Merge tag 'wireless-drivers-next-for-davem-2015-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
here's a bigger pull request for 4.4. The diffstat looks scary as we
created a new directory realtek for all realtek drivers. In the future
I'm planning to create similar directories for all vendors, currently we
just have ath, mediatek and realtek. This change has been in linux-next
for a couple of weeks so it should be safe, but of course you never
know.

There's also a new driver rtl8xxxu for few realtek USB devices. This
just made it to the last linux-next build.

Otherwise there's nothing really special, more info below. If time
permits, and it's ok for you, I'm hoping to send you a one more pull
request this week.

brcmfmac

* using netdev carrier state
* add and rework some cfg80211 callbacks mainly for AP mode
* use devcoredump when triggered by firmware event

realtek

* create new directory drivers/net/wireless/realtek/ for all realtek
  drivers, not visible to users (no kconfig changes etc)
* add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU,
  RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future

ath10k

* add board 2 API support for automatically choosing correct board file
* data path optimisations
* disable PCI power save for qca988x and QCA99x0 due to interop reasons

wil6210

* BlockAckReq support
* firmware crashdump using devcoredump
* capture all frames with sniffer
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 514 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
new file mode 100644
index 000000000000..9ebc8281ff99
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
@@ -0,0 +1,514 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+static bool _rtl8723e_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
+
+void rtl8723e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+
+	switch (bandwidth) {
+	case HT_CHANNEL_WIDTH_20:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff) | 0x0400);
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "unknown bandwidth: %#X\n", bandwidth);
+		break;
+	}
+}
+
+void rtl8723e_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+					 u8 *ppowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 tx_agc[2] = {0, 0}, tmpval;
+	bool turbo_scanoff = false;
+	u8 idx1, idx2;
+	u8 *ptr;
+
+	if (rtlefuse->eeprom_regulatory != 0)
+		turbo_scanoff = true;
+
+	if (mac->act_scanning == true) {
+		tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+		tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+
+		if (turbo_scanoff) {
+			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B;
+				idx1++) {
+				tx_agc[idx1] = ppowerlevel[idx1] |
+				    (ppowerlevel[idx1] << 8) |
+				    (ppowerlevel[idx1] << 16) |
+				    (ppowerlevel[idx1] << 24);
+			}
+		}
+	} else {
+		for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+			tx_agc[idx1] = ppowerlevel[idx1] |
+			    (ppowerlevel[idx1] << 8) |
+			    (ppowerlevel[idx1] << 16) |
+			    (ppowerlevel[idx1] << 24);
+		}
+
+		if (rtlefuse->eeprom_regulatory == 0) {
+			tmpval =
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][6]) +
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][7] <<
+			     8);
+			tx_agc[RF90_PATH_A] += tmpval;
+
+			tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][14]) +
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][15] <<
+			     24);
+			tx_agc[RF90_PATH_B] += tmpval;
+		}
+	}
+
+	for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+		ptr = (u8 *)&tx_agc[idx1];
+		for (idx2 = 0; idx2 < 4; idx2++) {
+			if (*ptr > RF6052_MAX_TX_PWR)
+				*ptr = RF6052_MAX_TX_PWR;
+			ptr++;
+		}
+	}
+
+	tmpval = tx_agc[RF90_PATH_A] & 0xff;
+	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_A_CCK1_MCS32);
+
+	tmpval = tx_agc[RF90_PATH_A] >> 8;
+
+	tmpval = tmpval & 0xff00ffff;
+
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11);
+
+	tmpval = tx_agc[RF90_PATH_B] >> 24;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11);
+
+	tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK1_55_MCS32);
+}
+
+static void rtl8723e_phy_get_power_base(struct ieee80211_hw *hw,
+					u8 *ppowerlevel, u8 channel,
+					u32 *ofdmbase, u32 *mcsbase)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 powerbase0, powerbase1;
+	u8 legacy_pwrdiff, ht20_pwrdiff;
+	u8 i, powerlevel[2];
+
+	for (i = 0; i < 2; i++) {
+		powerlevel[i] = ppowerlevel[i];
+		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff[i][channel - 1];
+		powerbase0 = powerlevel[i] + legacy_pwrdiff;
+
+		powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+		    (powerbase0 << 8) | powerbase0;
+		*(ofdmbase + i) = powerbase0;
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			" [OFDM power base index rf(%c) = 0x%x]\n",
+			 ((i == 0) ? 'A' : 'B'), *(ofdmbase + i));
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+			ht20_pwrdiff =
+				rtlefuse->txpwr_ht20diff[i][channel - 1];
+			powerlevel[i] += ht20_pwrdiff;
+		}
+		powerbase1 = powerlevel[i];
+		powerbase1 = (powerbase1 << 24) |
+		    (powerbase1 << 16) | (powerbase1 << 8) | powerbase1;
+
+		*(mcsbase + i) = powerbase1;
+
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			" [MCS power base index rf(%c) = 0x%x]\n",
+			 ((i == 0) ? 'A' : 'B'), *(mcsbase + i));
+	}
+}
+
+static void get_txpower_writeval_by_reg(struct ieee80211_hw *hw,
+					u8 channel, u8 index,
+					u32 *powerbase0,
+					u32 *powerbase1,
+					u32 *p_outwriteval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 i, chnlgroup = 0, pwr_diff_limit[4];
+	u32 writeval, customer_limit, rf;
+
+	for (rf = 0; rf < 2; rf++) {
+		switch (rtlefuse->eeprom_regulatory) {
+		case 0:
+			chnlgroup = 0;
+
+			writeval =
+			    rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index +
+								(rf ? 8 : 0)]
+			    + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"RTK better performance, writeval(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 1:
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				writeval = ((index < 2) ? powerbase0[rf] :
+					    powerbase1[rf]);
+
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					"Realtek regulatory, 40MHz, writeval(%c) = 0x%x\n",
+					((rf == 0) ? 'A' : 'B'), writeval);
+			} else {
+				if (rtlphy->pwrgroup_cnt == 1)
+					chnlgroup = 0;
+				if (rtlphy->pwrgroup_cnt >= 3) {
+					if (channel <= 3)
+						chnlgroup = 0;
+					else if (channel >= 4 && channel <= 9)
+						chnlgroup = 1;
+					else if (channel > 9)
+						chnlgroup = 2;
+					if (rtlphy->current_chan_bw ==
+						HT_CHANNEL_WIDTH_20)
+						chnlgroup++;
+					else
+						chnlgroup += 4;
+				}
+
+				writeval =
+				    rtlphy->mcs_txpwrlevel_origoffset[chnlgroup]
+				    [index + (rf ? 8 : 0)] + ((index < 2) ?
+							      powerbase0[rf] :
+							      powerbase1[rf]);
+
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					"Realtek regulatory, 20MHz, writeval(%c) = 0x%x\n",
+					((rf == 0) ? 'A' : 'B'), writeval);
+			}
+			break;
+		case 2:
+			writeval =
+			    ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Better regulatory, writeval(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 3:
+			chnlgroup = 0;
+
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					"customer's limit, 40MHz rf(%c) = 0x%x\n",
+					((rf == 0) ? 'A' : 'B'),
+					rtlefuse->pwrgroup_ht40[rf][channel -
+								     1]);
+			} else {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					"customer's limit, 20MHz rf(%c) = 0x%x\n",
+					((rf == 0) ? 'A' : 'B'),
+					rtlefuse->pwrgroup_ht20[rf][channel -
+								     1]);
+			}
+			for (i = 0; i < 4; i++) {
+				pwr_diff_limit[i] =
+				    (u8)((rtlphy->mcs_txpwrlevel_origoffset
+					  [chnlgroup][index +
+						(rf ? 8 : 0)] & (0x7f <<
+						(i * 8))) >> (i * 8));
+
+				if (rtlphy->current_chan_bw ==
+				    HT_CHANNEL_WIDTH_20_40) {
+					if (pwr_diff_limit[i] >
+					    rtlefuse->
+					    pwrgroup_ht40[rf][channel - 1])
+						pwr_diff_limit[i] =
+						    rtlefuse->pwrgroup_ht40[rf]
+						    [channel - 1];
+				} else {
+					if (pwr_diff_limit[i] >
+					    rtlefuse->
+					    pwrgroup_ht20[rf][channel - 1])
+						pwr_diff_limit[i] =
+						    rtlefuse->pwrgroup_ht20[rf]
+						    [channel - 1];
+				}
+			}
+
+			customer_limit = (pwr_diff_limit[3] << 24) |
+			    (pwr_diff_limit[2] << 16) |
+			    (pwr_diff_limit[1] << 8) | (pwr_diff_limit[0]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Customer's limit rf(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), customer_limit);
+
+			writeval = customer_limit +
+			    ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Customer, writeval rf(%c)= 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		default:
+			chnlgroup = 0;
+			writeval =
+			    rtlphy->mcs_txpwrlevel_origoffset[chnlgroup]
+			    [index + (rf ? 8 : 0)]
+			    + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"RTK better performance, writeval rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		}
+
+		if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
+			writeval = writeval - 0x06060606;
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			 TXHIGHPWRLEVEL_BT2)
+			writeval = writeval - 0x0c0c0c0c;
+		*(p_outwriteval + rf) = writeval;
+	}
+}
+
+static void _rtl8723e_write_ofdm_power_reg(struct ieee80211_hw *hw,
+					   u8 index, u32 *pvalue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+
+	u16 regoffset_a[6] = {
+		RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+		RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+		RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+	};
+	u16 regoffset_b[6] = {
+		RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+		RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+		RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+	};
+	u8 i, rf, pwr_val[4];
+	u32 writeval;
+	u16 regoffset;
+
+	for (rf = 0; rf < 2; rf++) {
+		writeval = pvalue[rf];
+		for (i = 0; i < 4; i++) {
+			pwr_val[i] = (u8)((writeval & (0x7f <<
+					   (i * 8))) >> (i * 8));
+
+			if (pwr_val[i] > RF6052_MAX_TX_PWR)
+				pwr_val[i] = RF6052_MAX_TX_PWR;
+		}
+		writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+		    (pwr_val[1] << 8) | pwr_val[0];
+
+		if (rf == 0)
+			regoffset = regoffset_a[index];
+		else
+			regoffset = regoffset_b[index];
+		rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval);
+
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			"Set 0x%x = %08x\n", regoffset, writeval);
+
+		if (((get_rf_type(rtlphy) == RF_2T2R) &&
+		     (regoffset == RTXAGC_A_MCS15_MCS12 ||
+		      regoffset == RTXAGC_B_MCS15_MCS12)) ||
+		    ((get_rf_type(rtlphy) != RF_2T2R) &&
+		     (regoffset == RTXAGC_A_MCS07_MCS04 ||
+		      regoffset == RTXAGC_B_MCS07_MCS04))) {
+
+			writeval = pwr_val[3];
+			if (regoffset == RTXAGC_A_MCS15_MCS12 ||
+			    regoffset == RTXAGC_A_MCS07_MCS04)
+				regoffset = 0xc90;
+			if (regoffset == RTXAGC_B_MCS15_MCS12 ||
+			    regoffset == RTXAGC_B_MCS07_MCS04)
+				regoffset = 0xc98;
+
+			for (i = 0; i < 3; i++) {
+				writeval = (writeval > 6) ? (writeval - 6) : 0;
+				rtl_write_byte(rtlpriv, (u32) (regoffset + i),
+					       (u8)writeval);
+			}
+		}
+	}
+}
+
+void rtl8723e_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					  u8 *ppowerlevel, u8 channel)
+{
+	u32 writeval[2], powerbase0[2], powerbase1[2];
+	u8 index;
+
+	rtl8723e_phy_get_power_base(hw, ppowerlevel,
+				    channel, &powerbase0[0], &powerbase1[0]);
+
+	for (index = 0; index < 6; index++) {
+		get_txpower_writeval_by_reg(hw, channel, index, &powerbase0[0],
+					    &powerbase1[0],
+					    &writeval[0]);
+
+		_rtl8723e_write_ofdm_power_reg(hw, index, &writeval[0]);
+	}
+}
+
+bool rtl8723e_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	return _rtl8723e_phy_rf6052_config_parafile(hw);
+}
+
+static bool _rtl8723e_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+	u32 u4_regvalue = 0;
+	u8 rfpath;
+	bool rtstatus = true;
+	struct bb_reg_def *pphyreg;
+
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV << 16);
+			break;
+		}
+
+		rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+			      B3WIREADDREAALENGTH, 0x0);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+		udelay(1);
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+			rtstatus = rtl8723e_phy_config_rf_with_headerfile(hw,
+						(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus =
+			  rtl8723e_phy_config_rf_with_headerfile(hw,
+						(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl_set_bbreg(hw, pphyreg->rfintfs,
+				      BRFSI_RFENV, u4_regvalue);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl_set_bbreg(hw, pphyreg->rfintfs,
+				      BRFSI_RFENV << 16, u4_regvalue);
+			break;
+		}
+
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 "Radio[%d] Fail!!", rfpath);
+			return false;
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "\n");
+	return rtstatus;
+}