Merge tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver fixes from Greg KH:
 "Here are some small fixes for reported problems for tty and serial
  drivers for 5.13-rc4.

  They consist of:

   - 8250 bugfixes and new device support

   - lockdown security mode fixup

   - syzbot found problems fixed

   - 8250_omap fix for interrupt storm

   - revert of 8250_omap driver fix as it caused worse problem than the
     original issue

  All but the last patch have been in linux-next for a while, the last
  one is a revert of a problem found in linux-next with the 8250_omap
  driver change"

* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
  serial: 8250_pci: handle FL_NOIRQ board flag
  serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
  serial: 8250_pci: Add support for new HPE serial device
  serial: 8250: 8250_omap: Fix possible interrupt storm
  serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  serial: 8250_dw: Add device HID for new AMD UART controller
  serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
  serial: core: fix suspicious security_locked_down() call
  serial: tegra: Fix a mask operation that is always true

1 files changed, 17 insertions, 15 deletions

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 52bb21205bb6..6473361525d1 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -7,6 +7,7 @@
  *  Copyright (C) 2001 Russell King.
  */
 
+#include <linux/bits.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/dmaengine.h>
@@ -70,24 +71,25 @@ struct serial8250_config {
 	unsigned int	flags;
 };
 
-#define UART_CAP_FIFO	(1 << 8)	/* UART has FIFO */
-#define UART_CAP_EFR	(1 << 9)	/* UART has EFR */
-#define UART_CAP_SLEEP	(1 << 10)	/* UART has IER sleep */
-#define UART_CAP_AFE	(1 << 11)	/* MCR-based hw flow control */
-#define UART_CAP_UUE	(1 << 12)	/* UART needs IER bit 6 set (Xscale) */
-#define UART_CAP_RTOIE	(1 << 13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
-#define UART_CAP_HFIFO	(1 << 14)	/* UART has a "hidden" FIFO */
-#define UART_CAP_RPM	(1 << 15)	/* Runtime PM is active while idle */
-#define UART_CAP_IRDA	(1 << 16)	/* UART supports IrDA line discipline */
-#define UART_CAP_MINI	(1 << 17)	/* Mini UART on BCM283X family lacks:
+#define UART_CAP_FIFO	BIT(8)	/* UART has FIFO */
+#define UART_CAP_EFR	BIT(9)	/* UART has EFR */
+#define UART_CAP_SLEEP	BIT(10)	/* UART has IER sleep */
+#define UART_CAP_AFE	BIT(11)	/* MCR-based hw flow control */
+#define UART_CAP_UUE	BIT(12)	/* UART needs IER bit 6 set (Xscale) */
+#define UART_CAP_RTOIE	BIT(13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO	BIT(14)	/* UART has a "hidden" FIFO */
+#define UART_CAP_RPM	BIT(15)	/* Runtime PM is active while idle */
+#define UART_CAP_IRDA	BIT(16)	/* UART supports IrDA line discipline */
+#define UART_CAP_MINI	BIT(17)	/* Mini UART on BCM283X family lacks:
 					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
 					 */
 
-#define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
-#define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
-#define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
-#define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
-#define UART_BUG_PARITY	(1 << 4)	/* UART mishandles parity if FIFO enabled */
+#define UART_BUG_QUOT	BIT(0)	/* UART has buggy quot LSB */
+#define UART_BUG_TXEN	BIT(1)	/* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR	BIT(2)	/* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
+#define UART_BUG_PARITY	BIT(4)	/* UART mishandles parity if FIFO enabled */
+#define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
 
 
 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ