Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 5.2-rc1

  There is the usual set of:

   - USB gadget updates

   - PHY driver updates and additions

   - USB serial driver updates and fixes

   - typec updates and new chips supported

   - mtu3 driver updates

   - xhci driver updates

   - other tiny driver updates

  Nothing really interesting, just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues. The usb-gadget and usb-serial trees were merged a bit "late",
  but both of them had been in linux-next before they got merged here
  last Friday"

* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
  USB: serial: f81232: implement break control
  USB: serial: f81232: add high baud rate support
  USB: serial: f81232: clear overrun flag
  USB: serial: f81232: fix interrupt worker not stop
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  ...

5 files changed, 781 insertions, 8 deletions

diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 23fe1cda2f70..4c08c1ccdd04 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -36,3 +36,25 @@ config PHY_MESON_GXL_USB3
 	  Enable this to support the Meson USB3 PHY and OTG detection
 	  IP block found in Meson GXL and GXM SoCs.
 	  If unsure, say N.
+
+config PHY_MESON_G12A_USB2
+	tristate "Meson G12A USB2 PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB2 PHYs found in Meson
+	  G12A SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_G12A_USB3_PCIE
+	tristate "Meson G12A USB3+PCIE Combo PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB3 + PCIE Combo PHY found
+	  in Meson G12A SoCs.
+	  If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
index 4fd8848c194d..fdd008e1b19b 100644
--- a/drivers/phy/amlogic/Makefile
+++ b/drivers/phy/amlogic/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o
 obj-$(CONFIG_PHY_MESON_GXL_USB2)	+= phy-meson-gxl-usb2.o
+obj-$(CONFIG_PHY_MESON_G12A_USB2)	+= phy-meson-g12a-usb2.o
 obj-$(CONFIG_PHY_MESON_GXL_USB3)	+= phy-meson-gxl-usb3.o
+obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE)	+= phy-meson-g12a-usb3-pcie.o
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
new file mode 100644
index 000000000000..9065ffc85eb4
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson G12A USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PHY_CTRL_R0						0x0
+#define PHY_CTRL_R1						0x4
+#define PHY_CTRL_R2						0x8
+#define PHY_CTRL_R3						0xc
+	#define PHY_CTRL_R3_SQUELCH_REF				GENMASK(1, 0)
+	#define PHY_CTRL_R3_HSDIC_REF				GENMASK(3, 2)
+	#define PHY_CTRL_R3_DISC_THRESH				GENMASK(7, 4)
+
+#define PHY_CTRL_R4						0x10
+	#define PHY_CTRL_R4_CALIB_CODE_7_0			GENMASK(7, 0)
+	#define PHY_CTRL_R4_CALIB_CODE_15_8			GENMASK(15, 8)
+	#define PHY_CTRL_R4_CALIB_CODE_23_16			GENMASK(23, 16)
+	#define PHY_CTRL_R4_I_C2L_CAL_EN			BIT(24)
+	#define PHY_CTRL_R4_I_C2L_CAL_RESET_N			BIT(25)
+	#define PHY_CTRL_R4_I_C2L_CAL_DONE			BIT(26)
+	#define PHY_CTRL_R4_TEST_BYPASS_MODE_EN			BIT(27)
+	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0			GENMASK(29, 28)
+	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2			GENMASK(31, 30)
+
+#define PHY_CTRL_R5						0x14
+#define PHY_CTRL_R6						0x18
+#define PHY_CTRL_R7						0x1c
+#define PHY_CTRL_R8						0x20
+#define PHY_CTRL_R9						0x24
+#define PHY_CTRL_R10						0x28
+#define PHY_CTRL_R11						0x2c
+#define PHY_CTRL_R12						0x30
+#define PHY_CTRL_R13						0x34
+	#define PHY_CTRL_R13_CUSTOM_PATTERN_19			GENMASK(7, 0)
+	#define PHY_CTRL_R13_LOAD_STAT				BIT(14)
+	#define PHY_CTRL_R13_UPDATE_PMA_SIGNALS			BIT(15)
+	#define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET		GENMASK(20, 16)
+	#define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT		BIT(21)
+	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL		BIT(22)
+	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN		BIT(23)
+	#define PHY_CTRL_R13_I_C2L_HS_EN			BIT(24)
+	#define PHY_CTRL_R13_I_C2L_FS_EN			BIT(25)
+	#define PHY_CTRL_R13_I_C2L_LS_EN			BIT(26)
+	#define PHY_CTRL_R13_I_C2L_HS_OE			BIT(27)
+	#define PHY_CTRL_R13_I_C2L_FS_OE			BIT(28)
+	#define PHY_CTRL_R13_I_C2L_HS_RX_EN			BIT(29)
+	#define PHY_CTRL_R13_I_C2L_FSLS_RX_EN			BIT(30)
+
+#define PHY_CTRL_R14						0x38
+	#define PHY_CTRL_R14_I_RDP_EN				BIT(0)
+	#define PHY_CTRL_R14_I_RPU_SW1_EN			BIT(1)
+	#define PHY_CTRL_R14_I_RPU_SW2_EN			GENMASK(2, 3)
+	#define PHY_CTRL_R14_PG_RSTN				BIT(4)
+	#define PHY_CTRL_R14_I_C2L_DATA_16_8			BIT(5)
+	#define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO	BIT(6)
+	#define PHY_CTRL_R14_BYPASS_CTRL_7_0			GENMASK(15, 8)
+	#define PHY_CTRL_R14_BYPASS_CTRL_15_8			GENMASK(23, 16)
+
+#define PHY_CTRL_R15						0x3c
+#define PHY_CTRL_R16						0x40
+	#define PHY_CTRL_R16_MPLL_M				GENMASK(8, 0)
+	#define PHY_CTRL_R16_MPLL_N				GENMASK(14, 10)
+	#define PHY_CTRL_R16_MPLL_TDC_MODE			BIT(20)
+	#define PHY_CTRL_R16_MPLL_SDM_EN			BIT(21)
+	#define PHY_CTRL_R16_MPLL_LOAD				BIT(22)
+	#define PHY_CTRL_R16_MPLL_DCO_SDM_EN			BIT(23)
+	#define PHY_CTRL_R16_MPLL_LOCK_LONG			GENMASK(25, 24)
+	#define PHY_CTRL_R16_MPLL_LOCK_F			BIT(26)
+	#define PHY_CTRL_R16_MPLL_FAST_LOCK			BIT(27)
+	#define PHY_CTRL_R16_MPLL_EN				BIT(28)
+	#define PHY_CTRL_R16_MPLL_RESET				BIT(29)
+	#define PHY_CTRL_R16_MPLL_LOCK				BIT(30)
+	#define PHY_CTRL_R16_MPLL_LOCK_DIG			BIT(31)
+
+#define PHY_CTRL_R17						0x44
+	#define PHY_CTRL_R17_MPLL_FRAC_IN			GENMASK(13, 0)
+	#define PHY_CTRL_R17_MPLL_FIX_EN			BIT(16)
+	#define PHY_CTRL_R17_MPLL_LAMBDA1			GENMASK(19, 17)
+	#define PHY_CTRL_R17_MPLL_LAMBDA0			GENMASK(22, 20)
+	#define PHY_CTRL_R17_MPLL_FILTER_MODE			BIT(23)
+	#define PHY_CTRL_R17_MPLL_FILTER_PVT2			GENMASK(27, 24)
+	#define PHY_CTRL_R17_MPLL_FILTER_PVT1			GENMASK(31, 28)
+
+#define PHY_CTRL_R18						0x48
+	#define PHY_CTRL_R18_MPLL_LKW_SEL			GENMASK(1, 0)
+	#define PHY_CTRL_R18_MPLL_LK_W				GENMASK(5, 2)
+	#define PHY_CTRL_R18_MPLL_LK_S				GENMASK(11, 6)
+	#define PHY_CTRL_R18_MPLL_DCO_M_EN			BIT(12)
+	#define PHY_CTRL_R18_MPLL_DCO_CLK_SEL			BIT(13)
+	#define PHY_CTRL_R18_MPLL_PFD_GAIN			GENMASK(15, 14)
+	#define PHY_CTRL_R18_MPLL_ROU				GENMASK(18, 16)
+	#define PHY_CTRL_R18_MPLL_DATA_SEL			GENMASK(21, 19)
+	#define PHY_CTRL_R18_MPLL_BIAS_ADJ			GENMASK(23, 22)
+	#define PHY_CTRL_R18_MPLL_BB_MODE			GENMASK(25, 24)
+	#define PHY_CTRL_R18_MPLL_ALPHA				GENMASK(28, 26)
+	#define PHY_CTRL_R18_MPLL_ADJ_LDO			GENMASK(30, 29)
+	#define PHY_CTRL_R18_MPLL_ACG_RANGE			BIT(31)
+
+#define PHY_CTRL_R19						0x4c
+#define PHY_CTRL_R20						0x50
+	#define PHY_CTRL_R20_USB2_IDDET_EN			BIT(0)
+	#define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0		GENMASK(3, 1)
+	#define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN		BIT(4)
+	#define PHY_CTRL_R20_USB2_AMON_EN			BIT(5)
+	#define PHY_CTRL_R20_USB2_CAL_CODE_R5			BIT(6)
+	#define PHY_CTRL_R20_BYPASS_OTG_DET			BIT(7)
+	#define PHY_CTRL_R20_USB2_DMON_EN			BIT(8)
+	#define PHY_CTRL_R20_USB2_DMON_SEL_3_0			GENMASK(12, 9)
+	#define PHY_CTRL_R20_USB2_EDGE_DRV_EN			BIT(13)
+	#define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0		GENMASK(15, 14)
+	#define PHY_CTRL_R20_USB2_BGR_ADJ_4_0			GENMASK(20, 16)
+	#define PHY_CTRL_R20_USB2_BGR_START			BIT(21)
+	#define PHY_CTRL_R20_USB2_BGR_VREF_4_0			GENMASK(28, 24)
+	#define PHY_CTRL_R20_USB2_BGR_DBG_1_0			GENMASK(30, 29)
+	#define PHY_CTRL_R20_BYPASS_CAL_DONE_R5			BIT(31)
+
+#define PHY_CTRL_R21						0x54
+	#define PHY_CTRL_R21_USB2_BGR_FORCE			BIT(0)
+	#define PHY_CTRL_R21_USB2_CAL_ACK_EN			BIT(1)
+	#define PHY_CTRL_R21_USB2_OTG_ACA_EN			BIT(2)
+	#define PHY_CTRL_R21_USB2_TX_STRG_PD			BIT(3)
+	#define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0		GENMASK(5, 4)
+	#define PHY_CTRL_R21_BYPASS_UTMI_CNTR			GENMASK(15, 6)
+	#define PHY_CTRL_R21_BYPASS_UTMI_REG			GENMASK(25, 20)
+
+#define PHY_CTRL_R22						0x58
+#define PHY_CTRL_R23						0x5c
+
+#define RESET_COMPLETE_TIME					1000
+#define PLL_RESET_COMPLETE_TIME					100
+
+struct phy_meson_g12a_usb2_priv {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct clk		*clk;
+	struct reset_control	*reset;
+};
+
+static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_CTRL_R23,
+};
+
+static int phy_meson_g12a_usb2_init(struct phy *phy)
+{
+	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(RESET_COMPLETE_TIME);
+
+	/* usb2_otg_aca_en == 0 */
+	regmap_update_bits(priv->regmap, PHY_CTRL_R21,
+			   PHY_CTRL_R21_USB2_OTG_ACA_EN, 0);
+
+	/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
+	regmap_write(priv->regmap, PHY_CTRL_R16,
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
+		     PHY_CTRL_R16_MPLL_LOAD |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
+		     PHY_CTRL_R16_MPLL_FAST_LOCK |
+		     PHY_CTRL_R16_MPLL_EN |
+		     PHY_CTRL_R16_MPLL_RESET);
+
+	regmap_write(priv->regmap, PHY_CTRL_R17,
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
+
+	regmap_write(priv->regmap, PHY_CTRL_R18,
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
+		     PHY_CTRL_R18_MPLL_ACG_RANGE);
+
+	udelay(PLL_RESET_COMPLETE_TIME);
+
+	/* UnReset PLL */
+	regmap_write(priv->regmap, PHY_CTRL_R16,
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
+		     PHY_CTRL_R16_MPLL_LOAD |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
+		     PHY_CTRL_R16_MPLL_FAST_LOCK |
+		     PHY_CTRL_R16_MPLL_EN);
+
+	/* PHY Tuning */
+	regmap_write(priv->regmap, PHY_CTRL_R20,
+		     FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) |
+		     PHY_CTRL_R20_USB2_OTG_VBUSDET_EN |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) |
+		     PHY_CTRL_R20_USB2_EDGE_DRV_EN |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
+
+	regmap_write(priv->regmap, PHY_CTRL_R4,
+		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
+		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
+		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
+		     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
+		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+
+	/* Tuning Disconnect Threshold */
+	regmap_write(priv->regmap, PHY_CTRL_R3,
+		     FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) |
+		     FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
+		     FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
+
+	/* Analog Settings */
+	regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+	regmap_write(priv->regmap, PHY_CTRL_R13,
+		     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+		     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+
+	return 0;
+}
+
+static int phy_meson_g12a_usb2_exit(struct phy *phy)
+{
+	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+
+	return reset_control_reset(priv->reset);
+}
+
+/* set_mode is not needed, mode setting is handled via the UTMI bus */
+static const struct phy_ops phy_meson_g12a_usb2_ops = {
+	.init		= phy_meson_g12a_usb2_init,
+	.exit		= phy_meson_g12a_usb2_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct phy_meson_g12a_usb2_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_meson_g12a_usb2_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk = devm_clk_get(dev, "xtal");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->reset = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+
+		return ret;
+	}
+
+	phy_set_bus_width(phy, 8);
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
+	{ .compatible = "amlogic,g12a-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
+
+static struct platform_driver phy_meson_g12a_usb2_driver = {
+	.probe	= phy_meson_g12a_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-g12a-usb2",
+		.of_match_table	= phy_meson_g12a_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson_g12a_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Meson G12A USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
new file mode 100644
index 000000000000..6233a7979a93
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic G12A USB3 + PCIE Combo PHY driver
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define PHY_R0							0x00
+	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
+	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)
+
+#define PHY_R1							0x04
+	#define PHY_R1_PHY_TX1_TERM_OFFSET			GENMASK(4, 0)
+	#define PHY_R1_PHY_TX0_TERM_OFFSET			GENMASK(9, 5)
+	#define PHY_R1_PHY_RX1_EQ				GENMASK(12, 10)
+	#define PHY_R1_PHY_RX0_EQ				GENMASK(15, 13)
+	#define PHY_R1_PHY_LOS_LEVEL				GENMASK(20, 16)
+	#define PHY_R1_PHY_LOS_BIAS				GENMASK(23, 21)
+	#define PHY_R1_PHY_REF_CLKDIV2				BIT(24)
+	#define PHY_R1_PHY_MPLL_MULTIPLIER			GENMASK(31, 25)
+
+#define PHY_R2							0x08
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB			GENMASK(5, 0)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB			GENMASK(11, 6)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN1			GENMASK(17, 12)
+	#define PHY_R2_PHY_TX_VBOOST_LVL			GENMASK(20, 18)
+
+#define PHY_R4							0x10
+	#define PHY_R4_PHY_CR_WRITE				BIT(0)
+	#define PHY_R4_PHY_CR_READ				BIT(1)
+	#define PHY_R4_PHY_CR_DATA_IN				GENMASK(17, 2)
+	#define PHY_R4_PHY_CR_CAP_DATA				BIT(18)
+	#define PHY_R4_PHY_CR_CAP_ADDR				BIT(19)
+
+#define PHY_R5							0x14
+	#define PHY_R5_PHY_CR_DATA_OUT				GENMASK(15, 0)
+	#define PHY_R5_PHY_CR_ACK				BIT(16)
+	#define PHY_R5_PHY_BS_OUT				BIT(17)
+
+struct phy_g12a_usb3_pcie_priv {
+	struct regmap		*regmap;
+	struct regmap		*regmap_cr;
+	struct clk		*clk_ref;
+	struct reset_control	*reset;
+	struct phy		*phy;
+	unsigned int		mode;
+};
+
+static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_R5,
+};
+
+static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
+					  unsigned int addr)
+{
+	unsigned int val, reg;
+	int ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr,
+					  unsigned int *data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+	regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr,
+					   unsigned int data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val, reg;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
+	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
+	.max_register = 0xffff,
+	.fast_io = true,
+};
+
+static int phy_g12a_usb3_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int data, ret;
+
+	/* Switch PHY to USB3 */
+	/* TODO figure out how to handle when PCIe was set in the bootloader */
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_USB3_SWITCH,
+			   PHY_R0_PCIE_USB3_SWITCH);
+
+	/*
+	 * WORKAROUND: There is SSPHY suspend bug due to
+	 * which USB enumerates
+	 * in HS mode instead of SS mode. Workaround it by asserting
+	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
+	 * mode
+	 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20);
+	if (ret)
+		return ret;
+
+	/*
+	 * Fix RX Equalization setting as follows
+	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1006, &data);
+	if (ret)
+		return ret;
+
+	data &= ~BIT(6);
+	data |= BIT(7);
+	data &= ~(0x7 << 8);
+	data |= (0x3 << 8);
+	data |= (1 << 11);
+	ret = regmap_write(priv->regmap_cr, 0x1006, data);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set EQ and TX launch amplitudes as follows
+	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
+	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
+	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1002, &data);
+	if (ret)
+		return ret;
+
+	data &= ~0x3f80;
+	data |= (0x16 << 7);
+	data &= ~0x7f;
+	data |= (0x7f | BIT(14));
+	ret = regmap_write(priv->regmap_cr, 0x1002, data);
+	if (ret)
+		return ret;
+
+	/* MPLL_LOOP_CTL.PROP_CNTRL = 8 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regmap, PHY_R2,
+			PHY_R2_PHY_TX_VBOOST_LVL,
+			FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));
+
+	regmap_update_bits(priv->regmap, PHY_R1,
+			PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
+			FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
+			FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return phy_g12a_usb3_init(phy);
+
+	/* Power UP PCIE */
+	/* TODO figure out when the bootloader has set USB3 mode before */
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_exit(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	return reset_control_reset(priv->reset);
+}
+
+static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev);
+	unsigned int mode;
+
+	if (args->args_count < 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	mode = args->args[0];
+
+	if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) {
+		dev_err(dev, "invalid phy mode select argument\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	priv->mode = mode;
+
+	return priv->phy;
+}
+
+static const struct phy_ops phy_g12a_usb3_pcie_ops = {
+	.init		= phy_g12a_usb3_pcie_init,
+	.exit		= phy_g12a_usb3_pcie_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_g12a_usb3_pcie_priv *priv;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_g12a_usb3_pcie_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->regmap_cr = devm_regmap_init(dev, NULL, priv,
+					   &phy_g12a_usb3_pcie_cr_regmap_conf);
+	if (IS_ERR(priv->regmap_cr))
+		return PTR_ERR(priv->regmap_cr);
+
+	priv->clk_ref = devm_clk_get(dev, "ref_clk");
+	if (IS_ERR(priv->clk_ref))
+		return PTR_ERR(priv->clk_ref);
+
+	ret = clk_prepare_enable(priv->clk_ref);
+	if (ret)
+		goto err_disable_clk_ref;
+
+	priv->reset = devm_reset_control_array_get(dev, false, false);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
+	if (IS_ERR(priv->phy)) {
+		ret = PTR_ERR(priv->phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+
+		return ret;
+	}
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+						     phy_g12a_usb3_pcie_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+
+err_disable_clk_ref:
+	clk_disable_unprepare(priv->clk_ref);
+
+	return ret;
+}
+
+static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
+	{ .compatible = "amlogic,g12a-usb3-pcie-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match);
+
+static struct platform_driver phy_g12a_usb3_pcie_driver = {
+	.probe	= phy_g12a_usb3_pcie_probe,
+	.driver	= {
+		.name		= "phy-g12a-usb3-pcie",
+		.of_match_table	= phy_g12a_usb3_pcie_of_match,
+	},
+};
+module_platform_driver(phy_g12a_usb3_pcie_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 148ef0bdb9c1..4cbee412f2b0 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -261,14 +261,9 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	priv->clk = devm_clk_get(dev, "phy");
-	if (IS_ERR(priv->clk)) {
-		ret = PTR_ERR(priv->clk);
-		if (ret == -ENOENT)
-			priv->clk = NULL;
-		else
-			return ret;
-	}
+	priv->clk = devm_clk_get_optional(dev, "phy");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
 
 	priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
 	if (IS_ERR(priv->reset))