diff options
author | Dmitry Osipenko <digetx@gmail.com> | 2020-01-06 04:34:02 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-01-09 13:15:31 +0300 |
commit | 545592e8eb6f20341c8260ddd32a7407f8bfa5f2 (patch) | |
tree | 1bf0c0e7a95026074d4ecdee99f14ff27b3ff98e /drivers/usb/phy | |
parent | 5dcdafdd30b1babde143ee7086d3de79396d023b (diff) | |
download | linux-545592e8eb6f20341c8260ddd32a7407f8bfa5f2.tar.xz |
usb: phy: tegra: Perform general clean up of the code
This patch fixes few dozens of legit checkpatch warnings, adds missed
handling of potential error-cases and prettifies code where makes sense.
All these clean-up changes are quite minor and do not fix any real
problems.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106013416.9604-7-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r-- | drivers/usb/phy/phy-tegra-usb.c | 485 |
1 files changed, 254 insertions, 231 deletions
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 664259d74658..c045f44ea964 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -28,35 +28,35 @@ #include <linux/usb/tegra_usb_phy.h> #include <linux/regulator/consumer.h> -#define ULPI_VIEWPORT 0x170 +#define ULPI_VIEWPORT 0x170 /* PORTSC PTS/PHCD bits, Tegra20 only */ -#define TEGRA_USB_PORTSC1 0x184 -#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) -#define TEGRA_USB_PORTSC1_PHCD (1 << 23) +#define TEGRA_USB_PORTSC1 0x184 +#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define TEGRA_USB_PORTSC1_PHCD BIT(23) /* HOSTPC1 PTS/PHCD bits, Tegra30 and above */ -#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 -#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) -#define TEGRA_USB_HOSTPC1_DEVLC_PHCD (1 << 22) +#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 +#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) +#define TEGRA_USB_HOSTPC1_DEVLC_PHCD BIT(22) /* Bits of PORTSC1, which will get cleared by writing 1 into them */ #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -#define USB_SUSP_CTRL 0x400 -#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) -#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) -#define USB_SUSP_CLR (1 << 5) -#define USB_PHY_CLK_VALID (1 << 7) -#define UTMIP_RESET (1 << 11) -#define UHSIC_RESET (1 << 11) -#define UTMIP_PHY_ENABLE (1 << 12) -#define ULPI_PHY_ENABLE (1 << 13) -#define USB_SUSP_SET (1 << 14) -#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) - -#define USB1_LEGACY_CTRL 0x410 -#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV BIT(3) +#define USB_WAKE_ON_DISCON_EN_DEV BIT(4) +#define USB_SUSP_CLR BIT(5) +#define USB_PHY_CLK_VALID BIT(7) +#define UTMIP_RESET BIT(11) +#define UHSIC_RESET BIT(11) +#define UTMIP_PHY_ENABLE BIT(12) +#define ULPI_PHY_ENABLE BIT(13) +#define USB_SUSP_SET BIT(14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE BIT(0) #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ @@ -64,94 +64,94 @@ #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) -#define ULPI_TIMING_CTRL_0 0x424 -#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) -#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP BIT(10) +#define ULPI_CLKOUT_PINMUX_BYP BIT(11) -#define ULPI_TIMING_CTRL_1 0x428 -#define ULPI_DATA_TRIMMER_LOAD (1 << 0) -#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) -#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) -#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) -#define ULPI_DIR_TRIMMER_LOAD (1 << 24) -#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD BIT(0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD BIT(16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD BIT(24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) -#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_PLL_CFG1 0x804 #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) -#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_CFG0 0x808 #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) #define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x70) >> 4) << 22) #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) -#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) -#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) -#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) -#define UTMIP_XCVR_LSBIAS_SEL (1 << 21) +#define UTMIP_FORCE_PD_POWERDOWN BIT(14) +#define UTMIP_FORCE_PD2_POWERDOWN BIT(16) +#define UTMIP_FORCE_PDZI_POWERDOWN BIT(18) +#define UTMIP_XCVR_LSBIAS_SEL BIT(21) #define UTMIP_XCVR_HSSLEW(x) (((x) & 0x3) << 4) #define UTMIP_XCVR_HSSLEW_MSB(x) ((((x) & 0x1fc) >> 2) << 25) -#define UTMIP_BIAS_CFG0 0x80c -#define UTMIP_OTGPD (1 << 11) -#define UTMIP_BIASPD (1 << 10) -#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) -#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) -#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD BIT(11) +#define UTMIP_BIASPD BIT(10) +#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) +#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) +#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) -#define UTMIP_HSRX_CFG0 0x810 -#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) -#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) -#define UTMIP_HSRX_CFG1 0x814 -#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) -#define UTMIP_TX_CFG0 0x820 -#define UTMIP_FS_PREABMLE_J (1 << 19) -#define UTMIP_HS_DISCON_DISABLE (1 << 8) +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J BIT(19) +#define UTMIP_HS_DISCON_DISABLE BIT(8) -#define UTMIP_MISC_CFG0 0x824 -#define UTMIP_DPDM_OBSERVE (1 << 26) -#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) -#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) -#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) -#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE BIT(26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE BIT(22) -#define UTMIP_MISC_CFG1 0x828 -#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) -#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) -#define UTMIP_DEBOUNCE_CFG0 0x82c -#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) -#define UTMIP_BAT_CHRG_CFG0 0x830 -#define UTMIP_PD_CHRG (1 << 0) +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG BIT(0) -#define UTMIP_SPARE_CFG0 0x834 -#define FUSE_SETUP_SEL (1 << 3) +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL BIT(3) -#define UTMIP_XCVR_CFG1 0x838 -#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) -#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) -#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) -#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN BIT(0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN BIT(2) +#define UTMIP_FORCE_PDDR_POWERDOWN BIT(4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) -#define UTMIP_BIAS_CFG1 0x83c -#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) /* For Tegra30 and above only, the address is different in Tegra20 */ -#define USB_USBMODE 0x1f8 -#define USB_USBMODE_MASK (3 << 0) -#define USB_USBMODE_HOST (3 << 0) -#define USB_USBMODE_DEVICE (2 << 0) +#define USB_USBMODE 0x1f8 +#define USB_USBMODE_MASK (3 << 0) +#define USB_USBMODE_HOST (3 << 0) +#define USB_USBMODE_DEVICE (2 << 0) static DEFINE_SPINLOCK(utmip_pad_lock); -static int utmip_pad_count; +static unsigned int utmip_pad_count; struct tegra_xtal_freq { - int freq; + unsigned int freq; u8 enable_delay; u8 stable_count; u8 active_delay; @@ -194,6 +194,11 @@ static const struct tegra_xtal_freq tegra_freq_table[] = { }, }; +static inline struct tegra_usb_phy *to_tegra_usb_phy(struct usb_phy *u_phy) +{ + return container_of(u_phy, struct tegra_usb_phy, u_phy); +} + static void set_pts(struct tegra_usb_phy *phy, u8 pts_val) { void __iomem *base = phy->regs; @@ -298,13 +303,16 @@ static int utmip_pad_close(struct tegra_usb_phy *phy) return ret; } -static void utmip_pad_power_on(struct tegra_usb_phy *phy) +static int utmip_pad_power_on(struct tegra_usb_phy *phy) { - unsigned long val, flags; - void __iomem *base = phy->pad_regs; struct tegra_utmip_config *config = phy->config; + void __iomem *base = phy->pad_regs; + unsigned long val, flags; + int err; - clk_prepare_enable(phy->pad_clk); + err = clk_prepare_enable(phy->pad_clk); + if (err) + return err; spin_lock_irqsave(&utmip_pad_lock, flags); @@ -327,19 +335,24 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy) spin_unlock_irqrestore(&utmip_pad_lock, flags); clk_disable_unprepare(phy->pad_clk); + + return 0; } static int utmip_pad_power_off(struct tegra_usb_phy *phy) { - unsigned long val, flags; void __iomem *base = phy->pad_regs; + unsigned long val, flags; + int err; if (!utmip_pad_count) { dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n"); return -EINVAL; } - clk_prepare_enable(phy->pad_clk); + err = clk_prepare_enable(phy->pad_clk); + if (err) + return err; spin_lock_irqsave(&utmip_pad_lock, flags); @@ -366,8 +379,8 @@ static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; /* * The USB driver may have already initiated the phy clock @@ -382,23 +395,24 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) val |= USB_SUSP_SET; writel(val, base + USB_SUSP_CTRL); - udelay(10); + usleep_range(10, 100); val = readl(base + USB_SUSP_CTRL); val &= ~USB_SUSP_SET; writel(val, base + USB_SUSP_CTRL); - } else + } else { set_phcd(phy, true); + } - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0)) dev_err(phy->u_phy.dev, "Timeout waiting for PHY to stabilize on disable\n"); } static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; /* * The USB driver may have already initiated the phy clock @@ -414,25 +428,27 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) val |= USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); - udelay(10); + usleep_range(10, 100); val = readl(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); - } else + } else { set_phcd(phy, false); + } if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, - USB_PHY_CLK_VALID)) + USB_PHY_CLK_VALID)) dev_err(phy->u_phy.dev, "Timeout waiting for PHY to stabilize on enable\n"); } static int utmi_phy_power_on(struct tegra_usb_phy *phy) { - unsigned long val; - void __iomem *base = phy->regs; struct tegra_utmip_config *config = phy->config; + void __iomem *base = phy->regs; + unsigned long val; + int err; val = readl(base + USB_SUSP_CTRL); val |= UTMIP_RESET; @@ -498,7 +514,9 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) writel(val, base + UTMIP_BAT_CHRG_CFG0); } - utmip_pad_power_on(phy); + err = utmip_pad_power_on(phy); + if (err) + return err; val = readl(base + UTMIP_XCVR_CFG0); val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | @@ -579,8 +597,8 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) static int utmi_phy_power_off(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; utmi_phy_clk_disable(phy); @@ -614,8 +632,8 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy) static void utmi_phy_preresume(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; val = readl(base + UTMIP_TX_CFG0); val |= UTMIP_HS_DISCON_DISABLE; @@ -624,8 +642,8 @@ static void utmi_phy_preresume(struct tegra_usb_phy *phy) static void utmi_phy_postresume(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; val = readl(base + UTMIP_TX_CFG0); val &= ~UTMIP_HS_DISCON_DISABLE; @@ -635,8 +653,8 @@ static void utmi_phy_postresume(struct tegra_usb_phy *phy) static void utmi_phy_restore_start(struct tegra_usb_phy *phy, enum tegra_usb_phy_port_speed port_speed) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; val = readl(base + UTMIP_MISC_CFG0); val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); @@ -645,47 +663,52 @@ static void utmi_phy_restore_start(struct tegra_usb_phy *phy, else val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; writel(val, base + UTMIP_MISC_CFG0); - udelay(1); + usleep_range(1, 10); val = readl(base + UTMIP_MISC_CFG0); val |= UTMIP_DPDM_OBSERVE; writel(val, base + UTMIP_MISC_CFG0); - udelay(10); + usleep_range(10, 100); } static void utmi_phy_restore_end(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; val = readl(base + UTMIP_MISC_CFG0); val &= ~UTMIP_DPDM_OBSERVE; writel(val, base + UTMIP_MISC_CFG0); - udelay(10); + usleep_range(10, 100); } static int ulpi_phy_power_on(struct tegra_usb_phy *phy) { - int ret; - unsigned long val; void __iomem *base = phy->regs; + unsigned long val; + int err; - ret = gpio_direction_output(phy->reset_gpio, 0); - if (ret < 0) { + err = gpio_direction_output(phy->reset_gpio, 0); + if (err) { dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n", - phy->reset_gpio, ret); - return ret; + phy->reset_gpio, err); + return err; } - msleep(5); - ret = gpio_direction_output(phy->reset_gpio, 1); - if (ret < 0) { + + err = clk_prepare_enable(phy->clk); + if (err) + return err; + + usleep_range(5000, 6000); + + err = gpio_direction_output(phy->reset_gpio, 1); + if (err) { dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n", - phy->reset_gpio, ret); - return ret; + phy->reset_gpio, err); + goto disable_clk; } - clk_prepare_enable(phy->clk); - msleep(1); + usleep_range(1000, 2000); val = readl(base + USB_SUSP_CTRL); val |= UHSIC_RESET; @@ -706,7 +729,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); val |= ULPI_DIR_TRIMMER_SEL(4); writel(val, base + ULPI_TIMING_CTRL_1); - udelay(10); + usleep_range(10, 100); val |= ULPI_DATA_TRIMMER_LOAD; val |= ULPI_STPDIRNXT_TRIMMER_LOAD; @@ -714,28 +737,33 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) writel(val, base + ULPI_TIMING_CTRL_1); /* Fix VbusInvalid due to floating VBUS */ - ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); - if (ret) { - dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); - return ret; + err = usb_phy_io_write(phy->ulpi, 0x40, 0x08); + if (err) { + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err); + goto disable_clk; } - ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); - if (ret) { - dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); - return ret; + err = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); + if (err) { + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err); + goto disable_clk; } val = readl(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); - udelay(100); + usleep_range(100, 1000); val = readl(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); return 0; + +disable_clk: + clk_disable_unprepare(phy->clk); + + return err; } static int ulpi_phy_power_off(struct tegra_usb_phy *phy) @@ -795,8 +823,7 @@ static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) static void tegra_usb_phy_shutdown(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(u_phy, struct tegra_usb_phy, - u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (WARN_ON(!phy->freq)) return; @@ -814,9 +841,9 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy) phy->freq = NULL; } -static int tegra_usb_phy_set_suspend(struct usb_phy *x, int suspend) +static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (WARN_ON(!phy->freq)) return -EINVAL; @@ -832,7 +859,7 @@ static int ulpi_open(struct tegra_usb_phy *phy) int err; err = gpio_direction_output(phy->reset_gpio, 0); - if (err < 0) { + if (err) { dev_err(phy->u_phy.dev, "ULPI reset GPIO %d direction not asserted: %d\n", phy->reset_gpio, err); @@ -844,10 +871,9 @@ static int ulpi_open(struct tegra_usb_phy *phy) static int tegra_usb_phy_init(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(u_phy, struct tegra_usb_phy, - u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); unsigned long parent_rate; - int i; + unsigned int i; int err; if (WARN_ON(phy->freq)) @@ -885,7 +911,7 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy) err = ulpi_open(phy); else err = utmip_pad_open(phy); - if (err < 0) + if (err) goto fail; err = tegra_usb_phy_power_on(phy); @@ -905,37 +931,37 @@ fail: return err; } -void tegra_usb_phy_preresume(struct usb_phy *x) +void tegra_usb_phy_preresume(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_preresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); -void tegra_usb_phy_postresume(struct usb_phy *x) +void tegra_usb_phy_postresume(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_postresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); -void tegra_ehci_phy_restore_start(struct usb_phy *x, - enum tegra_usb_phy_port_speed port_speed) +void tegra_ehci_phy_restore_start(struct usb_phy *u_phy, + enum tegra_usb_phy_port_speed port_speed) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_restore_start(phy, port_speed); } EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); -void tegra_ehci_phy_restore_end(struct usb_phy *x) +void tegra_ehci_phy_restore_end(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_restore_end(phy); @@ -946,21 +972,25 @@ static int read_utmi_param(struct platform_device *pdev, const char *param, u8 *dest) { u32 value; - int err = of_property_read_u32(pdev->dev.of_node, param, &value); - *dest = (u8)value; - if (err < 0) + int err; + + err = of_property_read_u32(pdev->dev.of_node, param, &value); + if (err) dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n", param, err); + else + *dest = value; + return err; } static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, struct platform_device *pdev) { + struct tegra_utmip_config *config; struct resource *res; int err; - struct tegra_utmip_config *config; tegra_phy->is_ulpi_phy = false; @@ -971,7 +1001,7 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, } tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + resource_size(res)); if (!tegra_phy->pad_regs) { dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n"); return -ENOMEM; @@ -985,49 +1015,49 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, config = tegra_phy->config; err = read_utmi_param(pdev, "nvidia,hssync-start-delay", - &config->hssync_start_delay); - if (err < 0) + &config->hssync_start_delay); + if (err) return err; err = read_utmi_param(pdev, "nvidia,elastic-limit", - &config->elastic_limit); - if (err < 0) + &config->elastic_limit); + if (err) return err; err = read_utmi_param(pdev, "nvidia,idle-wait-delay", - &config->idle_wait_delay); - if (err < 0) + &config->idle_wait_delay); + if (err) return err; err = read_utmi_param(pdev, "nvidia,term-range-adj", - &config->term_range_adj); - if (err < 0) + &config->term_range_adj); + if (err) return err; err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew", - &config->xcvr_lsfslew); - if (err < 0) + &config->xcvr_lsfslew); + if (err) return err; err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew", - &config->xcvr_lsrslew); - if (err < 0) + &config->xcvr_lsrslew); + if (err) return err; if (tegra_phy->soc_config->requires_extra_tuning_parameters) { err = read_utmi_param(pdev, "nvidia,xcvr-hsslew", - &config->xcvr_hsslew); - if (err < 0) + &config->xcvr_hsslew); + if (err) return err; err = read_utmi_param(pdev, "nvidia,hssquelch-level", - &config->hssquelch_level); - if (err < 0) + &config->hssquelch_level); + if (err) return err; err = read_utmi_param(pdev, "nvidia,hsdiscon-level", - &config->hsdiscon_level); - if (err < 0) + &config->hsdiscon_level); + if (err) return err; } @@ -1036,8 +1066,8 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, if (!config->xcvr_setup_use_fuses) { err = read_utmi_param(pdev, "nvidia,xcvr-setup", - &config->xcvr_setup); - if (err < 0) + &config->xcvr_setup); + if (err) return err; } @@ -1067,23 +1097,18 @@ MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table); static int tegra_usb_phy_probe(struct platform_device *pdev) { - const struct of_device_id *match; - struct resource *res; - struct tegra_usb_phy *tegra_phy = NULL; struct device_node *np = pdev->dev.of_node; + struct tegra_usb_phy *tegra_phy; enum usb_phy_interface phy_type; + struct reset_control *reset; + struct resource *res; int err; tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL); if (!tegra_phy) return -ENOMEM; - match = of_match_device(tegra_usb_phy_id_table, &pdev->dev); - if (!match) { - dev_err(&pdev->dev, "Error: No device match found\n"); - return -ENODEV; - } - tegra_phy->soc_config = match->data; + tegra_phy->soc_config = of_device_get_match_data(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1092,7 +1117,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) } tegra_phy->regs = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + resource_size(res)); if (!tegra_phy->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); return -ENOMEM; @@ -1101,33 +1126,6 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->is_legacy_phy = of_property_read_bool(np, "nvidia,has-legacy-mode"); - phy_type = of_usb_get_phy_mode(np); - switch (phy_type) { - case USBPHY_INTERFACE_MODE_UTMI: - err = utmi_phy_probe(tegra_phy, pdev); - if (err < 0) - return err; - break; - - case USBPHY_INTERFACE_MODE_ULPI: - tegra_phy->is_ulpi_phy = true; - - tegra_phy->reset_gpio = - of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); - if (!gpio_is_valid(tegra_phy->reset_gpio)) { - dev_err(&pdev->dev, - "Invalid GPIO: %d\n", tegra_phy->reset_gpio); - return tegra_phy->reset_gpio; - } - tegra_phy->config = NULL; - break; - - default: - dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n", - phy_type); - return -EINVAL; - } - if (of_find_property(np, "dr_mode", NULL)) tegra_phy->mode = usb_get_dr_mode(&pdev->dev); else @@ -1155,7 +1153,44 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) return err; } - if (tegra_phy->is_ulpi_phy) { + phy_type = of_usb_get_phy_mode(np); + switch (phy_type) { + case USBPHY_INTERFACE_MODE_UTMI: + err = utmi_phy_probe(tegra_phy, pdev); + if (err) + return err; + + tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads"); + err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk); + if (err) { + dev_err(&pdev->dev, + "Failed to get UTMIP pad clock: %d\n", err); + return err; + } + + reset = devm_reset_control_get_optional_shared(&pdev->dev, + "utmi-pads"); + err = PTR_ERR_OR_ZERO(reset); + if (err) { + dev_err(&pdev->dev, + "Failed to get UTMI-pads reset: %d\n", err); + return err; + } + tegra_phy->pad_rst = reset; + break; + + case USBPHY_INTERFACE_MODE_ULPI: + tegra_phy->is_ulpi_phy = true; + + tegra_phy->reset_gpio = + of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); + + if (!gpio_is_valid(tegra_phy->reset_gpio)) { + dev_err(&pdev->dev, + "Invalid GPIO: %d\n", tegra_phy->reset_gpio); + return tegra_phy->reset_gpio; + } + tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link"); err = PTR_ERR_OR_ZERO(tegra_phy->clk); if (err) { @@ -1165,8 +1200,8 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) } err = devm_gpio_request(&pdev->dev, tegra_phy->reset_gpio, - "ulpi_phy_reset_b"); - if (err < 0) { + "ulpi_phy_reset_b"); + if (err) { dev_err(&pdev->dev, "Request failed for GPIO %d: %d\n", tegra_phy->reset_gpio, err); return err; @@ -1175,28 +1210,16 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); if (!tegra_phy->ulpi) { dev_err(&pdev->dev, "Failed to create ULPI OTG\n"); - err = -ENOMEM; - return err; + return -ENOMEM; } tegra_phy->ulpi->io_priv = tegra_phy->regs + ULPI_VIEWPORT; - } else { - tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads"); - err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk); - if (err) { - dev_err(&pdev->dev, - "Failed to get UTMIP pad clock: %d\n", err); - return err; - } + break; - tegra_phy->pad_rst = devm_reset_control_get_optional_shared( - &pdev->dev, "utmi-pads"); - err = PTR_ERR_OR_ZERO(tegra_phy->pad_rst); - if (err) { - dev_err(&pdev->dev, - "Failed to get UTMI-pads reset: %d\n", err); - return err; - } + default: + dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n", + phy_type); + return -EINVAL; } tegra_phy->u_phy.dev = &pdev->dev; @@ -1207,7 +1230,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, tegra_phy); err = usb_add_phy_dev(&tegra_phy->u_phy); - if (err < 0) + if (err) goto free_ulpi; return 0; |