Merge tag 'v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Having missed the merge window, update to 3.6-rc2 to avoid conflicts with
new patches.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 83 insertions, 94 deletions

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c272c6868ecf..74972c241dff 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -244,7 +244,7 @@ static int mmc_read_ssr(struct mmc_card *card)
 	 * bitfield positions accordingly.
 	 */
 	au = UNSTUFF_BITS(ssr, 428 - 384, 4);
-	if (au > 0 || au <= 9) {
+	if (au > 0 && au <= 9) {
 		card->ssr.au = 1 << (au + 4);
 		es = UNSTUFF_BITS(ssr, 408 - 384, 16);
 		et = UNSTUFF_BITS(ssr, 402 - 384, 6);
@@ -290,8 +290,12 @@ static int mmc_read_switch(struct mmc_card *card)
 		return -ENOMEM;
 	}
 
-	/* Find out the supported Bus Speed Modes. */
-	err = mmc_sd_switch(card, 0, 0, 1, status);
+	/*
+	 * Find out the card's support bits with a mode 0 operation.
+	 * The argument does not matter, as the support bits do not
+	 * change with the arguments.
+	 */
+	err = mmc_sd_switch(card, 0, 0, 0, status);
 	if (err) {
 		/*
 		 * If the host or the card can't do the switch,
@@ -312,46 +316,8 @@ static int mmc_read_switch(struct mmc_card *card)
 
 	if (card->scr.sda_spec3) {
 		card->sw_caps.sd3_bus_mode = status[13];
-
-		/* Find out Driver Strengths supported by the card */
-		err = mmc_sd_switch(card, 0, 2, 1, status);
-		if (err) {
-			/*
-			 * If the host or the card can't do the switch,
-			 * fail more gracefully.
-			 */
-			if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
-				goto out;
-
-			pr_warning("%s: problem reading "
-				"Driver Strength.\n",
-				mmc_hostname(card->host));
-			err = 0;
-
-			goto out;
-		}
-
+		/* Driver Strengths supported by the card */
 		card->sw_caps.sd3_drv_type = status[9];
-
-		/* Find out Current Limits supported by the card */
-		err = mmc_sd_switch(card, 0, 3, 1, status);
-		if (err) {
-			/*
-			 * If the host or the card can't do the switch,
-			 * fail more gracefully.
-			 */
-			if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
-				goto out;
-
-			pr_warning("%s: problem reading "
-				"Current Limit.\n",
-				mmc_hostname(card->host));
-			err = 0;
-
-			goto out;
-		}
-
-		card->sw_caps.sd3_curr_limit = status[7];
 	}
 
 out:
@@ -551,60 +517,80 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
 	return 0;
 }
 
+/* Get host's max current setting at its current voltage */
+static u32 sd_get_host_max_current(struct mmc_host *host)
+{
+	u32 voltage, max_current;
+
+	voltage = 1 << host->ios.vdd;
+	switch (voltage) {
+	case MMC_VDD_165_195:
+		max_current = host->max_current_180;
+		break;
+	case MMC_VDD_29_30:
+	case MMC_VDD_30_31:
+		max_current = host->max_current_300;
+		break;
+	case MMC_VDD_32_33:
+	case MMC_VDD_33_34:
+		max_current = host->max_current_330;
+		break;
+	default:
+		max_current = 0;
+	}
+
+	return max_current;
+}
+
 static int sd_set_current_limit(struct mmc_card *card, u8 *status)
 {
-	int current_limit = 0;
+	int current_limit = SD_SET_CURRENT_NO_CHANGE;
 	int err;
+	u32 max_current;
 
 	/*
 	 * Current limit switch is only defined for SDR50, SDR104, and DDR50
-	 * bus speed modes. For other bus speed modes, we set the default
-	 * current limit of 200mA.
+	 * bus speed modes. For other bus speed modes, we do not change the
+	 * current limit.
 	 */
-	if ((card->sd_bus_speed == UHS_SDR50_BUS_SPEED) ||
-	    (card->sd_bus_speed == UHS_SDR104_BUS_SPEED) ||
-	    (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) {
-		if (card->host->caps & MMC_CAP_MAX_CURRENT_800) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800)
-				current_limit = SD_SET_CURRENT_LIMIT_800;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_600)
-				current_limit = SD_SET_CURRENT_LIMIT_600;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_400)
-				current_limit = SD_SET_CURRENT_LIMIT_400;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		} else if (card->host->caps & MMC_CAP_MAX_CURRENT_600) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600)
-				current_limit = SD_SET_CURRENT_LIMIT_600;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_400)
-				current_limit = SD_SET_CURRENT_LIMIT_400;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		} else if (card->host->caps & MMC_CAP_MAX_CURRENT_400) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400)
-				current_limit = SD_SET_CURRENT_LIMIT_400;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		} else if (card->host->caps & MMC_CAP_MAX_CURRENT_200) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		}
-	} else
+	if ((card->sd_bus_speed != UHS_SDR50_BUS_SPEED) &&
+	    (card->sd_bus_speed != UHS_SDR104_BUS_SPEED) &&
+	    (card->sd_bus_speed != UHS_DDR50_BUS_SPEED))
+		return 0;
+
+	/*
+	 * Host has different current capabilities when operating at
+	 * different voltages, so find out its max current first.
+	 */
+	max_current = sd_get_host_max_current(card->host);
+
+	/*
+	 * We only check host's capability here, if we set a limit that is
+	 * higher than the card's maximum current, the card will be using its
+	 * maximum current, e.g. if the card's maximum current is 300ma, and
+	 * when we set current limit to 200ma, the card will draw 200ma, and
+	 * when we set current limit to 400/600/800ma, the card will draw its
+	 * maximum 300ma from the host.
+	 */
+	if (max_current >= 800)
+		current_limit = SD_SET_CURRENT_LIMIT_800;
+	else if (max_current >= 600)
+		current_limit = SD_SET_CURRENT_LIMIT_600;
+	else if (max_current >= 400)
+		current_limit = SD_SET_CURRENT_LIMIT_400;
+	else if (max_current >= 200)
 		current_limit = SD_SET_CURRENT_LIMIT_200;
 
-	err = mmc_sd_switch(card, 1, 3, current_limit, status);
-	if (err)
-		return err;
+	if (current_limit != SD_SET_CURRENT_NO_CHANGE) {
+		err = mmc_sd_switch(card, 1, 3, current_limit, status);
+		if (err)
+			return err;
 
-	if (((status[15] >> 4) & 0x0F) != current_limit)
-		pr_warning("%s: Problem setting current limit!\n",
-			mmc_hostname(card->host));
+		if (((status[15] >> 4) & 0x0F) != current_limit)
+			pr_warning("%s: Problem setting current limit!\n",
+				mmc_hostname(card->host));
+
+	}
 
 	return 0;
 }
@@ -726,6 +712,7 @@ struct device_type sd_type = {
 int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 {
 	int err;
+	u32 max_current;
 
 	/*
 	 * Since we're changing the OCR value, we seem to
@@ -753,9 +740,12 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))
 		ocr |= SD_OCR_S18R;
 
-	/* If the host can supply more than 150mA, XPC should be set to 1. */
-	if (host->caps & (MMC_CAP_SET_XPC_330 | MMC_CAP_SET_XPC_300 |
-	    MMC_CAP_SET_XPC_180))
+	/*
+	 * If the host can supply more than 150mA at current voltage,
+	 * XPC should be set to 1.
+	 */
+	max_current = sd_get_host_max_current(host);
+	if (max_current > 150)
 		ocr |= SD_OCR_XPC;
 
 try_again:
@@ -911,9 +901,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	/* The initialization should be done at 3.3 V I/O voltage. */
-	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
 	err = mmc_sd_get_cid(host, ocr, cid, &rocr);
 	if (err)
 		return err;
@@ -1075,16 +1062,18 @@ static void mmc_sd_detect(struct mmc_host *host)
  */
 static int mmc_sd_suspend(struct mmc_host *host)
 {
+	int err = 0;
+
 	BUG_ON(!host);
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
 	if (!mmc_host_is_spi(host))
-		mmc_deselect_cards(host);
+		err = mmc_deselect_cards(host);
 	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_release_host(host);
 
-	return 0;
+	return err;
 }
 
 /*