dev.parent = &pdev->dev;
+	priv->adapter.algo = &xlp9xx_i2c_algo;
+	priv->adapter.dev.of_node = pdev->dev.of_node;
+	priv->dev = &pdev->dev;
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name), "xlp9xx-i2c");
+	i2c_set_adapdata(&priv->adapter, priv);
+
+	err = i2c_add_adapter(&priv->adapter);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add I2C adapter!\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr);
+
+	return 0;
+}
+
+static int xlp9xx_i2c_remove(struct platform_device *pdev)
+{
+	struct xlp9xx_i2c_dev *priv;
+
+	priv = platform_get_drvdata(pdev);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0);
+	synchronize_irq(priv->irq);
+	i2c_del_adapter(&priv->adapter);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, 0);
+
+	return 0;
+}
+
+static const struct of_device_id xlp9xx_i2c_of_match[] = {
+	{ .compatible = "netlogic,xlp980-i2c", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver xlp9xx_i2c_driver = {
+	.probe = xlp9xx_i2c_probe,
+	.remove = xlp9xx_i2c_remove,
+	.driver = {
+		.name = "xlp9xx-i2c",
+		.of_match_table = xlp9xx_i2c_of_match,
+	},
+};
+
+module_platform_driver(xlp9xx_i2c_driver);
+
+MODULE_AUTHOR("Subhendu Sekhar Behera <sbehera@broadcom.com>");
+MODULE_DESCRIPTION("XLP9XX/5XX I2C Bus Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index edf274cabe81..68f687733379 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -561,7 +561,7 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
 	int i = 0, val = 1, ret = 0;
 
 	if (bri->prepare_recovery)
-		bri->prepare_recovery(bri);
+		bri->prepare_recovery(adap);
 
 	/*
 	 * By this time SCL is high, as we need to give 9 falling-rising edges
@@ -586,7 +586,7 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
 	}
 
 	if (bri->unprepare_recovery)
-		bri->unprepare_recovery(bri);
+		bri->unprepare_recovery(adap);
 
 	return ret;
 }
@@ -1875,6 +1875,13 @@ static int __init i2c_init(void)
 {
 	int retval;
 
+	retval = of_alias_get_highest_id("i2c");
+
+	down_write(&__i2c_board_lock);
+	if (retval >= __i2c_first_dynamic_bus_num)
+		__i2c_first_dynamic_bus_num = retval + 1;
+	up_write(&__i2c_board_lock);
+
 	retval = bus_register(&i2c_bus_type);
 	if (retval)
 		return retval;
@@ -1926,6 +1933,65 @@ module_exit(i2c_exit);
  * ----------------------------------------------------
  */
 
+/* Check if val is exceeding the quirk IFF quirk is non 0 */
+#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
+
+static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
+{
+	dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
+			    err_msg, msg->addr, msg->len,
+			    msg->flags & I2C_M_RD ? "read" : "write");
+	return -EOPNOTSUPP;
+}
+
+static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	const struct i2c_adapter_quirks *q = adap->quirks;
+	int max_num = q->max_num_msgs, i;
+	bool do_len_check = true;
+
+	if (q->flags & I2C_AQ_COMB) {
+		max_num = 2;
+
+		/* special checks for combined messages */
+		if (num == 2) {
+			if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
+				return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
+
+			if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
+				return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
+
+			if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
+				return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
+
+			if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
+				return i2c_quirk_error(adap, &msgs[0], "msg too long");
+
+			if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
+				return i2c_quirk_error(adap, &msgs[1], "msg too long");
+
+			do_len_check = false;
+		}
+	}
+
+	if (i2c_quirk_exceeded(num, max_num))
+		return i2c_quirk_error(adap, &msgs[0], "too many messages");
+
+	for (i = 0; i < num; i++) {
+		u16 len = msgs[i].len;
+
+		if (msgs[i].flags & I2C_M_RD) {
+			if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
+				return i2c_quirk_error(adap, &msgs[i], "msg too long");
+		} else {
+			if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
+				return i2c_quirk_error(adap, &msgs[i], "msg too long");
+		}
+	}
+
+	return 0;
+}
+
 /**
  * __i2c_transfer - unlocked flavor of i2c_transfer
  * @adap: Handle to I2C bus
@@ -1943,6 +2009,9 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	unsigned long orig_jiffies;
 	int ret, try;
 
+	if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
+		return -EOPNOTSUPP;
+
 	/* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
 	 * enabled.  This is an efficient way of keeping the for-loop from
 	 * being executed when not needed.
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index cf9b09db092f..822374654609 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -36,7 +36,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 	struct eeprom_data *eeprom = i2c_get_clientdata(client);
 
 	switch (event) {
-	case I2C_SLAVE_REQ_WRITE_END:
+	case I2C_SLAVE_WRITE_RECEIVED:
 		if (eeprom->first_write) {
 			eeprom->buffer_idx = *val;
 			eeprom->first_write = false;
@@ -47,17 +47,23 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 		}
 		break;
 
-	case I2C_SLAVE_REQ_READ_START:
+	case I2C_SLAVE_READ_PROCESSED:
+		/* The previous byte made it to the bus, get next one */
+		eeprom->buffer_idx++;
+		/* fallthrough */
+	case I2C_SLAVE_READ_REQUESTED:
 		spin_lock(&eeprom->buffer_lock);
 		*val = eeprom->buffer[eeprom->buffer_idx];
 		spin_unlock(&eeprom->buffer_lock);
-		break;
-
-	case I2C_SLAVE_REQ_READ_END:
-		eeprom->buffer_idx++;
+		/*
+		 * Do not increment buffer_idx here, because we don't know if
+		 * this byte will be actually used. Read Linux I2C slave docs
+		 * for details.
+		 */
 		break;
 
 	case I2C_SLAVE_STOP:
+	case I2C_SLAVE_WRITE_REQUESTED:
 		eeprom->first_write = true;
 		break;
 
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index f5798eb4076b..70db99264339 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -76,10 +76,9 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
 		return -ENODEV;
 	}
 	adapter = of_find_i2c_adapter_by_node(adapter_np);
-	if (!adapter) {
-		dev_err(&pdev->dev, "Cannot find parent bus\n");
+	if (!adapter)
 		return -EPROBE_DEFER;
-	}
+
 	mux->data.parent = i2c_adapter_id(adapter);
 	put_device(&adapter->dev);
 
@@ -177,11 +176,8 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 	}
 
 	parent = i2c_get_adapter(mux->data.parent);
-	if (!parent) {
-		dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
-			mux->data.parent);
+	if (!parent)
 		return -EPROBE_DEFER;
-	}
 
 	mux->parent = parent;
 	mux->gpio_base = gpio_base;
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 3d8f4fe2e47e..bea0d2de2993 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -204,9 +204,9 @@ static int pca954x_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, data);
 
 	/* Get the mux out of reset if a reset GPIO is specified. */
-	gpio = devm_gpiod_get(&client->dev, "reset");
-	if (!IS_ERR(gpio))
-		gpiod_direction_output(gpio, 0);
+	gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
 
 	/* Write the mux register at addr to verify
 	 * that the mux is in fact present. This also
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 8f165b112e03..4cc06c702c41 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1960,6 +1960,32 @@ int of_alias_get_id(struct device_node *np, const char *stem)
 }
 EXPORT_SYMBOL_GPL(of_alias_get_id);
 
+/**
+ * of_alias_get_highest_id - Get highest alias id for the given stem
+ * @stem:	Alias stem to be examined
+ *
+ * The function travels the lookup table to get the highest alias id for the
+ * given alias stem.  It returns the alias id if found.
+ */
+int of_alias_get_highest_id(const char *stem)
+{
+	struct alias_prop *app;
+	int id = -ENODEV;
+
+	mutex_lock(&of_mutex);
+	list_for_each_entry(app, &aliases_lookup, link) {
+		if (strcmp(app->stem, stem) != 0)
+			continue;
+
+		if (app->id > id)
+			id = app->id;
+	}
+	mutex_unlock(&of_mutex);
+
+	return id;
+}
+EXPORT_SYMBOL_GPL(of_alias_get_highest_id);
+
 const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
 			       u32 *pu)
 {