fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.

This branch just has the regmap change so it can be shared with the FSI
code.

23 files changed, 250 insertions, 168 deletions

diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
index 9643b905e2d8..6164fc4c96a4 100644
--- a/drivers/usb/cdns3/host.c
+++ b/drivers/usb/cdns3/host.c
@@ -24,11 +24,37 @@
 #define CFG_RXDET_P3_EN		BIT(15)
 #define LPM_2_STB_SWITCH_EN	BIT(25)
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd);
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
 
 static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
 	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
-	.suspend_quirk = xhci_cdns3_suspend_quirk,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
 };
 
 static int __cdns_host_init(struct cdns *cdns)
@@ -90,32 +116,6 @@ err1:
 	return ret;
 }
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	u32 value;
-
-	if (pm_runtime_status_suspended(hcd->self.controller))
-		return 0;
-
-	/* set usbcmd.EU3S */
-	value = readl(&xhci->op_regs->command);
-	value |= CMD_PM_INDEX;
-	writel(value, &xhci->op_regs->command);
-
-	if (hcd->regs) {
-		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
-		value |= CFG_RXDET_P3_EN;
-		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
-
-		value = readl(hcd->regs + XECP_PORT_CAP_REG);
-		value |= LPM_2_STB_SWITCH_EN;
-		writel(value, hcd->regs + XECP_PORT_CAP_REG);
-	}
-
-	return 0;
-}
-
 static void cdns_host_exit(struct cdns *cdns)
 {
 	kfree(cdns->xhci_plat_data);
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index ada78daba6df..c17516c29b63 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -256,8 +256,10 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 	ci->enabled_otg_timer_bits &= ~(1 << t);
 	if (ci->next_otg_timer == t) {
 		if (ci->enabled_otg_timer_bits == 0) {
+			spin_unlock_irqrestore(&ci->lock, flags);
 			/* No enabled timers after delete it */
 			hrtimer_cancel(&ci->otg_fsm_hrtimer);
+			spin_lock_irqsave(&ci->lock, flags);
 			ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
 		} else {
 			/* Find the next timer */
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 0722d2131305..079e183cf3bf 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -362,6 +362,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
 	{ USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* Realforce 87U Keyboard */
+	{ USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index ea51624461b5..1f348bc867c2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/reset.h>
@@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
 		 * mode. If the controller supports DRD but the dr_mode is not
 		 * specified or set to OTG, then set the mode to peripheral.
 		 */
-		if (mode == USB_DR_MODE_OTG &&
+		if (mode == USB_DR_MODE_OTG && !dwc->edev &&
 		    (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
 		     !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
 		    !DWC3_VER_IS_PRIOR(DWC3, 330A))
@@ -1690,6 +1691,56 @@ static void dwc3_check_params(struct dwc3 *dwc)
 	}
 }
 
+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	struct device_node *np_phy;
+	struct extcon_dev *edev = NULL;
+	const char *name;
+
+	if (device_property_read_bool(dev, "extcon"))
+		return extcon_get_edev_by_phandle(dev, 0);
+
+	/*
+	 * Device tree platforms should get extcon via phandle.
+	 * On ACPI platforms, we get the name from a device property.
+	 * This device property is for kernel internal use only and
+	 * is expected to be set by the glue code.
+	 */
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
+
+	/*
+	 * Check explicitly if "usb-role-switch" is used since
+	 * extcon_find_edev_by_node() can not be used to check the absence of
+	 * an extcon device. In the absence of an device it will always return
+	 * EPROBE_DEFER.
+	 */
+	if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+	    device_property_read_bool(dev, "usb-role-switch"))
+		return NULL;
+
+	/*
+	 * Try to get an extcon device from the USB PHY controller's "port"
+	 * node. Check if it has the "port" node first, to avoid printing the
+	 * error message from underlying code, as it's a valid case: extcon
+	 * device (and "port" node) may be missing in case of "usb-role-switch"
+	 * or OTG mode.
+	 */
+	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+	if (of_graph_is_present(np_phy)) {
+		struct device_node *np_conn;
+
+		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+		if (np_conn)
+			edev = extcon_find_edev_by_node(np_conn);
+		of_node_put(np_conn);
+	}
+	of_node_put(np_phy);
+
+	return edev;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
@@ -1840,6 +1891,12 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
+	dwc->edev = dwc3_get_extcon(dwc);
+	if (IS_ERR(dwc->edev)) {
+		ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n");
+		goto err3;
+	}
+
 	ret = dwc3_get_dr_mode(dwc);
 	if (ret)
 		goto err3;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 8cad9e7d3368..039bf241769a 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -8,7 +8,6 @@
  */
 
 #include <linux/extcon.h>
-#include <linux/of_graph.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
@@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
-{
-	struct device *dev = dwc->dev;
-	struct device_node *np_phy;
-	struct extcon_dev *edev = NULL;
-	const char *name;
-
-	if (device_property_read_bool(dev, "extcon"))
-		return extcon_get_edev_by_phandle(dev, 0);
-
-	/*
-	 * Device tree platforms should get extcon via phandle.
-	 * On ACPI platforms, we get the name from a device property.
-	 * This device property is for kernel internal use only and
-	 * is expected to be set by the glue code.
-	 */
-	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
-		edev = extcon_get_extcon_dev(name);
-		if (!edev)
-			return ERR_PTR(-EPROBE_DEFER);
-
-		return edev;
-	}
-
-	/*
-	 * Try to get an extcon device from the USB PHY controller's "port"
-	 * node. Check if it has the "port" node first, to avoid printing the
-	 * error message from underlying code, as it's a valid case: extcon
-	 * device (and "port" node) may be missing in case of "usb-role-switch"
-	 * or OTG mode.
-	 */
-	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
-	if (of_graph_is_present(np_phy)) {
-		struct device_node *np_conn;
-
-		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
-		if (np_conn)
-			edev = extcon_find_edev_by_node(np_conn);
-		of_node_put(np_conn);
-	}
-	of_node_put(np_phy);
-
-	return edev;
-}
-
 #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
 #define ROLE_SWITCH 1
 static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
@@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	    device_property_read_bool(dwc->dev, "usb-role-switch"))
 		return dwc3_setup_role_switch(dwc);
 
-	dwc->edev = dwc3_get_extcon(dwc);
-	if (IS_ERR(dwc->edev))
-		return PTR_ERR(dwc->edev);
-
 	if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index 6c14a79279f9..fea5290de83f 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -251,7 +251,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	/* Manage SoftReset */
 	reset_control_deassert(dwc3_data->rstc_rst);
 
-	child = of_get_child_by_name(node, "usb");
+	child = of_get_compatible_child(node, "snps,dwc3");
 	if (!child) {
 		dev_err(&pdev->dev, "failed to find dwc3 core node\n");
 		ret = -ENODEV;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 079cd333632e..026d4029bda6 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1029,7 +1029,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 		dep->endpoint.desc = NULL;
 	}
 
-	dwc3_remove_requests(dwc, dep, -ECONNRESET);
+	dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
 
 	dep->stream_capable = false;
 	dep->type = 0;
@@ -1292,8 +1292,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
 		}
 
-		/* always enable Interrupt on Missed ISOC */
-		trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+		if (!no_interrupt && !chain)
+			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:
@@ -1698,6 +1698,16 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
 	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	/*
+	 * If the End Transfer command was timed out while the device is
+	 * not in SETUP phase, it's possible that an incoming Setup packet
+	 * may prevent the command's completion. Let's retry when the
+	 * ep0state returns to EP0_SETUP_PHASE.
+	 */
+	if (ret == -ETIMEDOUT && dep->dwc->ep0state != EP0_SETUP_PHASE) {
+		dep->flags |= DWC3_EP_DELAY_STOP;
+		return 0;
+	}
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 
@@ -3238,6 +3248,10 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	if (event->status & DEPEVT_STATUS_SHORT && !chain)
 		return 1;
 
+	if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) &&
+	    DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC)
+		return 1;
+
 	if ((trb->ctrl & DWC3_TRB_CTRL_IOC) ||
 	    (trb->ctrl & DWC3_TRB_CTRL_LST))
 		return 1;
@@ -3719,7 +3733,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	 * timeout. Delay issuing the End Transfer command until the Setup TRB is
 	 * prepared.
 	 */
-	if (dwc->ep0state != EP0_SETUP_PHASE) {
+	if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) {
 		dep->flags |= DWC3_EP_DELAY_STOP;
 		return;
 	}
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index a7154fe8206d..f6f13e7f1ba1 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,13 +11,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
-#include "../host/xhci-plat.h"
 #include "core.h"
 
-static const struct xhci_plat_priv dwc3_xhci_plat_priv = {
-	.quirks = XHCI_SKIP_PHY_INIT,
-};
-
 static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
 					int irq, char *name)
 {
@@ -97,11 +92,6 @@ int dwc3_host_init(struct dwc3 *dwc)
 		goto err;
 	}
 
-	ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
-					sizeof(dwc3_xhci_plat_priv));
-	if (ret)
-		goto err;
-
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
 	if (dwc->usb3_lpm_capable)
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
index ec500ee499ee..0aa3d7e1f3cc 100644
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -304,6 +304,7 @@ int uvcg_queue_enable(struct uvc_video_queue *queue, int enable)
 
 		queue->sequence = 0;
 		queue->buf_used = 0;
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
 	} else {
 		ret = vb2_streamoff(&queue->queue, queue->queue.type);
 		if (ret < 0)
@@ -329,10 +330,11 @@ int uvcg_queue_enable(struct uvc_video_queue *queue, int enable)
 void uvcg_complete_buffer(struct uvc_video_queue *queue,
 					  struct uvc_buffer *buf)
 {
-	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
-	     buf->length != buf->bytesused) {
-		buf->state = UVC_BUF_STATE_QUEUED;
+	if (queue->flags & UVC_QUEUE_DROP_INCOMPLETE) {
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
+		buf->state = UVC_BUF_STATE_ERROR;
 		vb2_set_plane_payload(&buf->buf.vb2_buf, 0, 0);
+		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
 		return;
 	}
 
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index bb037fcc90e6..dd1c6b2ca7c6 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -88,6 +88,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 		struct uvc_buffer *buf)
 {
 	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
 	int len = video->req_size;
 	int ret;
 
@@ -113,13 +114,14 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		list_del(&buf->queue);
-		uvcg_complete_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
 
 		video->payload_size = 0;
 	}
 
 	if (video->payload_size == video->max_payload_size ||
+	    video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE ||
 	    buf->bytesused == video->queue.buf_used)
 		video->payload_size = 0;
 }
@@ -155,10 +157,10 @@ uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
 	sg = sg_next(sg);
 
 	for_each_sg(sg, iter, ureq->sgt.nents - 1, i) {
-		if (!len || !buf->sg || !sg_dma_len(buf->sg))
+		if (!len || !buf->sg || !buf->sg->length)
 			break;
 
-		sg_left = sg_dma_len(buf->sg) - buf->offset;
+		sg_left = buf->sg->length - buf->offset;
 		part = min_t(unsigned int, len, sg_left);
 
 		sg_set_page(iter, sg_page(buf->sg), part, buf->offset);
@@ -180,7 +182,8 @@ uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
 	req->length -= len;
 	video->queue.buf_used += req->length - header_len;
 
-	if (buf->bytesused == video->queue.buf_used || !buf->sg) {
+	if (buf->bytesused == video->queue.buf_used || !buf->sg ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		buf->offset = 0;
@@ -195,6 +198,7 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
 		struct uvc_buffer *buf)
 {
 	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
 	int len = video->req_size;
 	int ret;
 
@@ -209,12 +213,13 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
 
 	req->length = video->req_size - len;
 
-	if (buf->bytesused == video->queue.buf_used) {
+	if (buf->bytesused == video->queue.buf_used ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		list_del(&buf->queue);
-		uvcg_complete_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
 	}
 }
 
@@ -255,6 +260,11 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	case 0:
 		break;
 
+	case -EXDEV:
+		uvcg_dbg(&video->uvc->func, "VS request missed xfer.\n");
+		queue->flags |= UVC_QUEUE_DROP_INCOMPLETE;
+		break;
+
 	case -ESHUTDOWN:	/* disconnect from host. */
 		uvcg_dbg(&video->uvc->func, "VS request cancelled.\n");
 		uvcg_queue_cancel(queue, 1);
@@ -431,7 +441,8 @@ static void uvcg_video_pump(struct work_struct *work)
 
 		/* Endpoint now owns the request */
 		req = NULL;
-		video->req_int_count++;
+		if (buf->state != UVC_BUF_STATE_DONE)
+			video->req_int_count++;
 	}
 
 	if (!req)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
index b0dfca43fbdc..4f3bc27c1c62 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
@@ -591,6 +591,7 @@ int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx)
 		d->gadget.max_speed = USB_SPEED_HIGH;
 	d->gadget.speed = USB_SPEED_UNKNOWN;
 	d->gadget.dev.of_node = vhub->pdev->dev.of_node;
+	d->gadget.dev.of_node_reused = true;
 
 	rc = usb_add_gadget_udc(d->port_dev, &d->gadget);
 	if (rc != 0)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
index 5ac0ef88334e..53ffaf4e2e37 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_udc.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -151,6 +151,7 @@ static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit)
 	bdc->delayed_status = false;
 	bdc->reinit = reinit;
 	bdc->test_mode = false;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
 }
 
 /* TNotify wkaeup timer */
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 2df52f75f6b3..7558cc4d90cc 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -285,7 +285,7 @@ static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
 {
 	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
 
-	if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
+	if (!usb_dev->gpio_desc)
 		return;
 
 	gpiod_set_value(usb_dev->gpio_desc, val);
@@ -406,9 +406,11 @@ static int bcma_hcd_probe(struct bcma_device *core)
 		return -ENOMEM;
 	usb_dev->core = core;
 
-	if (core->dev.of_node)
-		usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc",
-						    GPIOD_OUT_HIGH);
+	usb_dev->gpio_desc = devm_gpiod_get_optional(&core->dev, "vcc",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(usb_dev->gpio_desc))
+		return dev_err_probe(&core->dev, PTR_ERR(usb_dev->gpio_desc),
+				     "error obtaining VCC GPIO");
 
 	switch (core->id.id) {
 	case BCMA_CORE_USB20_HOST:
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9e56aa28efcd..81ca2bc1f0be 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -889,15 +889,19 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 		if (dev->eps[i].stream_info)
 			xhci_free_stream_info(xhci,
 					dev->eps[i].stream_info);
-		/* Endpoints on the TT/root port lists should have been removed
-		 * when usb_disable_device() was called for the device.
-		 * We can't drop them anyway, because the udev might have gone
-		 * away by this point, and we can't tell what speed it was.
+		/*
+		 * Endpoints are normally deleted from the bandwidth list when
+		 * endpoints are dropped, before device is freed.
+		 * If host is dying or being removed then endpoints aren't
+		 * dropped cleanly, so delete the endpoint from list here.
+		 * Only applicable for hosts with software bandwidth checking.
 		 */
-		if (!list_empty(&dev->eps[i].bw_endpoint_list))
-			xhci_warn(xhci, "Slot %u endpoint %u "
-					"not removed from BW list!\n",
-					slot_id, i);
+
+		if (!list_empty(&dev->eps[i].bw_endpoint_list)) {
+			list_del_init(&dev->eps[i].bw_endpoint_list);
+			xhci_dbg(xhci, "Slot %u endpoint %u not removed from BW list!\n",
+				 slot_id, i);
+		}
 	}
 	/* If this is a hub, free the TT(s) from the TT list */
 	xhci_free_tt_info(xhci, dev, slot_id);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 40228a3d77a0..7bccbe50bab1 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -58,25 +58,13 @@
 #define PCI_DEVICE_ID_INTEL_CML_XHCI			0xa3af
 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI		0x9a13
 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
-#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI		0x461e
-#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI		0x464e
-#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI	0x51ed
-#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI		0xa71e
-#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI		0x7ec0
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI		0x51ed
 
 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI			0x1639
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1		0x161a
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2		0x161b
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3		0x161d
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4		0x161e
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5		0x15d6
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6		0x15d7
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7		0x161c
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8		0x161f
 
 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
@@ -258,6 +246,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_MISSING_CAS;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
+		xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 	    (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
@@ -268,12 +260,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI))
+	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
@@ -306,8 +293,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
-		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
+		/*
+		 * try to tame the ASMedia 1042 controller which reports 0.96
+		 * but appears to behave more like 1.0
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
@@ -336,15 +329,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 		xhci->quirks |= XHCI_NO_SOFT_RETRY;
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
-	    (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
+	/* xHC spec requires PCI devices to support D3hot and D3cold */
+	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5176765c4013..79d7931c048a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -810,9 +810,15 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	/* Workaround for spurious wakeups at shutdown with HSW */
-	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+
+	/*
+	 * Workaround for spurious wakeps at shutdown with HSW, and for boot
+	 * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+	 */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+	    xhci->quirks & XHCI_RESET_TO_DEFAULT)
 		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c0964fe8ac12..cc084d9505cd 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1897,6 +1897,7 @@ struct xhci_hcd {
 #define XHCI_BROKEN_D3COLD	BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
+#define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
index 3df64d2a9d43..a86032a26d36 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_struct.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -91,7 +91,7 @@ struct SiS_Ext {
 	unsigned char VB_ExtTVYFilterIndex;
 	unsigned char VB_ExtTVYFilterIndexROM661;
 	unsigned char REFindex;
-	char ROMMODEIDX661;
+	signed char ROMMODEIDX661;
 };
 
 struct SiS_Ext2 {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 697683e3fbff..c3b7f1d98e78 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -162,6 +162,8 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
 #define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
+#define UBLOX_VENDOR_ID				0x1546
+
 /* AMOI PRODUCTS */
 #define AMOI_VENDOR_ID				0x1614
 #define AMOI_PRODUCT_H01			0x0800
@@ -240,7 +242,6 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_UC15			0x9090
 /* These u-blox products use Qualcomm's vendor ID */
 #define UBLOX_PRODUCT_R410M			0x90b2
-#define UBLOX_PRODUCT_R6XX			0x90fa
 /* These Yuga products use Qualcomm's vendor ID */
 #define YUGA_PRODUCT_CLM920_NC5			0x9625
 
@@ -581,6 +582,9 @@ static void option_instat_callback(struct urb *urb);
 #define OPPO_VENDOR_ID				0x22d9
 #define OPPO_PRODUCT_R11			0x276c
 
+/* Sierra Wireless products */
+#define SIERRA_VENDOR_ID			0x1199
+#define SIERRA_PRODUCT_EM9191			0x90d3
 
 /* Device flags */
 
@@ -1124,8 +1128,16 @@ static const struct usb_device_id option_ids[] = {
 	/* u-blox products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
 	  .driver_info = RSVD(1) | RSVD(3) },
-	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x908b),	/* u-blox LARA-R6 00B */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa),
 	  .driver_info = RSVD(3) },
+	/* u-blox products */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) },	/* u-blox LARA-L6 */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1342),		/* u-blox LARA-L6 (RMNET) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1343),		/* u-blox LARA-L6 (ECM) */
+	  .driver_info = RSVD(4) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
@@ -2167,6 +2179,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) },			/* Fibocom MA510 (ECM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
@@ -2176,6 +2189,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index e1f4df7238bf..fdbf3694e21f 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -369,13 +369,24 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state)
 	return pmc_usb_command(port, (void *)&req, sizeof(req));
 }
 
-static int pmc_usb_mux_safe_state(struct pmc_usb_port *port)
+static int pmc_usb_mux_safe_state(struct pmc_usb_port *port,
+				  struct typec_mux_state *state)
 {
 	u8 msg;
 
 	if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE))
 		return 0;
 
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_DP_SID)
+		return 0;
+
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_TBT_SID)
+		return 0;
+
 	msg = PMC_USB_SAFE_MODE;
 	msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
 
@@ -443,7 +454,7 @@ pmc_usb_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
 		return 0;
 
 	if (state->mode == TYPEC_STATE_SAFE)
-		return pmc_usb_mux_safe_state(port);
+		return pmc_usb_mux_safe_state(port, state);
 	if (state->mode == TYPEC_STATE_USB)
 		return pmc_usb_connect(port, port->role);
 
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index b637e8b378b3..2a77bab948f5 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -474,7 +474,7 @@ static void tps6598x_handle_plug_event(struct tps6598x *tps, u32 status)
 static irqreturn_t cd321x_interrupt(int irq, void *data)
 {
 	struct tps6598x *tps = data;
-	u64 event;
+	u64 event = 0;
 	u32 status;
 	int ret;
 
@@ -519,8 +519,8 @@ err_unlock:
 static irqreturn_t tps6598x_interrupt(int irq, void *data)
 {
 	struct tps6598x *tps = data;
-	u64 event1;
-	u64 event2;
+	u64 event1 = 0;
+	u64 event2 = 0;
 	u32 status;
 	int ret;
 
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 74fb5a4c6f21..a7987fc764cc 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -183,16 +183,6 @@ out:
 }
 EXPORT_SYMBOL_GPL(ucsi_send_command);
 
-int ucsi_resume(struct ucsi *ucsi)
-{
-	u64 command;
-
-	/* Restore UCSI notification enable mask after system resume */
-	command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy;
-
-	return ucsi_send_command(ucsi, command, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(ucsi_resume);
 /* -------------------------------------------------------------------------- */
 
 struct ucsi_work {
@@ -744,6 +734,7 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 
 static int ucsi_check_connection(struct ucsi_connector *con)
 {
+	u8 prev_flags = con->status.flags;
 	u64 command;
 	int ret;
 
@@ -754,10 +745,13 @@ static int ucsi_check_connection(struct ucsi_connector *con)
 		return ret;
 	}
 
+	if (con->status.flags == prev_flags)
+		return 0;
+
 	if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
-		if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
-		    UCSI_CONSTAT_PWR_OPMODE_PD)
-			ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
+		ucsi_register_partner(con);
+		ucsi_pwr_opmode_change(con);
+		ucsi_partner_change(con);
 	} else {
 		ucsi_partner_change(con);
 		ucsi_port_psy_changed(con);
@@ -1276,6 +1270,28 @@ err:
 	return ret;
 }
 
+int ucsi_resume(struct ucsi *ucsi)
+{
+	struct ucsi_connector *con;
+	u64 command;
+	int ret;
+
+	/* Restore UCSI notification enable mask after system resume */
+	command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy;
+	ret = ucsi_send_command(ucsi, command, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	for (con = ucsi->connector; con->port; con++) {
+		mutex_lock(&con->lock);
+		ucsi_check_connection(con);
+		mutex_unlock(&con->lock);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ucsi_resume);
+
 static void ucsi_init_work(struct work_struct *work)
 {
 	struct ucsi *ucsi = container_of(work, struct ucsi, work.work);
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
index 8873c1644a29..ce0c8ef80c04 100644
--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -185,6 +185,15 @@ static int ucsi_acpi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int ucsi_acpi_resume(struct device *dev)
+{
+	struct ucsi_acpi *ua = dev_get_drvdata(dev);
+
+	return ucsi_resume(ua->ucsi);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ucsi_acpi_pm_ops, NULL, ucsi_acpi_resume);
+
 static const struct acpi_device_id ucsi_acpi_match[] = {
 	{ "PNP0CA0", 0 },
 	{ },
@@ -194,6 +203,7 @@ MODULE_DEVICE_TABLE(acpi, ucsi_acpi_match);
 static struct platform_driver ucsi_acpi_platform_driver = {
 	.driver = {
 		.name = "ucsi_acpi",
+		.pm = pm_ptr(&ucsi_acpi_pm_ops),
 		.acpi_match_table = ACPI_PTR(ucsi_acpi_match),
 	},
 	.probe = ucsi_acpi_probe,