diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2010-05-06 02:00:06 +0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-05-06 12:31:28 +0400 |
| commit | 6dfaa76994e5d49a82afb415bbe1362e901b2b95 (patch) | |
| tree | ab1629de17f4d8763343b6d53ee58a674bb7d2e4 /drivers/net/e1000e/ich8lan.c | |
| parent | ffb273623bc506d854902a415ef241b79232f93a (diff) | |
| download | linux-6dfaa76994e5d49a82afb415bbe1362e901b2b95.tar.xz | |
e1000e: reset MAC-PHY interconnect on 82577/82578 during Sx->S0
During Sx->S0 transitions, the interconnect between the MAC and PHY on
82577/82578 can remain in SMBus mode instead of transitioning to the
PCIe-like mode required during normal operation. Toggling the LANPHYPC
Value bit essentially resets the interconnect forcing it to the correct
mode.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 5059c22155d9..0bfef8e16a7b 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -83,6 +83,8 @@ #define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ +/* FW established a valid mode */ +#define E1000_ICH_FWSM_FW_VALID 0x00008000 #define E1000_ICH_MNG_IAMT_MODE 0x2 @@ -259,6 +261,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; + u32 ctrl; s32 ret_val = 0; phy->addr = 1; @@ -274,6 +277,23 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + /* + * The MAC-PHY interconnect may still be in SMBus mode + * after Sx->S0. Toggle the LANPHYPC Value bit to force + * the interconnect to PCIe mode, but only if there is no + * firmware present otherwise firmware will have done it. + */ + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; + ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, ctrl); + udelay(10); + ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, ctrl); + msleep(50); + } + phy->id = e1000_phy_unknown; ret_val = e1000e_get_phy_id(hw); if (ret_val) |