mtd: nand: move raw NAND related code to the raw/ subdir

As part of the process of sharing more code between different NAND
based devices, we need to move all raw NAND related code to the raw/
subdirectory.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

1 files changed, 0 insertions, 835 deletions

diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
deleted file mode 100644
index 5d7a1f8f580f..000000000000
--- a/drivers/mtd/nand/vf610_nfc.c
+++ /dev/null
@@ -1,835 +0,0 @@
-/*
- * Copyright 2009-2015 Freescale Semiconductor, Inc. and others
- *
- * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
- * Jason ported to M54418TWR and MVFA5 (VF610).
- * Authors: Stefan Agner <stefan.agner@toradex.com>
- *          Bill Pringlemeir <bpringlemeir@nbsps.com>
- *          Shaohui Xie <b21989@freescale.com>
- *          Jason Jin <Jason.jin@freescale.com>
- *
- * Based on original driver mpc5121_nfc.c.
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Limitations:
- * - Untested on MPC5125 and M54418.
- * - DMA and pipelining not used.
- * - 2K pages or less.
- * - HW ECC: Only 2K page with 64+ OOB.
- * - HW ECC: Only 24 and 32-bit error correction implemented.
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#define	DRV_NAME		"vf610_nfc"
-
-/* Register Offsets */
-#define NFC_FLASH_CMD1			0x3F00
-#define NFC_FLASH_CMD2			0x3F04
-#define NFC_COL_ADDR			0x3F08
-#define NFC_ROW_ADDR			0x3F0c
-#define NFC_ROW_ADDR_INC		0x3F14
-#define NFC_FLASH_STATUS1		0x3F18
-#define NFC_FLASH_STATUS2		0x3F1c
-#define NFC_CACHE_SWAP			0x3F28
-#define NFC_SECTOR_SIZE			0x3F2c
-#define NFC_FLASH_CONFIG		0x3F30
-#define NFC_IRQ_STATUS			0x3F38
-
-/* Addresses for NFC MAIN RAM BUFFER areas */
-#define NFC_MAIN_AREA(n)		((n) *  0x1000)
-
-#define PAGE_2K				0x0800
-#define OOB_64				0x0040
-#define OOB_MAX				0x0100
-
-/*
- * NFC_CMD2[CODE] values. See section:
- *  - 31.4.7 Flash Command Code Description, Vybrid manual
- *  - 23.8.6 Flash Command Sequencer, MPC5125 manual
- *
- * Briefly these are bitmasks of controller cycles.
- */
-#define READ_PAGE_CMD_CODE		0x7EE0
-#define READ_ONFI_PARAM_CMD_CODE	0x4860
-#define PROGRAM_PAGE_CMD_CODE		0x7FC0
-#define ERASE_CMD_CODE			0x4EC0
-#define READ_ID_CMD_CODE		0x4804
-#define RESET_CMD_CODE			0x4040
-#define STATUS_READ_CMD_CODE		0x4068
-
-/* NFC ECC mode define */
-#define ECC_BYPASS			0
-#define ECC_45_BYTE			6
-#define ECC_60_BYTE			7
-
-/*** Register Mask and bit definitions */
-
-/* NFC_FLASH_CMD1 Field */
-#define CMD_BYTE2_MASK				0xFF000000
-#define CMD_BYTE2_SHIFT				24
-
-/* NFC_FLASH_CM2 Field */
-#define CMD_BYTE1_MASK				0xFF000000
-#define CMD_BYTE1_SHIFT				24
-#define CMD_CODE_MASK				0x00FFFF00
-#define CMD_CODE_SHIFT				8
-#define BUFNO_MASK				0x00000006
-#define BUFNO_SHIFT				1
-#define START_BIT				BIT(0)
-
-/* NFC_COL_ADDR Field */
-#define COL_ADDR_MASK				0x0000FFFF
-#define COL_ADDR_SHIFT				0
-
-/* NFC_ROW_ADDR Field */
-#define ROW_ADDR_MASK				0x00FFFFFF
-#define ROW_ADDR_SHIFT				0
-#define ROW_ADDR_CHIP_SEL_RB_MASK		0xF0000000
-#define ROW_ADDR_CHIP_SEL_RB_SHIFT		28
-#define ROW_ADDR_CHIP_SEL_MASK			0x0F000000
-#define ROW_ADDR_CHIP_SEL_SHIFT			24
-
-/* NFC_FLASH_STATUS2 Field */
-#define STATUS_BYTE1_MASK			0x000000FF
-
-/* NFC_FLASH_CONFIG Field */
-#define CONFIG_ECC_SRAM_ADDR_MASK		0x7FC00000
-#define CONFIG_ECC_SRAM_ADDR_SHIFT		22
-#define CONFIG_ECC_SRAM_REQ_BIT			BIT(21)
-#define CONFIG_DMA_REQ_BIT			BIT(20)
-#define CONFIG_ECC_MODE_MASK			0x000E0000
-#define CONFIG_ECC_MODE_SHIFT			17
-#define CONFIG_FAST_FLASH_BIT			BIT(16)
-#define CONFIG_16BIT				BIT(7)
-#define CONFIG_BOOT_MODE_BIT			BIT(6)
-#define CONFIG_ADDR_AUTO_INCR_BIT		BIT(5)
-#define CONFIG_BUFNO_AUTO_INCR_BIT		BIT(4)
-#define CONFIG_PAGE_CNT_MASK			0xF
-#define CONFIG_PAGE_CNT_SHIFT			0
-
-/* NFC_IRQ_STATUS Field */
-#define IDLE_IRQ_BIT				BIT(29)
-#define IDLE_EN_BIT				BIT(20)
-#define CMD_DONE_CLEAR_BIT			BIT(18)
-#define IDLE_CLEAR_BIT				BIT(17)
-
-/*
- * ECC status - seems to consume 8 bytes (double word). The documented
- * status byte is located in the lowest byte of the second word (which is
- * the 4th or 7th byte depending on endianness).
- * Calculate an offset to store the ECC status at the end of the buffer.
- */
-#define ECC_SRAM_ADDR		(PAGE_2K + OOB_MAX - 8)
-
-#define ECC_STATUS		0x4
-#define ECC_STATUS_MASK		0x80
-#define ECC_STATUS_ERR_COUNT	0x3F
-
-enum vf610_nfc_alt_buf {
-	ALT_BUF_DATA = 0,
-	ALT_BUF_ID = 1,
-	ALT_BUF_STAT = 2,
-	ALT_BUF_ONFI = 3,
-};
-
-enum vf610_nfc_variant {
-	NFC_VFC610 = 1,
-};
-
-struct vf610_nfc {
-	struct nand_chip chip;
-	struct device *dev;
-	void __iomem *regs;
-	struct completion cmd_done;
-	uint buf_offset;
-	int write_sz;
-	/* Status and ID are in alternate locations. */
-	enum vf610_nfc_alt_buf alt_buf;
-	enum vf610_nfc_variant variant;
-	struct clk *clk;
-	bool use_hw_ecc;
-	u32 ecc_mode;
-};
-
-static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd)
-{
-	return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip);
-}
-
-static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
-{
-	return readl(nfc->regs + reg);
-}
-
-static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val)
-{
-	writel(val, nfc->regs + reg);
-}
-
-static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits)
-{
-	vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits);
-}
-
-static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits)
-{
-	vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits);
-}
-
-static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg,
-				       u32 mask, u32 shift, u32 val)
-{
-	vf610_nfc_write(nfc, reg,
-			(vf610_nfc_read(nfc, reg) & (~mask)) | val << shift);
-}
-
-static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src,
-				    size_t n)
-{
-	/*
-	 * Use this accessor for the internal SRAM buffers. On the ARM
-	 * Freescale Vybrid SoC it's known that the driver can treat
-	 * the SRAM buffer as if it's memory. Other platform might need
-	 * to treat the buffers differently.
-	 *
-	 * For the time being, use memcpy
-	 */
-	memcpy(dst, src, n);
-}
-
-/* Clear flags for upcoming command */
-static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc)
-{
-	u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS);
-
-	tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
-	vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp);
-}
-
-static void vf610_nfc_done(struct vf610_nfc *nfc)
-{
-	unsigned long timeout = msecs_to_jiffies(100);
-
-	/*
-	 * Barrier is needed after this write. This write need
-	 * to be done before reading the next register the first
-	 * time.
-	 * vf610_nfc_set implicates such a barrier by using writel
-	 * to write to the register.
-	 */
-	vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
-	vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT);
-
-	if (!wait_for_completion_timeout(&nfc->cmd_done, timeout))
-		dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n");
-
-	vf610_nfc_clear_status(nfc);
-}
-
-static u8 vf610_nfc_get_id(struct vf610_nfc *nfc, int col)
-{
-	u32 flash_id;
-
-	if (col < 4) {
-		flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS1);
-		flash_id >>= (3 - col) * 8;
-	} else {
-		flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS2);
-		flash_id >>= 24;
-	}
-
-	return flash_id & 0xff;
-}
-
-static u8 vf610_nfc_get_status(struct vf610_nfc *nfc)
-{
-	return vf610_nfc_read(nfc, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
-}
-
-static void vf610_nfc_send_command(struct vf610_nfc *nfc, u32 cmd_byte1,
-				   u32 cmd_code)
-{
-	u32 tmp;
-
-	vf610_nfc_clear_status(nfc);
-
-	tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD2);
-	tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
-	tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
-	tmp |= cmd_code << CMD_CODE_SHIFT;
-	vf610_nfc_write(nfc, NFC_FLASH_CMD2, tmp);
-}
-
-static void vf610_nfc_send_commands(struct vf610_nfc *nfc, u32 cmd_byte1,
-				    u32 cmd_byte2, u32 cmd_code)
-{
-	u32 tmp;
-
-	vf610_nfc_send_command(nfc, cmd_byte1, cmd_code);
-
-	tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD1);
-	tmp &= ~CMD_BYTE2_MASK;
-	tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
-	vf610_nfc_write(nfc, NFC_FLASH_CMD1, tmp);
-}
-
-static irqreturn_t vf610_nfc_irq(int irq, void *data)
-{
-	struct mtd_info *mtd = data;
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-
-	vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
-	complete(&nfc->cmd_done);
-
-	return IRQ_HANDLED;
-}
-
-static void vf610_nfc_addr_cycle(struct vf610_nfc *nfc, int column, int page)
-{
-	if (column != -1) {
-		if (nfc->chip.options & NAND_BUSWIDTH_16)
-			column = column / 2;
-		vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK,
-				    COL_ADDR_SHIFT, column);
-	}
-	if (page != -1)
-		vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK,
-				    ROW_ADDR_SHIFT, page);
-}
-
-static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode)
-{
-	vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
-			    CONFIG_ECC_MODE_MASK,
-			    CONFIG_ECC_MODE_SHIFT, ecc_mode);
-}
-
-static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size)
-{
-	vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size);
-}
-
-static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
-			      int column, int page)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-	int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0;
-
-	nfc->buf_offset = max(column, 0);
-	nfc->alt_buf = ALT_BUF_DATA;
-
-	switch (command) {
-	case NAND_CMD_SEQIN:
-		/* Use valid column/page from preread... */
-		vf610_nfc_addr_cycle(nfc, column, page);
-		nfc->buf_offset = 0;
-
-		/*
-		 * SEQIN => data => PAGEPROG sequence is done by the controller
-		 * hence we do not need to issue the command here...
-		 */
-		return;
-	case NAND_CMD_PAGEPROG:
-		trfr_sz += nfc->write_sz;
-		vf610_nfc_transfer_size(nfc, trfr_sz);
-		vf610_nfc_send_commands(nfc, NAND_CMD_SEQIN,
-					command, PROGRAM_PAGE_CMD_CODE);
-		if (nfc->use_hw_ecc)
-			vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
-		else
-			vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
-		break;
-
-	case NAND_CMD_RESET:
-		vf610_nfc_transfer_size(nfc, 0);
-		vf610_nfc_send_command(nfc, command, RESET_CMD_CODE);
-		break;
-
-	case NAND_CMD_READOOB:
-		trfr_sz += mtd->oobsize;
-		column = mtd->writesize;
-		vf610_nfc_transfer_size(nfc, trfr_sz);
-		vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
-					NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
-		vf610_nfc_addr_cycle(nfc, column, page);
-		vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
-		break;
-
-	case NAND_CMD_READ0:
-		trfr_sz += mtd->writesize + mtd->oobsize;
-		vf610_nfc_transfer_size(nfc, trfr_sz);
-		vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
-					NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
-		vf610_nfc_addr_cycle(nfc, column, page);
-		vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
-		break;
-
-	case NAND_CMD_PARAM:
-		nfc->alt_buf = ALT_BUF_ONFI;
-		trfr_sz = 3 * sizeof(struct nand_onfi_params);
-		vf610_nfc_transfer_size(nfc, trfr_sz);
-		vf610_nfc_send_command(nfc, command, READ_ONFI_PARAM_CMD_CODE);
-		vf610_nfc_addr_cycle(nfc, -1, column);
-		vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
-		break;
-
-	case NAND_CMD_ERASE1:
-		vf610_nfc_transfer_size(nfc, 0);
-		vf610_nfc_send_commands(nfc, command,
-					NAND_CMD_ERASE2, ERASE_CMD_CODE);
-		vf610_nfc_addr_cycle(nfc, column, page);
-		break;
-
-	case NAND_CMD_READID:
-		nfc->alt_buf = ALT_BUF_ID;
-		nfc->buf_offset = 0;
-		vf610_nfc_transfer_size(nfc, 0);
-		vf610_nfc_send_command(nfc, command, READ_ID_CMD_CODE);
-		vf610_nfc_addr_cycle(nfc, -1, column);
-		break;
-
-	case NAND_CMD_STATUS:
-		nfc->alt_buf = ALT_BUF_STAT;
-		vf610_nfc_transfer_size(nfc, 0);
-		vf610_nfc_send_command(nfc, command, STATUS_READ_CMD_CODE);
-		break;
-	default:
-		return;
-	}
-
-	vf610_nfc_done(nfc);
-
-	nfc->use_hw_ecc = false;
-	nfc->write_sz = 0;
-}
-
-static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-	uint c = nfc->buf_offset;
-
-	/* Alternate buffers are only supported through read_byte */
-	WARN_ON(nfc->alt_buf);
-
-	vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len);
-
-	nfc->buf_offset += len;
-}
-
-static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
-				int len)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-	uint c = nfc->buf_offset;
-	uint l;
-
-	l = min_t(uint, len, mtd->writesize + mtd->oobsize - c);
-	vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
-
-	nfc->write_sz += l;
-	nfc->buf_offset += l;
-}
-
-static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-	u8 tmp;
-	uint c = nfc->buf_offset;
-
-	switch (nfc->alt_buf) {
-	case ALT_BUF_ID:
-		tmp = vf610_nfc_get_id(nfc, c);
-		break;
-	case ALT_BUF_STAT:
-		tmp = vf610_nfc_get_status(nfc);
-		break;
-#ifdef __LITTLE_ENDIAN
-	case ALT_BUF_ONFI:
-		/* Reverse byte since the controller uses big endianness */
-		c = nfc->buf_offset ^ 0x3;
-		/* fall-through */
-#endif
-	default:
-		tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
-		break;
-	}
-	nfc->buf_offset++;
-	return tmp;
-}
-
-static u16 vf610_nfc_read_word(struct mtd_info *mtd)
-{
-	u16 tmp;
-
-	vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
-	return tmp;
-}
-
-/* If not provided, upper layers apply a fixed delay. */
-static int vf610_nfc_dev_ready(struct mtd_info *mtd)
-{
-	/* NFC handles R/B internally; always ready.  */
-	return 1;
-}
-
-/*
- * This function supports Vybrid only (MPC5125 would have full RB and four CS)
- */
-static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-	u32 tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
-
-	/* Vybrid only (MPC5125 would have full RB and four CS) */
-	if (nfc->variant != NFC_VFC610)
-		return;
-
-	tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
-
-	if (chip >= 0) {
-		tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
-		tmp |= BIT(chip) << ROW_ADDR_CHIP_SEL_SHIFT;
-	}
-
-	vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
-}
-
-static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat,
-					 uint8_t *oob, int page)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-	u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS;
-	u8 ecc_status;
-	u8 ecc_count;
-	int flips_threshold = nfc->chip.ecc.strength / 2;
-
-	ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff;
-	ecc_count = ecc_status & ECC_STATUS_ERR_COUNT;
-
-	if (!(ecc_status & ECC_STATUS_MASK))
-		return ecc_count;
-
-	/* Read OOB without ECC unit enabled */
-	vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page);
-	vf610_nfc_read_buf(mtd, oob, mtd->oobsize);
-
-	/*
-	 * On an erased page, bit count (including OOB) should be zero or
-	 * at least less then half of the ECC strength.
-	 */
-	return nand_check_erased_ecc_chunk(dat, nfc->chip.ecc.size, oob,
-					   mtd->oobsize, NULL, 0,
-					   flips_threshold);
-}
-
-static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int oob_required, int page)
-{
-	int eccsize = chip->ecc.size;
-	int stat;
-
-	nand_read_page_op(chip, page, 0, buf, eccsize);
-	if (oob_required)
-		vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
-
-	stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page);
-
-	if (stat < 0) {
-		mtd->ecc_stats.failed++;
-		return 0;
-	} else {
-		mtd->ecc_stats.corrected += stat;
-		return stat;
-	}
-}
-
-static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf, int oob_required, int page)
-{
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-
-	nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
-	if (oob_required)
-		vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
-	/* Always write whole page including OOB due to HW ECC */
-	nfc->use_hw_ecc = true;
-	nfc->write_sz = mtd->writesize + mtd->oobsize;
-
-	return nand_prog_page_end_op(chip);
-}
-
-static const struct of_device_id vf610_nfc_dt_ids[] = {
-	{ .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
-
-static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
-{
-	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
-	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
-	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
-	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
-	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
-	vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
-
-	/* Disable virtual pages, only one elementary transfer unit */
-	vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
-			    CONFIG_PAGE_CNT_SHIFT, 1);
-}
-
-static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
-{
-	if (nfc->chip.options & NAND_BUSWIDTH_16)
-		vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
-	else
-		vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
-
-	if (nfc->chip.ecc.mode == NAND_ECC_HW) {
-		/* Set ECC status offset in SRAM */
-		vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
-				    CONFIG_ECC_SRAM_ADDR_MASK,
-				    CONFIG_ECC_SRAM_ADDR_SHIFT,
-				    ECC_SRAM_ADDR >> 3);
-
-		/* Enable ECC status in SRAM */
-		vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
-	}
-}
-
-static int vf610_nfc_probe(struct platform_device *pdev)
-{
-	struct vf610_nfc *nfc;
-	struct resource *res;
-	struct mtd_info *mtd;
-	struct nand_chip *chip;
-	struct device_node *child;
-	const struct of_device_id *of_id;
-	int err;
-	int irq;
-
-	nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
-	if (!nfc)
-		return -ENOMEM;
-
-	nfc->dev = &pdev->dev;
-	chip = &nfc->chip;
-	mtd = nand_to_mtd(chip);
-
-	mtd->owner = THIS_MODULE;
-	mtd->dev.parent = nfc->dev;
-	mtd->name = DRV_NAME;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
-		return -EINVAL;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	nfc->regs = devm_ioremap_resource(nfc->dev, res);
-	if (IS_ERR(nfc->regs))
-		return PTR_ERR(nfc->regs);
-
-	nfc->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(nfc->clk))
-		return PTR_ERR(nfc->clk);
-
-	err = clk_prepare_enable(nfc->clk);
-	if (err) {
-		dev_err(nfc->dev, "Unable to enable clock!\n");
-		return err;
-	}
-
-	of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
-	nfc->variant = (enum vf610_nfc_variant)of_id->data;
-
-	for_each_available_child_of_node(nfc->dev->of_node, child) {
-		if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
-
-			if (nand_get_flash_node(chip)) {
-				dev_err(nfc->dev,
-					"Only one NAND chip supported!\n");
-				err = -EINVAL;
-				goto err_disable_clk;
-			}
-
-			nand_set_flash_node(chip, child);
-		}
-	}
-
-	if (!nand_get_flash_node(chip)) {
-		dev_err(nfc->dev, "NAND chip sub-node missing!\n");
-		err = -ENODEV;
-		goto err_disable_clk;
-	}
-
-	chip->dev_ready = vf610_nfc_dev_ready;
-	chip->cmdfunc = vf610_nfc_command;
-	chip->read_byte = vf610_nfc_read_byte;
-	chip->read_word = vf610_nfc_read_word;
-	chip->read_buf = vf610_nfc_read_buf;
-	chip->write_buf = vf610_nfc_write_buf;
-	chip->select_chip = vf610_nfc_select_chip;
-	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
-	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
-
-	chip->options |= NAND_NO_SUBPAGE_WRITE;
-
-	init_completion(&nfc->cmd_done);
-
-	err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, mtd);
-	if (err) {
-		dev_err(nfc->dev, "Error requesting IRQ!\n");
-		goto err_disable_clk;
-	}
-
-	vf610_nfc_preinit_controller(nfc);
-
-	/* first scan to find the device and get the page size */
-	err = nand_scan_ident(mtd, 1, NULL);
-	if (err)
-		goto err_disable_clk;
-
-	vf610_nfc_init_controller(nfc);
-
-	/* Bad block options. */
-	if (chip->bbt_options & NAND_BBT_USE_FLASH)
-		chip->bbt_options |= NAND_BBT_NO_OOB;
-
-	/* Single buffer only, max 256 OOB minus ECC status */
-	if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
-		dev_err(nfc->dev, "Unsupported flash page size\n");
-		err = -ENXIO;
-		goto err_disable_clk;
-	}
-
-	if (chip->ecc.mode == NAND_ECC_HW) {
-		if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
-			dev_err(nfc->dev, "Unsupported flash with hwecc\n");
-			err = -ENXIO;
-			goto err_disable_clk;
-		}
-
-		if (chip->ecc.size != mtd->writesize) {
-			dev_err(nfc->dev, "Step size needs to be page size\n");
-			err = -ENXIO;
-			goto err_disable_clk;
-		}
-
-		/* Only 64 byte ECC layouts known */
-		if (mtd->oobsize > 64)
-			mtd->oobsize = 64;
-
-		/*
-		 * mtd->ecclayout is not specified here because we're using the
-		 * default large page ECC layout defined in NAND core.
-		 */
-		if (chip->ecc.strength == 32) {
-			nfc->ecc_mode = ECC_60_BYTE;
-			chip->ecc.bytes = 60;
-		} else if (chip->ecc.strength == 24) {
-			nfc->ecc_mode = ECC_45_BYTE;
-			chip->ecc.bytes = 45;
-		} else {
-			dev_err(nfc->dev, "Unsupported ECC strength\n");
-			err = -ENXIO;
-			goto err_disable_clk;
-		}
-
-		chip->ecc.read_page = vf610_nfc_read_page;
-		chip->ecc.write_page = vf610_nfc_write_page;
-
-		chip->ecc.size = PAGE_2K;
-	}
-
-	/* second phase scan */
-	err = nand_scan_tail(mtd);
-	if (err)
-		goto err_disable_clk;
-
-	platform_set_drvdata(pdev, mtd);
-
-	/* Register device in MTD */
-	err = mtd_device_register(mtd, NULL, 0);
-	if (err)
-		goto err_cleanup_nand;
-	return 0;
-
-err_cleanup_nand:
-	nand_cleanup(chip);
-err_disable_clk:
-	clk_disable_unprepare(nfc->clk);
-	return err;
-}
-
-static int vf610_nfc_remove(struct platform_device *pdev)
-{
-	struct mtd_info *mtd = platform_get_drvdata(pdev);
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-
-	nand_release(mtd);
-	clk_disable_unprepare(nfc->clk);
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int vf610_nfc_suspend(struct device *dev)
-{
-	struct mtd_info *mtd = dev_get_drvdata(dev);
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-
-	clk_disable_unprepare(nfc->clk);
-	return 0;
-}
-
-static int vf610_nfc_resume(struct device *dev)
-{
-	int err;
-
-	struct mtd_info *mtd = dev_get_drvdata(dev);
-	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
-
-	err = clk_prepare_enable(nfc->clk);
-	if (err)
-		return err;
-
-	vf610_nfc_preinit_controller(nfc);
-	vf610_nfc_init_controller(nfc);
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
-
-static struct platform_driver vf610_nfc_driver = {
-	.driver		= {
-		.name	= DRV_NAME,
-		.of_match_table = vf610_nfc_dt_ids,
-		.pm	= &vf610_nfc_pm_ops,
-	},
-	.probe		= vf610_nfc_probe,
-	.remove		= vf610_nfc_remove,
-};
-
-module_platform_driver(vf610_nfc_driver);
-
-MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
-MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver");
-MODULE_LICENSE("GPL");