diff options
| author | Oleksij Rempel <o.rempel@pengutronix.de> | 2025-04-10 15:42:49 +0300 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2025-04-15 03:26:35 +0300 |
| commit | 4129a75a76a755c151be1ebc0e7d618a4d21e41f (patch) | |
| tree | 72bcdb8ffe39450c4688ac74029a1020b173116f /drivers/net/dsa/microchip/ksz_common.h | |
| parent | b8ebc89383963fc8084e1914f30a4271429f9b36 (diff) | |
| download | linux-4129a75a76a755c151be1ebc0e7d618a4d21e41f.tar.xz | |
net: dsa: microchip: add ETS scheduler support for KSZ88x3 switches
Implement Enhanced Transmission Selection scheduler (ETS) support for
KSZ88x3 devices, which support two fixed egress scheduling modes:
Strict Priority and Weighted Fair Queuing (WFQ).
Since the switch does not allow remapping priorities to queues or
adjusting weights, this implementation only supports enabling
strict priority mode. If strict mode is not explicitly requested,
the switch falls back to its default WFQ mode.
This patch introduces KSZ88x3-specific handlers for ETS add and
delete operations and uses TXQ Split Control registers to toggle
the WFQ enable bit per queue. Corresponding macros are also added
for register access.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250410124249.2728568-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.h')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index af17a9c030d4..dd5429ff16ee 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -836,6 +836,25 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define SW_HI_SPEED_DRIVE_STRENGTH_S 4 #define SW_LO_SPEED_DRIVE_STRENGTH_S 0 +/* TXQ Split Control Register for per-port, per-queue configuration. + * Register 0xAF is TXQ Split for Q3 on Port 1. + * Register offset formula: 0xAF + (port * 4) + (3 - queue) + * where: port = 0..2, queue = 0..3 + */ +#define KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue) \ + (0xAF + ((port) * 4) + (3 - (queue))) + +/* Bit 7 selects between: + * 0 = Strict priority mode (highest-priority queue first) + * 1 = Weighted Fair Queuing (WFQ) mode: + * Queue weights: Q3:Q2:Q1:Q0 = 8:4:2:1 + * If any queues are empty, weight is redistributed. + * + * Note: This is referred to as "Weighted Fair Queuing" (WFQ) in KSZ8863/8873 + * documentation, and as "Weighted Round Robin" (WRR) in KSZ9477 family docs. + */ +#define KSZ8873_TXQ_WFQ_ENABLE BIT(7) + #define KSZ9477_REG_PORT_OUT_RATE_0 0x0420 #define KSZ9477_OUT_RATE_NO_LIMIT 0 |