Merge branch 'x86/paravirt' into x86/entry

Merge in the recent paravirt changes to resolve conflicts caused
by objtool annotations.

Conflicts:
	arch/x86/xen/xen-asm.S

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 60 insertions, 36 deletions

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index e051aecf95c4..d70caecd21d2 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -51,6 +51,7 @@
  * @dual_edge_irqs: Bitmap of irqs that need sw emulated dual edge
  *                  detection.
  * @skip_wake_irqs: Skip IRQs that are handled by wakeup interrupt controller
+ * @disabled_for_mux: These IRQs were disabled because we muxed away.
  * @soc:            Reference to soc_data of platform specific data.
  * @regs:           Base addresses for the TLMM tiles.
  * @phys_base:      Physical base address
@@ -72,6 +73,7 @@ struct msm_pinctrl {
 	DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
 	DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
 	DECLARE_BITMAP(skip_wake_irqs, MAX_NR_GPIO);
+	DECLARE_BITMAP(disabled_for_mux, MAX_NR_GPIO);
 
 	const struct msm_pinctrl_soc_data *soc;
 	void __iomem *regs[MAX_NR_TILES];
@@ -96,6 +98,14 @@ MSM_ACCESSOR(intr_cfg)
 MSM_ACCESSOR(intr_status)
 MSM_ACCESSOR(intr_target)
 
+static void msm_ack_intr_status(struct msm_pinctrl *pctrl,
+				const struct msm_pingroup *g)
+{
+	u32 val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
+
+	msm_writel_intr_status(val, pctrl, g);
+}
+
 static int msm_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -171,6 +181,10 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
 			      unsigned group)
 {
 	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	struct gpio_chip *gc = &pctrl->chip;
+	unsigned int irq = irq_find_mapping(gc->irq.domain, group);
+	struct irq_data *d = irq_get_irq_data(irq);
+	unsigned int gpio_func = pctrl->soc->gpio_func;
 	const struct msm_pingroup *g;
 	unsigned long flags;
 	u32 val, mask;
@@ -187,6 +201,20 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
 	if (WARN_ON(i == g->nfuncs))
 		return -EINVAL;
 
+	/*
+	 * If an GPIO interrupt is setup on this pin then we need special
+	 * handling.  Specifically interrupt detection logic will still see
+	 * the pin twiddle even when we're muxed away.
+	 *
+	 * When we see a pin with an interrupt setup on it then we'll disable
+	 * (mask) interrupts on it when we mux away until we mux back.  Note
+	 * that disable_irq() refcounts and interrupts are disabled as long as
+	 * at least one disable_irq() has been called.
+	 */
+	if (d && i != gpio_func &&
+	    !test_and_set_bit(d->hwirq, pctrl->disabled_for_mux))
+		disable_irq(irq);
+
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
 	val = msm_readl_ctl(pctrl, g);
@@ -196,6 +224,20 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
 
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 
+	if (d && i == gpio_func &&
+	    test_and_clear_bit(d->hwirq, pctrl->disabled_for_mux)) {
+		/*
+		 * Clear interrupts detected while not GPIO since we only
+		 * masked things.
+		 */
+		if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
+			irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, false);
+		else
+			msm_ack_intr_status(pctrl, g);
+
+		enable_irq(irq);
+	}
+
 	return 0;
 }
 
@@ -210,8 +252,7 @@ static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
 	if (!g->nfuncs)
 		return 0;
 
-	/* For now assume function 0 is GPIO because it always is */
-	return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
+	return msm_pinmux_set_mux(pctldev, g->funcs[pctrl->soc->gpio_func], offset);
 }
 
 static const struct pinmux_ops msm_pinmux_ops = {
@@ -774,7 +815,7 @@ static void msm_gpio_irq_mask(struct irq_data *d)
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 }
 
-static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
+static void msm_gpio_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
@@ -792,17 +833,6 @@ static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
-	if (status_clear) {
-		/*
-		 * clear the interrupt status bit before unmask to avoid
-		 * any erroneous interrupts that would have got latched
-		 * when the interrupt is not in use.
-		 */
-		val = msm_readl_intr_status(pctrl, g);
-		val &= ~BIT(g->intr_status_bit);
-		msm_writel_intr_status(val, pctrl, g);
-	}
-
 	val = msm_readl_intr_cfg(pctrl, g);
 	val |= BIT(g->intr_raw_status_bit);
 	val |= BIT(g->intr_enable_bit);
@@ -822,7 +852,7 @@ static void msm_gpio_irq_enable(struct irq_data *d)
 		irq_chip_enable_parent(d);
 
 	if (!test_bit(d->hwirq, pctrl->skip_wake_irqs))
-		msm_gpio_irq_clear_unmask(d, true);
+		msm_gpio_irq_unmask(d);
 }
 
 static void msm_gpio_irq_disable(struct irq_data *d)
@@ -837,11 +867,6 @@ static void msm_gpio_irq_disable(struct irq_data *d)
 		msm_gpio_irq_mask(d);
 }
 
-static void msm_gpio_irq_unmask(struct irq_data *d)
-{
-	msm_gpio_irq_clear_unmask(d, false);
-}
-
 /**
  * msm_gpio_update_dual_edge_parent() - Prime next edge for IRQs handled by parent.
  * @d: The irq dta.
@@ -894,7 +919,6 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
 	const struct msm_pingroup *g;
 	unsigned long flags;
-	u32 val;
 
 	if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
 		if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -906,12 +930,7 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
-	val = msm_readl_intr_status(pctrl, g);
-	if (g->intr_ack_high)
-		val |= BIT(g->intr_status_bit);
-	else
-		val &= ~BIT(g->intr_status_bit);
-	msm_writel_intr_status(val, pctrl, g);
+	msm_ack_intr_status(pctrl, g);
 
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
 		msm_gpio_update_dual_edge_pos(pctrl, g, d);
@@ -936,6 +955,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
 	const struct msm_pingroup *g;
 	unsigned long flags;
+	bool was_enabled;
 	u32 val;
 
 	if (msm_gpio_needs_dual_edge_parent_workaround(d, type)) {
@@ -997,6 +1017,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	 * could cause the INTR_STATUS to be set for EDGE interrupts.
 	 */
 	val = msm_readl_intr_cfg(pctrl, g);
+	was_enabled = val & BIT(g->intr_raw_status_bit);
 	val |= BIT(g->intr_raw_status_bit);
 	if (g->intr_detection_width == 2) {
 		val &= ~(3 << g->intr_detection_bit);
@@ -1046,6 +1067,14 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	}
 	msm_writel_intr_cfg(val, pctrl, g);
 
+	/*
+	 * The first time we set RAW_STATUS_EN it could trigger an interrupt.
+	 * Clear the interrupt.  This is safe because we have
+	 * IRQCHIP_SET_TYPE_MASKED.
+	 */
+	if (!was_enabled)
+		msm_ack_intr_status(pctrl, g);
+
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
 		msm_gpio_update_dual_edge_pos(pctrl, g, d);
 
@@ -1099,16 +1128,11 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
 	}
 
 	/*
-	 * Clear the interrupt that may be pending before we enable
-	 * the line.
-	 * This is especially a problem with the GPIOs routed to the
-	 * PDC. These GPIOs are direct-connect interrupts to the GIC.
-	 * Disabling the interrupt line at the PDC does not prevent
-	 * the interrupt from being latched at the GIC. The state at
-	 * GIC needs to be cleared before enabling.
+	 * The disable / clear-enable workaround we do in msm_pinmux_set_mux()
+	 * only works if disable is not lazy since we only clear any bogus
+	 * interrupt in hardware. Explicitly mark the interrupt as UNLAZY.
 	 */
-	if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
-		irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, 0);
+	irq_set_status_flags(d->irq, IRQ_DISABLE_UNLAZY);
 
 	return 0;
 out: