summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
authorMartin Kelly <martin@martingkelly.com>2019-02-03 00:55:57 +0300
committerJonathan Cameron <Jonathan.Cameron@huawei.com>2019-02-09 18:14:42 +0300
commit895bf81e6bbfbcd37442aca87ad6ae44be34c54d (patch)
tree831632ee41f213ae46ff1cea63caa542eb40cead /drivers/iio
parent3740232925a3fee75f47ba51343d695b39d9cee6 (diff)
downloadlinux-895bf81e6bbfbcd37442aca87ad6ae44be34c54d.tar.xz
iio:bmi160: add drdy interrupt support
Add interrupt support for the data ready signal on the BMI160, which fires an interrupt whenever new accelerometer/gyroscope data is ready to read. Signed-off-by: Martin Kelly <martin@martingkelly.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/imu/bmi160/bmi160.h11
-rw-r--r--drivers/iio/imu/bmi160/bmi160_core.c270
2 files changed, 278 insertions, 3 deletions
diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h
index 2351049d930b..621f5309d735 100644
--- a/drivers/iio/imu/bmi160/bmi160.h
+++ b/drivers/iio/imu/bmi160/bmi160.h
@@ -2,9 +2,20 @@
#ifndef BMI160_H_
#define BMI160_H_
+#include <linux/iio/iio.h>
+
+struct bmi160_data {
+ struct regmap *regmap;
+ struct iio_trigger *trig;
+};
+
extern const struct regmap_config bmi160_regmap_config;
int bmi160_core_probe(struct device *dev, struct regmap *regmap,
const char *name, bool use_spi);
+int bmi160_enable_irq(struct regmap *regmap, bool enable);
+
+int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type);
+
#endif /* BMI160_H_ */
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
index ce61026d84c3..007f7c532ac4 100644
--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -3,21 +3,25 @@
* BMI160 - Bosch IMU (accel, gyro plus external magnetometer)
*
* Copyright (c) 2016, Intel Corporation.
+ * Copyright (c) 2019, Martin Kelly.
*
* IIO core driver for BMI160, with support for I2C/SPI busses
*
- * TODO: magnetometer, interrupts, hardware FIFO
+ * TODO: magnetometer, hardware FIFO
*/
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/acpi.h>
#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
#include <linux/iio/iio.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/buffer.h>
#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
#include "bmi160.h"
@@ -61,8 +65,32 @@
#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17
#define BMI160_CMD_SOFTRESET 0xB6
+#define BMI160_REG_INT_EN 0x51
+#define BMI160_DRDY_INT_EN BIT(4)
+
+#define BMI160_REG_INT_OUT_CTRL 0x53
+#define BMI160_INT_OUT_CTRL_MASK 0x0f
+#define BMI160_INT1_OUT_CTRL_SHIFT 0
+#define BMI160_INT2_OUT_CTRL_SHIFT 4
+#define BMI160_EDGE_TRIGGERED BIT(0)
+#define BMI160_ACTIVE_HIGH BIT(1)
+#define BMI160_OPEN_DRAIN BIT(2)
+#define BMI160_OUTPUT_EN BIT(3)
+
+#define BMI160_REG_INT_LATCH 0x54
+#define BMI160_INT1_LATCH_MASK BIT(4)
+#define BMI160_INT2_LATCH_MASK BIT(5)
+
+/* INT1 and INT2 are in the opposite order as in INT_OUT_CTRL! */
+#define BMI160_REG_INT_MAP 0x56
+#define BMI160_INT1_MAP_DRDY_EN 0x80
+#define BMI160_INT2_MAP_DRDY_EN 0x08
+
#define BMI160_REG_DUMMY 0x7F
+#define BMI160_NORMAL_WRITE_USLEEP 2
+#define BMI160_SUSPENDED_WRITE_USLEEP 450
+
#define BMI160_ACCEL_PMU_MIN_USLEEP 3800
#define BMI160_GYRO_PMU_MIN_USLEEP 80000
#define BMI160_SOFTRESET_USLEEP 1000
@@ -105,8 +133,9 @@ enum bmi160_sensor_type {
BMI160_NUM_SENSORS /* must be last */
};
-struct bmi160_data {
- struct regmap *regmap;
+enum bmi160_int_pin {
+ BMI160_PIN_INT1,
+ BMI160_PIN_INT2
};
const struct regmap_config bmi160_regmap_config = {
@@ -495,6 +524,186 @@ static const char *bmi160_match_acpi_device(struct device *dev)
return dev_name(dev);
}
+static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg,
+ unsigned int mask, unsigned int bits,
+ unsigned int write_usleep)
+{
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ val = (val & ~mask) | bits;
+
+ ret = regmap_write(regmap, reg, val);
+ if (ret)
+ return ret;
+
+ /*
+ * We need to wait after writing before we can write again. See the
+ * datasheet, page 93.
+ */
+ usleep_range(write_usleep, write_usleep + 1000);
+
+ return 0;
+}
+
+static int bmi160_config_pin(struct regmap *regmap, enum bmi160_int_pin pin,
+ bool open_drain, u8 irq_mask,
+ unsigned long write_usleep)
+{
+ int ret;
+ struct device *dev = regmap_get_device(regmap);
+ u8 int_out_ctrl_shift;
+ u8 int_latch_mask;
+ u8 int_map_mask;
+ u8 int_out_ctrl_mask;
+ u8 int_out_ctrl_bits;
+ const char *pin_name;
+
+ switch (pin) {
+ case BMI160_PIN_INT1:
+ int_out_ctrl_shift = BMI160_INT1_OUT_CTRL_SHIFT;
+ int_latch_mask = BMI160_INT1_LATCH_MASK;
+ int_map_mask = BMI160_INT1_MAP_DRDY_EN;
+ break;
+ case BMI160_PIN_INT2:
+ int_out_ctrl_shift = BMI160_INT2_OUT_CTRL_SHIFT;
+ int_latch_mask = BMI160_INT2_LATCH_MASK;
+ int_map_mask = BMI160_INT2_MAP_DRDY_EN;
+ break;
+ }
+ int_out_ctrl_mask = BMI160_INT_OUT_CTRL_MASK << int_out_ctrl_shift;
+
+ /*
+ * Enable the requested pin with the right settings:
+ * - Push-pull/open-drain
+ * - Active low/high
+ * - Edge/level triggered
+ */
+ int_out_ctrl_bits = BMI160_OUTPUT_EN;
+ if (open_drain)
+ /* Default is push-pull. */
+ int_out_ctrl_bits |= BMI160_OPEN_DRAIN;
+ int_out_ctrl_bits |= irq_mask;
+ int_out_ctrl_bits <<= int_out_ctrl_shift;
+
+ ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_OUT_CTRL,
+ int_out_ctrl_mask, int_out_ctrl_bits,
+ write_usleep);
+ if (ret)
+ return ret;
+
+ /* Set the pin to input mode with no latching. */
+ ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_LATCH,
+ int_latch_mask, int_latch_mask,
+ write_usleep);
+ if (ret)
+ return ret;
+
+ /* Map interrupts to the requested pin. */
+ ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_MAP,
+ int_map_mask, int_map_mask,
+ write_usleep);
+ if (ret) {
+ switch (pin) {
+ case BMI160_PIN_INT1:
+ pin_name = "INT1";
+ break;
+ case BMI160_PIN_INT2:
+ pin_name = "INT2";
+ break;
+ }
+ dev_err(dev, "Failed to configure %s IRQ pin", pin_name);
+ }
+
+ return ret;
+}
+
+int bmi160_enable_irq(struct regmap *regmap, bool enable)
+{
+ unsigned int enable_bit = 0;
+
+ if (enable)
+ enable_bit = BMI160_DRDY_INT_EN;
+
+ return bmi160_write_conf_reg(regmap, BMI160_REG_INT_EN,
+ BMI160_DRDY_INT_EN, enable_bit,
+ BMI160_NORMAL_WRITE_USLEEP);
+}
+EXPORT_SYMBOL(bmi160_enable_irq);
+
+static int bmi160_get_irq(struct device_node *of_node, enum bmi160_int_pin *pin)
+{
+ int irq;
+
+ /* Use INT1 if possible, otherwise fall back to INT2. */
+ irq = of_irq_get_byname(of_node, "INT1");
+ if (irq > 0) {
+ *pin = BMI160_PIN_INT1;
+ return irq;
+ }
+
+ irq = of_irq_get_byname(of_node, "INT2");
+ if (irq > 0)
+ *pin = BMI160_PIN_INT2;
+
+ return irq;
+}
+
+static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type,
+ enum bmi160_int_pin pin)
+{
+ bool open_drain;
+ u8 irq_mask;
+ struct bmi160_data *data = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(data->regmap);
+
+ /* Level-triggered, active-low is the default if we set all zeroes. */
+ if (irq_type == IRQF_TRIGGER_RISING)
+ irq_mask = BMI160_ACTIVE_HIGH | BMI160_EDGE_TRIGGERED;
+ else if (irq_type == IRQF_TRIGGER_FALLING)
+ irq_mask = BMI160_EDGE_TRIGGERED;
+ else if (irq_type == IRQF_TRIGGER_HIGH)
+ irq_mask = BMI160_ACTIVE_HIGH;
+ else if (irq_type == IRQF_TRIGGER_LOW)
+ irq_mask = 0;
+ else {
+ dev_err(&indio_dev->dev,
+ "Invalid interrupt type 0x%x specified\n", irq_type);
+ return -EINVAL;
+ }
+
+ open_drain = of_property_read_bool(dev->of_node, "drive-open-drain");
+
+ return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask,
+ BMI160_NORMAL_WRITE_USLEEP);
+}
+
+static int bmi160_setup_irq(struct iio_dev *indio_dev, int irq,
+ enum bmi160_int_pin pin)
+{
+ struct irq_data *desc;
+ u32 irq_type;
+ int ret;
+
+ desc = irq_get_irq_data(irq);
+ if (!desc) {
+ dev_err(&indio_dev->dev, "Could not find IRQ %d\n", irq);
+ return -EINVAL;
+ }
+
+ irq_type = irqd_get_trigger_type(desc);
+
+ ret = bmi160_config_device_irq(indio_dev, irq_type, pin);
+ if (ret)
+ return ret;
+
+ return bmi160_probe_trigger(indio_dev, irq, irq_type);
+}
+
static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
{
int ret;
@@ -539,6 +748,49 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
return 0;
}
+static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool enable)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct bmi160_data *data = iio_priv(indio_dev);
+
+ return bmi160_enable_irq(data->regmap, enable);
+}
+
+static const struct iio_trigger_ops bmi160_trigger_ops = {
+ .set_trigger_state = &bmi160_data_rdy_trigger_set_state,
+};
+
+int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type)
+{
+ struct bmi160_data *data = iio_priv(indio_dev);
+ int ret;
+
+ data->trig = devm_iio_trigger_alloc(&indio_dev->dev, "%s-dev%d",
+ indio_dev->name, indio_dev->id);
+
+ if (data->trig == NULL)
+ return -ENOMEM;
+
+ ret = devm_request_irq(&indio_dev->dev, irq,
+ &iio_trigger_generic_data_rdy_poll,
+ irq_type, "bmi160", data->trig);
+ if (ret < 0)
+ return ret;
+
+ data->trig->dev.parent = regmap_get_device(data->regmap);
+ data->trig->ops = &bmi160_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, indio_dev);
+
+ ret = devm_iio_trigger_register(&indio_dev->dev, data->trig);
+ if (ret)
+ return ret;
+
+ indio_dev->trig = iio_trigger_get(data->trig);
+
+ return 0;
+}
+
static void bmi160_chip_uninit(void *data)
{
struct bmi160_data *bmi_data = data;
@@ -552,6 +804,8 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
{
struct iio_dev *indio_dev;
struct bmi160_data *data;
+ int irq;
+ enum bmi160_int_pin int_pin;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -585,6 +839,16 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
if (ret < 0)
return ret;
+ irq = bmi160_get_irq(dev->of_node, &int_pin);
+ if (irq > 0) {
+ ret = bmi160_setup_irq(indio_dev, irq, int_pin);
+ if (ret)
+ dev_err(&indio_dev->dev, "Failed to setup IRQ %d\n",
+ irq);
+ } else {
+ dev_info(&indio_dev->dev, "Not setting up IRQ trigger\n");
+ }
+
ret = devm_iio_device_register(dev, indio_dev);
if (ret < 0)
return ret;