mmc: renesas_sdhi: really fix WP logic regressions

This reverts commit e060d376cc61 ("mmc: renesas_sdhi: fix WP detection")
and adds some code to really fix the regressions.

It was missed so far that Renesas R-Car instantiations of SDHI chose to
disable internal WP and used the existence of "wp-gpios" to en/disable
WP at all.

With the first refactoring by Yamada-san with commit 2ad1db059b9a ("mmc:
renesas_sdhi: use MMC_CAP2_NO_WRITE_PROTECT instead of TMIO own flag"),
WP was always disabled even when GPIOs were present. With Wolfram's
first fix which gets now reverted, GPIOs were honored. But when not
available, the fallback was to internal WP and not to disabled WP. This
caused wrong WP status on uSD card slots.

Restore the old behaviour now. By default, WP is disabled. When a GPIO
is found, the GPIO re-enables WP. We will think about possible better
ways to handle this in the future.

Tested on a previously regressing Renesas Lager board (H2) and a still
working Renesas Salvator-X board (M3-W).

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

3 files changed, 9 insertions, 0 deletions

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 51e01f03fb99..45c015da2e75 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -28,6 +28,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_dma.h>
 #include <linux/delay.h>
@@ -534,6 +535,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 	host->multi_io_quirk	= renesas_sdhi_multi_io_quirk;
 	host->dma_ops		= dma_ops;
 
+	/* For some SoC, we disable internal WP. GPIO may override this */
+	if (mmc_can_gpio_ro(host->mmc))
+		mmc_data->capabilities2 &= ~MMC_CAP2_NO_WRITE_PROTECT;
+
 	/* SDR speeds are only available on Gen2+ */
 	if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) {
 		/* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index b6edb7a695b5..f7f9773d161f 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -87,6 +87,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
 			  TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_CMD23,
+	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT,
 	.bus_shift	= 2,
 	.scc_offset	= 0x1000,
 	.taps		= rcar_gen3_scc_taps,
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 848e50c1638a..4bb46c489d71 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -42,6 +42,7 @@ static const struct renesas_sdhi_of_data of_rz_compatible = {
 static const struct renesas_sdhi_of_data of_rcar_gen1_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT,
 };
 
 /* Definitions for sampling clocks */
@@ -61,6 +62,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = {
 			  TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_CMD23,
+	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT,
 	.dma_buswidth	= DMA_SLAVE_BUSWIDTH_4_BYTES,
 	.dma_rx_offset	= 0x2000,
 	.scc_offset	= 0x0300,
@@ -81,6 +83,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
 			  TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_CMD23,
+	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT,
 	.bus_shift	= 2,
 	.scc_offset	= 0x1000,
 	.taps		= rcar_gen3_scc_taps,