BackMerge tag 'v5.15-rc7' into drm-next

The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 96 insertions, 15 deletions

diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index b3bcc5c882da..51424557810d 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -128,6 +128,81 @@ static int ufs_intel_link_startup_notify(struct ufs_hba *hba,
 	return err;
 }
 
+static int ufs_intel_set_lanes(struct ufs_hba *hba, u32 lanes)
+{
+	struct ufs_pa_layer_attr pwr_info = hba->pwr_info;
+	int ret;
+
+	pwr_info.lane_rx = lanes;
+	pwr_info.lane_tx = lanes;
+	ret = ufshcd_config_pwr_mode(hba, &pwr_info);
+	if (ret)
+		dev_err(hba->dev, "%s: Setting %u lanes, err = %d\n",
+			__func__, lanes, ret);
+	return ret;
+}
+
+static int ufs_intel_lkf_pwr_change_notify(struct ufs_hba *hba,
+				enum ufs_notify_change_status status,
+				struct ufs_pa_layer_attr *dev_max_params,
+				struct ufs_pa_layer_attr *dev_req_params)
+{
+	int err = 0;
+
+	switch (status) {
+	case PRE_CHANGE:
+		if (ufshcd_is_hs_mode(dev_max_params) &&
+		    (hba->pwr_info.lane_rx != 2 || hba->pwr_info.lane_tx != 2))
+			ufs_intel_set_lanes(hba, 2);
+		memcpy(dev_req_params, dev_max_params, sizeof(*dev_req_params));
+		break;
+	case POST_CHANGE:
+		if (ufshcd_is_hs_mode(dev_req_params)) {
+			u32 peer_granularity;
+
+			usleep_range(1000, 1250);
+			err = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY),
+						  &peer_granularity);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return err;
+}
+
+static int ufs_intel_lkf_apply_dev_quirks(struct ufs_hba *hba)
+{
+	u32 granularity, peer_granularity;
+	u32 pa_tactivate, peer_pa_tactivate;
+	int ret;
+
+	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY), &granularity);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), &peer_granularity);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &peer_pa_tactivate);
+	if (ret)
+		goto out;
+
+	if (granularity == peer_granularity) {
+		u32 new_peer_pa_tactivate = pa_tactivate + 2;
+
+		ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE), new_peer_pa_tactivate);
+	}
+out:
+	return ret;
+}
+
 #define INTEL_ACTIVELTR		0x804
 #define INTEL_IDLELTR		0x808
 
@@ -295,20 +370,6 @@ static void ufs_intel_common_exit(struct ufs_hba *hba)
 
 static int ufs_intel_resume(struct ufs_hba *hba, enum ufs_pm_op op)
 {
-	/*
-	 * To support S4 (suspend-to-disk) with spm_lvl other than 5, the base
-	 * address registers must be restored because the restore kernel can
-	 * have used different addresses.
-	 */
-	ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
-		      REG_UTP_TRANSFER_REQ_LIST_BASE_L);
-	ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
-		      REG_UTP_TRANSFER_REQ_LIST_BASE_H);
-	ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
-		      REG_UTP_TASK_REQ_LIST_BASE_L);
-	ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
-		      REG_UTP_TASK_REQ_LIST_BASE_H);
-
 	if (ufshcd_is_link_hibern8(hba)) {
 		int ret = ufshcd_uic_hibern8_exit(hba);
 
@@ -351,6 +412,7 @@ static int ufs_intel_lkf_init(struct ufs_hba *hba)
 	struct ufs_host *ufs_host;
 	int err;
 
+	hba->nop_out_timeout = 200;
 	hba->quirks |= UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8;
 	hba->caps |= UFSHCD_CAP_CRYPTO;
 	err = ufs_intel_common_init(hba);
@@ -381,10 +443,24 @@ static struct ufs_hba_variant_ops ufs_intel_lkf_hba_vops = {
 	.exit			= ufs_intel_common_exit,
 	.hce_enable_notify	= ufs_intel_hce_enable_notify,
 	.link_startup_notify	= ufs_intel_link_startup_notify,
+	.pwr_change_notify	= ufs_intel_lkf_pwr_change_notify,
+	.apply_dev_quirks	= ufs_intel_lkf_apply_dev_quirks,
 	.resume			= ufs_intel_resume,
 	.device_reset		= ufs_intel_device_reset,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int ufshcd_pci_restore(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	/* Force a full reset and restore */
+	ufshcd_set_link_off(hba);
+
+	return ufshcd_system_resume(dev);
+}
+#endif
+
 /**
  * ufshcd_pci_shutdown - main function to put the controller in reset state
  * @pdev: pointer to PCI device handle
@@ -468,9 +544,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 }
 
 static const struct dev_pm_ops ufshcd_pci_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
 	SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
 #ifdef CONFIG_PM_SLEEP
+	.suspend	= ufshcd_system_suspend,
+	.resume		= ufshcd_system_resume,
+	.freeze		= ufshcd_system_suspend,
+	.thaw		= ufshcd_system_resume,
+	.poweroff	= ufshcd_system_suspend,
+	.restore	= ufshcd_pci_restore,
 	.prepare	= ufshcd_suspend_prepare,
 	.complete	= ufshcd_resume_complete,
 #endif