summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAddy Ke <addy.ke@rock-chips.com>2015-08-10 19:27:18 +0300
committerUlf Hansson <ulf.hansson@linaro.org>2015-08-17 13:45:28 +0300
commit57e104864bc4874a36796fd222d8d084dbf90b9b (patch)
tree9f7445eb170c5d5ba794b01d454ad08fa73d74e4 /drivers
parent40a7a463a80ae9e3b85a9fd85cf704fb9ac28b6f (diff)
downloadlinux-57e104864bc4874a36796fd222d8d084dbf90b9b.tar.xz
mmc: dw_mmc: add quirk for broken data transfer over scheme
This patch add a new quirk to add a s/w timer to notify the driver to terminate current transfer and report a data timeout to the core, if DTO interrupt does NOT come within the given time. dw_mmc call mmc_request_done func to finish transfer depends on DTO interrupt. If DTO interrupt does not come in sending data state, the current transfer will be blocked. We got the reply from synopsys: There are two counters but both use the same value of [31:8] bits. Data timeout counter doesn't wait for stop clock and you should get DRTO even when the clock is not stopped. Host Starvation timeout counter is triggered with stop clock condition. This means that host should get DRTO and DTO interrupt. But this case really exists, when driver reads tuning data from card on RK3288-pink2 board. I measured waveforms by oscilloscope and found that card clock was always on and data lines were always holded high level in sending data state. There are two possibility that data over interrupt doesn't come in reading data state on RK3X SoCs: - get command done interrupt, but doesn't get any data-related interrupt. - get data error interrupt, but doesn't get data over interrupt. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/host/dw_mmc-rockchip.c3
-rw-r--r--drivers/mmc/host/dw_mmc.c64
2 files changed, 65 insertions, 2 deletions
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index de15121bba7d..bc76aa22473e 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -73,6 +73,9 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
/* It is slot 8 on Rockchip SoCs */
host->sdio_id0 = 8;
+ /* It needs this quirk on all Rockchip SoCs */
+ host->pdata->quirks |= DW_MCI_QUIRK_BROKEN_DTO;
+
return 0;
}
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index f8ac14a14693..fcbf5524fd31 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1574,6 +1574,20 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
return data->error;
}
+static void dw_mci_set_drto(struct dw_mci *host)
+{
+ unsigned int drto_clks;
+ unsigned int drto_ms;
+
+ drto_clks = mci_readl(host, TMOUT) >> 8;
+ drto_ms = DIV_ROUND_UP(drto_clks, host->bus_hz / 1000);
+
+ /* add a bit spare time */
+ drto_ms += 10;
+
+ mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms));
+}
+
static void dw_mci_tasklet_func(unsigned long priv)
{
struct dw_mci *host = (struct dw_mci *)priv;
@@ -1651,8 +1665,16 @@ static void dw_mci_tasklet_func(unsigned long priv)
}
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
- &host->pending_events))
+ &host->pending_events)) {
+ /*
+ * If all data-related interrupts don't come
+ * within the given time in reading data state.
+ */
+ if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
+ (host->dir_status == DW_MCI_RECV_STATUS))
+ dw_mci_set_drto(host);
break;
+ }
set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
@@ -1685,8 +1707,17 @@ static void dw_mci_tasklet_func(unsigned long priv)
case STATE_DATA_BUSY:
if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
- &host->pending_events))
+ &host->pending_events)) {
+ /*
+ * If data error interrupt comes but data over
+ * interrupt doesn't come within the given time.
+ * in reading data state.
+ */
+ if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
+ (host->dir_status == DW_MCI_RECV_STATUS))
+ dw_mci_set_drto(host);
break;
+ }
host->data = NULL;
set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
@@ -2259,6 +2290,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
}
if (pending & SDMMC_INT_DATA_OVER) {
+ if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
+ del_timer(&host->dto_timer);
+
mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
if (!host->data_status)
host->data_status = pending;
@@ -2644,6 +2678,28 @@ static void dw_mci_cmd11_timer(unsigned long arg)
tasklet_schedule(&host->tasklet);
}
+static void dw_mci_dto_timer(unsigned long arg)
+{
+ struct dw_mci *host = (struct dw_mci *)arg;
+
+ switch (host->state) {
+ case STATE_SENDING_DATA:
+ case STATE_DATA_BUSY:
+ /*
+ * If DTO interrupt does NOT come in sending data state,
+ * we should notify the driver to terminate current transfer
+ * and report a data timeout to the core.
+ */
+ host->data_status = SDMMC_INT_DRTO;
+ set_bit(EVENT_DATA_ERROR, &host->pending_events);
+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
+ tasklet_schedule(&host->tasklet);
+ break;
+ default:
+ break;
+ }
+}
+
#ifdef CONFIG_OF
static struct dw_mci_of_quirks {
char *quirk;
@@ -2822,6 +2878,10 @@ int dw_mci_probe(struct dw_mci *host)
host->quirks = host->pdata->quirks;
+ if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
+ setup_timer(&host->dto_timer,
+ dw_mci_dto_timer, (unsigned long)host);
+
spin_lock_init(&host->lock);
spin_lock_init(&host->irq_lock);
INIT_LIST_HEAD(&host->queue);