Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "This pull request is full of clk driver changes. In fact, there aren't
  any changes to the clk framework this time around. That's probably
  because everyone was on vacation (yours truly included). We did lose a
  couple clk drivers this time around because nobody was using those
  devices. That skews the diffstat a bit, but either way, nothing looks
  out of the ordinary here. The usual suspects are chugging along adding
  support for more SoCs and fixing bugs.

  If I had to choose, I'd say the theme for the past few months has been
  "polish". There's quite a few patches that migrate to
  devm_platform_ioremap_resource() in here. And there's more than a
  handful of patches that move the NR_CLKS define from the DT binding
  header to the driver. There's even patches that migrate drivers to use
  clk_parent_data and clk_hw to describe clk tree topology. It seems
  that the spring (summer?) cleaning bug got some folks, or the
  semiconductor shortage finally hit the software side.

  New Drivers:
   - StarFive JH7110 SoC clock drivers
   - Qualcomm IPQ5018 Global Clock Controller driver
   - Versa3 clk generator to support 48KHz playback/record with audio
     codec on RZ/G2L SMARC EVK

  Removed Drivers:
   - Remove non-OF mmp clk drivers
   - Remove OXNAS clk driver

  Updates:
   - Add __counted_by to struct clk_hw_onecell_data and struct
     spmi_pmic_div_clk_cc
   - Move defines for numbers of clks (NR_CLKS) from DT headers to
     drivers
   - Introduce kstrdup_and_replace() and use it
   - Add PLL rates for Rockchip rk3568
   - Add the display clock tree for Rockchip rv1126
   - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Convert sun9i-mmc clock to use
     devm_platform_get_and_ioremap_resource()
   - Fix function name in a comment in ccu_mmc_timing.c
   - Parameter name correction for ccu_nkm_round_rate()
   - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
     consider alternative parent rates when determining clock rates
   - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
   - Support finding closest (as opposed to closest but not higher)
     clock rate for NM, NKM, mux and div type clocks, as use it for
     Allwinner A64 pll-video0
   - Prefer current parent rate if able to generate ideal clock rate for
     Allwinner NKM clocks
   - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
     moved out to the interconnect drivers
   - Fix various PM runtime bugs across many Qualcomm clk drivers
   - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
   - Add network related resets on Qualcomm IPQ4019
   - Add a couple missing USB related clocks to Qualcomm IPQ9574
   - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
     controller
   - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
     and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
     corrected
   - Add missing GDSCs to and correct GDSCs for the SC8280XP global
     clock controller driver
   - Support retention for the Qualcomm SC8280XP display clock
     controller GDSCs.
   - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
     to fix issues with missing parent clocks across sc7180, sm7150,
     sm6350 and sm8250, while sm8450 is corrected to use floor ops
   - Correct Qualcomm SM6350 GPU clock controller's clock supplies
   - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
   - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
   - Change the delay in the Qualcomm reset controller to fsleep() for
     correctness
   - Extend the Qualcomm SM83550 Video clock controller to support
     SC8280XP
   - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
     R-Car H3, M3-W, and M3-N SoCs
   - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
   - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
   - Add the PDM IPC clock for i.MX93
   - Add 519.75MHz frequency support for i.MX9 PLL
   - Simplify the .determine_rate() implementation for i.MX GPR mux
   - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
   - Add the audio mux clock to i.MX8
   - Fix the SPLL2 MULT range for PLLv4
   - Update the SPLL2 type in i.MX8ULP
   - Fix the SAI4 clock on i.MX8MP
   - Add silicon revision print for i.MX25 on clocks init
   - Drop the return value from __mx25_clocks_init()
   - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
   - Drop restrictions for i.MX PLL14xx and fix its max prediv value
   - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
     allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  ...

1 files changed, 30 insertions, 0 deletions

diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c
index 2d26ae95c8cc..29a43f0f2ad6 100644
--- a/drivers/reset/starfive/reset-starfive-jh7110.c
+++ b/drivers/reset/starfive/reset-starfive-jh7110.c
@@ -31,6 +31,24 @@ static const struct jh7110_reset_info jh7110_aon_info = {
 	.status_offset = 0x3C,
 };
 
+static const struct jh7110_reset_info jh7110_stg_info = {
+	.nr_resets = JH7110_STGRST_END,
+	.assert_offset = 0x74,
+	.status_offset = 0x78,
+};
+
+static const struct jh7110_reset_info jh7110_isp_info = {
+	.nr_resets = JH7110_ISPRST_END,
+	.assert_offset = 0x38,
+	.status_offset = 0x3C,
+};
+
+static const struct jh7110_reset_info jh7110_vout_info = {
+	.nr_resets = JH7110_VOUTRST_END,
+	.assert_offset = 0x48,
+	.status_offset = 0x4C,
+};
+
 static int jh7110_reset_probe(struct auxiliary_device *adev,
 			      const struct auxiliary_device_id *id)
 {
@@ -58,6 +76,18 @@ static const struct auxiliary_device_id jh7110_reset_ids[] = {
 		.name = "clk_starfive_jh7110_sys.rst-aon",
 		.driver_data = (kernel_ulong_t)&jh7110_aon_info,
 	},
+	{
+		.name = "clk_starfive_jh7110_sys.rst-stg",
+		.driver_data = (kernel_ulong_t)&jh7110_stg_info,
+	},
+	{
+		.name = "clk_starfive_jh7110_sys.rst-isp",
+		.driver_data = (kernel_ulong_t)&jh7110_isp_info,
+	},
+	{
+		.name = "clk_starfive_jh7110_sys.rst-vo",
+		.driver_data = (kernel_ulong_t)&jh7110_vout_info,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(auxiliary, jh7110_reset_ids);