Merge tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This patch set contains a lot (at least, for me) of improvements to
  the RISC-V kernel port:

   - The removal of some cacheinfo values that were bogus.

   - On systems with F but without D the kernel will not show the F
     extension to userspace, as it isn't actually supported.

   - Support for futexes.

   - Removal of some unused code.

   - Cleanup of some menuconfig entries.

   - Support for systems without a floating-point unit, and for building
     kernels that will never use the floating-point unit.

   - More fixes to the RV32I port, which regressed again. It's really
     time to get this into a regression test somewhere so I stop
     breaking it. Thanks to Zong for resurrecting it again!

   - Various fixes that resulted from a year old review of our original
     patch set that I finally got around to.

   - Various improvements to SMP support, largely based around having
     switched to logical hart numbering, as well as some interrupt
     improvements. This one is in the same patch set as above, thanks to
     Atish for sheparding everything though as my patch set was a bit of
     a mess.

  I'm pretty sure this is our largest patch set since the original
  kernel contribution, and it's certainly the one with the most
  contributors. While I don't have anything else I know I'm going to
  submit for the merge window, I would be somewhat surprised if I didn't
  screw anything up.

  Thanks for the help, everyone!"

* tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  RISC-V: Cosmetic menuconfig changes
  riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  RISC-V: remove the unused return_to_handler export
  RISC-V: Add futex support.
  RISC-V: Add FP register ptrace support for gdb.
  RISC-V: Mask out the F extension on systems without D
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Show IPI stats
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Use Linux logical CPU number instead of hartid
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Use mmgrab()
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  ...

2 files changed, 14 insertions, 8 deletions

diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index 4e8b347e43e2..084e97dc10ed 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -8,6 +8,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <asm/smp.h>
 #include <asm/sbi.h>
 
 /*
@@ -84,13 +85,16 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hart(n), error;
+	int cpuid, hartid, error;
 	struct clocksource *cs;
 
-	if (cpu_id != smp_processor_id())
+	hartid = riscv_of_processor_hartid(n);
+	cpuid = riscv_hartid_to_cpuid(hartid);
+
+	if (cpuid != smp_processor_id())
 		return 0;
 
-	cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
+	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
 	clocksource_register_hz(cs, riscv_timebase);
 
 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
@@ -98,7 +102,7 @@ static int __init riscv_timer_init_dt(struct device_node *n)
 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
 	if (error)
 		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
-		       error, cpu_id);
+		       error, cpuid);
 	return error;
 }
 
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 532e9d68c704..357e9daf94ae 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 /*
  * This driver implements a version of the RISC-V PLIC with the actual layout
@@ -176,7 +177,7 @@ static int plic_find_hart_id(struct device_node *node)
 {
 	for (; node; node = node->parent) {
 		if (of_device_is_compatible(node, "riscv"))
-			return riscv_of_processor_hart(node);
+			return riscv_of_processor_hartid(node);
 	}
 
 	return -1;
@@ -218,7 +219,7 @@ static int __init plic_init(struct device_node *node,
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
-		int cpu;
+		int cpu, hartid;
 
 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
@@ -229,12 +230,13 @@ static int __init plic_init(struct device_node *node,
 		if (parent.args[0] == -1)
 			continue;
 
-		cpu = plic_find_hart_id(parent.np);
-		if (cpu < 0) {
+		hartid = plic_find_hart_id(parent.np);
+		if (hartid < 0) {
 			pr_warn("failed to parse hart ID for context %d.\n", i);
 			continue;
 		}
 
+		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		handler->present = true;
 		handler->ctxid = i;