Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...

1 files changed, 35 insertions, 22 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f31b6b780eaf..75f66f8ad3ea 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -99,28 +99,6 @@ config CHR_DEV_ST
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/scsi/scsi.txt>. The module will be called st.
 
-config CHR_DEV_OSST
-	tristate "SCSI OnStream SC-x0 tape support"
-	depends on SCSI
-	---help---
-	  The OnStream SC-x0 SCSI tape drives cannot be driven by the
-	  standard st driver, but instead need this special osst driver and
-	  use the  /dev/osstX char device nodes (major 206).  Via usb-storage,
-	  you may be able to drive the USB-x0 and DI-x0 drives as well.
-	  Note that there is also a second generation of OnStream
-	  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
-	  tapes (QIC-157) and can be driven by the standard driver st.
-	  For more information, you may have a look at the SCSI-HOWTO
-	  <http://www.tldp.org/docs.html#howto>  and
-	  <file:Documentation/scsi/osst.txt>  in the kernel source.
-	  More info on the OnStream driver may be found on
-	  <http://sourceforge.net/projects/osst/>
-	  Please also have a look at the standard st docu, as most of it
-	  applies to osst as well.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>. The module will be called osst.
-
 config BLK_DEV_SR
 	tristate "SCSI CDROM support"
 	depends on SCSI && BLK_DEV
@@ -664,6 +642,41 @@ config SCSI_DMX3191D
 	  To compile this driver as a module, choose M here: the
 	  module will be called dmx3191d.
 
+config SCSI_FDOMAIN
+	tristate
+	depends on SCSI
+
+config SCSI_FDOMAIN_PCI
+	tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
+	depends on PCI && SCSI
+	select SCSI_FDOMAIN
+	help
+	  This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
+	  and other adapters with PCI bus based on the Future Domain chipsets
+	  (Adaptec AHA-2920A).
+
+	  NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
+	  and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
+	  controller support"). This Future Domain driver works with the older
+	  Adaptec AHA-2920A boards with a Future Domain chip on them.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fdomain_pci.
+
+config SCSI_FDOMAIN_ISA
+	tristate "Future Domain 16xx ISA SCSI support"
+	depends on ISA && SCSI
+	select CHECK_SIGNATURE
+	select SCSI_FDOMAIN
+	help
+	  This is support for Future Domain's 16-bit SCSI host adapters
+	  (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters
+	  with ISA bus based on the Future Domain chipsets (Quantum ISA-200S,
+	  ISA-250MG; and at least one IBM board).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fdomain_isa.
+
 config SCSI_GDTH
 	tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
 	depends on PCI && SCSI