Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

17 files changed, 45 insertions, 45 deletions

diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd7269d79c..6e42aab75806 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
 	return 0;
 }
 
-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
 static int udc_set_txfifo_addr(struct udc_ep *ep)
 {
 	struct udc	*dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	if (use_dma) {
 		/* BNA event ? */
 		if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
-			DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+			DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
 					ep->num, readl(&ep->regs->desptr));
 			/* clear BNA */
 			writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	}
 	/* HE event ? */
 	if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
-		dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+		dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
 
 		/* clear HE */
 		writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 		/* BNA ? */
 		if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
 			dev_err(&dev->pdev->dev,
-				"BNA ep%din occured - DESPTR = %08lx \n",
+				"BNA ep%din occurred - DESPTR = %08lx \n",
 				ep->num,
 				(unsigned long) readl(&ep->regs->desptr));
 
@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 	/* HE event ? */
 	if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
 		dev_err(&dev->pdev->dev,
-			"HE ep%dn occured - DESPTR = %08lx \n",
+			"HE ep%dn occurred - DESPTR = %08lx \n",
 			ep->num, (unsigned long) readl(&ep->regs->desptr));
 
 		/* clear HE */
@@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 			req = list_entry(ep->queue.next,
 					struct udc_request, queue);
 			/*
-			 * length bytes transfered
+			 * length bytes transferred
 			 * check dma done of last desc. in PPBDU mode
 			 */
 			if (use_dma_ppb_du) {
@@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
 					/* write fifo */
 					udc_txfifo_write(ep, &req->req);
 
-					/* lengh bytes transfered */
+					/* lengh bytes transferred */
 					len = req->req.length - req->req.actual;
 					if (len > ep->ep.maxpacket)
 						len = ep->ep.maxpacket;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 4bbabbbfc93f..1d1c7543468e 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -584,7 +584,7 @@ union udc_setup_data {
  * SET and GET bitfields in u32 values
  * via constants for mask/offset:
  * <bit_field_stub_name> is the text between
- * UDC_ and _MASK|_OFS of appropiate
+ * UDC_ and _MASK|_OFS of appropriate
  * constant
  *
  * set bitfield value in u32 u32Val
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bb8ddf0469f9..9b7cdb16f26b 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -826,7 +826,7 @@ done:
 	return status;
 }
 
-/* reinit == restore inital software state */
+/* reinit == restore initial software state */
 static void udc_reinit(struct at91_udc *udc)
 {
 	u32 i;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c2251c40a205..82314ed22506 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -42,7 +42,7 @@
 static struct usb_composite_driver *composite;
 static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
 
-/* Some systems will need runtime overrides for the  product identifers
+/* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
@@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function)
  * usb_interface_id() is called from usb_function.bind() callbacks to
  * allocate new interface IDs.  The function driver will then store that
  * ID in interface, association, CDC union, and other descriptors.  It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
  * particularly changing its altsetting via set_alt().  There may
  * also be class-specific or vendor-specific requests to handle.
  *
  * All interface identifier should be allocated using this routine, to
  * ensure that for example different functions don't wrongly assign
  * different meanings to the same identifier.  Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
  * one configuration (or more than once in a given configuration) need
  * multiple versions of the relevant descriptors.
  *
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 00975ed903d1..9abecfddb27d 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -742,7 +742,7 @@ int __init control_selector_init(struct f_audio *audio)
 }
 
 /**
- * audio_bind_config - add USB audio fucntion to a configuration
+ * audio_bind_config - add USB audio function to a configuration
  * @c: the configuration to supcard the USB audio function
  * Context: single threaded during gadget setup
  *
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 130eee678c8b..86902a60bcdb 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
 #define NTB_OUT_SIZE		16384
 
 /*
- * skbs of size less than that will not be alligned
+ * skbs of size less than that will not be aligned
  * to NCM's dwNtbInMaxSize to save bus bandwidth
  */
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b827bebe..e35e24fd64bb 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
 /* Frame status field */
 /* Receive side */
 #define FRAME_OK               0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR            0x80000000 /* Error occured on frame */
+#define FRAME_ERROR            0x80000000 /* Error occurred on frame */
 #define START_FRAME_LOST       0x40000000 /* START_FRAME_LOST */
 #define END_FRAME_LOST         0x20000000 /* END_FRAME_LOST */
 #define RX_ER_NONOCT           0x10000000 /* Rx Non Octet Aligned Packet */
 #define RX_ER_BITSTUFF         0x08000000 /* Frame Aborted --Received packet
 					     with bit stuff error */
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN           0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
 /* Tranmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
 #define T_LSP         0x01000000         /* Low-speed transaction */
 #define T_PID         0x00c00000         /* packet id */
 #define T_NAK         0x00100000         /* No ack. */
-#define T_STAL        0x00080000         /* Stall recieved */
+#define T_STAL        0x00080000         /* Stall received */
 #define T_TO          0x00040000         /* time out */
 #define T_UN          0x00020000         /* underrun */
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 912cb8e63fe3..07499c1cdcc4 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 
 	max = le16_to_cpu(desc->wMaxPacketSize);
 
-	/* Disable automatic zlp generation.  Driver is reponsible to indicate
+	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
 	 * request. */
 	zlt = 1;
@@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 			| EP_QUEUE_HEAD_STATUS_HALT));
 	dQH->size_ioc_int_sts &= temp;
 
-	/* Ensure that updates to the QH will occure before priming. */
+	/* Ensure that updates to the QH will occur before priming. */
 	wmb();
 
 	/* Prime endpoint by writing 1 to ENDPTPRIME */
@@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 				status = -EILSEQ;
 				break;
 			} else
-				ERR("Unknown error has occured (0x%x)!\n",
+				ERR("Unknown error has occurred (0x%x)!\n",
 					errors);
 
 		} else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 20aeceed48c7..e88cce5c2c0d 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -15,7 +15,7 @@ struct usb_dr_device {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
@@ -52,7 +52,7 @@ struct usb_dr_host {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0ab7e141d494..47b86b99d449 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
 module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b47ce3c..9cee88a43a73 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
 	dqh->dtd_status &= dtd_status;
 	dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
 
-	/* ensure that updates to the dQH will occure before priming */
+	/* ensure that updates to the dQH will occur before priming */
 	wmb();
 
 	/* write 1 to endptprime register to PRIME endpoint */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7f38e0..b62b2640deb0 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 
 			/*
 			 * Ensure that updates to the QH will
-			 * occure before priming.
+			 * occur before priming.
 			 */
 			wmb();
 
@@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
 		dqh->size_ioc_int_sts = 0;
 
-		/* Ensure that updates to the QH will occure before priming. */
+		/* Ensure that updates to the QH will occur before priming. */
 		wmb();
 
 		/* Prime the Endpoint */
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 		return IRQ_NONE;
 	}
 
-	/* Clear all the interrupts occured */
+	/* Clear all the interrupts occurred */
 	writel(status, &udc->op_regs->usbsts);
 
 	if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d09155b25d73..24696f7fa6a9 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644);
 
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
- * USB suspend requests will be ignored.  This is acceptible for
+ * USB suspend requests will be ignored.  This is acceptable for
  * self-powered devices
  */
 static int enable_suspend = 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b5364f9d7cd2..55ca63ad3506 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 		goto err_usb;
 	}
 
-	/* finaly register the configuration */
+	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
 			nokia_bind_config);
 	if (status < 0)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 12ff6cffedc9..c3f2bd42bd5a 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget;
 #define PRINTER_VENDOR_NUM	0x0525		/* NetChip */
 #define PRINTER_PRODUCT_NUM	0xa4a8		/* Linux-USB Printer Gadget */
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2efd6732d130..78a39a41547d 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -602,7 +602,7 @@ static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
 /**
  * inc_ep_stats_bytes - Update ep stats counts
  * @ep: physical endpoint
- * @count: bytes transfered on endpoint
+ * @count: bytes transferred on endpoint
  * @is_in: ep direction (USB_DIR_IN or 0)
  */
 static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
@@ -877,7 +877,7 @@ static void nuke(struct pxa_ep *ep, int status)
  * If there is less space in request than bytes received in OUT endpoint,
  * bytes are left in the OUT endpoint.
  *
- * Returns how many bytes were actually transfered
+ * Returns how many bytes were actually transferred
  */
 static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -914,7 +914,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
  * endpoint. If there are no bytes to transfer, doesn't write anything
  * to physical endpoint.
  *
- * Returns how many bytes were actually transfered.
+ * Returns how many bytes were actually transferred.
  */
 static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
 			unsigned int max)
@@ -991,7 +991,7 @@ static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * caller guarantees at least one packet buffer is ready (or a zlp).
  * Doesn't complete the request, that's the caller's job
  *
- * Returns 1 if request fully transfered, 0 if partial transfer
+ * Returns 1 if request fully transferred, 0 if partial transfer
  */
 static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -1094,7 +1094,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * Sends a request (or a part of the request) to the control endpoint (ep0 in).
  * If the request doesn't fit, the remaining part will be sent from irq.
  * The request is considered fully written only if either :
- *   - last write transfered all remaining bytes, but fifo was not fully filled
+ *   - last write transferred all remaining bytes, but fifo was not fully filled
  *   - last write was a 0 length write
  *
  * Returns 1 if request fully written, 0 if request only partially sent
@@ -1548,7 +1548,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
  * pxa_udc_wakeup - Force udc device out of suspend
  * @_gadget: usb gadget
  *
- * Returns 0 if successfull, error code otherwise
+ * Returns 0 if successful, error code otherwise
  */
 static int pxa_udc_wakeup(struct usb_gadget *_gadget)
 {
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ef825c3baed9..0912679de99a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -41,8 +41,8 @@
 /* EP0_MPS_LIMIT
  *
  * Unfortunately there seems to be a limit of the amount of data that can
- * be transfered by IN transactions on EP0. This is either 127 bytes or 3
- * packets (which practially means 1 packet and 63 bytes of data) when the
+ * be transferred by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practically means 1 packet and 63 bytes of data) when the
  * MPS is set to 64.
  *
  * This means if we are wanting to move >127 bytes of data, we need to
@@ -783,7 +783,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		       hsotg->regs + S3C_DIEPINT(index));
 
 	/* Note, trying to clear the NAK here causes problems with transmit
-	 * on the S3C6400 ending up with the TXFIFO becomming full. */
+	 * on the S3C6400 ending up with the TXFIFO becoming full. */
 
 	/* check ep is enabled */
 	if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
@@ -1176,10 +1176,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 		writel(ctrl, hsotg->regs + reg);
 
 		dev_dbg(hsotg->dev,
-			"writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+			"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
 			ctrl, reg, readl(hsotg->regs + reg));
 
-		/* don't belive we need to anything more to get the EP
+		/* don't believe we need to anything more to get the EP
 		 * to reply with a STALL packet */
 	}
 }
@@ -1416,7 +1416,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
  * transaction.
  *
  * Note, since we don't write any data to the TxFIFO, then it is
- * currently belived that we do not need to wait for any space in
+ * currently believed that we do not need to wait for any space in
  * the TxFIFO.
  */
 static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
@@ -1540,7 +1540,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
  * that requires processing, so find out what is in there and do the
  * appropriate read.
  *
- * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
  * chunks, so if you have x packets received on an endpoint you'll get x
  * FIFO events delivered, each with a packet's worth of data in it.
  *
@@ -2188,7 +2188,7 @@ irq_retry:
 
 	/* these next two seem to crop-up occasionally causing the core
 	 * to shutdown the USB transfer, so try clearing them and logging
-	 * the occurence. */
+	 * the occurrence. */
 
 	if (gintsts & S3C_GINTSTS_GOUTNakEff) {
 		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
@@ -2469,7 +2469,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
 	.queue		= s3c_hsotg_ep_queue,
 	.dequeue	= s3c_hsotg_ep_dequeue,
 	.set_halt	= s3c_hsotg_ep_sethalt,
-	/* note, don't belive we have any call for the fifo routines */
+	/* note, don't believe we have any call for the fifo routines */
 };
 
 /**