[media] move i2c files into drivers/media/i2c

Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 888 deletions

diff --git a/drivers/media/video/as3645a.c b/drivers/media/video/as3645a.c
deleted file mode 100644
index c4b03572dce8..000000000000
--- a/drivers/media/video/as3645a.c
+++ /dev/null
@@ -1,888 +0,0 @@
-/*
- * drivers/media/video/as3645a.c - AS3645A and LM3555 flash controllers driver
- *
- * Copyright (C) 2008-2011 Nokia Corporation
- * Copyright (c) 2011, Intel Corporation.
- *
- * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * TODO:
- * - Check hardware FSTROBE control when sensor driver add support for this
- *
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <media/as3645a.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-
-#define AS_TIMER_MS_TO_CODE(t)			(((t) - 100) / 50)
-#define AS_TIMER_CODE_TO_MS(c)			(50 * (c) + 100)
-
-/* Register definitions */
-
-/* Read-only Design info register: Reset state: xxxx 0001 */
-#define AS_DESIGN_INFO_REG			0x00
-#define AS_DESIGN_INFO_FACTORY(x)		(((x) >> 4))
-#define AS_DESIGN_INFO_MODEL(x)			((x) & 0x0f)
-
-/* Read-only Version control register: Reset state: 0000 0000
- * for first engineering samples
- */
-#define AS_VERSION_CONTROL_REG			0x01
-#define AS_VERSION_CONTROL_RFU(x)		(((x) >> 4))
-#define AS_VERSION_CONTROL_VERSION(x)		((x) & 0x0f)
-
-/* Read / Write	(Indicator and timer register): Reset state: 0000 1111 */
-#define AS_INDICATOR_AND_TIMER_REG		0x02
-#define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT	0
-#define AS_INDICATOR_AND_TIMER_VREF_SHIFT	4
-#define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT	6
-
-/* Read / Write	(Current set register): Reset state: 0110 1001 */
-#define AS_CURRENT_SET_REG			0x03
-#define AS_CURRENT_ASSIST_LIGHT_SHIFT		0
-#define AS_CURRENT_LED_DET_ON			(1 << 3)
-#define AS_CURRENT_FLASH_CURRENT_SHIFT		4
-
-/* Read / Write	(Control register): Reset state: 1011 0100 */
-#define AS_CONTROL_REG				0x04
-#define AS_CONTROL_MODE_SETTING_SHIFT		0
-#define AS_CONTROL_STROBE_ON			(1 << 2)
-#define AS_CONTROL_OUT_ON			(1 << 3)
-#define AS_CONTROL_EXT_TORCH_ON			(1 << 4)
-#define AS_CONTROL_STROBE_TYPE_EDGE		(0 << 5)
-#define AS_CONTROL_STROBE_TYPE_LEVEL		(1 << 5)
-#define AS_CONTROL_COIL_PEAK_SHIFT		6
-
-/* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */
-#define AS_FAULT_INFO_REG			0x05
-#define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT	(1 << 1)
-#define AS_FAULT_INFO_INDICATOR_LED		(1 << 2)
-#define AS_FAULT_INFO_LED_AMOUNT		(1 << 3)
-#define AS_FAULT_INFO_TIMEOUT			(1 << 4)
-#define AS_FAULT_INFO_OVER_TEMPERATURE		(1 << 5)
-#define AS_FAULT_INFO_SHORT_CIRCUIT		(1 << 6)
-#define AS_FAULT_INFO_OVER_VOLTAGE		(1 << 7)
-
-/* Boost register */
-#define AS_BOOST_REG				0x0d
-#define AS_BOOST_CURRENT_DISABLE		(0 << 0)
-#define AS_BOOST_CURRENT_ENABLE			(1 << 0)
-
-/* Password register is used to unlock boost register writing */
-#define AS_PASSWORD_REG				0x0f
-#define AS_PASSWORD_UNLOCK_VALUE		0x55
-
-enum as_mode {
-	AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT,
-	AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT,
-	AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT,
-	AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT,
-};
-
-/*
- * struct as3645a
- *
- * @subdev:		V4L2 subdev
- * @pdata:		Flash platform data
- * @power_lock:		Protects power_count
- * @power_count:	Power reference count
- * @led_mode:		V4L2 flash LED mode
- * @timeout:		Flash timeout in microseconds
- * @flash_current:	Flash current (0=200mA ... 15=500mA). Maximum
- *			values are 400mA for two LEDs and 500mA for one LED.
- * @assist_current:	Torch/Assist light current (0=20mA, 1=40mA ... 7=160mA)
- * @indicator_current:	Indicator LED current (0=0mA, 1=2.5mA ... 4=10mA)
- * @strobe_source:	Flash strobe source (software or external)
- */
-struct as3645a {
-	struct v4l2_subdev subdev;
-	const struct as3645a_platform_data *pdata;
-
-	struct mutex power_lock;
-	int power_count;
-
-	/* Controls */
-	struct v4l2_ctrl_handler ctrls;
-
-	enum v4l2_flash_led_mode led_mode;
-	unsigned int timeout;
-	u8 flash_current;
-	u8 assist_current;
-	u8 indicator_current;
-	enum v4l2_flash_strobe_source strobe_source;
-};
-
-#define to_as3645a(sd) container_of(sd, struct as3645a, subdev)
-
-/* Return negative errno else zero on success */
-static int as3645a_write(struct as3645a *flash, u8 addr, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	rval = i2c_smbus_write_byte_data(client, addr, val);
-
-	dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val,
-		rval < 0 ? "fail" : "ok");
-
-	return rval;
-}
-
-/* Return negative errno else a data byte received from the device. */
-static int as3645a_read(struct as3645a *flash, u8 addr)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	rval = i2c_smbus_read_byte_data(client, addr);
-
-	dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval,
-		rval < 0 ? "fail" : "ok");
-
-	return rval;
-}
-
-/* -----------------------------------------------------------------------------
- * Hardware configuration and trigger
- */
-
-/*
- * as3645a_set_config - Set flash configuration registers
- * @flash: The flash
- *
- * Configure the hardware with flash, assist and indicator currents, as well as
- * flash timeout.
- *
- * Return 0 on success, or a negative error code if an I2C communication error
- * occurred.
- */
-static int as3645a_set_config(struct as3645a *flash)
-{
-	int ret;
-	u8 val;
-
-	val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT)
-	    | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT)
-	    | AS_CURRENT_LED_DET_ON;
-
-	ret = as3645a_write(flash, AS_CURRENT_SET_REG, val);
-	if (ret < 0)
-		return ret;
-
-	val = AS_TIMER_MS_TO_CODE(flash->timeout / 1000)
-		    << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT;
-
-	val |= (flash->pdata->vref << AS_INDICATOR_AND_TIMER_VREF_SHIFT)
-	    |  ((flash->indicator_current ? flash->indicator_current - 1 : 0)
-		 << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT);
-
-	return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val);
-}
-
-/*
- * as3645a_set_control - Set flash control register
- * @flash: The flash
- * @mode: Desired output mode
- * @on: Desired output state
- *
- * Configure the hardware with output mode and state.
- *
- * Return 0 on success, or a negative error code if an I2C communication error
- * occurred.
- */
-static int
-as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on)
-{
-	u8 reg;
-
-	/* Configure output parameters and operation mode. */
-	reg = (flash->pdata->peak << AS_CONTROL_COIL_PEAK_SHIFT)
-	    | (on ? AS_CONTROL_OUT_ON : 0)
-	    | mode;
-
-	if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH &&
-	    flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) {
-		reg |= AS_CONTROL_STROBE_TYPE_LEVEL
-		    |  AS_CONTROL_STROBE_ON;
-	}
-
-	return as3645a_write(flash, AS_CONTROL_REG, reg);
-}
-
-/*
- * as3645a_set_output - Configure output and operation mode
- * @flash: Flash controller
- * @strobe: Strobe the flash (only valid in flash mode)
- *
- * Turn the LEDs output on/off and set the operation mode based on the current
- * parameters.
- *
- * The AS3645A can't control the indicator LED independently of the flash/torch
- * LED. If the flash controller is in V4L2_FLASH_LED_MODE_NONE mode, set the
- * chip to indicator mode. Otherwise set it to assist light (torch) or flash
- * mode.
- *
- * In indicator and assist modes, turn the output on/off based on the indicator
- * and torch currents. In software strobe flash mode, turn the output on/off
- * based on the strobe parameter.
- */
-static int as3645a_set_output(struct as3645a *flash, bool strobe)
-{
-	enum as_mode mode;
-	bool on;
-
-	switch (flash->led_mode) {
-	case V4L2_FLASH_LED_MODE_NONE:
-		on = flash->indicator_current != 0;
-		mode = AS_MODE_INDICATOR;
-		break;
-	case V4L2_FLASH_LED_MODE_TORCH:
-		on = true;
-		mode = AS_MODE_ASSIST;
-		break;
-	case V4L2_FLASH_LED_MODE_FLASH:
-		on = strobe;
-		mode = AS_MODE_FLASH;
-		break;
-	default:
-		BUG();
-	}
-
-	/* Configure output parameters and operation mode. */
-	return as3645a_set_control(flash, mode, on);
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 controls
- */
-
-static int as3645a_is_active(struct as3645a *flash)
-{
-	int ret;
-
-	ret = as3645a_read(flash, AS_CONTROL_REG);
-	return ret < 0 ? ret : !!(ret & AS_CONTROL_OUT_ON);
-}
-
-static int as3645a_read_fault(struct as3645a *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	/* NOTE: reading register clear fault status */
-	rval = as3645a_read(flash, AS_FAULT_INFO_REG);
-	if (rval < 0)
-		return rval;
-
-	if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT)
-		dev_dbg(&client->dev, "Inductor Peak limit fault\n");
-
-	if (rval & AS_FAULT_INFO_INDICATOR_LED)
-		dev_dbg(&client->dev, "Indicator LED fault: "
-			"Short circuit or open loop\n");
-
-	dev_dbg(&client->dev, "%u connected LEDs\n",
-		rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1);
-
-	if (rval & AS_FAULT_INFO_TIMEOUT)
-		dev_dbg(&client->dev, "Timeout fault\n");
-
-	if (rval & AS_FAULT_INFO_OVER_TEMPERATURE)
-		dev_dbg(&client->dev, "Over temperature fault\n");
-
-	if (rval & AS_FAULT_INFO_SHORT_CIRCUIT)
-		dev_dbg(&client->dev, "Short circuit fault\n");
-
-	if (rval & AS_FAULT_INFO_OVER_VOLTAGE)
-		dev_dbg(&client->dev, "Over voltage fault: "
-			"Indicates missing capacitor or open connection\n");
-
-	return rval;
-}
-
-static int as3645a_get_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct as3645a *flash =
-		container_of(ctrl->handler, struct as3645a, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int value;
-
-	switch (ctrl->id) {
-	case V4L2_CID_FLASH_FAULT:
-		value = as3645a_read_fault(flash);
-		if (value < 0)
-			return value;
-
-		ctrl->cur.val = 0;
-		if (value & AS_FAULT_INFO_SHORT_CIRCUIT)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
-		if (value & AS_FAULT_INFO_OVER_TEMPERATURE)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
-		if (value & AS_FAULT_INFO_TIMEOUT)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
-		if (value & AS_FAULT_INFO_OVER_VOLTAGE)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
-		if (value & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_CURRENT;
-		if (value & AS_FAULT_INFO_INDICATOR_LED)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_INDICATOR;
-		break;
-
-	case V4L2_CID_FLASH_STROBE_STATUS:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
-			ctrl->cur.val = 0;
-			break;
-		}
-
-		value = as3645a_is_active(flash);
-		if (value < 0)
-			return value;
-
-		ctrl->cur.val = value;
-		break;
-	}
-
-	dev_dbg(&client->dev, "G_CTRL %08x:%d\n", ctrl->id, ctrl->cur.val);
-
-	return 0;
-}
-
-static int as3645a_set_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct as3645a *flash =
-		container_of(ctrl->handler, struct as3645a, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int ret;
-
-	dev_dbg(&client->dev, "S_CTRL %08x:%d\n", ctrl->id, ctrl->val);
-
-	/* If a control that doesn't apply to the current mode is modified,
-	 * we store the value and return immediately. The setting will be
-	 * applied when the LED mode is changed. Otherwise we apply the setting
-	 * immediately.
-	 */
-
-	switch (ctrl->id) {
-	case V4L2_CID_FLASH_LED_MODE:
-		if (flash->indicator_current)
-			return -EBUSY;
-
-		ret = as3645a_set_config(flash);
-		if (ret < 0)
-			return ret;
-
-		flash->led_mode = ctrl->val;
-		return as3645a_set_output(flash, false);
-
-	case V4L2_CID_FLASH_STROBE_SOURCE:
-		flash->strobe_source = ctrl->val;
-
-		/* Applies to flash mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			break;
-
-		return as3645a_set_output(flash, false);
-
-	case V4L2_CID_FLASH_STROBE:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			return -EBUSY;
-
-		return as3645a_set_output(flash, true);
-
-	case V4L2_CID_FLASH_STROBE_STOP:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			return -EBUSY;
-
-		return as3645a_set_output(flash, false);
-
-	case V4L2_CID_FLASH_TIMEOUT:
-		flash->timeout = ctrl->val;
-
-		/* Applies to flash mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			break;
-
-		return as3645a_set_config(flash);
-
-	case V4L2_CID_FLASH_INTENSITY:
-		flash->flash_current = (ctrl->val - AS3645A_FLASH_INTENSITY_MIN)
-				     / AS3645A_FLASH_INTENSITY_STEP;
-
-		/* Applies to flash mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			break;
-
-		return as3645a_set_config(flash);
-
-	case V4L2_CID_FLASH_TORCH_INTENSITY:
-		flash->assist_current =
-			(ctrl->val - AS3645A_TORCH_INTENSITY_MIN)
-			/ AS3645A_TORCH_INTENSITY_STEP;
-
-		/* Applies to torch mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_TORCH)
-			break;
-
-		return as3645a_set_config(flash);
-
-	case V4L2_CID_FLASH_INDICATOR_INTENSITY:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_NONE)
-			return -EBUSY;
-
-		flash->indicator_current =
-			(ctrl->val - AS3645A_INDICATOR_INTENSITY_MIN)
-			/ AS3645A_INDICATOR_INTENSITY_STEP;
-
-		ret = as3645a_set_config(flash);
-		if (ret < 0)
-			return ret;
-
-		if ((ctrl->val == 0) == (ctrl->cur.val == 0))
-			break;
-
-		return as3645a_set_output(flash, false);
-	}
-
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops as3645a_ctrl_ops = {
-	.g_volatile_ctrl = as3645a_get_ctrl,
-	.s_ctrl = as3645a_set_ctrl,
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-/* Put device into know state. */
-static int as3645a_setup(struct as3645a *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int ret;
-
-	/* clear errors */
-	ret = as3645a_read(flash, AS_FAULT_INFO_REG);
-	if (ret < 0)
-		return ret;
-
-	dev_dbg(&client->dev, "Fault info: %02x\n", ret);
-
-	ret = as3645a_set_config(flash);
-	if (ret < 0)
-		return ret;
-
-	ret = as3645a_set_output(flash, false);
-	if (ret < 0)
-		return ret;
-
-	/* read status */
-	ret = as3645a_read_fault(flash);
-	if (ret < 0)
-		return ret;
-
-	dev_dbg(&client->dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n",
-		as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG));
-	dev_dbg(&client->dev, "AS_CURRENT_SET_REG: %02x\n",
-		as3645a_read(flash, AS_CURRENT_SET_REG));
-	dev_dbg(&client->dev, "AS_CONTROL_REG: %02x\n",
-		as3645a_read(flash, AS_CONTROL_REG));
-
-	return ret & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0;
-}
-
-static int __as3645a_set_power(struct as3645a *flash, int on)
-{
-	int ret;
-
-	if (!on)
-		as3645a_set_control(flash, AS_MODE_EXT_TORCH, false);
-
-	if (flash->pdata->set_power) {
-		ret = flash->pdata->set_power(&flash->subdev, on);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (!on)
-		return 0;
-
-	ret = as3645a_setup(flash);
-	if (ret < 0) {
-		if (flash->pdata->set_power)
-			flash->pdata->set_power(&flash->subdev, 0);
-	}
-
-	return ret;
-}
-
-static int as3645a_set_power(struct v4l2_subdev *sd, int on)
-{
-	struct as3645a *flash = to_as3645a(sd);
-	int ret = 0;
-
-	mutex_lock(&flash->power_lock);
-
-	if (flash->power_count == !on) {
-		ret = __as3645a_set_power(flash, !!on);
-		if (ret < 0)
-			goto done;
-	}
-
-	flash->power_count += on ? 1 : -1;
-	WARN_ON(flash->power_count < 0);
-
-done:
-	mutex_unlock(&flash->power_lock);
-	return ret;
-}
-
-static int as3645a_registered(struct v4l2_subdev *sd)
-{
-	struct as3645a *flash = to_as3645a(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int rval, man, model, rfu, version;
-	const char *vendor;
-
-	/* Power up the flash driver and read manufacturer ID, model ID, RFU
-	 * and version.
-	 */
-	rval = as3645a_set_power(&flash->subdev, 1);
-	if (rval < 0)
-		return rval;
-
-	rval = as3645a_read(flash, AS_DESIGN_INFO_REG);
-	if (rval < 0)
-		goto power_off;
-
-	man = AS_DESIGN_INFO_FACTORY(rval);
-	model = AS_DESIGN_INFO_MODEL(rval);
-
-	rval = as3645a_read(flash, AS_VERSION_CONTROL_REG);
-	if (rval < 0)
-		goto power_off;
-
-	rfu = AS_VERSION_CONTROL_RFU(rval);
-	version = AS_VERSION_CONTROL_VERSION(rval);
-
-	/* Verify the chip model and version. */
-	if (model != 0x01 || rfu != 0x00) {
-		dev_err(&client->dev, "AS3645A not detected "
-			"(model %d rfu %d)\n", model, rfu);
-		rval = -ENODEV;
-		goto power_off;
-	}
-
-	switch (man) {
-	case 1:
-		vendor = "AMS, Austria Micro Systems";
-		break;
-	case 2:
-		vendor = "ADI, Analog Devices Inc.";
-		break;
-	case 3:
-		vendor = "NSC, National Semiconductor";
-		break;
-	case 4:
-		vendor = "NXP";
-		break;
-	case 5:
-		vendor = "TI, Texas Instrument";
-		break;
-	default:
-		vendor = "Unknown";
-	}
-
-	dev_info(&client->dev, "Chip vendor: %s (%d) Version: %d\n", vendor,
-		 man, version);
-
-	rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE);
-	if (rval < 0)
-		goto power_off;
-
-	rval = as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE);
-	if (rval < 0)
-		goto power_off;
-
-	/* Setup default values. This makes sure that the chip is in a known
-	 * state, in case the power rail can't be controlled.
-	 */
-	rval = as3645a_setup(flash);
-
-power_off:
-	as3645a_set_power(&flash->subdev, 0);
-
-	return rval;
-}
-
-static int as3645a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return as3645a_set_power(sd, 1);
-}
-
-static int as3645a_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return as3645a_set_power(sd, 0);
-}
-
-static const struct v4l2_subdev_core_ops as3645a_core_ops = {
-	.s_power		= as3645a_set_power,
-};
-
-static const struct v4l2_subdev_ops as3645a_ops = {
-	.core = &as3645a_core_ops,
-};
-
-static const struct v4l2_subdev_internal_ops as3645a_internal_ops = {
-	.registered = as3645a_registered,
-	.open = as3645a_open,
-	.close = as3645a_close,
-};
-
-/* -----------------------------------------------------------------------------
- *  I2C driver
- */
-#ifdef CONFIG_PM
-
-static int as3645a_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct as3645a *flash = to_as3645a(subdev);
-	int rval;
-
-	if (flash->power_count == 0)
-		return 0;
-
-	rval = __as3645a_set_power(flash, 0);
-
-	dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok");
-
-	return rval;
-}
-
-static int as3645a_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct as3645a *flash = to_as3645a(subdev);
-	int rval;
-
-	if (flash->power_count == 0)
-		return 0;
-
-	rval = __as3645a_set_power(flash, 1);
-
-	dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok");
-
-	return rval;
-}
-
-#else
-
-#define as3645a_suspend	NULL
-#define as3645a_resume	NULL
-
-#endif /* CONFIG_PM */
-
-/*
- * as3645a_init_controls - Create controls
- * @flash: The flash
- *
- * The number of LEDs reported in platform data is used to compute default
- * limits. Parameters passed through platform data can override those limits.
- */
-static int __devinit as3645a_init_controls(struct as3645a *flash)
-{
-	const struct as3645a_platform_data *pdata = flash->pdata;
-	struct v4l2_ctrl *ctrl;
-	int maximum;
-
-	v4l2_ctrl_handler_init(&flash->ctrls, 10);
-
-	/* V4L2_CID_FLASH_LED_MODE */
-	v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops,
-			       V4L2_CID_FLASH_LED_MODE, 2, ~7,
-			       V4L2_FLASH_LED_MODE_NONE);
-
-	/* V4L2_CID_FLASH_STROBE_SOURCE */
-	v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops,
-			       V4L2_CID_FLASH_STROBE_SOURCE,
-			       pdata->ext_strobe ? 1 : 0,
-			       pdata->ext_strobe ? ~3 : ~1,
-			       V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
-
-	flash->strobe_source = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
-
-	/* V4L2_CID_FLASH_STROBE */
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
-
-	/* V4L2_CID_FLASH_STROBE_STOP */
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
-
-	/* V4L2_CID_FLASH_STROBE_STATUS */
-	ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-				 V4L2_CID_FLASH_STROBE_STATUS, 0, 1, 1, 1);
-	if (ctrl != NULL)
-		ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-	/* V4L2_CID_FLASH_TIMEOUT */
-	maximum = pdata->timeout_max;
-
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_TIMEOUT, AS3645A_FLASH_TIMEOUT_MIN,
-			  maximum, AS3645A_FLASH_TIMEOUT_STEP, maximum);
-
-	flash->timeout = maximum;
-
-	/* V4L2_CID_FLASH_INTENSITY */
-	maximum = pdata->flash_max_current;
-
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_INTENSITY, AS3645A_FLASH_INTENSITY_MIN,
-			  maximum, AS3645A_FLASH_INTENSITY_STEP, maximum);
-
-	flash->flash_current = (maximum - AS3645A_FLASH_INTENSITY_MIN)
-			     / AS3645A_FLASH_INTENSITY_STEP;
-
-	/* V4L2_CID_FLASH_TORCH_INTENSITY */
-	maximum = pdata->torch_max_current;
-
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_TORCH_INTENSITY,
-			  AS3645A_TORCH_INTENSITY_MIN, maximum,
-			  AS3645A_TORCH_INTENSITY_STEP,
-			  AS3645A_TORCH_INTENSITY_MIN);
-
-	flash->assist_current = 0;
-
-	/* V4L2_CID_FLASH_INDICATOR_INTENSITY */
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_INDICATOR_INTENSITY,
-			  AS3645A_INDICATOR_INTENSITY_MIN,
-			  AS3645A_INDICATOR_INTENSITY_MAX,
-			  AS3645A_INDICATOR_INTENSITY_STEP,
-			  AS3645A_INDICATOR_INTENSITY_MIN);
-
-	flash->indicator_current = 0;
-
-	/* V4L2_CID_FLASH_FAULT */
-	ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-				 V4L2_CID_FLASH_FAULT, 0,
-				 V4L2_FLASH_FAULT_OVER_VOLTAGE |
-				 V4L2_FLASH_FAULT_TIMEOUT |
-				 V4L2_FLASH_FAULT_OVER_TEMPERATURE |
-				 V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
-	if (ctrl != NULL)
-		ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-	flash->subdev.ctrl_handler = &flash->ctrls;
-
-	return flash->ctrls.error;
-}
-
-static int __devinit as3645a_probe(struct i2c_client *client,
-				   const struct i2c_device_id *devid)
-{
-	struct as3645a *flash;
-	int ret;
-
-	if (client->dev.platform_data == NULL)
-		return -ENODEV;
-
-	flash = kzalloc(sizeof(*flash), GFP_KERNEL);
-	if (flash == NULL)
-		return -ENOMEM;
-
-	flash->pdata = client->dev.platform_data;
-
-	v4l2_i2c_subdev_init(&flash->subdev, client, &as3645a_ops);
-	flash->subdev.internal_ops = &as3645a_internal_ops;
-	flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	ret = as3645a_init_controls(flash);
-	if (ret < 0)
-		goto done;
-
-	ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
-	if (ret < 0)
-		goto done;
-
-	flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
-
-	mutex_init(&flash->power_lock);
-
-	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
-
-done:
-	if (ret < 0) {
-		v4l2_ctrl_handler_free(&flash->ctrls);
-		kfree(flash);
-	}
-
-	return ret;
-}
-
-static int __devexit as3645a_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct as3645a *flash = to_as3645a(subdev);
-
-	v4l2_device_unregister_subdev(subdev);
-	v4l2_ctrl_handler_free(&flash->ctrls);
-	media_entity_cleanup(&flash->subdev.entity);
-	mutex_destroy(&flash->power_lock);
-	kfree(flash);
-
-	return 0;
-}
-
-static const struct i2c_device_id as3645a_id_table[] = {
-	{ AS3645A_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, as3645a_id_table);
-
-static const struct dev_pm_ops as3645a_pm_ops = {
-	.suspend = as3645a_suspend,
-	.resume = as3645a_resume,
-};
-
-static struct i2c_driver as3645a_i2c_driver = {
-	.driver	= {
-		.name = AS3645A_NAME,
-		.pm   = &as3645a_pm_ops,
-	},
-	.probe	= as3645a_probe,
-	.remove	= __devexit_p(as3645a_remove),
-	.id_table = as3645a_id_table,
-};
-
-module_i2c_driver(as3645a_i2c_driver);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones");
-MODULE_LICENSE("GPL");