Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "Nothing particular important in the SoC driver updates, just the usual
  improvements to for drivers/soc and a couple of subsystems that don't
  fit anywhere else:

   - The largest set of updates is for Qualcomm SoC drivers, extending
     the set of supported features for additional SoCs in the QSEECOM,
     LLCC and socinfo drivers.a

   - The ti_sci firmware driver gains support for power managment

   - The drivers/reset subsystem sees a rework of the microchip sparx5
     and amlogic reset drivers to support additional chips, plus a few
     minor updates on other platforms

   - The SCMI firmware interface driver gains support for two protocol
     extensions, allowing more flexible use of the shared memory area
     and new DT binding properties for configurability.

   - Mediatek SoC drivers gain support for power managment on the MT8188
     SoC and a new driver for DVFS.

   - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
     and a few bugfixes

   - The Hisilicon Kunpeng HCCS driver gains support for configuring
     lanes through sysfs

  Finally, there are cleanups and minor fixes for drivers/{soc, bus,
  memory}, including changing back the .remove_new callback to .remove,
  as well as a few other updates for freescale (powerpc) soc drivers,
  NXP i.MX soc drivers, cznic turris platform driver, memory controller
  drviers, TI OMAP SoC drivers, and Tegra firmware drivers"

* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
  soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
  soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
  soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
  platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
  platform: cznic: turris-omnia-mcu: Document the driver private data structure
  firmware: turris-mox-rwtm: Document the driver private data structure
  bus: Switch back to struct platform_driver::remove()
  soc: qcom: ice: Remove the device_link field in qcom_ice
  drm/msm/adreno: Setup SMMU aparture for per-process page table
  firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
  firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
  soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  soc: qcom: llcc: Flip the manual slice configuration condition
  dt-bindings: firmware: qcom,scm: Document sm8750 SCM
  firmware: qcom: uefisecapp: Allow X1E Devkit devices
  misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
  misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
  soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  ...

3 files changed, 8 insertions, 8 deletions

diff --git a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
index d1b5b699cf23..1402b8c44c6b 100644
--- a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
@@ -74,7 +74,7 @@
 /**
  * Register bitfields for DRA752
  *
- * All the macros bellow define the required bits for
+ * All the macros below define the required bits for
  * controlling temperature on DRA752. Bit defines are
  * grouped by register.
  */
@@ -125,7 +125,7 @@
 /**
  * Temperature limits and thresholds for DRA752
  *
- * All the macros bellow are definitions for handling the
+ * All the macros below are definitions for handling the
  * ADC conversions and representation of temperature limits
  * and thresholds for DRA752. Definitions are grouped
  * by temperature domain.
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
index c63f439e01d6..3963f1badfc9 100644
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -32,7 +32,7 @@
 /**
  * Register and bit definitions for OMAP4430
  *
- * All the macros bellow define the required bits for
+ * All the macros below define the required bits for
  * controlling temperature on OMAP4430. Bit defines are
  * grouped by register.
  */
@@ -48,7 +48,7 @@
 /**
  * Temperature limits and thresholds for OMAP4430
  *
- * All the macros bellow are definitions for handling the
+ * All the macros below are definitions for handling the
  * ADC conversions and representation of temperature limits
  * and thresholds for OMAP4430.
  */
@@ -102,7 +102,7 @@
 /**
  * Register bitfields for OMAP4460
  *
- * All the macros bellow define the required bits for
+ * All the macros below define the required bits for
  * controlling temperature on OMAP4460. Bit defines are
  * grouped by register.
  */
@@ -135,7 +135,7 @@
 /**
  * Temperature limits and thresholds for OMAP4460
  *
- * All the macros bellow are definitions for handling the
+ * All the macros below are definitions for handling the
  * ADC conversions and representation of temperature limits
  * and thresholds for OMAP4460.
  */
diff --git a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
index 3880e667ea96..b70084b8013a 100644
--- a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
@@ -56,7 +56,7 @@
 /**
  * Register bitfields for OMAP5430
  *
- * All the macros bellow define the required bits for
+ * All the macros below define the required bits for
  * controlling temperature on OMAP5430. Bit defines are
  * grouped by register.
  */
@@ -101,7 +101,7 @@
 /**
  * Temperature limits and thresholds for OMAP5430
  *
- * All the macros bellow are definitions for handling the
+ * All the macros below are definitions for handling the
  * ADC conversions and representation of temperature limits
  * and thresholds for OMAP5430. Definitions are grouped
  * by temperature domain.