cxgb4: Shutdown adapter if firmware times out or errors out

Perform an emergency shutdown of the adapter and stop it from
continuing any further communication on the ports or DMA to the
host. This is typically used when the adapter and/or firmware
have crashed and we want to prevent any further accidental
communication with the rest of the world. This will also force
the port Link Status to go down -- if register writes work --
which should help our peers figure out that we're down.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 37 insertions, 2 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index ac712acf256d..87000cd39737 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -330,11 +330,12 @@ int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd,
 		 * mailbox access list but this is a start.  We very rearely
 		 * contend on access to the mailbox ...
 		 */
-		if (i > FW_CMD_MAX_TIMEOUT) {
+		pcie_fw = t4_read_reg(adap, PCIE_FW_A);
+		if (i > FW_CMD_MAX_TIMEOUT || (pcie_fw & PCIE_FW_ERR_F)) {
 			spin_lock(&adap->mbox_lock);
 			list_del(&entry.list);
 			spin_unlock(&adap->mbox_lock);
-			ret = -EBUSY;
+			ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -EBUSY;
 			t4_record_mbox(adap, cmd, size, access, ret);
 			return ret;
 		}
@@ -432,6 +433,7 @@ int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd,
 	spin_lock(&adap->mbox_lock);
 	list_del(&entry.list);
 	spin_unlock(&adap->mbox_lock);
+	t4_fatal_err(adap);
 	return ret;
 }
 
@@ -7558,6 +7560,39 @@ int t4_prep_adapter(struct adapter *adapter)
 }
 
 /**
+ *	t4_shutdown_adapter - shut down adapter, host & wire
+ *	@adapter: the adapter
+ *
+ *	Perform an emergency shutdown of the adapter and stop it from
+ *	continuing any further communication on the ports or DMA to the
+ *	host.  This is typically used when the adapter and/or firmware
+ *	have crashed and we want to prevent any further accidental
+ *	communication with the rest of the world.  This will also force
+ *	the port Link Status to go down -- if register writes work --
+ *	which should help our peers figure out that we're down.
+ */
+int t4_shutdown_adapter(struct adapter *adapter)
+{
+	int port;
+
+	t4_intr_disable(adapter);
+	t4_write_reg(adapter, DBG_GPIO_EN_A, 0);
+	for_each_port(adapter, port) {
+		u32 a_port_cfg = PORT_REG(port,
+					  is_t4(adapter->params.chip)
+					  ? XGMAC_PORT_CFG_A
+					  : MAC_PORT_CFG_A);
+
+		t4_write_reg(adapter, a_port_cfg,
+			     t4_read_reg(adapter, a_port_cfg)
+			     & ~SIGNAL_DET_V(1));
+	}
+	t4_set_reg_field(adapter, SGE_CONTROL_A, GLOBALENABLE_F, 0);
+
+	return 0;
+}
+
+/**
  *	t4_bar2_sge_qregs - return BAR2 SGE Queue register information
  *	@adapter: the adapter
  *	@qid: the Queue ID