summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
authorPeter Chen <peter.chen@nxp.com>2020-12-30 08:11:14 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2021-01-04 18:53:47 +0300
commit7043e311a57625467b6fdb032dec8a6dea878208 (patch)
tree489b9cdaf0a7087ba559fdc7ed07cad1da234c22 /drivers/usb/gadget
parent64e6bbfff52db4bf6785fab9cffab850b2de6870 (diff)
downloadlinux-7043e311a57625467b6fdb032dec8a6dea878208.tar.xz
usb: gadget: core: change the comment for usb_gadget_connect
The pullup does not need to be enabled at below situations: - For platforms which the hardware pullup starts after setting register even they do not see the VBUS. If the pullup is always enabled for these platforms, it will consume more power and break the USB IF compliance tests [1]. - For platforms which need to do BC 1.2 charger detection after seeing the VBUS. Pullup D+ will break the charger detection flow. - For platforms which the system suspend is allowed when the connection with host is there but the bus is not at suspend. For these platforms, it is better to disable pullup when entering the system suspend otherwise the host may confuse the device behavior after controller is in low power mode. Disable pullup is considered as a disconnection event from host side. [1] USB-IF Full and Low Speed Compliance Test Procedure F Back-voltage Testing Section 7.2.1 of the USB specification requires that no device shall supply (source) current on VBUS at its upstream facing port at any time. From VBUS on its upstream facing port, a device may only draw (sink) current. They may not provide power to the pull-up resistor on D+/D- unless VBUS is present (see Section 7.1.5). Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201230051114.21370-1-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/udc/core.c3
1 files changed, 1 insertions, 2 deletions
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 5b5cfeb6c14a..6a62bbd01324 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -659,8 +659,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
*
* Enables the D+ (or potentially D-) pullup. The host will start
* enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered). This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
+ * is active (the link is powered).
*
* Returns zero on success, else negative errno.
*/