Merge v6.12.35linux-rolling-lts

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9 files changed, 54 insertions, 6 deletions

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
index 84ef80ab4afb..96cecc576a98 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
@@ -17,6 +17,8 @@ static const struct usb_device_id mt76x2u_device_table[] = {
 	{ USB_DEVICE(0x057c, 0x8503) },	/* Avm FRITZ!WLAN AC860 */
 	{ USB_DEVICE(0x7392, 0xb711) },	/* Edimax EW 7722 UAC */
 	{ USB_DEVICE(0x0e8d, 0x7632) },	/* HC-M7662BU1 */
+	{ USB_DEVICE(0x0471, 0x2126) }, /* LiteOn WN4516R module, nonstandard USB connector */
+	{ USB_DEVICE(0x0471, 0x7600) }, /* LiteOn WN4519R module, nonstandard USB connector */
 	{ USB_DEVICE(0x2c4e, 0x0103) },	/* Mercury UD13 */
 	{ USB_DEVICE(0x0846, 0x9014) },	/* Netgear WNDA3100v3 */
 	{ USB_DEVICE(0x0846, 0x9053) },	/* Netgear A6210 */
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
index 33a14365ec9b..3b5562811511 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
@@ -191,6 +191,7 @@ int mt76x2u_register_device(struct mt76x02_dev *dev)
 {
 	struct ieee80211_hw *hw = mt76_hw(dev);
 	struct mt76_usb *usb = &dev->mt76.usb;
+	bool vht;
 	int err;
 
 	INIT_DELAYED_WORK(&dev->cal_work, mt76x2u_phy_calibrate);
@@ -217,7 +218,17 @@ int mt76x2u_register_device(struct mt76x02_dev *dev)
 
 	/* check hw sg support in order to enable AMSDU */
 	hw->max_tx_fragments = dev->mt76.usb.sg_en ? MT_TX_SG_MAX_SIZE : 1;
-	err = mt76_register_device(&dev->mt76, true, mt76x02_rates,
+	switch (dev->mt76.rev) {
+	case 0x76320044:
+		/* these ASIC revisions do not support VHT */
+		vht = false;
+		break;
+	default:
+		vht = true;
+		break;
+	}
+
+	err = mt76_register_device(&dev->mt76, vht, mt76x02_rates,
 				   ARRAY_SIZE(mt76x02_rates));
 	if (err)
 		goto fail;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 6a3629f71caa..9c245c23a2d7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -83,6 +83,11 @@ mt7921_init_he_caps(struct mt792x_phy *phy, enum nl80211_band band,
 			he_cap_elem->phy_cap_info[9] |=
 				IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU |
 				IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU;
+
+			if (is_mt7922(phy->mt76->dev)) {
+				he_cap_elem->phy_cap_info[0] |=
+					IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+			}
 			break;
 		case NL80211_IFTYPE_STATION:
 			he_cap_elem->mac_cap_info[1] |=
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/init.c b/drivers/net/wireless/mediatek/mt76/mt7925/init.c
index 039949b344b9..14553dcc61c5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/init.c
@@ -204,6 +204,12 @@ static void mt7925_init_work(struct work_struct *work)
 		return;
 	}
 
+	ret = mt7925_mcu_set_thermal_protect(dev);
+	if (ret) {
+		dev_err(dev->mt76.dev, "thermal protection enable failed\n");
+		return;
+	}
+
 	/* we support chip reset now */
 	dev->hw_init_done = true;
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index a19c108ad4b5..57a1db394dda 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -961,6 +961,23 @@ int mt7925_mcu_set_deep_sleep(struct mt792x_dev *dev, bool enable)
 }
 EXPORT_SYMBOL_GPL(mt7925_mcu_set_deep_sleep);
 
+int mt7925_mcu_set_thermal_protect(struct mt792x_dev *dev)
+{
+	char cmd[64];
+	int ret = 0;
+
+	snprintf(cmd, sizeof(cmd), "ThermalProtGband %d %d %d %d %d %d %d %d %d %d",
+		 0, 100, 90, 80, 30, 1, 1, 115, 105, 5);
+	ret = mt7925_mcu_chip_config(dev, cmd);
+
+	snprintf(cmd, sizeof(cmd), "ThermalProtAband %d %d %d %d %d %d %d %d %d %d",
+		 1, 100, 90, 80, 30, 1, 1, 115, 105, 5);
+	ret |= mt7925_mcu_chip_config(dev, cmd);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mt7925_mcu_set_thermal_protect);
+
 int mt7925_run_firmware(struct mt792x_dev *dev)
 {
 	int err;
@@ -3288,7 +3305,8 @@ int mt7925_mcu_fill_message(struct mt76_dev *mdev, struct sk_buff *skb,
 		else
 			uni_txd->option = MCU_CMD_UNI_EXT_ACK;
 
-		if (cmd == MCU_UNI_CMD(HIF_CTRL))
+		if (cmd == MCU_UNI_CMD(HIF_CTRL) ||
+		    cmd == MCU_UNI_CMD(CHIP_CONFIG))
 			uni_txd->option &= ~MCU_CMD_ACK;
 
 		goto exit;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
index 887427e0760a..780c5921679a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
@@ -635,6 +635,7 @@ int mt7925_mcu_add_bss_info(struct mt792x_phy *phy,
 int mt7925_mcu_set_timing(struct mt792x_phy *phy,
 			  struct ieee80211_bss_conf *link_conf);
 int mt7925_mcu_set_deep_sleep(struct mt792x_dev *dev, bool enable);
+int mt7925_mcu_set_thermal_protect(struct mt792x_dev *dev);
 int mt7925_mcu_set_channel_domain(struct mt76_phy *phy);
 int mt7925_mcu_set_radio_en(struct mt792x_phy *phy, bool enable);
 int mt7925_mcu_set_chctx(struct mt76_phy *phy, struct mt76_vif *mvif,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
index 9aec675450f2..5e428f19f972 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
@@ -482,9 +482,6 @@ static int mt7925_pci_suspend(struct device *device)
 
 	/* disable interrupt */
 	mt76_wr(dev, dev->irq_map->host_irq_enable, 0);
-	mt76_wr(dev, MT_WFDMA0_HOST_INT_DIS,
-		dev->irq_map->tx.all_complete_mask |
-		MT_INT_RX_DONE_ALL | MT_INT_MCU_CMD);
 
 	mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0x0);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/regs.h b/drivers/net/wireless/mediatek/mt76/mt7925/regs.h
index 985794a40c1a..547489092c29 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/regs.h
@@ -28,7 +28,7 @@
 #define MT_MDP_TO_HIF			0
 #define MT_MDP_TO_WM			1
 
-#define MT_WFDMA0_HOST_INT_ENA		MT_WFDMA0(0x228)
+#define MT_WFDMA0_HOST_INT_ENA		MT_WFDMA0(0x204)
 #define MT_WFDMA0_HOST_INT_DIS		MT_WFDMA0(0x22c)
 #define HOST_RX_DONE_INT_ENA4		BIT(12)
 #define HOST_RX_DONE_INT_ENA5		BIT(13)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index ef2d7eaaaffd..0990a3d481f2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -623,6 +623,14 @@ mt7996_mac_fill_rx(struct mt7996_dev *dev, enum mt76_rxq_id q,
 		status->last_amsdu = amsdu_info == MT_RXD4_LAST_AMSDU_FRAME;
 	}
 
+	/* IEEE 802.11 fragmentation can only be applied to unicast frames.
+	 * Hence, drop fragments with multicast/broadcast RA.
+	 * This check fixes vulnerabilities, like CVE-2020-26145.
+	 */
+	if ((ieee80211_has_morefrags(fc) || seq_ctrl & IEEE80211_SCTL_FRAG) &&
+	    FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, rxd3) != MT_RXD3_NORMAL_U2M)
+		return -EINVAL;
+
 	hdr_gap = (u8 *)rxd - skb->data + 2 * remove_pad;
 	if (hdr_trans && ieee80211_has_morefrags(fc)) {
 		if (mt7996_reverse_frag0_hdr_trans(skb, hdr_gap))