crisv10: use flags from tty_port

First, remove STD_FLAGS as the value, or its subvalues
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) is not tested anywhere --
there is no point to initialize flags to that. Second, use flags
member from tty_port when we have it now. So that we do not waste
space.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 29 insertions, 35 deletions

diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 50f56f39d436..2ae378cc65b6 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -169,7 +169,6 @@ static int get_lsr_info(struct e100_serial *info, unsigned int *value);
 
 
 #define DEF_BAUD 115200   /* 115.2 kbit/s */
-#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 #define DEF_RX 0x20  /* or SERIAL_CTRL_W >> 8 */
 /* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */
 #define DEF_TX 0x80  /* or SERIAL_CTRL_B */
@@ -246,7 +245,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH7_FIRST,
 	  .icmdadr     = R_DMA_CH7_CMD,
 	  .idescradr   = R_DMA_CH7_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 2,
@@ -300,7 +298,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH9_FIRST,
 	  .icmdadr     = R_DMA_CH9_CMD,
 	  .idescradr   = R_DMA_CH9_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 3,
@@ -356,7 +353,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH3_FIRST,
 	  .icmdadr     = R_DMA_CH3_CMD,
 	  .idescradr   = R_DMA_CH3_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 0,
@@ -410,7 +406,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH5_FIRST,
 	  .icmdadr     = R_DMA_CH5_CMD,
 	  .idescradr   = R_DMA_CH5_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 1,
@@ -2721,7 +2716,7 @@ startup(struct e100_serial * info)
 
 	/* if it was already initialized, skip this */
 
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (info->port.flags & ASYNC_INITIALIZED) {
 		local_irq_restore(flags);
 		free_page(xmit_page);
 		return 0;
@@ -2846,7 +2841,7 @@ startup(struct e100_serial * info)
 
 #endif /* CONFIG_SVINTO_SIM */
 
-	info->flags |= ASYNC_INITIALIZED;
+	info->port.flags |= ASYNC_INITIALIZED;
 
 	local_irq_restore(flags);
 	return 0;
@@ -2891,7 +2886,7 @@ shutdown(struct e100_serial * info)
 
 #endif /* CONFIG_SVINTO_SIM */
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
 #ifdef SERIAL_DEBUG_OPEN
@@ -2922,7 +2917,7 @@ shutdown(struct e100_serial * info)
 	if (info->port.tty)
 		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags &= ~ASYNC_INITIALIZED;
+	info->port.flags &= ~ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 }
 
@@ -2947,7 +2942,7 @@ change_speed(struct e100_serial *info)
 	/* possibly, the tx/rx should be disabled first to do this safely */
 
 	/* change baud-rate and write it to the hardware */
-	if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
 		/* Special baudrate */
 		u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
 		unsigned long alt_source =
@@ -3397,7 +3392,7 @@ get_serial_info(struct e100_serial * info,
 	tmp.line = info->line;
 	tmp.port = (int)info->ioport;
 	tmp.irq = info->irq;
-	tmp.flags = info->flags;
+	tmp.flags = info->port.flags;
 	tmp.baud_base = info->baud_base;
 	tmp.close_delay = info->close_delay;
 	tmp.closing_wait = info->closing_wait;
@@ -3424,9 +3419,9 @@ set_serial_info(struct e100_serial *info,
 		if ((new_serial.type != info->type) ||
 		    (new_serial.close_delay != info->close_delay) ||
 		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-		     (info->flags & ~ASYNC_USR_MASK)))
+		     (info->port.flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
-		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+		info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
 			       (new_serial.flags & ASYNC_USR_MASK));
 		goto check_and_exit;
 	}
@@ -3440,16 +3435,16 @@ set_serial_info(struct e100_serial *info,
 	 */
 
 	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~ASYNC_FLAGS) |
+	info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
 		       (new_serial.flags & ASYNC_FLAGS));
 	info->custom_divisor = new_serial.custom_divisor;
 	info->type = new_serial.type;
 	info->close_delay = new_serial.close_delay;
 	info->closing_wait = new_serial.closing_wait;
-	info->port.low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (info->port.flags & ASYNC_INITIALIZED) {
 		change_speed(info);
 	} else
 		retval = startup(info);
@@ -3789,12 +3784,12 @@ rs_close(struct tty_struct *tty, struct file * filp)
 		local_irq_restore(flags);
 		return;
 	}
-	info->flags |= ASYNC_CLOSING;
+	info->port.flags |= ASYNC_CLOSING;
 	/*
 	 * Save the termios structure, since this port may have
 	 * separate termios for callout and dialin.
 	 */
-	if (info->flags & ASYNC_NORMAL_ACTIVE)
+	if (info->port.flags & ASYNC_NORMAL_ACTIVE)
 		info->normal_termios = tty->termios;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify
@@ -3815,7 +3810,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	e100_disable_rx(info);
 	e100_disable_rx_irq(info);
 
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (info->port.flags & ASYNC_INITIALIZED) {
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
@@ -3836,7 +3831,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
 			schedule_timeout_interruptible(info->close_delay);
 		wake_up_interruptible(&info->open_wait);
 	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 	wake_up_interruptible(&info->close_wait);
 	local_irq_restore(flags);
 
@@ -3931,7 +3926,7 @@ rs_hangup(struct tty_struct *tty)
 	shutdown(info);
 	info->event = 0;
 	info->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->port.tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
@@ -3955,11 +3950,11 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 * until it's done, and then try again.
 	 */
 	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
+	    (info->port.flags & ASYNC_CLOSING)) {
 		wait_event_interruptible_tty(tty, info->close_wait,
-			!(info->flags & ASYNC_CLOSING));
+			!(info->port.flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
-		if (info->flags & ASYNC_HUP_NOTIFY)
+		if (info->port.flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
 		else
 			return -ERESTARTSYS;
@@ -3974,7 +3969,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
@@ -4010,9 +4005,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		local_irq_restore(flags);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
+		    !(info->port.flags & ASYNC_INITIALIZED)) {
 #ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
+			if (info->port.flags & ASYNC_HUP_NOTIFY)
 				retval = -EAGAIN;
 			else
 				retval = -ERESTARTSYS;
@@ -4021,7 +4016,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 			break;
 		}
-		if (!(info->flags & ASYNC_CLOSING) && do_clocal)
+		if (!(info->port.flags & ASYNC_CLOSING) && do_clocal)
 			/* && (do_clocal || DCD_IS_ASSERTED) */
 			break;
 		if (signal_pending(current)) {
@@ -4047,7 +4042,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 	if (retval)
 		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
+	info->port.flags |= ASYNC_NORMAL_ACTIVE;
 	return 0;
 }
 
@@ -4088,17 +4083,17 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	tty->driver_data = info;
 	info->port.tty = tty;
 
-	info->port.low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
+	info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY);
 
 	/*
 	 * If the port is in the middle of closing, bail out now
 	 */
 	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
+	    (info->port.flags & ASYNC_CLOSING)) {
 		wait_event_interruptible_tty(tty, info->close_wait,
-			!(info->flags & ASYNC_CLOSING));
+			!(info->port.flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
-		return ((info->flags & ASYNC_HUP_NOTIFY) ?
+		return ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 #else
 		return -EAGAIN;
@@ -4198,7 +4193,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 		return retval;
 	}
 
-	if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+	if ((info->count == 1) && (info->port.flags & ASYNC_SPLIT_TERMIOS)) {
 		tty->termios = info->normal_termios;
 		change_speed(info);
 	}
@@ -4447,7 +4442,6 @@ static int __init rs_init(void)
 		info->forced_eop = 0;
 		info->baud_base = DEF_BAUD_BASE;
 		info->custom_divisor = 0;
-		info->flags = 0;
 		info->close_delay = 5*HZ/10;
 		info->closing_wait = 30*HZ;
 		info->x_char = 0;