net: qcom/emac: move phy init code to separate files

The internal PHY of the EMAC differs on each SOC, and the list will
only continue to grow.  By separating the code into individual files,
we can add support for more SOCs more cleanly.

Note: The internal PHY is also sometimes called the SGMII device.

We also stop referring to the various PHY variations by version number,
so no more "v2", "v3", etc.  Instead, the devices are named after the
SOC they are, which is in sync with the device tree property names.

Future patches will probably rearrange more code among the files.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 478 insertions, 523 deletions

diff --git a/drivers/net/ethernet/qualcomm/emac/Makefile b/drivers/net/ethernet/qualcomm/emac/Makefile
index 01ee144c6386..204b787183ab 100644
--- a/drivers/net/ethernet/qualcomm/emac/Makefile
+++ b/drivers/net/ethernet/qualcomm/emac/Makefile
@@ -4,4 +4,5 @@
 
 obj-$(CONFIG_QCOM_EMAC) += qcom-emac.o
 
-qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o
+qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o \
+		  emac-sgmii-fsm9900.o emac-sgmii-qdf2432.o
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c
new file mode 100644
index 000000000000..af690e1a6e7b
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c
@@ -0,0 +1,245 @@
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* Qualcomm Technologies, Inc. FSM9900 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_QSERDES register offsets */
+#define EMAC_QSERDES_COM_SYS_CLK_CTRL		0x0000
+#define EMAC_QSERDES_COM_PLL_CNTRL		0x0014
+#define EMAC_QSERDES_COM_PLL_IP_SETI		0x0018
+#define EMAC_QSERDES_COM_PLL_CP_SETI		0x0024
+#define EMAC_QSERDES_COM_PLL_IP_SETP		0x0028
+#define EMAC_QSERDES_COM_PLL_CP_SETP		0x002c
+#define EMAC_QSERDES_COM_SYSCLK_EN_SEL		0x0038
+#define EMAC_QSERDES_COM_RESETSM_CNTRL		0x0040
+#define EMAC_QSERDES_COM_PLLLOCK_CMP1		0x0044
+#define EMAC_QSERDES_COM_PLLLOCK_CMP2		0x0048
+#define EMAC_QSERDES_COM_PLLLOCK_CMP3		0x004c
+#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN		0x0050
+#define EMAC_QSERDES_COM_DEC_START1		0x0064
+#define EMAC_QSERDES_COM_DIV_FRAC_START1	0x0098
+#define EMAC_QSERDES_COM_DIV_FRAC_START2	0x009c
+#define EMAC_QSERDES_COM_DIV_FRAC_START3	0x00a0
+#define EMAC_QSERDES_COM_DEC_START2		0x00a4
+#define EMAC_QSERDES_COM_PLL_CRCTRL		0x00ac
+#define EMAC_QSERDES_COM_RESET_SM		0x00bc
+#define EMAC_QSERDES_TX_BIST_MODE_LANENO	0x0100
+#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL	0x0108
+#define EMAC_QSERDES_TX_TX_DRV_LVL		0x010c
+#define EMAC_QSERDES_TX_LANE_MODE		0x0150
+#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN	0x0170
+#define EMAC_QSERDES_RX_CDR_CONTROL		0x0200
+#define EMAC_QSERDES_RX_CDR_CONTROL2		0x0210
+#define EMAC_QSERDES_RX_RX_EQ_GAIN12		0x0230
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_SERDES_START		0x0000
+#define EMAC_SGMII_PHY_CMN_PWR_CTRL		0x0004
+#define EMAC_SGMII_PHY_RX_PWR_CTRL		0x0008
+#define EMAC_SGMII_PHY_TX_PWR_CTRL		0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1		0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0		0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0		0x0080
+#define EMAC_SGMII_PHY_INTERRUPT_MASK		0x00b4
+
+#define PLL_IPSETI(x)				((x) & 0x3f)
+
+#define PLL_CPSETI(x)				((x) & 0xff)
+
+#define PLL_IPSETP(x)				((x) & 0x3f)
+
+#define PLL_CPSETP(x)				((x) & 0x1f)
+
+#define PLL_RCTRL(x)				(((x) & 0xf) << 4)
+#define PLL_CCTRL(x)				((x) & 0xf)
+
+#define LANE_MODE(x)				((x) & 0x1f)
+
+#define SYSCLK_CM				BIT(4)
+#define SYSCLK_AC_COUPLE			BIT(3)
+
+#define OCP_EN					BIT(5)
+#define PLL_DIV_FFEN				BIT(2)
+#define PLL_DIV_ORD				BIT(1)
+
+#define SYSCLK_SEL_CMOS				BIT(3)
+
+#define FRQ_TUNE_MODE				BIT(4)
+
+#define PLLLOCK_CMP_EN				BIT(0)
+
+#define DEC_START1_MUX				BIT(7)
+#define DEC_START1(x)				((x) & 0x7f)
+
+#define DIV_FRAC_START_MUX			BIT(7)
+#define DIV_FRAC_START(x)			((x) & 0x7f)
+
+#define DIV_FRAC_START3_MUX			BIT(4)
+#define DIV_FRAC_START3(x)			((x) & 0xf)
+
+#define DEC_START2_MUX				BIT(1)
+#define DEC_START2				BIT(0)
+
+#define READY					BIT(5)
+
+#define TX_EMP_POST1_LVL_MUX			BIT(5)
+#define TX_EMP_POST1_LVL(x)			((x) & 0x1f)
+
+#define TX_DRV_LVL_MUX				BIT(4)
+#define TX_DRV_LVL(x)				((x) & 0xf)
+
+#define EMP_EN_MUX				BIT(1)
+#define EMP_EN					BIT(0)
+
+#define SECONDORDERENABLE			BIT(6)
+#define FIRSTORDER_THRESH(x)			(((x) & 0x7) << 3)
+#define SECONDORDERGAIN(x)			((x) & 0x7)
+
+#define RX_EQ_GAIN2(x)				(((x) & 0xf) << 4)
+#define RX_EQ_GAIN1(x)				((x) & 0xf)
+
+#define SERDES_START				BIT(0)
+
+#define BIAS_EN					BIT(6)
+#define PLL_EN					BIT(5)
+#define SYSCLK_EN				BIT(4)
+#define CLKBUF_L_EN				BIT(3)
+#define PLL_TXCLK_EN				BIT(1)
+#define PLL_RXCLK_EN				BIT(0)
+
+#define L0_RX_SIGDET_EN				BIT(7)
+#define L0_RX_TERM_MODE(x)			(((x) & 3) << 4)
+#define L0_RX_I_EN				BIT(1)
+
+#define L0_TX_EN				BIT(5)
+#define L0_CLKBUF_EN				BIT(4)
+#define L0_TRAN_BIAS_EN				BIT(1)
+
+#define L0_RX_EQUALIZE_ENABLE			BIT(6)
+#define L0_RESET_TSYNC_EN			BIT(4)
+#define L0_DRV_LVL(x)				((x) & 0xf)
+
+#define PWRDN_B					BIT(0)
+#define CDR_MAX_CNT(x)				((x) & 0xff)
+
+#define PLLLOCK_CMP(x)				((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES			100
+
+struct emac_reg_write {
+	unsigned int offset;
+	u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+			       const struct emac_reg_write *itr, size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; ++itr, ++i)
+		writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+	{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+	{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+	{EMAC_SGMII_PHY_CMN_PWR_CTRL,
+		BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
+	{EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
+	{EMAC_SGMII_PHY_RX_PWR_CTRL,
+		L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
+	{EMAC_SGMII_PHY_CMN_PWR_CTRL,
+		BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
+		PLL_RXCLK_EN},
+	{EMAC_SGMII_PHY_LANE_CTRL1,
+		L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
+};
+
+static const struct emac_reg_write sysclk_refclk_setting[] = {
+	{EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
+	{EMAC_QSERDES_COM_SYS_CLK_CTRL,	SYSCLK_CM | SYSCLK_AC_COUPLE},
+};
+
+static const struct emac_reg_write pll_setting[] = {
+	{EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
+	{EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
+	{EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
+	{EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
+	{EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
+	{EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
+	{EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
+	{EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
+	{EMAC_QSERDES_COM_DIV_FRAC_START1,
+		DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
+	{EMAC_QSERDES_COM_DIV_FRAC_START2,
+		DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
+	{EMAC_QSERDES_COM_DIV_FRAC_START3,
+		DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
+	{EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
+};
+
+static const struct emac_reg_write cdr_setting[] = {
+	{EMAC_QSERDES_RX_CDR_CONTROL,
+		SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
+	{EMAC_QSERDES_RX_CDR_CONTROL2,
+		SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
+};
+
+static const struct emac_reg_write tx_rx_setting[] = {
+	{EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
+	{EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
+	{EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
+	{EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
+		TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
+	{EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
+	{EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
+};
+
+int emac_sgmii_init_fsm9900(struct emac_adapter *adpt)
+{
+	struct emac_phy *phy = &adpt->phy;
+	unsigned int i;
+
+	emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+			   ARRAY_SIZE(physical_coding_sublayer_programming));
+	emac_reg_write_all(phy->base, sysclk_refclk_setting,
+			   ARRAY_SIZE(sysclk_refclk_setting));
+	emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
+	emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
+	emac_reg_write_all(phy->base, tx_rx_setting, ARRAY_SIZE(tx_rx_setting));
+
+	/* Power up the Ser/Des engine */
+	writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
+
+	for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+		if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
+			break;
+		usleep_range(100, 200);
+	}
+
+	if (i == SERDES_START_WAIT_TIMES) {
+		netdev_err(adpt->netdev, "error: ser/des failed to start\n");
+		return -EIO;
+	}
+	/* Mask out all the SGMII Interrupt */
+	writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c
new file mode 100644
index 000000000000..6170200d7479
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c
@@ -0,0 +1,210 @@
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* Qualcomm Technologies, Inc. QDF2432 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_TX_PWR_CTRL		0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1		0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0		0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0		0x0080
+#define EMAC_SGMII_PHY_RESET_CTRL		0x00a8
+#define EMAC_SGMII_PHY_INTERRUPT_MASK		0x00b4
+
+/* SGMII digital lane registers */
+#define EMAC_SGMII_LN_DRVR_CTRL0		0x000C
+#define EMAC_SGMII_LN_DRVR_TAP_EN		0x0018
+#define EMAC_SGMII_LN_TX_MARGINING		0x001C
+#define EMAC_SGMII_LN_TX_PRE			0x0020
+#define EMAC_SGMII_LN_TX_POST			0x0024
+#define EMAC_SGMII_LN_TX_BAND_MODE		0x0060
+#define EMAC_SGMII_LN_LANE_MODE			0x0064
+#define EMAC_SGMII_LN_PARALLEL_RATE		0x0078
+#define EMAC_SGMII_LN_CML_CTRL_MODE0		0x00B8
+#define EMAC_SGMII_LN_MIXER_CTRL_MODE0		0x00D0
+#define EMAC_SGMII_LN_VGA_INITVAL		0x0134
+#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0	0x017C
+#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0	0x0188
+#define EMAC_SGMII_LN_UCDR_SO_CONFIG		0x0194
+#define EMAC_SGMII_LN_RX_BAND			0x019C
+#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0	0x01B8
+#define EMAC_SGMII_LN_RSM_CONFIG		0x01F0
+#define EMAC_SGMII_LN_SIGDET_ENABLES		0x0224
+#define EMAC_SGMII_LN_SIGDET_CNTRL		0x0228
+#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL	0x022C
+#define EMAC_SGMII_LN_RX_EN_SIGNAL		0x02A0
+#define EMAC_SGMII_LN_RX_MISC_CNTRL0		0x02AC
+#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV		0x02BC
+
+/* SGMII digital lane register values */
+#define UCDR_STEP_BY_TWO_MODE0			BIT(7)
+#define UCDR_xO_GAIN_MODE(x)			((x) & 0x7f)
+#define UCDR_ENABLE				BIT(6)
+#define UCDR_SO_SATURATION(x)			((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS4			BIT(7)
+#define SIGDET_EN_PS0_TO_PS2			BIT(6)
+
+#define TXVAL_VALID_INIT			BIT(4)
+#define KR_PCIGEN3_MODE				BIT(0)
+
+#define MAIN_EN					BIT(0)
+
+#define TX_MARGINING_MUX			BIT(6)
+#define TX_MARGINING(x)				((x) & 0x3f)
+
+#define TX_PRE_MUX				BIT(6)
+
+#define TX_POST_MUX				BIT(6)
+
+#define CML_GEAR_MODE(x)			(((x) & 7) << 3)
+#define CML2CMOS_IBOOST_MODE(x)			((x) & 7)
+
+#define MIXER_LOADB_MODE(x)			(((x) & 0xf) << 2)
+#define MIXER_DATARATE_MODE(x)			((x) & 3)
+
+#define VGA_THRESH_DFE(x)			((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS0_TO_PS2		BIT(5)
+#define SIGDET_FLT_BYP				BIT(0)
+
+#define SIGDET_LVL(x)				(((x) & 0xf) << 4)
+
+#define SIGDET_DEGLITCH_CTRL(x)			(((x) & 0xf) << 1)
+
+#define DRVR_LOGIC_CLK_EN			BIT(4)
+#define DRVR_LOGIC_CLK_DIV(x)			((x) & 0xf)
+
+#define PARALLEL_RATE_MODE0(x)			((x) & 0x3)
+
+#define BAND_MODE0(x)				((x) & 0x3)
+
+#define LANE_MODE(x)				((x) & 0x1f)
+
+#define CDR_PD_SEL_MODE0(x)			(((x) & 0x3) << 5)
+#define BYPASS_RSM_SAMP_CAL			BIT(1)
+#define BYPASS_RSM_DLL_CAL			BIT(0)
+
+#define L0_RX_EQUALIZE_ENABLE			BIT(6)
+
+#define PWRDN_B					BIT(0)
+
+#define CDR_MAX_CNT(x)				((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES			100
+
+struct emac_reg_write {
+	unsigned int offset;
+	u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+			       const struct emac_reg_write *itr, size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; ++itr, ++i)
+		writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write sgmii_laned[] = {
+	/* CDR Settings */
+	{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
+		UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
+	{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
+	{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
+
+	/* TX/RX Settings */
+	{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
+
+	{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
+	{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
+	{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
+	{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
+	{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
+
+	{EMAC_SGMII_LN_CML_CTRL_MODE0,
+		CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
+	{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
+		MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
+	{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
+	{EMAC_SGMII_LN_SIGDET_ENABLES,
+		SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
+	{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
+
+	{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
+	{EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
+	{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
+		DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
+
+	{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
+	{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
+	{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
+	{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
+	{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
+	{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
+};
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+	{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+	{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+	{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
+	{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
+};
+
+int emac_sgmii_init_qdf2432(struct emac_adapter *adpt)
+{
+	struct emac_phy *phy = &adpt->phy;
+	void __iomem *phy_regs = phy->base;
+	void __iomem *laned = phy->digital;
+	unsigned int i;
+	u32 lnstatus;
+
+	/* PCS lane-x init */
+	emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+			   ARRAY_SIZE(physical_coding_sublayer_programming));
+
+	/* SGMII lane-x init */
+	emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
+
+	/* Power up PCS and start reset lane state machine */
+
+	writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
+	writel(1, laned + SGMII_LN_RSM_START);
+
+	/* Wait for c_ready assertion */
+	for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+		lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
+		if (lnstatus & BIT(1))
+			break;
+		usleep_range(100, 200);
+	}
+
+	if (i == SERDES_START_WAIT_TIMES) {
+		netdev_err(adpt->netdev, "SGMII failed to start\n");
+		return -EIO;
+	}
+
+	/* Disable digital and SERDES loopback */
+	writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
+	writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
+	writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
+
+	/* Mask out all the SGMII Interrupt */
+	writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
index 72fe343c7a36..0b25c46dc15c 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
@@ -20,448 +20,33 @@
 #include "emac-mac.h"
 #include "emac-sgmii.h"
 
-/* EMAC_QSERDES register offsets */
-#define EMAC_QSERDES_COM_SYS_CLK_CTRL		0x000000
-#define EMAC_QSERDES_COM_PLL_CNTRL		0x000014
-#define EMAC_QSERDES_COM_PLL_IP_SETI		0x000018
-#define EMAC_QSERDES_COM_PLL_CP_SETI		0x000024
-#define EMAC_QSERDES_COM_PLL_IP_SETP		0x000028
-#define EMAC_QSERDES_COM_PLL_CP_SETP		0x00002c
-#define EMAC_QSERDES_COM_SYSCLK_EN_SEL		0x000038
-#define EMAC_QSERDES_COM_RESETSM_CNTRL		0x000040
-#define EMAC_QSERDES_COM_PLLLOCK_CMP1		0x000044
-#define EMAC_QSERDES_COM_PLLLOCK_CMP2		0x000048
-#define EMAC_QSERDES_COM_PLLLOCK_CMP3		0x00004c
-#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN		0x000050
-#define EMAC_QSERDES_COM_DEC_START1		0x000064
-#define EMAC_QSERDES_COM_DIV_FRAC_START1	0x000098
-#define EMAC_QSERDES_COM_DIV_FRAC_START2	0x00009c
-#define EMAC_QSERDES_COM_DIV_FRAC_START3	0x0000a0
-#define EMAC_QSERDES_COM_DEC_START2		0x0000a4
-#define EMAC_QSERDES_COM_PLL_CRCTRL		0x0000ac
-#define EMAC_QSERDES_COM_RESET_SM		0x0000bc
-#define EMAC_QSERDES_TX_BIST_MODE_LANENO	0x000100
-#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL	0x000108
-#define EMAC_QSERDES_TX_TX_DRV_LVL		0x00010c
-#define EMAC_QSERDES_TX_LANE_MODE		0x000150
-#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN	0x000170
-#define EMAC_QSERDES_RX_CDR_CONTROL		0x000200
-#define EMAC_QSERDES_RX_CDR_CONTROL2		0x000210
-#define EMAC_QSERDES_RX_RX_EQ_GAIN12		0x000230
-
 /* EMAC_SGMII register offsets */
-#define EMAC_SGMII_PHY_SERDES_START		0x000000
-#define EMAC_SGMII_PHY_CMN_PWR_CTRL		0x000004
-#define EMAC_SGMII_PHY_RX_PWR_CTRL		0x000008
-#define EMAC_SGMII_PHY_TX_PWR_CTRL		0x00000C
-#define EMAC_SGMII_PHY_LANE_CTRL1		0x000018
-#define EMAC_SGMII_PHY_AUTONEG_CFG2		0x000048
-#define EMAC_SGMII_PHY_CDR_CTRL0		0x000058
-#define EMAC_SGMII_PHY_SPEED_CFG1		0x000074
-#define EMAC_SGMII_PHY_POW_DWN_CTRL0		0x000080
-#define EMAC_SGMII_PHY_RESET_CTRL		0x0000a8
-#define EMAC_SGMII_PHY_IRQ_CMD			0x0000ac
-#define EMAC_SGMII_PHY_INTERRUPT_CLEAR		0x0000b0
-#define EMAC_SGMII_PHY_INTERRUPT_MASK		0x0000b4
-#define EMAC_SGMII_PHY_INTERRUPT_STATUS		0x0000b8
-#define EMAC_SGMII_PHY_RX_CHK_STATUS		0x0000d4
-#define EMAC_SGMII_PHY_AUTONEG0_STATUS		0x0000e0
-#define EMAC_SGMII_PHY_AUTONEG1_STATUS		0x0000e4
-
-/* EMAC_QSERDES_COM_PLL_IP_SETI */
-#define PLL_IPSETI(x)				((x) & 0x3f)
-
-/* EMAC_QSERDES_COM_PLL_CP_SETI */
-#define PLL_CPSETI(x)				((x) & 0xff)
-
-/* EMAC_QSERDES_COM_PLL_IP_SETP */
-#define PLL_IPSETP(x)				((x) & 0x3f)
-
-/* EMAC_QSERDES_COM_PLL_CP_SETP */
-#define PLL_CPSETP(x)				((x) & 0x1f)
-
-/* EMAC_QSERDES_COM_PLL_CRCTRL */
-#define PLL_RCTRL(x)				(((x) & 0xf) << 4)
-#define PLL_CCTRL(x)				((x) & 0xf)
-
-/* SGMII v2 PHY registers per lane */
-#define EMAC_SGMII_PHY_LN_OFFSET		0x0400
-
-/* SGMII v2 digital lane registers */
-#define EMAC_SGMII_LN_DRVR_CTRL0		0x00C
-#define EMAC_SGMII_LN_DRVR_TAP_EN		0x018
-#define EMAC_SGMII_LN_TX_MARGINING		0x01C
-#define EMAC_SGMII_LN_TX_PRE			0x020
-#define EMAC_SGMII_LN_TX_POST			0x024
-#define EMAC_SGMII_LN_TX_BAND_MODE		0x060
-#define EMAC_SGMII_LN_LANE_MODE			0x064
-#define EMAC_SGMII_LN_PARALLEL_RATE		0x078
-#define EMAC_SGMII_LN_CML_CTRL_MODE0		0x0B8
-#define EMAC_SGMII_LN_MIXER_CTRL_MODE0		0x0D0
-#define EMAC_SGMII_LN_VGA_INITVAL		0x134
-#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0	0x17C
-#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0	0x188
-#define EMAC_SGMII_LN_UCDR_SO_CONFIG		0x194
-#define EMAC_SGMII_LN_RX_BAND			0x19C
-#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0	0x1B8
-#define EMAC_SGMII_LN_RSM_CONFIG		0x1F0
-#define EMAC_SGMII_LN_SIGDET_ENABLES		0x224
-#define EMAC_SGMII_LN_SIGDET_CNTRL		0x228
-#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL	0x22C
-#define EMAC_SGMII_LN_RX_EN_SIGNAL		0x2A0
-#define EMAC_SGMII_LN_RX_MISC_CNTRL0		0x2AC
-#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV		0x2BC
-
-/* SGMII v2 digital lane register values */
-#define UCDR_STEP_BY_TWO_MODE0			BIT(7)
-#define UCDR_xO_GAIN_MODE(x)			((x) & 0x7f)
-#define UCDR_ENABLE				BIT(6)
-#define UCDR_SO_SATURATION(x)			((x) & 0x3f)
-#define SIGDET_LP_BYP_PS4			BIT(7)
-#define SIGDET_EN_PS0_TO_PS2			BIT(6)
-#define EN_ACCOUPLEVCM_SW_MUX			BIT(5)
-#define EN_ACCOUPLEVCM_SW			BIT(4)
-#define RX_SYNC_EN				BIT(3)
-#define RXTERM_HIGHZ_PS5			BIT(2)
-#define SIGDET_EN_PS3				BIT(1)
-#define EN_ACCOUPLE_VCM_PS3			BIT(0)
-#define UFS_MODE				BIT(5)
-#define TXVAL_VALID_INIT			BIT(4)
-#define TXVAL_VALID_MUX				BIT(3)
-#define TXVAL_VALID				BIT(2)
-#define USB3P1_MODE				BIT(1)
-#define KR_PCIGEN3_MODE				BIT(0)
-#define PRE_EN					BIT(3)
-#define POST_EN					BIT(2)
-#define MAIN_EN_MUX				BIT(1)
-#define MAIN_EN					BIT(0)
-#define TX_MARGINING_MUX			BIT(6)
-#define TX_MARGINING(x)				((x) & 0x3f)
-#define TX_PRE_MUX				BIT(6)
-#define TX_PRE(x)				((x) & 0x3f)
-#define TX_POST_MUX				BIT(6)
-#define TX_POST(x)				((x) & 0x3f)
-#define CML_GEAR_MODE(x)			(((x) & 7) << 3)
-#define CML2CMOS_IBOOST_MODE(x)			((x) & 7)
-#define MIXER_LOADB_MODE(x)			(((x) & 0xf) << 2)
-#define MIXER_DATARATE_MODE(x)			((x) & 3)
-#define VGA_THRESH_DFE(x)			((x) & 0x3f)
-#define SIGDET_LP_BYP_PS0_TO_PS2		BIT(5)
-#define SIGDET_LP_BYP_MUX			BIT(4)
-#define SIGDET_LP_BYP				BIT(3)
-#define SIGDET_EN_MUX				BIT(2)
-#define SIGDET_EN				BIT(1)
-#define SIGDET_FLT_BYP				BIT(0)
-#define SIGDET_LVL(x)				(((x) & 0xf) << 4)
-#define SIGDET_BW_CTRL(x)			((x) & 0xf)
-#define SIGDET_DEGLITCH_CTRL(x)			(((x) & 0xf) << 1)
-#define SIGDET_DEGLITCH_BYP			BIT(0)
-#define INVERT_PCS_RX_CLK			BIT(7)
-#define PWM_EN					BIT(6)
-#define RXBIAS_SEL(x)				(((x) & 0x3) << 4)
-#define EBDAC_SIGN				BIT(3)
-#define EDAC_SIGN				BIT(2)
-#define EN_AUXTAP1SIGN_INVERT			BIT(1)
-#define EN_DAC_CHOPPING				BIT(0)
-#define DRVR_LOGIC_CLK_EN			BIT(4)
-#define DRVR_LOGIC_CLK_DIV(x)			((x) & 0xf)
-#define PARALLEL_RATE_MODE2(x)			(((x) & 0x3) << 4)
-#define PARALLEL_RATE_MODE1(x)			(((x) & 0x3) << 2)
-#define PARALLEL_RATE_MODE0(x)			((x) & 0x3)
-#define BAND_MODE2(x)				(((x) & 0x3) << 4)
-#define BAND_MODE1(x)				(((x) & 0x3) << 2)
-#define BAND_MODE0(x)				((x) & 0x3)
-#define LANE_SYNC_MODE				BIT(5)
-#define LANE_MODE(x)				((x) & 0x1f)
-#define CDR_PD_SEL_MODE0(x)			(((x) & 0x3) << 5)
-#define EN_DLL_MODE0				BIT(4)
-#define EN_IQ_DCC_MODE0				BIT(3)
-#define EN_IQCAL_MODE0				BIT(2)
-#define EN_QPATH_MODE0				BIT(1)
-#define EN_EPATH_MODE0				BIT(0)
-#define FORCE_TSYNC_ACK				BIT(7)
-#define FORCE_CMN_ACK				BIT(6)
-#define FORCE_CMN_READY				BIT(5)
-#define EN_RCLK_DEGLITCH			BIT(4)
-#define BYPASS_RSM_CDR_RESET			BIT(3)
-#define BYPASS_RSM_TSYNC			BIT(2)
-#define BYPASS_RSM_SAMP_CAL			BIT(1)
-#define BYPASS_RSM_DLL_CAL			BIT(0)
-
-/* EMAC_QSERDES_COM_SYS_CLK_CTRL */
-#define SYSCLK_CM				BIT(4)
-#define SYSCLK_AC_COUPLE			BIT(3)
-
-/* EMAC_QSERDES_COM_PLL_CNTRL */
-#define OCP_EN					BIT(5)
-#define PLL_DIV_FFEN				BIT(2)
-#define PLL_DIV_ORD				BIT(1)
-
-/* EMAC_QSERDES_COM_SYSCLK_EN_SEL */
-#define SYSCLK_SEL_CMOS				BIT(3)
-
-/* EMAC_QSERDES_COM_RESETSM_CNTRL */
-#define FRQ_TUNE_MODE				BIT(4)
-
-/* EMAC_QSERDES_COM_PLLLOCK_CMP_EN */
-#define PLLLOCK_CMP_EN				BIT(0)
-
-/* EMAC_QSERDES_COM_DEC_START1 */
-#define DEC_START1_MUX				BIT(7)
-#define DEC_START1(x)				((x) & 0x7f)
-
-/* EMAC_QSERDES_COM_DIV_FRAC_START1 * EMAC_QSERDES_COM_DIV_FRAC_START2 */
-#define DIV_FRAC_START_MUX			BIT(7)
-#define DIV_FRAC_START(x)			((x) & 0x7f)
-
-/* EMAC_QSERDES_COM_DIV_FRAC_START3 */
-#define DIV_FRAC_START3_MUX			BIT(4)
-#define DIV_FRAC_START3(x)			((x) & 0xf)
-
-/* EMAC_QSERDES_COM_DEC_START2 */
-#define DEC_START2_MUX				BIT(1)
-#define DEC_START2				BIT(0)
-
-/* EMAC_QSERDES_COM_RESET_SM */
-#define READY					BIT(5)
-
-/* EMAC_QSERDES_TX_TX_EMP_POST1_LVL */
-#define TX_EMP_POST1_LVL_MUX			BIT(5)
-#define TX_EMP_POST1_LVL(x)			((x) & 0x1f)
-#define TX_EMP_POST1_LVL_BMSK			0x1f
-#define TX_EMP_POST1_LVL_SHFT			0
-
-/* EMAC_QSERDES_TX_TX_DRV_LVL */
-#define TX_DRV_LVL_MUX				BIT(4)
-#define TX_DRV_LVL(x)				((x) & 0xf)
-
-/* EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN */
-#define EMP_EN_MUX				BIT(1)
-#define EMP_EN					BIT(0)
-
-/* EMAC_QSERDES_RX_CDR_CONTROL & EMAC_QSERDES_RX_CDR_CONTROL2 */
-#define HBW_PD_EN				BIT(7)
-#define SECONDORDERENABLE			BIT(6)
-#define FIRSTORDER_THRESH(x)			(((x) & 0x7) << 3)
-#define SECONDORDERGAIN(x)			((x) & 0x7)
-
-/* EMAC_QSERDES_RX_RX_EQ_GAIN12 */
-#define RX_EQ_GAIN2(x)				(((x) & 0xf) << 4)
-#define RX_EQ_GAIN1(x)				((x) & 0xf)
-
-/* EMAC_SGMII_PHY_SERDES_START */
-#define SERDES_START				BIT(0)
-
-/* EMAC_SGMII_PHY_CMN_PWR_CTRL */
-#define BIAS_EN					BIT(6)
-#define PLL_EN					BIT(5)
-#define SYSCLK_EN				BIT(4)
-#define CLKBUF_L_EN				BIT(3)
-#define PLL_TXCLK_EN				BIT(1)
-#define PLL_RXCLK_EN				BIT(0)
-
-/* EMAC_SGMII_PHY_RX_PWR_CTRL */
-#define L0_RX_SIGDET_EN				BIT(7)
-#define L0_RX_TERM_MODE(x)			(((x) & 3) << 4)
-#define L0_RX_I_EN				BIT(1)
-
-/* EMAC_SGMII_PHY_TX_PWR_CTRL */
-#define L0_TX_EN				BIT(5)
-#define L0_CLKBUF_EN				BIT(4)
-#define L0_TRAN_BIAS_EN				BIT(1)
-
-/* EMAC_SGMII_PHY_LANE_CTRL1 */
-#define L0_RX_EQUALIZE_ENABLE			BIT(6)
-#define L0_RESET_TSYNC_EN			BIT(4)
-#define L0_DRV_LVL(x)				((x) & 0xf)
-
-/* EMAC_SGMII_PHY_AUTONEG_CFG2 */
+#define EMAC_SGMII_PHY_AUTONEG_CFG2		0x0048
+#define EMAC_SGMII_PHY_SPEED_CFG1		0x0074
+#define EMAC_SGMII_PHY_IRQ_CMD			0x00ac
+#define EMAC_SGMII_PHY_INTERRUPT_CLEAR		0x00b0
+#define EMAC_SGMII_PHY_INTERRUPT_STATUS		0x00b8
+
 #define FORCE_AN_TX_CFG				BIT(5)
 #define FORCE_AN_RX_CFG				BIT(4)
 #define AN_ENABLE				BIT(0)
 
-/* EMAC_SGMII_PHY_SPEED_CFG1 */
 #define DUPLEX_MODE				BIT(4)
 #define SPDMODE_1000				BIT(1)
 #define SPDMODE_100				BIT(0)
 #define SPDMODE_10				0
-#define SPDMODE_BMSK				3
-#define SPDMODE_SHFT				0
-
-/* EMAC_SGMII_PHY_POW_DWN_CTRL0 */
-#define PWRDN_B					BIT(0)
-#define CDR_MAX_CNT(x)				((x) & 0xff)
-
-/* EMAC_QSERDES_TX_BIST_MODE_LANENO */
-#define BIST_LANE_NUMBER(x)			(((x) & 3) << 5)
-#define BISTMODE(x)				((x) & 0x1f)
-
-/* EMAC_QSERDES_COM_PLLLOCK_CMPx */
-#define PLLLOCK_CMP(x)				((x) & 0xff)
 
-/* EMAC_SGMII_PHY_RESET_CTRL */
-#define PHY_SW_RESET				BIT(0)
-
-/* EMAC_SGMII_PHY_IRQ_CMD */
 #define IRQ_GLOBAL_CLEAR			BIT(0)
 
-/* EMAC_SGMII_PHY_INTERRUPT_MASK */
 #define DECODE_CODE_ERR				BIT(7)
 #define DECODE_DISP_ERR				BIT(6)
-#define PLL_UNLOCK				BIT(5)
-#define AN_ILLEGAL_TERM				BIT(4)
-#define SYNC_FAIL				BIT(3)
-#define AN_START				BIT(2)
-#define AN_END					BIT(1)
-#define AN_REQUEST				BIT(0)
 
 #define SGMII_PHY_IRQ_CLR_WAIT_TIME		10
 
-#define SGMII_PHY_INTERRUPT_ERR (\
-	DECODE_CODE_ERR         |\
-	DECODE_DISP_ERR)
-
-#define SGMII_ISR_AN_MASK       (\
-	AN_REQUEST              |\
-	AN_START                |\
-	AN_END                  |\
-	AN_ILLEGAL_TERM         |\
-	PLL_UNLOCK              |\
-	SYNC_FAIL)
-
-#define SGMII_ISR_MASK          (\
-	SGMII_PHY_INTERRUPT_ERR |\
-	SGMII_ISR_AN_MASK)
-
-/* SGMII TX_CONFIG */
-#define TXCFG_LINK				0x8000
-#define TXCFG_MODE_BMSK				0x1c00
-#define TXCFG_1000_FULL				0x1800
-#define TXCFG_100_FULL				0x1400
-#define TXCFG_100_HALF				0x0400
-#define TXCFG_10_FULL				0x1000
-#define TXCFG_10_HALF				0x0000
+#define SGMII_PHY_INTERRUPT_ERR		(DECODE_CODE_ERR | DECODE_DISP_ERR)
 
 #define SERDES_START_WAIT_TIMES			100
 
-struct emac_reg_write {
-	unsigned int offset;
-	u32 val;
-};
-
-static void emac_reg_write_all(void __iomem *base,
-			       const struct emac_reg_write *itr, size_t size)
-{
-	size_t i;
-
-	for (i = 0; i < size; ++itr, ++i)
-		writel(itr->val, base + itr->offset);
-}
-
-static const struct emac_reg_write physical_coding_sublayer_programming_v1[] = {
-	{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
-	{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
-	{EMAC_SGMII_PHY_CMN_PWR_CTRL,
-		BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
-	{EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
-	{EMAC_SGMII_PHY_RX_PWR_CTRL,
-		L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
-	{EMAC_SGMII_PHY_CMN_PWR_CTRL,
-		BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
-		PLL_RXCLK_EN},
-	{EMAC_SGMII_PHY_LANE_CTRL1,
-		L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
-};
-
-static const struct emac_reg_write sysclk_refclk_setting[] = {
-	{EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
-	{EMAC_QSERDES_COM_SYS_CLK_CTRL,	SYSCLK_CM | SYSCLK_AC_COUPLE},
-};
-
-static const struct emac_reg_write pll_setting[] = {
-	{EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
-	{EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
-	{EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
-	{EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
-	{EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
-	{EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
-	{EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
-	{EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
-	{EMAC_QSERDES_COM_DIV_FRAC_START1,
-		DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
-	{EMAC_QSERDES_COM_DIV_FRAC_START2,
-		DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
-	{EMAC_QSERDES_COM_DIV_FRAC_START3,
-		DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
-	{EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
-	{EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
-	{EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
-	{EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
-	{EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
-};
-
-static const struct emac_reg_write cdr_setting[] = {
-	{EMAC_QSERDES_RX_CDR_CONTROL,
-		SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
-	{EMAC_QSERDES_RX_CDR_CONTROL2,
-		SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
-};
-
-static const struct emac_reg_write tx_rx_setting[] = {
-	{EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
-	{EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
-	{EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
-	{EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
-		TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
-	{EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
-	{EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
-};
-
-static const struct emac_reg_write sgmii_v2_laned[] = {
-	/* CDR Settings */
-	{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
-		UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
-	{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
-	{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
-
-	/* TX/RX Settings */
-	{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
-
-	{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
-	{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
-	{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
-	{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
-	{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
-
-	{EMAC_SGMII_LN_CML_CTRL_MODE0,
-		CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
-	{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
-		MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
-	{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
-	{EMAC_SGMII_LN_SIGDET_ENABLES,
-		SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
-	{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
-
-	{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
-	{EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
-	{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
-		DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
-
-	{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
-	{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
-	{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
-	{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
-	{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
-	{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
-};
-
-static const struct emac_reg_write physical_coding_sublayer_programming_v2[] = {
-	{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
-	{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
-	{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
-	{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
-};
-
 static int emac_sgmii_link_init(struct emac_adapter *adpt)
 {
 	struct phy_device *phydev = adpt->phydev;
@@ -536,98 +121,6 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
 	return 0;
 }
 
-int emac_sgmii_init_v1(struct emac_adapter *adpt)
-{
-	struct emac_phy *phy = &adpt->phy;
-	unsigned int i;
-	int ret;
-
-	ret = emac_sgmii_link_init(adpt);
-	if (ret)
-		return ret;
-
-	emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v1,
-			   ARRAY_SIZE(physical_coding_sublayer_programming_v1));
-	emac_reg_write_all(phy->base, sysclk_refclk_setting,
-			   ARRAY_SIZE(sysclk_refclk_setting));
-	emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
-	emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
-	emac_reg_write_all(phy->base, tx_rx_setting,
-			   ARRAY_SIZE(tx_rx_setting));
-
-	/* Power up the Ser/Des engine */
-	writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
-
-	for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
-		if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
-			break;
-		usleep_range(100, 200);
-	}
-
-	if (i == SERDES_START_WAIT_TIMES) {
-		netdev_err(adpt->netdev, "error: ser/des failed to start\n");
-		return -EIO;
-	}
-	/* Mask out all the SGMII Interrupt */
-	writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
-
-	emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
-
-	return 0;
-}
-
-int emac_sgmii_init_v2(struct emac_adapter *adpt)
-{
-	struct emac_phy *phy = &adpt->phy;
-	void __iomem *phy_regs = phy->base;
-	void __iomem *laned = phy->digital;
-	unsigned int i;
-	u32 lnstatus;
-	int ret;
-
-	ret = emac_sgmii_link_init(adpt);
-	if (ret)
-		return ret;
-
-	/* PCS lane-x init */
-	emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v2,
-			   ARRAY_SIZE(physical_coding_sublayer_programming_v2));
-
-	/* SGMII lane-x init */
-	emac_reg_write_all(phy->digital,
-			   sgmii_v2_laned, ARRAY_SIZE(sgmii_v2_laned));
-
-	/* Power up PCS and start reset lane state machine */
-
-	writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
-	writel(1, laned + SGMII_LN_RSM_START);
-
-	/* Wait for c_ready assertion */
-	for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
-		lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
-		if (lnstatus & BIT(1))
-			break;
-		usleep_range(100, 200);
-	}
-
-	if (i == SERDES_START_WAIT_TIMES) {
-		netdev_err(adpt->netdev, "SGMII failed to start\n");
-		return -EIO;
-	}
-
-	/* Disable digital and SERDES loopback */
-	writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
-	writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
-	writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
-
-	/* Mask out all the SGMII Interrupt */
-	writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
-
-	emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
-
-	return 0;
-}
-
 static void emac_sgmii_reset_prepare(struct emac_adapter *adpt)
 {
 	struct emac_phy *phy = &adpt->phy;
@@ -651,16 +144,19 @@ void emac_sgmii_reset(struct emac_adapter *adpt)
 {
 	int ret;
 
-	clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 19200000);
 	emac_sgmii_reset_prepare(adpt);
 
+	ret = emac_sgmii_link_init(adpt);
+	if (ret) {
+		netdev_err(adpt->netdev, "unsupported link speed\n");
+		return;
+	}
+
 	ret = adpt->phy.initialize(adpt);
 	if (ret)
 		netdev_err(adpt->netdev,
 			   "could not reinitialize internal PHY (error=%i)\n",
 			   ret);
-
-	clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000);
 }
 
 static int emac_sgmii_acpi_match(struct device *dev, void *data)
@@ -668,7 +164,7 @@ static int emac_sgmii_acpi_match(struct device *dev, void *data)
 	static const struct acpi_device_id match_table[] = {
 		{
 			.id = "QCOM8071",
-			.driver_data = (kernel_ulong_t)emac_sgmii_init_v2,
+			.driver_data = (kernel_ulong_t)emac_sgmii_init_qdf2432,
 		},
 		{}
 	};
@@ -684,11 +180,11 @@ static int emac_sgmii_acpi_match(struct device *dev, void *data)
 static const struct of_device_id emac_sgmii_dt_match[] = {
 	{
 		.compatible = "qcom,fsm9900-emac-sgmii",
-		.data = emac_sgmii_init_v1,
+		.data = emac_sgmii_init_fsm9900,
 	},
 	{
 		.compatible = "qcom,qdf2432-emac-sgmii",
-		.data = emac_sgmii_init_v2,
+		.data = emac_sgmii_init_qdf2432,
 	},
 	{}
 };
@@ -765,6 +261,8 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
 	if (ret)
 		goto error;
 
+	emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
+
 	/* We've remapped the addresses, so we don't need the device any
 	 * more.  of_find_device_by_node() says we should release it.
 	 */
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
index ce79212ff403..e2bef145ec48 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
@@ -16,9 +16,10 @@
 struct emac_adapter;
 struct platform_device;
 
-int emac_sgmii_init_v1(struct emac_adapter *adpt);
-int emac_sgmii_init_v2(struct emac_adapter *adpt);
 int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt);
 void emac_sgmii_reset(struct emac_adapter *adpt);
 
+int emac_sgmii_init_fsm9900(struct emac_adapter *adpt);
+int emac_sgmii_init_qdf2432(struct emac_adapter *adpt);
+
 #endif