Staging: ipack: move out of staging

The ipack subsystem is cleaned up enough to now move out of the staging
tree, and into drivers/ipack.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 751 insertions, 0 deletions

diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
new file mode 100644
index 000000000000..783f120338d1
--- /dev/null
+++ b/drivers/ipack/devices/ipoctal.c
@@ -0,0 +1,751 @@
+/**
+ * ipoctal.c
+ *
+ * driver for the GE IP-OCTAL boards
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <linux/io.h>
+#include "../ipack.h"
+#include "ipoctal.h"
+#include "scc2698.h"
+
+#define IP_OCTAL_ID_SPACE_VECTOR    0x41
+#define IP_OCTAL_NB_BLOCKS          4
+
+static const struct tty_operations ipoctal_fops;
+
+struct ipoctal_channel {
+	struct ipoctal_stats		stats;
+	unsigned int			nb_bytes;
+	wait_queue_head_t		queue;
+	spinlock_t			lock;
+	unsigned int			pointer_read;
+	unsigned int			pointer_write;
+	atomic_t			open;
+	struct tty_port			tty_port;
+	union scc2698_channel __iomem	*regs;
+	union scc2698_block __iomem	*block_regs;
+	unsigned int			board_id;
+	unsigned char			*board_write;
+	u8				isr_rx_rdy_mask;
+	u8				isr_tx_rdy_mask;
+};
+
+struct ipoctal {
+	struct ipack_device		*dev;
+	unsigned int			board_id;
+	struct ipoctal_channel		channel[NR_CHANNELS];
+	unsigned char			write;
+	struct tty_driver		*tty_drv;
+	u8 __iomem			*mem8_space;
+	u8 __iomem			*int_space;
+};
+
+static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel;
+
+	channel = dev_get_drvdata(tty->dev);
+
+	iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	return 0;
+}
+
+static int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+	int res;
+	struct ipoctal_channel *channel;
+
+	channel = dev_get_drvdata(tty->dev);
+
+	if (atomic_read(&channel->open))
+		return -EBUSY;
+
+	tty->driver_data = channel;
+
+	res = tty_port_open(&channel->tty_port, tty, file);
+	if (res)
+		return res;
+
+	atomic_inc(&channel->open);
+	return 0;
+}
+
+static void ipoctal_reset_stats(struct ipoctal_stats *stats)
+{
+	stats->tx = 0;
+	stats->rx = 0;
+	stats->rcv_break = 0;
+	stats->framing_err = 0;
+	stats->overrun_err = 0;
+	stats->parity_err = 0;
+}
+
+static void ipoctal_free_channel(struct ipoctal_channel *channel)
+{
+	ipoctal_reset_stats(&channel->stats);
+	channel->pointer_read = 0;
+	channel->pointer_write = 0;
+	channel->nb_bytes = 0;
+}
+
+static void ipoctal_close(struct tty_struct *tty, struct file *filp)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	tty_port_close(&channel->tty_port, tty, filp);
+
+	if (atomic_dec_and_test(&channel->open))
+		ipoctal_free_channel(channel);
+}
+
+static int ipoctal_get_icount(struct tty_struct *tty,
+			      struct serial_icounter_struct *icount)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	icount->cts = 0;
+	icount->dsr = 0;
+	icount->rng = 0;
+	icount->dcd = 0;
+	icount->rx = channel->stats.rx;
+	icount->tx = channel->stats.tx;
+	icount->frame = channel->stats.framing_err;
+	icount->parity = channel->stats.parity_err;
+	icount->brk = channel->stats.rcv_break;
+	return 0;
+}
+
+static void ipoctal_irq_rx(struct ipoctal_channel *channel,
+			   struct tty_struct *tty, u8 sr)
+{
+	unsigned char value;
+	unsigned char flag = TTY_NORMAL;
+	u8 isr;
+
+	do {
+		value = ioread8(&channel->regs->r.rhr);
+		/* Error: count statistics */
+		if (sr & SR_ERROR) {
+			iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+
+			if (sr & SR_OVERRUN_ERROR) {
+				channel->stats.overrun_err++;
+				/* Overrun doesn't affect the current character*/
+				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+			}
+			if (sr & SR_PARITY_ERROR) {
+				channel->stats.parity_err++;
+				flag = TTY_PARITY;
+			}
+			if (sr & SR_FRAMING_ERROR) {
+				channel->stats.framing_err++;
+				flag = TTY_FRAME;
+			}
+			if (sr & SR_RECEIVED_BREAK) {
+				iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
+				channel->stats.rcv_break++;
+				flag = TTY_BREAK;
+			}
+		}
+		tty_insert_flip_char(tty, value, flag);
+
+		/* Check if there are more characters in RX FIFO
+		 * If there are more, the isr register for this channel
+		 * has enabled the RxRDY|FFULL bit.
+		 */
+		isr = ioread8(&channel->block_regs->r.isr);
+		sr = ioread8(&channel->regs->r.sr);
+	} while (isr & channel->isr_rx_rdy_mask);
+
+	tty_flip_buffer_push(tty);
+}
+
+static void ipoctal_irq_tx(struct ipoctal_channel *channel)
+{
+	unsigned char value;
+	unsigned int *pointer_write = &channel->pointer_write;
+
+	if (channel->nb_bytes <= 0) {
+		channel->nb_bytes = 0;
+		return;
+	}
+
+	value = channel->tty_port.xmit_buf[*pointer_write];
+	iowrite8(value, &channel->regs->w.thr);
+	channel->stats.tx++;
+	(*pointer_write)++;
+	*pointer_write = *pointer_write % PAGE_SIZE;
+	channel->nb_bytes--;
+
+	if ((channel->nb_bytes == 0) &&
+	    (waitqueue_active(&channel->queue))) {
+
+		if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+			*channel->board_write = 1;
+			wake_up_interruptible(&channel->queue);
+		}
+	}
+}
+
+static void ipoctal_irq_channel(struct ipoctal_channel *channel)
+{
+	u8 isr, sr;
+	struct tty_struct *tty;
+
+	/* If there is no client, skip the check */
+	if (!atomic_read(&channel->open))
+		return;
+
+	tty = tty_port_tty_get(&channel->tty_port);
+	if (!tty)
+		return;
+	/* The HW is organized in pair of channels.  See which register we need
+	 * to read from */
+	isr = ioread8(&channel->block_regs->r.isr);
+	sr = ioread8(&channel->regs->r.sr);
+
+	/* In case of RS-485, change from TX to RX when finishing TX.
+	 * Half-duplex. */
+	if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
+	    (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
+		iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
+		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+		*channel->board_write = 1;
+		wake_up_interruptible(&channel->queue);
+	}
+
+	/* RX data */
+	if ((isr & channel->isr_rx_rdy_mask) && (sr & SR_RX_READY))
+		ipoctal_irq_rx(channel, tty, sr);
+
+	/* TX of each character */
+	if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
+		ipoctal_irq_tx(channel);
+
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+static irqreturn_t ipoctal_irq_handler(void *arg)
+{
+	unsigned int i;
+	struct ipoctal *ipoctal = (struct ipoctal *) arg;
+
+	/* Check all channels */
+	for (i = 0; i < NR_CHANNELS; i++)
+		ipoctal_irq_channel(&ipoctal->channel[i]);
+
+	/* Clear the IPack device interrupt */
+	readw(ipoctal->int_space + ACK_INT_REQ0);
+	readw(ipoctal->int_space + ACK_INT_REQ1);
+
+	return IRQ_HANDLED;
+}
+
+static const struct tty_port_operations ipoctal_tty_port_ops = {
+	.dtr_rts = NULL,
+	.activate = ipoctal_port_activate,
+};
+
+static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
+			     unsigned int slot)
+{
+	int res;
+	int i;
+	struct tty_driver *tty;
+	char name[20];
+	struct ipoctal_channel *channel;
+	struct ipack_region *region;
+	void __iomem *addr;
+	union scc2698_channel __iomem *chan_regs;
+	union scc2698_block __iomem *block_regs;
+
+	ipoctal->board_id = ipoctal->dev->id_device;
+
+	region = &ipoctal->dev->region[IPACK_IO_SPACE];
+	addr = devm_ioremap_nocache(&ipoctal->dev->dev,
+				    region->start, region->size);
+	if (!addr) {
+		dev_err(&ipoctal->dev->dev,
+			"Unable to map slot [%d:%d] IO space!\n",
+			bus_nr, slot);
+		return -EADDRNOTAVAIL;
+	}
+	/* Save the virtual address to access the registers easily */
+	chan_regs =
+		(union scc2698_channel __iomem *) addr;
+	block_regs =
+		(union scc2698_block __iomem *) addr;
+
+	region = &ipoctal->dev->region[IPACK_INT_SPACE];
+	ipoctal->int_space =
+		devm_ioremap_nocache(&ipoctal->dev->dev,
+				     region->start, region->size);
+	if (!ipoctal->int_space) {
+		dev_err(&ipoctal->dev->dev,
+			"Unable to map slot [%d:%d] INT space!\n",
+			bus_nr, slot);
+		return -EADDRNOTAVAIL;
+	}
+
+	region = &ipoctal->dev->region[IPACK_MEM8_SPACE];
+	ipoctal->mem8_space =
+		devm_ioremap_nocache(&ipoctal->dev->dev,
+				     region->start, 0x8000);
+	if (!addr) {
+		dev_err(&ipoctal->dev->dev,
+			"Unable to map slot [%d:%d] MEM8 space!\n",
+			bus_nr, slot);
+		return -EADDRNOTAVAIL;
+	}
+
+
+	/* Disable RX and TX before touching anything */
+	for (i = 0; i < NR_CHANNELS ; i++) {
+		struct ipoctal_channel *channel = &ipoctal->channel[i];
+		channel->regs = chan_regs + i;
+		channel->block_regs = block_regs + (i >> 1);
+		channel->board_write = &ipoctal->write;
+		channel->board_id = ipoctal->board_id;
+		if (i & 1) {
+			channel->isr_tx_rdy_mask = ISR_TxRDY_B;
+			channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_B;
+		} else {
+			channel->isr_tx_rdy_mask = ISR_TxRDY_A;
+			channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_A;
+		}
+
+		iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+		iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY,
+			 &channel->regs->w.mr); /* mr1 */
+		iowrite8(0, &channel->regs->w.mr); /* mr2 */
+		iowrite8(TX_CLK_9600  | RX_CLK_9600, &channel->regs->w.csr);
+	}
+
+	for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) {
+		iowrite8(ACR_BRG_SET2, &block_regs[i].w.acr);
+		iowrite8(OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | OPCR_MPOb_RTSN,
+			 &block_regs[i].w.opcr);
+		iowrite8(IMR_TxRDY_A | IMR_RxRDY_FFULL_A | IMR_DELTA_BREAK_A |
+			 IMR_TxRDY_B | IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B,
+			 &block_regs[i].w.imr);
+	}
+
+	/*
+	 * IP-OCTAL has different addresses to copy its IRQ vector.
+	 * Depending of the carrier these addresses are accesible or not.
+	 * More info in the datasheet.
+	 */
+	ipoctal->dev->bus->ops->request_irq(ipoctal->dev,
+				       ipoctal_irq_handler, ipoctal);
+	/* Dummy write */
+	iowrite8(1, ipoctal->mem8_space + 1);
+
+	/* Register the TTY device */
+
+	/* Each IP-OCTAL channel is a TTY port */
+	tty = alloc_tty_driver(NR_CHANNELS);
+
+	if (!tty)
+		return -ENOMEM;
+
+	/* Fill struct tty_driver with ipoctal data */
+	tty->owner = THIS_MODULE;
+	tty->driver_name = KBUILD_MODNAME;
+	sprintf(name, KBUILD_MODNAME ".%d.%d.", bus_nr, slot);
+	tty->name = name;
+	tty->major = 0;
+
+	tty->minor_start = 0;
+	tty->type = TTY_DRIVER_TYPE_SERIAL;
+	tty->subtype = SERIAL_TYPE_NORMAL;
+	tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty->init_termios = tty_std_termios;
+	tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->init_termios.c_ispeed = 9600;
+	tty->init_termios.c_ospeed = 9600;
+
+	tty_set_operations(tty, &ipoctal_fops);
+	res = tty_register_driver(tty);
+	if (res) {
+		dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n");
+		put_tty_driver(tty);
+		return res;
+	}
+
+	/* Save struct tty_driver for use it when uninstalling the device */
+	ipoctal->tty_drv = tty;
+
+	for (i = 0; i < NR_CHANNELS; i++) {
+		struct device *tty_dev;
+
+		channel = &ipoctal->channel[i];
+		tty_port_init(&channel->tty_port);
+		tty_port_alloc_xmit_buf(&channel->tty_port);
+		channel->tty_port.ops = &ipoctal_tty_port_ops;
+
+		ipoctal_reset_stats(&channel->stats);
+		channel->nb_bytes = 0;
+		init_waitqueue_head(&channel->queue);
+
+		spin_lock_init(&channel->lock);
+		channel->pointer_read = 0;
+		channel->pointer_write = 0;
+		tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL);
+		if (IS_ERR(tty_dev)) {
+			dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
+			continue;
+		}
+		dev_set_drvdata(tty_dev, channel);
+
+		/*
+		 * Enable again the RX. TX will be enabled when
+		 * there is something to send
+		 */
+		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	}
+
+	return 0;
+}
+
+static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel,
+					    const unsigned char *buf,
+					    int count)
+{
+	unsigned long flags;
+	int i;
+	unsigned int *pointer_read = &channel->pointer_read;
+
+	/* Copy the bytes from the user buffer to the internal one */
+	for (i = 0; i < count; i++) {
+		if (i <= (PAGE_SIZE - channel->nb_bytes)) {
+			spin_lock_irqsave(&channel->lock, flags);
+			channel->tty_port.xmit_buf[*pointer_read] = buf[i];
+			*pointer_read = (*pointer_read + 1) % PAGE_SIZE;
+			channel->nb_bytes++;
+			spin_unlock_irqrestore(&channel->lock, flags);
+		} else {
+			break;
+		}
+	}
+	return i;
+}
+
+static int ipoctal_write_tty(struct tty_struct *tty,
+			     const unsigned char *buf, int count)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+	unsigned int char_copied;
+
+	char_copied = ipoctal_copy_write_buffer(channel, buf, count);
+
+	/* As the IP-OCTAL 485 only supports half duplex, do it manually */
+	if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+		iowrite8(CR_DISABLE_RX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr);
+	}
+
+	/*
+	 * Send a packet and then disable TX to avoid failure after several send
+	 * operations
+	 */
+	iowrite8(CR_ENABLE_TX, &channel->regs->w.cr);
+	wait_event_interruptible(channel->queue, *channel->board_write);
+	iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
+
+	*channel->board_write = 0;
+	return char_copied;
+}
+
+static int ipoctal_write_room(struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	return PAGE_SIZE - channel->nb_bytes;
+}
+
+static int ipoctal_chars_in_buffer(struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	return channel->nb_bytes;
+}
+
+static void ipoctal_set_termios(struct tty_struct *tty,
+				struct ktermios *old_termios)
+{
+	unsigned int cflag;
+	unsigned char mr1 = 0;
+	unsigned char mr2 = 0;
+	unsigned char csr = 0;
+	struct ipoctal_channel *channel = tty->driver_data;
+	speed_t baud;
+
+	cflag = tty->termios.c_cflag;
+
+	/* Disable and reset everything before change the setup */
+	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+
+	/* Set Bits per chars */
+	switch (cflag & CSIZE) {
+	case CS6:
+		mr1 |= MR1_CHRL_6_BITS;
+		break;
+	case CS7:
+		mr1 |= MR1_CHRL_7_BITS;
+		break;
+	case CS8:
+	default:
+		mr1 |= MR1_CHRL_8_BITS;
+		/* By default, select CS8 */
+		tty->termios.c_cflag = (cflag & ~CSIZE) | CS8;
+		break;
+	}
+
+	/* Set Parity */
+	if (cflag & PARENB)
+		if (cflag & PARODD)
+			mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD;
+		else
+			mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN;
+	else
+		mr1 |= MR1_PARITY_OFF;
+
+	/* Mark or space parity is not supported */
+	tty->termios.c_cflag &= ~CMSPAR;
+
+	/* Set stop bits */
+	if (cflag & CSTOPB)
+		mr2 |= MR2_STOP_BITS_LENGTH_2;
+	else
+		mr2 |= MR2_STOP_BITS_LENGTH_1;
+
+	/* Set the flow control */
+	switch (channel->board_id) {
+	case IPACK1_DEVICE_ID_SBS_OCTAL_232:
+		if (cflag & CRTSCTS) {
+			mr1 |= MR1_RxRTS_CONTROL_ON;
+			mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
+		} else {
+			mr1 |= MR1_RxRTS_CONTROL_OFF;
+			mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+		}
+		break;
+	case IPACK1_DEVICE_ID_SBS_OCTAL_422:
+		mr1 |= MR1_RxRTS_CONTROL_OFF;
+		mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+		break;
+	case IPACK1_DEVICE_ID_SBS_OCTAL_485:
+		mr1 |= MR1_RxRTS_CONTROL_OFF;
+		mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
+		break;
+	default:
+		return;
+		break;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	tty_termios_encode_baud_rate(&tty->termios, baud, baud);
+
+	/* Set baud rate */
+	switch (baud) {
+	case 75:
+		csr |= TX_CLK_75 | RX_CLK_75;
+		break;
+	case 110:
+		csr |= TX_CLK_110 | RX_CLK_110;
+		break;
+	case 150:
+		csr |= TX_CLK_150 | RX_CLK_150;
+		break;
+	case 300:
+		csr |= TX_CLK_300 | RX_CLK_300;
+		break;
+	case 600:
+		csr |= TX_CLK_600 | RX_CLK_600;
+		break;
+	case 1200:
+		csr |= TX_CLK_1200 | RX_CLK_1200;
+		break;
+	case 1800:
+		csr |= TX_CLK_1800 | RX_CLK_1800;
+		break;
+	case 2000:
+		csr |= TX_CLK_2000 | RX_CLK_2000;
+		break;
+	case 2400:
+		csr |= TX_CLK_2400 | RX_CLK_2400;
+		break;
+	case 4800:
+		csr |= TX_CLK_4800  | RX_CLK_4800;
+		break;
+	case 9600:
+		csr |= TX_CLK_9600  | RX_CLK_9600;
+		break;
+	case 19200:
+		csr |= TX_CLK_19200 | RX_CLK_19200;
+		break;
+	case 38400:
+	default:
+		csr |= TX_CLK_38400 | RX_CLK_38400;
+		/* In case of default, we establish 38400 bps */
+		tty_termios_encode_baud_rate(&tty->termios, 38400, 38400);
+		break;
+	}
+
+	mr1 |= MR1_ERROR_CHAR;
+	mr1 |= MR1_RxINT_RxRDY;
+
+	/* Write the control registers */
+	iowrite8(mr1, &channel->regs->w.mr);
+	iowrite8(mr2, &channel->regs->w.mr);
+	iowrite8(csr, &channel->regs->w.csr);
+
+	/* Enable again the RX */
+	iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+}
+
+static void ipoctal_hangup(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	if (channel == NULL)
+		return;
+
+	spin_lock_irqsave(&channel->lock, flags);
+	channel->nb_bytes = 0;
+	channel->pointer_read = 0;
+	channel->pointer_write = 0;
+	spin_unlock_irqrestore(&channel->lock, flags);
+
+	tty_port_hangup(&channel->tty_port);
+
+	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+
+	clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags);
+	wake_up_interruptible(&channel->tty_port.open_wait);
+}
+
+static const struct tty_operations ipoctal_fops = {
+	.ioctl =		NULL,
+	.open =			ipoctal_open,
+	.close =		ipoctal_close,
+	.write =		ipoctal_write_tty,
+	.set_termios =		ipoctal_set_termios,
+	.write_room =		ipoctal_write_room,
+	.chars_in_buffer =	ipoctal_chars_in_buffer,
+	.get_icount =		ipoctal_get_icount,
+	.hangup =		ipoctal_hangup,
+};
+
+static int ipoctal_probe(struct ipack_device *dev)
+{
+	int res;
+	struct ipoctal *ipoctal;
+
+	ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL);
+	if (ipoctal == NULL)
+		return -ENOMEM;
+
+	ipoctal->dev = dev;
+	res = ipoctal_inst_slot(ipoctal, dev->bus->bus_nr, dev->slot);
+	if (res)
+		goto out_uninst;
+
+	dev_set_drvdata(&dev->dev, ipoctal);
+	return 0;
+
+out_uninst:
+	kfree(ipoctal);
+	return res;
+}
+
+static void __ipoctal_remove(struct ipoctal *ipoctal)
+{
+	int i;
+
+	ipoctal->dev->bus->ops->free_irq(ipoctal->dev);
+
+	for (i = 0; i < NR_CHANNELS; i++) {
+		struct ipoctal_channel *channel = &ipoctal->channel[i];
+		tty_unregister_device(ipoctal->tty_drv, i);
+		tty_port_free_xmit_buf(&channel->tty_port);
+	}
+
+	tty_unregister_driver(ipoctal->tty_drv);
+	put_tty_driver(ipoctal->tty_drv);
+	kfree(ipoctal);
+}
+
+static void ipoctal_remove(struct ipack_device *idev)
+{
+	__ipoctal_remove(dev_get_drvdata(&idev->dev));
+}
+
+static DEFINE_IPACK_DEVICE_TABLE(ipoctal_ids) = {
+	{ IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+			IPACK1_DEVICE_ID_SBS_OCTAL_232) },
+	{ IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+			IPACK1_DEVICE_ID_SBS_OCTAL_422) },
+	{ IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+			IPACK1_DEVICE_ID_SBS_OCTAL_485) },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(ipack, ipoctal_ids);
+
+static const struct ipack_driver_ops ipoctal_drv_ops = {
+	.probe  = ipoctal_probe,
+	.remove = ipoctal_remove,
+};
+
+static struct ipack_driver driver = {
+	.ops      = &ipoctal_drv_ops,
+	.id_table = ipoctal_ids,
+};
+
+static int __init ipoctal_init(void)
+{
+	return ipack_driver_register(&driver, THIS_MODULE, KBUILD_MODNAME);
+}
+
+static void __exit ipoctal_exit(void)
+{
+	ipack_driver_unregister(&driver);
+}
+
+MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver");
+MODULE_LICENSE("GPL");
+
+module_init(ipoctal_init);
+module_exit(ipoctal_exit);