Merge tag 'phy-for-4.15_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.15

 *) Add support in phy core to perform phy calibration
 *) Return NULL for optional PHY's even if CONFIG_GENERIC_PHY is not selected
 *) Add USB Phy driver for Broadcom STB SoCs
 *) Add support to force mediatek PHY with USB OTG function to enter
    a specific mode
 *) Calibrate rockchip-typec PHY according to docs
 *) Enable dual route feature for sun4i-usb in V3s SoC
 *) Use dr_mode dt property to enable otg capability in rcar-gen3-usb2
 *) Add driver data to specify dedicated otg pins in rcar-gen3-usb2 driver
 *) Configure the RX equalizer of brcm-sata PHY
 *) Update pcie phy settings for ti-pipe3 phy
 *) Add set_mode callback in qcom-ufs-qmp-14nm phy
 *) Use PHY callbacks in phy-qcom-ufs instead of export APIs

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

17 files changed, 2062 insertions, 103 deletions

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 1161e11fb3cf..a2fbc7b00b9a 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -926,6 +926,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
 	.enable_pmu_unk1 = true,
+	.phy0_dual_route = true,
 };
 
 static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 64fc59c3ae6d..97d27b0d5cc7 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -67,3 +67,16 @@ config PHY_BRCM_SATA
 	help
 	  Enable this to support the Broadcom SATA PHY.
 	  If unsure, say N.
+
+config PHY_BRCM_USB
+	tristate "Broadcom STB USB PHY driver"
+	depends on ARCH_BRCMSTB
+	depends on OF
+	select GENERIC_PHY
+	select SOC_BRCMSTB
+	default ARCH_BRCMSTB
+	help
+	  Enable this to support the Broadcom STB USB PHY.
+	  This driver is required by the USB XHCI, EHCI and OHCI
+	  drivers.
+	  If unsure, say N.
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
index 4eb82ec8d491..7c37ba651440 100644
--- a/drivers/phy/broadcom/Makefile
+++ b/drivers/phy/broadcom/Makefile
@@ -5,3 +5,6 @@ obj-$(CONFIG_PHY_BCM_NS_USB3)		+= phy-bcm-ns-usb3.o
 obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o
 obj-$(CONFIG_PHY_NS2_USB_DRD)		+= phy-bcm-ns2-usbdrd.o
 obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
+obj-$(CONFIG_PHY_BRCM_USB)		+= phy-brcm-usb-dvr.o
+
+phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 9d7f74fe3d7c..3f953db70288 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -49,11 +49,29 @@ enum brcm_sata_phy_version {
 	BRCM_SATA_PHY_IPROC_SR,
 };
 
+enum brcm_sata_phy_rxaeq_mode {
+	RXAEQ_MODE_OFF = 0,
+	RXAEQ_MODE_AUTO,
+	RXAEQ_MODE_MANUAL,
+};
+
+static enum brcm_sata_phy_rxaeq_mode rxaeq_to_val(const char *m)
+{
+	if (!strcmp(m, "auto"))
+		return RXAEQ_MODE_AUTO;
+	else if (!strcmp(m, "manual"))
+		return RXAEQ_MODE_MANUAL;
+	else
+		return RXAEQ_MODE_OFF;
+}
+
 struct brcm_sata_port {
 	int portnum;
 	struct phy *phy;
 	struct brcm_sata_phy *phy_priv;
 	bool ssc_en;
+	enum brcm_sata_phy_rxaeq_mode rxaeq_mode;
+	u32 rxaeq_val;
 };
 
 struct brcm_sata_phy {
@@ -93,6 +111,15 @@ enum sata_phy_regs {
 	TX_ACTRL0				= 0x80,
 	TX_ACTRL0_TXPOL_FLIP			= BIT(6),
 
+	AEQRX_REG_BANK_0			= 0xd0,
+	AEQ_CONTROL1				= 0x81,
+	AEQ_CONTROL1_ENABLE			= BIT(2),
+	AEQ_CONTROL1_FREEZE			= BIT(3),
+	AEQ_FRC_EQ				= 0x83,
+	AEQ_FRC_EQ_FORCE			= BIT(0),
+	AEQ_FRC_EQ_FORCE_VAL			= BIT(1),
+	AEQRX_REG_BANK_1			= 0xe0,
+
 	OOB_REG_BANK				= 0x150,
 	OOB1_REG_BANK				= 0x160,
 	OOB_CTRL1				= 0x80,
@@ -190,7 +217,7 @@ static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
 #define STB_FMAX_VAL_DEFAULT	0x3df
 #define STB_FMAX_VAL_SSC	0x83
 
-static int brcm_stb_sata_init(struct brcm_sata_port *port)
+static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port)
 {
 	void __iomem *base = brcm_sata_pcb_base(port);
 	struct brcm_sata_phy *priv = port->phy_priv;
@@ -215,10 +242,47 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port)
 
 	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
 			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+}
+
+#define AEQ_FRC_EQ_VAL_SHIFT	2
+#define AEQ_FRC_EQ_VAL_MASK	0x3f
+
+static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port)
+{
+	void __iomem *base = brcm_sata_pcb_base(port);
+	u32 tmp = 0, reg = 0;
+
+	switch (port->rxaeq_mode) {
+	case RXAEQ_MODE_OFF:
+		return 0;
+
+	case RXAEQ_MODE_AUTO:
+		reg = AEQ_CONTROL1;
+		tmp = AEQ_CONTROL1_ENABLE | AEQ_CONTROL1_FREEZE;
+		break;
+
+	case RXAEQ_MODE_MANUAL:
+		reg = AEQ_FRC_EQ;
+		tmp = AEQ_FRC_EQ_FORCE | AEQ_FRC_EQ_FORCE_VAL;
+		if (port->rxaeq_val > AEQ_FRC_EQ_VAL_MASK)
+			return -EINVAL;
+		tmp |= port->rxaeq_val << AEQ_FRC_EQ_VAL_SHIFT;
+		break;
+	}
+
+	brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, reg, ~tmp, tmp);
+	brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, reg, ~tmp, tmp);
 
 	return 0;
 }
 
+static int brcm_stb_sata_init(struct brcm_sata_port *port)
+{
+	brcm_stb_sata_ssc_init(port);
+
+	return brcm_stb_sata_rxaeq_init(port);
+}
+
 /* NS2 SATA PLL1 defaults were characterized by H/W group */
 #define NS2_PLL1_ACTRL2_MAGIC	0x1df8
 #define NS2_PLL1_ACTRL3_MAGIC	0x2b00
@@ -463,6 +527,7 @@ MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
 
 static int brcm_sata_phy_probe(struct platform_device *pdev)
 {
+	const char *rxaeq_mode;
 	struct device *dev = &pdev->dev;
 	struct device_node *dn = dev->of_node, *child;
 	const struct of_device_id *of_id;
@@ -525,6 +590,13 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		port->portnum = id;
 		port->phy_priv = priv;
 		port->phy = devm_phy_create(dev, child, &phy_ops);
+		port->rxaeq_mode = RXAEQ_MODE_OFF;
+		if (!of_property_read_string(child, "brcm,rxaeq-mode",
+					     &rxaeq_mode))
+			port->rxaeq_mode = rxaeq_to_val(rxaeq_mode);
+		if (port->rxaeq_mode == RXAEQ_MODE_MANUAL)
+			of_property_read_u32(child, "brcm,rxaeq-value",
+					     &port->rxaeq_val);
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
new file mode 100644
index 000000000000..1e7ce0b6f299
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -0,0 +1,1017 @@
+/*
+ * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions
+ *
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This module contains USB PHY initialization for power up and S3 resume
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/soc/brcmstb/brcmstb.h>
+#include "phy-brcm-usb-init.h"
+
+#define PHY_PORTS 2
+#define PHY_PORT_SELECT_0 0
+#define PHY_PORT_SELECT_1 0x1000
+
+/* Register definitions for the USB CTRL block */
+#define USB_CTRL_SETUP			0x00
+#define   USB_CTRL_SETUP_IOC_MASK			0x00000010
+#define   USB_CTRL_SETUP_IPP_MASK			0x00000020
+#define   USB_CTRL_SETUP_BABO_MASK			0x00000001
+#define   USB_CTRL_SETUP_FNHW_MASK			0x00000002
+#define   USB_CTRL_SETUP_FNBO_MASK			0x00000004
+#define   USB_CTRL_SETUP_WABO_MASK			0x00000008
+#define   USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK		0x00002000 /* option */
+#define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000 /* option */
+#define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000 /* option */
+#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK		0X00020000 /* option */
+#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK	0x00010000 /* option */
+#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000 /* option */
+#define   USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK	0x04000000 /* option */
+#define   USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK 0x08000000 /* opt */
+#define   USB_CTRL_SETUP_OC3_DISABLE_MASK		0xc0000000 /* option */
+#define USB_CTRL_PLL_CTL		0x04
+#define   USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK		0x08000000
+#define   USB_CTRL_PLL_CTL_PLL_RESETB_MASK		0x40000000
+#define   USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK		0x80000000 /* option */
+#define USB_CTRL_EBRIDGE		0x0c
+#define   USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK		0x00020000 /* option */
+#define USB_CTRL_MDIO			0x14
+#define USB_CTRL_MDIO2			0x18
+#define USB_CTRL_UTMI_CTL_1		0x2c
+#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
+#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK	0x08000000
+#define USB_CTRL_USB_PM			0x34
+#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		0x00800000 /* option */
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		0x00400000 /* option */
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK	0x40000000 /* option */
+#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		0x80000000 /* option */
+#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000 /* option */
+#define   USB_CTRL_USB_PM_USB20_HC_RESETB_MASK		0x30000000 /* option */
+#define   USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK	0x00300000 /* option */
+#define USB_CTRL_USB30_CTL1		0x60
+#define   USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK	0x00000010
+#define   USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK		0x00010000
+#define   USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK	0x00020000 /* option */
+#define   USB_CTRL_USB30_CTL1_USB3_IOC_MASK		0x10000000 /* option */
+#define   USB_CTRL_USB30_CTL1_USB3_IPP_MASK		0x20000000 /* option */
+#define USB_CTRL_USB30_PCTL		0x70
+#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK	0x00000002
+#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK	0x00020000
+#define USB_CTRL_USB_DEVICE_CTL1	0x90
+#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003 /* option */
+
+/* Register definitions for the XHCI EC block */
+#define USB_XHCI_EC_IRAADR 0x658
+#define USB_XHCI_EC_IRADAT 0x65c
+
+enum brcm_family_type {
+	BRCM_FAMILY_3390A0,
+	BRCM_FAMILY_7250B0,
+	BRCM_FAMILY_7271A0,
+	BRCM_FAMILY_7364A0,
+	BRCM_FAMILY_7366C0,
+	BRCM_FAMILY_74371A0,
+	BRCM_FAMILY_7439B0,
+	BRCM_FAMILY_7445D0,
+	BRCM_FAMILY_7260A0,
+	BRCM_FAMILY_7278A0,
+	BRCM_FAMILY_COUNT,
+};
+
+#define USB_BRCM_FAMILY(chip) \
+	[BRCM_FAMILY_##chip] = __stringify(chip)
+
+static const char *family_names[BRCM_FAMILY_COUNT] = {
+	USB_BRCM_FAMILY(3390A0),
+	USB_BRCM_FAMILY(7250B0),
+	USB_BRCM_FAMILY(7271A0),
+	USB_BRCM_FAMILY(7364A0),
+	USB_BRCM_FAMILY(7366C0),
+	USB_BRCM_FAMILY(74371A0),
+	USB_BRCM_FAMILY(7439B0),
+	USB_BRCM_FAMILY(7445D0),
+	USB_BRCM_FAMILY(7260A0),
+	USB_BRCM_FAMILY(7278A0),
+};
+
+enum {
+	USB_CTRL_SETUP_SCB1_EN_SELECTOR,
+	USB_CTRL_SETUP_SCB2_EN_SELECTOR,
+	USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR,
+	USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR,
+	USB_CTRL_SETUP_OC3_DISABLE_SELECTOR,
+	USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR,
+	USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_SELECTOR,
+	USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR,
+	USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR,
+	USB_CTRL_USB_PM_USB_PWRDN_SELECTOR,
+	USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR,
+	USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR,
+	USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR,
+	USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR,
+	USB_CTRL_USB_PM_SOFT_RESET_SELECTOR,
+	USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR,
+	USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR,
+	USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR,
+	USB_CTRL_SETUP_ENDIAN_SELECTOR,
+	USB_CTRL_SELECTOR_COUNT,
+};
+
+#define USB_CTRL_REG(base, reg)	((void *)base + USB_CTRL_##reg)
+#define USB_XHCI_EC_REG(base, reg) ((void *)base + USB_XHCI_EC_##reg)
+#define USB_CTRL_MASK(reg, field) \
+	USB_CTRL_##reg##_##field##_MASK
+#define USB_CTRL_MASK_FAMILY(params, reg, field)			\
+	(params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR])
+
+#define USB_CTRL_SET_FAMILY(params, reg, field)	\
+	usb_ctrl_set_family(params, USB_CTRL_##reg,	\
+			USB_CTRL_##reg##_##field##_SELECTOR)
+#define USB_CTRL_UNSET_FAMILY(params, reg, field)	\
+	usb_ctrl_unset_family(params, USB_CTRL_##reg,	\
+		USB_CTRL_##reg##_##field##_SELECTOR)
+
+#define USB_CTRL_SET(base, reg, field)	\
+	usb_ctrl_set(USB_CTRL_REG(base, reg),		\
+		     USB_CTRL_##reg##_##field##_MASK)
+#define USB_CTRL_UNSET(base, reg, field)	\
+	usb_ctrl_unset(USB_CTRL_REG(base, reg),		\
+		       USB_CTRL_##reg##_##field##_MASK)
+
+#define MDIO_USB2	0
+#define MDIO_USB3	BIT(31)
+
+#define USB_CTRL_SETUP_ENDIAN_BITS (	\
+		USB_CTRL_MASK(SETUP, BABO) |	\
+		USB_CTRL_MASK(SETUP, FNHW) |	\
+		USB_CTRL_MASK(SETUP, FNBO) |	\
+		USB_CTRL_MASK(SETUP, WABO))
+
+#ifdef __LITTLE_ENDIAN
+#define ENDIAN_SETTINGS (			\
+		USB_CTRL_MASK(SETUP, BABO) |	\
+		USB_CTRL_MASK(SETUP, FNHW))
+#else
+#define ENDIAN_SETTINGS (			\
+		USB_CTRL_MASK(SETUP, FNHW) |	\
+		USB_CTRL_MASK(SETUP, FNBO) |	\
+		USB_CTRL_MASK(SETUP, WABO))
+#endif
+
+struct id_to_type {
+	u32 id;
+	int type;
+};
+
+static const struct id_to_type id_to_type_table[] = {
+	{ 0x33900000, BRCM_FAMILY_3390A0 },
+	{ 0x72500010, BRCM_FAMILY_7250B0 },
+	{ 0x72600000, BRCM_FAMILY_7260A0 },
+	{ 0x72680000, BRCM_FAMILY_7271A0 },
+	{ 0x72710000, BRCM_FAMILY_7271A0 },
+	{ 0x73640000, BRCM_FAMILY_7364A0 },
+	{ 0x73660020, BRCM_FAMILY_7366C0 },
+	{ 0x07437100, BRCM_FAMILY_74371A0 },
+	{ 0x74390010, BRCM_FAMILY_7439B0 },
+	{ 0x74450030, BRCM_FAMILY_7445D0 },
+	{ 0x72780000, BRCM_FAMILY_7278A0 },
+	{ 0, BRCM_FAMILY_7271A0 }, /* default */
+};
+
+static const u32
+usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
+	/* 3390B0 */
+	[BRCM_FAMILY_3390A0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7250b0 */
+	[BRCM_FAMILY_7250B0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7271a0 */
+	[BRCM_FAMILY_7271A0] = {
+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		USB_CTRL_USB_PM_SOFT_RESET_MASK,
+		USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK,
+		USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK,
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7364a0 */
+	[BRCM_FAMILY_7364A0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7366c0 */
+	[BRCM_FAMILY_7366C0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 74371A0 */
+	[BRCM_FAMILY_74371A0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB30_CTL1_USB3_IOC_MASK,
+		USB_CTRL_USB30_CTL1_USB3_IPP_MASK,
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7439B0 */
+	[BRCM_FAMILY_7439B0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7445d0 */
+	[BRCM_FAMILY_7445D0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK,
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7260a0 */
+	[BRCM_FAMILY_7260A0] = {
+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		USB_CTRL_USB_PM_SOFT_RESET_MASK,
+		USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK,
+		USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK,
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7278a0 */
+	[BRCM_FAMILY_7278A0] = {
+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+		0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		USB_CTRL_USB_PM_SOFT_RESET_MASK,
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */
+		0, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+};
+
+static inline u32 brcmusb_readl(void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void brcmusb_writel(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+
+static inline
+void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
+			   u32 reg_offset, u32 field)
+{
+	u32 mask;
+	void *reg;
+
+	mask = params->usb_reg_bits_map[field];
+	reg = params->ctrl_regs + reg_offset;
+	brcmusb_writel(brcmusb_readl(reg) & ~mask, reg);
+};
+
+static inline
+void usb_ctrl_set_family(struct brcm_usb_init_params *params,
+			 u32 reg_offset, u32 field)
+{
+	u32 mask;
+	void *reg;
+
+	mask = params->usb_reg_bits_map[field];
+	reg = params->ctrl_regs + reg_offset;
+	brcmusb_writel(brcmusb_readl(reg) | mask, reg);
+};
+
+static inline void usb_ctrl_set(void __iomem *reg, u32 field)
+{
+	u32 value;
+
+	value = brcmusb_readl(reg);
+	brcmusb_writel(value | field, reg);
+}
+
+static inline void usb_ctrl_unset(void __iomem *reg, u32 field)
+{
+	u32 value;
+
+	value = brcmusb_readl(reg);
+	brcmusb_writel(value & ~field, reg);
+}
+
+static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
+{
+	u32 data;
+
+	data = (reg << 16) | mode;
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data |= (1 << 24);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data &= ~(1 << 24);
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+
+	return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
+}
+
+static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
+				   u32 val, int mode)
+{
+	u32 data;
+
+	data = (reg << 16) | val | mode;
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data |= (1 << 25);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data &= ~(1 << 25);
+
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+}
+
+static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base)
+{
+	/* first disable FSM but also leave it that way */
+	/* to allow normal suspend/resume */
+	USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN);
+	USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1);
+
+	/* reset USB 2.0 PLL */
+	USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB);
+	/* PLL reset period */
+	udelay(1);
+	USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB);
+	/* Give PLL enough time to lock */
+	usleep_range(1000, 2000);
+}
+
+static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base)
+{
+	/* Increase USB 2.0 TX level to meet spec requirement */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2);
+	brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2);
+}
+
+static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base)
+{
+	/* Set correct window for PLL lock detect */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3);
+}
+
+static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base)
+{
+	u32 val;
+
+	/* Re-enable USB 3.0 pipe reset */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
+	val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200;
+	brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3);
+}
+
+static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base)
+{
+	u32 val, ofs;
+	int ii;
+
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		/* Set correct default for sigdet */
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs),
+				       MDIO_USB3);
+		val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3);
+		val = (val & ~0x800f) | 0x800d;
+		brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+}
+
+static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base)
+{
+	u32 val, ofs;
+	int ii;
+
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		/* Set correct default for SKIP align */
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs),
+				       MDIO_USB3);
+		val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200;
+		brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+}
+
+static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base)
+{
+	u32 val, ofs;
+	int ii;
+
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		/* Let EQ freeze after TSEQ */
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs),
+				       MDIO_USB3);
+		val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3);
+		val &= ~0x0008;
+		brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+}
+
+static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params)
+{
+	u32 ofs;
+	int ii;
+	void __iomem *ctrl_base = params->ctrl_regs;
+
+	/*
+	 * On newer B53 based SoC's, the reference clock for the
+	 * 3.0 PLL has been changed from 50MHz to 54MHz so the
+	 * PLL needs to be reprogrammed.
+	 * See SWLINUX-4006.
+	 *
+	 * On the 7364C0, the reference clock for the
+	 * 3.0 PLL has been changed from 50MHz to 54MHz to
+	 * work around a MOCA issue.
+	 * See SWLINUX-4169.
+	 */
+	switch (params->selected_family) {
+	case BRCM_FAMILY_3390A0:
+	case BRCM_FAMILY_7250B0:
+	case BRCM_FAMILY_7366C0:
+	case BRCM_FAMILY_74371A0:
+	case BRCM_FAMILY_7439B0:
+	case BRCM_FAMILY_7445D0:
+	case BRCM_FAMILY_7260A0:
+		return;
+	case BRCM_FAMILY_7364A0:
+		if (BRCM_REV(params->family_id) < 0x20)
+			return;
+		break;
+	}
+
+	/* set USB 3.0 PLL to accept 54Mhz reference clock */
+	USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START);
+
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3);
+
+	/* both ports */
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs),
+				       MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs),
+				       MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+
+	/* restart PLL sequence */
+	USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START);
+	/* Give PLL enough time to lock */
+	usleep_range(1000, 2000);
+}
+
+static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base)
+{
+	u32 val;
+
+	/* Enable USB 3.0 TX spread spectrum */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3);
+	val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf;
+	brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+
+	/* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers,
+	 * which should have been adequate. However, due to a bug in the
+	 * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26).
+	 */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3);
+	val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf;
+	brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+}
+
+static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl_base = params->ctrl_regs;
+
+	brcmusb_usb3_pll_fix(ctrl_base);
+	brcmusb_usb3_pll_54mhz(params);
+	brcmusb_usb3_ssc_enable(ctrl_base);
+	brcmusb_usb3_enable_pipe_reset(ctrl_base);
+	brcmusb_usb3_enable_sigdet(ctrl_base);
+	brcmusb_usb3_enable_skip_align(ctrl_base);
+	brcmusb_usb3_unfreeze_aeq(ctrl_base);
+}
+
+static void brcmusb_memc_fix(struct brcm_usb_init_params *params)
+{
+	u32 prid;
+
+	if (params->selected_family != BRCM_FAMILY_7445D0)
+		return;
+	/*
+	 * This is a workaround for HW7445-1869 where a DMA write ends up
+	 * doing a read pre-fetch after the end of the DMA buffer. This
+	 * causes a problem when the DMA buffer is at the end of physical
+	 * memory, causing the pre-fetch read to access non-existent memory,
+	 * and the chip bondout has MEMC2 disabled. When the pre-fetch read
+	 * tries to use the disabled MEMC2, it hangs the bus. The workaround
+	 * is to disable MEMC2 access in the usb controller which avoids
+	 * the hang.
+	 */
+
+	prid = params->product_id & 0xfffff000;
+	switch (prid) {
+	case 0x72520000:
+	case 0x74480000:
+	case 0x74490000:
+	case 0x07252000:
+	case 0x07448000:
+	case 0x07449000:
+		USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN);
+	}
+}
+
+static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)
+{
+	void __iomem *xhci_ec_base = params->xhci_ec_regs;
+	u32 val;
+
+	if (params->family_id != 0x74371000 || xhci_ec_base == 0)
+		return;
+	brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
+	val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
+
+	/* set cfg_pick_ss_lock */
+	val |= (1 << 27);
+	brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
+
+	/* Reset USB 3.0 PHY for workaround to take effect */
+	USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB);
+	USB_CTRL_SET(params->ctrl_regs,	USB30_CTL1, PHY3_RESETB);
+}
+
+static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params,
+				    int on_off)
+{
+	/* Assert reset */
+	if (on_off) {
+		if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB))
+			USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB);
+		else
+			USB_CTRL_UNSET_FAMILY(params,
+					      USB30_CTL1, XHC_SOFT_RESETB);
+	} else { /* De-assert reset */
+		if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB))
+			USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB);
+		else
+			USB_CTRL_SET_FAMILY(params, USB30_CTL1,
+					    XHC_SOFT_RESETB);
+	}
+}
+
+/*
+ * Return the best map table family. The order is:
+ *   - exact match of chip and major rev
+ *   - exact match of chip and closest older major rev
+ *   - default chip/rev.
+ * NOTE: The minor rev is always ignored.
+ */
+static enum brcm_family_type brcmusb_get_family_type(
+	struct brcm_usb_init_params *params)
+{
+	int last_type = -1;
+	u32 last_family = 0;
+	u32 family_no_major;
+	unsigned int x;
+	u32 family;
+
+	family = params->family_id & 0xfffffff0;
+	family_no_major = params->family_id & 0xffffff00;
+	for (x = 0; id_to_type_table[x].id; x++) {
+		if (family == id_to_type_table[x].id)
+			return id_to_type_table[x].type;
+		if (family_no_major == (id_to_type_table[x].id & 0xffffff00))
+			if (family > id_to_type_table[x].id &&
+			    last_family < id_to_type_table[x].id) {
+				last_family = id_to_type_table[x].id;
+				last_type = id_to_type_table[x].type;
+			}
+	}
+
+	/* If no match, return the default family */
+	if (last_type == -1)
+		return id_to_type_table[x].type;
+	return last_type;
+}
+
+void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+	u32 reg;
+	u32 orig_reg;
+
+	/* Starting with the 7445d0, there are no longer separate 3.0
+	 * versions of IOC and IPP.
+	 */
+	if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) {
+		if (params->ioc)
+			USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC);
+		if (params->ipp == 1)
+			USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP);
+	}
+
+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+	orig_reg = reg;
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL))
+		/* Never use the strap, it's going away. */
+		reg &= ~(USB_CTRL_MASK_FAMILY(params,
+					      SETUP,
+					      STRAP_CC_DRD_MODE_ENABLE_SEL));
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL))
+		if (params->ipp != 2)
+			/* override ipp strap pin (if it exits) */
+			reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP,
+						      STRAP_IPP_SEL));
+
+	/* Override the default OC and PP polarity */
+	reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
+	if (params->ioc)
+		reg |= USB_CTRL_MASK(SETUP, IOC);
+	if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0))
+		reg |= USB_CTRL_MASK(SETUP, IPP);
+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+
+	/*
+	 * If we're changing IPP, make sure power is off long enough
+	 * to turn off any connected devices.
+	 */
+	if (reg != orig_reg)
+		msleep(50);
+}
+
+int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+	u32 reg = 0;
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+		reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+					PORT_MODE);
+	}
+	return reg;
+}
+
+void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
+				   int mode)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+	u32 reg;
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+					PORT_MODE);
+		reg |= mode;
+		brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+	}
+}
+
+void brcm_usb_init_common(struct brcm_usb_init_params *params)
+{
+	u32 reg;
+	void __iomem *ctrl = params->ctrl_regs;
+
+	/* Take USB out of power down */
+	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
+		USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
+		/* 1 millisecond - for USB clocks to settle down */
+		usleep_range(1000, 2000);
+	}
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) {
+		USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN);
+		/* 1 millisecond - for USB clocks to settle down */
+		usleep_range(1000, 2000);
+	}
+
+	if (params->selected_family != BRCM_FAMILY_74371A0 &&
+	    (BRCM_ID(params->family_id) != 0x7364))
+		/*
+		 * HW7439-637: 7439a0 and its derivatives do not have large
+		 * enough descriptor storage for this.
+		 */
+		USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN);
+
+	/* Block auto PLL suspend by USB2 PHY (Sasi) */
+	USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN);
+
+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+	if (params->selected_family == BRCM_FAMILY_7364A0)
+		/* Suppress overcurrent indication from USB30 ports for A0 */
+		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE);
+
+	brcmusb_usb_phy_ldo_fix(ctrl);
+	brcmusb_usb2_eye_fix(ctrl);
+
+	/*
+	 * Make sure the the second and third memory controller
+	 * interfaces are enabled if they exist.
+	 */
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN))
+		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN);
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN))
+		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN);
+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+
+	brcmusb_memc_fix(params);
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+					PORT_MODE);
+		reg |= params->mode;
+		brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+	}
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
+		switch (params->mode) {
+		case USB_CTLR_MODE_HOST:
+			USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
+			break;
+		default:
+			USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
+		break;
+		}
+	}
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) {
+		if (params->mode == USB_CTLR_MODE_TYPEC_PD)
+			USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE);
+		else
+			USB_CTRL_UNSET_FAMILY(params, SETUP,
+					      CC_DRD_MODE_ENABLE);
+	}
+}
+
+void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
+{
+	u32 reg;
+	void __iomem *ctrl = params->ctrl_regs;
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
+		USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB);
+
+	if (params->selected_family == BRCM_FAMILY_7366C0)
+		/*
+		 * Don't enable this so the memory controller doesn't read
+		 * into memory holes. NOTE: This bit is low true on 7366C0.
+		 */
+		USB_CTRL_SET_FAMILY(params, EBRIDGE, ESTOP_SCB_REQ);
+
+	/* Setup the endian bits */
+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+	reg &= ~USB_CTRL_SETUP_ENDIAN_BITS;
+	reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN);
+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+}
+
+void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+
+	if (BRCM_ID(params->family_id) == 0x7366) {
+		/*
+		 * The PHY3_SOFT_RESETB bits default to the wrong state.
+		 */
+		USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB);
+		USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1);
+	}
+
+	/*
+	 * Kick start USB3 PHY
+	 * Make sure it's low to insure a rising edge.
+	 */
+	USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START);
+	USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START);
+
+	brcmusb_usb3_phy_workarounds(params);
+	brcmusb_xhci_soft_reset(params, 0);
+	brcmusb_usb3_otp_fix(params);
+}
+
+void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
+{
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN))
+		USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN);
+
+	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN))
+		USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
+}
+
+void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
+{
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
+		USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB);
+}
+
+void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
+{
+	brcmusb_xhci_soft_reset(params, 1);
+}
+
+void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
+{
+	int fam;
+
+	fam = brcmusb_get_family_type(params);
+	params->selected_family = fam;
+	params->usb_reg_bits_map =
+		&usb_reg_bits_map_table[fam][0];
+	params->family_name = family_names[fam];
+}
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h
new file mode 100644
index 000000000000..bb77b863885e
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _USB_BRCM_COMMON_INIT_H
+#define _USB_BRCM_COMMON_INIT_H
+
+#define USB_CTLR_MODE_HOST 0
+#define USB_CTLR_MODE_DEVICE 1
+#define USB_CTLR_MODE_DRD 2
+#define USB_CTLR_MODE_TYPEC_PD 3
+
+struct  brcm_usb_init_params;
+
+struct  brcm_usb_init_params {
+	void __iomem *ctrl_regs;
+	void __iomem *xhci_ec_regs;
+	int ioc;
+	int ipp;
+	int mode;
+	u32 family_id;
+	u32 product_id;
+	int selected_family;
+	const char *family_name;
+	const u32 *usb_reg_bits_map;
+};
+
+void brcm_usb_set_family_map(struct brcm_usb_init_params *params);
+int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params);
+void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
+				   int mode);
+
+void brcm_usb_init_ipp(struct brcm_usb_init_params *ini);
+void brcm_usb_init_common(struct brcm_usb_init_params *ini);
+void brcm_usb_init_eohci(struct brcm_usb_init_params *ini);
+void brcm_usb_init_xhci(struct brcm_usb_init_params *ini);
+void brcm_usb_uninit_common(struct brcm_usb_init_params *ini);
+void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini);
+void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini);
+
+#endif /* _USB_BRCM_COMMON_INIT_H */
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
new file mode 100644
index 000000000000..195b98139e5f
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -0,0 +1,459 @@
+/*
+ * phy-brcm-usb.c - Broadcom USB Phy Driver
+ *
+ * Copyright (C) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-brcm-usb-init.h"
+
+static DEFINE_MUTEX(sysfs_lock);
+
+enum brcm_usb_phy_id {
+	BRCM_USB_PHY_2_0 = 0,
+	BRCM_USB_PHY_3_0,
+	BRCM_USB_PHY_ID_MAX
+};
+
+struct value_to_name_map {
+	int value;
+	const char *name;
+};
+
+static struct value_to_name_map brcm_dr_mode_to_name[] = {
+	{ USB_CTLR_MODE_HOST, "host" },
+	{ USB_CTLR_MODE_DEVICE, "peripheral" },
+	{ USB_CTLR_MODE_DRD, "drd" },
+	{ USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
+};
+
+static struct value_to_name_map brcm_dual_mode_to_name[] = {
+	{ 0, "host" },
+	{ 1, "device" },
+	{ 2, "auto" },
+};
+
+struct brcm_usb_phy {
+	struct phy *phy;
+	unsigned int id;
+	bool inited;
+};
+
+struct brcm_usb_phy_data {
+	struct  brcm_usb_init_params ini;
+	bool			has_eohci;
+	bool			has_xhci;
+	struct clk		*usb_20_clk;
+	struct clk		*usb_30_clk;
+	struct mutex		mutex;	/* serialize phy init */
+	int			init_count;
+	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
+};
+
+static int brcm_usb_phy_init(struct phy *gphy)
+{
+	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
+	struct brcm_usb_phy_data *priv =
+		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+
+	/*
+	 * Use a lock to make sure a second caller waits until
+	 * the base phy is inited before using it.
+	 */
+	mutex_lock(&priv->mutex);
+	if (priv->init_count++ == 0) {
+		clk_enable(priv->usb_20_clk);
+		clk_enable(priv->usb_30_clk);
+		brcm_usb_init_common(&priv->ini);
+	}
+	mutex_unlock(&priv->mutex);
+	if (phy->id == BRCM_USB_PHY_2_0)
+		brcm_usb_init_eohci(&priv->ini);
+	else if (phy->id == BRCM_USB_PHY_3_0)
+		brcm_usb_init_xhci(&priv->ini);
+	phy->inited = true;
+	dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id,
+		priv->init_count);
+
+	return 0;
+}
+
+static int brcm_usb_phy_exit(struct phy *gphy)
+{
+	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
+	struct brcm_usb_phy_data *priv =
+		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+
+	dev_dbg(&gphy->dev, "EXIT\n");
+	if (phy->id == BRCM_USB_PHY_2_0)
+		brcm_usb_uninit_eohci(&priv->ini);
+	if (phy->id == BRCM_USB_PHY_3_0)
+		brcm_usb_uninit_xhci(&priv->ini);
+
+	/* If both xhci and eohci are gone, reset everything else */
+	mutex_lock(&priv->mutex);
+	if (--priv->init_count == 0) {
+		brcm_usb_uninit_common(&priv->ini);
+		clk_disable(priv->usb_20_clk);
+		clk_disable(priv->usb_30_clk);
+	}
+	mutex_unlock(&priv->mutex);
+	phy->inited = false;
+	return 0;
+}
+
+static struct phy_ops brcm_usb_phy_ops = {
+	.init		= brcm_usb_phy_init,
+	.exit		= brcm_usb_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *brcm_usb_phy_xlate(struct device *dev,
+				      struct of_phandle_args *args)
+{
+	struct brcm_usb_phy_data *data = dev_get_drvdata(dev);
+
+	/*
+	 * values 0 and 1 are for backward compatibility with
+	 * device tree nodes from older bootloaders.
+	 */
+	switch (args->args[0]) {
+	case 0:
+	case PHY_TYPE_USB2:
+		if (data->phys[BRCM_USB_PHY_2_0].phy)
+			return data->phys[BRCM_USB_PHY_2_0].phy;
+		dev_warn(dev, "Error, 2.0 Phy not found\n");
+		break;
+	case 1:
+	case PHY_TYPE_USB3:
+		if (data->phys[BRCM_USB_PHY_3_0].phy)
+			return data->phys[BRCM_USB_PHY_3_0].phy;
+		dev_warn(dev, "Error, 3.0 Phy not found\n");
+		break;
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static int name_to_value(struct value_to_name_map *table, int count,
+			 const char *name, int *value)
+{
+	int x;
+
+	*value = 0;
+	for (x = 0; x < count; x++) {
+		if (sysfs_streq(name, table[x].name)) {
+			*value = x;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static const char *value_to_name(struct value_to_name_map *table, int count,
+				 int value)
+{
+	if (value >= count)
+		return "unknown";
+	return table[value].name;
+}
+
+static ssize_t dr_mode_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n",
+		value_to_name(&brcm_dr_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dr_mode_to_name),
+			      priv->ini.mode));
+}
+static DEVICE_ATTR_RO(dr_mode);
+
+static ssize_t dual_select_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+	int value;
+	int res;
+
+	mutex_lock(&sysfs_lock);
+	res = name_to_value(&brcm_dual_mode_to_name[0],
+			    ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
+	if (!res) {
+		brcm_usb_init_set_dual_select(&priv->ini, value);
+		res = len;
+	}
+	mutex_unlock(&sysfs_lock);
+	return res;
+}
+
+static ssize_t dual_select_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+	int value;
+
+	mutex_lock(&sysfs_lock);
+	value = brcm_usb_init_get_dual_select(&priv->ini);
+	mutex_unlock(&sysfs_lock);
+	return sprintf(buf, "%s\n",
+		value_to_name(&brcm_dual_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dual_mode_to_name),
+			      value));
+}
+static DEVICE_ATTR_RW(dual_select);
+
+static struct attribute *brcm_usb_phy_attrs[] = {
+	&dev_attr_dr_mode.attr,
+	&dev_attr_dual_select.attr,
+	NULL
+};
+
+static const struct attribute_group brcm_usb_phy_group = {
+	.attrs = brcm_usb_phy_attrs,
+};
+
+static int brcm_usb_phy_dvr_init(struct device *dev,
+				 struct brcm_usb_phy_data *priv,
+				 struct device_node *dn)
+{
+	struct phy *gphy;
+	int err;
+
+	priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
+	if (IS_ERR(priv->usb_20_clk)) {
+		dev_info(dev, "Clock not found in Device Tree\n");
+		priv->usb_20_clk = NULL;
+	}
+	err = clk_prepare_enable(priv->usb_20_clk);
+	if (err)
+		return err;
+
+	if (priv->has_eohci) {
+		gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
+		if (IS_ERR(gphy)) {
+			dev_err(dev, "failed to create EHCI/OHCI PHY\n");
+			return PTR_ERR(gphy);
+		}
+		priv->phys[BRCM_USB_PHY_2_0].phy = gphy;
+		priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0;
+		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]);
+	}
+
+	if (priv->has_xhci) {
+		gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
+		if (IS_ERR(gphy)) {
+			dev_err(dev, "failed to create XHCI PHY\n");
+			return PTR_ERR(gphy);
+		}
+		priv->phys[BRCM_USB_PHY_3_0].phy = gphy;
+		priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
+		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
+
+		priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
+		if (IS_ERR(priv->usb_30_clk)) {
+			dev_info(dev,
+				 "USB3.0 clock not found in Device Tree\n");
+			priv->usb_30_clk = NULL;
+		}
+		err = clk_prepare_enable(priv->usb_30_clk);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int brcm_usb_phy_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct brcm_usb_phy_data *priv;
+	struct phy_provider *phy_provider;
+	struct device_node *dn = pdev->dev.of_node;
+	int err;
+	const char *mode;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	priv->ini.family_id = brcmstb_get_family_id();
+	priv->ini.product_id = brcmstb_get_product_id();
+	brcm_usb_set_family_map(&priv->ini);
+	dev_dbg(dev, "Best mapping table is for %s\n",
+		priv->ini.family_name);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "can't get USB_CTRL base address\n");
+		return -EINVAL;
+	}
+	priv->ini.ctrl_regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->ini.ctrl_regs)) {
+		dev_err(dev, "can't map CTRL register space\n");
+		return -EINVAL;
+	}
+
+	/* The XHCI EC registers are optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		priv->ini.xhci_ec_regs =
+			devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->ini.xhci_ec_regs)) {
+			dev_err(dev, "can't map XHCI EC register space\n");
+			return -EINVAL;
+		}
+	}
+
+	of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
+	of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
+
+	priv->ini.mode = USB_CTLR_MODE_HOST;
+	err = of_property_read_string(dn, "dr_mode", &mode);
+	if (err == 0) {
+		name_to_value(&brcm_dr_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dr_mode_to_name),
+			mode, &priv->ini.mode);
+	}
+	if (of_property_read_bool(dn, "brcm,has_xhci"))
+		priv->has_xhci = true;
+	if (of_property_read_bool(dn, "brcm,has_eohci"))
+		priv->has_eohci = true;
+
+	err = brcm_usb_phy_dvr_init(dev, priv, dn);
+	if (err)
+		return err;
+
+	mutex_init(&priv->mutex);
+
+	/* make sure invert settings are correct */
+	brcm_usb_init_ipp(&priv->ini);
+
+	/*
+	 * Create sysfs entries for mode.
+	 * Remove "dual_select" attribute if not in dual mode
+	 */
+	if (priv->ini.mode != USB_CTLR_MODE_DRD)
+		brcm_usb_phy_attrs[1] = NULL;
+	err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
+	if (err)
+		dev_warn(dev, "Error creating sysfs attributes\n");
+
+	/* start with everything off */
+	if (priv->has_xhci)
+		brcm_usb_uninit_xhci(&priv->ini);
+	if (priv->has_eohci)
+		brcm_usb_uninit_eohci(&priv->ini);
+	brcm_usb_uninit_common(&priv->ini);
+	clk_disable(priv->usb_20_clk);
+	clk_disable(priv->usb_30_clk);
+
+	phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcm_usb_phy_suspend(struct device *dev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	if (priv->init_count) {
+		clk_disable(priv->usb_20_clk);
+		clk_disable(priv->usb_30_clk);
+	}
+	return 0;
+}
+
+static int brcm_usb_phy_resume(struct device *dev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	clk_enable(priv->usb_20_clk);
+	clk_enable(priv->usb_30_clk);
+	brcm_usb_init_ipp(&priv->ini);
+
+	/*
+	 * Initialize anything that was previously initialized.
+	 * Uninitialize anything that wasn't previously initialized.
+	 */
+	if (priv->init_count) {
+		brcm_usb_init_common(&priv->ini);
+		if (priv->phys[BRCM_USB_PHY_2_0].inited) {
+			brcm_usb_init_eohci(&priv->ini);
+		} else if (priv->has_eohci) {
+			brcm_usb_uninit_eohci(&priv->ini);
+			clk_disable(priv->usb_20_clk);
+		}
+		if (priv->phys[BRCM_USB_PHY_3_0].inited) {
+			brcm_usb_init_xhci(&priv->ini);
+		} else if (priv->has_xhci) {
+			brcm_usb_uninit_xhci(&priv->ini);
+			clk_disable(priv->usb_30_clk);
+		}
+	} else {
+		if (priv->has_xhci)
+			brcm_usb_uninit_xhci(&priv->ini);
+		if (priv->has_eohci)
+			brcm_usb_uninit_eohci(&priv->ini);
+		brcm_usb_uninit_common(&priv->ini);
+		clk_disable(priv->usb_20_clk);
+		clk_disable(priv->usb_30_clk);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops brcm_usb_phy_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
+};
+
+static const struct of_device_id brcm_usb_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-usb-phy" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
+
+static struct platform_driver brcm_usb_driver = {
+	.probe		= brcm_usb_phy_probe,
+	.driver		= {
+		.name	= "brcmstb-usb-phy",
+		.owner	= THIS_MODULE,
+		.pm = &brcm_usb_phy_pm_ops,
+		.of_match_table = brcm_usb_dt_ids,
+	},
+};
+
+module_platform_driver(brcm_usb_driver);
+
+MODULE_ALIAS("platform:brcmstb-usb-phy");
+MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>");
+MODULE_DESCRIPTION("BRCM USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 89c887ea5557..a0d522154cdf 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -154,7 +154,6 @@ struct mvebu_comphy_priv {
 	void __iomem *base;
 	struct regmap *regmap;
 	struct device *dev;
-	int modes[MVEBU_COMPHY_LANES];
 };
 
 struct mvebu_comphy_lane {
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 721a2a1c97ef..402385f2562a 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -96,9 +96,11 @@
 
 #define U3P_U2PHYDTM1		0x06C
 #define P2C_RG_UART_EN			BIT(16)
+#define P2C_FORCE_IDDIG		BIT(9)
 #define P2C_RG_VBUSVALID		BIT(5)
 #define P2C_RG_SESSEND			BIT(4)
 #define P2C_RG_AVALID			BIT(2)
+#define P2C_RG_IDDIG			BIT(1)
 
 #define U3P_U3_CHIP_GPIO_CTLD		0x0c
 #define P3C_REG_IP_SW_RST		BIT(31)
@@ -585,6 +587,31 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
 	}
 }
 
+static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
+				     struct mtk_phy_instance *instance,
+				     enum phy_mode mode)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	u32 tmp;
+
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
+	switch (mode) {
+	case PHY_MODE_USB_DEVICE:
+		tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
+		break;
+	case PHY_MODE_USB_HOST:
+		tmp |= P2C_FORCE_IDDIG;
+		tmp &= ~P2C_RG_IDDIG;
+		break;
+	case PHY_MODE_USB_OTG:
+		tmp &= ~(P2C_FORCE_IDDIG | P2C_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM1);
+}
+
 static void pcie_phy_instance_init(struct mtk_tphy *tphy,
 	struct mtk_phy_instance *instance)
 {
@@ -881,6 +908,17 @@ static int mtk_phy_exit(struct phy *phy)
 	return 0;
 }
 
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+	if (instance->type == PHY_TYPE_USB2)
+		u2_phy_instance_set_mode(tphy, instance, mode);
+
+	return 0;
+}
+
 static struct phy *mtk_phy_xlate(struct device *dev,
 					struct of_phandle_args *args)
 {
@@ -931,6 +969,7 @@ static const struct phy_ops mtk_tphy_ops = {
 	.exit		= mtk_phy_exit,
 	.power_on	= mtk_phy_power_on,
 	.power_off	= mtk_phy_power_off,
+	.set_mode	= mtk_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index a268f4d6f3e9..b4964b067aec 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -372,6 +372,21 @@ int phy_reset(struct phy *phy)
 }
 EXPORT_SYMBOL_GPL(phy_reset);
 
+int phy_calibrate(struct phy *phy)
+{
+	int ret;
+
+	if (!phy || !phy->ops->calibrate)
+		return 0;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->calibrate(phy);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_calibrate);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 13b02b7de30b..822c83b8efcd 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -114,14 +114,16 @@ struct ufs_qcom_phy {
 	struct ufs_qcom_phy_calibration *cached_regs;
 	int cached_regs_table_size;
 	bool is_powered_on;
+	bool is_started;
 	struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+
+	enum phy_mode mode;
 };
 
 /**
  * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
  * specific implementation per phy. Each UFS phy, should implement
  * those functions according to its spec and requirements
- * @calibrate_phy: pointer to a function that calibrate the phy
  * @start_serdes: pointer to a function that starts the serdes
  * @is_physical_coding_sublayer_ready: pointer to a function that
  * checks pcs readiness. returns 0 for success and non-zero for error.
@@ -130,7 +132,6 @@ struct ufs_qcom_phy {
  * and writes to QSERDES_RX_SIGDET_CNTRL attribute
  */
 struct ufs_qcom_phy_specific_ops {
-	int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
 	void (*start_serdes)(struct ufs_qcom_phy *phy);
 	int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
 	void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index 12a1b498dc4b..ba1895b76a5d 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -44,7 +44,19 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 
 static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
 {
-	return 0;
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+	bool is_rate_B = false;
+	int ret;
+
+	if (phy_common->mode == PHY_MODE_UFS_HS_B)
+		is_rate_B = true;
+
+	ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
+	if (!ret)
+		/* phy calibrated, but yet to be started */
+		phy_common->is_started = false;
+
+	return ret;
 }
 
 static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
@@ -53,6 +65,19 @@ static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
 }
 
 static
+int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		phy_common->mode = mode;
+
+	return 0;
+}
+
+static
 void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
 {
 	writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
@@ -102,11 +127,11 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
 	.exit		= ufs_qcom_phy_qmp_14nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
+	.set_mode	= ufs_qcom_phy_qmp_14nm_set_mode,
 	.owner		= THIS_MODULE,
 };
 
 static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
-	.calibrate_phy		= ufs_qcom_phy_qmp_14nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_14nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
index 4f68acb58b73..49f435c71147 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
@@ -63,7 +63,19 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 
 static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
 {
-	return 0;
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+	bool is_rate_B = false;
+	int ret;
+
+	if (phy_common->mode == PHY_MODE_UFS_HS_B)
+		is_rate_B = true;
+
+	ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
+	if (!ret)
+		/* phy calibrated, but yet to be started */
+		phy_common->is_started = false;
+
+	return ret;
 }
 
 static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
@@ -72,6 +84,19 @@ static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
 }
 
 static
+int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		phy_common->mode = mode;
+
+	return 0;
+}
+
+static
 void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
 {
 	bool hibern8_exit_after_pwr_collapse = phy->quirks &
@@ -160,11 +185,11 @@ static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
 	.exit		= ufs_qcom_phy_qmp_20nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
+	.set_mode	= ufs_qcom_phy_qmp_20nm_set_mode,
 	.owner		= THIS_MODULE,
 };
 
 static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
-	.calibrate_phy		= ufs_qcom_phy_qmp_20nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_20nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
index 43865ef340e2..c5ff4525edef 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
@@ -518,9 +518,8 @@ void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
 	}
 }
 
-int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy)
 {
-	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
 	int ret = 0;
 
 	if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
@@ -533,7 +532,6 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
 
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 {
@@ -564,31 +562,8 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 }
 EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
 
-int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
-{
-	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-	int ret = 0;
-
-	if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
-		dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n",
-			__func__);
-		ret = -ENOTSUPP;
-	} else {
-		ret = ufs_qcom_phy->phy_spec_ops->
-				calibrate_phy(ufs_qcom_phy, is_rate_B);
-		if (ret)
-			dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
-				__func__, ret);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
-
-int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy)
 {
-	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-
 	if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
 		dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
 			__func__);
@@ -598,7 +573,6 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 	return ufs_qcom_phy->phy_spec_ops->
 			is_physical_coding_sublayer_ready(ufs_qcom_phy);
 }
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
 
 int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {
@@ -609,6 +583,18 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
 	if (phy_common->is_powered_on)
 		return 0;
 
+	if (!phy_common->is_started) {
+		err = ufs_qcom_phy_start_serdes(phy_common);
+		if (err)
+			return err;
+
+		err = ufs_qcom_phy_is_pcs_ready(phy_common);
+		if (err)
+			return err;
+
+		phy_common->is_started = true;
+	}
+
 	err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
 	if (err) {
 		dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 54c34298a000..479ae94b976e 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -1,7 +1,7 @@
 /*
  * Renesas R-Car Gen3 for USB2.0 PHY driver
  *
- * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
  *
  * This is based on the phy-rcar-gen2 driver:
  * Copyright (C) 2014 Renesas Solutions Corp.
@@ -18,10 +18,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
 /******* USB2.0 Host registers (original offset is +0x200) *******/
@@ -79,6 +81,8 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
+#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS	1
+
 struct rcar_gen3_chan {
 	void __iomem *base;
 	struct extcon_dev *extcon;
@@ -86,7 +90,7 @@ struct rcar_gen3_chan {
 	struct regulator *vbus;
 	struct work_struct work;
 	bool extcon_host;
-	bool has_otg;
+	bool has_otg_pins;
 };
 
 static void rcar_gen3_phy_usb2_work(struct work_struct *work)
@@ -218,33 +222,40 @@ static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
 	return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
 }
 
+static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
+{
+	if (rcar_gen3_is_host(ch))
+		return PHY_MODE_USB_HOST;
+
+	return PHY_MODE_USB_DEVICE;
+}
+
 static ssize_t role_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
 {
 	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
-	bool is_b_device, is_host, new_mode_is_host;
+	bool is_b_device;
+	enum phy_mode cur_mode, new_mode;
 
-	if (!ch->has_otg || !ch->phy->init_count)
+	if (!ch->has_otg_pins || !ch->phy->init_count)
 		return -EIO;
 
-	/*
-	 * is_b_device: true is B-Device. false is A-Device.
-	 * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
-	 */
-	is_b_device = rcar_gen3_check_id(ch);
-	is_host = rcar_gen3_is_host(ch);
 	if (!strncmp(buf, "host", strlen("host")))
-		new_mode_is_host = true;
+		new_mode = PHY_MODE_USB_HOST;
 	else if (!strncmp(buf, "peripheral", strlen("peripheral")))
-		new_mode_is_host = false;
+		new_mode = PHY_MODE_USB_DEVICE;
 	else
 		return -EINVAL;
 
+	/* is_b_device: true is B-Device. false is A-Device. */
+	is_b_device = rcar_gen3_check_id(ch);
+	cur_mode = rcar_gen3_get_phy_mode(ch);
+
 	/* If current and new mode is the same, this returns the error */
-	if (is_host == new_mode_is_host)
+	if (cur_mode == new_mode)
 		return -EINVAL;
 
-	if (new_mode_is_host) {		/* And is_host must be false */
+	if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */
 		if (!is_b_device)	/* A-Peripheral */
 			rcar_gen3_init_from_a_peri_to_a_host(ch);
 		else			/* B-Peripheral */
@@ -264,7 +275,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
 {
 	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
 
-	if (!ch->has_otg || !ch->phy->init_count)
+	if (!ch->has_otg_pins || !ch->phy->init_count)
 		return -EIO;
 
 	return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
@@ -303,7 +314,7 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
 	writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
 
 	/* Initialize otg part */
-	if (channel->has_otg)
+	if (channel->has_otg_pins)
 		rcar_gen3_init_otg(channel);
 
 	return 0;
@@ -377,9 +388,17 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 }
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
-	{ .compatible = "renesas,usb2-phy-r8a7795" },
-	{ .compatible = "renesas,usb2-phy-r8a7796" },
-	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
+	{
+		.compatible = "renesas,usb2-phy-r8a7795",
+		.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a7796",
+		.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
+	},
+	{
+		.compatible = "renesas,rcar-gen3-usb2-phy",
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@@ -415,14 +434,17 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	/* call request_irq for OTG */
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0) {
-		int ret;
-
 		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
 				       IRQF_SHARED, dev_name(dev), channel);
 		if (irq < 0)
 			dev_err(dev, "No irq handler (%d)\n", irq);
-		channel->has_otg = true;
+	}
+
+	if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
+		int ret;
+
+		channel->has_otg_pins = (uintptr_t)of_device_get_match_data(dev);
 		channel->extcon = devm_extcon_dev_allocate(dev,
 							rcar_gen3_phy_cable);
 		if (IS_ERR(channel->extcon))
@@ -464,7 +486,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to register PHY provider\n");
 		ret = PTR_ERR(provider);
 		goto error;
-	} else if (channel->has_otg) {
+	} else if (channel->has_otg_pins) {
 		int ret;
 
 		ret = device_create_file(dev, &dev_attr_role);
@@ -484,7 +506,7 @@ static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
 {
 	struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
 
-	if (channel->has_otg)
+	if (channel->has_otg_pins)
 		device_remove_file(&pdev->dev, &dev_attr_role);
 
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index a958c9bced01..ee85fa0ca4b0 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -102,9 +102,40 @@
 #define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
 #define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
 #define CMN_RXCAL_OVRD			(0xd1 << 2)
+
 #define CMN_TXPUCAL_CTRL		(0xe0 << 2)
 #define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_CTRL		(0xf0 << 2)
 #define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+
+/* For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL */
+#define CMN_TXPXCAL_START		BIT(15)
+#define CMN_TXPXCAL_DONE		BIT(14)
+#define CMN_TXPXCAL_NO_RESPONSE		BIT(13)
+#define CMN_TXPXCAL_CURRENT_RESPONSE	BIT(12)
+
+#define CMN_TXPU_ADJ_CTRL		(0x108 << 2)
+#define CMN_TXPD_ADJ_CTRL		(0x10c << 2)
+
+/*
+ * For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL,
+ *     CMN_TXPU_ADJ_CTRL, CMN_TXPDCAL_CTRL
+ *
+ * NOTE: some of these registers are documented to be 2's complement
+ * signed numbers, but then documented to be always positive.  Weird.
+ * In such a case, using CMN_CALIB_CODE_POS() avoids the unnecessary
+ * sign extension.
+ */
+#define CMN_CALIB_CODE_WIDTH	7
+#define CMN_CALIB_CODE_OFFSET	0
+#define CMN_CALIB_CODE_MASK	GENMASK(CMN_CALIB_CODE_WIDTH, 0)
+#define CMN_CALIB_CODE(x)	\
+	sign_extend32((x) >> CMN_CALIB_CODE_OFFSET, CMN_CALIB_CODE_WIDTH)
+
+#define CMN_CALIB_CODE_POS_MASK	GENMASK(CMN_CALIB_CODE_WIDTH - 1, 0)
+#define CMN_CALIB_CODE_POS(x)	\
+	(((x) >> CMN_CALIB_CODE_OFFSET) & CMN_CALIB_CODE_POS_MASK)
+
 #define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
 #define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
 #define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
@@ -138,6 +169,15 @@
 #define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | ((n) << 9)) << 2)
 #define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | ((n) << 9)) << 2)
 #define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_000(n)	((0x4058 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_001(n)	((0x4059 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_010(n)	((0x405a | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_011(n)	((0x405b | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_100(n)	((0x405c | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_101(n)	((0x405d | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_110(n)	((0x405e | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_111(n)	((0x405f | ((n) << 9)) << 2)
+
 #define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
 #define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
 #define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
@@ -150,10 +190,63 @@
 #define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
 #define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
 #define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+
+/* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */
+#define AUX_CH_LANE			8
+
 #define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+
+#define TXDA_DP_AUX_EN			BIT(15)
+#define AUXDA_SE_EN			BIT(14)
+#define TXDA_CAL_LATCH_EN		BIT(13)
+#define AUXDA_POLARITY			BIT(12)
+#define TXDA_DRV_POWER_ISOLATION_EN	BIT(11)
+#define TXDA_DRV_POWER_EN_PH_2_N	BIT(10)
+#define TXDA_DRV_POWER_EN_PH_1_N	BIT(9)
+#define TXDA_BGREF_EN			BIT(8)
+#define TXDA_DRV_LDO_EN			BIT(7)
+#define TXDA_DECAP_EN_DEL		BIT(6)
+#define TXDA_DECAP_EN			BIT(5)
+#define TXDA_UPHY_SUPPLY_EN_DEL		BIT(4)
+#define TXDA_UPHY_SUPPLY_EN		BIT(3)
+#define TXDA_LOW_LEAKAGE_EN		BIT(2)
+#define TXDA_DRV_IDLE_LOWI_EN		BIT(1)
+#define TXDA_DRV_CMN_MODE_EN		BIT(0)
+
 #define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+
+#define AUXDA_DEBOUNCING_CLK		BIT(15)
+#define TXDA_LPBK_RECOVERED_CLK_EN	BIT(14)
+#define TXDA_LPBK_ISI_GEN_EN		BIT(13)
+#define TXDA_LPBK_SERIAL_EN		BIT(12)
+#define TXDA_LPBK_LINE_EN		BIT(11)
+#define TXDA_DRV_LDO_REDC_SINKIQ	BIT(10)
+#define XCVR_DECAP_EN_DEL		BIT(9)
+#define XCVR_DECAP_EN			BIT(8)
+#define TXDA_MPHY_ENABLE_HS_NT		BIT(7)
+#define TXDA_MPHY_SA_MODE		BIT(6)
+#define TXDA_DRV_LDO_RBYR_FB_EN		BIT(5)
+#define TXDA_DRV_RST_PULL_DOWN		BIT(4)
+#define TXDA_DRV_LDO_BG_FB_EN		BIT(3)
+#define TXDA_DRV_LDO_BG_REF_EN		BIT(2)
+#define TXDA_DRV_PREDRV_EN_DEL		BIT(1)
+#define TXDA_DRV_PREDRV_EN		BIT(0)
+
 #define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+
+#define TX_HIGH_Z			BIT(6)
+#define TX_VMARGIN_OFFSET		3
+#define TX_VMARGIN_MASK			0x7
+#define LOW_POWER_SWING_EN		BIT(2)
+#define TX_FCM_DRV_MAIN_EN		BIT(1)
+#define TX_FCM_FULL_MARGIN		BIT(0)
+
 #define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+
+#define TX_HIGH_Z_TM_EN			BIT(15)
+#define TX_RESCAL_CODE_OFFSET		0
+#define TX_RESCAL_CODE_MASK		0x3f
+
 #define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
 #define TX_ANA_CTRL_REG_3		(0x5026 << 2)
 #define TX_ANA_CTRL_REG_4		(0x5027 << 2)
@@ -456,54 +549,72 @@ static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy)
 	 */
 	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
 	if (!tcphy->flip)
-		tx_ana_ctrl_reg_1 |= BIT(12);
+		tx_ana_ctrl_reg_1 |= AUXDA_POLARITY;
 	else
-		tx_ana_ctrl_reg_1 &= ~BIT(12);
+		tx_ana_ctrl_reg_1 &= ~AUXDA_POLARITY;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 }
 
 static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 {
+	u16 val;
 	u16 tx_ana_ctrl_reg_1;
-	u16 rdata, rdata2, val;
-
-	/* disable txda_cal_latch_en for rewrite the calibration values */
-	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
-	tx_ana_ctrl_reg_1 &= ~BIT(13);
-	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	u16 tx_ana_ctrl_reg_2;
+	s32 pu_calib_code, pd_calib_code;
+	s32 pu_adj, pd_adj;
+	u16 calib;
 
 	/*
-	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
-	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
-	 * works.
+	 * Calculate calibration code as per docs: use an average of the
+	 * pull down and pull up.  Then add in adjustments.
 	 */
-	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
-	rdata = rdata & 0xffc0;
+	val = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	pu_calib_code = CMN_CALIB_CODE_POS(val);
+	val = readl(tcphy->base + CMN_TXPDCAL_CTRL);
+	pd_calib_code = CMN_CALIB_CODE_POS(val);
+	val = readl(tcphy->base + CMN_TXPU_ADJ_CTRL);
+	pu_adj = CMN_CALIB_CODE(val);
+	val = readl(tcphy->base + CMN_TXPD_ADJ_CTRL);
+	pd_adj = CMN_CALIB_CODE(val);
+	calib = (pu_calib_code + pd_calib_code) / 2 + pu_adj + pd_adj;
 
-	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
-	rdata2 = rdata2 & 0x3f;
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 &= ~TXDA_CAL_LATCH_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
-	val = rdata | rdata2;
+	/* write the calibration, then delay 10 ms as sample in docs */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val &= ~(TX_RESCAL_CODE_MASK << TX_RESCAL_CODE_OFFSET);
+	val |= calib << TX_RESCAL_CODE_OFFSET;
 	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
-	usleep_range(1000, 1050);
+	usleep_range(10000, 10050);
 
 	/*
 	 * Enable signal for latch that sample and holds calibration values.
 	 * Activate this signal for 1 clock cycle to sample new calibration
 	 * values.
 	 */
-	tx_ana_ctrl_reg_1 |= BIT(13);
+	tx_ana_ctrl_reg_1 |= TXDA_CAL_LATCH_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 	usleep_range(150, 200);
 
 	/* set TX Voltage Level and TX Deemphasis to 0 */
 	writel(0, tcphy->base + PHY_DP_TX_CTL);
+
 	/* re-enable decap */
-	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
-	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
-	tx_ana_ctrl_reg_1 |= BIT(3);
+	tx_ana_ctrl_reg_2 = XCVR_DECAP_EN;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+	udelay(1);
+	tx_ana_ctrl_reg_2 |= XCVR_DECAP_EN_DEL;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+
+	tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
-	tx_ana_ctrl_reg_1 |= BIT(4);
+	udelay(1);
+	tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN_DEL;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
@@ -515,44 +626,66 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
 
 	/* re-enables Bandgap reference for LDO */
-	tx_ana_ctrl_reg_1 |= BIT(7);
+	tx_ana_ctrl_reg_1 |= TXDA_DRV_LDO_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
-	tx_ana_ctrl_reg_1 |= BIT(8);
+	udelay(5);
+	tx_ana_ctrl_reg_1 |= TXDA_BGREF_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	/*
 	 * re-enables the transmitter pre-driver, driver data selection MUX,
 	 * and receiver detect circuits.
 	 */
-	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
-	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+	tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+	udelay(1);
+	tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN_DEL;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
 
 	/*
-	 * Do some magic undocumented stuff, some of which appears to
-	 * undo the "re-enables Bandgap reference for LDO" above.
+	 * Do all the undocumented magic:
+	 * - Turn on TXDA_DP_AUX_EN, whatever that is, even though sample
+	 *   never shows this going on.
+	 * - Turn on TXDA_DECAP_EN (and TXDA_DECAP_EN_DEL) even though
+	 *   docs say for aux it's always 0.
+	 * - Turn off the LDO and BGREF, which we just spent time turning
+	 *   on above (???).
+	 *
+	 * Without this magic, things seem worse.
 	 */
-	tx_ana_ctrl_reg_1 |=  BIT(15);
-	tx_ana_ctrl_reg_1 &= ~BIT(8);
-	tx_ana_ctrl_reg_1 &= ~BIT(7);
-	tx_ana_ctrl_reg_1 |=  BIT(6);
-	tx_ana_ctrl_reg_1 |=  BIT(5);
+	tx_ana_ctrl_reg_1 |= TXDA_DP_AUX_EN;
+	tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN;
+	tx_ana_ctrl_reg_1 &= ~TXDA_DRV_LDO_EN;
+	tx_ana_ctrl_reg_1 &= ~TXDA_BGREF_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	udelay(1);
+	tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN_DEL;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
-
-	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
-	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
-	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
 
 	/*
-	 * Controls low_power_swing_en, don't set the voltage swing of the
-	 * driver to 400mv. The values below are peak to peak (differential)
-	 * values.
+	 * Undo the work we did to set the LDO voltage.
+	 * This doesn't seem to help nor hurt, but it kinda goes with the
+	 * undocumented magic above.
 	 */
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* Don't set voltage swing to 400 mV peak to peak (differential) */
 	writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL);
+
+	/* Init TXDA_CYA_AUXDA_CYA for unknown magic reasons */
 	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
 
-	/* Controls tx_high_z_tm_en */
+	/*
+	 * More undocumented magic, presumably the goal of which is to
+	 * make the "auxda_source_aux_oen" be ignored and instead to decide
+	 * about "high impedance state" based on what software puts in the
+	 * register TXDA_COEFF_CALC_CTRL (see TX_HIGH_Z).  Since we only
+	 * program that register once and we don't set the bit TX_HIGH_Z,
+	 * presumably the goal here is that we should never put the analog
+	 * driver in high impedance state.
+	 */
 	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
-	val |= BIT(15);
+	val |= TX_HIGH_Z_TM_EN;
 	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
 }
 
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 0e564f32749f..68ce4a082b9b 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -68,6 +68,40 @@
 #define PCIE_PCS_MASK			0xFF0000
 #define PCIE_PCS_DELAY_COUNT_SHIFT	0x10
 
+#define PCIEPHYRX_ANA_PROGRAMMABILITY	0x0000000C
+#define INTERFACE_MASK			GENMASK(31, 27)
+#define INTERFACE_SHIFT			27
+#define LOSD_MASK			GENMASK(17, 14)
+#define LOSD_SHIFT			14
+#define MEM_PLLDIV			GENMASK(6, 5)
+
+#define PCIEPHYRX_TRIM			0x0000001C
+#define MEM_DLL_TRIM_SEL		GENMASK(31, 30)
+#define MEM_DLL_TRIM_SHIFT		30
+
+#define PCIEPHYRX_DLL			0x00000024
+#define MEM_DLL_PHINT_RATE		GENMASK(31, 30)
+
+#define PCIEPHYRX_DIGITAL_MODES		0x00000028
+#define MEM_CDR_FASTLOCK		BIT(23)
+#define MEM_CDR_LBW			GENMASK(22, 21)
+#define MEM_CDR_STEPCNT			GENMASK(20, 19)
+#define MEM_CDR_STL_MASK		GENMASK(18, 16)
+#define MEM_CDR_STL_SHIFT		16
+#define MEM_CDR_THR_MASK		GENMASK(15, 13)
+#define MEM_CDR_THR_SHIFT		13
+#define MEM_CDR_THR_MODE		BIT(12)
+#define MEM_CDR_CDR_2NDO_SDM_MODE	BIT(11)
+#define MEM_OVRD_HS_RATE		BIT(26)
+
+#define PCIEPHYRX_EQUALIZER		0x00000038
+#define MEM_EQLEV			GENMASK(31, 16)
+#define MEM_EQFTC			GENMASK(15, 11)
+#define MEM_EQCTL			GENMASK(10, 7)
+#define MEM_EQCTL_SHIFT			7
+#define MEM_OVRD_EQLEV			BIT(2)
+#define MEM_OVRD_EQFTC			BIT(1)
+
 /*
  * This is an Empirical value that works, need to confirm the actual
  * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -91,6 +125,8 @@ struct pipe3_dpll_map {
 
 struct ti_pipe3 {
 	void __iomem		*pll_ctrl_base;
+	void __iomem		*phy_rx;
+	void __iomem		*phy_tx;
 	struct device		*dev;
 	struct device		*control_dev;
 	struct clk		*wkupclk;
@@ -261,6 +297,37 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
 	return ti_pipe3_dpll_wait_lock(phy);
 }
 
+static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
+{
+	u32 val;
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY);
+	val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
+	val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES);
+	val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK |
+		 MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE);
+	val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT |
+		0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE);
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM);
+	val &= ~MEM_DLL_TRIM_SEL;
+	val |= 0x2 << MEM_DLL_TRIM_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL);
+	val |= MEM_DLL_PHINT_RATE;
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER);
+	val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
+	val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val);
+}
+
 static int ti_pipe3_init(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
@@ -282,7 +349,12 @@ static int ti_pipe3_init(struct phy *x)
 		val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
 		ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
 					 PCIE_PCS_MASK, val);
-		return ret;
+		if (ret)
+			return ret;
+
+		ti_pipe3_calibrate(phy);
+
+		return 0;
 	}
 
 	/* Bring it out of IDLE if it is IDLE */
@@ -513,6 +585,29 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 	return 0;
 }
 
+static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
+{
+	struct resource *res;
+	struct device *dev = phy->dev;
+	struct device_node *node = dev->of_node;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
+		return 0;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "phy_rx");
+	phy->phy_rx = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->phy_rx))
+		return PTR_ERR(phy->phy_rx);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "phy_tx");
+	phy->phy_tx = devm_ioremap_resource(dev, res);
+
+	return PTR_ERR_OR_ZERO(phy->phy_tx);
+}
+
 static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
 {
 	struct resource *res;
@@ -559,6 +654,10 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = ti_pipe3_get_tx_rx_base(phy);
+	if (ret)
+		return ret;
+
 	ret = ti_pipe3_get_sysctrl(phy);
 	if (ret)
 		return ret;