Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc drivers updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystems for
  6.4-rc1.

  It's pretty big, but due to the removal of pcmcia drivers, almost
  breaks even for number of lines added vs. removed, a nice change.

  Included in here are:

   - removal of unused PCMCIA drivers (finally!)

   - Interconnect driver updates and additions

   - Lots of IIO driver updates and additions

   - MHI driver updates

   - Coresight driver updates

   - NVMEM driver updates, which required some OF updates

   - W1 driver updates and a new maintainer to manage the subsystem

   - FPGA driver updates

   - New driver subsystem, CDX, for AMD systems

   - lots of other small driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
  mcb-lpc: Reallocate memory region to avoid memory overlapping
  mcb-pci: Reallocate memory region to avoid memory overlapping
  mcb: Return actual parsed size when reading chameleon table
  kernel/configs: Drop Android config fragments
  virt: acrn: Replace obsolete memalign() with posix_memalign()
  spmi: Add a check for remove callback when removing a SPMI driver
  spmi: fix W=1 kernel-doc warnings
  spmi: mtk-pmif: Drop of_match_ptr for ID table
  spmi: pmic-arb: Convert to platform remove callback returning void
  spmi: mtk-pmif: Convert to platform remove callback returning void
  spmi: hisi-spmi-controller: Convert to platform remove callback returning void
  w1: gpio: remove unnecessary ENOMEM messages
  w1: omap-hdq: remove unnecessary ENOMEM messages
  w1: omap-hdq: add SPDX tag
  w1: omap-hdq: allow compile testing
  w1: matrox: remove unnecessary ENOMEM messages
  w1: matrox: use inline over __inline__
  w1: matrox: switch from asm to linux header
  w1: ds2482: do not use assignment in if condition
  w1: ds2482: drop unnecessary header
  ...

15 files changed, 85 insertions, 86 deletions

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 692cac3ff0ee..ad316573288a 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -53,7 +53,7 @@ config W1_MASTER_GPIO
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP || COMPILE_TEST
 	help
 	  Say Y here if you want support for the 1-wire or HDQ Interface
 	  on an OMAP processor.
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 3d8b51316bef..c1de8a92e144 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
-#include <asm/delay.h>
 
 #include <linux/w1.h>
 
@@ -36,7 +35,7 @@ MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \
 
 /* extra configurations - e.g. 1WS */
 static int extra_config;
-module_param(extra_config, int, S_IRUGO | S_IWUSR);
+module_param(extra_config, int, 0644);
 MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
 
 /*
@@ -78,10 +77,8 @@ MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8
  * To set the channel, write the value at the index of the channel.
  * Read and compare against the corresponding value to verify the change.
  */
-static const u8 ds2482_chan_wr[8] =
-	{ 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
-static const u8 ds2482_chan_rd[8] =
-	{ 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
+static const u8 ds2482_chan_wr[8] = { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
+static const u8 ds2482_chan_rd[8] = { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
 
 
 /*
@@ -454,7 +451,8 @@ static int ds2482_probe(struct i2c_client *client)
 				     I2C_FUNC_SMBUS_BYTE))
 		return -ENODEV;
 
-	if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto exit;
 	}
@@ -544,6 +542,7 @@ static void ds2482_remove(struct i2c_client *client)
  */
 static const struct i2c_device_id ds2482_id[] = {
 	{ "ds2482", 0 },
+	{ "ds2484", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ds2482_id);
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 0eb560fc0153..5f5b97e24700 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -304,6 +304,7 @@ static void ds_reset_device(struct ds_device *dev)
 	if (dev->spu_sleep) {
 		/* lower 4 bits are 0, see ds_set_pullup */
 		u8 del = dev->spu_sleep>>4;
+
 		if (ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del))
 			dev_err(&dev->udev->dev,
 				"%s: Error setting duration\n", __func__);
@@ -731,7 +732,8 @@ static void ds9490r_search(void *data, struct w1_master *master,
 			break;
 
 		if (st.data_in_buffer_status) {
-			/* Bulk in can receive partial ids, but when it does
+			/*
+			 * Bulk in can receive partial ids, but when it does
 			 * they fail crc and will be discarded anyway.
 			 * That has only been seen when status in buffer
 			 * is 0 and bulk is read anyway, so don't read
@@ -743,8 +745,10 @@ static void ds9490r_search(void *data, struct w1_master *master,
 				break;
 			for (i = 0; i < err/8; ++i) {
 				found_ids[found++] = buf[i];
-				/* can't know if there will be a discrepancy
-				 * value after until the next id */
+				/*
+				 * can't know if there will be a discrepancy
+				 * value after until the next id
+				 */
 				if (found == search_limit) {
 					master->search_id = buf[i];
 					break;
@@ -760,7 +764,8 @@ static void ds9490r_search(void *data, struct w1_master *master,
 	if (found <= search_limit) {
 		master->search_id = 0;
 	} else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) {
-		/* Only max_slave_count will be scanned in a search,
+		/*
+		 * Only max_slave_count will be scanned in a search,
 		 * but it will start where it left off next search
 		 * until all ids are identified and then it will start
 		 * over.  A continued search will report the previous
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index ee716c715710..2852cd2dc67c 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -7,7 +7,7 @@
 
 #include <asm/types.h>
 #include <linux/atomic.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <linux/delay.h>
 #include <linux/kernel.h>
@@ -39,8 +39,7 @@
 #define MATROX_GET_DATA			0x2B
 #define MATROX_CURSOR_CTL		0x06
 
-struct matrox_device
-{
+struct matrox_device {
 	void __iomem *base_addr;
 	void __iomem *port_index;
 	void __iomem *port_data;
@@ -64,7 +63,7 @@ struct matrox_device
  *
  * Port mapping.
  */
-static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
+static inline u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
 {
 	u8 ret;
 
@@ -75,7 +74,7 @@ static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
 	return ret;
 }
 
-static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
+static inline void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
 {
 	writeb(reg, dev->port_index);
 	writeb(val, dev->port_data);
@@ -123,13 +122,8 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent
 
 	dev = kzalloc(sizeof(struct matrox_device) +
 		       sizeof(struct w1_bus_master), GFP_KERNEL);
-	if (!dev) {
-		dev_err(&pdev->dev,
-			"%s: Failed to create new matrox_device object.\n",
-			__func__);
+	if (!dev)
 		return -ENOMEM;
-	}
-
 
 	dev->bus_master = (struct w1_bus_master *)(dev + 1);
 
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index bf2ec59c1f9d..6a39b71eb718 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * drivers/w1/masters/omap_hdq.c
- *
  * Copyright (C) 2007,2012 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -48,7 +42,7 @@
 static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
 
 static int w1_id;
-module_param(w1_id, int, S_IRUSR);
+module_param(w1_id, int, 0400);
 MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection in HDQ mode");
 
 struct hdq_data {
@@ -579,10 +573,8 @@ static int omap_hdq_probe(struct platform_device *pdev)
 	const char *mode;
 
 	hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL);
-	if (!hdq_data) {
-		dev_dbg(&pdev->dev, "unable to allocate memory\n");
+	if (!hdq_data)
 		return -ENOMEM;
-	}
 
 	hdq_data->dev = dev;
 	platform_set_drvdata(pdev, hdq_data);
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 530c77b8d062..e45acb6d916e 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -101,10 +101,8 @@ static int w1_gpio_probe(struct platform_device *pdev)
 
 	master = devm_kzalloc(dev, sizeof(struct w1_bus_master),
 			GFP_KERNEL);
-	if (!master) {
-		dev_err(dev, "Out of memory\n");
+	if (!master)
 		return -ENOMEM;
-	}
 
 	pdata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags);
 	if (IS_ERR(pdata->gpiod)) {
diff --git a/drivers/w1/slaves/w1_ds2406.c b/drivers/w1/slaves/w1_ds2406.c
index 6c269af73c80..2f5926859b8b 100644
--- a/drivers/w1/slaves/w1_ds2406.c
+++ b/drivers/w1/slaves/w1_ds2406.c
@@ -27,11 +27,11 @@ static ssize_t w1_f12_read_state(
 	struct bin_attribute *bin_attr,
 	char *buf, loff_t off, size_t count)
 {
-	u8 w1_buf[6]={W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0};
+	u8 w1_buf[6] = {W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0};
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
-	u16 crc=0;
+	u16 crc = 0;
 	int i;
-	ssize_t rtnval=1;
+	ssize_t rtnval = 1;
 
 	if (off != 0)
 		return 0;
@@ -47,12 +47,12 @@ static ssize_t w1_f12_read_state(
 
 	w1_write_block(sl->master, w1_buf, 3);
 	w1_read_block(sl->master, w1_buf+3, 3);
-	for (i=0; i<6; i++)
-		crc=crc16_byte(crc, w1_buf[i]);
-	if (crc==0xb001) /* good read? */
-		*buf=((w1_buf[3]>>5)&3)|0x30;
+	for (i = 0; i < 6; i++)
+		crc = crc16_byte(crc, w1_buf[i]);
+	if (crc == 0xb001) /* good read? */
+		*buf = ((w1_buf[3]>>5)&3)|0x30;
 	else
-		rtnval=-EIO;
+		rtnval = -EIO;
 
 	mutex_unlock(&sl->master->bus_mutex);
 
@@ -65,10 +65,10 @@ static ssize_t w1_f12_write_output(
 	char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
-	u8 w1_buf[6]={W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0};
-	u16 crc=0;
+	u8 w1_buf[6] = {W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0};
+	u16 crc = 0;
 	int i;
-	ssize_t rtnval=1;
+	ssize_t rtnval = 1;
 
 	if (count != 1 || off != 0)
 		return -EFAULT;
@@ -83,12 +83,12 @@ static ssize_t w1_f12_write_output(
 	w1_buf[3] = (((*buf)&3)<<5)|0x1F;
 	w1_write_block(sl->master, w1_buf, 4);
 	w1_read_block(sl->master, w1_buf+4, 2);
-	for (i=0; i<6; i++)
-		crc=crc16_byte(crc, w1_buf[i]);
-	if (crc==0xb001) /* good read? */
+	for (i = 0; i < 6; i++)
+		crc = crc16_byte(crc, w1_buf[i]);
+	if (crc == 0xb001) /* good read? */
 		w1_write_8(sl->master, 0xFF);
 	else
-		rtnval=-EIO;
+		rtnval = -EIO;
 
 	mutex_unlock(&sl->master->bus_mutex);
 	return rtnval;
@@ -99,7 +99,7 @@ static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 	{
 		.attr = {
 			.name = "state",
-			.mode = S_IRUGO,
+			.mode = 0444,
 		},
 		.size = 1,
 		.read = w1_f12_read_state,
@@ -107,7 +107,7 @@ static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 	{
 		.attr = {
 			.name = "output",
-			.mode = S_IRUGO | S_IWUSR | S_IWGRP,
+			.mode = 0664,
 		},
 		.size = 1,
 		.write = w1_f12_write_output,
@@ -133,6 +133,7 @@ static int w1_f12_add_slave(struct w1_slave *sl)
 static void w1_f12_remove_slave(struct w1_slave *sl)
 {
 	int i;
+
 	for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i)
 		sysfs_remove_bin_file(&sl->dev.kobj,
 			&(w1_f12_sysfs_bin_files[i]));
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index ad102c577122..56f822a1dfdb 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -35,12 +35,12 @@
 
 #define W1_F29_SUCCESS_CONFIRM_BYTE        0xAA
 
-static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
+static int _read_reg(struct w1_slave *sl, u8 address, unsigned char *buf)
 {
 	u8 wrbuf[3];
-	dev_dbg(&sl->dev,
-			"Reading with slave: %p, reg addr: %0#4x, buff addr: %p",
-			sl, (unsigned int)address, buf);
+
+	dev_dbg(&sl->dev, "Reading with slave: %p, reg addr: %0#4x, buff addr: %p",
+		sl, (unsigned int)address, buf);
 
 	if (!buf)
 		return -EINVAL;
@@ -206,7 +206,7 @@ out:
 }
 
 
-/**
+/*
  * Writing to the activity file resets the activity latches.
  */
 static ssize_t activity_write(struct file *filp, struct kobject *kobj,
@@ -292,7 +292,7 @@ static int w1_f29_disable_test_mode(struct w1_slave *sl)
 {
 	int res;
 	u8 magic[10] = {0x96, };
-	u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+	u64 rn = le64_to_cpu(*((u64 *)&sl->reg_num));
 
 	memcpy(&magic[1], &rn, 8);
 	magic[9] = 0x3C;
diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c
index c8cfac555b48..739009806467 100644
--- a/drivers/w1/slaves/w1_ds2413.c
+++ b/drivers/w1/slaves/w1_ds2413.c
@@ -99,8 +99,10 @@ static ssize_t output_write(struct file *filp, struct kobject *kobj,
 	if (w1_reset_select_slave(sl))
 		goto out;
 
-	/* according to the DS2413 datasheet the most significant 6 bits
-	   should be set to "1"s, so do it now */
+	/*
+	 * according to the DS2413 datasheet the most significant 6 bits
+	 * should be set to "1"s, so do it now
+	 */
 	*buf = *buf | 0xFC;
 
 	while (retries--) {
@@ -126,7 +128,7 @@ out:
 	return bytes_written;
 }
 
-static BIN_ATTR(output, S_IRUGO | S_IWUSR | S_IWGRP, NULL, output_write, 1);
+static BIN_ATTR(output, 0664, NULL, output_write, 1);
 
 static struct bin_attribute *w1_f3a_bin_attrs[] = {
 	&bin_attr_state,
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 0f72df15a024..9f21fd98f799 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -42,7 +42,7 @@ struct w1_f23_data {
 	u32	validcrc;
 };
 
-/**
+/*
  * Check the file size bounds and adjusts count as needed.
  * This would not be needed if the file size didn't reset to 0 after a write.
  */
@@ -98,7 +98,8 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
 	u8 wrbuf[3];
 #endif
 
-	if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
+	count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE);
+	if (!count)
 		return 0;
 
 	mutex_lock(&sl->master->bus_mutex);
@@ -115,7 +116,7 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
 	}
 	memcpy(buf, &data->memory[off], count);
 
-#else 	/* CONFIG_W1_SLAVE_DS2433_CRC */
+#else	/* CONFIG_W1_SLAVE_DS2433_CRC */
 
 	/* read directly from the EEPROM */
 	if (w1_reset_select_slave(sl)) {
@@ -138,16 +139,17 @@ out_up:
 }
 
 /**
- * Writes to the scratchpad and reads it back for verification.
+ * w1_f23_write() - Writes to the scratchpad and reads it back for verification.
+ * @sl:		The slave structure
+ * @addr:	Address for the write
+ * @len:	length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
+ * @data:	The data to write
+ *
  * Then copies the scratchpad to EEPROM.
  * The data must be on one page.
  * The master must be locked.
  *
- * @param sl	The slave structure
- * @param addr	Address for the write
- * @param len   length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
- * @param data	The data to write
- * @return	0=Success -1=failure
+ * Return:	0=Success, -1=failure
  */
 static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
 {
@@ -207,7 +209,8 @@ static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 	int addr, len, idx;
 
-	if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
+	count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE);
+	if (!count)
 		return 0;
 
 #ifdef CONFIG_W1_SLAVE_DS2433_CRC
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 9dcb5a54f7fc..3cde1bb1886b 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -91,6 +91,7 @@ static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
 			     loff_t off, size_t count)
 {
 	struct device *dev = kobj_to_dev(kobj);
+
 	return w1_ds2780_io(dev, buf, off, count, 0);
 }
 
diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c
index 2cb7c020b607..e418484b4a49 100644
--- a/drivers/w1/slaves/w1_ds2781.c
+++ b/drivers/w1/slaves/w1_ds2781.c
@@ -88,6 +88,7 @@ static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
 			     loff_t off, size_t count)
 {
 	struct device *dev = kobj_to_dev(kobj);
+
 	return w1_ds2781_io(dev, buf, off, count, 0);
 }
 
diff --git a/drivers/w1/slaves/w1_ds2805.c b/drivers/w1/slaves/w1_ds2805.c
index 6b5d12ba1b65..4c1a2c515317 100644
--- a/drivers/w1/slaves/w1_ds2805.c
+++ b/drivers/w1/slaves/w1_ds2805.c
@@ -264,7 +264,7 @@ out_up:
 static struct bin_attribute w1_f0d_bin_attr = {
 	.attr = {
 		.name = "eeprom",
-		.mode = S_IRUGO | S_IWUSR,
+		.mode = 0644,
 	},
 	.size = W1_F0D_EEPROM_SIZE,
 	.read = w1_f0d_read_bin,
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index 6cef6e2edb89..2854b8b9e93f 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -53,7 +53,7 @@ struct w1_f1C_data {
 	u32	validcrc;
 };
 
-/**
+/*
  * Check the file size bounds and adjusts count as needed.
  * This would not be needed if the file size didn't reset to 0 after a write.
  */
@@ -146,16 +146,17 @@ out_up:
 }
 
 /**
- * Writes to the scratchpad and reads it back for verification.
+ * w1_f1C_write() - Writes to the scratchpad and reads it back for verification.
+ * @sl:		The slave structure
+ * @addr:	Address for the write
+ * @len:	length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
+ * @data:	The data to write
+ *
  * Then copies the scratchpad to EEPROM.
  * The data must be on one page.
  * The master must be locked.
  *
- * @param sl	The slave structure
- * @param addr	Address for the write
- * @param len   length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
- * @param data	The data to write
- * @return	0=Success -1=failure
+ * Return:	0=Success, -1=failure
  */
 static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
 {
@@ -197,8 +198,10 @@ static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
 	wrbuf[3] = es;
 
 	for (i = 0; i < sizeof(wrbuf); ++i) {
-		/* issue 10ms strong pullup (or delay) on the last byte
-		   for writing the data from the scratchpad to EEPROM */
+		/*
+		 * issue 10ms strong pullup (or delay) on the last byte
+		 * for writing the data from the scratchpad to EEPROM
+		 */
 		if (w1_strong_pullup && i == sizeof(wrbuf)-1)
 			w1_next_pullup(sl->master, tm);
 
diff --git a/drivers/w1/slaves/w1_ds28e17.c b/drivers/w1/slaves/w1_ds28e17.c
index aed10b72fc99..52261b54d842 100644
--- a/drivers/w1/slaves/w1_ds28e17.c
+++ b/drivers/w1/slaves/w1_ds28e17.c
@@ -31,12 +31,12 @@ MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E17));
 
 /* Default I2C speed to be set when a DS28E17 is detected. */
 static int i2c_speed = 100;
-module_param_named(speed, i2c_speed, int, (S_IRUSR | S_IWUSR));
+module_param_named(speed, i2c_speed, int, 0600);
 MODULE_PARM_DESC(speed, "Default I2C speed to be set when a DS28E17 is detected");
 
 /* Default I2C stretch value to be set when a DS28E17 is detected. */
 static char i2c_stretch = 1;
-module_param_named(stretch, i2c_stretch, byte, (S_IRUSR | S_IWUSR));
+module_param_named(stretch, i2c_stretch, byte, 0600);
 MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is detected");
 
 /* DS28E17 device command codes. */
@@ -59,7 +59,7 @@ MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is
 /*
  * Maximum number of I2C bytes to transfer within one CRC16 protected onewire
  * command.
- * */
+ */
 #define W1_F19_WRITE_DATA_LIMIT 255
 
 /* Maximum number of I2C bytes to read with one onewire command. */