Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here we go, another merge window full of networking and #ebpf changes:

   1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
      range without dealing with floods of ARP traffic, from Linus
      Lüssing.

   2) Throttle buffered multicast packet transmission in mt76, from
      Felix Fietkau.

   3) Support adaptive interrupt moderation in ice, from Brett Creeley.

   4) A lot of struct_size conversions, from Gustavo A. R. Silva.

   5) Add peek/push/pop commands to bpftool, as well as bash completion,
      from Stanislav Fomichev.

   6) Optimize sk_msg_clone(), from Vakul Garg.

   7) Add SO_BINDTOIFINDEX, from David Herrmann.

   8) Be more conservative with local resends due to local congestion,
      from Yuchung Cheng.

   9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.

  10) Add health buffer support to devlink, from Eran Ben Elisha.

  11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.

  12) Add statistics to basic packet scheduler filter, from Cong Wang.

  13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.

  14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.

  15) Add 3ad stats to bonding, from Nikolay Aleksandrov.

  16) Lots of probing improvements for bpftool, from Quentin Monnet.

  17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.

  18) Allow #ebpf programs to access gso_segs from skb shared info, from
      Eric Dumazet.

  19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.

  20) Support 22260 iwlwifi devices, from Luca Coelho.

  21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.

  22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.

  23) Add spinlock support to #ebpf, from Alexei Starovoitov.

  24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.

  25) Add device infomation API to devlink, from Jakub Kicinski.

  26) Add new timestamping socket options which are y2038 safe, from
      Deepa Dinamani.

  27) Add RX checksum offloading for various sh_eth chips, from Sergei
      Shtylyov.

  28) Flow offload infrastructure, from Pablo Neira Ayuso.

  29) Numerous cleanups, improvements, and bug fixes to the PHY layer
      and many drivers from Heiner Kallweit.

  30) Lots of changes to try and make packet scheduler classifiers run
      lockless as much as possible, from Vlad Buslov.

  31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.

  32) Add concurrency tests to tc-tests infrastructure, from Vlad
      Buslov.

  33) Add hwmon support to aquantia, from Heiner Kallweit.

  34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.

  And I would be remiss if I didn't thank the various major networking
  subsystem maintainers for integrating much of this work before I even
  saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
  Johannes Berg, Kalle Valo, and many others. Thank you!"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
  net/sched: avoid unused-label warning
  net: ignore sysctl_devconf_inherit_init_net without SYSCTL
  phy: mdio-mux: fix Kconfig dependencies
  net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
  net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
  selftest/net: Remove duplicate header
  sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
  net/mlx5e: Update tx reporter status in case channels were successfully opened
  devlink: Add support for direct reporter health state update
  devlink: Update reporter state to error even if recover aborted
  sctp: call iov_iter_revert() after sending ABORT
  team: Free BPF filter when unregistering netdev
  ip6mr: Do not call __IP6_INC_STATS() from preemptible context
  isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
  net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
  cxgb4/chtls: Prefix adapter flags with CXGB4
  net-sysfs: Switch to bitmap_zalloc()
  mellanox: Switch to bitmap_zalloc()
  bpf: add test cases for non-pointer sanitiation logic
  mlxsw: i2c: Extend initialization by querying resources data
  ...

74 files changed, 1801 insertions, 1344 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3d187cd50eb0..071869db44cf 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -87,6 +87,18 @@ config MDIO_BUS_MUX_MMIOREG
 
 	  Currently, only 8/16/32 bits registers are supported.
 
+config MDIO_BUS_MUX_MULTIPLEXER
+	tristate "MDIO bus multiplexer using kernel multiplexer subsystem"
+	depends on OF_MDIO
+	select MULTIPLEXER
+	select MDIO_BUS_MUX
+	help
+	  This module provides a driver for MDIO bus multiplexer
+	  that is controlled via the kernel multiplexer subsystem. The
+	  bus multiplexer connects one of several child MDIO busses to
+	  a parent bus.  Child bus selection is under the control of
+	  the kernel multiplexer subsystem.
+
 config MDIO_CAVIUM
 	tristate
 
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 5805c0b7d60e..ece5dae67174 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
 obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o
 obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o
 obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o
 obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
@@ -45,6 +46,10 @@ sfp-obj-$(CONFIG_SFP)		+= sfp-bus.o
 obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 
 obj-$(CONFIG_AMD_PHY)		+= amd.o
+aquantia-objs			+= aquantia_main.o
+ifdef CONFIG_HWMON
+aquantia-objs			+= aquantia_hwmon.o
+endif
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
 obj-$(CONFIG_ASIX_PHY)		+= asix.o
 obj-$(CONFIG_AT803X_PHY)	+= at803x.o
diff --git a/drivers/net/phy/amd.c b/drivers/net/phy/amd.c
index 9d0504f3e3b2..65b4b0960b1e 100644
--- a/drivers/net/phy/amd.c
+++ b/drivers/net/phy/amd.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for AMD am79c PHYs
  *
  * Author: Heiko Schocher <hs@denx.de>
  *
  * Copyright (c) 2011 DENX Software Engineering GmbH
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
deleted file mode 100644
index beb3309bb0f0..000000000000
--- a/drivers/net/phy/aquantia.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Driver for Aquantia PHY
- *
- * Author: Shaohui Xie <Shaohui.Xie@freescale.com>
- *
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-#include <linux/mdio.h>
-
-#define PHY_ID_AQ1202	0x03a1b445
-#define PHY_ID_AQ2104	0x03a1b460
-#define PHY_ID_AQR105	0x03a1b4a2
-#define PHY_ID_AQR106	0x03a1b4d0
-#define PHY_ID_AQR107	0x03a1b4e0
-#define PHY_ID_AQR405	0x03a1b4b0
-
-static int aquantia_config_aneg(struct phy_device *phydev)
-{
-	linkmode_copy(phydev->supported, phy_10gbit_features);
-	linkmode_copy(phydev->advertising, phydev->supported);
-
-	return 0;
-}
-
-static int aquantia_config_intr(struct phy_device *phydev)
-{
-	int err;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-		err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 1);
-		if (err < 0)
-			return err;
-
-		err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 1);
-		if (err < 0)
-			return err;
-
-		err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0x1001);
-	} else {
-		err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 0);
-		if (err < 0)
-			return err;
-
-		err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 0);
-		if (err < 0)
-			return err;
-
-		err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0);
-	}
-
-	return err;
-}
-
-static int aquantia_ack_interrupt(struct phy_device *phydev)
-{
-	int reg;
-
-	reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xcc01);
-	return (reg < 0) ? reg : 0;
-}
-
-static int aquantia_read_status(struct phy_device *phydev)
-{
-	int reg;
-
-	reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-	reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-	if (reg & MDIO_STAT1_LSTATUS)
-		phydev->link = 1;
-	else
-		phydev->link = 0;
-
-	reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800);
-	mdelay(10);
-	reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800);
-
-	switch (reg) {
-	case 0x9:
-		phydev->speed = SPEED_2500;
-		break;
-	case 0x5:
-		phydev->speed = SPEED_1000;
-		break;
-	case 0x3:
-		phydev->speed = SPEED_100;
-		break;
-	case 0x7:
-	default:
-		phydev->speed = SPEED_10000;
-		break;
-	}
-	phydev->duplex = DUPLEX_FULL;
-
-	return 0;
-}
-
-static struct phy_driver aquantia_driver[] = {
-{
-	.phy_id		= PHY_ID_AQ1202,
-	.phy_id_mask	= 0xfffffff0,
-	.name		= "Aquantia AQ1202",
-	.features	= PHY_10GBIT_FULL_FEATURES,
-	.aneg_done	= genphy_c45_aneg_done,
-	.config_aneg    = aquantia_config_aneg,
-	.config_intr	= aquantia_config_intr,
-	.ack_interrupt	= aquantia_ack_interrupt,
-	.read_status	= aquantia_read_status,
-},
-{
-	.phy_id		= PHY_ID_AQ2104,
-	.phy_id_mask	= 0xfffffff0,
-	.name		= "Aquantia AQ2104",
-	.features	= PHY_10GBIT_FULL_FEATURES,
-	.aneg_done	= genphy_c45_aneg_done,
-	.config_aneg    = aquantia_config_aneg,
-	.config_intr	= aquantia_config_intr,
-	.ack_interrupt	= aquantia_ack_interrupt,
-	.read_status	= aquantia_read_status,
-},
-{
-	.phy_id		= PHY_ID_AQR105,
-	.phy_id_mask	= 0xfffffff0,
-	.name		= "Aquantia AQR105",
-	.features	= PHY_10GBIT_FULL_FEATURES,
-	.aneg_done	= genphy_c45_aneg_done,
-	.config_aneg    = aquantia_config_aneg,
-	.config_intr	= aquantia_config_intr,
-	.ack_interrupt	= aquantia_ack_interrupt,
-	.read_status	= aquantia_read_status,
-},
-{
-	.phy_id		= PHY_ID_AQR106,
-	.phy_id_mask	= 0xfffffff0,
-	.name		= "Aquantia AQR106",
-	.features	= PHY_10GBIT_FULL_FEATURES,
-	.aneg_done	= genphy_c45_aneg_done,
-	.config_aneg    = aquantia_config_aneg,
-	.config_intr	= aquantia_config_intr,
-	.ack_interrupt	= aquantia_ack_interrupt,
-	.read_status	= aquantia_read_status,
-},
-{
-	.phy_id		= PHY_ID_AQR107,
-	.phy_id_mask	= 0xfffffff0,
-	.name		= "Aquantia AQR107",
-	.features	= PHY_10GBIT_FULL_FEATURES,
-	.aneg_done	= genphy_c45_aneg_done,
-	.config_aneg    = aquantia_config_aneg,
-	.config_intr	= aquantia_config_intr,
-	.ack_interrupt	= aquantia_ack_interrupt,
-	.read_status	= aquantia_read_status,
-},
-{
-	.phy_id		= PHY_ID_AQR405,
-	.phy_id_mask	= 0xfffffff0,
-	.name		= "Aquantia AQR405",
-	.features	= PHY_10GBIT_FULL_FEATURES,
-	.aneg_done	= genphy_c45_aneg_done,
-	.config_aneg    = aquantia_config_aneg,
-	.config_intr	= aquantia_config_intr,
-	.ack_interrupt	= aquantia_ack_interrupt,
-	.read_status	= aquantia_read_status,
-},
-};
-
-module_phy_driver(aquantia_driver);
-
-static struct mdio_device_id __maybe_unused aquantia_tbl[] = {
-	{ PHY_ID_AQ1202, 0xfffffff0 },
-	{ PHY_ID_AQ2104, 0xfffffff0 },
-	{ PHY_ID_AQR105, 0xfffffff0 },
-	{ PHY_ID_AQR106, 0xfffffff0 },
-	{ PHY_ID_AQR107, 0xfffffff0 },
-	{ PHY_ID_AQR405, 0xfffffff0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(mdio, aquantia_tbl);
-
-MODULE_DESCRIPTION("Aquantia PHY driver");
-MODULE_AUTHOR("Shaohui Xie <Shaohui.Xie@freescale.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/aquantia.h b/drivers/net/phy/aquantia.h
new file mode 100644
index 000000000000..5a16caab7b2f
--- /dev/null
+++ b/drivers/net/phy/aquantia.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * HWMON driver for Aquantia PHY
+ *
+ * Author: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
+ * Author: Andrew Lunn <andrew@lunn.ch>
+ * Author: Heiner Kallweit <hkallweit1@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/phy.h>
+
+#if IS_REACHABLE(CONFIG_HWMON)
+int aqr_hwmon_probe(struct phy_device *phydev);
+#else
+static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
+#endif
diff --git a/drivers/net/phy/aquantia_hwmon.c b/drivers/net/phy/aquantia_hwmon.c
new file mode 100644
index 000000000000..19c4c280a6cd
--- /dev/null
+++ b/drivers/net/phy/aquantia_hwmon.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/* HWMON driver for Aquantia PHY
+ *
+ * Author: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
+ * Author: Andrew Lunn <andrew@lunn.ch>
+ * Author: Heiner Kallweit <hkallweit1@gmail.com>
+ */
+
+#include <linux/phy.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/hwmon.h>
+
+#include "aquantia.h"
+
+/* Vendor specific 1, MDIO_MMD_VEND2 */
+#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
+#define VEND1_THERMAL_STAT1			0xc820
+#define VEND1_THERMAL_STAT2			0xc821
+#define VEND1_THERMAL_STAT2_VALID		BIT(0)
+#define VEND1_GENERAL_STAT1			0xc830
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
+
+#if IS_REACHABLE(CONFIG_HWMON)
+
+static umode_t aqr_hwmon_is_visible(const void *data,
+				    enum hwmon_sensor_types type,
+				    u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_min_alarm:
+	case hwmon_temp_max_alarm:
+	case hwmon_temp_lcrit_alarm:
+	case hwmon_temp_crit_alarm:
+		return 0444;
+	case hwmon_temp_min:
+	case hwmon_temp_max:
+	case hwmon_temp_lcrit:
+	case hwmon_temp_crit:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int aqr_hwmon_get(struct phy_device *phydev, int reg, long *value)
+{
+	int temp = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
+
+	if (temp < 0)
+		return temp;
+
+	/* 16 bit value is 2's complement with LSB = 1/256th degree Celsius */
+	*value = (s16)temp * 1000 / 256;
+
+	return 0;
+}
+
+static int aqr_hwmon_set(struct phy_device *phydev, int reg, long value)
+{
+	int temp;
+
+	if (value >= 128000 || value < -128000)
+		return -ERANGE;
+
+	temp = value * 256 / 1000;
+
+	/* temp is in s16 range and we're interested in lower 16 bits only */
+	return phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, (u16)temp);
+}
+
+static int aqr_hwmon_test_bit(struct phy_device *phydev, int reg, int bit)
+{
+	int val = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
+
+	if (val < 0)
+		return val;
+
+	return !!(val & bit);
+}
+
+static int aqr_hwmon_status1(struct phy_device *phydev, int bit, long *value)
+{
+	int val = aqr_hwmon_test_bit(phydev, VEND1_GENERAL_STAT1, bit);
+
+	if (val < 0)
+		return val;
+
+	*value = val;
+
+	return 0;
+}
+
+static int aqr_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			  u32 attr, int channel, long *value)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	int reg;
+
+	if (type != hwmon_temp)
+		return -EOPNOTSUPP;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		reg = aqr_hwmon_test_bit(phydev, VEND1_THERMAL_STAT2,
+					 VEND1_THERMAL_STAT2_VALID);
+		if (reg < 0)
+			return reg;
+		if (!reg)
+			return -EBUSY;
+
+		return aqr_hwmon_get(phydev, VEND1_THERMAL_STAT1, value);
+
+	case hwmon_temp_lcrit:
+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
+				     value);
+	case hwmon_temp_min:
+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
+				     value);
+	case hwmon_temp_max:
+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
+				     value);
+	case hwmon_temp_crit:
+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
+				     value);
+	case hwmon_temp_lcrit_alarm:
+		return aqr_hwmon_status1(phydev,
+					 VEND1_GENERAL_STAT1_LOW_TEMP_FAIL,
+					 value);
+	case hwmon_temp_min_alarm:
+		return aqr_hwmon_status1(phydev,
+					 VEND1_GENERAL_STAT1_LOW_TEMP_WARN,
+					 value);
+	case hwmon_temp_max_alarm:
+		return aqr_hwmon_status1(phydev,
+					 VEND1_GENERAL_STAT1_HIGH_TEMP_WARN,
+					 value);
+	case hwmon_temp_crit_alarm:
+		return aqr_hwmon_status1(phydev,
+					 VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL,
+					 value);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int aqr_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+			   u32 attr, int channel, long value)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+
+	if (type != hwmon_temp)
+		return -EOPNOTSUPP;
+
+	switch (attr) {
+	case hwmon_temp_lcrit:
+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
+				     value);
+	case hwmon_temp_min:
+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
+				     value);
+	case hwmon_temp_max:
+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
+				     value);
+	case hwmon_temp_crit:
+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
+				     value);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops aqr_hwmon_ops = {
+	.is_visible = aqr_hwmon_is_visible,
+	.read = aqr_hwmon_read,
+	.write = aqr_hwmon_write,
+};
+
+static u32 aqr_hwmon_chip_config[] = {
+	HWMON_C_REGISTER_TZ,
+	0,
+};
+
+static const struct hwmon_channel_info aqr_hwmon_chip = {
+	.type = hwmon_chip,
+	.config = aqr_hwmon_chip_config,
+};
+
+static u32 aqr_hwmon_temp_config[] = {
+	HWMON_T_INPUT |
+	HWMON_T_MAX | HWMON_T_MIN |
+	HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM |
+	HWMON_T_CRIT | HWMON_T_LCRIT |
+	HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM,
+	0,
+};
+
+static const struct hwmon_channel_info aqr_hwmon_temp = {
+	.type = hwmon_temp,
+	.config = aqr_hwmon_temp_config,
+};
+
+static const struct hwmon_channel_info *aqr_hwmon_info[] = {
+	&aqr_hwmon_chip,
+	&aqr_hwmon_temp,
+	NULL,
+};
+
+static const struct hwmon_chip_info aqr_hwmon_chip_info = {
+	.ops = &aqr_hwmon_ops,
+	.info = aqr_hwmon_info,
+};
+
+int aqr_hwmon_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device *hwmon_dev;
+	char *hwmon_name;
+	int i, j;
+
+	hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
+	if (!hwmon_name)
+		return -ENOMEM;
+
+	for (i = j = 0; hwmon_name[i]; i++) {
+		if (isalnum(hwmon_name[i])) {
+			if (i != j)
+				hwmon_name[j] = hwmon_name[i];
+			j++;
+		}
+	}
+	hwmon_name[j] = '\0';
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
+					phydev, &aqr_hwmon_chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+#endif
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
new file mode 100644
index 000000000000..37218e5d7cc9
--- /dev/null
+++ b/drivers/net/phy/aquantia_main.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Aquantia PHY
+ *
+ * Author: Shaohui Xie <Shaohui.Xie@freescale.com>
+ *
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/phy.h>
+
+#include "aquantia.h"
+
+#define PHY_ID_AQ1202	0x03a1b445
+#define PHY_ID_AQ2104	0x03a1b460
+#define PHY_ID_AQR105	0x03a1b4a2
+#define PHY_ID_AQR106	0x03a1b4d0
+#define PHY_ID_AQR107	0x03a1b4e0
+#define PHY_ID_AQCS109	0x03a1b5c2
+#define PHY_ID_AQR405	0x03a1b4b0
+
+#define MDIO_AN_VEND_PROV			0xc400
+#define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
+#define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
+
+#define MDIO_AN_TX_VEND_STATUS1			0xc800
+#define MDIO_AN_TX_VEND_STATUS1_10BASET		(0x0 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_100BASETX	(0x1 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_1000BASET	(0x2 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_10GBASET	(0x3 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_2500BASET	(0x4 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_5000BASET	(0x5 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK	(0x7 << 1)
+#define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX	BIT(0)
+
+#define MDIO_AN_TX_VEND_INT_STATUS2		0xcc01
+
+#define MDIO_AN_TX_VEND_INT_MASK2		0xd401
+#define MDIO_AN_TX_VEND_INT_MASK2_LINK		BIT(0)
+
+#define MDIO_AN_RX_LP_STAT1			0xe820
+#define MDIO_AN_RX_LP_STAT1_1000BASET_FULL	BIT(15)
+#define MDIO_AN_RX_LP_STAT1_1000BASET_HALF	BIT(14)
+
+/* Vendor specific 1, MDIO_MMD_VEND1 */
+#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
+#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
+
+#define VEND1_GLOBAL_INT_STD_MASK		0xff00
+#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
+#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
+#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
+#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
+#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
+#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
+
+#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
+#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
+#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
+#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
+#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
+#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
+
+static int aqr_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	u16 reg;
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_pma_setup_forced(phydev);
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	/* Clause 45 has no standardized support for 1000BaseT, therefore
+	 * use vendor registers for this mode.
+	 */
+	reg = 0;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+				     MDIO_AN_VEND_PROV_1000BASET_HALF |
+				     MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int aqr_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = phy_write_mmd(phydev, MDIO_MMD_AN,
+				    MDIO_AN_TX_VEND_INT_MASK2,
+				    MDIO_AN_TX_VEND_INT_MASK2_LINK);
+		if (err < 0)
+			return err;
+
+		err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+				    VEND1_GLOBAL_INT_STD_MASK,
+				    VEND1_GLOBAL_INT_STD_MASK_ALL);
+		if (err < 0)
+			return err;
+
+		err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+				    VEND1_GLOBAL_INT_VEND_MASK,
+				    VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
+				    VEND1_GLOBAL_INT_VEND_MASK_AN);
+	} else {
+		err = phy_write_mmd(phydev, MDIO_MMD_AN,
+				    MDIO_AN_TX_VEND_INT_MASK2, 0);
+		if (err < 0)
+			return err;
+
+		err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+				    VEND1_GLOBAL_INT_STD_MASK, 0);
+		if (err < 0)
+			return err;
+
+		err = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+				    VEND1_GLOBAL_INT_VEND_MASK, 0);
+	}
+
+	return err;
+}
+
+static int aqr_ack_interrupt(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read_mmd(phydev, MDIO_MMD_AN,
+			   MDIO_AN_TX_VEND_INT_STATUS2);
+	return (reg < 0) ? reg : 0;
+}
+
+static int aqr_read_status(struct phy_device *phydev)
+{
+	int val;
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
+		if (val < 0)
+			return val;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				 phydev->lp_advertising,
+				 val & MDIO_AN_RX_LP_STAT1_1000BASET_FULL);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+				 phydev->lp_advertising,
+				 val & MDIO_AN_RX_LP_STAT1_1000BASET_HALF);
+	}
+
+	return genphy_c45_read_status(phydev);
+}
+
+static int aqcs109_config_init(struct phy_device *phydev)
+{
+	/* AQCS109 belongs to a chip family partially supporting 10G and 5G.
+	 * PMA speed ability bits are the same for all members of the family,
+	 * AQCS109 however supports speeds up to 2.5G only.
+	 */
+	return phy_set_max_speed(phydev, SPEED_2500);
+}
+
+static struct phy_driver aqr_driver[] = {
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
+	.name		= "Aquantia AQ1202",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
+	.name		= "Aquantia AQ2104",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
+	.name		= "Aquantia AQR105",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
+	.name		= "Aquantia AQR106",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
+	.name		= "Aquantia AQR107",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.probe		= aqr_hwmon_probe,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
+	.name		= "Aquantia AQCS109",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.probe		= aqr_hwmon_probe,
+	.config_init	= aqcs109_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
+	.name		= "Aquantia AQR405",
+	.aneg_done	= genphy_c45_aneg_done,
+	.get_features	= genphy_c45_pma_read_abilities,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
+};
+
+module_phy_driver(aqr_driver);
+
+static struct mdio_device_id __maybe_unused aqr_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ1202) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ2104) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, aqr_tbl);
+
+MODULE_DESCRIPTION("Aquantia PHY driver");
+MODULE_AUTHOR("Shaohui Xie <Shaohui.Xie@freescale.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f9432d053a22..f3e96191eb6f 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/at803x.c
  *
  * Driver for Atheros 803x PHY
  *
  * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/phy.h>
@@ -39,9 +35,6 @@
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-#define AT803X_MMD_ACCESS_CONTROL		0x0D
-#define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
-#define AT803X_FUNC_DATA			0x4003
 #define AT803X_REG_CHIP_CONFIG			0x1f
 #define AT803X_BT_BX_REG_SEL			0x8000
 
@@ -110,16 +103,28 @@ static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
 	return phy_write(phydev, AT803X_DEBUG_DATA, val);
 }
 
-static inline int at803x_enable_rx_delay(struct phy_device *phydev)
+static int at803x_enable_rx_delay(struct phy_device *phydev)
 {
 	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-					AT803X_DEBUG_RX_CLK_DLY_EN);
+				     AT803X_DEBUG_RX_CLK_DLY_EN);
 }
 
-static inline int at803x_enable_tx_delay(struct phy_device *phydev)
+static int at803x_enable_tx_delay(struct phy_device *phydev)
 {
 	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-					AT803X_DEBUG_TX_CLK_DLY_EN);
+				     AT803X_DEBUG_TX_CLK_DLY_EN);
+}
+
+static int at803x_disable_rx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
+}
+
+static int at803x_disable_tx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
+				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
 }
 
 /* save relevant PHY registers to private copy */
@@ -168,16 +173,9 @@ static int at803x_set_wol(struct phy_device *phydev,
 		if (!is_valid_ether_addr(mac))
 			return -EINVAL;
 
-		for (i = 0; i < 3; i++) {
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-				  AT803X_DEVICE_ADDR);
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
-				  offsets[i]);
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-				  AT803X_FUNC_DATA);
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
-				  mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
-		}
+		for (i = 0; i < 3; i++)
+			phy_write_mmd(phydev, AT803X_DEVICE_ADDR, offsets[i],
+				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
 
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
 		value |= AT803X_INTR_ENABLE_WOL;
@@ -255,21 +253,42 @@ static int at803x_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
-			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+	/* The RX and TX delay default is:
+	 *   after HW reset: RX delay enabled and TX delay disabled
+	 *   after SW reset: RX delay enabled, while TX delay retains the
+	 *   value before reset.
+	 *
+	 * So let's first disable the RX and TX delays in PHY and enable
+	 * them based on the mode selected (this also takes care of RGMII
+	 * mode where we expect delays to be disabled)
+	 */
+
+	ret = at803x_disable_rx_delay(phydev);
+	if (ret < 0)
+		return ret;
+	ret = at803x_disable_tx_delay(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		/* If RGMII_ID or RGMII_RXID are specified enable RX delay,
+		 * otherwise keep it disabled
+		 */
 		ret = at803x_enable_rx_delay(phydev);
 		if (ret < 0)
 			return ret;
 	}
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
-			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		/* If RGMII_ID or RGMII_TXID are specified enable TX delay,
+		 * otherwise keep it disabled
+		 */
 		ret = at803x_enable_tx_delay(phydev);
-		if (ret < 0)
-			return ret;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int at803x_ack_interrupt(struct phy_device *phydev)
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
index e757b09f1889..ab8e12922bf9 100644
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 /* Broadcom Cygnus SoC internal transceivers support. */
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index e10e7b54ec4b..a75642051b8b 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2015-2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #include "bcm-phy-lib.h"
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 81cceaa412fe..17faaefcfd60 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #ifndef _LINUX_BCM_PHY_LIB_H
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index a88dd14a25c0..44e6cff419a0 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	Driver for Broadcom 63xx SOCs integrated PHYs
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
  */
 #include "bcm-phy-lib.h"
 #include <linux/module.h>
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 712224cc442d..b8415f8fae14 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Broadcom BCM7xxx internal transceivers support.
  *
  * Copyright (C) 2014-2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index a271239748f2..f0c0eefe2202 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2011 - 2012 Cavium, Inc.
  */
 
@@ -221,4 +218,4 @@ static struct phy_driver bcm87xx_driver[] = {
 
 module_phy_driver(bcm87xx_driver);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index aa73c5cc5f86..9605d4fe540b 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	drivers/net/phy/broadcom.c
  *
@@ -7,11 +8,6 @@
  *	Copyright (c) 2006  Maciej W. Rozycki
  *
  *	Inspired by code written by Amy Fong.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
  */
 
 #include "bcm-phy-lib.h"
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index fea61c81bda9..108ed24f8489 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/cicada.c
  *
@@ -6,12 +7,6 @@
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
index 1a4d04afb7f0..856cdc36aacd 100644
--- a/drivers/net/phy/cortina.c
+++ b/drivers/net/phy/cortina.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *    Copyright 2017 NXP
  *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
  *    CORTINA is a registered trademark of Cortina Systems, Inc.
  *
  */
@@ -89,10 +80,9 @@ static struct phy_driver cortina_driver[] = {
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Cortina CS4340",
 	.features       = PHY_10GBIT_FEATURES,
-	.config_init	= gen10g_config_init,
 	.config_aneg	= gen10g_config_aneg,
 	.read_status	= cortina_read_status,
-	.soft_reset	= gen10g_no_soft_reset,
+	.soft_reset	= genphy_no_soft_reset,
 	.probe		= cortina_probe,
 },
 };
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 97162008f42b..bf39baa7f2c8 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/davicom.c
  *
@@ -6,12 +7,6 @@
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 6e8807212aa3..2fe2ebaf62d1 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for the National Semiconductor DP83640 PHYTER
  *
  * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 24c7f149f3e6..bbd8c22067f3 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the Texas Instruments DP83822 PHY
  *
  * Copyright (C) 2017 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/ethtool.h>
@@ -338,4 +330,4 @@ MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
 
 MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index a6b55909d1dc..f55dc907c2f3 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the Texas Instruments DP83848 PHY
  *
  * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>
@@ -133,4 +125,4 @@ module_phy_driver(dp83848_driver);
 
 MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
 MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 56fa3606cb9c..8448d01819ef 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the Texas Instruments DP83867 PHY
  *
  * Copyright (C) 2015 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/ethtool.h>
@@ -136,17 +128,13 @@ static int dp83867_config_port_mirroring(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 =
 		(struct dp83867_private *)phydev->priv;
-	u16 val;
-
-	val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
 
 	if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
-		val |= DP83867_CFG4_PORT_MIRROR_EN;
+		phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				 DP83867_CFG4_PORT_MIRROR_EN);
 	else
-		val &= ~DP83867_CFG4_PORT_MIRROR_EN;
-
-	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
-
+		phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				   DP83867_CFG4_PORT_MIRROR_EN);
 	return 0;
 }
 
@@ -231,11 +219,9 @@ static int dp83867_config_init(struct phy_device *phydev)
 	}
 
 	/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
-	if (dp83867->rxctrl_strap_quirk) {
-		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
-		val &= ~BIT(7);
-		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
-	}
+	if (dp83867->rxctrl_strap_quirk)
+		phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				   BIT(7));
 
 	if (phy_interface_is_rgmii(phydev)) {
 		val = phy_read(phydev, MII_DP83867_PHYCTRL);
@@ -284,17 +270,11 @@ static int dp83867_config_init(struct phy_device *phydev)
 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
 			      delay);
 
-		if (dp83867->io_impedance >= 0) {
-			val = phy_read_mmd(phydev, DP83867_DEVADDR,
-					   DP83867_IO_MUX_CFG);
-
-			val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
-			val |= dp83867->io_impedance &
-			       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
-
-			phy_write_mmd(phydev, DP83867_DEVADDR,
-				      DP83867_IO_MUX_CFG, val);
-		}
+		if (dp83867->io_impedance >= 0)
+			phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
+				       dp83867->io_impedance &
+				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
 	}
 
 	/* Enable Interrupt output INT_OE in CFG3 register */
@@ -308,12 +288,11 @@ static int dp83867_config_init(struct phy_device *phydev)
 		dp83867_config_port_mirroring(phydev);
 
 	/* Clock output selection if muxing property is set */
-	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
-		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
-		val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
-		val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
-		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
-	}
+	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK)
+		phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+			       DP83867_IO_MUX_CFG_CLK_O_SEL_MASK,
+			       dp83867->clk_output_sel <<
+			       DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
 
 	return 0;
 }
@@ -360,4 +339,4 @@ MODULE_DEVICE_TABLE(mdio, dp83867_tbl);
 
 MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver");
 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index da13356999e5..e9704af1d239 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -144,11 +144,8 @@ static int dp83811_set_wol(struct phy_device *phydev,
 		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
 			      value);
 	} else {
-		value = phy_read_mmd(phydev, DP83811_DEVADDR,
-				     MII_DP83811_WOL_CFG);
-		value &= ~DP83811_WOL_EN;
-		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
-			      value);
+		phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+				   DP83811_WOL_EN);
 	}
 
 	return 0;
@@ -328,14 +325,10 @@ static int dp83811_suspend(struct phy_device *phydev)
 
 static int dp83811_resume(struct phy_device *phydev)
 {
-	int value;
-
 	genphy_resume(phydev);
 
-	value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
-
-	phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value |
-		      DP83811_WOL_CLR_INDICATION);
+	phy_set_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+			 DP83811_WOL_CLR_INDICATION);
 
 	return 0;
 }
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 565e49e7f76f..2aa367c04a8e 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/et1011c.c
  *
@@ -6,12 +7,6 @@
  * Author: Chaithrika U S
  *
  * Copyright (c) 2008 Texas Instruments
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index 72d43c88e6ff..1acd8bfdb3bc 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
  *
@@ -5,11 +6,6 @@
  *         Anton Vorontsov <avorontsov@ru.mvista.com>
  *
  * Copyright (c) 2006-2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
@@ -22,10 +18,11 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/seqlock.h>
 #include <linux/idr.h>
 #include <linux/netdevice.h>
+#include <linux/linkmode.h>
 
 #include "swphy.h"
 
@@ -42,7 +39,7 @@ struct fixed_phy {
 	bool no_carrier;
 	int (*link_update)(struct net_device *, struct fixed_phy_status *);
 	struct list_head node;
-	int link_gpio;
+	struct gpio_desc *link_gpiod;
 };
 
 static struct platform_device *pdev;
@@ -71,8 +68,8 @@ EXPORT_SYMBOL_GPL(fixed_phy_change_carrier);
 
 static void fixed_phy_update(struct fixed_phy *fp)
 {
-	if (!fp->no_carrier && gpio_is_valid(fp->link_gpio))
-		fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio);
+	if (!fp->no_carrier && fp->link_gpiod)
+		fp->status.link = !!gpiod_get_value_cansleep(fp->link_gpiod);
 }
 
 static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
@@ -89,11 +86,11 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
 				s = read_seqcount_begin(&fp->seqcount);
 				fp->status.link = !fp->no_carrier;
 				/* Issue callback if user registered it. */
-				if (fp->link_update) {
+				if (fp->link_update)
 					fp->link_update(fp->phydev->attached_dev,
 							&fp->status);
-					fixed_phy_update(fp);
-				}
+				/* Check the GPIO for change in status */
+				fixed_phy_update(fp);
 				state = fp->status;
 			} while (read_seqcount_retry(&fp->seqcount, s));
 
@@ -137,9 +134,9 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
 }
 EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
 
-int fixed_phy_add(unsigned int irq, int phy_addr,
-		  struct fixed_phy_status *status,
-		  int link_gpio)
+static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
+			       struct fixed_phy_status *status,
+			       struct gpio_desc *gpiod)
 {
 	int ret;
 	struct fixed_mdio_bus *fmb = &platform_fmb;
@@ -160,24 +157,19 @@ int fixed_phy_add(unsigned int irq, int phy_addr,
 
 	fp->addr = phy_addr;
 	fp->status = *status;
-	fp->link_gpio = link_gpio;
-
-	if (gpio_is_valid(fp->link_gpio)) {
-		ret = gpio_request_one(fp->link_gpio, GPIOF_DIR_IN,
-				       "fixed-link-gpio-link");
-		if (ret)
-			goto err_regs;
-	}
+	fp->link_gpiod = gpiod;
 
 	fixed_phy_update(fp);
 
 	list_add_tail(&fp->node, &fmb->phys);
 
 	return 0;
+}
 
-err_regs:
-	kfree(fp);
-	return ret;
+int fixed_phy_add(unsigned int irq, int phy_addr,
+		  struct fixed_phy_status *status) {
+
+	return fixed_phy_add_gpiod(irq, phy_addr, status, NULL);
 }
 EXPORT_SYMBOL_GPL(fixed_phy_add);
 
@@ -191,8 +183,8 @@ static void fixed_phy_del(int phy_addr)
 	list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
 		if (fp->addr == phy_addr) {
 			list_del(&fp->node);
-			if (gpio_is_valid(fp->link_gpio))
-				gpio_free(fp->link_gpio);
+			if (fp->link_gpiod)
+				gpiod_put(fp->link_gpiod);
 			kfree(fp);
 			ida_simple_remove(&phy_fixed_ida, phy_addr);
 			return;
@@ -200,10 +192,48 @@ static void fixed_phy_del(int phy_addr)
 	}
 }
 
-struct phy_device *fixed_phy_register(unsigned int irq,
-				      struct fixed_phy_status *status,
-				      int link_gpio,
-				      struct device_node *np)
+#ifdef CONFIG_OF_GPIO
+static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
+{
+	struct device_node *fixed_link_node;
+	struct gpio_desc *gpiod;
+
+	if (!np)
+		return NULL;
+
+	fixed_link_node = of_get_child_by_name(np, "fixed-link");
+	if (!fixed_link_node)
+		return NULL;
+
+	/*
+	 * As the fixed link is just a device tree node without any
+	 * Linux device associated with it, we simply have obtain
+	 * the GPIO descriptor from the device tree like this.
+	 */
+	gpiod = gpiod_get_from_of_node(fixed_link_node, "link-gpios", 0,
+				       GPIOD_IN, "mdio");
+	of_node_put(fixed_link_node);
+	if (IS_ERR(gpiod)) {
+		if (PTR_ERR(gpiod) == -EPROBE_DEFER)
+			return gpiod;
+		pr_err("error getting GPIO for fixed link %pOF, proceed without\n",
+		       fixed_link_node);
+		gpiod = NULL;
+	}
+
+	return gpiod;
+}
+#else
+static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
+{
+	return NULL;
+}
+#endif
+
+static struct phy_device *__fixed_phy_register(unsigned int irq,
+					       struct fixed_phy_status *status,
+					       struct device_node *np,
+					       struct gpio_desc *gpiod)
 {
 	struct fixed_mdio_bus *fmb = &platform_fmb;
 	struct phy_device *phy;
@@ -213,12 +243,19 @@ struct phy_device *fixed_phy_register(unsigned int irq,
 	if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED)
 		return ERR_PTR(-EPROBE_DEFER);
 
+	/* Check if we have a GPIO associated with this fixed phy */
+	if (!gpiod) {
+		gpiod = fixed_phy_get_gpiod(np);
+		if (IS_ERR(gpiod))
+			return ERR_CAST(gpiod);
+	}
+
 	/* Get the next available PHY address, up to PHY_MAX_ADDR */
 	phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL);
 	if (phy_addr < 0)
 		return ERR_PTR(phy_addr);
 
-	ret = fixed_phy_add(irq, phy_addr, status, link_gpio);
+	ret = fixed_phy_add_gpiod(irq, phy_addr, status, gpiod);
 	if (ret < 0) {
 		ida_simple_remove(&phy_fixed_ida, phy_addr);
 		return ERR_PTR(ret);
@@ -264,6 +301,8 @@ struct phy_device *fixed_phy_register(unsigned int irq,
 				 phy->supported);
 	}
 
+	linkmode_copy(phy->advertising, phy->supported);
+
 	ret = phy_device_register(phy);
 	if (ret) {
 		phy_device_free(phy);
@@ -274,8 +313,24 @@ struct phy_device *fixed_phy_register(unsigned int irq,
 
 	return phy;
 }
+
+struct phy_device *fixed_phy_register(unsigned int irq,
+				      struct fixed_phy_status *status,
+				      struct device_node *np)
+{
+	return __fixed_phy_register(irq, status, np, NULL);
+}
 EXPORT_SYMBOL_GPL(fixed_phy_register);
 
+struct phy_device *
+fixed_phy_register_with_gpiod(unsigned int irq,
+			      struct fixed_phy_status *status,
+			      struct gpio_desc *gpiod)
+{
+	return __fixed_phy_register(irq, status, NULL, gpiod);
+}
+EXPORT_SYMBOL_GPL(fixed_phy_register_with_gpiod);
+
 void fixed_phy_unregister(struct phy_device *phy)
 {
 	phy_device_remove(phy);
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 7d5938b87660..ebef8354bc81 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for ICPlus PHYs
  *
  * Copyright (c) 2007 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index fc0f5024a29e..02d9713318b6 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
  * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/mdio.h>
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index c8bb29ae1a2a..a93d673baf35 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/lxt.c
  *
@@ -6,12 +7,6 @@
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index abb7876a8776..3ccba37bd6dd 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/marvell.c
  *
@@ -8,12 +9,6 @@
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  *
  * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 6bac602094bd..100b401b1f4a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Marvell 10G 88x3310 PHY driver
  *
@@ -26,7 +27,8 @@
 #include <linux/marvell_phy.h>
 #include <linux/phy.h>
 
-#define MDIO_AN_10GBT_CTRL_ADV_NBT_MASK	0x01e0
+#define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
+#define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
 
 enum {
 	MV_PCS_BASE_T		= 0x0000,
@@ -59,24 +61,6 @@ struct mv3310_priv {
 	char *hwmon_name;
 };
 
-static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
-			 u16 mask, u16 bits)
-{
-	int old, val, ret;
-
-	old = phy_read_mmd(phydev, devad, reg);
-	if (old < 0)
-		return old;
-
-	val = (old & ~mask) | (bits & mask);
-	if (val == old)
-		return 0;
-
-	ret = phy_write_mmd(phydev, devad, reg, val);
-
-	return ret < 0 ? ret : 1;
-}
-
 #ifdef CONFIG_HWMON
 static umode_t mv3310_hwmon_is_visible(const void *data,
 				       enum hwmon_sensor_types type,
@@ -160,10 +144,9 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
 		return ret;
 
 	val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
-	ret = mv3310_modify(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
-			    MV_V2_TEMP_CTRL_MASK, val);
 
-	return ret < 0 ? ret : 0;
+	return phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
+			      MV_V2_TEMP_CTRL_MASK, val);
 }
 
 static void mv3310_hwmon_disable(void *data)
@@ -251,95 +234,58 @@ static int mv3310_resume(struct phy_device *phydev)
 	return mv3310_hwmon_config(phydev, true);
 }
 
-static int mv3310_config_init(struct phy_device *phydev)
+/* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010
+ * don't set bit 14 in PMA Extended Abilities (1.11), although they do
+ * support 2.5GBASET and 5GBASET. For these models, we can still read their
+ * 2.5G/5G extended abilities register (1.21). We detect these models based on
+ * the PMA device identifier, with a mask matching models known to have this
+ * issue
+ */
+static bool mv3310_has_pma_ngbaset_quirk(struct phy_device *phydev)
 {
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
-	int val;
+	if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_PMAPMD))
+		return false;
 
+	/* Only some revisions of the 88X3310 family PMA seem to be impacted */
+	return (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
+		MV_PHY_ALASKA_NBT_QUIRK_MASK) == MV_PHY_ALASKA_NBT_QUIRK_REV;
+}
+
+static int mv3310_config_init(struct phy_device *phydev)
+{
 	/* Check that the PHY interface type is compatible */
 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
 	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
 	    phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
 	    phydev->interface != PHY_INTERFACE_MODE_10GKR)
 		return -ENODEV;
 
-	__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
-	__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
-
-	if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
-		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-		if (val < 0)
-			return val;
+	return 0;
+}
 
-		if (val & MDIO_AN_STAT1_ABLE)
-			__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
-	}
+static int mv3310_get_features(struct phy_device *phydev)
+{
+	int ret, val;
 
-	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
-	if (val < 0)
-		return val;
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret)
+		return ret;
 
-	/* Ethtool does not support the WAN mode bits */
-	if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR |
-		   MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 |
-		   MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW |
-		   MDIO_PMA_STAT2_10GBEW))
-		__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBSR)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBLR)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBER)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported);
-
-	if (val & MDIO_PMA_STAT2_EXTABLE) {
-		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+	if (mv3310_has_pma_ngbaset_quirk(phydev)) {
+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+				   MDIO_PMA_NG_EXTABLE);
 		if (val < 0)
 			return val;
 
-		if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT |
-			   MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT))
-			__set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
-		if (val & MDIO_PMA_EXTABLE_10GBLRM)
-			__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
-		if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR |
-			   MDIO_PMA_EXTABLE_1000BKX))
-			__set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported);
-		if (val & MDIO_PMA_EXTABLE_10GBLRM)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBT)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBKX4)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBKR)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_1000BT)
-			__set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_1000BKX)
-			__set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_100BTX) {
-			__set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				  supported);
-			__set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				  supported);
-		}
-		if (val & MDIO_PMA_EXTABLE_10BT) {
-			__set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
-				  supported);
-			__set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
-				  supported);
-		}
-	}
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_NG_EXTABLE_2_5GBT);
 
-	linkmode_copy(phydev->supported, supported);
-	linkmode_and(phydev->advertising, phydev->advertising,
-		     phydev->supported);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_NG_EXTABLE_5GBT);
+	}
 
 	return 0;
 }
@@ -353,54 +299,27 @@ static int mv3310_config_aneg(struct phy_device *phydev)
 	/* We don't support manual MDI control */
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 
-	if (phydev->autoneg == AUTONEG_DISABLE) {
-		ret = genphy_c45_pma_setup_forced(phydev);
-		if (ret < 0)
-			return ret;
-
-		return genphy_c45_an_disable_aneg(phydev);
-	}
-
-	linkmode_and(phydev->advertising, phydev->advertising,
-		     phydev->supported);
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_pma_setup_forced(phydev);
 
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
-			    ADVERTISE_ALL | ADVERTISE_100BASE4 |
-			    ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-			    linkmode_adv_to_mii_adv_t(phydev->advertising));
+	ret = genphy_c45_an_config_aneg(phydev);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
 		changed = true;
 
+	/* Clause 45 has no standardized support for 1000BaseT, therefore
+	 * use vendor registers for this mode.
+	 */
 	reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
-			    ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
-	if (ret < 0)
-		return ret;
-	if (ret > 0)
-		changed = true;
-
-	/* 10G control register */
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			      phydev->advertising))
-		reg = MDIO_AN_10GBT_CTRL_ADV10G;
-	else
-		reg = 0;
-
-	/* Make sure we clear unsupported 2.5G/5G advertising */
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-			    MDIO_AN_10GBT_CTRL_ADV10G |
-			    MDIO_AN_10GBT_CTRL_ADV_NBT_MASK, reg);
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
+			     ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
 		changed = true;
 
-	if (changed)
-		ret = genphy_c45_restart_aneg(phydev);
-
-	return ret;
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
 }
 
 static int mv3310_aneg_done(struct phy_device *phydev)
@@ -420,18 +339,29 @@ static int mv3310_aneg_done(struct phy_device *phydev)
 static void mv3310_update_interface(struct phy_device *phydev)
 {
 	if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
+	     phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
 	     phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {
 		/* The PHY automatically switches its serdes interface (and
-		 * active PHYXS instance) between Cisco SGMII and 10GBase-KR
-		 * modes according to the speed.  Florian suggests setting
-		 * phydev->interface to communicate this to the MAC. Only do
-		 * this if we are already in either SGMII or 10GBase-KR mode.
+		 * active PHYXS instance) between Cisco SGMII, 10GBase-KR and
+		 * 2500BaseX modes according to the speed.  Florian suggests
+		 * setting phydev->interface to communicate this to the MAC.
+		 * Only do this if we are already in one of the above modes.
 		 */
-		if (phydev->speed == SPEED_10000)
+		switch (phydev->speed) {
+		case SPEED_10000:
 			phydev->interface = PHY_INTERFACE_MODE_10GKR;
-		else if (phydev->speed >= SPEED_10 &&
-			 phydev->speed < SPEED_10000)
+			break;
+		case SPEED_2500:
+			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+			break;
+		case SPEED_1000:
+		case SPEED_100:
+		case SPEED_10:
 			phydev->interface = PHY_INTERFACE_MODE_SGMII;
+			break;
+		default:
+			break;
+		}
 	}
 }
 
@@ -449,16 +379,8 @@ static int mv3310_read_10gbr_status(struct phy_device *phydev)
 
 static int mv3310_read_status(struct phy_device *phydev)
 {
-	u32 mmd_mask = phydev->c45_ids.devices_in_package;
 	int val;
 
-	/* The vendor devads do not report link status.  Avoid the PHYXS
-	 * instance as there are three, and its status depends on the MAC
-	 * being appropriately configured for the negotiated speed.
-	 */
-	mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2) |
-		      BIT(MDIO_MMD_PHYXS));
-
 	phydev->speed = SPEED_UNKNOWN;
 	phydev->duplex = DUPLEX_UNKNOWN;
 	linkmode_zero(phydev->lp_advertising);
@@ -474,12 +396,10 @@ static int mv3310_read_status(struct phy_device *phydev)
 	if (val & MDIO_STAT1_LSTATUS)
 		return mv3310_read_10gbr_status(phydev);
 
-	val = genphy_c45_read_link(phydev, mmd_mask);
+	val = genphy_c45_read_link(phydev);
 	if (val < 0)
 		return val;
 
-	phydev->link = val > 0 ? 1 : 0;
-
 	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
 	if (val < 0)
 		return val;
@@ -535,11 +455,11 @@ static int mv3310_read_status(struct phy_device *phydev)
 
 static struct phy_driver mv3310_drivers[] = {
 	{
-		.phy_id		= 0x002b09aa,
+		.phy_id		= MARVELL_PHY_ID_88X3310,
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
-		.features	= PHY_10GBIT_FEATURES,
-		.soft_reset	= gen10g_no_soft_reset,
+		.get_features	= mv3310_get_features,
+		.soft_reset	= genphy_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.probe		= mv3310_probe,
 		.suspend	= mv3310_suspend,
@@ -548,12 +468,25 @@ static struct phy_driver mv3310_drivers[] = {
 		.aneg_done	= mv3310_aneg_done,
 		.read_status	= mv3310_read_status,
 	},
+	{
+		.phy_id		= MARVELL_PHY_ID_88E2110,
+		.phy_id_mask	= MARVELL_PHY_ID_MASK,
+		.name		= "mv88x2110",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.probe		= mv3310_probe,
+		.soft_reset	= genphy_no_soft_reset,
+		.config_init	= mv3310_config_init,
+		.config_aneg	= mv3310_config_aneg,
+		.aneg_done	= mv3310_aneg_done,
+		.read_status	= mv3310_read_status,
+	},
 };
 
 module_phy_driver(mv3310_drivers);
 
 static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
-	{ 0x002b09aa, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
 	{ },
 };
 MODULE_DEVICE_TABLE(mdio, mv3310_tbl);
diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c
index 46fe1ae919a3..7d0f388d8db8 100644
--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index df75efa96a7d..8295bc7c8c20 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Broadcom UniMAC MDIO bus controller driver
  *
  * Copyright (C) 2014-2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index 15352f987bdf..5136275c8e73 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Bitbanged MDIO support.
  *
@@ -11,10 +12,6 @@
  *
  * 2005 (c) MontaVista Software, Inc.
  * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/module.h>
@@ -232,4 +229,4 @@ void free_mdio_bitbang(struct mii_bus *bus)
 }
 EXPORT_SYMBOL(free_mdio_bitbang);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-boardinfo.c b/drivers/net/phy/mdio-boardinfo.c
index 863496fa5d13..d9b54c67ef9f 100644
--- a/drivers/net/phy/mdio-boardinfo.c
+++ b/drivers/net/phy/mdio-boardinfo.c
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * mdio-boardinfo - Collect pre-declarations for MDIO devices
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/net/phy/mdio-cavium.c b/drivers/net/phy/mdio-cavium.c
index 6df2fa755bb4..1afd6fc1a351 100644
--- a/drivers/net/phy/mdio-cavium.c
+++ b/drivers/net/phy/mdio-cavium.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2009-2016 Cavium, Inc.
  */
 
@@ -150,4 +147,4 @@ EXPORT_SYMBOL(cavium_mdiobus_write);
 
 MODULE_DESCRIPTION("Common code for OCTEON and Thunder MDIO bus drivers");
 MODULE_AUTHOR("David Daney");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-cavium.h b/drivers/net/phy/mdio-cavium.h
index 4bccd45d24e2..ed5f9bb5448d 100644
--- a/drivers/net/phy/mdio-cavium.h
+++ b/drivers/net/phy/mdio-cavium.h
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2009-2016 Cavium, Inc.
  */
 
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index ea9a0e339778..1b00235d7dc5 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * GPIO based MDIO bitbang driver.
  * Supports OpenFirmware.
@@ -14,10 +15,6 @@
  *
  * 2005 (c) MontaVista Software, Inc.
  * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/module.h>
@@ -216,5 +213,5 @@ module_platform_driver(mdio_gpio_driver);
 
 MODULE_ALIAS("platform:mdio-gpio");
 MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Generic driver for MDIO bus emulation using GPIO");
diff --git a/drivers/net/phy/mdio-i2c.c b/drivers/net/phy/mdio-i2c.c
index 6d24fd13ca86..0dce67672548 100644
--- a/drivers/net/phy/mdio-i2c.c
+++ b/drivers/net/phy/mdio-i2c.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MDIO I2C bridge
  *
  * Copyright (C) 2015-2016 Russell King
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Network PHYs can appear on I2C buses when they are part of SFP module.
  * This driver exposes these PHYs to the networking PHY code, allowing
  * our PHY drivers access to these PHYs, and so allowing configuration
diff --git a/drivers/net/phy/mdio-i2c.h b/drivers/net/phy/mdio-i2c.h
index 889ab57d7f3e..751dab281f57 100644
--- a/drivers/net/phy/mdio-i2c.h
+++ b/drivers/net/phy/mdio-i2c.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MDIO I2C bridge
  *
  * Copyright (C) 2015 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef MDIO_I2C_H
 #define MDIO_I2C_H
diff --git a/drivers/net/phy/mdio-moxart.c b/drivers/net/phy/mdio-moxart.c
index 5bb56d126693..af3910fe8ec7 100644
--- a/drivers/net/phy/mdio-moxart.c
+++ b/drivers/net/phy/mdio-moxart.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /* MOXA ART Ethernet (RTL8201CP) MDIO interface driver
  *
  * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/delay.h>
@@ -190,4 +187,4 @@ module_platform_driver(moxart_mdio_driver);
 
 MODULE_DESCRIPTION("MOXA ART MDIO interface driver");
 MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index 696bdf1e4576..88d409e48c1f 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation (the "GPL").
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License version 2 (GPLv2) for more details.
- *
- * You should have received a copy of the GNU General Public License
- * version 2 (GPLv2) along with this source code.
  */
 #include <linux/clk.h>
 #include <linux/platform_device.h>
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index fe34576262bd..6c8960df43b0 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2011, 2012 Cavium, Inc.
  */
 
@@ -103,4 +100,4 @@ module_platform_driver(mdio_mux_gpio_driver);
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR("David Daney");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c
index 70f6115530af..d1a8780e24d8 100644
--- a/drivers/net/phy/mdio-mux-mmioreg.c
+++ b/drivers/net/phy/mdio-mux-mmioreg.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Simple memory-mapped device MDIO MUX driver
  *
  * Author: Timur Tabi <timur@freescale.com>
  *
  * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/platform_device.h>
diff --git a/drivers/net/phy/mdio-mux-multiplexer.c b/drivers/net/phy/mdio-mux-multiplexer.c
new file mode 100644
index 000000000000..d6564381aa3e
--- /dev/null
+++ b/drivers/net/phy/mdio-mux-multiplexer.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* MDIO bus multiplexer using kernel multiplexer subsystem
+ *
+ * Copyright 2019 NXP
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mdio-mux.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+
+struct mdio_mux_multiplexer_state {
+	struct mux_control *muxc;
+	bool do_deselect;
+	void *mux_handle;
+};
+
+/**
+ * mdio_mux_multiplexer_switch_fn - This function is called by the mdio-mux
+ *                                  layer when it thinks the mdio bus
+ *                                  multiplexer needs to switch.
+ * @current_child:  current value of the mux register.
+ * @desired_child: value of the 'reg' property of the target child MDIO node.
+ * @data: Private data used by this switch_fn passed to mdio_mux_init function
+ *        via mdio_mux_init(.., .., .., .., data, ..).
+ *
+ * The first time this function is called, current_child == -1.
+ * If current_child == desired_child, then the mux is already set to the
+ * correct bus.
+ */
+static int mdio_mux_multiplexer_switch_fn(int current_child, int desired_child,
+					  void *data)
+{
+	struct platform_device *pdev;
+	struct mdio_mux_multiplexer_state *s;
+	int ret = 0;
+
+	pdev = (struct platform_device *)data;
+	s = platform_get_drvdata(pdev);
+
+	if (!(current_child ^ desired_child))
+		return 0;
+
+	if (s->do_deselect)
+		ret = mux_control_deselect(s->muxc);
+	if (ret) {
+		dev_err(&pdev->dev, "mux_control_deselect failed in %s: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret =  mux_control_select(s->muxc, desired_child);
+	if (!ret) {
+		dev_dbg(&pdev->dev, "%s %d -> %d\n", __func__, current_child,
+			desired_child);
+		s->do_deselect = true;
+	} else {
+		s->do_deselect = false;
+	}
+
+	return ret;
+}
+
+static int mdio_mux_multiplexer_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mdio_mux_multiplexer_state *s;
+	int ret = 0;
+
+	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	s->muxc = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(s->muxc)) {
+		ret = PTR_ERR(s->muxc);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get mux: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, s);
+
+	ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node,
+			    mdio_mux_multiplexer_switch_fn, &s->mux_handle,
+			    pdev, NULL);
+
+	return ret;
+}
+
+static int mdio_mux_multiplexer_remove(struct platform_device *pdev)
+{
+	struct mdio_mux_multiplexer_state *s = platform_get_drvdata(pdev);
+
+	mdio_mux_uninit(s->mux_handle);
+
+	if (s->do_deselect)
+		mux_control_deselect(s->muxc);
+
+	return 0;
+}
+
+static const struct of_device_id mdio_mux_multiplexer_match[] = {
+	{ .compatible = "mdio-mux-multiplexer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_multiplexer_match);
+
+static struct platform_driver mdio_mux_multiplexer_driver = {
+	.driver = {
+		.name		= "mdio-mux-multiplexer",
+		.of_match_table	= mdio_mux_multiplexer_match,
+	},
+	.probe		= mdio_mux_multiplexer_probe,
+	.remove		= mdio_mux_multiplexer_remove,
+};
+
+module_platform_driver(mdio_mux_multiplexer_driver);
+
+MODULE_DESCRIPTION("MDIO bus multiplexer using kernel multiplexer subsystem");
+MODULE_AUTHOR("Pankaj Bansal <pankaj.bansal@nxp.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 0a86f1e4c02f..6a1d3540210b 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2011, 2012 Cavium, Inc.
  */
 
@@ -210,4 +207,4 @@ EXPORT_SYMBOL_GPL(mdio_mux_uninit);
 
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_AUTHOR("David Daney");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index ab6914f8bd50..8327382aa568 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2009-2015 Cavium, Inc.
  */
 
@@ -122,4 +119,4 @@ module_platform_driver(octeon_mdiobus_driver);
 
 MODULE_DESCRIPTION("Cavium OCTEON MDIO bus driver");
 MODULE_AUTHOR("David Daney");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c
index 6425ce04d3f9..20ffd8fb79ce 100644
--- a/drivers/net/phy/mdio-sun4i.c
+++ b/drivers/net/phy/mdio-sun4i.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Allwinner EMAC MDIO interface driver
  *
@@ -6,10 +7,6 @@
  *
  * Based on the Linux driver provided by Allwinner:
  * Copyright (C) 1997  Sten Wang
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/delay.h>
@@ -179,4 +176,4 @@ module_platform_driver(sun4i_mdio_driver);
 
 MODULE_DESCRIPTION("Allwinner EMAC MDIO interface driver");
 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c
index 1546f6398831..b6128ae7f14f 100644
--- a/drivers/net/phy/mdio-thunder.c
+++ b/drivers/net/phy/mdio-thunder.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Copyright (C) 2009-2016 Cavium, Inc.
  */
 
@@ -151,4 +148,4 @@ static struct pci_driver thunder_mdiobus_driver = {
 module_pci_driver(thunder_mdiobus_driver);
 
 MODULE_DESCRIPTION("Cavium ThunderX MDIO bus driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c
index 07c6048200c6..717cc2a056e8 100644
--- a/drivers/net/phy/mdio-xgene.c
+++ b/drivers/net/phy/mdio-xgene.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Applied Micro X-Gene SoC MDIO Driver
  *
  * Copyright (c) 2016, Applied Micro Circuits Corporation
  * Author: Iyappan Subramanian <isubramanian@apm.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/acpi.h>
diff --git a/drivers/net/phy/mdio-xgene.h b/drivers/net/phy/mdio-xgene.h
index 3c85f3e30baa..b1f5ccb4ad9c 100644
--- a/drivers/net/phy/mdio-xgene.h
+++ b/drivers/net/phy/mdio-xgene.h
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Applied Micro X-Gene SoC MDIO Driver
  *
  * Copyright (c) 2016, Applied Micro Circuits Corporation
  * Author: Iyappan Subramanian <isubramanian@apm.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #ifndef __MDIO_XGENE_H__
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7368616286ae..4be4cc09eb90 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* MDIO Bus interface
  *
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -39,8 +34,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/irq.h>
-
 #define CREATE_TRACE_POINTS
 #include <trace/events/mdio.h>
 
@@ -55,11 +48,12 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 		gpiod = fwnode_get_named_gpiod(&mdiodev->dev.of_node->fwnode,
 					       "reset-gpios", 0, GPIOD_OUT_LOW,
 					       "PHY reset");
-	if (PTR_ERR(gpiod) == -ENOENT ||
-	    PTR_ERR(gpiod) == -ENOSYS)
-		gpiod = NULL;
-	else if (IS_ERR(gpiod))
-		return PTR_ERR(gpiod);
+	if (IS_ERR(gpiod)) {
+		if (PTR_ERR(gpiod) == -ENOENT || PTR_ERR(gpiod) == -ENOSYS)
+			gpiod = NULL;
+		else
+			return PTR_ERR(gpiod);
+	}
 
 	mdiodev->reset = gpiod;
 
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index c924700cf37b..887076292e50 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -1,12 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Framework for MDIO devices, other than PHYs.
  *
  * Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index 3ddaf9595697..a238388eb1a5 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -1,20 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Amlogic Meson GXL Internal PHY Driver
  *
  * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
  * Copyright (C) 2016 BayLibre, SAS. All rights reserved.
  * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index b7df0295a3ca..352da24f1f33 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/micrel.c
  *
@@ -8,11 +9,6 @@
  * Copyright (c) 2010-2013 Micrel, Inc.
  * Copyright (c) 2014 Johan Hovold <johan@kernel.org>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  * Support : Micrel Phys:
  *		Giga phys: ksz9021, ksz9031, ksz9131
  *		100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
@@ -437,9 +433,6 @@ static int ksz9021_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-#define MII_KSZ9031RN_MMD_CTRL_REG	0x0d
-#define MII_KSZ9031RN_MMD_REGDATA_REG	0x0e
-#define OP_DATA				1
 #define KSZ9031_PS_TO_REG		60
 
 /* Extended registers */
@@ -457,24 +450,6 @@ static int ksz9021_config_init(struct phy_device *phydev)
 #define MII_KSZ9031RN_EDPD		0x23
 #define MII_KSZ9031RN_EDPD_ENABLE	BIT(0)
 
-static int ksz9031_extended_write(struct phy_device *phydev,
-				  u8 mode, u32 dev_addr, u32 regnum, u16 val)
-{
-	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
-	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
-	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
-	return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
-}
-
-static int ksz9031_extended_read(struct phy_device *phydev,
-				 u8 mode, u32 dev_addr, u32 regnum)
-{
-	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
-	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
-	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
-	return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
-}
-
 static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 				       const struct device_node *of_node,
 				       u16 reg, size_t field_sz,
@@ -495,7 +470,7 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 		return 0;
 
 	if (matches < numfields)
-		newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+		newval = phy_read_mmd(phydev, 2, reg);
 	else
 		newval = 0;
 
@@ -509,7 +484,7 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 					<< (field_sz * i));
 		}
 
-	return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+	return phy_write_mmd(phydev, 2, reg, newval);
 }
 
 /* Center KSZ9031RNX FLP timing at 16ms. */
@@ -517,13 +492,13 @@ static int ksz9031_center_flp_timing(struct phy_device *phydev)
 {
 	int result;
 
-	result = ksz9031_extended_write(phydev, OP_DATA, 0,
-					MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006);
+	result = phy_write_mmd(phydev, 0, MII_KSZ9031RN_FLP_BURST_TX_HI,
+			       0x0006);
 	if (result)
 		return result;
 
-	result = ksz9031_extended_write(phydev, OP_DATA, 0,
-					MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80);
+	result = phy_write_mmd(phydev, 0, MII_KSZ9031RN_FLP_BURST_TX_LO,
+			       0x1A80);
 	if (result)
 		return result;
 
@@ -535,11 +510,11 @@ static int ksz9031_enable_edpd(struct phy_device *phydev)
 {
 	int reg;
 
-	reg = ksz9031_extended_read(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD);
+	reg = phy_read_mmd(phydev, 0x1C, MII_KSZ9031RN_EDPD);
 	if (reg < 0)
 		return reg;
-	return ksz9031_extended_write(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD,
-				      reg | MII_KSZ9031RN_EDPD_ENABLE);
+	return phy_write_mmd(phydev, 0x1C, MII_KSZ9031RN_EDPD,
+			     reg | MII_KSZ9031RN_EDPD_ENABLE);
 }
 
 static int ksz9031_config_init(struct phy_device *phydev)
@@ -665,7 +640,7 @@ static int ksz9131_of_load_skew_values(struct phy_device *phydev,
 		return 0;
 
 	if (matches < numfields)
-		newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+		newval = phy_read_mmd(phydev, 2, reg);
 	else
 		newval = 0;
 
@@ -679,7 +654,7 @@ static int ksz9131_of_load_skew_values(struct phy_device *phydev,
 					<< (field_sz * i));
 		}
 
-	return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+	return phy_write_mmd(phydev, 2, reg, newval);
 }
 
 static int ksz9131_config_init(struct phy_device *phydev)
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 7557bebd5d7f..c6cbb3aa8ae0 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Microchip Technology
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 3949fe299b18..db50efb30df5 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Driver for Microsemi VSC85xx PHYs
  *
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 139bed2c8ab4..42282a86b680 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/national.c
  *
@@ -7,12 +8,6 @@
  * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
  *
  * Copyright (c) 2008 STMicroelectronics Limited
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 03af927fa5ad..9e24d9569424 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -47,6 +47,16 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
 		/* Assume 1000base-T */
 		ctrl2 |= MDIO_PMA_CTRL2_1000BT;
 		break;
+	case SPEED_2500:
+		ctrl1 |= MDIO_CTRL1_SPEED2_5G;
+		/* Assume 2.5Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_2_5GBT;
+		break;
+	case SPEED_5000:
+		ctrl1 |= MDIO_CTRL1_SPEED5G;
+		/* Assume 5Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_5GBT;
+		break;
 	case SPEED_10000:
 		ctrl1 |= MDIO_CTRL1_SPEED10G;
 		/* Assume 10Gbase-T */
@@ -60,11 +70,60 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	return phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2);
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2);
+	if (ret < 0)
+		return ret;
+
+	return genphy_c45_an_disable_aneg(phydev);
 }
 EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
 
 /**
+ * genphy_c45_an_config_aneg - configure advertisement registers
+ * @phydev: target phy_device struct
+ *
+ * Configure advertisement registers based on modes set in phydev->advertising
+ *
+ * Returns negative errno code on failure, 0 if advertisement didn't change,
+ * or 1 if advertised modes changed.
+ */
+int genphy_c45_an_config_aneg(struct phy_device *phydev)
+{
+	int changed, ret;
+	u32 adv;
+
+	linkmode_and(phydev->advertising, phydev->advertising,
+		     phydev->supported);
+
+	changed = genphy_config_eee_advert(phydev);
+
+	adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+				     ADVERTISE_ALL | ADVERTISE_100BASE4 |
+				     ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
+				     adv);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = 1;
+
+	adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				     MDIO_AN_10GBT_CTRL_ADV10G |
+				     MDIO_AN_10GBT_CTRL_ADV5G |
+				     MDIO_AN_10GBT_CTRL_ADV2_5G, adv);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = 1;
+
+	return changed;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg);
+
+/**
  * genphy_c45_an_disable_aneg - disable auto-negotiation
  * @phydev: target phy_device struct
  *
@@ -75,15 +134,9 @@ EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
  */
 int genphy_c45_an_disable_aneg(struct phy_device *phydev)
 {
-	int val;
 
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-	if (val < 0)
-		return val;
-
-	val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
-
-	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				  MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
 }
 EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
 
@@ -97,17 +150,40 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
  */
 int genphy_c45_restart_aneg(struct phy_device *phydev)
 {
-	int val;
+	return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
 
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-	if (val < 0)
-		return val;
+/**
+ * genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation
+ * @phydev: target phy_device struct
+ * @restart: whether aneg restart is requested
+ *
+ * This assumes that the auto-negotiation MMD is present.
+ *
+ * Check, and restart auto-negotiation if needed.
+ */
+int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
+{
+	int ret = 0;
+
+	if (!restart) {
+		/* Configure and restart aneg if it wasn't set before */
+		ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+		if (ret < 0)
+			return ret;
 
-	val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
+		if (!(ret & MDIO_AN_CTRL1_ENABLE))
+			restart = true;
+	}
+
+	if (restart)
+		ret = genphy_c45_restart_aneg(phydev);
 
-	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
+EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
 
 /**
  * genphy_c45_aneg_done - return auto-negotiation complete status
@@ -131,25 +207,33 @@ EXPORT_SYMBOL_GPL(genphy_c45_aneg_done);
 /**
  * genphy_c45_read_link - read the overall link status from the MMDs
  * @phydev: target phy_device struct
- * @mmd_mask: MMDs to read status from
  *
  * Read the link status from the specified MMDs, and if they all indicate
- * that the link is up, return positive.  If an error is encountered,
+ * that the link is up, set phydev->link to 1.  If an error is encountered,
  * a negative errno will be returned, otherwise zero.
  */
-int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask)
+int genphy_c45_read_link(struct phy_device *phydev)
 {
+	u32 mmd_mask = MDIO_DEVS_PMAPMD;
 	int val, devad;
 	bool link = true;
 
-	while (mmd_mask) {
+	while (mmd_mask && link) {
 		devad = __ffs(mmd_mask);
 		mmd_mask &= ~BIT(devad);
 
 		/* The link state is latched low so that momentary link
-		 * drops can be detected.  Do not double-read the status
-		 * register if the link is down.
+		 * drops can be detected. Do not double-read the status
+		 * in polling mode to detect such short link drops.
 		 */
+		if (!phy_polling_mode(phydev)) {
+			val = phy_read_mmd(phydev, devad, MDIO_STAT1);
+			if (val < 0)
+				return val;
+			else if (val & MDIO_STAT1_LSTATUS)
+				continue;
+		}
+
 		val = phy_read_mmd(phydev, devad, MDIO_STAT1);
 		if (val < 0)
 			return val;
@@ -158,7 +242,9 @@ int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask)
 			link = false;
 	}
 
-	return link;
+	phydev->link = link;
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(genphy_c45_read_link);
 
@@ -181,7 +267,7 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
 	if (val < 0)
 		return val;
 
-	mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, val);
+	mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, val);
 	phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
 	phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
 
@@ -190,9 +276,7 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
 	if (val < 0)
 		return val;
 
-	if (val & MDIO_AN_10GBT_STAT_LP10G)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-				 phydev->lp_advertising);
+	mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, val);
 
 	return 0;
 }
@@ -220,6 +304,12 @@ int genphy_c45_read_pma(struct phy_device *phydev)
 	case MDIO_PMA_CTRL1_SPEED1000:
 		phydev->speed = SPEED_1000;
 		break;
+	case MDIO_CTRL1_SPEED2_5G:
+		phydev->speed = SPEED_2500;
+		break;
+	case MDIO_CTRL1_SPEED5G:
+		phydev->speed = SPEED_5000;
+		break;
 	case MDIO_CTRL1_SPEED10G:
 		phydev->speed = SPEED_10000;
 		break;
@@ -267,75 +357,162 @@ int genphy_c45_read_mdix(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
 
-/* The gen10g_* functions are the old Clause 45 stub */
-
-int gen10g_config_aneg(struct phy_device *phydev)
+/**
+ * genphy_c45_pma_read_abilities - read supported link modes from PMA
+ * @phydev: target phy_device struct
+ *
+ * Read the supported link modes from the PMA Status 2 (1.8) register. If bit
+ * 1.8.9 is set, the list of supported modes is build using the values in the
+ * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related
+ * modes. If bit 1.11.14 is set, then the list is also extended with the modes
+ * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and
+ * 5GBASET are supported.
+ */
+int genphy_c45_pma_read_abilities(struct phy_device *phydev)
 {
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gen10g_config_aneg);
+	int val;
 
-int gen10g_read_status(struct phy_device *phydev)
-{
-	u32 mmd_mask = phydev->c45_ids.devices_in_package;
-	int ret;
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+	if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+		if (val < 0)
+			return val;
 
-	/* For now just lie and say it's 10G all the time */
-	phydev->speed = SPEED_10000;
-	phydev->duplex = DUPLEX_FULL;
+		if (val & MDIO_AN_STAT1_ABLE)
+			linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+					 phydev->supported);
+	}
 
-	/* Avoid reading the vendor MMDs */
-	mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2));
+	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
+	if (val < 0)
+		return val;
 
-	ret = genphy_c45_read_link(phydev, mmd_mask);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBSR);
 
-	phydev->link = ret > 0 ? 1 : 0;
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBLR);
 
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gen10g_read_status);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBER);
+
+	if (val & MDIO_PMA_STAT2_EXTABLE) {
+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+		if (val < 0)
+			return val;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBLRM);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBKX4);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBKR);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_1000BT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_1000BKX);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_100BTX);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_100BTX);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10BT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10BT);
+
+		if (val & MDIO_PMA_EXTABLE_NBT) {
+			val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+					   MDIO_PMA_NG_EXTABLE);
+			if (val < 0)
+				return val;
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+					 phydev->supported,
+					 val & MDIO_PMA_NG_EXTABLE_2_5GBT);
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+					 phydev->supported,
+					 val & MDIO_PMA_NG_EXTABLE_5GBT);
+		}
+	}
 
-int gen10g_no_soft_reset(struct phy_device *phydev)
-{
-	/* Do nothing for now */
 	return 0;
 }
-EXPORT_SYMBOL_GPL(gen10g_no_soft_reset);
+EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
 
-int gen10g_config_init(struct phy_device *phydev)
+/**
+ * genphy_c45_read_status - read PHY status
+ * @phydev: target phy_device struct
+ *
+ * Reads status from PHY and sets phy_device members accordingly.
+ */
+int genphy_c45_read_status(struct phy_device *phydev)
 {
-	/* Temporarily just say we support everything */
-	linkmode_zero(phydev->supported);
+	int ret;
 
-	linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			 phydev->supported);
-	linkmode_copy(phydev->advertising, phydev->supported);
+	ret = genphy_c45_read_link(phydev);
+	if (ret)
+		return ret;
 
-	return 0;
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		ret = genphy_c45_read_lpa(phydev);
+		if (ret)
+			return ret;
+
+		phy_resolve_aneg_linkmode(phydev);
+	} else {
+		ret = genphy_c45_read_pma(phydev);
+	}
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(gen10g_config_init);
+EXPORT_SYMBOL_GPL(genphy_c45_read_status);
 
-int gen10g_suspend(struct phy_device *phydev)
+/* The gen10g_* functions are the old Clause 45 stub */
+
+int gen10g_config_aneg(struct phy_device *phydev)
 {
 	return 0;
 }
-EXPORT_SYMBOL_GPL(gen10g_suspend);
+EXPORT_SYMBOL_GPL(gen10g_config_aneg);
 
-int gen10g_resume(struct phy_device *phydev)
+static int gen10g_read_status(struct phy_device *phydev)
 {
-	return 0;
+	/* For now just lie and say it's 10G all the time */
+	phydev->speed = SPEED_10000;
+	phydev->duplex = DUPLEX_FULL;
+
+	return genphy_c45_read_link(phydev);
 }
-EXPORT_SYMBOL_GPL(gen10g_resume);
 
 struct phy_driver genphy_10g_driver = {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
 	.name           = "Generic 10G PHY",
-	.soft_reset	= gen10g_no_soft_reset,
-	.config_init    = gen10g_config_init,
+	.soft_reset	= genphy_no_soft_reset,
 	.features       = PHY_10GBIT_FEATURES,
 	.config_aneg    = gen10g_config_aneg,
 	.read_status    = gen10g_read_status,
-	.suspend        = gen10g_suspend,
-	.resume         = gen10g_resume,
 };
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 20fbd5eb56fd..5016cd5fd7c7 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Core PHY library, taken from phy.c
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 #include <linux/export.h>
 #include <linux/phy.h>
+#include <linux/of.h>
 
 const char *phy_speed_to_str(int speed)
 {
@@ -342,6 +339,77 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
 	return count;
 }
 
+static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
+{
+	const struct phy_setting *p;
+	int i;
+
+	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+		if (p->speed > max_speed)
+			linkmode_clear_bit(p->bit, phydev->supported);
+		else
+			break;
+	}
+
+	return 0;
+}
+
+int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
+{
+	int err;
+
+	err = __set_phy_supported(phydev, max_speed);
+	if (err)
+		return err;
+
+	linkmode_copy(phydev->advertising, phydev->supported);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_set_max_speed);
+
+void of_set_phy_supported(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 max_speed;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (!of_property_read_u32(node, "max-speed", &max_speed))
+		__set_phy_supported(phydev, max_speed);
+}
+
+void of_set_phy_eee_broken(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 broken = 0;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (of_property_read_bool(node, "eee-broken-100tx"))
+		broken |= MDIO_EEE_100TX;
+	if (of_property_read_bool(node, "eee-broken-1000t"))
+		broken |= MDIO_EEE_1000T;
+	if (of_property_read_bool(node, "eee-broken-10gt"))
+		broken |= MDIO_EEE_10GT;
+	if (of_property_read_bool(node, "eee-broken-1000kx"))
+		broken |= MDIO_EEE_1000KX;
+	if (of_property_read_bool(node, "eee-broken-10gkx4"))
+		broken |= MDIO_EEE_10GKX4;
+	if (of_property_read_bool(node, "eee-broken-10gkr"))
+		broken |= MDIO_EEE_10GKR;
+
+	phydev->eee_broken_modes = broken;
+}
+
 /**
  * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
  * @phydev: The phy_device struct
@@ -353,45 +421,16 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
 void phy_resolve_aneg_linkmode(struct phy_device *phydev)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
+	int i;
 
 	linkmode_and(common, phydev->lp_advertising, phydev->advertising);
 
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, common)) {
-		phydev->speed = SPEED_10000;
-		phydev->duplex = DUPLEX_FULL;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
-				     common)) {
-		phydev->speed = SPEED_5000;
-		phydev->duplex = DUPLEX_FULL;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-				     common)) {
-		phydev->speed = SPEED_2500;
-		phydev->duplex = DUPLEX_FULL;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				     common)) {
-		phydev->speed = SPEED_1000;
-		phydev->duplex = DUPLEX_FULL;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-				     common)) {
-		phydev->speed = SPEED_1000;
-		phydev->duplex = DUPLEX_HALF;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				     common)) {
-		phydev->speed = SPEED_100;
-		phydev->duplex = DUPLEX_FULL;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				     common)) {
-		phydev->speed = SPEED_100;
-		phydev->duplex = DUPLEX_HALF;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
-				     common)) {
-		phydev->speed = SPEED_10;
-		phydev->duplex = DUPLEX_FULL;
-	} else if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
-				     common)) {
-		phydev->speed = SPEED_10;
-		phydev->duplex = DUPLEX_HALF;
-	}
+	for (i = 0; i < ARRAY_SIZE(settings); i++)
+		if (test_bit(settings[i].bit, common)) {
+			phydev->speed = settings[i].speed;
+			phydev->duplex = settings[i].duplex;
+			break;
+		}
 
 	if (phydev->duplex == DUPLEX_FULL) {
 		phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
@@ -418,15 +457,15 @@ static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
 }
 
 /**
- * phy_read_mmd - Convenience function for reading a register
+ * __phy_read_mmd - Convenience function for reading a register
  * from an MMD on a given PHY.
  * @phydev: The phy_device struct
  * @devad: The MMD to read from (0..31)
  * @regnum: The register on the MMD to read (0..65535)
  *
- * Same rules as for phy_read();
+ * Same rules as for __phy_read();
  */
-int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
 {
 	int val;
 
@@ -438,33 +477,52 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
 	} else if (phydev->is_c45) {
 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
 
-		val = mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
+		val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
 	} else {
 		struct mii_bus *bus = phydev->mdio.bus;
 		int phy_addr = phydev->mdio.addr;
 
-		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, phy_addr, devad, regnum);
 
 		/* Read the content of the MMD's selected register */
 		val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
-		mutex_unlock(&bus->mdio_lock);
 	}
 	return val;
 }
+EXPORT_SYMBOL(__phy_read_mmd);
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for phy_read();
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_read_mmd(phydev, devad, regnum);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL(phy_read_mmd);
 
 /**
- * phy_write_mmd - Convenience function for writing a register
+ * __phy_write_mmd - Convenience function for writing a register
  * on an MMD on a given PHY.
  * @phydev: The phy_device struct
  * @devad: The MMD to read from
  * @regnum: The register on the MMD to read
  * @val: value to write to @regnum
  *
- * Same rules as for phy_write();
+ * Same rules as for __phy_write();
  */
-int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
 {
 	int ret;
 
@@ -476,27 +534,47 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
 	} else if (phydev->is_c45) {
 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
 
-		ret = mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
-				    addr, val);
+		ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
+				      addr, val);
 	} else {
 		struct mii_bus *bus = phydev->mdio.bus;
 		int phy_addr = phydev->mdio.addr;
 
-		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, phy_addr, devad, regnum);
 
 		/* Write the data into MMD's selected register */
 		__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
-		mutex_unlock(&bus->mdio_lock);
 
 		ret = 0;
 	}
 	return ret;
 }
+EXPORT_SYMBOL(__phy_write_mmd);
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for phy_write();
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_write_mmd(phydev, devad, regnum, val);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL(phy_write_mmd);
 
 /**
- * __phy_modify() - Convenience function for modifying a PHY register
+ * __phy_modify_changed() - Convenience function for modifying a PHY register
  * @phydev: a pointer to a &struct phy_device
  * @regnum: register number
  * @mask: bit mask of bits to clear
@@ -504,16 +582,69 @@ EXPORT_SYMBOL(phy_write_mmd);
  *
  * Unlocked helper function which allows a PHY register to be modified as
  * new register value = (old register value & ~mask) | set
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
  */
-int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
+			 u16 set)
 {
-	int ret;
+	int new, ret;
 
 	ret = __phy_read(phydev, regnum);
 	if (ret < 0)
 		return ret;
 
-	ret = __phy_write(phydev, regnum, (ret & ~mask) | set);
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	ret = __phy_write(phydev, regnum, new);
+
+	return ret < 0 ? ret : 1;
+}
+EXPORT_SYMBOL_GPL(__phy_modify_changed);
+
+/**
+ * phy_modify_changed - Function for modifying a PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_modify_changed(phydev, regnum, mask, set);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_changed);
+
+/**
+ * __phy_modify - Convenience function for modifying a PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+{
+	int ret;
+
+	ret = __phy_modify_changed(phydev, regnum, mask, set);
 
 	return ret < 0 ? ret : 0;
 }
@@ -542,6 +673,113 @@ int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
 }
 EXPORT_SYMBOL_GPL(phy_modify);
 
+/**
+ * __phy_modify_mmd_changed - Function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * Unlocked helper function which allows a MMD register to be modified as
+ * new register value = (old register value & ~mask) | set
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
+			     u16 mask, u16 set)
+{
+	int new, ret;
+
+	ret = __phy_read_mmd(phydev, devad, regnum);
+	if (ret < 0)
+		return ret;
+
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	ret = __phy_write_mmd(phydev, devad, regnum, new);
+
+	return ret < 0 ? ret : 1;
+}
+EXPORT_SYMBOL_GPL(__phy_modify_mmd_changed);
+
+/**
+ * phy_modify_mmd_changed - Function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
+			   u16 mask, u16 set)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_mmd_changed);
+
+/**
+ * __phy_modify_mmd - Convenience function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		     u16 mask, u16 set)
+{
+	int ret;
+
+	ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL_GPL(__phy_modify_mmd);
+
+/**
+ * phy_modify_mmd - Convenience function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		   u16 mask, u16 set)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_mmd);
+
 static int __phy_read_page(struct phy_device *phydev)
 {
 	return phydev->drv->read_page(phydev);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c5675df5fc6f..3745220c5c98 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Framework for configuring and reading PHY devices
  * Based on code in sungem_phy.c and gianfar_phy.c
  *
@@ -5,16 +6,8 @@
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  * Copyright (c) 2006, 2007  Maciej W. Rozycki
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/errno.h>
@@ -36,8 +29,6 @@
 #include <linux/uaccess.h>
 #include <linux/atomic.h>
 
-#include <asm/irq.h>
-
 #define PHY_STATE_STR(_state)			\
 	case PHY_##_state:			\
 		return __stringify(_state);	\
@@ -51,7 +42,6 @@ static const char *phy_state_to_str(enum phy_state st)
 	PHY_STATE_STR(RUNNING)
 	PHY_STATE_STR(NOLINK)
 	PHY_STATE_STR(FORCING)
-	PHY_STATE_STR(CHANGELINK)
 	PHY_STATE_STR(HALTED)
 	PHY_STATE_STR(RESUMING)
 	}
@@ -154,14 +144,10 @@ int phy_aneg_done(struct phy_device *phydev)
 {
 	if (phydev->drv && phydev->drv->aneg_done)
 		return phydev->drv->aneg_done(phydev);
-
-	/* Avoid genphy_aneg_done() if the Clause 45 PHY does not
-	 * implement Clause 22 registers
-	 */
-	if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
-		return -EINVAL;
-
-	return genphy_aneg_done(phydev);
+	else if (phydev->is_c45)
+		return genphy_c45_aneg_done(phydev);
+	else
+		return genphy_aneg_done(phydev);
 }
 EXPORT_SYMBOL(phy_aneg_done);
 
@@ -792,46 +778,27 @@ static int phy_enable_interrupts(struct phy_device *phydev)
 }
 
 /**
- * phy_start_interrupts - request and enable interrupts for a PHY device
+ * phy_request_interrupt - request interrupt for a PHY device
  * @phydev: target phy_device struct
  *
  * Description: Request the interrupt for the given PHY.
  *   If this fails, then we set irq to PHY_POLL.
- *   Otherwise, we enable the interrupts in the PHY.
  *   This should only be called with a valid IRQ number.
- *   Returns 0 on success or < 0 on error.
  */
-int phy_start_interrupts(struct phy_device *phydev)
+void phy_request_interrupt(struct phy_device *phydev)
 {
-	if (request_threaded_irq(phydev->irq, NULL, phy_interrupt,
-				 IRQF_ONESHOT | IRQF_SHARED,
-				 phydev_name(phydev), phydev) < 0) {
-		pr_warn("%s: Can't get IRQ %d (PHY)\n",
-			phydev->mdio.bus->name, phydev->irq);
+	int err;
+
+	err = request_threaded_irq(phydev->irq, NULL, phy_interrupt,
+				   IRQF_ONESHOT | IRQF_SHARED,
+				   phydev_name(phydev), phydev);
+	if (err) {
+		phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n",
+			    err, phydev->irq);
 		phydev->irq = PHY_POLL;
-		return 0;
 	}
-
-	return phy_enable_interrupts(phydev);
-}
-EXPORT_SYMBOL(phy_start_interrupts);
-
-/**
- * phy_stop_interrupts - disable interrupts from a PHY device
- * @phydev: target phy_device struct
- */
-int phy_stop_interrupts(struct phy_device *phydev)
-{
-	int err = phy_disable_interrupts(phydev);
-
-	if (err)
-		phy_error(phydev);
-
-	free_irq(phydev->irq, phydev);
-
-	return err;
 }
-EXPORT_SYMBOL(phy_stop_interrupts);
+EXPORT_SYMBOL(phy_request_interrupt);
 
 /**
  * phy_stop - Bring down the PHY link, and stop checking the status
@@ -855,6 +822,7 @@ void phy_stop(struct phy_device *phydev)
 	mutex_unlock(&phydev->lock);
 
 	phy_state_machine(&phydev->state_queue.work);
+	phy_stop_machine(phydev);
 
 	/* Cannot call flush_scheduled_work() here as desired because
 	 * of rtnl_lock(), but PHY_HALTED shall guarantee irq handler
@@ -875,33 +843,34 @@ EXPORT_SYMBOL(phy_stop);
  */
 void phy_start(struct phy_device *phydev)
 {
-	int err = 0;
+	int err;
 
 	mutex_lock(&phydev->lock);
 
-	switch (phydev->state) {
-	case PHY_READY:
-		phydev->state = PHY_UP;
-		break;
-	case PHY_HALTED:
-		/* if phy was suspended, bring the physical link up again */
-		__phy_resume(phydev);
+	if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) {
+		WARN(1, "called from state %s\n",
+		     phy_state_to_str(phydev->state));
+		goto out;
+	}
 
-		/* make sure interrupts are re-enabled for the PHY */
-		if (phy_interrupt_is_valid(phydev)) {
-			err = phy_enable_interrupts(phydev);
-			if (err < 0)
-				break;
-		}
+	/* if phy was suspended, bring the physical link up again */
+	__phy_resume(phydev);
 
-		phydev->state = PHY_RESUMING;
-		break;
-	default:
-		break;
+	/* make sure interrupts are enabled for the PHY */
+	if (phy_interrupt_is_valid(phydev)) {
+		err = phy_enable_interrupts(phydev);
+		if (err < 0)
+			goto out;
 	}
-	mutex_unlock(&phydev->lock);
 
-	phy_trigger_machine(phydev);
+	if (phydev->state == PHY_READY)
+		phydev->state = PHY_UP;
+	else
+		phydev->state = PHY_RESUMING;
+
+	phy_start_machine(phydev);
+out:
+	mutex_unlock(&phydev->lock);
 }
 EXPORT_SYMBOL(phy_start);
 
@@ -935,7 +904,6 @@ void phy_state_machine(struct work_struct *work)
 		break;
 	case PHY_NOLINK:
 	case PHY_RUNNING:
-	case PHY_CHANGELINK:
 	case PHY_RESUMING:
 		err = phy_check_link_status(phydev);
 		break;
@@ -1086,17 +1054,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 		if (!phy_check_valid(phydev->speed, phydev->duplex, common))
 			goto eee_exit_err;
 
-		if (clk_stop_enable) {
+		if (clk_stop_enable)
 			/* Configure the PHY to stop receiving xMII
 			 * clock while it is signaling LPI.
 			 */
-			int val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
-			if (val < 0)
-				return val;
-
-			val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
-			phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, val);
-		}
+			phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
+					 MDIO_PCS_CTRL1_CLKSTOP_EN);
 
 		return 0; /* EEE supported */
 	}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 46c86725a693..49fdd1ee798e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Framework for finding and configuring PHYs.
  * Also contains generic PHY driver
  *
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -35,9 +30,6 @@
 #include <linux/mdio.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <linux/of.h>
-
-#include <asm/irq.h>
 
 MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
@@ -560,12 +552,33 @@ static const struct device_type mdio_bus_phy_type = {
 	.pm = MDIO_BUS_PHY_PM_OPS,
 };
 
+static int phy_request_driver_module(struct phy_device *dev, int phy_id)
+{
+	int ret;
+
+	ret = request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT,
+			     MDIO_ID_ARGS(phy_id));
+	/* We only check for failures in executing the usermode binary,
+	 * not whether a PHY driver module exists for the PHY ID.
+	 * Accept -ENOENT because this may occur in case no initramfs exists,
+	 * then modprobe isn't available.
+	 */
+	if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) {
+		phydev_err(dev, "error %d loading PHY driver module for ID 0x%08x\n",
+			   ret, phy_id);
+		return ret;
+	}
+
+	return 0;
+}
+
 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids)
 {
 	struct phy_device *dev;
 	struct mdio_device *mdiodev;
+	int ret = 0;
 
 	/* We allocate the device, and initialize the default values */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
@@ -622,15 +635,21 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 			if (!(c45_ids->devices_in_package & (1 << i)))
 				continue;
 
-			request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT,
-				       MDIO_ID_ARGS(c45_ids->device_ids[i]));
+			ret = phy_request_driver_module(dev,
+						c45_ids->device_ids[i]);
+			if (ret)
+				break;
 		}
 	} else {
-		request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT,
-			       MDIO_ID_ARGS(phy_id));
+		ret = phy_request_driver_module(dev, phy_id);
 	}
 
-	device_initialize(&mdiodev->dev);
+	if (!ret) {
+		device_initialize(&mdiodev->dev);
+	} else {
+		kfree(dev);
+		dev = ERR_PTR(ret);
+	}
 
 	return dev;
 }
@@ -656,13 +675,16 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
 	phy_reg = mdiobus_read(bus, addr, reg_addr);
 	if (phy_reg < 0)
 		return -EIO;
-	*devices_in_package = (phy_reg & 0xffff) << 16;
+	*devices_in_package = phy_reg << 16;
 
 	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1;
 	phy_reg = mdiobus_read(bus, addr, reg_addr);
 	if (phy_reg < 0)
 		return -EIO;
-	*devices_in_package |= (phy_reg & 0xffff);
+	*devices_in_package |= phy_reg;
+
+	/* Bit 0 doesn't represent a device, it indicates c22 regs presence */
+	*devices_in_package &= ~BIT(0);
 
 	return 0;
 }
@@ -723,13 +745,13 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 		phy_reg = mdiobus_read(bus, addr, reg_addr);
 		if (phy_reg < 0)
 			return -EIO;
-		c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16;
+		c45_ids->device_ids[i] = phy_reg << 16;
 
 		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
 		phy_reg = mdiobus_read(bus, addr, reg_addr);
 		if (phy_reg < 0)
 			return -EIO;
-		c45_ids->device_ids[i] |= (phy_reg & 0xffff);
+		c45_ids->device_ids[i] |= phy_reg;
 	}
 	*phy_id = 0;
 	return 0;
@@ -762,25 +784,18 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 	/* Grab the bits from PHYIR1, and put them in the upper half */
 	phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
 	if (phy_reg < 0) {
-		/* if there is no device, return without an error so scanning
-		 * the bus works properly
-		 */
-		if (phy_reg == -EIO || phy_reg == -ENODEV) {
-			*phy_id = 0xffffffff;
-			return 0;
-		}
-
-		return -EIO;
+		/* returning -ENODEV doesn't stop bus scanning */
+		return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
 	}
 
-	*phy_id = (phy_reg & 0xffff) << 16;
+	*phy_id = phy_reg << 16;
 
 	/* Grab the bits from PHYIR2, and put them in the lower half */
 	phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
 	if (phy_reg < 0)
 		return -EIO;
 
-	*phy_id |= (phy_reg & 0xffff);
+	*phy_id |= phy_reg;
 
 	return 0;
 }
@@ -831,13 +846,13 @@ int phy_device_register(struct phy_device *phydev)
 	/* Run all of the fixups for this PHY */
 	err = phy_scan_fixups(phydev);
 	if (err) {
-		pr_err("PHY %d failed to initialize\n", phydev->mdio.addr);
+		phydev_err(phydev, "failed to initialize\n");
 		goto out;
 	}
 
 	err = device_add(&phydev->mdio.dev);
 	if (err) {
-		pr_err("PHY %d failed to add\n", phydev->mdio.addr);
+		phydev_err(phydev, "failed to add\n");
 		goto out;
 	}
 
@@ -938,9 +953,8 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 		return rc;
 
 	phy_prepare_link(phydev, handler);
-	phy_start_machine(phydev);
-	if (phydev->irq > 0)
-		phy_start_interrupts(phydev);
+	if (phy_interrupt_is_valid(phydev))
+		phy_request_interrupt(phydev);
 
 	return 0;
 }
@@ -995,10 +1009,11 @@ EXPORT_SYMBOL(phy_connect);
  */
 void phy_disconnect(struct phy_device *phydev)
 {
-	if (phydev->irq > 0)
-		phy_stop_interrupts(phydev);
+	if (phy_is_started(phydev))
+		phy_stop(phydev);
 
-	phy_stop_machine(phydev);
+	if (phy_interrupt_is_valid(phydev))
+		free_irq(phydev->irq, phydev);
 
 	phydev->adjust_link = NULL;
 
@@ -1053,7 +1068,7 @@ int phy_init_hw(struct phy_device *phydev)
 	/* Deassert the reset signal */
 	phy_device_reset(phydev, 0);
 
-	if (!phydev->drv || !phydev->drv->config_init)
+	if (!phydev->drv)
 		return 0;
 
 	if (phydev->drv->soft_reset)
@@ -1066,7 +1081,10 @@ int phy_init_hw(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	return phydev->drv->config_init(phydev);
+	if (phydev->drv->config_init)
+		ret = phydev->drv->config_init(phydev);
+
+	return ret;
 }
 EXPORT_SYMBOL(phy_init_hw);
 
@@ -1291,6 +1309,36 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 }
 EXPORT_SYMBOL(phy_attach);
 
+static bool phy_driver_is_genphy_kind(struct phy_device *phydev,
+				      struct device_driver *driver)
+{
+	struct device *d = &phydev->mdio.dev;
+	bool ret = false;
+
+	if (!phydev->drv)
+		return ret;
+
+	get_device(d);
+	ret = d->driver == driver;
+	put_device(d);
+
+	return ret;
+}
+
+bool phy_driver_is_genphy(struct phy_device *phydev)
+{
+	return phy_driver_is_genphy_kind(phydev,
+					 &genphy_driver.mdiodrv.driver);
+}
+EXPORT_SYMBOL_GPL(phy_driver_is_genphy);
+
+bool phy_driver_is_genphy_10g(struct phy_device *phydev)
+{
+	return phy_driver_is_genphy_kind(phydev,
+					 &genphy_10g_driver.mdiodrv.driver);
+}
+EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
+
 /**
  * phy_detach - detach a PHY device from its network device
  * @phydev: target phy_device struct
@@ -1322,8 +1370,8 @@ void phy_detach(struct phy_device *phydev)
 	 * from the generic driver so that there's a chance a
 	 * real driver could be loaded
 	 */
-	if (phydev->mdio.dev.driver == &genphy_10g_driver.mdiodrv.driver ||
-	    phydev->mdio.dev.driver == &genphy_driver.mdiodrv.driver)
+	if (phy_driver_is_genphy(phydev) ||
+	    phy_driver_is_genphy_10g(phydev))
 		device_release_driver(&phydev->mdio.dev);
 
 	/*
@@ -1467,7 +1515,7 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable);
 static int genphy_config_advert(struct phy_device *phydev)
 {
 	u32 advertise;
-	int oldadv, adv, bmsr;
+	int bmsr, adv;
 	int err, changed = 0;
 
 	/* Only allow advertising what this PHY supports */
@@ -1480,22 +1528,14 @@ static int genphy_config_advert(struct phy_device *phydev)
 			    phydev->advertising);
 
 	/* Setup standard advertisement */
-	adv = phy_read(phydev, MII_ADVERTISE);
-	if (adv < 0)
-		return adv;
-
-	oldadv = adv;
-	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
-		 ADVERTISE_PAUSE_ASYM);
-	adv |= ethtool_adv_to_mii_adv_t(advertise);
-
-	if (adv != oldadv) {
-		err = phy_write(phydev, MII_ADVERTISE, adv);
-
-		if (err < 0)
-			return err;
+	err = phy_modify_changed(phydev, MII_ADVERTISE,
+				 ADVERTISE_ALL | ADVERTISE_100BASE4 |
+				 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
+				 ethtool_adv_to_mii_adv_t(advertise));
+	if (err < 0)
+		return err;
+	if (err > 0)
 		changed = 1;
-	}
 
 	bmsr = phy_read(phydev, MII_BMSR);
 	if (bmsr < 0)
@@ -1509,25 +1549,20 @@ static int genphy_config_advert(struct phy_device *phydev)
 		return changed;
 
 	/* Configure gigabit if it's supported */
-	adv = phy_read(phydev, MII_CTRL1000);
-	if (adv < 0)
-		return adv;
-
-	oldadv = adv;
-	adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
-
+	adv = 0;
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
 			      phydev->supported) ||
 	    linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
 			      phydev->supported))
-		adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
-
-	if (adv != oldadv)
-		changed = 1;
+		adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
 
-	err = phy_write(phydev, MII_CTRL1000, adv);
+	err = phy_modify_changed(phydev, MII_CTRL1000,
+				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
+				 adv);
 	if (err < 0)
 		return err;
+	if (err > 0)
+		changed = 1;
 
 	return changed;
 }
@@ -1540,34 +1575,20 @@ static int genphy_config_advert(struct phy_device *phydev)
  *   efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
  *   changed, and 1 if it has changed.
  */
-static int genphy_config_eee_advert(struct phy_device *phydev)
+int genphy_config_eee_advert(struct phy_device *phydev)
 {
-	int broken = phydev->eee_broken_modes;
-	int old_adv, adv;
+	int err;
 
 	/* Nothing to disable */
-	if (!broken)
+	if (!phydev->eee_broken_modes)
 		return 0;
 
-	/* If the following call fails, we assume that EEE is not
-	 * supported by the phy. If we read 0, EEE is not advertised
-	 * In both case, we don't need to continue
-	 */
-	adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-	if (adv <= 0)
-		return 0;
-
-	old_adv = adv;
-	adv &= ~broken;
-
-	/* Advertising remains unchanged with the broken mask */
-	if (old_adv == adv)
-		return 0;
-
-	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
-
-	return 1;
+	err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+				     phydev->eee_broken_modes, 0);
+	/* If the call failed, we assume that EEE is not supported */
+	return err < 0 ? 0 : err;
 }
+EXPORT_SYMBOL(genphy_config_eee_advert);
 
 /**
  * genphy_setup_forced - configures/forces speed/duplex from @phydev
@@ -1683,10 +1704,19 @@ int genphy_update_link(struct phy_device *phydev)
 {
 	int status;
 
-	/* Do a fake read */
-	status = phy_read(phydev, MII_BMSR);
-	if (status < 0)
-		return status;
+	/* The link state is latched low so that momentary link
+	 * drops can be detected. Do not double-read the status
+	 * in polling mode to detect such short link drops.
+	 */
+	if (!phy_polling_mode(phydev)) {
+		status = phy_read(phydev, MII_BMSR);
+		if (status < 0) {
+			return status;
+		} else if (status & BMSR_LSTATUS) {
+			phydev->link = 1;
+			return 0;
+		}
+	}
 
 	/* Read link and autonegotiation status */
 	status = phy_read(phydev, MII_BMSR);
@@ -1717,8 +1747,6 @@ int genphy_read_status(struct phy_device *phydev)
 	int err;
 	int lpa;
 	int lpagb = 0;
-	int common_adv;
-	int common_adv_gb = 0;
 
 	/* Update the link, but return if there was an error */
 	err = genphy_update_link(phydev);
@@ -1750,7 +1778,6 @@ int genphy_read_status(struct phy_device *phydev)
 
 			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
 							lpagb);
-			common_adv_gb = lpagb & adv << 2;
 		}
 
 		lpa = phy_read(phydev, MII_LPA);
@@ -1759,35 +1786,12 @@ int genphy_read_status(struct phy_device *phydev)
 
 		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
 
-		adv = phy_read(phydev, MII_ADVERTISE);
-		if (adv < 0)
-			return adv;
-
-		common_adv = lpa & adv;
-
-		phydev->speed = SPEED_10;
-		phydev->duplex = DUPLEX_HALF;
+		phydev->speed = SPEED_UNKNOWN;
+		phydev->duplex = DUPLEX_UNKNOWN;
 		phydev->pause = 0;
 		phydev->asym_pause = 0;
 
-		if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) {
-			phydev->speed = SPEED_1000;
-
-			if (common_adv_gb & LPA_1000FULL)
-				phydev->duplex = DUPLEX_FULL;
-		} else if (common_adv & (LPA_100FULL | LPA_100HALF)) {
-			phydev->speed = SPEED_100;
-
-			if (common_adv & LPA_100FULL)
-				phydev->duplex = DUPLEX_FULL;
-		} else
-			if (common_adv & LPA_10FULL)
-				phydev->duplex = DUPLEX_FULL;
-
-		if (phydev->duplex == DUPLEX_FULL) {
-			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
-			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
-		}
+		phy_resolve_aneg_linkmode(phydev);
 	} else {
 		int bmcr = phy_read(phydev, MII_BMCR);
 
@@ -1919,44 +1923,6 @@ int genphy_loopback(struct phy_device *phydev, bool enable)
 }
 EXPORT_SYMBOL(genphy_loopback);
 
-static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
-{
-	switch (max_speed) {
-	case SPEED_10:
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				   phydev->supported);
-		/* fall through */
-	case SPEED_100:
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				   phydev->supported);
-		break;
-	case SPEED_1000:
-		break;
-	default:
-		return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
-int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
-{
-	int err;
-
-	err = __set_phy_supported(phydev, max_speed);
-	if (err)
-		return err;
-
-	linkmode_copy(phydev->advertising, phydev->supported);
-
-	return 0;
-}
-EXPORT_SYMBOL(phy_set_max_speed);
-
 /**
  * phy_remove_link_mode - Remove a supported link mode
  * @phydev: phy_device structure to remove link mode from
@@ -2087,48 +2053,6 @@ bool phy_validate_pause(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_validate_pause);
 
-static void of_set_phy_supported(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	u32 max_speed;
-
-	if (!IS_ENABLED(CONFIG_OF_MDIO))
-		return;
-
-	if (!node)
-		return;
-
-	if (!of_property_read_u32(node, "max-speed", &max_speed))
-		__set_phy_supported(phydev, max_speed);
-}
-
-static void of_set_phy_eee_broken(struct phy_device *phydev)
-{
-	struct device_node *node = phydev->mdio.dev.of_node;
-	u32 broken = 0;
-
-	if (!IS_ENABLED(CONFIG_OF_MDIO))
-		return;
-
-	if (!node)
-		return;
-
-	if (of_property_read_bool(node, "eee-broken-100tx"))
-		broken |= MDIO_EEE_100TX;
-	if (of_property_read_bool(node, "eee-broken-1000t"))
-		broken |= MDIO_EEE_1000T;
-	if (of_property_read_bool(node, "eee-broken-10gt"))
-		broken |= MDIO_EEE_10GT;
-	if (of_property_read_bool(node, "eee-broken-1000kx"))
-		broken |= MDIO_EEE_1000KX;
-	if (of_property_read_bool(node, "eee-broken-10gkx4"))
-		broken |= MDIO_EEE_10GKX4;
-	if (of_property_read_bool(node, "eee-broken-10gkr"))
-		broken |= MDIO_EEE_10GKR;
-
-	phydev->eee_broken_modes = broken;
-}
-
 static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 {
 	return phydrv->config_intr && phydrv->ack_interrupt;
@@ -2162,11 +2086,30 @@ static int phy_probe(struct device *dev)
 
 	mutex_lock(&phydev->lock);
 
+	if (phydev->drv->probe) {
+		/* Deassert the reset signal */
+		phy_device_reset(phydev, 0);
+
+		err = phydev->drv->probe(phydev);
+		if (err) {
+			/* Assert the reset signal */
+			phy_device_reset(phydev, 1);
+			goto out;
+		}
+	}
+
 	/* Start out supporting everything. Eventually,
 	 * a controller will attach, and may modify one
 	 * or both of these values
 	 */
-	linkmode_copy(phydev->supported, phydrv->features);
+	if (phydrv->features) {
+		linkmode_copy(phydev->supported, phydrv->features);
+	} else {
+		err = phydrv->get_features(phydev);
+		if (err)
+			goto out;
+	}
+
 	of_set_phy_supported(phydev);
 	linkmode_copy(phydev->advertising, phydev->supported);
 
@@ -2186,20 +2129,8 @@ static int phy_probe(struct device *dev)
 	 * (e.g. hardware erratum) where the driver wants to set only one
 	 * of these bits.
 	 */
-	if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
-	    test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-				   phydev->supported);
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-				   phydev->supported);
-		if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
-			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-					 phydev->supported);
-		if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-			     phydrv->features))
-			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-					 phydev->supported);
-	} else {
+	if (!test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported) &&
+	    !test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) {
 		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
 				 phydev->supported);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -2209,17 +2140,7 @@ static int phy_probe(struct device *dev)
 	/* Set the state to READY by default */
 	phydev->state = PHY_READY;
 
-	if (phydev->drv->probe) {
-		/* Deassert the reset signal */
-		phy_device_reset(phydev, 0);
-
-		err = phydev->drv->probe(phydev);
-		if (err) {
-			/* Assert the reset signal */
-			phy_device_reset(phydev, 1);
-		}
-	}
-
+out:
 	mutex_unlock(&phydev->lock);
 
 	return err;
@@ -2255,7 +2176,11 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
 {
 	int retval;
 
-	if (WARN_ON(!new_driver->features)) {
+	/* Either the features are hard coded, or dynamically
+	 * determine. It cannot be both or neither
+	 */
+	if (WARN_ON((!new_driver->features && !new_driver->get_features) ||
+		    (new_driver->features && new_driver->get_features))) {
 		pr_err("%s: Driver features are missing\n", new_driver->name);
 		return -EINVAL;
 	}
@@ -2267,14 +2192,6 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
 	new_driver->mdiodrv.driver.remove = phy_remove;
 	new_driver->mdiodrv.driver.owner = owner;
 
-	/* The following works around an issue where the PHY driver doesn't bind
-	 * to the device, resulting in the genphy driver being used instead of
-	 * the dedicated driver. The root cause of the issue isn't known yet
-	 * and seems to be in the base driver core. Once this is fixed we may
-	 * remove this workaround.
-	 */
-	new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
-
 	retval = driver_register(&new_driver->mdiodrv.driver);
 	if (retval) {
 		pr_err("%s: Error %d in registering driver\n",
diff --git a/drivers/net/phy/phy_led_triggers.c b/drivers/net/phy/phy_led_triggers.c
index 263385b75bba..b86a4b2116f8 100644
--- a/drivers/net/phy/phy_led_triggers.c
+++ b/drivers/net/phy/phy_led_triggers.c
@@ -1,15 +1,5 @@
-/* Copyright (C) 2016 National Instruments Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2016 National Instruments Corp. */
 #include <linux/leds.h>
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 85987aac31c4..89750c7dfd6f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * phylink models the MAC to optional PHY connection, supporting
  * technologies such as SFP cages where the PHY is hot-pluggable.
  *
  * Copyright (C) 2015 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/ethtool.h>
 #include <linux/export.h>
@@ -305,6 +302,13 @@ static void phylink_mac_config(struct phylink *pl,
 	pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
 }
 
+static void phylink_mac_config_up(struct phylink *pl,
+				  const struct phylink_link_state *state)
+{
+	if (state->link)
+		phylink_mac_config(pl, state);
+}
+
 static void phylink_mac_an_restart(struct phylink *pl)
 {
 	if (pl->link_config.an_enabled &&
@@ -408,12 +412,12 @@ static void phylink_resolve(struct work_struct *w)
 		case MLO_AN_PHY:
 			link_state = pl->phy_state;
 			phylink_resolve_flow(pl, &link_state);
-			phylink_mac_config(pl, &link_state);
+			phylink_mac_config_up(pl, &link_state);
 			break;
 
 		case MLO_AN_FIXED:
 			phylink_get_fixed_state(pl, &link_state);
-			phylink_mac_config(pl, &link_state);
+			phylink_mac_config_up(pl, &link_state);
 			break;
 
 		case MLO_AN_INBAND:
@@ -694,9 +698,8 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
 
-	phy_start_machine(phy);
-	if (phy->irq > 0)
-		phy_start_interrupts(phy);
+	if (phy_interrupt_is_valid(phy))
+		phy_request_interrupt(phy);
 
 	return 0;
 }
@@ -1282,6 +1285,24 @@ int phylink_get_eee_err(struct phylink *pl)
 EXPORT_SYMBOL_GPL(phylink_get_eee_err);
 
 /**
+ * phylink_init_eee() - init and check the EEE features
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @clk_stop_enable: allow PHY to stop receive clock
+ *
+ * Must be called either with RTNL held or within mac_link_up()
+ */
+int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
+{
+	int ret = -EOPNOTSUPP;
+
+	if (pl->phydev)
+		ret = phy_init_eee(pl->phydev, clk_stop_enable);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_init_eee);
+
+/**
  * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
  * @pl: a pointer to a &struct phylink returned from phylink_create()
  * @eee: a pointer to a &struct ethtool_eee for the read parameters
@@ -1708,4 +1729,4 @@ void phylink_helper_basex_speed(struct phylink_link_state *state)
 }
 EXPORT_SYMBOL_GPL(phylink_helper_basex_speed);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index cfe2313dbefd..5486f6fb2ab2 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/qsemi.c
  *
@@ -6,12 +7,6 @@
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index cb4a23041a94..10df52ccddfe 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/realtek.c
  *
@@ -6,12 +7,6 @@
  * Author: Johnson Leung <r58129@freescale.com>
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #include <linux/bitops.h>
 #include <linux/phy.h>
@@ -278,6 +273,15 @@ static struct phy_driver realtek_drvs[] = {
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
 	}, {
+		PHY_ID_MATCH_EXACT(0x001cc800),
+		.name		= "Generic Realtek PHY",
+		.features	= PHY_GBIT_FEATURES,
+		.config_init	= genphy_config_init,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.read_page	= rtl821x_read_page,
+		.write_page	= rtl821x_write_page,
+	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
 		.features	= PHY_GBIT_FEATURES,
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 68c8fbf099f8..d4635c2178d1 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/ctype.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index f9477ff55545..c94d3bfbc772 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/smsc.c
  *
@@ -7,11 +8,6 @@
  *
  * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
  *
  */
diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index f17b3441779b..92b64e254b44 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches
  *
@@ -5,10 +6,6 @@
  *
  * This file was based on: drivers/spi/at25.c
  *     Copyright (C) 2006 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 33d733684f5b..5b6acf431f98 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/net/phy/ste10Xp.c
  *
@@ -6,12 +7,6 @@
  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
  *
  * Copyright (c) 2008 STMicroelectronics Limited
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c
index 34f58f2349e9..dad22481d9c1 100644
--- a/drivers/net/phy/swphy.c
+++ b/drivers/net/phy/swphy.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Software PHY emulation
  *
@@ -7,11 +8,6 @@
  *         Anton Vorontsov <avorontsov@ru.mvista.com>
  *
  * Copyright (c) 2006-2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 #include <linux/export.h>
 #include <linux/mii.h>
@@ -23,7 +19,6 @@
 #define MII_REGS_NUM 29
 
 struct swmii_regs {
-	u16 bmcr;
 	u16 bmsr;
 	u16 lpa;
 	u16 lpagb;
@@ -44,16 +39,13 @@ enum {
  */
 static const struct swmii_regs speed[] = {
 	[SWMII_SPEED_10] = {
-		.bmcr  = BMCR_FULLDPLX,
 		.lpa   = LPA_10FULL | LPA_10HALF,
 	},
 	[SWMII_SPEED_100] = {
-		.bmcr  = BMCR_FULLDPLX | BMCR_SPEED100,
 		.bmsr  = BMSR_100FULL | BMSR_100HALF,
 		.lpa   = LPA_100FULL | LPA_100HALF,
 	},
 	[SWMII_SPEED_1000] = {
-		.bmcr  = BMCR_FULLDPLX | BMCR_SPEED1000,
 		.bmsr  = BMSR_ESTATEN,
 		.lpagb = LPA_1000FULL | LPA_1000HALF,
 	},
@@ -61,13 +53,11 @@ static const struct swmii_regs speed[] = {
 
 static const struct swmii_regs duplex[] = {
 	[SWMII_DUPLEX_HALF] = {
-		.bmcr  = ~BMCR_FULLDPLX,
 		.bmsr  = BMSR_ESTATEN | BMSR_100HALF,
 		.lpa   = LPA_10HALF | LPA_100HALF,
 		.lpagb = LPA_1000HALF,
 	},
 	[SWMII_DUPLEX_FULL] = {
-		.bmcr  = ~0,
 		.bmsr  = BMSR_ESTATEN | BMSR_100FULL,
 		.lpa   = LPA_10FULL | LPA_100FULL,
 		.lpagb = LPA_1000FULL,
@@ -122,7 +112,6 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state)
 {
 	int speed_index, duplex_index;
 	u16 bmsr = BMSR_ANEGCAPABLE;
-	u16 bmcr = 0;
 	u16 lpagb = 0;
 	u16 lpa = 0;
 
@@ -140,7 +129,6 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state)
 	if (state->link) {
 		bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
 
-		bmcr  |= speed[speed_index].bmcr  & duplex[duplex_index].bmcr;
 		lpa   |= speed[speed_index].lpa   & duplex[duplex_index].lpa;
 		lpagb |= speed[speed_index].lpagb & duplex[duplex_index].lpagb;
 
@@ -153,7 +141,7 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state)
 
 	switch (reg) {
 	case MII_BMCR:
-		return bmcr;
+		return BMCR_ANENABLE;
 	case MII_BMSR:
 		return bmsr;
 	case MII_PHYSID1:
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 91247182bc52..beb054b931ee 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Teranetics PHY
  *
  * Author: Shaohui Xie <Shaohui.Xie@freescale.com>
  *
  * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -81,9 +78,8 @@ static struct phy_driver teranetics_driver[] = {
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Teranetics TN2020",
 	.features       = PHY_10GBIT_FEATURES,
-	.soft_reset	= gen10g_no_soft_reset,
+	.soft_reset	= genphy_no_soft_reset,
 	.aneg_done	= teranetics_aneg_done,
-	.config_init    = gen10g_config_init,
 	.config_aneg    = gen10g_config_aneg,
 	.read_status	= teranetics_read_status,
 	.match_phy_device = teranetics_match_phy_device,
diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c
index 1e4fc42e4629..219fc7cdc2b3 100644
--- a/drivers/net/phy/uPD60620.c
+++ b/drivers/net/phy/uPD60620.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for the Renesas PHY uPD60620.
  *
  * Copyright (C) 2015 Softing Industrial Automation GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 0646af458f6a..dc0dd87a6694 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Vitesse PHYs
  *
  * Author: Kriston Carson
- *
- * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index bd6084e315de..2d1449345959 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Xilinx GMII2RGMII Converter driver
  *
  * Copyright (C) 2016 Xilinx, Inc.
@@ -8,16 +9,6 @@
  *
  * Description:
  * This driver is developed for Xilinx GMII2RGMII Converter
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/module.h>
 #include <linux/kernel.h>