Merge tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:

   - Dynamic partition support

   - Fix deadlock in sm_ftl

   - Various refcount fixes in maps, partitions and parser code

   - Integer overflow fixes in mtdchar

   - Support for Sercomm partitions

  NAND driver changes:

   - Clockrate fix for arasan

   - Add ATO25D1GA support

   - Double free fix for meson driver

   - Fix probe/remove methods in cafe NAND

   - Support unprotected spare data pages in qcom_nandc

  SPI NOR core changes:

   - move SECT_4K_PMC flag out of the core as it's a vendor specific
     flag

   - s/addr_width/addr_nbytes/g: address width means the number of IO
     lines used for the address, whereas in the code it is used as the
     number of address bytes.

   - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP
     parsing time we should not change members of struct spi_nor, but
     instead fill members of struct spi_nor_flash_parameters which could
     later on be used by the callers.

   - track flash's internal address mode so that we can use 4B opcodes
     together with opcodes that don't have a 4B opcode correspondent.

  SPI NOR manufacturer drivers changes:

   - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".

   - micron-st: Skip FSR reading if SPI controller does not support it
     to allow flashes that support FSR to work even when attached to
     such SPI controllers.

   - spansion: Add s25hl-t/s25hs-t IDs and fixups"

* tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits)
  mtd: core: check partition before dereference
  mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
  mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
  mtd: spi-nor: spansion: Add local function to discover page size
  mtd: spi-nor: core: Track flash's internal address mode
  mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
  mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time
  mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes
  mtd: spi-nor: s/addr_width/addr_nbytes
  mtd: spi-nor: esmt: Use correct name of f25l32qa
  mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
  MAINTAINERS: Use my kernel.org email
  mtd: rawnand: arasan: Fix clock rate in NV-DDR
  mtd: rawnand: arasan: Update NAND bus clock instead of system clock
  mtd: core: introduce of support for dynamic partitions
  dt-bindings: mtd: partitions: add additional example for qcom,smem-part
  dt-bindings: mtd: partitions: support label/name only partition
  mtd: spi-nor: move SECT_4K_PMC special handling
  mtd: dataflash: Add SPI ID table
  mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path
  ...

41 files changed, 1029 insertions, 238 deletions

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 134e27328597..25bad4318305 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -112,6 +112,13 @@ static const struct of_device_id dataflash_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, dataflash_dt_ids);
 #endif
 
+static const struct spi_device_id dataflash_spi_ids[] = {
+	{ .name = "at45", },
+	{ .name = "dataflash", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, dataflash_spi_ids);
+
 /* ......................................................................... */
 
 /*
@@ -936,6 +943,7 @@ static struct spi_driver dataflash_driver = {
 
 	.probe		= dataflash_probe,
 	.remove		= dataflash_remove,
+	.id_table	= dataflash_spi_ids,
 
 	/* FIXME:  investigate suspend and resume... */
 };
diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
index 6950a8764815..36e060386e59 100644
--- a/drivers/mtd/devices/powernv_flash.c
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -270,7 +270,9 @@ static int powernv_flash_release(struct platform_device *pdev)
 	struct powernv_flash *data = dev_get_drvdata(&(pdev->dev));
 
 	/* All resources should be freed automatically */
-	return mtd_device_unregister(&(data->mtd));
+	WARN_ON(mtd_device_unregister(&data->mtd));
+
+	return 0;
 }
 
 static const struct of_device_id powernv_flash_match[] = {
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 24073518587f..f58742486d3d 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -1045,13 +1045,9 @@ static int spear_smi_remove(struct platform_device *pdev)
 {
 	struct spear_smi *dev;
 	struct spear_snor_flash *flash;
-	int ret, i;
+	int i;
 
 	dev = platform_get_drvdata(pdev);
-	if (!dev) {
-		dev_err(&pdev->dev, "dev is null\n");
-		return -ENODEV;
-	}
 
 	/* clean up for all nor flash */
 	for (i = 0; i < dev->num_flashes; i++) {
@@ -1060,9 +1056,7 @@ static int spear_smi_remove(struct platform_device *pdev)
 			continue;
 
 		/* clean up mtd stuff */
-		ret = mtd_device_unregister(&flash->mtd);
-		if (ret)
-			dev_err(&pdev->dev, "error removing mtd\n");
+		WARN_ON(mtd_device_unregister(&flash->mtd));
 	}
 
 	clk_disable_unprepare(dev->clk);
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index d3377b10fc0f..54861d889c30 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -2084,15 +2084,12 @@ static int stfsm_probe(struct platform_device *pdev)
 	 * Configure READ/WRITE/ERASE sequences according to platform and
 	 * device flags.
 	 */
-	if (info->config) {
+	if (info->config)
 		ret = info->config(fsm);
-		if (ret)
-			goto err_clk_unprepare;
-	} else {
+	else
 		ret = stfsm_prepare_rwe_seqs_default(fsm);
-		if (ret)
-			goto err_clk_unprepare;
-	}
+	if (ret)
+		goto err_clk_unprepare;
 
 	fsm->mtd.name		= info->name;
 	fsm->mtd.dev.parent	= &pdev->dev;
@@ -2115,10 +2112,12 @@ static int stfsm_probe(struct platform_device *pdev)
 		(long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
 		fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
 
-	return mtd_device_register(&fsm->mtd, NULL, 0);
-
+	ret = mtd_device_register(&fsm->mtd, NULL, 0);
+	if (ret) {
 err_clk_unprepare:
-	clk_disable_unprepare(fsm->clk);
+		clk_disable_unprepare(fsm->clk);
+	}
+
 	return ret;
 }
 
@@ -2126,9 +2125,11 @@ static int stfsm_remove(struct platform_device *pdev)
 {
 	struct stfsm *fsm = platform_get_drvdata(pdev);
 
+	WARN_ON(mtd_device_unregister(&fsm->mtd));
+
 	clk_disable_unprepare(fsm->clk);
 
-	return mtd_device_unregister(&fsm->mtd);
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
index a3439b791eeb..a6161ce340d4 100644
--- a/drivers/mtd/hyperbus/hbmc-am654.c
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -233,16 +233,16 @@ static int am654_hbmc_remove(struct platform_device *pdev)
 {
 	struct am654_hbmc_priv *priv = platform_get_drvdata(pdev);
 	struct am654_hbmc_device_priv *dev_priv = priv->hbdev.priv;
-	int ret;
 
-	ret = hyperbus_unregister_device(&priv->hbdev);
+	hyperbus_unregister_device(&priv->hbdev);
+
 	if (priv->mux_ctrl)
 		mux_control_deselect(priv->mux_ctrl);
 
 	if (dev_priv->rx_chan)
 		dma_release_channel(dev_priv->rx_chan);
 
-	return ret;
+	return 0;
 }
 
 static const struct of_device_id am654_hbmc_dt_ids[] = {
diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c
index 2f9fc4e17d53..4d8047d43e48 100644
--- a/drivers/mtd/hyperbus/hyperbus-core.c
+++ b/drivers/mtd/hyperbus/hyperbus-core.c
@@ -126,16 +126,12 @@ int hyperbus_register_device(struct hyperbus_device *hbdev)
 }
 EXPORT_SYMBOL_GPL(hyperbus_register_device);
 
-int hyperbus_unregister_device(struct hyperbus_device *hbdev)
+void hyperbus_unregister_device(struct hyperbus_device *hbdev)
 {
-	int ret = 0;
-
 	if (hbdev && hbdev->mtd) {
-		ret = mtd_device_unregister(hbdev->mtd);
+		WARN_ON(mtd_device_unregister(hbdev->mtd));
 		map_destroy(hbdev->mtd);
 	}
-
-	return ret;
 }
 EXPORT_SYMBOL_GPL(hyperbus_unregister_device);
 
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index 6e08ec1d4f09..d00d30243403 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -134,7 +134,7 @@ static int rpcif_hb_probe(struct platform_device *pdev)
 
 	error = rpcif_hw_init(&hyperbus->rpc, true);
 	if (error)
-		return error;
+		goto out_disable_rpm;
 
 	hyperbus->hbdev.map.size = hyperbus->rpc.size;
 	hyperbus->hbdev.map.virt = hyperbus->rpc.dirmap;
@@ -145,19 +145,24 @@ static int rpcif_hb_probe(struct platform_device *pdev)
 	hyperbus->hbdev.np = of_get_next_child(pdev->dev.parent->of_node, NULL);
 	error = hyperbus_register_device(&hyperbus->hbdev);
 	if (error)
-		rpcif_disable_rpm(&hyperbus->rpc);
+		goto out_disable_rpm;
+
+	return 0;
 
+out_disable_rpm:
+	rpcif_disable_rpm(&hyperbus->rpc);
 	return error;
 }
 
 static int rpcif_hb_remove(struct platform_device *pdev)
 {
 	struct rpcif_hyperbus *hyperbus = platform_get_drvdata(pdev);
-	int error = hyperbus_unregister_device(&hyperbus->hbdev);
+
+	hyperbus_unregister_device(&hyperbus->hbdev);
 
 	rpcif_disable_rpm(&hyperbus->rpc);
 
-	return error;
+	return 0;
 }
 
 static struct platform_driver rpcif_platform_driver = {
diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
index 72f5c7b30079..367e2d906de0 100644
--- a/drivers/mtd/lpddr/lpddr2_nvm.c
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -478,7 +478,9 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
  */
 static int lpddr2_nvm_remove(struct platform_device *pdev)
 {
-	return mtd_device_unregister(dev_get_drvdata(&pdev->dev));
+	WARN_ON(mtd_device_unregister(dev_get_drvdata(&pdev->dev)));
+
+	return 0;
 }
 
 /* Initialize platform_driver data structure for lpddr2_nvm */
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 4f63b8430c71..85eca6a192e6 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -66,18 +66,12 @@ static int physmap_flash_remove(struct platform_device *dev)
 {
 	struct physmap_flash_info *info;
 	struct physmap_flash_data *physmap_data;
-	int i, err = 0;
+	int i;
 
 	info = platform_get_drvdata(dev);
-	if (!info) {
-		err = -EINVAL;
-		goto out;
-	}
 
 	if (info->cmtd) {
-		err = mtd_device_unregister(info->cmtd);
-		if (err)
-			goto out;
+		WARN_ON(mtd_device_unregister(info->cmtd));
 
 		if (info->cmtd != info->mtds[0])
 			mtd_concat_destroy(info->cmtd);
@@ -92,10 +86,9 @@ static int physmap_flash_remove(struct platform_device *dev)
 	if (physmap_data && physmap_data->exit)
 		physmap_data->exit(dev);
 
-out:
 	pm_runtime_put(&dev->dev);
 	pm_runtime_disable(&dev->dev);
-	return err;
+	return 0;
 }
 
 static void physmap_set_vpp(struct map_info *map, int state)
diff --git a/drivers/mtd/maps/physmap-versatile.c b/drivers/mtd/maps/physmap-versatile.c
index ad7cd9cfaee0..a1b8b7b25f88 100644
--- a/drivers/mtd/maps/physmap-versatile.c
+++ b/drivers/mtd/maps/physmap-versatile.c
@@ -93,6 +93,7 @@ static int ap_flash_init(struct platform_device *pdev)
 		return -ENODEV;
 	}
 	ebi_base = of_iomap(ebi, 0);
+	of_node_put(ebi);
 	if (!ebi_base)
 		return -ENODEV;
 
@@ -207,6 +208,7 @@ int of_flash_probe_versatile(struct platform_device *pdev,
 
 		versatile_flashprot = (enum versatile_flashprot)devid->data;
 		rmap = syscon_node_to_regmap(sysnp);
+		of_node_put(sysnp);
 		if (IS_ERR(rmap))
 			return PTR_ERR(rmap);
 
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d0f9c4b0285c..05860288a7af 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -615,21 +615,24 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd,
 	if (!usr_oob)
 		req.ooblen = 0;
 
+	req.len &= 0xffffffff;
+	req.ooblen &= 0xffffffff;
+
 	if (req.start + req.len > mtd->size)
 		return -EINVAL;
 
 	datbuf_len = min_t(size_t, req.len, mtd->erasesize);
 	if (datbuf_len > 0) {
-		datbuf = kmalloc(datbuf_len, GFP_KERNEL);
+		datbuf = kvmalloc(datbuf_len, GFP_KERNEL);
 		if (!datbuf)
 			return -ENOMEM;
 	}
 
 	oobbuf_len = min_t(size_t, req.ooblen, mtd->erasesize);
 	if (oobbuf_len > 0) {
-		oobbuf = kmalloc(oobbuf_len, GFP_KERNEL);
+		oobbuf = kvmalloc(oobbuf_len, GFP_KERNEL);
 		if (!oobbuf) {
-			kfree(datbuf);
+			kvfree(datbuf);
 			return -ENOMEM;
 		}
 	}
@@ -679,8 +682,8 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd,
 		usr_oob += ops.oobretlen;
 	}
 
-	kfree(datbuf);
-	kfree(oobbuf);
+	kvfree(datbuf);
+	kvfree(oobbuf);
 
 	return ret;
 }
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 9eb0680db312..a9b8be9f40dc 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -546,6 +546,68 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
 	return 0;
 }
 
+static void mtd_check_of_node(struct mtd_info *mtd)
+{
+	struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
+	const char *pname, *prefix = "partition-";
+	int plen, mtd_name_len, offset, prefix_len;
+	struct mtd_info *parent;
+	bool found = false;
+
+	/* Check if MTD already has a device node */
+	if (dev_of_node(&mtd->dev))
+		return;
+
+	/* Check if a partitions node exist */
+	if (!mtd_is_partition(mtd))
+		return;
+	parent = mtd->parent;
+	parent_dn = dev_of_node(&parent->dev);
+	if (!parent_dn)
+		return;
+
+	partitions = of_get_child_by_name(parent_dn, "partitions");
+	if (!partitions)
+		goto exit_parent;
+
+	prefix_len = strlen(prefix);
+	mtd_name_len = strlen(mtd->name);
+
+	/* Search if a partition is defined with the same name */
+	for_each_child_of_node(partitions, mtd_dn) {
+		offset = 0;
+
+		/* Skip partition with no/wrong prefix */
+		if (!of_node_name_prefix(mtd_dn, "partition-"))
+			continue;
+
+		/* Label have priority. Check that first */
+		if (of_property_read_string(mtd_dn, "label", &pname)) {
+			of_property_read_string(mtd_dn, "name", &pname);
+			offset = prefix_len;
+		}
+
+		plen = strlen(pname) - offset;
+		if (plen == mtd_name_len &&
+		    !strncmp(mtd->name, pname + offset, plen)) {
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		goto exit_partitions;
+
+	/* Set of_node only for nvmem */
+	if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
+		mtd_set_of_node(mtd, mtd_dn);
+
+exit_partitions:
+	of_node_put(partitions);
+exit_parent:
+	of_node_put(parent_dn);
+}
+
 /**
  *	add_mtd_device - register an MTD device
  *	@mtd: pointer to new MTD device info structure
@@ -658,6 +720,7 @@ int add_mtd_device(struct mtd_info *mtd)
 	mtd->dev.devt = MTD_DEVT(i);
 	dev_set_name(&mtd->dev, "mtd%d", i);
 	dev_set_drvdata(&mtd->dev, mtd);
+	mtd_check_of_node(mtd);
 	of_node_get(mtd_get_of_node(mtd));
 	error = device_register(&mtd->dev);
 	if (error)
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 53bd10738418..296fb16c8dc3 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -347,17 +347,17 @@ static int anfc_select_target(struct nand_chip *chip, int target)
 
 	/* Update clock frequency */
 	if (nfc->cur_clk != anand->clk) {
-		clk_disable_unprepare(nfc->controller_clk);
-		ret = clk_set_rate(nfc->controller_clk, anand->clk);
+		clk_disable_unprepare(nfc->bus_clk);
+		ret = clk_set_rate(nfc->bus_clk, anand->clk);
 		if (ret) {
 			dev_err(nfc->dev, "Failed to change clock rate\n");
 			return ret;
 		}
 
-		ret = clk_prepare_enable(nfc->controller_clk);
+		ret = clk_prepare_enable(nfc->bus_clk);
 		if (ret) {
 			dev_err(nfc->dev,
-				"Failed to re-enable the controller clock\n");
+				"Failed to re-enable the bus clock\n");
 			return ret;
 		}
 
@@ -1043,7 +1043,13 @@ static int anfc_setup_interface(struct nand_chip *chip, int target,
 				 DQS_BUFF_SEL_OUT(dqs_mode);
 	}
 
-	anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
+	if (nand_interface_is_sdr(conf)) {
+		anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
+	} else {
+		/* ONFI timings are defined in picoseconds */
+		anand->clk = div_u64((u64)NSEC_PER_SEC * 1000,
+				     conf->timings.nvddr.tCK_min);
+	}
 
 	/*
 	 * Due to a hardware bug in the ZynqMP SoC, SDR timing modes 0-1 work
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 6ef14442c71a..c9ac3baf68c0 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -2629,7 +2629,9 @@ static int atmel_nand_controller_remove(struct platform_device *pdev)
 {
 	struct atmel_nand_controller *nc = platform_get_drvdata(pdev);
 
-	return nc->caps->ops->remove(nc);
+	WARN_ON(nc->caps->ops->remove(nc));
+
+	return 0;
 }
 
 static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 9dbf031716a6..af119e376352 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -679,8 +679,10 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 
 	cafe = kzalloc(sizeof(*cafe), GFP_KERNEL);
-	if (!cafe)
-		return  -ENOMEM;
+	if (!cafe) {
+		err = -ENOMEM;
+		goto out_disable_device;
+	}
 
 	mtd = nand_to_mtd(&cafe->nand);
 	mtd->dev.parent = &pdev->dev;
@@ -801,6 +803,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	pci_iounmap(pdev, cafe->mmio);
  out_free_mtd:
 	kfree(cafe);
+ out_disable_device:
+	pci_disable_device(pdev);
  out:
 	return err;
 }
@@ -822,6 +826,7 @@ static void cafe_nand_remove(struct pci_dev *pdev)
 	pci_iounmap(pdev, cafe->mmio);
 	dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
 	kfree(cafe);
+	pci_disable_device(pdev);
 }
 
 static const struct pci_device_id cafe_nand_tbl[] = {
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index ac3be92872d0..829b76b303aa 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1293,26 +1293,20 @@ meson_nfc_nand_chip_init(struct device *dev,
 	return 0;
 }
 
-static int meson_nfc_nand_chip_cleanup(struct meson_nfc *nfc)
+static void meson_nfc_nand_chip_cleanup(struct meson_nfc *nfc)
 {
 	struct meson_nfc_nand_chip *meson_chip;
 	struct mtd_info *mtd;
-	int ret;
 
 	while (!list_empty(&nfc->chips)) {
 		meson_chip = list_first_entry(&nfc->chips,
 					      struct meson_nfc_nand_chip, node);
 		mtd = nand_to_mtd(&meson_chip->nand);
-		ret = mtd_device_unregister(mtd);
-		if (ret)
-			return ret;
+		WARN_ON(mtd_device_unregister(mtd));
 
-		meson_nfc_free_buffer(&meson_chip->nand);
 		nand_cleanup(&meson_chip->nand);
 		list_del(&meson_chip->node);
 	}
-
-	return 0;
 }
 
 static int meson_nfc_nand_chips_init(struct device *dev,
@@ -1445,16 +1439,11 @@ err_clk:
 static int meson_nfc_remove(struct platform_device *pdev)
 {
 	struct meson_nfc *nfc = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = meson_nfc_nand_chip_cleanup(nfc);
-	if (ret)
-		return ret;
+	meson_nfc_nand_chip_cleanup(nfc);
 
 	meson_nfc_disable_clk(nfc);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 58c32a11792e..4a9f2b6c772d 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -2278,16 +2278,14 @@ static int omap_nand_remove(struct platform_device *pdev)
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 	struct omap_nand_info *info = mtd_to_omap(mtd);
-	int ret;
 
 	rawnand_sw_bch_cleanup(nand_chip);
 
 	if (info->dma)
 		dma_release_channel(info->dma);
-	ret = mtd_device_unregister(mtd);
-	WARN_ON(ret);
+	WARN_ON(mtd_device_unregister(mtd));
 	nand_cleanup(nand_chip);
-	return ret;
+	return 0;
 }
 
 /* omap_nand_ids defined in linux/platform_data/mtd-nand-omap2.h */
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 048b255faa76..8f80019a9f01 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -80,8 +80,10 @@
 #define	DISABLE_STATUS_AFTER_WRITE	4
 #define	CW_PER_PAGE			6
 #define	UD_SIZE_BYTES			9
+#define	UD_SIZE_BYTES_MASK		GENMASK(18, 9)
 #define	ECC_PARITY_SIZE_BYTES_RS	19
 #define	SPARE_SIZE_BYTES		23
+#define	SPARE_SIZE_BYTES_MASK		GENMASK(26, 23)
 #define	NUM_ADDR_CYCLES			27
 #define	STATUS_BFR_READ			30
 #define	SET_RD_MODE_AFTER_STATUS	31
@@ -102,6 +104,7 @@
 #define	ECC_MODE			4
 #define	ECC_PARITY_SIZE_BYTES_BCH	8
 #define	ECC_NUM_DATA_BYTES		16
+#define	ECC_NUM_DATA_BYTES_MASK		GENMASK(25, 16)
 #define	ECC_FORCE_CLK_OPEN		30
 
 /* NAND_DEV_CMD1 bits */
@@ -238,6 +241,9 @@ nandc_set_reg(chip, reg,			\
  * @bam_ce - the array of BAM command elements
  * @cmd_sgl - sgl for NAND BAM command pipe
  * @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @last_data_desc - last DMA desc in data channel (tx/rx).
+ * @last_cmd_desc - last DMA desc in command channel.
+ * @txn_done - completion for NAND transfer.
  * @bam_ce_pos - the index in bam_ce which is available for next sgl
  * @bam_ce_start - the index in bam_ce which marks the start position ce
  *		   for current sgl. It will be used for size calculation
@@ -250,14 +256,14 @@ nandc_set_reg(chip, reg,			\
  * @rx_sgl_start - start index in data sgl for rx.
  * @wait_second_completion - wait for second DMA desc completion before making
  *			     the NAND transfer completion.
- * @txn_done - completion for NAND transfer.
- * @last_data_desc - last DMA desc in data channel (tx/rx).
- * @last_cmd_desc - last DMA desc in command channel.
  */
 struct bam_transaction {
 	struct bam_cmd_element *bam_ce;
 	struct scatterlist *cmd_sgl;
 	struct scatterlist *data_sgl;
+	struct dma_async_tx_descriptor *last_data_desc;
+	struct dma_async_tx_descriptor *last_cmd_desc;
+	struct completion txn_done;
 	u32 bam_ce_pos;
 	u32 bam_ce_start;
 	u32 cmd_sgl_pos;
@@ -267,25 +273,23 @@ struct bam_transaction {
 	u32 rx_sgl_pos;
 	u32 rx_sgl_start;
 	bool wait_second_completion;
-	struct completion txn_done;
-	struct dma_async_tx_descriptor *last_data_desc;
-	struct dma_async_tx_descriptor *last_cmd_desc;
 };
 
 /*
  * This data type corresponds to the nand dma descriptor
+ * @dma_desc - low level DMA engine descriptor
  * @list - list for desc_info
- * @dir - DMA transfer direction
+ *
  * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
  *	      ADM
  * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
  * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
- * @dma_desc - low level DMA engine descriptor
+ * @dir - DMA transfer direction
  */
 struct desc_info {
+	struct dma_async_tx_descriptor *dma_desc;
 	struct list_head node;
 
-	enum dma_data_direction dir;
 	union {
 		struct scatterlist adm_sgl;
 		struct {
@@ -293,7 +297,7 @@ struct desc_info {
 			int sgl_cnt;
 		};
 	};
-	struct dma_async_tx_descriptor *dma_desc;
+	enum dma_data_direction dir;
 };
 
 /*
@@ -337,52 +341,64 @@ struct nandc_regs {
 /*
  * NAND controller data struct
  *
- * @controller:			base controller structure
- * @host_list:			list containing all the chips attached to the
- *				controller
  * @dev:			parent device
+ *
  * @base:			MMIO base
- * @base_phys:			physical base address of controller registers
- * @base_dma:			dma base address of controller registers
+ *
  * @core_clk:			controller clock
  * @aon_clk:			another controller clock
  *
+ * @regs:			a contiguous chunk of memory for DMA register
+ *				writes. contains the register values to be
+ *				written to controller
+ *
+ * @props:			properties of current NAND controller,
+ *				initialized via DT match data
+ *
+ * @controller:			base controller structure
+ * @host_list:			list containing all the chips attached to the
+ *				controller
+ *
  * @chan:			dma channel
  * @cmd_crci:			ADM DMA CRCI for command flow control
  * @data_crci:			ADM DMA CRCI for data flow control
+ *
  * @desc_list:			DMA descriptor list (list of desc_infos)
  *
  * @data_buffer:		our local DMA buffer for page read/writes,
  *				used when we can't use the buffer provided
  *				by upper layers directly
- * @buf_size/count/start:	markers for chip->legacy.read_buf/write_buf
- *				functions
  * @reg_read_buf:		local buffer for reading back registers via DMA
+ *
+ * @base_phys:			physical base address of controller registers
+ * @base_dma:			dma base address of controller registers
  * @reg_read_dma:		contains dma address for register read buffer
- * @reg_read_pos:		marker for data read in reg_read_buf
  *
- * @regs:			a contiguous chunk of memory for DMA register
- *				writes. contains the register values to be
- *				written to controller
- * @cmd1/vld:			some fixed controller register values
- * @props:			properties of current NAND controller,
- *				initialized via DT match data
+ * @buf_size/count/start:	markers for chip->legacy.read_buf/write_buf
+ *				functions
  * @max_cwperpage:		maximum QPIC codewords required. calculated
  *				from all connected NAND devices pagesize
+ *
+ * @reg_read_pos:		marker for data read in reg_read_buf
+ *
+ * @cmd1/vld:			some fixed controller register values
  */
 struct qcom_nand_controller {
-	struct nand_controller controller;
-	struct list_head host_list;
-
 	struct device *dev;
 
 	void __iomem *base;
-	phys_addr_t base_phys;
-	dma_addr_t base_dma;
 
 	struct clk *core_clk;
 	struct clk *aon_clk;
 
+	struct nandc_regs *regs;
+	struct bam_transaction *bam_txn;
+
+	const struct qcom_nandc_props *props;
+
+	struct nand_controller controller;
+	struct list_head host_list;
+
 	union {
 		/* will be used only by QPIC for BAM DMA */
 		struct {
@@ -400,64 +416,89 @@ struct qcom_nand_controller {
 	};
 
 	struct list_head desc_list;
-	struct bam_transaction *bam_txn;
 
 	u8		*data_buffer;
+	__le32		*reg_read_buf;
+
+	phys_addr_t base_phys;
+	dma_addr_t base_dma;
+	dma_addr_t reg_read_dma;
+
 	int		buf_size;
 	int		buf_count;
 	int		buf_start;
 	unsigned int	max_cwperpage;
 
-	__le32 *reg_read_buf;
-	dma_addr_t reg_read_dma;
 	int reg_read_pos;
 
-	struct nandc_regs *regs;
-
 	u32 cmd1, vld;
-	const struct qcom_nandc_props *props;
+};
+
+/*
+ * NAND special boot partitions
+ *
+ * @page_offset:		offset of the partition where spare data is not protected
+ *				by ECC (value in pages)
+ * @page_offset:		size of the partition where spare data is not protected
+ *				by ECC (value in pages)
+ */
+struct qcom_nand_boot_partition {
+	u32 page_offset;
+	u32 page_size;
 };
 
 /*
  * NAND chip structure
  *
+ * @boot_partitions:		array of boot partitions where offset and size of the
+ *				boot partitions are stored
+ *
  * @chip:			base NAND chip structure
  * @node:			list node to add itself to host_list in
  *				qcom_nand_controller
  *
+ * @nr_boot_partitions:		count of the boot partitions where spare data is not
+ *				protected by ECC
+ *
  * @cs:				chip select value for this chip
  * @cw_size:			the number of bytes in a single step/codeword
  *				of a page, consisting of all data, ecc, spare
  *				and reserved bytes
  * @cw_data:			the number of bytes within a codeword protected
  *				by ECC
- * @use_ecc:			request the controller to use ECC for the
- *				upcoming read/write
- * @bch_enabled:		flag to tell whether BCH ECC mode is used
  * @ecc_bytes_hw:		ECC bytes used by controller hardware for this
  *				chip
- * @status:			value to be returned if NAND_CMD_STATUS command
- *				is executed
+ *
  * @last_command:		keeps track of last command on this chip. used
  *				for reading correct status
  *
  * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
  *				ecc/non-ecc mode for the current nand flash
  *				device
+ *
+ * @status:			value to be returned if NAND_CMD_STATUS command
+ *				is executed
+ * @codeword_fixup:		keep track of the current layout used by
+ *				the driver for read/write operation.
+ * @use_ecc:			request the controller to use ECC for the
+ *				upcoming read/write
+ * @bch_enabled:		flag to tell whether BCH ECC mode is used
  */
 struct qcom_nand_host {
+	struct qcom_nand_boot_partition *boot_partitions;
+
 	struct nand_chip chip;
 	struct list_head node;
 
+	int nr_boot_partitions;
+
 	int cs;
 	int cw_size;
 	int cw_data;
-	bool use_ecc;
-	bool bch_enabled;
 	int ecc_bytes_hw;
 	int spare_bytes;
 	int bbm_size;
-	u8 status;
+
 	int last_command;
 
 	u32 cfg0, cfg1;
@@ -466,23 +507,30 @@ struct qcom_nand_host {
 	u32 ecc_bch_cfg;
 	u32 clrflashstatus;
 	u32 clrreadstatus;
+
+	u8 status;
+	bool codeword_fixup;
+	bool use_ecc;
+	bool bch_enabled;
 };
 
 /*
  * This data type corresponds to the NAND controller properties which varies
  * among different NAND controllers.
  * @ecc_modes - ecc mode for NAND
+ * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
  * @is_bam - whether NAND controller is using BAM
  * @is_qpic - whether NAND CTRL is part of qpic IP
  * @qpic_v2 - flag to indicate QPIC IP version 2
- * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
+ * @use_codeword_fixup - whether NAND has different layout for boot partitions
  */
 struct qcom_nandc_props {
 	u32 ecc_modes;
+	u32 dev_cmd_reg_start;
 	bool is_bam;
 	bool is_qpic;
 	bool qpic_v2;
-	u32 dev_cmd_reg_start;
+	bool use_codeword_fixup;
 };
 
 /* Frees the BAM transaction memory */
@@ -1701,7 +1749,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 	oob_size1 = host->bbm_size;
 
-	if (qcom_nandc_is_last_cw(ecc, cw)) {
+	if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) {
 		data_size2 = ecc->size - data_size1 -
 			     ((ecc->steps - 1) * 4);
 		oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
@@ -1782,7 +1830,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
 	}
 
 	for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
-		if (qcom_nandc_is_last_cw(ecc, cw)) {
+		if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) {
 			data_size = ecc->size - ((ecc->steps - 1) * 4);
 			oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
 		} else {
@@ -1940,7 +1988,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (qcom_nandc_is_last_cw(ecc, i)) {
+		if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2037,6 +2085,69 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
 	return ret;
 }
 
+static bool qcom_nandc_is_boot_partition(struct qcom_nand_host *host, int page)
+{
+	struct qcom_nand_boot_partition *boot_partition;
+	u32 start, end;
+	int i;
+
+	/*
+	 * Since the frequent access will be to the non-boot partitions like rootfs,
+	 * optimize the page check by:
+	 *
+	 * 1. Checking if the page lies after the last boot partition.
+	 * 2. Checking from the boot partition end.
+	 */
+
+	/* First check the last boot partition */
+	boot_partition = &host->boot_partitions[host->nr_boot_partitions - 1];
+	start = boot_partition->page_offset;
+	end = start + boot_partition->page_size;
+
+	/* Page is after the last boot partition end. This is NOT a boot partition */
+	if (page > end)
+		return false;
+
+	/* Actually check if it's a boot partition */
+	if (page < end && page >= start)
+		return true;
+
+	/* Check the other boot partitions starting from the second-last partition */
+	for (i = host->nr_boot_partitions - 2; i >= 0; i--) {
+		boot_partition = &host->boot_partitions[i];
+		start = boot_partition->page_offset;
+		end = start + boot_partition->page_size;
+
+		if (page < end && page >= start)
+			return true;
+	}
+
+	return false;
+}
+
+static void qcom_nandc_codeword_fixup(struct qcom_nand_host *host, int page)
+{
+	bool codeword_fixup = qcom_nandc_is_boot_partition(host, page);
+
+	/* Skip conf write if we are already in the correct mode */
+	if (codeword_fixup == host->codeword_fixup)
+		return;
+
+	host->codeword_fixup = codeword_fixup;
+
+	host->cw_data = codeword_fixup ? 512 : 516;
+	host->spare_bytes = host->cw_size - host->ecc_bytes_hw -
+			    host->bbm_size - host->cw_data;
+
+	host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK);
+	host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES |
+		      host->cw_data << UD_SIZE_BYTES;
+
+	host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK;
+	host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES;
+	host->ecc_buf_cfg = (host->cw_data - 1) << NUM_STEPS;
+}
+
 /* implements ecc->read_page() */
 static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
 				int oob_required, int page)
@@ -2045,6 +2156,9 @@ static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	u8 *data_buf, *oob_buf = NULL;
 
+	if (host->nr_boot_partitions)
+		qcom_nandc_codeword_fixup(host, page);
+
 	nand_read_page_op(chip, page, 0, NULL, 0);
 	data_buf = buf;
 	oob_buf = oob_required ? chip->oob_poi : NULL;
@@ -2064,6 +2178,9 @@ static int qcom_nandc_read_page_raw(struct nand_chip *chip, uint8_t *buf,
 	int cw, ret;
 	u8 *data_buf = buf, *oob_buf = chip->oob_poi;
 
+	if (host->nr_boot_partitions)
+		qcom_nandc_codeword_fixup(host, page);
+
 	for (cw = 0; cw < ecc->steps; cw++) {
 		ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf,
 					     page, cw);
@@ -2084,6 +2201,9 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
+	if (host->nr_boot_partitions)
+		qcom_nandc_codeword_fixup(host, page);
+
 	clear_read_regs(nandc);
 	clear_bam_transaction(nandc);
 
@@ -2104,6 +2224,9 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	u8 *data_buf, *oob_buf;
 	int i, ret;
 
+	if (host->nr_boot_partitions)
+		qcom_nandc_codeword_fixup(host, page);
+
 	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
 
 	clear_read_regs(nandc);
@@ -2119,7 +2242,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (qcom_nandc_is_last_cw(ecc, i)) {
+		if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2176,6 +2299,9 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 	u8 *data_buf, *oob_buf;
 	int i, ret;
 
+	if (host->nr_boot_partitions)
+		qcom_nandc_codeword_fixup(host, page);
+
 	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
 	clear_read_regs(nandc);
 	clear_bam_transaction(nandc);
@@ -2194,7 +2320,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 		data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 		oob_size1 = host->bbm_size;
 
-		if (qcom_nandc_is_last_cw(ecc, i)) {
+		if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
 			data_size2 = ecc->size - data_size1 -
 				     ((ecc->steps - 1) << 2);
 			oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
@@ -2254,6 +2380,9 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
 	int data_size, oob_size;
 	int ret;
 
+	if (host->nr_boot_partitions)
+		qcom_nandc_codeword_fixup(host, page);
+
 	host->use_ecc = true;
 	clear_bam_transaction(nandc);
 
@@ -2915,6 +3044,74 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
 
 static const char * const probes[] = { "cmdlinepart", "ofpart", "qcomsmem", NULL };
 
+static int qcom_nand_host_parse_boot_partitions(struct qcom_nand_controller *nandc,
+						struct qcom_nand_host *host,
+						struct device_node *dn)
+{
+	struct nand_chip *chip = &host->chip;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct qcom_nand_boot_partition *boot_partition;
+	struct device *dev = nandc->dev;
+	int partitions_count, i, j, ret;
+
+	if (!of_find_property(dn, "qcom,boot-partitions", NULL))
+		return 0;
+
+	partitions_count = of_property_count_u32_elems(dn, "qcom,boot-partitions");
+	if (partitions_count <= 0) {
+		dev_err(dev, "Error parsing boot partition\n");
+		return partitions_count ? partitions_count : -EINVAL;
+	}
+
+	host->nr_boot_partitions = partitions_count / 2;
+	host->boot_partitions = devm_kcalloc(dev, host->nr_boot_partitions,
+					     sizeof(*host->boot_partitions), GFP_KERNEL);
+	if (!host->boot_partitions) {
+		host->nr_boot_partitions = 0;
+		return -ENOMEM;
+	}
+
+	for (i = 0, j = 0; i < host->nr_boot_partitions; i++, j += 2) {
+		boot_partition = &host->boot_partitions[i];
+
+		ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j,
+						 &boot_partition->page_offset);
+		if (ret) {
+			dev_err(dev, "Error parsing boot partition offset at index %d\n", i);
+			host->nr_boot_partitions = 0;
+			return ret;
+		}
+
+		if (boot_partition->page_offset % mtd->writesize) {
+			dev_err(dev, "Boot partition offset not multiple of writesize at index %i\n",
+				i);
+			host->nr_boot_partitions = 0;
+			return -EINVAL;
+		}
+		/* Convert offset to nand pages */
+		boot_partition->page_offset /= mtd->writesize;
+
+		ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j + 1,
+						 &boot_partition->page_size);
+		if (ret) {
+			dev_err(dev, "Error parsing boot partition size at index %d\n", i);
+			host->nr_boot_partitions = 0;
+			return ret;
+		}
+
+		if (boot_partition->page_size % mtd->writesize) {
+			dev_err(dev, "Boot partition size not multiple of writesize at index %i\n",
+				i);
+			host->nr_boot_partitions = 0;
+			return -EINVAL;
+		}
+		/* Convert size to nand pages */
+		boot_partition->page_size /= mtd->writesize;
+	}
+
+	return 0;
+}
+
 static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 					    struct qcom_nand_host *host,
 					    struct device_node *dn)
@@ -2972,6 +3169,14 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	if (ret)
 		nand_cleanup(chip);
 
+	if (nandc->props->use_codeword_fixup) {
+		ret = qcom_nand_host_parse_boot_partitions(nandc, host, dn);
+		if (ret) {
+			nand_cleanup(chip);
+			return ret;
+		}
+	}
+
 	return ret;
 }
 
@@ -3137,6 +3342,7 @@ static int qcom_nandc_remove(struct platform_device *pdev)
 static const struct qcom_nandc_props ipq806x_nandc_props = {
 	.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
 	.is_bam = false,
+	.use_codeword_fixup = true,
 	.dev_cmd_reg_start = 0x0,
 };
 
diff --git a/drivers/mtd/nand/raw/sm_common.c b/drivers/mtd/nand/raw/sm_common.c
index ba24cb36d0b9..b2b42dd1a2de 100644
--- a/drivers/mtd/nand/raw/sm_common.c
+++ b/drivers/mtd/nand/raw/sm_common.c
@@ -52,7 +52,7 @@ static const struct mtd_ooblayout_ops oob_sm_ops = {
 	.free = oob_sm_ooblayout_free,
 };
 
-/* NOTE: This layout is is not compatabable with SmartMedia, */
+/* NOTE: This layout is not compatabable with SmartMedia, */
 /* because the 256 byte devices have page depenent oob layout */
 /* However it does preserve the bad block markers */
 /* If you use smftl, it will bypass this and work correctly */
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index b36e5260ae27..e12f9f580a15 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -1223,11 +1223,8 @@ static int tegra_nand_remove(struct platform_device *pdev)
 	struct tegra_nand_controller *ctrl = platform_get_drvdata(pdev);
 	struct nand_chip *chip = ctrl->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	int ret;
 
-	ret = mtd_device_unregister(mtd);
-	if (ret)
-		return ret;
+	WARN_ON(mtd_device_unregister(mtd));
 
 	nand_cleanup(chip);
 
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 80dabe6ff0f3..b520fe634041 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
+spinand-objs := core.o ato.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
 obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/ato.c b/drivers/mtd/nand/spi/ato.c
new file mode 100644
index 000000000000..82b377c06812
--- /dev/null
+++ b/drivers/mtd/nand/spi/ato.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Aidan MacDonald
+ *
+ * Author: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+
+#define SPINAND_MFR_ATO		0x9b
+
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+
+static int ato25d1ga_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = (16 * section) + 8;
+	region->length = 8;
+	return 0;
+}
+
+static int ato25d1ga_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	if (section) {
+		region->offset = (16 * section);
+		region->length = 8;
+	} else {
+		/* first byte of section 0 is reserved for the BBM */
+		region->offset = 1;
+		region->length = 7;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops ato25d1ga_ooblayout = {
+	.ecc = ato25d1ga_ooblayout_ecc,
+	.free = ato25d1ga_ooblayout_free,
+};
+
+
+static const struct spinand_info ato_spinand_table[] = {
+	SPINAND_INFO("ATO25D1GA",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x12),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(1, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&ato25d1ga_ooblayout, NULL)),
+};
+
+static const struct spinand_manufacturer_ops ato_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer ato_spinand_manufacturer = {
+	.id = SPINAND_MFR_ATO,
+	.name = "ATO",
+	.chips = ato_spinand_table,
+	.nchips = ARRAY_SIZE(ato_spinand_table),
+	.ops = &ato_spinand_manuf_ops,
+};
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index d5b685d1605e..9d73910a7ae8 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -927,6 +927,7 @@ static const struct nand_ops spinand_ops = {
 };
 
 static const struct spinand_manufacturer *spinand_manufacturers[] = {
+	&ato_spinand_manufacturer,
 	&gigadevice_spinand_manufacturer,
 	&macronix_spinand_manufacturer,
 	&micron_spinand_manufacturer,
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index 23763d16e4f9..b43df73927a0 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS
 	help
 	  This provides support for parsing partitions from Shared Memory (SMEM)
 	  for NAND and SPI flash on Qualcomm platforms.
+
+config MTD_SERCOMM_PARTS
+	tristate "Sercomm partition table parser"
+	depends on MTD && RALINK
+	help
+	  This provides partitions table parser for devices with Sercomm
+	  partition map. This partition table contains real partition
+	  offsets, which may differ from device to device depending on the
+	  number and location of bad blocks on NAND.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 2e98aa048278..2fcf0ab9e7da 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
 obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
 obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
 obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
+obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
 obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
 obj-$(CONFIG_MTD_QCOMSMEM_PARTS)	+= qcomsmempart.o
diff --git a/drivers/mtd/parsers/ofpart_bcm4908.c b/drivers/mtd/parsers/ofpart_bcm4908.c
index 0eddef4c198e..bb072a0940e4 100644
--- a/drivers/mtd/parsers/ofpart_bcm4908.c
+++ b/drivers/mtd/parsers/ofpart_bcm4908.c
@@ -35,12 +35,15 @@ static long long bcm4908_partitions_fw_offset(void)
 		err = kstrtoul(s + len + 1, 0, &offset);
 		if (err) {
 			pr_err("failed to parse %s\n", s + len + 1);
+			of_node_put(root);
 			return err;
 		}
 
+		of_node_put(root);
 		return offset << 10;
 	}
 
+	of_node_put(root);
 	return -ENOENT;
 }
 
diff --git a/drivers/mtd/parsers/redboot.c b/drivers/mtd/parsers/redboot.c
index feb44a573d44..a16b42a88581 100644
--- a/drivers/mtd/parsers/redboot.c
+++ b/drivers/mtd/parsers/redboot.c
@@ -58,6 +58,7 @@ static void parse_redboot_of(struct mtd_info *master)
 		return;
 
 	ret = of_property_read_u32(npart, "fis-index-block", &dirblock);
+	of_node_put(npart);
 	if (ret)
 		return;
 
diff --git a/drivers/mtd/parsers/scpart.c b/drivers/mtd/parsers/scpart.c
new file mode 100644
index 000000000000..02601bb33de4
--- /dev/null
+++ b/drivers/mtd/parsers/scpart.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *    drivers/mtd/scpart.c: Sercomm Partition Parser
+ *
+ *    Copyright (C) 2018 NOGUCHI Hiroshi
+ *    Copyright (C) 2022 Mikhail Zhilkin
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/module.h>
+
+#define	MOD_NAME	"scpart"
+
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+
+#define pr_fmt(fmt) MOD_NAME ": " fmt
+
+#define	ID_ALREADY_FOUND	0xffffffffUL
+
+#define	MAP_OFFS_IN_BLK		0x800
+#define	MAP_MIRROR_NUM		2
+
+static const char sc_part_magic[] = {
+	'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
+};
+#define	PART_MAGIC_LEN		sizeof(sc_part_magic)
+
+/* assumes that all fields are set by CPU native endian */
+struct sc_part_desc {
+	uint32_t	part_id;
+	uint32_t	part_offs;
+	uint32_t	part_bytes;
+};
+
+static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
+{
+	return ((pdesc->part_id != 0xffffffffUL) &&
+		(pdesc->part_offs != 0xffffffffUL) &&
+		(pdesc->part_bytes != 0xffffffffUL));
+}
+
+static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
+			       struct sc_part_desc **ppdesc)
+{
+	int cnt = 0;
+	int res = 0;
+	int res2;
+	loff_t offs;
+	size_t retlen;
+	struct sc_part_desc *pdesc = NULL;
+	struct sc_part_desc *tmpdesc;
+	uint8_t *buf;
+
+	buf = kzalloc(master->erasesize, GFP_KERNEL);
+	if (!buf) {
+		res = -ENOMEM;
+		goto out;
+	}
+
+	res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
+	if (res2 || retlen != master->erasesize) {
+		res = -EIO;
+		goto free;
+	}
+
+	for (offs = MAP_OFFS_IN_BLK;
+	     offs < master->erasesize - sizeof(*tmpdesc);
+	     offs += sizeof(*tmpdesc)) {
+		tmpdesc = (struct sc_part_desc *)&buf[offs];
+		if (!scpart_desc_is_valid(tmpdesc))
+			break;
+		cnt++;
+	}
+
+	if (cnt > 0) {
+		int bytes = cnt * sizeof(*pdesc);
+
+		pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
+		if (!pdesc) {
+			res = -ENOMEM;
+			goto free;
+		}
+		memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
+
+		*ppdesc = pdesc;
+		res = cnt;
+	}
+
+free:
+	kfree(buf);
+
+out:
+	return res;
+}
+
+static int scpart_find_partmap(struct mtd_info *master,
+			       struct sc_part_desc **ppdesc)
+{
+	int magic_found = 0;
+	int res = 0;
+	int res2;
+	loff_t offs = 0;
+	size_t retlen;
+	uint8_t rdbuf[PART_MAGIC_LEN];
+
+	while ((magic_found < MAP_MIRROR_NUM) &&
+			(offs < master->size) &&
+			 !mtd_block_isbad(master, offs)) {
+		res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
+		if (res2 || retlen != PART_MAGIC_LEN) {
+			res = -EIO;
+			goto out;
+		}
+		if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
+			pr_debug("Signature found at 0x%llx\n", offs);
+			magic_found++;
+			res = scpart_scan_partmap(master, offs, ppdesc);
+			if (res > 0)
+				goto out;
+		}
+		offs += master->erasesize;
+	}
+
+out:
+	if (res > 0)
+		pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
+	else
+		pr_info("No valid 'SC PART MAP' was found\n");
+
+	return res;
+}
+
+static int scpart_parse(struct mtd_info *master,
+			const struct mtd_partition **pparts,
+			struct mtd_part_parser_data *data)
+{
+	const char *partname;
+	int n;
+	int nr_scparts;
+	int nr_parts = 0;
+	int res = 0;
+	struct sc_part_desc *scpart_map = NULL;
+	struct mtd_partition *parts = NULL;
+	struct device_node *mtd_node;
+	struct device_node *ofpart_node;
+	struct device_node *pp;
+
+	mtd_node = mtd_get_of_node(master);
+	if (!mtd_node) {
+		res = -ENOENT;
+		goto out;
+	}
+
+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
+	if (!ofpart_node) {
+		pr_info("%s: 'partitions' subnode not found on %pOF.\n",
+				master->name, mtd_node);
+		res = -ENOENT;
+		goto out;
+	}
+
+	nr_scparts = scpart_find_partmap(master, &scpart_map);
+	if (nr_scparts <= 0) {
+		pr_info("No any partitions was found in 'SC PART MAP'.\n");
+		res = -ENOENT;
+		goto free;
+	}
+
+	parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
+		GFP_KERNEL);
+	if (!parts) {
+		res = -ENOMEM;
+		goto free;
+	}
+
+	for_each_child_of_node(ofpart_node, pp) {
+		u32 scpart_id;
+
+		if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
+			continue;
+
+		for (n = 0 ; n < nr_scparts ; n++)
+			if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
+					(scpart_id == scpart_map[n].part_id))
+				break;
+		if (n >= nr_scparts)
+			/* not match */
+			continue;
+
+		/* add the partition found in OF into MTD partition array */
+		parts[nr_parts].offset = scpart_map[n].part_offs;
+		parts[nr_parts].size = scpart_map[n].part_bytes;
+		parts[nr_parts].of_node = pp;
+
+		if (!of_property_read_string(pp, "label", &partname))
+			parts[nr_parts].name = partname;
+		if (of_property_read_bool(pp, "read-only"))
+			parts[nr_parts].mask_flags |= MTD_WRITEABLE;
+		if (of_property_read_bool(pp, "lock"))
+			parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
+
+		/* mark as 'done' */
+		scpart_map[n].part_id = ID_ALREADY_FOUND;
+
+		nr_parts++;
+	}
+
+	if (nr_parts > 0) {
+		*pparts = parts;
+		res = nr_parts;
+	} else
+		pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
+
+	of_node_put(pp);
+
+free:
+	of_node_put(ofpart_node);
+	kfree(scpart_map);
+	if (res <= 0)
+		kfree(parts);
+
+out:
+	return res;
+}
+
+static const struct of_device_id scpart_parser_of_match_table[] = {
+	{ .compatible = "sercomm,sc-partitions" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
+
+static struct mtd_part_parser scpart_parser = {
+	.parse_fn = scpart_parse,
+	.name = "scpart",
+	.of_match_table = scpart_parser_of_match_table,
+};
+module_mtd_part_parser(scpart_parser);
+
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("scpart");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
+MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
+MODULE_DESCRIPTION("Sercomm partition parser");
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 0cff2cda1b5a..7f955fade838 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -1111,9 +1111,9 @@ static void sm_release(struct mtd_blktrans_dev *dev)
 {
 	struct sm_ftl *ftl = dev->priv;
 
-	mutex_lock(&ftl->mutex);
 	del_timer_sync(&ftl->timer);
 	cancel_work_sync(&ftl->flush_work);
+	mutex_lock(&ftl->mutex);
 	sm_cache_flush(ftl);
 	mutex_unlock(&ftl->mutex);
 }
diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
index 94a969185ceb..5070d72835ec 100644
--- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -237,7 +237,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
 	reg = readl(host->regbase + FMC_CFG);
 	reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK);
 	reg |= FMC_CFG_OP_MODE_NORMAL;
-	reg |= (nor->addr_width == 4) ? SPI_NOR_ADDR_MODE_4BYTES
+	reg |= (nor->addr_nbytes == 4) ? SPI_NOR_ADDR_MODE_4BYTES
 		: SPI_NOR_ADDR_MODE_3BYTES;
 	writel(reg, host->regbase + FMC_CFG);
 
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 9032b9ab2eaf..ab3990e6ac25 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -203,7 +203,7 @@ static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
 	      SPIFI_CMD_DATALEN(len) |
 	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
 	      SPIFI_CMD_OPCODE(nor->program_opcode) |
-	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
 	writel(cmd, spifi->io_base + SPIFI_CMD);
 
 	for (i = 0; i < len; i++)
@@ -230,7 +230,7 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
 
 	cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
 	      SPIFI_CMD_OPCODE(nor->erase_opcode) |
-	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
 	writel(cmd, spifi->io_base + SPIFI_CMD);
 
 	return nxp_spifi_wait_for_cmd(spifi);
@@ -252,12 +252,12 @@ static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
 	}
 
 	/* Memory mode supports address length between 1 and 4 */
-	if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
+	if (spifi->nor.addr_nbytes < 1 || spifi->nor.addr_nbytes > 4)
 		return -EINVAL;
 
 	spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
 		       SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
-		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
 
 	return 0;
 }
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 502967c76c5f..f2c64006f8d7 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -38,7 +38,7 @@
  */
 #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
 
-#define SPI_NOR_MAX_ADDR_WIDTH	4
+#define SPI_NOR_MAX_ADDR_NBYTES	4
 
 #define SPI_NOR_SRST_SLEEP_MIN 200
 #define SPI_NOR_SRST_SLEEP_MAX 400
@@ -177,7 +177,7 @@ int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode,
 
 static int spi_nor_controller_ops_erase(struct spi_nor *nor, loff_t offs)
 {
-	if (spi_nor_protocol_is_dtr(nor->write_proto))
+	if (spi_nor_protocol_is_dtr(nor->reg_proto))
 		return -EOPNOTSUPP;
 
 	return nor->controller_ops->erase(nor, offs);
@@ -198,7 +198,7 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
 {
 	struct spi_mem_op op =
 		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
-			   SPI_MEM_OP_ADDR(nor->addr_width, from, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_nbytes, from, 0),
 			   SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
 			   SPI_MEM_OP_DATA_IN(len, buf, 0));
 	bool usebouncebuf;
@@ -262,7 +262,7 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
 {
 	struct spi_mem_op op =
 		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
-			   SPI_MEM_OP_ADDR(nor->addr_width, to, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_nbytes, to, 0),
 			   SPI_MEM_OP_NO_DUMMY,
 			   SPI_MEM_OP_DATA_OUT(len, buf, 0));
 	ssize_t nbytes;
@@ -972,7 +972,7 @@ static int spi_nor_erase_chip(struct spi_nor *nor)
 	if (nor->spimem) {
 		struct spi_mem_op op = SPI_NOR_CHIP_ERASE_OP;
 
-		spi_nor_spimem_setup_op(nor, &op, nor->write_proto);
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
 
 		ret = spi_mem_exec_op(nor->spimem, &op);
 	} else {
@@ -1113,9 +1113,9 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
 	if (nor->spimem) {
 		struct spi_mem_op op =
 			SPI_NOR_SECTOR_ERASE_OP(nor->erase_opcode,
-						nor->addr_width, addr);
+						nor->addr_nbytes, addr);
 
-		spi_nor_spimem_setup_op(nor, &op, nor->write_proto);
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
 
 		return spi_mem_exec_op(nor->spimem, &op);
 	} else if (nor->controller_ops->erase) {
@@ -1126,13 +1126,13 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
 	 * Default implementation, if driver doesn't have a specialized HW
 	 * control
 	 */
-	for (i = nor->addr_width - 1; i >= 0; i--) {
+	for (i = nor->addr_nbytes - 1; i >= 0; i--) {
 		nor->bouncebuf[i] = addr & 0xff;
 		addr >>= 8;
 	}
 
 	return spi_nor_controller_ops_write_reg(nor, nor->erase_opcode,
-						nor->bouncebuf, nor->addr_width);
+						nor->bouncebuf, nor->addr_nbytes);
 }
 
 /**
@@ -2249,43 +2249,43 @@ static int spi_nor_default_setup(struct spi_nor *nor,
 	return 0;
 }
 
-static int spi_nor_set_addr_width(struct spi_nor *nor)
+static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
 {
-	if (nor->addr_width) {
-		/* already configured from SFDP */
+	if (nor->params->addr_nbytes) {
+		nor->addr_nbytes = nor->params->addr_nbytes;
 	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
 		/*
 		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
-		 * in this protocol an odd address width cannot be used because
+		 * in this protocol an odd addr_nbytes cannot be used because
 		 * then the address phase would only span a cycle and a half.
 		 * Half a cycle would be left over. We would then have to start
 		 * the dummy phase in the middle of a cycle and so too the data
 		 * phase, and we will end the transaction with half a cycle left
 		 * over.
 		 *
-		 * Force all 8D-8D-8D flashes to use an address width of 4 to
+		 * Force all 8D-8D-8D flashes to use an addr_nbytes of 4 to
 		 * avoid this situation.
 		 */
-		nor->addr_width = 4;
-	} else if (nor->info->addr_width) {
-		nor->addr_width = nor->info->addr_width;
+		nor->addr_nbytes = 4;
+	} else if (nor->info->addr_nbytes) {
+		nor->addr_nbytes = nor->info->addr_nbytes;
 	} else {
-		nor->addr_width = 3;
+		nor->addr_nbytes = 3;
 	}
 
-	if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
+	if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) {
 		/* enable 4-byte addressing if the device exceeds 16MiB */
-		nor->addr_width = 4;
+		nor->addr_nbytes = 4;
 	}
 
-	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
-		dev_dbg(nor->dev, "address width is too large: %u\n",
-			nor->addr_width);
+	if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) {
+		dev_dbg(nor->dev, "The number of address bytes is too large: %u\n",
+			nor->addr_nbytes);
 		return -EINVAL;
 	}
 
 	/* Set 4byte opcodes when possible. */
-	if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+	if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES &&
 	    !(nor->flags & SNOR_F_HAS_4BAIT))
 		spi_nor_set_4byte_opcodes(nor);
 
@@ -2304,7 +2304,7 @@ static int spi_nor_setup(struct spi_nor *nor,
 	if (ret)
 		return ret;
 
-	return spi_nor_set_addr_width(nor);
+	return spi_nor_set_addr_nbytes(nor);
 }
 
 /**
@@ -2382,12 +2382,7 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 	 */
 	erase_mask = 0;
 	i = 0;
-	if (no_sfdp_flags & SECT_4K_PMC) {
-		erase_mask |= BIT(i);
-		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-				       SPINOR_OP_BE_4K_PMC);
-		i++;
-	} else if (no_sfdp_flags & SECT_4K) {
+	if (no_sfdp_flags & SECT_4K) {
 		erase_mask |= BIT(i);
 		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
 				       SPINOR_OP_BE_4K);
@@ -2497,7 +2492,6 @@ static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
 
 	if (spi_nor_parse_sfdp(nor)) {
 		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
-		nor->addr_width = 0;
 		nor->flags &= ~SNOR_F_4B_OPCODES;
 	}
 }
@@ -2718,7 +2712,7 @@ static int spi_nor_init(struct spi_nor *nor)
 	     nor->flags & SNOR_F_SWP_IS_VOLATILE))
 		spi_nor_try_unlock_all(nor);
 
-	if (nor->addr_width == 4 &&
+	if (nor->addr_nbytes == 4 &&
 	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
 	    !(nor->flags & SNOR_F_4B_OPCODES)) {
 		/*
@@ -2730,7 +2724,7 @@ static int spi_nor_init(struct spi_nor *nor)
 		 */
 		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
 			  "enabling reset hack; may not recover from unexpected reboots\n");
-		nor->params->set_4byte_addr_mode(nor, true);
+		return nor->params->set_4byte_addr_mode(nor, true);
 	}
 
 	return 0;
@@ -2845,7 +2839,7 @@ static void spi_nor_put_device(struct mtd_info *mtd)
 void spi_nor_restore(struct spi_nor *nor)
 {
 	/* restore the addressing mode */
-	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
+	if (nor->addr_nbytes == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
 	    nor->flags & SNOR_F_BROKEN_RESET)
 		nor->params->set_4byte_addr_mode(nor, false);
 
@@ -2989,7 +2983,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
 	 * - set the number of dummy cycles (mode cycles + wait states).
 	 * - set the SPI protocols for register and memory accesses.
-	 * - set the address width.
+	 * - set the number of address bytes.
 	 */
 	ret = spi_nor_setup(nor, hwcaps);
 	if (ret)
@@ -3030,7 +3024,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
 {
 	struct spi_mem_dirmap_info info = {
 		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
-				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+				      SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
 				      SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
 				      SPI_MEM_OP_DATA_IN(0, NULL, 0)),
 		.offset = 0,
@@ -3061,7 +3055,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
 {
 	struct spi_mem_dirmap_info info = {
 		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
-				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+				      SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
 				      SPI_MEM_OP_NO_DUMMY,
 				      SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
 		.offset = 0,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 3f841ec36e56..85b0cf254e97 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -84,9 +84,9 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
-#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_width, addr)		\
+#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr)		\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
-		   SPI_MEM_OP_ADDR(addr_width, addr, 0),		\
+		   SPI_MEM_OP_ADDR(addr_nbytes, addr, 0),		\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
@@ -340,6 +340,11 @@ struct spi_nor_otp {
  * @writesize		Minimal writable flash unit size. Defaults to 1. Set to
  *			ECC unit size for ECC-ed flashes.
  * @page_size:		the page size of the SPI NOR flash memory.
+ * @addr_nbytes:	number of address bytes to send.
+ * @addr_mode_nbytes:	number of address bytes of current address mode. Useful
+ *			when the flash operates with 4B opcodes but needs the
+ *			internal address mode for opcodes that don't have a 4B
+ *			opcode correspondent.
  * @rdsr_dummy:		dummy cycles needed for Read Status Register command
  *			in octal DTR mode.
  * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
@@ -372,6 +377,8 @@ struct spi_nor_flash_parameter {
 	u64				size;
 	u32				writesize;
 	u32				page_size;
+	u8				addr_nbytes;
+	u8				addr_mode_nbytes;
 	u8				rdsr_dummy;
 	u8				rdsr_addr_nbytes;
 
@@ -429,7 +436,7 @@ struct spi_nor_fixups {
  *                  isn't necessarily called a "sector" by the vendor.
  * @n_sectors:      the number of sectors.
  * @page_size:      the flash's page size.
- * @addr_width:     the flash's address width.
+ * @addr_nbytes:    number of address bytes to send.
  *
  * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
  *                  meaning. If one wants to skip the SFDP tables, one should
@@ -457,7 +464,6 @@ struct spi_nor_fixups {
  *                  flags are used together with the SPI_NOR_SKIP_SFDP flag.
  *   SPI_NOR_SKIP_SFDP:       skip parsing of SFDP tables.
  *   SECT_4K:                 SPINOR_OP_BE_4K works uniformly.
- *   SECT_4K_PMC:             SPINOR_OP_BE_4K_PMC works uniformly.
  *   SPI_NOR_DUAL_READ:       flash supports Dual Read.
  *   SPI_NOR_QUAD_READ:       flash supports Quad Read.
  *   SPI_NOR_OCTAL_READ:      flash supports Octal Read.
@@ -488,7 +494,7 @@ struct flash_info {
 	unsigned sector_size;
 	u16 n_sectors;
 	u16 page_size;
-	u16 addr_width;
+	u8 addr_nbytes;
 
 	bool parse_sfdp;
 	u16 flags;
@@ -505,7 +511,6 @@ struct flash_info {
 	u8 no_sfdp_flags;
 #define SPI_NOR_SKIP_SFDP		BIT(0)
 #define SECT_4K				BIT(1)
-#define SECT_4K_PMC			BIT(2)
 #define SPI_NOR_DUAL_READ		BIT(3)
 #define SPI_NOR_QUAD_READ		BIT(4)
 #define SPI_NOR_OCTAL_READ		BIT(5)
@@ -550,11 +555,11 @@ struct flash_info {
 		.n_sectors = (_n_sectors),				\
 		.page_size = 256,					\
 
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width)	\
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
-		.addr_width = (_addr_width),				\
+		.addr_nbytes = (_addr_nbytes),				\
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
 #define OTP_INFO(_len, _n_regions, _base, _offset)			\
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index eaf84f7a0676..df76cb5de3f9 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -86,7 +86,7 @@ static int spi_nor_params_show(struct seq_file *s, void *data)
 	seq_printf(s, "size\t\t%s\n", buf);
 	seq_printf(s, "write size\t%u\n", params->writesize);
 	seq_printf(s, "page size\t%u\n", params->page_size);
-	seq_printf(s, "address width\t%u\n", nor->addr_width);
+	seq_printf(s, "address nbytes\t%u\n", nor->addr_nbytes);
 
 	seq_puts(s, "flags\t\t");
 	spi_nor_print_flags(s, nor->flags, snor_f_names, sizeof(snor_f_names));
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index 79e2408f4998..fcc3b0e7cda9 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -13,7 +13,7 @@ static const struct flash_info esmt_nor_parts[] = {
 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
 		NO_SFDP_FLAGS(SECT_4K) },
-	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64)
+	{ "f25l32qa-2s", INFO(0x8c4116, 0, 64 * 1024, 64)
 		FLAGS(SPI_NOR_HAS_LOCK)
 		NO_SFDP_FLAGS(SECT_4K) },
 	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index c012bc2486e1..89a66a19d754 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -14,13 +14,13 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor,
 			   const struct sfdp_bfpt *bfpt)
 {
 	/*
-	 * IS25LP256 supports 4B opcodes, but the BFPT advertises a
-	 * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
-	 * Overwrite the address width advertised by the BFPT.
+	 * IS25LP256 supports 4B opcodes, but the BFPT advertises
+	 * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY.
+	 * Overwrite the number of address bytes advertised by the BFPT.
 	 */
 	if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
 		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
-		nor->addr_width = 4;
+		nor->params->addr_nbytes = 4;
 
 	return 0;
 }
@@ -29,6 +29,21 @@ static const struct spi_nor_fixups is25lp256_fixups = {
 	.post_bfpt = is25lp256_post_bfpt_fixups,
 };
 
+static void pm25lv_nor_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
+	int i;
+
+	/* The PM25LV series has a different 4k sector erase opcode */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (map->erase_type[i].size == 4096)
+			map->erase_type[i].opcode = SPINOR_OP_BE_4K_PMC;
+}
+
+static const struct spi_nor_fixups pm25lv_nor_fixups = {
+	.late_init = pm25lv_nor_late_init,
+};
+
 static const struct flash_info issi_nor_parts[] = {
 	/* ISSI */
 	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2)
@@ -62,9 +77,13 @@ static const struct flash_info issi_nor_parts[] = {
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2)
-		NO_SFDP_FLAGS(SECT_4K_PMC) },
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &pm25lv_nor_fixups
+	},
 	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4)
-		NO_SFDP_FLAGS(SECT_4K_PMC) },
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &pm25lv_nor_fixups
+	},
 	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64)
 		NO_SFDP_FLAGS(SECT_4K) },
 };
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index a96f74e0f568..3c9681a3f7a3 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -399,8 +399,16 @@ static int micron_st_nor_ready(struct spi_nor *nor)
 		return sr_ready;
 
 	ret = micron_st_nor_read_fsr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
+	if (ret) {
+		/*
+		 * Some controllers, such as Intel SPI, do not support low
+		 * level operations such as reading the flag status
+		 * register. They only expose small amount of high level
+		 * operations to the software. If this is the case we use
+		 * only the status register value.
+		 */
+		return ret == -EOPNOTSUPP ? sr_ready : ret;
+	}
 
 	if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
 		if (nor->bouncebuf[0] & FSR_E_ERR)
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index fa63d8571218..00ab0d2d6d2f 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -35,13 +35,13 @@
  */
 int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
 {
-	u8 addr_width, read_opcode, read_dummy;
+	u8 addr_nbytes, read_opcode, read_dummy;
 	struct spi_mem_dirmap_desc *rdesc;
 	enum spi_nor_protocol read_proto;
 	int ret;
 
 	read_opcode = nor->read_opcode;
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	read_dummy = nor->read_dummy;
 	read_proto = nor->read_proto;
 	rdesc = nor->dirmap.rdesc;
@@ -54,7 +54,7 @@ int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
 	ret = spi_nor_read_data(nor, addr, len, buf);
 
 	nor->read_opcode = read_opcode;
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->read_dummy = read_dummy;
 	nor->read_proto = read_proto;
 	nor->dirmap.rdesc = rdesc;
@@ -85,11 +85,11 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
 {
 	enum spi_nor_protocol write_proto;
 	struct spi_mem_dirmap_desc *wdesc;
-	u8 addr_width, program_opcode;
+	u8 addr_nbytes, program_opcode;
 	int ret, written;
 
 	program_opcode = nor->program_opcode;
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	write_proto = nor->write_proto;
 	wdesc = nor->dirmap.wdesc;
 
@@ -113,7 +113,7 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
 
 out:
 	nor->program_opcode = program_opcode;
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->write_proto = write_proto;
 	nor->dirmap.wdesc = wdesc;
 
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index a5211543d30d..2257f1b4c2e2 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -134,7 +134,7 @@ struct sfdp_4bait {
 
 /**
  * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
- *			addr_width and read_dummy members of the struct spi_nor
+ *			addr_nbytes and read_dummy members of the struct spi_nor
  *			should be previously
  * set.
  * @nor:	pointer to a 'struct spi_nor'
@@ -178,21 +178,21 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
 static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
 			     size_t len, void *buf)
 {
-	u8 addr_width, read_opcode, read_dummy;
+	u8 addr_nbytes, read_opcode, read_dummy;
 	int ret;
 
 	read_opcode = nor->read_opcode;
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	read_dummy = nor->read_dummy;
 
 	nor->read_opcode = SPINOR_OP_RDSFDP;
-	nor->addr_width = 3;
+	nor->addr_nbytes = 3;
 	nor->read_dummy = 8;
 
 	ret = spi_nor_read_raw(nor, addr, len, buf);
 
 	nor->read_opcode = read_opcode;
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->read_dummy = read_dummy;
 
 	return ret;
@@ -462,11 +462,13 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
 	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
 	case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
-		nor->addr_width = 3;
+		params->addr_nbytes = 3;
+		params->addr_mode_nbytes = 3;
 		break;
 
 	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
-		nor->addr_width = 4;
+		params->addr_nbytes = 4;
+		params->addr_mode_nbytes = 4;
 		break;
 
 	default:
@@ -637,12 +639,12 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 }
 
 /**
- * spi_nor_smpt_addr_width() - return the address width used in the
+ * spi_nor_smpt_addr_nbytes() - return the number of address bytes used in the
  *			       configuration detection command.
  * @nor:	pointer to a 'struct spi_nor'
  * @settings:	configuration detection command descriptor, dword1
  */
-static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
+static u8 spi_nor_smpt_addr_nbytes(const struct spi_nor *nor, const u32 settings)
 {
 	switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
 	case SMPT_CMD_ADDRESS_LEN_0:
@@ -653,7 +655,7 @@ static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
 		return 4;
 	case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
 	default:
-		return nor->addr_width;
+		return nor->params->addr_mode_nbytes;
 	}
 }
 
@@ -690,7 +692,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	u32 addr;
 	int err;
 	u8 i;
-	u8 addr_width, read_opcode, read_dummy;
+	u8 addr_nbytes, read_opcode, read_dummy;
 	u8 read_data_mask, map_id;
 
 	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
@@ -698,7 +700,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	if (!buf)
 		return ERR_PTR(-ENOMEM);
 
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	read_dummy = nor->read_dummy;
 	read_opcode = nor->read_opcode;
 
@@ -709,7 +711,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 			break;
 
 		read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
-		nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+		nor->addr_nbytes = spi_nor_smpt_addr_nbytes(nor, smpt[i]);
 		nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
 		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
 		addr = smpt[i + 1];
@@ -756,7 +758,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	/* fall through */
 out:
 	kfree(buf);
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->read_dummy = read_dummy;
 	nor->read_opcode = read_opcode;
 	return ret;
@@ -1044,7 +1046,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 	/*
 	 * We need at least one 4-byte op code per read, program and erase
 	 * operation; the .read(), .write() and .erase() hooks share the
-	 * nor->addr_width value.
+	 * nor->addr_nbytes value.
 	 */
 	if (!read_hwcaps || !pp_hwcaps || !erase_mask)
 		goto out;
@@ -1098,7 +1100,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 	 * Spansion memory. However this quirk is no longer needed with new
 	 * SFDP compliant memories.
 	 */
-	nor->addr_width = 4;
+	params->addr_nbytes = 4;
 	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
 
 	/* fall through */
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 43cd6cd92537..0150049007be 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -14,6 +14,8 @@
 #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
+#define SPINOR_REG_CYPRESS_CFR1V		0x00800002
+#define SPINOR_REG_CYPRESS_CFR1V_QUAD_EN	BIT(1)	/* Quad Enable */
 #define SPINOR_REG_CYPRESS_CFR2V		0x00800003
 #define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR3V		0x00800004
@@ -114,6 +116,150 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 }
 
 /**
+ * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile
+ *                                      register.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * It is recommended to update volatile registers in the field application due
+ * to a risk of the non-volatile registers corruption by power interrupt. This
+ * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable
+ * bit in the CFR1 non-volatile in advance (typically by a Flash programmer
+ * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is
+ * also set during Flash power-up.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
+	u8 cfr1v_written;
+	int ret;
+
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR1V,
+					  nor->bouncebuf);
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1V_QUAD_EN)
+		return 0;
+
+	/* Update the Quad Enable bit. */
+	nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1V_QUAD_EN;
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR1V, 1,
+					  nor->bouncebuf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	cfr1v_written = nor->bouncebuf[0];
+
+	/* Read back and check it. */
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR1V,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] != cfr1v_written) {
+		dev_err(nor->dev, "CFR1: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * cypress_nor_set_page_size() - Set page size which corresponds to the flash
+ *                               configuration.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * The BFPT table advertises a 512B or 256B page size depending on part but the
+ * page size is actually configurable (with the default being 256B). Read from
+ * CFR3V[4] and set the correct size.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_set_page_size(struct spi_nor *nor)
+{
+	struct spi_mem_op op =
+		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
+					  nor->bouncebuf);
+	int ret;
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
+		nor->params->page_size = 512;
+	else
+		nor->params->page_size = 256;
+
+	return 0;
+}
+
+static int
+s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
+			const struct sfdp_parameter_header *bfpt_header,
+			const struct sfdp_bfpt *bfpt)
+{
+	/* Replace Quad Enable with volatile version */
+	nor->params->quad_enable = cypress_nor_quad_enable_volatile;
+
+	return cypress_nor_set_page_size(nor);
+}
+
+static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
+{
+	struct spi_nor_erase_type *erase_type =
+					nor->params->erase_map.erase_type;
+	unsigned int i;
+
+	/*
+	 * In some parts, 3byte erase opcodes are advertised by 4BAIT.
+	 * Convert them to 4byte erase opcodes.
+	 */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		switch (erase_type[i].opcode) {
+		case SPINOR_OP_SE:
+			erase_type[i].opcode = SPINOR_OP_SE_4B;
+			break;
+		case SPINOR_OP_BE_4K:
+			erase_type[i].opcode = SPINOR_OP_BE_4K_4B;
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void s25hx_t_late_init(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	/* Fast Read 4B requires mode cycles */
+	params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+
+	/* The writesize should be ECC data unit size */
+	params->writesize = 16;
+}
+
+static struct spi_nor_fixups s25hx_t_fixups = {
+	.post_bfpt = s25hx_t_post_bfpt_fixup,
+	.post_sfdp = s25hx_t_post_sfdp_fixup,
+	.late_init = s25hx_t_late_init,
+};
+
+/**
  * cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes.
  * @nor:		pointer to a 'struct spi_nor'
  * @enable:              whether to enable or disable Octal DTR
@@ -167,28 +313,7 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor,
 				     const struct sfdp_parameter_header *bfpt_header,
 				     const struct sfdp_bfpt *bfpt)
 {
-	/*
-	 * The BFPT table advertises a 512B page size but the page size is
-	 * actually configurable (with the default being 256B). Read from
-	 * CFR3V[4] and set the correct size.
-	 */
-	struct spi_mem_op op =
-		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
-					  nor->bouncebuf);
-	int ret;
-
-	spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
-	ret = spi_mem_exec_op(nor->spimem, &op);
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
-		nor->params->page_size = 512;
-	else
-		nor->params->page_size = 256;
-
-	return 0;
+	return cypress_nor_set_page_size(nor);
 }
 
 static const struct spi_nor_fixups s28hs512t_fixups = {
@@ -310,6 +435,22 @@ static const struct flash_info spansion_nor_parts[] = {
 	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
 	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
 		FLAGS(SPI_NOR_NO_ERASE) },
 	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256)
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 1d2f5db047bd..5723157739fc 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -31,7 +31,7 @@
 		.sector_size = (8 * (_page_size)),			\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
-		.addr_width = 3,					\
+		.addr_nbytes = 3,					\
 		.flags = SPI_NOR_NO_FR
 
 /* Xilinx S3AN share MFR with Atmel SPI NOR */