Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits)
  sh: allow building for both r2d boards in same binary.
  sh: fix r2d board detection
  sh: Discard .exit.text/.exit.data at runtime.
  sh: Fix up some section alignments in linker script.
  sh: Fix SH-4 DMAC CHCR masking.
  sh: Rip out left-over nommu cond syscall cruft.
  sh: Make kgdb i-cache flushing less inept.
  sh: kgdb section mismatches and tidying.
  sh: cleanup struct irqaction initializers.
  sh: early_printk tidying.
  video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver.
  sh: Conditionalize gUSA support.
  sh: Follow gUSA preempt changes in __switch_to().
  sh: Tidy up gUSA preempt handling.
  sh: __copy_user() optimizations for small copies.
  sh: clkfwk: Support multi-level clock propagation.
  sh: Fix URAM start address on SH7785.
  sh: Use boot_cpu_data for CPU probe.
  sh: Support extended mode TLB on SH-X3.
  sh: Bump MAX_ACTIVE_REGIONS for SH7785.
  ...

2 files changed, 61 insertions, 12 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 053fca41b08a..73440e26834b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -4,6 +4,7 @@
  * SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
  *
  *  Copyright (C) 2002 - 2006  Paul Mundt
+ *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
  *
  * based off of the old drivers/char/sh-sci.c by:
  *
@@ -301,6 +302,38 @@ static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
 	}
 	sci_out(port, SCFCR, fcr_val);
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+	unsigned short data;
+
+	if (cflag & CRTSCTS) {
+		/* enable RTS/CTS */
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 9-2; enable all scif pins but sck */
+			data = ctrl_inw(PORT_PTCR);
+			ctrl_outw((data & 0xfc03), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 9-2 */
+			data = ctrl_inw(PORT_PVCR);
+			ctrl_outw((data & 0xfc03), PORT_PVCR);
+		}
+		fcr_val |= SCFCR_MCE;
+	} else {
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 5-2; enable only tx and rx  */
+			data = ctrl_inw(PORT_PTCR);
+			ctrl_outw((data & 0xffc3), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 5-2 */
+			data = ctrl_inw(PORT_PVCR);
+			ctrl_outw((data & 0xffc3), PORT_PVCR);
+		}
+	}
+	sci_out(port, SCFCR, fcr_val);
+}
+
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
@@ -1276,7 +1309,7 @@ static int __init sci_console_init(void)
 console_initcall(sci_console_init);
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
-#ifdef CONFIG_SH_KGDB
+#ifdef CONFIG_SH_KGDB_CONSOLE
 /*
  * FIXME: Most of this can go away.. at the moment, we rely on
  * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
@@ -1334,9 +1367,7 @@ int __init kgdb_console_setup(struct console *co, char *options)
 
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
-#endif /* CONFIG_SH_KGDB */
 
-#ifdef CONFIG_SH_KGDB_CONSOLE
 static struct console kgdb_console = {
 	.name		= "ttySC",
 	.device		= uart_console_device,
@@ -1432,7 +1463,7 @@ static int __devinit sci_probe(struct platform_device *dev)
 
 #ifdef CONFIG_CPU_FREQ
 	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-	dev_info(&dev->dev, "sci: CPU frequency notifier registered\n");
+	dev_info(&dev->dev, "CPU frequency notifier registered\n");
 #endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index cf75466ebf57..e89ae29645d6 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -10,19 +10,19 @@
  *  Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
  *  Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
  *  Removed SH7300 support (Jul 2007).
+ *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
  */
 #include <linux/serial_core.h>
 #include <asm/io.h>
 
-#if defined(__H8300H__) || defined(__H8300S__)
 #include <asm/gpio.h>
+
 #if defined(CONFIG_H83007) || defined(CONFIG_H83068)
 #include <asm/regs306x.h>
 #endif
 #if defined(CONFIG_H8S2678)
 #include <asm/regs267x.h>
 #endif
-#endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
@@ -46,6 +46,10 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 # define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+# define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#define SCIF_ORER    0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -217,7 +221,8 @@
 #define SCIF_RDF   0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
 #define SCIF_DR    0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define SCIF_ORER    0x0200
 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 #define SCIF_RFDC_MASK 0x007f
@@ -254,7 +259,8 @@
 # define SCxSR_FER(port)		SCIF_FER
 # define SCxSR_PER(port)		SCIF_PER
 # define SCxSR_BRK(port)		SCIF_BRK
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 # define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
 # define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
 # define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
@@ -362,7 +368,8 @@
   CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
 #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -388,7 +395,8 @@
   CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -510,7 +518,15 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port)
 		return;
 	}
 }
-
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xa4430000)
+		return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
+	else if (port->mapbase == 0xa4438000)
+		return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
@@ -653,6 +669,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc60000)
 		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+	return 1;
 }
 #endif
 
@@ -691,7 +708,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 #if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)