wifi: rtlwifi: Move code from rtl8192de to rtl8192d-common

Create the new module rtl8192d-common and move some code into it from
rtl8192de. Now the rtl8192de driver (PCI) and the new rtl8192du driver
(USB) can share some of the code.

This is mostly the code that required little effort to make it
shareable. There are a few more functions which they could share, with
more changes.

Add phy_iq_calibrate member to struct rtl_hal_ops to allow moving the
TX power tracking code from dm.c.

The other changes in this patch are adjusting whitespace, renaming some
functions, making some arrays const, and making checkpatch.pl less
unhappy.

rtl8192de is compile-tested only. rtl8192d-common is tested with the
new rtl8192du driver.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/69c4358a-6fbf-4433-92a6-341c83e9dd48@gmail.com

1 files changed, 2 insertions, 89 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/dm.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/dm.h
index 939cc45bfebd..beade227b442 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/dm.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/dm.h
@@ -4,94 +4,7 @@
 #ifndef	__RTL92C_DM_H__
 #define __RTL92C_DM_H__
 
-#define HAL_DM_DIG_DISABLE			BIT(0)
-#define HAL_DM_HIPWR_DISABLE			BIT(1)
-
-#define OFDM_TABLE_LENGTH			37
-#define OFDM_TABLE_SIZE_92D			43
-#define CCK_TABLE_LENGTH			33
-
-#define CCK_TABLE_SIZE				33
-
-#define BW_AUTO_SWITCH_HIGH_LOW			25
-#define BW_AUTO_SWITCH_LOW_HIGH			30
-
-#define DM_DIG_FA_UPPER				0x32
-#define DM_DIG_FA_LOWER				0x20
-#define DM_DIG_FA_TH0				0x100
-#define DM_DIG_FA_TH1				0x400
-#define DM_DIG_FA_TH2				0x600
-
-#define RXPATHSELECTION_SS_TH_LOW		30
-#define RXPATHSELECTION_DIFF_TH			18
-
-#define DM_RATR_STA_INIT			0
-#define DM_RATR_STA_HIGH			1
-#define DM_RATR_STA_MIDDLE			2
-#define DM_RATR_STA_LOW				3
-
-#define CTS2SELF_THVAL				30
-#define REGC38_TH				20
-
-#define WAIOTTHVAL				25
-
-#define TXHIGHPWRLEVEL_NORMAL			0
-#define TXHIGHPWRLEVEL_LEVEL1			1
-#define TXHIGHPWRLEVEL_LEVEL2			2
-#define TXHIGHPWRLEVEL_BT1			3
-#define TXHIGHPWRLEVEL_BT2			4
-
-#define DM_TYPE_BYFW				0
-#define DM_TYPE_BYDRIVER			1
-
-#define TX_POWER_NEAR_FIELD_THRESH_LVL2		74
-#define TX_POWER_NEAR_FIELD_THRESH_LVL1		67
-#define INDEX_MAPPING_NUM			13
-
-struct swat {
-	u8 failure_cnt;
-	u8 try_flag;
-	u8 stop_trying;
-	long pre_rssi;
-	long trying_threshold;
-	u8 cur_antenna;
-	u8 pre_antenna;
-};
-
-enum tag_dynamic_init_gain_operation_type_definition {
-	DIG_TYPE_THRESH_HIGH = 0,
-	DIG_TYPE_THRESH_LOW = 1,
-	DIG_TYPE_BACKOFF = 2,
-	DIG_TYPE_RX_GAIN_MIN = 3,
-	DIG_TYPE_RX_GAIN_MAX = 4,
-	DIG_TYPE_ENABLE = 5,
-	DIG_TYPE_DISABLE = 6,
-	DIG_OP_TYPE_MAX
-};
-
-enum dm_1r_cca {
-	CCA_1R = 0,
-	CCA_2R = 1,
-	CCA_MAX = 2,
-};
-
-enum dm_rf {
-	RF_SAVE = 0,
-	RF_NORMAL = 1,
-	RF_MAX = 2,
-};
-
-enum dm_sw_ant_switch {
-	ANS_ANTENNA_B = 1,
-	ANS_ANTENNA_A = 2,
-	ANS_ANTENNA_MAX = 3,
-};
-
-void rtl92d_dm_init(struct ieee80211_hw *hw);
-void rtl92d_dm_watchdog(struct ieee80211_hw *hw);
-void rtl92d_dm_init_edca_turbo(struct ieee80211_hw *hw);
-void rtl92d_dm_write_dig(struct ieee80211_hw *hw);
-void rtl92d_dm_check_txpower_tracking_thermal_meter(struct ieee80211_hw *hw);
-void rtl92d_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw);
+void rtl92de_dm_init(struct ieee80211_hw *hw);
+void rtl92de_dm_watchdog(struct ieee80211_hw *hw);
 
 #endif