Merge v6.12.43linux-rolling-lts

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 22 insertions, 22 deletions

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index d94d73e45fb6..440303566b14 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1353,28 +1353,28 @@ static void uart_sanitize_serial_rs485_delays(struct uart_port *port,
 	if (!port->rs485_supported.delay_rts_before_send) {
 		if (rs485->delay_rts_before_send) {
 			dev_warn_ratelimited(port->dev,
-				"%s (%d): RTS delay before sending not supported\n",
+				"%s (%u): RTS delay before sending not supported\n",
 				port->name, port->line);
 		}
 		rs485->delay_rts_before_send = 0;
 	} else if (rs485->delay_rts_before_send > RS485_MAX_RTS_DELAY) {
 		rs485->delay_rts_before_send = RS485_MAX_RTS_DELAY;
 		dev_warn_ratelimited(port->dev,
-			"%s (%d): RTS delay before sending clamped to %u ms\n",
+			"%s (%u): RTS delay before sending clamped to %u ms\n",
 			port->name, port->line, rs485->delay_rts_before_send);
 	}
 
 	if (!port->rs485_supported.delay_rts_after_send) {
 		if (rs485->delay_rts_after_send) {
 			dev_warn_ratelimited(port->dev,
-				"%s (%d): RTS delay after sending not supported\n",
+				"%s (%u): RTS delay after sending not supported\n",
 				port->name, port->line);
 		}
 		rs485->delay_rts_after_send = 0;
 	} else if (rs485->delay_rts_after_send > RS485_MAX_RTS_DELAY) {
 		rs485->delay_rts_after_send = RS485_MAX_RTS_DELAY;
 		dev_warn_ratelimited(port->dev,
-			"%s (%d): RTS delay after sending clamped to %u ms\n",
+			"%s (%u): RTS delay after sending clamped to %u ms\n",
 			port->name, port->line, rs485->delay_rts_after_send);
 	}
 }
@@ -1404,14 +1404,14 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4
 			rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
 
 			dev_warn_ratelimited(port->dev,
-				"%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
+				"%s (%u): invalid RTS setting, using RTS_ON_SEND instead\n",
 				port->name, port->line);
 		} else {
 			rs485->flags |= SER_RS485_RTS_AFTER_SEND;
 			rs485->flags &= ~SER_RS485_RTS_ON_SEND;
 
 			dev_warn_ratelimited(port->dev,
-				"%s (%d): invalid RTS setting, using RTS_AFTER_SEND instead\n",
+				"%s (%u): invalid RTS setting, using RTS_AFTER_SEND instead\n",
 				port->name, port->line);
 		}
 	}
@@ -1850,7 +1850,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 
 	expire = jiffies + timeout;
 
-	pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
+	pr_debug("uart_wait_until_sent(%u), jiffies=%lu, expire=%lu...\n",
 		port->line, jiffies, expire);
 
 	/*
@@ -2046,7 +2046,7 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
 		return;
 
 	mmio = uport->iotype >= UPIO_MEM;
-	seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
+	seq_printf(m, "%u: uart:%s %s%08llX irq:%u",
 			uport->line, uart_type(uport),
 			mmio ? "mmio:0x" : "port:",
 			mmio ? (unsigned long long)uport->mapbase
@@ -2068,18 +2068,18 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
 		if (pm_state != UART_PM_STATE_ON)
 			uart_change_pm(state, pm_state);
 
-		seq_printf(m, " tx:%d rx:%d",
+		seq_printf(m, " tx:%u rx:%u",
 				uport->icount.tx, uport->icount.rx);
 		if (uport->icount.frame)
-			seq_printf(m, " fe:%d",	uport->icount.frame);
+			seq_printf(m, " fe:%u",	uport->icount.frame);
 		if (uport->icount.parity)
-			seq_printf(m, " pe:%d",	uport->icount.parity);
+			seq_printf(m, " pe:%u",	uport->icount.parity);
 		if (uport->icount.brk)
-			seq_printf(m, " brk:%d", uport->icount.brk);
+			seq_printf(m, " brk:%u", uport->icount.brk);
 		if (uport->icount.overrun)
-			seq_printf(m, " oe:%d", uport->icount.overrun);
+			seq_printf(m, " oe:%u", uport->icount.overrun);
 		if (uport->icount.buf_overrun)
-			seq_printf(m, " bo:%d", uport->icount.buf_overrun);
+			seq_printf(m, " bo:%u", uport->icount.buf_overrun);
 
 #define INFOBIT(bit, str) \
 	if (uport->mctrl & (bit)) \
@@ -2571,7 +2571,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 		break;
 	}
 
-	pr_info("%s%s%s at %s (irq = %d, base_baud = %d) is a %s\n",
+	pr_info("%s%s%s at %s (irq = %u, base_baud = %u) is a %s\n",
 	       port->dev ? dev_name(port->dev) : "",
 	       port->dev ? ": " : "",
 	       port->name,
@@ -2579,7 +2579,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 
 	/* The magic multiplier feature is a bit obscure, so report it too.  */
 	if (port->flags & UPF_MAGIC_MULTIPLIER)
-		pr_info("%s%s%s extra baud rates supported: %d, %d",
+		pr_info("%s%s%s extra baud rates supported: %u, %u",
 			port->dev ? dev_name(port->dev) : "",
 			port->dev ? ": " : "",
 			port->name,
@@ -2978,7 +2978,7 @@ static ssize_t close_delay_show(struct device *dev,
 	struct tty_port *port = dev_get_drvdata(dev);
 
 	uart_get_info(port, &tmp);
-	return sprintf(buf, "%d\n", tmp.close_delay);
+	return sprintf(buf, "%u\n", tmp.close_delay);
 }
 
 static ssize_t closing_wait_show(struct device *dev,
@@ -2988,7 +2988,7 @@ static ssize_t closing_wait_show(struct device *dev,
 	struct tty_port *port = dev_get_drvdata(dev);
 
 	uart_get_info(port, &tmp);
-	return sprintf(buf, "%d\n", tmp.closing_wait);
+	return sprintf(buf, "%u\n", tmp.closing_wait);
 }
 
 static ssize_t custom_divisor_show(struct device *dev,
@@ -3008,7 +3008,7 @@ static ssize_t io_type_show(struct device *dev,
 	struct tty_port *port = dev_get_drvdata(dev);
 
 	uart_get_info(port, &tmp);
-	return sprintf(buf, "%d\n", tmp.io_type);
+	return sprintf(buf, "%u\n", tmp.io_type);
 }
 
 static ssize_t iomem_base_show(struct device *dev,
@@ -3028,7 +3028,7 @@ static ssize_t iomem_reg_shift_show(struct device *dev,
 	struct tty_port *port = dev_get_drvdata(dev);
 
 	uart_get_info(port, &tmp);
-	return sprintf(buf, "%d\n", tmp.iomem_reg_shift);
+	return sprintf(buf, "%u\n", tmp.iomem_reg_shift);
 }
 
 static ssize_t console_show(struct device *dev,
@@ -3168,7 +3168,7 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u
 	state->pm_state = UART_PM_STATE_UNDEFINED;
 	uart_port_set_cons(uport, drv->cons);
 	uport->minor = drv->tty_driver->minor_start + uport->line;
-	uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name,
+	uport->name = kasprintf(GFP_KERNEL, "%s%u", drv->dev_name,
 				drv->tty_driver->name_base + uport->line);
 	if (!uport->name) {
 		ret = -ENOMEM;
@@ -3211,7 +3211,7 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u
 		device_set_wakeup_capable(tty_dev, 1);
 	} else {
 		uport->flags |= UPF_DEAD;
-		dev_err(uport->dev, "Cannot register tty device on line %d\n",
+		dev_err(uport->dev, "Cannot register tty device on line %u\n",
 		       uport->line);
 	}