Merge tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

* tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (67 commits)
  iio: chemical: sps30: remove printk format specifier
  staging: iio: frequency: ad9833: Load clock using clock framework
  staging: iio: frequency: ad9833: Get frequency value statically
  dt-bindings: iio: light: Add max44009
  iio: light: add driver for MAX44009
  dt-bindings: iio: adc: Add docs for AD7768-1
  iio: adc: Add AD7768-1 ADC basic support
  staging: iio: cdc: ad7152: remove driver completely
  iio: imu: mpu6050: Add support for the ICM 20602 IMU
  dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  dt-bindings: iio: pressure: add LPS22HH bindings
  iio: st_accel: use ACPI orientation data
  iio: adc: add NPCM ADC driver
  dt-binding: iio: add NPCM ADC documentation
  iio: chemical: sps30: allow changing self cleaning period
  dt-bindings: iio: chemical: Add bindings for bme680
  iio: chemical: bme680: Add device-tree support
  iio:st_pressure:initial lps22hh sensor support
  iio: accell: mma8452: add vdd/vddio regulator operation support
  dt-bindings: iio: accel: mma8452: add power supplies property
  ...

41 files changed, 4455 insertions, 52 deletions

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 421a0a8a1379..302781126bc6 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -31,6 +31,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 
 #define MMA8452_STATUS				0x00
 #define  MMA8452_STATUS_DRDY			(BIT(2) | BIT(1) | BIT(0))
@@ -107,6 +108,8 @@ struct mma8452_data {
 	u8 data_cfg;
 	const struct mma_chip_info *chip_info;
 	int sleep_val;
+	struct regulator *vdd_reg;
+	struct regulator *vddio_reg;
 };
 
  /**
@@ -1534,9 +1537,39 @@ static int mma8452_probe(struct i2c_client *client,
 	mutex_init(&data->lock);
 	data->chip_info = match->data;
 
+	data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(data->vdd_reg)) {
+		if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(&client->dev, "failed to get VDD regulator!\n");
+		return PTR_ERR(data->vdd_reg);
+	}
+
+	data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
+	if (IS_ERR(data->vddio_reg)) {
+		if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(&client->dev, "failed to get VDDIO regulator!\n");
+		return PTR_ERR(data->vddio_reg);
+	}
+
+	ret = regulator_enable(data->vdd_reg);
+	if (ret) {
+		dev_err(&client->dev, "failed to enable VDD regulator!\n");
+		return ret;
+	}
+
+	ret = regulator_enable(data->vddio_reg);
+	if (ret) {
+		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+		goto disable_regulator_vdd;
+	}
+
 	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
 	if (ret < 0)
-		return ret;
+		goto disable_regulators;
 
 	switch (ret) {
 	case MMA8451_DEVICE_ID:
@@ -1549,7 +1582,8 @@ static int mma8452_probe(struct i2c_client *client,
 			break;
 		/* else: fall through */
 	default:
-		return -ENODEV;
+		ret = -ENODEV;
+		goto disable_regulators;
 	}
 
 	dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
@@ -1566,13 +1600,13 @@ static int mma8452_probe(struct i2c_client *client,
 
 	ret = mma8452_reset(client);
 	if (ret < 0)
-		return ret;
+		goto disable_regulators;
 
 	data->data_cfg = MMA8452_DATA_CFG_FS_2G;
 	ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
 					data->data_cfg);
 	if (ret < 0)
-		return ret;
+		goto disable_regulators;
 
 	/*
 	 * By default set transient threshold to max to avoid events if
@@ -1581,7 +1615,7 @@ static int mma8452_probe(struct i2c_client *client,
 	ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
 					MMA8452_TRANSIENT_THS_MASK);
 	if (ret < 0)
-		return ret;
+		goto disable_regulators;
 
 	if (client->irq) {
 		int irq2;
@@ -1595,7 +1629,7 @@ static int mma8452_probe(struct i2c_client *client,
 						MMA8452_CTRL_REG5,
 						data->chip_info->all_events);
 			if (ret < 0)
-				return ret;
+				goto disable_regulators;
 
 			dev_dbg(&client->dev, "using interrupt line INT1\n");
 		}
@@ -1604,11 +1638,11 @@ static int mma8452_probe(struct i2c_client *client,
 					MMA8452_CTRL_REG4,
 					data->chip_info->enabled_events);
 		if (ret < 0)
-			return ret;
+			goto disable_regulators;
 
 		ret = mma8452_trigger_setup(indio_dev);
 		if (ret < 0)
-			return ret;
+			goto disable_regulators;
 	}
 
 	data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
@@ -1661,12 +1695,19 @@ buffer_cleanup:
 trigger_cleanup:
 	mma8452_trigger_cleanup(indio_dev);
 
+disable_regulators:
+	regulator_disable(data->vddio_reg);
+
+disable_regulator_vdd:
+	regulator_disable(data->vdd_reg);
+
 	return ret;
 }
 
 static int mma8452_remove(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mma8452_data *data = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
 
@@ -1678,6 +1719,9 @@ static int mma8452_remove(struct i2c_client *client)
 	mma8452_trigger_cleanup(indio_dev);
 	mma8452_standby(iio_priv(indio_dev));
 
+	regulator_disable(data->vddio_reg);
+	regulator_disable(data->vdd_reg);
+
 	return 0;
 }
 
@@ -1696,6 +1740,18 @@ static int mma8452_runtime_suspend(struct device *dev)
 		return -EAGAIN;
 	}
 
+	ret = regulator_disable(data->vddio_reg);
+	if (ret) {
+		dev_err(dev, "failed to disable VDDIO regulator\n");
+		return ret;
+	}
+
+	ret = regulator_disable(data->vdd_reg);
+	if (ret) {
+		dev_err(dev, "failed to disable VDD regulator\n");
+		return ret;
+	}
+
 	return 0;
 }
 
@@ -1705,9 +1761,22 @@ static int mma8452_runtime_resume(struct device *dev)
 	struct mma8452_data *data = iio_priv(indio_dev);
 	int ret, sleep_val;
 
+	ret = regulator_enable(data->vdd_reg);
+	if (ret) {
+		dev_err(dev, "failed to enable VDD regulator\n");
+		return ret;
+	}
+
+	ret = regulator_enable(data->vddio_reg);
+	if (ret) {
+		dev_err(dev, "failed to enable VDDIO regulator\n");
+		regulator_disable(data->vdd_reg);
+		return ret;
+	}
+
 	ret = mma8452_active(data);
 	if (ret < 0)
-		return ret;
+		goto runtime_resume_failed;
 
 	ret = mma8452_get_odr_index(data);
 	sleep_val = 1000 / mma8452_samp_freq[ret][0];
@@ -1717,25 +1786,17 @@ static int mma8452_runtime_resume(struct device *dev)
 		msleep_interruptible(sleep_val);
 
 	return 0;
-}
-#endif
 
-#ifdef CONFIG_PM_SLEEP
-static int mma8452_suspend(struct device *dev)
-{
-	return mma8452_standby(iio_priv(i2c_get_clientdata(
-		to_i2c_client(dev))));
-}
+runtime_resume_failed:
+	regulator_disable(data->vddio_reg);
+	regulator_disable(data->vdd_reg);
 
-static int mma8452_resume(struct device *dev)
-{
-	return mma8452_active(iio_priv(i2c_get_clientdata(
-		to_i2c_client(dev))));
+	return ret;
 }
 #endif
 
 static const struct dev_pm_ops mma8452_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(mma8452_suspend, mma8452_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(mma8452_runtime_suspend,
 			   mma8452_runtime_resume, NULL)
 };
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index f7b471121508..a3c0916479fa 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/mutex.h>
@@ -918,12 +919,167 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
 #define ST_ACCEL_TRIGGER_OPS NULL
 #endif
 
+static const struct iio_mount_matrix *
+get_mount_matrix(const struct iio_dev *indio_dev,
+		 const struct iio_chan_spec *chan)
+{
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	return adata->mount_matrix;
+}
+
+static const struct iio_chan_spec_ext_info mount_matrix_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, get_mount_matrix),
+	{ },
+};
+
+/* Read ST-specific _ONT orientation data from ACPI and generate an
+ * appropriate mount matrix.
+ */
+static int apply_acpi_orientation(struct iio_dev *indio_dev,
+				  struct iio_chan_spec *channels)
+{
+#ifdef CONFIG_ACPI
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_device *adev;
+	union acpi_object *ont;
+	union acpi_object *elements;
+	acpi_status status;
+	int ret = -EINVAL;
+	unsigned int val;
+	int i, j;
+	int final_ont[3][3] = { { 0 }, };
+
+	/* For some reason, ST's _ONT translation does not apply directly
+	 * to the data read from the sensor. Another translation must be
+	 * performed first, as described by the matrix below. Perhaps
+	 * ST required this specific translation for the first product
+	 * where the device was mounted?
+	 */
+	const int default_ont[3][3] = {
+		{  0,  1,  0 },
+		{ -1,  0,  0 },
+		{  0,  0, -1 },
+	};
+
+
+	adev = ACPI_COMPANION(adata->dev);
+	if (!adev)
+		return 0;
+
+	/* Read _ONT data, which should be a package of 6 integers. */
+	status = acpi_evaluate_object(adev->handle, "_ONT", NULL, &buffer);
+	if (status == AE_NOT_FOUND) {
+		return 0;
+	} else if (ACPI_FAILURE(status)) {
+		dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n",
+			 status);
+		return status;
+	}
+
+	ont = buffer.pointer;
+	if (ont->type != ACPI_TYPE_PACKAGE || ont->package.count != 6)
+		goto out;
+
+	/* The first 3 integers provide axis order information.
+	 * e.g. 0 1 2 would indicate normal X,Y,Z ordering.
+	 * e.g. 1 0 2 indicates that data arrives in order Y,X,Z.
+	 */
+	elements = ont->package.elements;
+	for (i = 0; i < 3; i++) {
+		if (elements[i].type != ACPI_TYPE_INTEGER)
+			goto out;
+
+		val = elements[i].integer.value;
+		if (val < 0 || val > 2)
+			goto out;
+
+		/* Avoiding full matrix multiplication, we simply reorder the
+		 * columns in the default_ont matrix according to the
+		 * ordering provided by _ONT.
+		 */
+		final_ont[0][i] = default_ont[0][val];
+		final_ont[1][i] = default_ont[1][val];
+		final_ont[2][i] = default_ont[2][val];
+	}
+
+	/* The final 3 integers provide sign flip information.
+	 * 0 means no change, 1 means flip.
+	 * e.g. 0 0 1 means that Z data should be sign-flipped.
+	 * This is applied after the axis reordering from above.
+	 */
+	elements += 3;
+	for (i = 0; i < 3; i++) {
+		if (elements[i].type != ACPI_TYPE_INTEGER)
+			goto out;
+
+		val = elements[i].integer.value;
+		if (val != 0 && val != 1)
+			goto out;
+		if (!val)
+			continue;
+
+		/* Flip the values in the indicated column */
+		final_ont[0][i] *= -1;
+		final_ont[1][i] *= -1;
+		final_ont[2][i] *= -1;
+	}
+
+	/* Convert our integer matrix to a string-based iio_mount_matrix */
+	adata->mount_matrix = devm_kmalloc(&indio_dev->dev,
+					   sizeof(*adata->mount_matrix),
+					   GFP_KERNEL);
+	if (!adata->mount_matrix) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < 3; i++) {
+		for (j = 0; j < 3; j++) {
+			int matrix_val = final_ont[i][j];
+			char *str_value;
+
+			switch (matrix_val) {
+			case -1:
+				str_value = "-1";
+				break;
+			case 0:
+				str_value = "0";
+				break;
+			case 1:
+				str_value = "1";
+				break;
+			default:
+				goto out;
+			}
+			adata->mount_matrix->rotation[i * 3 + j] = str_value;
+		}
+	}
+
+	/* Expose the mount matrix via ext_info */
+	for (i = 0; i < indio_dev->num_channels; i++)
+		channels[i].ext_info = mount_matrix_ext_info;
+
+	ret = 0;
+	dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n");
+
+out:
+	kfree(buffer.pointer);
+	return ret;
+#else /* !CONFIG_ACPI */
+	return 0;
+#endif
+}
+
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	struct st_sensors_platform_data *pdata =
 		(struct st_sensors_platform_data *)adata->dev->platform_data;
 	int irq = adata->get_irq_data_ready(indio_dev);
+	struct iio_chan_spec *channels;
+	size_t channels_size;
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -942,9 +1098,22 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
 	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
-	indio_dev->channels = adata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
+	channels_size = indio_dev->num_channels * sizeof(struct iio_chan_spec);
+	channels = devm_kmemdup(&indio_dev->dev,
+				adata->sensor_settings->ch,
+				channels_size, GFP_KERNEL);
+	if (!channels) {
+		err = -ENOMEM;
+		goto st_accel_power_off;
+	}
+
+	if (apply_acpi_orientation(indio_dev, channels))
+		dev_warn(&indio_dev->dev,
+			 "failed to apply ACPI orientation data: %d\n", err);
+
+	indio_dev->channels = channels;
 	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
 					&adata->sensor_settings->fs.fs_avl[0];
 	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7a3ca4ec0cb7..46ed6fa7e3f3 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -69,6 +69,33 @@ config AD7476
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7476.
 
+config AD7606
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config AD7606_IFACE_PARALLEL
+	tristate "Analog Devices AD7606 ADC driver with parallel interface support"
+	depends on HAS_IOMEM
+	select AD7606
+	help
+	  Say yes here to build parallel interface support for Analog Devices:
+	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7606_parallel.
+
+config AD7606_IFACE_SPI
+	tristate "Analog Devices AD7606 ADC driver with spi interface support"
+	depends on SPI
+	select AD7606
+	help
+	  Say yes here to build spi interface support for Analog Devices:
+	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7606_spi.
+
 config AD7766
 	tristate "Analog Devices AD7766/AD7767 ADC driver"
 	depends on SPI_MASTER
@@ -81,6 +108,19 @@ config AD7766
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7766.
 
+config AD7768_1
+	tristate "Analog Devices AD7768-1 ADC driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Analog Devices AD7768-1 SPI
+	  simultaneously sampling sigma-delta analog to digital converter (ADC).
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad7768-1.
+
 config AD7791
 	tristate "Analog Devices AD7791 ADC driver"
 	depends on SPI
@@ -576,6 +616,16 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config NPCM_ADC
+	tristate "Nuvoton NPCM ADC driver"
+	depends on ARCH_NPCM || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say yes here to build support for Nuvoton NPCM ADC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called npcm_adc.
+
 config PALMAS_GPADC
 	tristate "TI Palmas General Purpose ADC"
 	depends on MFD_PALMAS
@@ -908,6 +958,16 @@ config TI_ADS8688
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-ads8688.
 
+config TI_ADS124S08
+	tristate "Texas Instruments ADS124S08"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS124S08
+	  and ADS124S06 ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads124s08.
+
 config TI_AM335X_ADC
 	tristate "TI's AM335X ADC driver"
 	depends on MFD_TI_AM335X_TSCADC && HAS_DMA
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 07df37f621bd..79d6511f0af3 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -11,7 +11,11 @@ obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7298) += ad7298.o
 obj-$(CONFIG_AD7923) += ad7923.o
 obj-$(CONFIG_AD7476) += ad7476.o
+obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
+obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
+obj-$(CONFIG_AD7606) += ad7606.o
 obj-$(CONFIG_AD7766) += ad7766.o
+obj-$(CONFIG_AD7768_1) += ad7768-1.o
 obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
@@ -55,6 +59,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
 obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
@@ -81,6 +86,7 @@ obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
+obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_TI_TLC4541) += ti-tlc4541.o
 obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
new file mode 100644
index 000000000000..ebb8de03bbce
--- /dev/null
+++ b/drivers/iio/adc/ad7606.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "ad7606.h"
+
+/*
+ * Scales are computed as 5000/32768 and 10000/32768 respectively,
+ * so that when applied to the raw values they provide mV values
+ */
+static const unsigned int scale_avail[2] = {
+	152588, 305176
+};
+
+static const unsigned int ad7606_oversampling_avail[7] = {
+	1, 2, 4, 8, 16, 32, 64,
+};
+
+static int ad7606_reset(struct ad7606_state *st)
+{
+	if (st->gpio_reset) {
+		gpiod_set_value(st->gpio_reset, 1);
+		ndelay(100); /* t_reset >= 100ns */
+		gpiod_set_value(st->gpio_reset, 0);
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int ad7606_read_samples(struct ad7606_state *st)
+{
+	unsigned int num = st->chip_info->num_channels;
+	u16 *data = st->data;
+	int ret;
+
+	/*
+	 * The frstdata signal is set to high while and after reading the sample
+	 * of the first channel and low for all other channels. This can be used
+	 * to check that the incoming data is correctly aligned. During normal
+	 * operation the data should never become unaligned, but some glitch or
+	 * electrostatic discharge might cause an extra read or clock cycle.
+	 * Monitoring the frstdata signal allows to recover from such failure
+	 * situations.
+	 */
+
+	if (st->gpio_frstdata) {
+		ret = st->bops->read_block(st->dev, 1, data);
+		if (ret)
+			return ret;
+
+		if (!gpiod_get_value(st->gpio_frstdata)) {
+			ad7606_reset(st);
+			return -EIO;
+		}
+
+		data++;
+		num--;
+	}
+
+	return st->bops->read_block(st->dev, num, data);
+}
+
+static irqreturn_t ad7606_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = ad7606_read_samples(st);
+	if (ret == 0)
+		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+						   iio_get_time_ns(indio_dev));
+
+	iio_trigger_notify_done(indio_dev->trig);
+	/* The rising edge of the CONVST signal starts a new conversion. */
+	gpiod_set_value(st->gpio_convst, 1);
+
+	mutex_unlock(&st->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	gpiod_set_value(st->gpio_convst, 1);
+	ret = wait_for_completion_timeout(&st->completion,
+					  msecs_to_jiffies(1000));
+	if (!ret) {
+		ret = -ETIMEDOUT;
+		goto error_ret;
+	}
+
+	ret = ad7606_read_samples(st);
+	if (ret == 0)
+		ret = st->data[ch];
+
+error_ret:
+	gpiod_set_value(st->gpio_convst, 0);
+
+	return ret;
+}
+
+static int ad7606_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	int ret;
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = ad7606_scan_direct(indio_dev, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+
+		if (ret < 0)
+			return ret;
+		*val = (short)ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = scale_avail[st->range];
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = st->oversampling;
+		return IIO_VAL_INT;
+	}
+	return -EINVAL;
+}
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	int i, len = 0;
+
+	for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+				 scale_avail[i]);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+static int ad7606_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	DECLARE_BITMAP(values, 3);
+	int i;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&st->lock);
+		i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail));
+		gpiod_set_value(st->gpio_range, i);
+		st->range = i;
+		mutex_unlock(&st->lock);
+
+		return 0;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (val2)
+			return -EINVAL;
+		i = find_closest(val, ad7606_oversampling_avail,
+				 ARRAY_SIZE(ad7606_oversampling_avail));
+
+		values[0] = i;
+
+		mutex_lock(&st->lock);
+		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+				      st->gpio_os->info, values);
+		st->oversampling = ad7606_oversampling_avail[i];
+		mutex_unlock(&st->lock);
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
+
+static struct attribute *ad7606_attributes_os_and_range[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os_and_range = {
+	.attrs = ad7606_attributes_os_and_range,
+};
+
+static struct attribute *ad7606_attributes_os[] = {
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os = {
+	.attrs = ad7606_attributes_os,
+};
+
+static struct attribute *ad7606_attributes_range[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_range = {
+	.attrs = ad7606_attributes_range,
+};
+
+#define AD760X_CHANNEL(num, mask) {				\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = num,					\
+		.address = num,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
+		.info_mask_shared_by_all = mask,		\
+		.scan_index = num,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 16,				\
+			.storagebits = 16,			\
+			.endianness = IIO_CPU,			\
+		},						\
+}
+
+#define AD7605_CHANNEL(num)	\
+	AD760X_CHANNEL(num, 0)
+
+#define AD7606_CHANNEL(num)	\
+	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
+
+static const struct iio_chan_spec ad7605_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+	AD7605_CHANNEL(0),
+	AD7605_CHANNEL(1),
+	AD7605_CHANNEL(2),
+	AD7605_CHANNEL(3),
+};
+
+static const struct iio_chan_spec ad7606_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7606_CHANNEL(0),
+	AD7606_CHANNEL(1),
+	AD7606_CHANNEL(2),
+	AD7606_CHANNEL(3),
+	AD7606_CHANNEL(4),
+	AD7606_CHANNEL(5),
+	AD7606_CHANNEL(6),
+	AD7606_CHANNEL(7),
+};
+
+static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
+	/* More devices added in future */
+	[ID_AD7605_4] = {
+		.channels = ad7605_channels,
+		.num_channels = 5,
+	},
+	[ID_AD7606_8] = {
+		.channels = ad7606_channels,
+		.num_channels = 9,
+		.has_oversampling = true,
+	},
+	[ID_AD7606_6] = {
+		.channels = ad7606_channels,
+		.num_channels = 7,
+		.has_oversampling = true,
+	},
+	[ID_AD7606_4] = {
+		.channels = ad7606_channels,
+		.num_channels = 5,
+		.has_oversampling = true,
+	},
+};
+
+static int ad7606_request_gpios(struct ad7606_state *st)
+{
+	struct device *dev = st->dev;
+
+	st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
+					 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_convst))
+		return PTR_ERR(st->gpio_convst);
+
+	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_reset))
+		return PTR_ERR(st->gpio_reset);
+
+	st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_range))
+		return PTR_ERR(st->gpio_range);
+
+	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(st->gpio_standby))
+		return PTR_ERR(st->gpio_standby);
+
+	st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
+						    GPIOD_IN);
+	if (IS_ERR(st->gpio_frstdata))
+		return PTR_ERR(st->gpio_frstdata);
+
+	if (!st->chip_info->has_oversampling)
+		return 0;
+
+	st->gpio_os = devm_gpiod_get_array_optional(dev,
+						    "adi,oversampling-ratio",
+						    GPIOD_OUT_LOW);
+	return PTR_ERR_OR_ZERO(st->gpio_os);
+}
+
+/*
+ * The BUSY signal indicates when conversions are in progress, so when a rising
+ * edge of CONVST is applied, BUSY goes logic high and transitions low at the
+ * end of the entire conversion process. The falling edge of the BUSY signal
+ * triggers this interrupt.
+ */
+static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (iio_buffer_enabled(indio_dev)) {
+		gpiod_set_value(st->gpio_convst, 0);
+		iio_trigger_poll_chained(st->trig);
+	} else {
+		complete(&st->completion);
+	}
+
+	return IRQ_HANDLED;
+};
+
+static int ad7606_validate_trigger(struct iio_dev *indio_dev,
+				   struct iio_trigger *trig)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	iio_triggered_buffer_postenable(indio_dev);
+	gpiod_set_value(st->gpio_convst, 1);
+
+	return 0;
+}
+
+static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	gpiod_set_value(st->gpio_convst, 0);
+
+	return iio_triggered_buffer_predisable(indio_dev);
+}
+
+static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
+	.postenable = &ad7606_buffer_postenable,
+	.predisable = &ad7606_buffer_predisable,
+};
+
+static const struct iio_info ad7606_info_no_os_or_range = {
+	.read_raw = &ad7606_read_raw,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os_and_range = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_os_and_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_os,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_range = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_trigger_ops ad7606_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+};
+
+static void ad7606_regulator_disable(void *data)
+{
+	struct ad7606_state *st = data;
+
+	regulator_disable(st->reg);
+}
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+		 const char *name, unsigned int id,
+		 const struct ad7606_bus_ops *bops)
+{
+	struct ad7606_state *st;
+	int ret;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+
+	st->dev = dev;
+	mutex_init(&st->lock);
+	st->bops = bops;
+	st->base_address = base_address;
+	/* tied to logic low, analog input range is +/- 5V */
+	st->range = 0;
+	st->oversampling = 1;
+
+	st->reg = devm_regulator_get(dev, "avcc");
+	if (IS_ERR(st->reg))
+		return PTR_ERR(st->reg);
+
+	ret = regulator_enable(st->reg);
+	if (ret) {
+		dev_err(dev, "Failed to enable specified AVcc supply\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st);
+	if (ret)
+		return ret;
+
+	st->chip_info = &ad7606_chip_info_tbl[id];
+
+	ret = ad7606_request_gpios(st);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = dev;
+	if (st->gpio_os) {
+		if (st->gpio_range)
+			indio_dev->info = &ad7606_info_os_and_range;
+		else
+			indio_dev->info = &ad7606_info_os;
+	} else {
+		if (st->gpio_range)
+			indio_dev->info = &ad7606_info_range;
+		else
+			indio_dev->info = &ad7606_info_no_os_or_range;
+	}
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+
+	init_completion(&st->completion);
+
+	ret = ad7606_reset(st);
+	if (ret)
+		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
+
+	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+					  indio_dev->name, indio_dev->id);
+	if (!st->trig)
+		return -ENOMEM;
+
+	st->trig->ops = &ad7606_trigger_ops;
+	st->trig->dev.parent = dev;
+	iio_trigger_set_drvdata(st->trig, indio_dev);
+	ret = devm_iio_trigger_register(dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	ret = devm_request_threaded_irq(dev, irq,
+					NULL,
+					&ad7606_interrupt,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					name, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &ad7606_trigger_handler,
+					      &ad7606_buffer_ops);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(ad7606_probe);
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ad7606_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->gpio_standby) {
+		gpiod_set_value(st->gpio_range, 1);
+		gpiod_set_value(st->gpio_standby, 0);
+	}
+
+	return 0;
+}
+
+static int ad7606_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->gpio_standby) {
+		gpiod_set_value(st->gpio_range, st->range);
+		gpiod_set_value(st->gpio_standby, 1);
+		ad7606_reset(st);
+	}
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
+EXPORT_SYMBOL_GPL(ad7606_pm_ops);
+
+#endif
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
new file mode 100644
index 000000000000..5d12410f68e1
--- /dev/null
+++ b/drivers/iio/adc/ad7606.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AD7606 ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#ifndef IIO_ADC_AD7606_H_
+#define IIO_ADC_AD7606_H_
+
+/**
+ * struct ad7606_chip_info - chip specific information
+ * @channels:		channel specification
+ * @num_channels:	number of channels
+ * @has_oversampling:   whether the device has oversampling support
+ */
+struct ad7606_chip_info {
+	const struct iio_chan_spec	*channels;
+	unsigned int			num_channels;
+	bool				has_oversampling;
+};
+
+/**
+ * struct ad7606_state - driver instance specific data
+ * @dev		pointer to kernel device
+ * @chip_info		entry in the table of chips that describes this device
+ * @reg		regulator info for the the power supply of the device
+ * @bops		bus operations (SPI or parallel)
+ * @range		voltage range selection, selects which scale to apply
+ * @oversampling	oversampling selection
+ * @base_address	address from where to read data in parallel operation
+ * @lock		protect sensor state from concurrent accesses to GPIOs
+ * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
+ * @gpio_reset		GPIO descriptor for device hard-reset
+ * @gpio_range		GPIO descriptor for range selection
+ * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
+ *			controls power-down mode of device
+ * @gpio_frstdata	GPIO descriptor for reading from device when data
+ *			is being read on the first channel
+ * @gpio_os		GPIO descriptors to control oversampling on the device
+ * @complete		completion to indicate end of conversion
+ * @trig		The IIO trigger associated with the device.
+ * @data		buffer for reading data from the device
+ */
+struct ad7606_state {
+	struct device			*dev;
+	const struct ad7606_chip_info	*chip_info;
+	struct regulator		*reg;
+	const struct ad7606_bus_ops	*bops;
+	unsigned int			range;
+	unsigned int			oversampling;
+	void __iomem			*base_address;
+
+	struct mutex			lock; /* protect sensor state */
+	struct gpio_desc		*gpio_convst;
+	struct gpio_desc		*gpio_reset;
+	struct gpio_desc		*gpio_range;
+	struct gpio_desc		*gpio_standby;
+	struct gpio_desc		*gpio_frstdata;
+	struct gpio_descs		*gpio_os;
+	struct iio_trigger		*trig;
+	struct completion		completion;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 * 8 * 16-bit samples + 64-bit timestamp
+	 */
+	unsigned short			data[12] ____cacheline_aligned;
+};
+
+/**
+ * struct ad7606_bus_ops - driver bus operations
+ * @read_block		function pointer for reading blocks of data
+ */
+struct ad7606_bus_ops {
+	/* more methods added in future? */
+	int (*read_block)(struct device *dev, int num, void *data);
+};
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+		 const char *name, unsigned int id,
+		 const struct ad7606_bus_ops *bops);
+
+enum ad7606_supported_device_ids {
+	ID_AD7605_4,
+	ID_AD7606_8,
+	ID_AD7606_6,
+	ID_AD7606_4
+};
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops ad7606_pm_ops;
+#define AD7606_PM_OPS (&ad7606_pm_ops)
+#else
+#define AD7606_PM_OPS NULL
+#endif
+
+#endif /* IIO_ADC_AD7606_H_ */
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
new file mode 100644
index 000000000000..1b08028facde
--- /dev/null
+++ b/drivers/iio/adc/ad7606_par.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 Parallel Interface ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <linux/iio/iio.h>
+#include "ad7606.h"
+
+static int ad7606_par16_read_block(struct device *dev,
+				   int count, void *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	insw((unsigned long)st->base_address, buf, count);
+
+	return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_par16_bops = {
+	.read_block = ad7606_par16_read_block,
+};
+
+static int ad7606_par8_read_block(struct device *dev,
+				  int count, void *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	insb((unsigned long)st->base_address, buf, count * 2);
+
+	return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_par8_bops = {
+	.read_block = ad7606_par8_read_block,
+};
+
+static int ad7606_par_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource *res;
+	void __iomem *addr;
+	resource_size_t remap_size;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq: %d\n", irq);
+		return irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	remap_size = resource_size(res);
+
+	return ad7606_probe(&pdev->dev, irq, addr,
+			    id->name, id->driver_data,
+			    remap_size > 1 ? &ad7606_par16_bops :
+			    &ad7606_par8_bops);
+}
+
+static const struct platform_device_id ad7606_driver_ids[] = {
+	{ .name	= "ad7605-4", .driver_data = ID_AD7605_4, },
+	{ .name	= "ad7606-4", .driver_data = ID_AD7606_4, },
+	{ .name	= "ad7606-6", .driver_data = ID_AD7606_6, },
+	{ .name	= "ad7606-8", .driver_data = ID_AD7606_8, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
+
+static const struct of_device_id ad7606_of_match[] = {
+	{ .compatible = "adi,ad7605-4" },
+	{ .compatible = "adi,ad7606-4" },
+	{ .compatible = "adi,ad7606-6" },
+	{ .compatible = "adi,ad7606-8" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7606_of_match);
+
+static struct platform_driver ad7606_driver = {
+	.probe = ad7606_par_probe,
+	.id_table = ad7606_driver_ids,
+	.driver = {
+		.name = "ad7606",
+		.pm = AD7606_PM_OPS,
+		.of_match_table = ad7606_of_match,
+	},
+};
+module_platform_driver(ad7606_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
new file mode 100644
index 000000000000..4fd0ec36a086
--- /dev/null
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include "ad7606.h"
+
+#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
+
+static int ad7606_spi_read_block(struct device *dev,
+				 int count, void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int i, ret;
+	unsigned short *data = buf;
+	__be16 *bdata = buf;
+
+	ret = spi_read(spi, buf, count * 2);
+	if (ret < 0) {
+		dev_err(&spi->dev, "SPI read error\n");
+		return ret;
+	}
+
+	for (i = 0; i < count; i++)
+		data[i] = be16_to_cpu(bdata[i]);
+
+	return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_spi_bops = {
+	.read_block = ad7606_spi_read_block,
+};
+
+static int ad7606_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	return ad7606_probe(&spi->dev, spi->irq, NULL,
+			    id->name, id->driver_data,
+			    &ad7606_spi_bops);
+}
+
+static const struct spi_device_id ad7606_id_table[] = {
+	{ "ad7605-4", ID_AD7605_4 },
+	{ "ad7606-4", ID_AD7606_4 },
+	{ "ad7606-6", ID_AD7606_6 },
+	{ "ad7606-8", ID_AD7606_8 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7606_id_table);
+
+static const struct of_device_id ad7606_of_match[] = {
+	{ .compatible = "adi,ad7605-4" },
+	{ .compatible = "adi,ad7606-4" },
+	{ .compatible = "adi,ad7606-6" },
+	{ .compatible = "adi,ad7606-8" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7606_of_match);
+
+static struct spi_driver ad7606_driver = {
+	.driver = {
+		.name = "ad7606",
+		.of_match_table = ad7606_of_match,
+		.pm = AD7606_PM_OPS,
+	},
+	.probe = ad7606_spi_probe,
+	.id_table = ad7606_id_table,
+};
+module_spi_driver(ad7606_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
new file mode 100644
index 000000000000..78449e90b2f5
--- /dev/null
+++ b/drivers/iio/adc/ad7768-1.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices AD7768-1 SPI ADC driver
+ *
+ * Copyright 2017 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+/* AD7768 registers definition */
+#define AD7768_REG_CHIP_TYPE		0x3
+#define AD7768_REG_PROD_ID_L		0x4
+#define AD7768_REG_PROD_ID_H		0x5
+#define AD7768_REG_CHIP_GRADE		0x6
+#define AD7768_REG_SCRATCH_PAD		0x0A
+#define AD7768_REG_VENDOR_L		0x0C
+#define AD7768_REG_VENDOR_H		0x0D
+#define AD7768_REG_INTERFACE_FORMAT	0x14
+#define AD7768_REG_POWER_CLOCK		0x15
+#define AD7768_REG_ANALOG		0x16
+#define AD7768_REG_ANALOG2		0x17
+#define AD7768_REG_CONVERSION		0x18
+#define AD7768_REG_DIGITAL_FILTER	0x19
+#define AD7768_REG_SINC3_DEC_RATE_MSB	0x1A
+#define AD7768_REG_SINC3_DEC_RATE_LSB	0x1B
+#define AD7768_REG_DUTY_CYCLE_RATIO	0x1C
+#define AD7768_REG_SYNC_RESET		0x1D
+#define AD7768_REG_GPIO_CONTROL		0x1E
+#define AD7768_REG_GPIO_WRITE		0x1F
+#define AD7768_REG_GPIO_READ		0x20
+#define AD7768_REG_OFFSET_HI		0x21
+#define AD7768_REG_OFFSET_MID		0x22
+#define AD7768_REG_OFFSET_LO		0x23
+#define AD7768_REG_GAIN_HI		0x24
+#define AD7768_REG_GAIN_MID		0x25
+#define AD7768_REG_GAIN_LO		0x26
+#define AD7768_REG_SPI_DIAG_ENABLE	0x28
+#define AD7768_REG_ADC_DIAG_ENABLE	0x29
+#define AD7768_REG_DIG_DIAG_ENABLE	0x2A
+#define AD7768_REG_ADC_DATA		0x2C
+#define AD7768_REG_MASTER_STATUS	0x2D
+#define AD7768_REG_SPI_DIAG_STATUS	0x2E
+#define AD7768_REG_ADC_DIAG_STATUS	0x2F
+#define AD7768_REG_DIG_DIAG_STATUS	0x30
+#define AD7768_REG_MCLK_COUNTER		0x31
+
+/* AD7768_REG_CONVERSION */
+#define AD7768_CONV_MODE_MSK		GENMASK(2, 0)
+#define AD7768_CONV_MODE(x)		FIELD_PREP(AD7768_CONV_MODE_MSK, x)
+
+#define AD7768_RD_FLAG_MSK(x)		(BIT(6) | ((x) & 0x3F))
+#define AD7768_WR_FLAG_MSK(x)		((x) & 0x3F)
+
+enum ad7768_conv_mode {
+	AD7768_CONTINUOUS,
+	AD7768_ONE_SHOT,
+	AD7768_SINGLE,
+	AD7768_PERIODIC,
+	AD7768_STANDBY
+};
+
+enum ad7768_pwrmode {
+	AD7768_ECO_MODE = 0,
+	AD7768_MED_MODE = 2,
+	AD7768_FAST_MODE = 3
+};
+
+static const struct iio_chan_spec ad7768_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = 0,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.storagebits = 32,
+			.shift = 8,
+			.endianness = IIO_BE,
+		},
+	},
+};
+
+struct ad7768_state {
+	struct spi_device *spi;
+	struct regulator *vref;
+	struct mutex lock;
+	struct completion completion;
+	struct iio_trigger *trig;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	union {
+		__be32 d32;
+		u8 d8[2];
+	} data ____cacheline_aligned;
+};
+
+static int ad7768_spi_reg_read(struct ad7768_state *st, unsigned int addr,
+			       unsigned int len)
+{
+	unsigned int shift;
+	int ret;
+
+	shift = 32 - (8 * len);
+	st->data.d8[0] = AD7768_RD_FLAG_MSK(addr);
+
+	ret = spi_write_then_read(st->spi, st->data.d8, 1,
+				  &st->data.d32, len);
+	if (ret < 0)
+		return ret;
+
+	return (be32_to_cpu(st->data.d32) >> shift);
+}
+
+static int ad7768_spi_reg_write(struct ad7768_state *st,
+				unsigned int addr,
+				unsigned int val)
+{
+	st->data.d8[0] = AD7768_WR_FLAG_MSK(addr);
+	st->data.d8[1] = val & 0xFF;
+
+	return spi_write(st->spi, st->data.d8, 2);
+}
+
+static int ad7768_set_mode(struct ad7768_state *st,
+			   enum ad7768_conv_mode mode)
+{
+	int regval;
+
+	regval = ad7768_spi_reg_read(st, AD7768_REG_CONVERSION, 1);
+	if (regval < 0)
+		return regval;
+
+	regval &= ~AD7768_CONV_MODE_MSK;
+	regval |= AD7768_CONV_MODE(mode);
+
+	return ad7768_spi_reg_write(st, AD7768_REG_CONVERSION, regval);
+}
+
+static int ad7768_scan_direct(struct iio_dev *indio_dev)
+{
+	struct ad7768_state *st = iio_priv(indio_dev);
+	int readval, ret;
+
+	reinit_completion(&st->completion);
+
+	ret = ad7768_set_mode(st, AD7768_ONE_SHOT);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&st->completion,
+					  msecs_to_jiffies(1000));
+	if (!ret)
+		return -ETIMEDOUT;
+
+	readval = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
+	if (readval < 0)
+		return readval;
+	/*
+	 * Any SPI configuration of the AD7768-1 can only be
+	 * performed in continuous conversion mode.
+	 */
+	ret = ad7768_set_mode(st, AD7768_CONTINUOUS);
+	if (ret < 0)
+		return ret;
+
+	return readval;
+}
+
+static int ad7768_reg_access(struct iio_dev *indio_dev,
+			     unsigned int reg,
+			     unsigned int writeval,
+			     unsigned int *readval)
+{
+	struct ad7768_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval) {
+		ret = ad7768_spi_reg_read(st, reg, 1);
+		if (ret < 0)
+			goto err_unlock;
+		*readval = ret;
+		ret = 0;
+	} else {
+		ret = ad7768_spi_reg_write(st, reg, writeval);
+	}
+err_unlock:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int ad7768_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad7768_state *st = iio_priv(indio_dev);
+	int scale_uv, ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = ad7768_scan_direct(indio_dev);
+		if (ret >= 0)
+			*val = ret;
+
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		scale_uv = regulator_get_voltage(st->vref);
+		if (scale_uv < 0)
+			return scale_uv;
+
+		*val = (scale_uv * 2) / 1000;
+		*val2 = chan->scan_type.realbits;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info ad7768_info = {
+	.read_raw = &ad7768_read_raw,
+	.debugfs_reg_access = &ad7768_reg_access,
+};
+
+static int ad7768_setup(struct ad7768_state *st)
+{
+	int ret;
+
+	/*
+	 * Two writes to the SPI_RESET[1:0] bits are required to initiate
+	 * a software reset. The bits must first be set to 11, and then
+	 * to 10. When the sequence is detected, the reset occurs.
+	 * See the datasheet, page 70.
+	 */
+	ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x3);
+	if (ret)
+		return ret;
+
+	ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x2);
+	if (ret)
+		return ret;
+
+	/* Set power mode to fast */
+	return ad7768_spi_reg_write(st, AD7768_REG_POWER_CLOCK,
+				    AD7768_FAST_MODE);
+}
+
+static irqreturn_t ad7768_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7768_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = spi_read(st->spi, &st->data.d32, 3);
+	if (ret < 0)
+		goto err_unlock;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->data.d32,
+					   iio_get_time_ns(indio_dev));
+
+	iio_trigger_notify_done(indio_dev->trig);
+err_unlock:
+	mutex_unlock(&st->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ad7768_interrupt(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct ad7768_state *st = iio_priv(indio_dev);
+
+	if (iio_buffer_enabled(indio_dev))
+		iio_trigger_poll(st->trig);
+	else
+		complete(&st->completion);
+
+	return IRQ_HANDLED;
+};
+
+static int ad7768_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ad7768_state *st = iio_priv(indio_dev);
+
+	iio_triggered_buffer_postenable(indio_dev);
+	/*
+	 * Write a 1 to the LSB of the INTERFACE_FORMAT register to enter
+	 * continuous read mode. Subsequent data reads do not require an
+	 * initial 8-bit write to query the ADC_DATA register.
+	 */
+	return ad7768_spi_reg_write(st, AD7768_REG_INTERFACE_FORMAT, 0x01);
+}
+
+static int ad7768_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct ad7768_state *st = iio_priv(indio_dev);
+	int ret;
+
+	/*
+	 * To exit continuous read mode, perform a single read of the ADC_DATA
+	 * reg (0x2C), which allows further configuration of the device.
+	 */
+	ret = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
+	if (ret < 0)
+		return ret;
+
+	return iio_triggered_buffer_predisable(indio_dev);
+}
+
+static const struct iio_buffer_setup_ops ad7768_buffer_ops = {
+	.postenable = &ad7768_buffer_postenable,
+	.predisable = &ad7768_buffer_predisable,
+};
+
+static const struct iio_trigger_ops ad7768_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+};
+
+static void ad7768_regulator_disable(void *data)
+{
+	struct ad7768_state *st = data;
+
+	regulator_disable(st->vref);
+}
+
+static int ad7768_probe(struct spi_device *spi)
+{
+	struct ad7768_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->spi = spi;
+
+	st->vref = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(st->vref))
+		return PTR_ERR(st->vref);
+
+	ret = regulator_enable(st->vref);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to enable specified vref supply\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&spi->dev, ad7768_regulator_disable, st);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+	mutex_init(&st->lock);
+
+	indio_dev->channels = ad7768_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad7768_channels);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &ad7768_info;
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_TRIGGERED;
+
+	ret = ad7768_setup(st);
+	if (ret < 0) {
+		dev_err(&spi->dev, "AD7768 setup failed\n");
+		return ret;
+	}
+
+	st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
+					  indio_dev->name, indio_dev->id);
+	if (!st->trig)
+		return -ENOMEM;
+
+	st->trig->ops = &ad7768_trigger_ops;
+	st->trig->dev.parent = &spi->dev;
+	iio_trigger_set_drvdata(st->trig, indio_dev);
+	ret = devm_iio_trigger_register(&spi->dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	init_completion(&st->completion);
+
+	ret = devm_request_irq(&spi->dev, spi->irq,
+			       &ad7768_interrupt,
+			       IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			       indio_dev->name, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &ad7768_trigger_handler,
+					      &ad7768_buffer_ops);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ad7768_id_table[] = {
+	{ "ad7768-1", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7768_id_table);
+
+static const struct of_device_id ad7768_of_match[] = {
+	{ .compatible = "adi,ad7768-1" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7768_of_match);
+
+static struct spi_driver ad7768_driver = {
+	.driver = {
+		.name = "ad7768-1",
+		.of_match_table = ad7768_of_match,
+	},
+	.probe = ad7768_probe,
+	.id_table = ad7768_id_table,
+};
+module_spi_driver(ad7768_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7768-1 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 729becb2d3d9..f8600fbcdfe3 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
 
 #define MESON_SAR_ADC_REG0					0x00
 	#define MESON_SAR_ADC_REG0_PANEL_DETECT			BIT(31)
@@ -174,6 +175,9 @@
 #define MESON_SAR_ADC_EFUSE_BYTE3_UPPER_ADC_VAL			GENMASK(6, 0)
 #define MESON_SAR_ADC_EFUSE_BYTE3_IS_CALIBRATED			BIT(7)
 
+#define MESON_HHI_DPLL_TOP_0					0x318
+#define MESON_HHI_DPLL_TOP_0_TSC_BIT4				BIT(9)
+
 /* for use with IIO_VAL_INT_PLUS_MICRO */
 #define MILLION							1000000
 
@@ -280,6 +284,7 @@ struct meson_sar_adc_priv {
 	struct completion			done;
 	int					calibbias;
 	int					calibscale;
+	struct regmap				*tsc_regmap;
 	bool					temperature_sensor_calibrated;
 	u8					temperature_sensor_coefficient;
 	u16					temperature_sensor_adc_val;
@@ -727,6 +732,15 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		return ret;
 	}
 
+	priv->tsc_regmap =
+		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
+						"amlogic,hhi-sysctrl");
+	if (IS_ERR(priv->tsc_regmap)) {
+		dev_err(indio_dev->dev.parent,
+			"failed to get amlogic,hhi-sysctrl regmap\n");
+		return PTR_ERR(priv->tsc_regmap);
+	}
+
 	read_len = MESON_SAR_ADC_EFUSE_BYTES;
 	buf = nvmem_cell_read(temperature_calib, &read_len);
 	if (IS_ERR(buf)) {
@@ -861,6 +875,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 				    priv->temperature_sensor_coefficient);
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
 				   MESON_SAR_ADC_DELTA_10_TS_C_MASK, regval);
+
+		if (priv->param->temperature_trimming_bits == 5) {
+			if (priv->temperature_sensor_coefficient & BIT(4))
+				regval = MESON_HHI_DPLL_TOP_0_TSC_BIT4;
+			else
+				regval = 0;
+
+			/*
+			 * bit [4] (the 5th bit when starting to count at 1)
+			 * of the TSC is located in the HHI register area.
+			 */
+			regmap_update_bits(priv->tsc_regmap,
+					   MESON_HHI_DPLL_TOP_0,
+					   MESON_HHI_DPLL_TOP_0_TSC_BIT4,
+					   regval);
+		}
 	} else {
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
 				   MESON_SAR_ADC_DELTA_10_TS_REVE1, 0);
@@ -1064,6 +1094,9 @@ static const struct meson_sar_adc_param meson_sar_adc_meson8b_param = {
 	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
 	.regmap_config = &meson_sar_adc_regmap_config_meson8,
 	.resolution = 10,
+	.temperature_trimming_bits = 5,
+	.temperature_multiplier = 10,
+	.temperature_divider = 32,
 };
 
 static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
new file mode 100644
index 000000000000..9e25bbec9c70
--- /dev/null
+++ b/drivers/iio/adc/npcm_adc.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Nuvoton Technology corporation.
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+struct npcm_adc {
+	bool int_status;
+	u32 adc_sample_hz;
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *adc_clk;
+	wait_queue_head_t wq;
+	struct regulator *vref;
+	struct regmap *rst_regmap;
+};
+
+/* NPCM7xx reset module */
+#define NPCM7XX_IPSRST1_OFFSET		0x020
+#define NPCM7XX_IPSRST1_ADC_RST		BIT(27)
+
+/* ADC registers */
+#define NPCM_ADCCON	 0x00
+#define NPCM_ADCDATA	 0x04
+
+/* ADCCON Register Bits */
+#define NPCM_ADCCON_ADC_INT_EN		BIT(21)
+#define NPCM_ADCCON_REFSEL		BIT(19)
+#define NPCM_ADCCON_ADC_INT_ST		BIT(18)
+#define NPCM_ADCCON_ADC_EN		BIT(17)
+#define NPCM_ADCCON_ADC_RST		BIT(16)
+#define NPCM_ADCCON_ADC_CONV		BIT(13)
+
+#define NPCM_ADCCON_CH_MASK		GENMASK(27, 24)
+#define NPCM_ADCCON_CH(x)		((x) << 24)
+#define NPCM_ADCCON_DIV_SHIFT		1
+#define NPCM_ADCCON_DIV_MASK		GENMASK(8, 1)
+#define NPCM_ADC_DATA_MASK(x)		((x) & GENMASK(9, 0))
+
+#define NPCM_ADC_ENABLE		(NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
+
+/* ADC General Definition */
+#define NPCM_RESOLUTION_BITS		10
+#define NPCM_INT_VREF_MV		2000
+
+#define NPCM_ADC_CHAN(ch) {					\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = ch,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+}
+
+static const struct iio_chan_spec npcm_adc_iio_channels[] = {
+	NPCM_ADC_CHAN(0),
+	NPCM_ADC_CHAN(1),
+	NPCM_ADC_CHAN(2),
+	NPCM_ADC_CHAN(3),
+	NPCM_ADC_CHAN(4),
+	NPCM_ADC_CHAN(5),
+	NPCM_ADC_CHAN(6),
+	NPCM_ADC_CHAN(7),
+};
+
+static irqreturn_t npcm_adc_isr(int irq, void *data)
+{
+	u32 regtemp;
+	struct iio_dev *indio_dev = data;
+	struct npcm_adc *info = iio_priv(indio_dev);
+
+	regtemp = ioread32(info->regs + NPCM_ADCCON);
+	if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
+		iowrite32(regtemp, info->regs + NPCM_ADCCON);
+		wake_up_interruptible(&info->wq);
+		info->int_status = true;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
+{
+	int ret;
+	u32 regtemp;
+
+	/* Select ADC channel */
+	regtemp = ioread32(info->regs + NPCM_ADCCON);
+	regtemp &= ~NPCM_ADCCON_CH_MASK;
+	info->int_status = false;
+	iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
+		  NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
+
+	ret = wait_event_interruptible_timeout(info->wq, info->int_status,
+					       msecs_to_jiffies(10));
+	if (ret == 0) {
+		regtemp = ioread32(info->regs + NPCM_ADCCON);
+		if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
+			/* if conversion failed - reset ADC module */
+			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
+				     NPCM7XX_IPSRST1_ADC_RST);
+			msleep(100);
+			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
+				     0x0);
+			msleep(100);
+
+			/* Enable ADC and start conversion module */
+			iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
+				  info->regs + NPCM_ADCCON);
+			dev_err(info->dev, "RESET ADC Complete\n");
+		}
+		return -ETIMEDOUT;
+	}
+	if (ret < 0)
+		return ret;
+
+	*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
+
+	return 0;
+}
+
+static int npcm_adc_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	int ret;
+	int vref_uv;
+	struct npcm_adc *info = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+		ret = npcm_adc_read(info, val, chan->channel);
+		mutex_unlock(&indio_dev->mlock);
+		if (ret) {
+			dev_err(info->dev, "NPCM ADC read failed\n");
+			return ret;
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (info->vref) {
+			vref_uv = regulator_get_voltage(info->vref);
+			*val = vref_uv / 1000;
+		} else {
+			*val = NPCM_INT_VREF_MV;
+		}
+		*val2 = NPCM_RESOLUTION_BITS;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = info->adc_sample_hz;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct iio_info npcm_adc_iio_info = {
+	.read_raw = &npcm_adc_read_raw,
+};
+
+static const struct of_device_id npcm_adc_match[] = {
+	{ .compatible = "nuvoton,npcm750-adc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, npcm_adc_match);
+
+static int npcm_adc_probe(struct platform_device *pdev)
+{
+	int ret;
+	int irq;
+	u32 div;
+	u32 reg_con;
+	struct resource *res;
+	struct npcm_adc *info;
+	struct iio_dev *indio_dev;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!indio_dev)
+		return -ENOMEM;
+	info = iio_priv(indio_dev);
+
+	info->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->regs))
+		return PTR_ERR(info->regs);
+
+	info->adc_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(info->adc_clk)) {
+		dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
+		return PTR_ERR(info->adc_clk);
+	}
+
+	/* calculate ADC clock sample rate */
+	reg_con = ioread32(info->regs + NPCM_ADCCON);
+	div = reg_con & NPCM_ADCCON_DIV_MASK;
+	div = div >> NPCM_ADCCON_DIV_SHIFT;
+	info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
+
+	if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
+		info->rst_regmap = syscon_regmap_lookup_by_compatible
+			("nuvoton,npcm750-rst");
+		if (IS_ERR(info->rst_regmap)) {
+			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
+			ret = PTR_ERR(info->rst_regmap);
+			goto err_disable_clk;
+		}
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(dev, "failed getting interrupt resource\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
+			       "NPCM_ADC", indio_dev);
+	if (ret < 0) {
+		dev_err(dev, "failed requesting interrupt\n");
+		goto err_disable_clk;
+	}
+
+	reg_con = ioread32(info->regs + NPCM_ADCCON);
+	info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
+	if (!IS_ERR(info->vref)) {
+		ret = regulator_enable(info->vref);
+		if (ret) {
+			dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
+			goto err_disable_clk;
+		}
+
+		iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
+			  info->regs + NPCM_ADCCON);
+	} else {
+		/*
+		 * Any error which is not ENODEV indicates the regulator
+		 * has been specified and so is a failure case.
+		 */
+		if (PTR_ERR(info->vref) != -ENODEV) {
+			ret = PTR_ERR(info->vref);
+			goto err_disable_clk;
+		}
+
+		/* Use internal reference */
+		iowrite32(reg_con | NPCM_ADCCON_REFSEL,
+			  info->regs + NPCM_ADCCON);
+	}
+
+	init_waitqueue_head(&info->wq);
+
+	reg_con = ioread32(info->regs + NPCM_ADCCON);
+	reg_con |= NPCM_ADC_ENABLE;
+
+	/* Enable the ADC Module */
+	iowrite32(reg_con, info->regs + NPCM_ADCCON);
+
+	/* Start ADC conversion */
+	iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
+
+	platform_set_drvdata(pdev, indio_dev);
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &npcm_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = npcm_adc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register the device.\n");
+		goto err_iio_register;
+	}
+
+	pr_info("NPCM ADC driver probed\n");
+
+	return 0;
+
+err_iio_register:
+	iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
+	if (!IS_ERR(info->vref))
+		regulator_disable(info->vref);
+err_disable_clk:
+	clk_disable_unprepare(info->adc_clk);
+
+	return ret;
+}
+
+static int npcm_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct npcm_adc *info = iio_priv(indio_dev);
+	u32 regtemp;
+
+	iio_device_unregister(indio_dev);
+
+	regtemp = ioread32(info->regs + NPCM_ADCCON);
+	iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
+	if (!IS_ERR(info->vref))
+		regulator_disable(info->vref);
+	clk_disable_unprepare(info->adc_clk);
+
+	return 0;
+}
+
+static struct platform_driver npcm_adc_driver = {
+	.probe		= npcm_adc_probe,
+	.remove		= npcm_adc_remove,
+	.driver		= {
+		.name	= "npcm_adc",
+		.of_match_table = npcm_adc_match,
+	},
+};
+
+module_platform_driver(npcm_adc_driver);
+
+MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
+MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c
new file mode 100644
index 000000000000..c2cf58908fc8
--- /dev/null
+++ b/drivers/iio/adc/ti-ads124s08.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+/* TI ADS124S0X chip family driver
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/sysfs.h>
+
+/* Commands */
+#define ADS124S08_CMD_NOP	0x00
+#define ADS124S08_CMD_WAKEUP	0x02
+#define ADS124S08_CMD_PWRDWN	0x04
+#define ADS124S08_CMD_RESET	0x06
+#define ADS124S08_CMD_START	0x08
+#define ADS124S08_CMD_STOP	0x0a
+#define ADS124S08_CMD_SYOCAL	0x16
+#define ADS124S08_CMD_SYGCAL	0x17
+#define ADS124S08_CMD_SFOCAL	0x19
+#define ADS124S08_CMD_RDATA	0x12
+#define ADS124S08_CMD_RREG	0x20
+#define ADS124S08_CMD_WREG	0x40
+
+/* Registers */
+#define ADS124S08_ID_REG	0x00
+#define ADS124S08_STATUS	0x01
+#define ADS124S08_INPUT_MUX	0x02
+#define ADS124S08_PGA		0x03
+#define ADS124S08_DATA_RATE	0x04
+#define ADS124S08_REF		0x05
+#define ADS124S08_IDACMAG	0x06
+#define ADS124S08_IDACMUX	0x07
+#define ADS124S08_VBIAS		0x08
+#define ADS124S08_SYS		0x09
+#define ADS124S08_OFCAL0	0x0a
+#define ADS124S08_OFCAL1	0x0b
+#define ADS124S08_OFCAL2	0x0c
+#define ADS124S08_FSCAL0	0x0d
+#define ADS124S08_FSCAL1	0x0e
+#define ADS124S08_FSCAL2	0x0f
+#define ADS124S08_GPIODAT	0x10
+#define ADS124S08_GPIOCON	0x11
+
+/* ADS124S0x common channels */
+#define ADS124S08_AIN0		0x00
+#define ADS124S08_AIN1		0x01
+#define ADS124S08_AIN2		0x02
+#define ADS124S08_AIN3		0x03
+#define ADS124S08_AIN4		0x04
+#define ADS124S08_AIN5		0x05
+#define ADS124S08_AINCOM	0x0c
+/* ADS124S08 only channels */
+#define ADS124S08_AIN6		0x06
+#define ADS124S08_AIN7		0x07
+#define ADS124S08_AIN8		0x08
+#define ADS124S08_AIN9		0x09
+#define ADS124S08_AIN10		0x0a
+#define ADS124S08_AIN11		0x0b
+#define ADS124S08_MAX_CHANNELS	12
+
+#define ADS124S08_POS_MUX_SHIFT	0x04
+#define ADS124S08_INT_REF		0x09
+
+#define ADS124S08_START_REG_MASK	0x1f
+#define ADS124S08_NUM_BYTES_MASK	0x1f
+
+#define ADS124S08_START_CONV	0x01
+#define ADS124S08_STOP_CONV	0x00
+
+enum ads124s_id {
+	ADS124S08_ID,
+	ADS124S06_ID,
+};
+
+struct ads124s_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+};
+
+struct ads124s_private {
+	const struct ads124s_chip_info	*chip_info;
+	struct gpio_desc *reset_gpio;
+	struct spi_device *spi;
+	struct mutex lock;
+	u8 data[5] ____cacheline_aligned;
+};
+
+#define ADS124S08_CHAN(index)					\
+{								\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = index,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.scan_index = index,					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = 32,					\
+		.storagebits = 32,				\
+	},							\
+}
+
+static const struct iio_chan_spec ads124s06_channels[] = {
+	ADS124S08_CHAN(0),
+	ADS124S08_CHAN(1),
+	ADS124S08_CHAN(2),
+	ADS124S08_CHAN(3),
+	ADS124S08_CHAN(4),
+	ADS124S08_CHAN(5),
+};
+
+static const struct iio_chan_spec ads124s08_channels[] = {
+	ADS124S08_CHAN(0),
+	ADS124S08_CHAN(1),
+	ADS124S08_CHAN(2),
+	ADS124S08_CHAN(3),
+	ADS124S08_CHAN(4),
+	ADS124S08_CHAN(5),
+	ADS124S08_CHAN(6),
+	ADS124S08_CHAN(7),
+	ADS124S08_CHAN(8),
+	ADS124S08_CHAN(9),
+	ADS124S08_CHAN(10),
+	ADS124S08_CHAN(11),
+};
+
+static const struct ads124s_chip_info ads124s_chip_info_tbl[] = {
+	[ADS124S08_ID] = {
+		.channels = ads124s08_channels,
+		.num_channels = ARRAY_SIZE(ads124s08_channels),
+	},
+	[ADS124S06_ID] = {
+		.channels = ads124s06_channels,
+		.num_channels = ARRAY_SIZE(ads124s06_channels),
+	},
+};
+
+static int ads124s_write_cmd(struct iio_dev *indio_dev, u8 command)
+{
+	struct ads124s_private *priv = iio_priv(indio_dev);
+
+	priv->data[0] = command;
+
+	return spi_write(priv->spi, &priv->data[0], 1);
+}
+
+static int ads124s_write_reg(struct iio_dev *indio_dev, u8 reg, u8 data)
+{
+	struct ads124s_private *priv = iio_priv(indio_dev);
+
+	priv->data[0] = ADS124S08_CMD_WREG | reg;
+	priv->data[1] = 0x0;
+	priv->data[2] = data;
+
+	return spi_write(priv->spi, &priv->data[0], 3);
+}
+
+static int ads124s_reset(struct iio_dev *indio_dev)
+{
+	struct ads124s_private *priv = iio_priv(indio_dev);
+
+	if (priv->reset_gpio) {
+		gpiod_set_value(priv->reset_gpio, 0);
+		udelay(200);
+		gpiod_set_value(priv->reset_gpio, 1);
+	} else {
+		return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET);
+	}
+
+	return 0;
+};
+
+static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan)
+{
+	struct ads124s_private *priv = iio_priv(indio_dev);
+	int ret;
+	u32 tmp;
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &priv->data[0],
+			.len = 4,
+			.cs_change = 1,
+		}, {
+			.tx_buf = &priv->data[1],
+			.rx_buf = &priv->data[1],
+			.len = 4,
+		},
+	};
+
+	priv->data[0] = ADS124S08_CMD_RDATA;
+	memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data));
+
+	ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t));
+	if (ret < 0)
+		return ret;
+
+	tmp = priv->data[2] << 16 | priv->data[3] << 8 | priv->data[4];
+
+	return tmp;
+}
+
+static int ads124s_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long m)
+{
+	struct ads124s_private *priv = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX,
+					chan->channel);
+		if (ret) {
+			dev_err(&priv->spi->dev, "Set ADC CH failed\n");
+			goto out;
+		}
+
+		ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
+		if (ret) {
+			dev_err(&priv->spi->dev, "Start converions failed\n");
+			goto out;
+		}
+
+		ret = ads124s_read(indio_dev, chan->channel);
+		if (ret < 0) {
+			dev_err(&priv->spi->dev, "Read ADC failed\n");
+			goto out;
+		}
+
+		*val = ret;
+
+		ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
+		if (ret) {
+			dev_err(&priv->spi->dev, "Stop converions failed\n");
+			goto out;
+		}
+
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct iio_info ads124s_info = {
+	.read_raw = &ads124s_read_raw,
+};
+
+static irqreturn_t ads124s_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ads124s_private *priv = iio_priv(indio_dev);
+	u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
+	int scan_index, j = 0;
+	int ret;
+
+	for_each_set_bit(scan_index, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX,
+					scan_index);
+		if (ret)
+			dev_err(&priv->spi->dev, "Set ADC CH failed\n");
+
+		ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
+		if (ret)
+			dev_err(&priv->spi->dev, "Start ADC converions failed\n");
+
+		buffer[j] = ads124s_read(indio_dev, scan_index);
+		ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
+		if (ret)
+			dev_err(&priv->spi->dev, "Stop ADC converions failed\n");
+
+		j++;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+			pf->timestamp);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ads124s_probe(struct spi_device *spi)
+{
+	struct ads124s_private *ads124s_priv;
+	struct iio_dev *indio_dev;
+	const struct spi_device_id *spi_id = spi_get_device_id(spi);
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ads124s_priv));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	ads124s_priv = iio_priv(indio_dev);
+
+	ads124s_priv->reset_gpio = devm_gpiod_get_optional(&spi->dev,
+						   "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ads124s_priv->reset_gpio))
+		dev_info(&spi->dev, "Reset GPIO not defined\n");
+
+	ads124s_priv->chip_info = &ads124s_chip_info_tbl[spi_id->driver_data];
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ads124s_priv->spi = spi;
+
+	indio_dev->name = spi_id->name;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads124s_priv->chip_info->channels;
+	indio_dev->num_channels = ads124s_priv->chip_info->num_channels;
+	indio_dev->info = &ads124s_info;
+
+	mutex_init(&ads124s_priv->lock);
+
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
+					      ads124s_trigger_handler, NULL);
+	if (ret) {
+		dev_err(&spi->dev, "iio triggered buffer setup failed\n");
+		return ret;
+	}
+
+	ads124s_reset(indio_dev);
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ads124s_id[] = {
+	{ "ads124s06", ADS124S06_ID },
+	{ "ads124s08", ADS124S08_ID },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ads124s_id);
+
+static const struct of_device_id ads124s_of_table[] = {
+	{ .compatible = "ti,ads124s06" },
+	{ .compatible = "ti,ads124s08" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ads124s_of_table);
+
+static struct spi_driver ads124s_driver = {
+	.driver = {
+		.name	= "ads124s08",
+		.of_match_table = ads124s_of_table,
+	},
+	.probe		= ads124s_probe,
+	.id_table	= ads124s_id,
+};
+module_spi_driver(ads124s_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmuprhy@ti.com>");
+MODULE_DESCRIPTION("TI TI_ADS12S0X ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 3f6be5ac049a..b13c61539d46 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1273,8 +1273,10 @@ static int xadc_probe(struct platform_device *pdev)
 			xadc->threshold[i] = 0xffff;
 		else
 			xadc->threshold[i] = 0;
-		xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
+		ret = xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
 			xadc->threshold[i]);
+		if (ret)
+			goto err_free_irq;
 	}
 
 	/* Go to non-buffered mode */
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index b8e005be4f87..57832b4360e9 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -61,6 +61,17 @@ config IAQCORE
 	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
 	  sensors
 
+config SPS30
+	tristate "SPS30 particulate matter sensor"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build support for the Sensirion SPS30 particulate
+	  matter sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called sps30.
+
 config VZ89X
 	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
 	depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index 2f4c4ba4d781..65bf0f89c0e4 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -9,4 +9,6 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
 obj-$(CONFIG_BME680_SPI) += bme680_spi.o
 obj-$(CONFIG_CCS811)		+= ccs811.o
 obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
+obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
+obj-$(CONFIG_SPS30) += sps30.o
 obj-$(CONFIG_VZ89X)		+= vz89x.o
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
index 06d4be539d2e..b2f805b6b36a 100644
--- a/drivers/iio/chemical/bme680_i2c.c
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -70,10 +70,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
 
+static const struct of_device_id bme680_of_i2c_match[] = {
+	{ .compatible = "bosch,bme680", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);
+
 static struct i2c_driver bme680_i2c_driver = {
 	.driver = {
 		.name			= "bme680_i2c",
 		.acpi_match_table       = ACPI_PTR(bme680_acpi_match),
+		.of_match_table		= bme680_of_i2c_match,
 	},
 	.probe = bme680_i2c_probe,
 	.id_table = bme680_i2c_id,
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
index c9fb05e8d0b9..d0b7bdd3f066 100644
--- a/drivers/iio/chemical/bme680_spi.c
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -6,6 +6,7 @@
  */
 #include <linux/acpi.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 
@@ -110,10 +111,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
 
+static const struct of_device_id bme680_of_spi_match[] = {
+	{ .compatible = "bosch,bme680", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
+
 static struct spi_driver bme680_spi_driver = {
 	.driver = {
 		.name			= "bme680_spi",
 		.acpi_match_table	= ACPI_PTR(bme680_acpi_match),
+		.of_match_table		= bme680_of_spi_match,
 	},
 	.probe = bme680_spi_probe,
 	.id_table = bme680_spi_id,
diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c
new file mode 100644
index 000000000000..8cc8fe5e356d
--- /dev/null
+++ b/drivers/iio/chemical/sgp30.c
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sgp30.c - Support for Sensirion SGP Gas Sensors
+ *
+ * Copyright (C) 2018 Andreas Brauchli <andreas.brauchli@sensirion.com>
+ *
+ * I2C slave address: 0x58
+ *
+ * Datasheets:
+ * https://www.sensirion.com/file/datasheet_sgp30
+ * https://www.sensirion.com/file/datasheet_sgpc3
+ *
+ * TODO:
+ * - baseline support
+ * - humidity compensation
+ * - power mode switching (SGPC3)
+ */
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define SGP_WORD_LEN				2
+#define SGP_CRC8_POLYNOMIAL			0x31
+#define SGP_CRC8_INIT				0xff
+#define SGP_CRC8_LEN				1
+#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
+#define SGP_CMD_DURATION_US			12000
+#define SGP_MEASUREMENT_DURATION_US		50000
+#define SGP_CMD_LEN				SGP_WORD_LEN
+#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN + 2 * SGP_WORD_LEN)
+#define SGP_MEASUREMENT_LEN			2
+#define SGP30_MEASURE_INTERVAL_HZ		1
+#define SGPC3_MEASURE_INTERVAL_HZ		2
+#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) & 0xf000) >> 12)
+#define SGP_VERS_RESERVED(data)	((((data)->feature_set) & 0x0800) >> 11)
+#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
+#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) & 0x0100) >> 8)
+#define SGP_VERS_MAJOR(data)	((((data)->feature_set) & 0x00e0) >> 5)
+#define SGP_VERS_MINOR(data)	(((data)->feature_set) & 0x001f)
+
+DECLARE_CRC8_TABLE(sgp_crc8_table);
+
+enum sgp_product_id {
+	SGP30 = 0,
+	SGPC3,
+};
+
+enum sgp30_channel_idx {
+	SGP30_IAQ_TVOC_IDX = 0,
+	SGP30_IAQ_CO2EQ_IDX,
+	SGP30_SIG_ETOH_IDX,
+	SGP30_SIG_H2_IDX,
+};
+
+enum sgpc3_channel_idx {
+	SGPC3_IAQ_TVOC_IDX = 10,
+	SGPC3_SIG_ETOH_IDX,
+};
+
+enum sgp_cmd {
+	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
+	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
+	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
+	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
+
+	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
+
+	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
+};
+
+struct sgp_version {
+	u8 major;
+	u8 minor;
+};
+
+struct sgp_crc_word {
+	__be16 value;
+	u8 crc8;
+} __attribute__((__packed__));
+
+union sgp_reading {
+	u8 start;
+	struct sgp_crc_word raw_words[4];
+};
+
+enum _iaq_buffer_state {
+	IAQ_BUFFER_EMPTY = 0,
+	IAQ_BUFFER_DEFAULT_VALS,
+	IAQ_BUFFER_VALID,
+};
+
+struct sgp_data {
+	struct i2c_client *client;
+	struct task_struct *iaq_thread;
+	struct mutex data_lock;
+	unsigned long iaq_init_start_jiffies;
+	unsigned long iaq_defval_skip_jiffies;
+	u16 product_id;
+	u16 feature_set;
+	unsigned long measure_interval_jiffies;
+	enum sgp_cmd iaq_init_cmd;
+	enum sgp_cmd measure_iaq_cmd;
+	enum sgp_cmd measure_gas_signals_cmd;
+	union sgp_reading buffer;
+	union sgp_reading iaq_buffer;
+	enum _iaq_buffer_state iaq_buffer_state;
+};
+
+struct sgp_device {
+	const struct iio_chan_spec *channels;
+	int num_channels;
+};
+
+static const struct sgp_version supported_versions_sgp30[] = {
+	{
+		.major = 1,
+		.minor = 0,
+	},
+};
+
+static const struct sgp_version supported_versions_sgpc3[] = {
+	{
+		.major = 0,
+		.minor = 4,
+	},
+};
+
+static const struct iio_chan_spec sgp30_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGP30_IAQ_TVOC_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGP30_IAQ_CO2EQ_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_ETHANOL,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = SGP30_SIG_ETOH_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_H2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = SGP30_SIG_H2_IDX,
+	},
+};
+
+static const struct iio_chan_spec sgpc3_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGPC3_IAQ_TVOC_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_ETHANOL,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = SGPC3_SIG_ETOH_IDX,
+	},
+};
+
+static const struct sgp_device sgp_devices[] = {
+	[SGP30] = {
+		.channels = sgp30_channels,
+		.num_channels = ARRAY_SIZE(sgp30_channels),
+	},
+	[SGPC3] = {
+		.channels = sgpc3_channels,
+		.num_channels = ARRAY_SIZE(sgpc3_channels),
+	},
+};
+
+/**
+ * sgp_verify_buffer() - verify the checksums of the data buffer words
+ *
+ * @data:       SGP data
+ * @buf:        Raw data buffer
+ * @word_count: Num data words stored in the buffer, excluding CRC bytes
+ *
+ * Return:      0 on success, negative error otherwise.
+ */
+static int sgp_verify_buffer(const struct sgp_data *data,
+			     union sgp_reading *buf, size_t word_count)
+{
+	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
+	int i;
+	u8 crc;
+	u8 *data_buf = &buf->start;
+
+	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
+		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
+			   SGP_CRC8_INIT);
+		if (crc != data_buf[i + SGP_WORD_LEN]) {
+			dev_err(&data->client->dev, "CRC error\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * sgp_read_cmd() - reads data from sensor after issuing a command
+ * The caller must hold data->data_lock for the duration of the call.
+ * @data:        SGP data
+ * @cmd:         SGP Command to issue
+ * @buf:         Raw data buffer to use
+ * @word_count:  Num words to read, excluding CRC bytes
+ *
+ * Return:       0 on success, negative error otherwise.
+ */
+static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
+			union sgp_reading *buf, size_t word_count,
+			unsigned long duration_us)
+{
+	int ret;
+	struct i2c_client *client = data->client;
+	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
+	u8 *data_buf;
+
+	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
+	if (ret != SGP_CMD_LEN)
+		return -EIO;
+	usleep_range(duration_us, duration_us + 1000);
+
+	if (word_count == 0)
+		return 0;
+
+	data_buf = &buf->start;
+	ret = i2c_master_recv(client, data_buf, size);
+	if (ret < 0)
+		return ret;
+	if (ret != size)
+		return -EIO;
+
+	return sgp_verify_buffer(data, buf, word_count);
+}
+
+/**
+ * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
+ * The caller must hold data->data_lock for the duration of the call.
+ * @data:       SGP data
+ *
+ * Return:      0 on success, -EBUSY on default values, negative error
+ *              otherwise.
+ */
+
+static int sgp_measure_iaq(struct sgp_data *data)
+{
+	int ret;
+	/* data contains default values */
+	bool default_vals = !time_after(jiffies, data->iaq_init_start_jiffies +
+						 data->iaq_defval_skip_jiffies);
+
+	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data->iaq_buffer,
+			   SGP_MEASUREMENT_LEN, SGP_MEASUREMENT_DURATION_US);
+	if (ret < 0)
+		return ret;
+
+	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
+
+	if (default_vals)
+		return -EBUSY;
+
+	data->iaq_buffer_state = IAQ_BUFFER_VALID;
+
+	return 0;
+}
+
+static void sgp_iaq_thread_sleep_until(const struct sgp_data *data,
+				       unsigned long sleep_jiffies)
+{
+	const long IAQ_POLL = 50000;
+
+	while (!time_after(jiffies, sleep_jiffies)) {
+		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
+		if (kthread_should_stop() || data->iaq_init_start_jiffies == 0)
+			return;
+	}
+}
+
+static int sgp_iaq_threadfn(void *p)
+{
+	struct sgp_data *data = (struct sgp_data *)p;
+	unsigned long next_update_jiffies;
+	int ret;
+
+	while (!kthread_should_stop()) {
+		mutex_lock(&data->data_lock);
+		if (data->iaq_init_start_jiffies == 0) {
+			ret = sgp_read_cmd(data, data->iaq_init_cmd, NULL, 0,
+					   SGP_CMD_DURATION_US);
+			if (ret < 0)
+				goto unlock_sleep_continue;
+			data->iaq_init_start_jiffies = jiffies;
+		}
+
+		ret = sgp_measure_iaq(data);
+		if (ret && ret != -EBUSY) {
+			dev_warn(&data->client->dev,
+				 "IAQ measurement error [%d]\n", ret);
+		}
+unlock_sleep_continue:
+		next_update_jiffies = jiffies + data->measure_interval_jiffies;
+		mutex_unlock(&data->data_lock);
+		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
+	}
+
+	return 0;
+}
+
+static int sgp_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan, int *val,
+			int *val2, long mask)
+{
+	struct sgp_data *data = iio_priv(indio_dev);
+	struct sgp_crc_word *words;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&data->data_lock);
+		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
+			mutex_unlock(&data->data_lock);
+			return -EBUSY;
+		}
+		words = data->iaq_buffer.raw_words;
+		switch (chan->address) {
+		case SGP30_IAQ_TVOC_IDX:
+		case SGPC3_IAQ_TVOC_IDX:
+			*val = 0;
+			*val2 = be16_to_cpu(words[1].value);
+			ret = IIO_VAL_INT_PLUS_NANO;
+			break;
+		case SGP30_IAQ_CO2EQ_IDX:
+			*val = 0;
+			*val2 = be16_to_cpu(words[0].value);
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->data_lock);
+		break;
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->data_lock);
+		if (chan->address == SGPC3_SIG_ETOH_IDX) {
+			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
+				ret = -EBUSY;
+			else
+				ret = 0;
+			words = data->iaq_buffer.raw_words;
+		} else {
+			ret = sgp_read_cmd(data, data->measure_gas_signals_cmd,
+					   &data->buffer, SGP_MEASUREMENT_LEN,
+					   SGP_MEASUREMENT_DURATION_US);
+			words = data->buffer.raw_words;
+		}
+		if (ret) {
+			mutex_unlock(&data->data_lock);
+			return ret;
+		}
+
+		switch (chan->address) {
+		case SGP30_SIG_ETOH_IDX:
+			*val = be16_to_cpu(words[1].value);
+			ret = IIO_VAL_INT;
+			break;
+		case SGPC3_SIG_ETOH_IDX:
+		case SGP30_SIG_H2_IDX:
+			*val = be16_to_cpu(words[0].value);
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->data_lock);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int sgp_check_compat(struct sgp_data *data,
+			    unsigned int product_id)
+{
+	const struct sgp_version *supported_versions;
+	u16 ix, num_fs;
+	u16 product, generation, major, minor;
+
+	/* driver does not match product */
+	generation = SGP_VERS_GEN(data);
+	if (generation != 0) {
+		dev_err(&data->client->dev,
+			"incompatible product generation %d != 0", generation);
+		return -ENODEV;
+	}
+
+	product = SGP_VERS_PRODUCT(data);
+	if (product != product_id) {
+		dev_err(&data->client->dev,
+			"sensor reports a different product: 0x%04hx\n",
+			product);
+		return -ENODEV;
+	}
+
+	if (SGP_VERS_RESERVED(data))
+		dev_warn(&data->client->dev, "reserved bit is set\n");
+
+	/* engineering samples are not supported: no interface guarantees */
+	if (SGP_VERS_ENG_BIT(data))
+		return -ENODEV;
+
+	switch (product) {
+	case SGP30:
+		supported_versions = supported_versions_sgp30;
+		num_fs = ARRAY_SIZE(supported_versions_sgp30);
+		break;
+	case SGPC3:
+		supported_versions = supported_versions_sgpc3;
+		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	major = SGP_VERS_MAJOR(data);
+	minor = SGP_VERS_MINOR(data);
+	for (ix = 0; ix < num_fs; ix++) {
+		if (major == supported_versions[ix].major &&
+		    minor >= supported_versions[ix].minor)
+			return 0;
+	}
+	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
+		major, minor);
+
+	return -ENODEV;
+}
+
+static void sgp_init(struct sgp_data *data)
+{
+	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
+	data->iaq_init_start_jiffies = 0;
+	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
+	switch (SGP_VERS_PRODUCT(data)) {
+	case SGP30:
+		data->measure_interval_jiffies = SGP30_MEASURE_INTERVAL_HZ * HZ;
+		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
+		data->measure_gas_signals_cmd = SGP30_CMD_MEASURE_SIGNAL;
+		data->product_id = SGP30;
+		data->iaq_defval_skip_jiffies = 15 * HZ;
+		break;
+	case SGPC3:
+		data->measure_interval_jiffies = SGPC3_MEASURE_INTERVAL_HZ * HZ;
+		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
+		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
+		data->product_id = SGPC3;
+		data->iaq_defval_skip_jiffies =
+			43 * data->measure_interval_jiffies;
+		break;
+	};
+}
+
+static const struct iio_info sgp_info = {
+	.read_raw	= sgp_read_raw,
+};
+
+static const struct of_device_id sgp_dt_ids[] = {
+	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
+	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
+	{ }
+};
+
+static int sgp_probe(struct i2c_client *client,
+		     const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct sgp_data *data;
+	const struct of_device_id *of_id;
+	unsigned long product_id;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	of_id = of_match_device(sgp_dt_ids, &client->dev);
+	if (of_id)
+		product_id = (unsigned long)of_id->data;
+	else
+		product_id = id->driver_data;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
+	mutex_init(&data->data_lock);
+
+	/* get feature set version and write it to client data */
+	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data->buffer, 1,
+			   SGP_CMD_DURATION_US);
+	if (ret < 0)
+		return ret;
+
+	data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value);
+
+	ret = sgp_check_compat(data, product_id);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &sgp_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = sgp_devices[product_id].channels;
+	indio_dev->num_channels = sgp_devices[product_id].num_channels;
+
+	sgp_init(data);
+
+	ret = devm_iio_device_register(&client->dev, indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "failed to register iio device\n");
+		return ret;
+	}
+
+	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
+				       "%s-iaq", data->client->name);
+
+	return 0;
+}
+
+static int sgp_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct sgp_data *data = iio_priv(indio_dev);
+
+	if (data->iaq_thread)
+		kthread_stop(data->iaq_thread);
+
+	return 0;
+}
+
+static const struct i2c_device_id sgp_id[] = {
+	{ "sgp30", SGP30 },
+	{ "sgpc3", SGPC3 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, sgp_id);
+MODULE_DEVICE_TABLE(of, sgp_dt_ids);
+
+static struct i2c_driver sgp_driver = {
+	.driver = {
+		.name = "sgp30",
+		.of_match_table = of_match_ptr(sgp_dt_ids),
+	},
+	.probe = sgp_probe,
+	.remove = sgp_remove,
+	.id_table = sgp_id,
+};
+module_i2c_driver(sgp_driver);
+
+MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>");
+MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SGP gas sensors");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
new file mode 100644
index 000000000000..e03a28a67146
--- /dev/null
+++ b/drivers/iio/chemical/sps30.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SPS30 particulate matter sensor driver
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
+ *
+ * I2C slave address: 0x69
+ */
+
+#include <asm/unaligned.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define SPS30_CRC8_POLYNOMIAL 0x31
+/* max number of bytes needed to store PM measurements or serial string */
+#define SPS30_MAX_READ_SIZE 48
+/* sensor measures reliably up to 3000 ug / m3 */
+#define SPS30_MAX_PM 3000
+/* minimum and maximum self cleaning periods in seconds */
+#define SPS30_AUTO_CLEANING_PERIOD_MIN 0
+#define SPS30_AUTO_CLEANING_PERIOD_MAX 604800
+
+/* SPS30 commands */
+#define SPS30_START_MEAS 0x0010
+#define SPS30_STOP_MEAS 0x0104
+#define SPS30_RESET 0xd304
+#define SPS30_READ_DATA_READY_FLAG 0x0202
+#define SPS30_READ_DATA 0x0300
+#define SPS30_READ_SERIAL 0xd033
+#define SPS30_START_FAN_CLEANING 0x5607
+#define SPS30_AUTO_CLEANING_PERIOD 0x8004
+/* not a sensor command per se, used only to distinguish write from read */
+#define SPS30_READ_AUTO_CLEANING_PERIOD 0x8005
+
+enum {
+	PM1,
+	PM2P5,
+	PM4,
+	PM10,
+};
+
+enum {
+	RESET,
+	MEASURING,
+};
+
+struct sps30_state {
+	struct i2c_client *client;
+	/*
+	 * Guards against concurrent access to sensor registers.
+	 * Must be held whenever sequence of commands is to be executed.
+	 */
+	struct mutex lock;
+	int state;
+};
+
+DECLARE_CRC8_TABLE(sps30_crc8_table);
+
+static int sps30_write_then_read(struct sps30_state *state, u8 *txbuf,
+				 int txsize, u8 *rxbuf, int rxsize)
+{
+	int ret;
+
+	/*
+	 * Sensor does not support repeated start so instead of
+	 * sending two i2c messages in a row we just send one by one.
+	 */
+	ret = i2c_master_send(state->client, txbuf, txsize);
+	if (ret != txsize)
+		return ret < 0 ? ret : -EIO;
+
+	if (!rxbuf)
+		return 0;
+
+	ret = i2c_master_recv(state->client, rxbuf, rxsize);
+	if (ret != rxsize)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size)
+{
+	/*
+	 * Internally sensor stores measurements in a following manner:
+	 *
+	 * PM1: upper two bytes, crc8, lower two bytes, crc8
+	 * PM2P5: upper two bytes, crc8, lower two bytes, crc8
+	 * PM4: upper two bytes, crc8, lower two bytes, crc8
+	 * PM10: upper two bytes, crc8, lower two bytes, crc8
+	 *
+	 * What follows next are number concentration measurements and
+	 * typical particle size measurement which we omit.
+	 */
+	u8 buf[SPS30_MAX_READ_SIZE] = { cmd >> 8, cmd };
+	int i, ret = 0;
+
+	switch (cmd) {
+	case SPS30_START_MEAS:
+		buf[2] = 0x03;
+		buf[3] = 0x00;
+		buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE);
+		ret = sps30_write_then_read(state, buf, 5, NULL, 0);
+		break;
+	case SPS30_STOP_MEAS:
+	case SPS30_RESET:
+	case SPS30_START_FAN_CLEANING:
+		ret = sps30_write_then_read(state, buf, 2, NULL, 0);
+		break;
+	case SPS30_READ_AUTO_CLEANING_PERIOD:
+		buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8;
+		buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD;
+	case SPS30_READ_DATA_READY_FLAG:
+	case SPS30_READ_DATA:
+	case SPS30_READ_SERIAL:
+		/* every two data bytes are checksummed */
+		size += size / 2;
+		ret = sps30_write_then_read(state, buf, 2, buf, size);
+		break;
+	case SPS30_AUTO_CLEANING_PERIOD:
+		buf[2] = data[0];
+		buf[3] = data[1];
+		buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE);
+		buf[5] = data[2];
+		buf[6] = data[3];
+		buf[7] = crc8(sps30_crc8_table, &buf[5], 2, CRC8_INIT_VALUE);
+		ret = sps30_write_then_read(state, buf, 8, NULL, 0);
+		break;
+	}
+
+	if (ret)
+		return ret;
+
+	/* validate received data and strip off crc bytes */
+	for (i = 0; i < size; i += 3) {
+		u8 crc = crc8(sps30_crc8_table, &buf[i], 2, CRC8_INIT_VALUE);
+
+		if (crc != buf[i + 2]) {
+			dev_err(&state->client->dev,
+				"data integrity check failed\n");
+			return -EIO;
+		}
+
+		*data++ = buf[i];
+		*data++ = buf[i + 1];
+	}
+
+	return 0;
+}
+
+static s32 sps30_float_to_int_clamped(const u8 *fp)
+{
+	int val = get_unaligned_be32(fp);
+	int mantissa = val & GENMASK(22, 0);
+	/* this is fine since passed float is always non-negative */
+	int exp = val >> 23;
+	int fraction, shift;
+
+	/* special case 0 */
+	if (!exp && !mantissa)
+		return 0;
+
+	exp -= 127;
+	if (exp < 0) {
+		/* return values ranging from 1 to 99 */
+		return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp);
+	}
+
+	/* return values ranging from 100 to 300000 */
+	shift = 23 - exp;
+	val = (1 << exp) + (mantissa >> shift);
+	if (val >= SPS30_MAX_PM)
+		return SPS30_MAX_PM * 100;
+
+	fraction = mantissa & GENMASK(shift - 1, 0);
+
+	return val * 100 + ((fraction * 100) >> shift);
+}
+
+static int sps30_do_meas(struct sps30_state *state, s32 *data, int size)
+{
+	int i, ret, tries = 5;
+	u8 tmp[16];
+
+	if (state->state == RESET) {
+		ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0);
+		if (ret)
+			return ret;
+
+		state->state = MEASURING;
+	}
+
+	while (tries--) {
+		ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2);
+		if (ret)
+			return -EIO;
+
+		/* new measurements ready to be read */
+		if (tmp[1] == 1)
+			break;
+
+		msleep_interruptible(300);
+	}
+
+	if (!tries)
+		return -ETIMEDOUT;
+
+	ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < size; i++)
+		data[i] = sps30_float_to_int_clamped(&tmp[4 * i]);
+
+	return 0;
+}
+
+static irqreturn_t sps30_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct sps30_state *state = iio_priv(indio_dev);
+	int ret;
+	s32 data[4 + 2]; /* PM1, PM2P5, PM4, PM10, timestamp */
+
+	mutex_lock(&state->lock);
+	ret = sps30_do_meas(state, data, 4);
+	mutex_unlock(&state->lock);
+	if (ret)
+		goto err;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data,
+					   iio_get_time_ns(indio_dev));
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int sps30_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct sps30_state *state = iio_priv(indio_dev);
+	int data[4], ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_MASSCONCENTRATION:
+			mutex_lock(&state->lock);
+			/* read up to the number of bytes actually needed */
+			switch (chan->channel2) {
+			case IIO_MOD_PM1:
+				ret = sps30_do_meas(state, data, 1);
+				break;
+			case IIO_MOD_PM2P5:
+				ret = sps30_do_meas(state, data, 2);
+				break;
+			case IIO_MOD_PM4:
+				ret = sps30_do_meas(state, data, 3);
+				break;
+			case IIO_MOD_PM10:
+				ret = sps30_do_meas(state, data, 4);
+				break;
+			}
+			mutex_unlock(&state->lock);
+			if (ret)
+				return ret;
+
+			*val = data[chan->address] / 100;
+			*val2 = (data[chan->address] % 100) * 10000;
+
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_MASSCONCENTRATION:
+			switch (chan->channel2) {
+			case IIO_MOD_PM1:
+			case IIO_MOD_PM2P5:
+			case IIO_MOD_PM4:
+			case IIO_MOD_PM10:
+				*val = 0;
+				*val2 = 10000;
+
+				return IIO_VAL_INT_PLUS_MICRO;
+			}
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int sps30_do_cmd_reset(struct sps30_state *state)
+{
+	int ret;
+
+	ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0);
+	msleep(300);
+	/*
+	 * Power-on-reset causes sensor to produce some glitch on i2c bus and
+	 * some controllers end up in error state. Recover simply by placing
+	 * some data on the bus, for example STOP_MEAS command, which
+	 * is NOP in this case.
+	 */
+	sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0);
+	state->state = RESET;
+
+	return ret;
+}
+
+static ssize_t start_cleaning_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct sps30_state *state = iio_priv(indio_dev);
+	int val, ret;
+
+	if (kstrtoint(buf, 0, &val) || val != 1)
+		return -EINVAL;
+
+	mutex_lock(&state->lock);
+	ret = sps30_do_cmd(state, SPS30_START_FAN_CLEANING, NULL, 0);
+	mutex_unlock(&state->lock);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static ssize_t cleaning_period_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct sps30_state *state = iio_priv(indio_dev);
+	u8 tmp[4];
+	int ret;
+
+	mutex_lock(&state->lock);
+	ret = sps30_do_cmd(state, SPS30_READ_AUTO_CLEANING_PERIOD, tmp, 4);
+	mutex_unlock(&state->lock);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", get_unaligned_be32(tmp));
+}
+
+static ssize_t cleaning_period_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct sps30_state *state = iio_priv(indio_dev);
+	int val, ret;
+	u8 tmp[4];
+
+	if (kstrtoint(buf, 0, &val))
+		return -EINVAL;
+
+	if ((val < SPS30_AUTO_CLEANING_PERIOD_MIN) ||
+	    (val > SPS30_AUTO_CLEANING_PERIOD_MAX))
+		return -EINVAL;
+
+	put_unaligned_be32(val, tmp);
+
+	mutex_lock(&state->lock);
+	ret = sps30_do_cmd(state, SPS30_AUTO_CLEANING_PERIOD, tmp, 0);
+	if (ret) {
+		mutex_unlock(&state->lock);
+		return ret;
+	}
+
+	msleep(20);
+
+	/*
+	 * sensor requires reset in order to return up to date self cleaning
+	 * period
+	 */
+	ret = sps30_do_cmd_reset(state);
+	if (ret)
+		dev_warn(dev,
+			 "period changed but reads will return the old value\n");
+
+	mutex_unlock(&state->lock);
+
+	return len;
+}
+
+static ssize_t cleaning_period_available_show(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "[%d %d %d]\n",
+			SPS30_AUTO_CLEANING_PERIOD_MIN, 1,
+			SPS30_AUTO_CLEANING_PERIOD_MAX);
+}
+
+static IIO_DEVICE_ATTR_WO(start_cleaning, 0);
+static IIO_DEVICE_ATTR_RW(cleaning_period, 0);
+static IIO_DEVICE_ATTR_RO(cleaning_period_available, 0);
+
+static struct attribute *sps30_attrs[] = {
+	&iio_dev_attr_start_cleaning.dev_attr.attr,
+	&iio_dev_attr_cleaning_period.dev_attr.attr,
+	&iio_dev_attr_cleaning_period_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sps30_attr_group = {
+	.attrs = sps30_attrs,
+};
+
+static const struct iio_info sps30_info = {
+	.attrs = &sps30_attr_group,
+	.read_raw = sps30_read_raw,
+};
+
+#define SPS30_CHAN(_index, _mod) { \
+	.type = IIO_MASSCONCENTRATION, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.address = _mod, \
+	.scan_index = _index, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 19, \
+		.storagebits = 32, \
+		.endianness = IIO_CPU, \
+	}, \
+}
+
+static const struct iio_chan_spec sps30_channels[] = {
+	SPS30_CHAN(0, PM1),
+	SPS30_CHAN(1, PM2P5),
+	SPS30_CHAN(2, PM4),
+	SPS30_CHAN(3, PM10),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static void sps30_stop_meas(void *data)
+{
+	struct sps30_state *state = data;
+
+	sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0);
+}
+
+static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 };
+
+static int sps30_probe(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev;
+	struct sps30_state *state;
+	u8 buf[32];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	state = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	state->client = client;
+	state->state = RESET;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &sps30_info;
+	indio_dev->name = client->name;
+	indio_dev->channels = sps30_channels;
+	indio_dev->num_channels = ARRAY_SIZE(sps30_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = sps30_scan_masks;
+
+	mutex_init(&state->lock);
+	crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL);
+
+	ret = sps30_do_cmd_reset(state);
+	if (ret) {
+		dev_err(&client->dev, "failed to reset device\n");
+		return ret;
+	}
+
+	ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf));
+	if (ret) {
+		dev_err(&client->dev, "failed to read serial number\n");
+		return ret;
+	}
+	/* returned serial number is already NUL terminated */
+	dev_info(&client->dev, "serial number: %s\n", buf);
+
+	ret = devm_add_action_or_reset(&client->dev, sps30_stop_meas, state);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
+					      sps30_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id sps30_id[] = {
+	{ "sps30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sps30_id);
+
+static const struct of_device_id sps30_of_match[] = {
+	{ .compatible = "sensirion,sps30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sps30_of_match);
+
+static struct i2c_driver sps30_driver = {
+	.driver = {
+		.name = "sps30",
+		.of_match_table = sps30_of_match,
+	},
+	.id_table = sps30_id,
+	.probe_new = sps30_probe,
+};
+module_i2c_driver(sps30_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
+MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 851b61eaf3da..f28daf67db6a 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -148,9 +148,9 @@ config AD5686_SPI
 	depends on SPI
 	select AD5686
 	help
-	  Say yes here to build support for Analog Devices AD5672R, AD5676,
-	  AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R.
-	  Voltage Output Digital to Analog Converter.
+	  Say yes here to build support for Analog Devices AD5672R, AD5674R,
+	  AD5676, AD5676R, AD5679R, AD5684, AD5684R, AD5684R, AD5685R, AD5686,
+	  AD5686R Voltage Output Digital to Analog Converter.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5686.
diff --git a/drivers/iio/dac/ad5686-spi.c b/drivers/iio/dac/ad5686-spi.c
index 665fa6bd9ced..4d857c8da2d2 100644
--- a/drivers/iio/dac/ad5686-spi.c
+++ b/drivers/iio/dac/ad5686-spi.c
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * AD5672R, AD5676, AD5676R, AD5681R, AD5682R, AD5683, AD5683R,
- * AD5684, AD5684R, AD5685R, AD5686, AD5686R
+ * AD5672R, AD5674R, AD5676, AD5676R, AD5679R,
+ * AD5681R, AD5682R, AD5683, AD5683R, AD5684,
+ * AD5684R, AD5685R, AD5686, AD5686R
  * Digital to analog converters driver
  *
  * Copyright 2018 Analog Devices Inc.
@@ -102,8 +103,10 @@ static int ad5686_spi_remove(struct spi_device *spi)
 static const struct spi_device_id ad5686_spi_id[] = {
 	{"ad5310r", ID_AD5310R},
 	{"ad5672r", ID_AD5672R},
+	{"ad5674r", ID_AD5674R},
 	{"ad5676", ID_AD5676},
 	{"ad5676r", ID_AD5676R},
+	{"ad5679r", ID_AD5679R},
 	{"ad5681r", ID_AD5681R},
 	{"ad5682r", ID_AD5682R},
 	{"ad5683", ID_AD5683},
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index a332b93ca2c4..6dd2759b9092 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -71,7 +71,7 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
 	int ret;
 	struct ad5686_state *st = iio_priv(indio_dev);
 	unsigned int val, ref_bit_msk;
-	u8 shift;
+	u8 shift, address = 0;
 
 	ret = strtobool(buf, &readin);
 	if (ret)
@@ -94,6 +94,9 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
 	case AD5686_REGMAP:
 		shift = 0;
 		ref_bit_msk = 0;
+		/* AD5674R/AD5679R have 16 channels and 2 powerdown registers */
+		if (chan->channel > 0x7)
+			address = 0x8;
 		break;
 	case AD5693_REGMAP:
 		shift = 13;
@@ -107,7 +110,8 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
 	if (!st->use_internal_vref)
 		val |= ref_bit_msk;
 
-	ret = st->write(st, AD5686_CMD_POWERDOWN_DAC, 0, val);
+	ret = st->write(st, AD5686_CMD_POWERDOWN_DAC,
+			address, val >> (address * 2));
 
 	return ret ? ret : len;
 }
@@ -226,10 +230,32 @@ static struct iio_chan_spec name[] = {				\
 		AD5868_CHANNEL(7, 7, bits, _shift),		\
 }
 
+#define DECLARE_AD5679_CHANNELS(name, bits, _shift)		\
+static struct iio_chan_spec name[] = {				\
+		AD5868_CHANNEL(0, 0, bits, _shift),		\
+		AD5868_CHANNEL(1, 1, bits, _shift),		\
+		AD5868_CHANNEL(2, 2, bits, _shift),		\
+		AD5868_CHANNEL(3, 3, bits, _shift),		\
+		AD5868_CHANNEL(4, 4, bits, _shift),		\
+		AD5868_CHANNEL(5, 5, bits, _shift),		\
+		AD5868_CHANNEL(6, 6, bits, _shift),		\
+		AD5868_CHANNEL(7, 7, bits, _shift),		\
+		AD5868_CHANNEL(8, 8, bits, _shift),		\
+		AD5868_CHANNEL(9, 9, bits, _shift),		\
+		AD5868_CHANNEL(10, 10, bits, _shift),		\
+		AD5868_CHANNEL(11, 11, bits, _shift),		\
+		AD5868_CHANNEL(12, 12, bits, _shift),		\
+		AD5868_CHANNEL(13, 13, bits, _shift),		\
+		AD5868_CHANNEL(14, 14, bits, _shift),		\
+		AD5868_CHANNEL(15, 15, bits, _shift),		\
+}
+
 DECLARE_AD5693_CHANNELS(ad5310r_channels, 10, 2);
 DECLARE_AD5693_CHANNELS(ad5311r_channels, 10, 6);
 DECLARE_AD5676_CHANNELS(ad5672_channels, 12, 4);
+DECLARE_AD5679_CHANNELS(ad5674r_channels, 12, 4);
 DECLARE_AD5676_CHANNELS(ad5676_channels, 16, 0);
+DECLARE_AD5679_CHANNELS(ad5679r_channels, 16, 0);
 DECLARE_AD5686_CHANNELS(ad5684_channels, 12, 4);
 DECLARE_AD5686_CHANNELS(ad5685r_channels, 14, 2);
 DECLARE_AD5686_CHANNELS(ad5686_channels, 16, 0);
@@ -262,6 +288,12 @@ static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
 		.num_channels = 8,
 		.regmap_type = AD5686_REGMAP,
 	},
+	[ID_AD5674R] = {
+		.channels = ad5674r_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 16,
+		.regmap_type = AD5686_REGMAP,
+	},
 	[ID_AD5675R] = {
 		.channels = ad5676_channels,
 		.int_vref_mv = 2500,
@@ -279,6 +311,12 @@ static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
 		.num_channels = 8,
 		.regmap_type = AD5686_REGMAP,
 	},
+	[ID_AD5679R] = {
+		.channels = ad5679r_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 16,
+		.regmap_type = AD5686_REGMAP,
+	},
 	[ID_AD5681R] = {
 		.channels = ad5691r_channels,
 		.int_vref_mv = 2500,
diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h
index 19f6917d4738..4c3e171ce0cc 100644
--- a/drivers/iio/dac/ad5686.h
+++ b/drivers/iio/dac/ad5686.h
@@ -54,9 +54,11 @@ enum ad5686_supported_device_ids {
 	ID_AD5311R,
 	ID_AD5671R,
 	ID_AD5672R,
+	ID_AD5674R,
 	ID_AD5675R,
 	ID_AD5676,
 	ID_AD5676R,
+	ID_AD5679R,
 	ID_AD5681R,
 	ID_AD5682R,
 	ID_AD5683,
diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
index f3f94fbdd20a..3f9be69499ec 100644
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -943,11 +943,14 @@ static int ad9523_setup(struct iio_dev *indio_dev)
 		}
 	}
 
-	for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN)
-		ad9523_write(indio_dev,
+	for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) {
+		ret = ad9523_write(indio_dev,
 			     AD9523_CHANNEL_CLOCK_DIST(i),
 			     AD9523_CLK_DIST_DRIVER_MODE(TRISTATE) |
 			     AD9523_CLK_DIST_PWR_DOWN_EN);
+		if (ret < 0)
+			return ret;
+	}
 
 	ret = ad9523_write(indio_dev, AD9523_POWER_DOWN_CTRL, 0);
 	if (ret < 0)
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 5483b2ea754d..d2fe9dbddda7 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -13,8 +13,8 @@ config INV_MPU6050_I2C
 	select INV_MPU6050_IIO
 	select REGMAP_I2C
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 and ICM20608
-	  motion tracking devices over I2C.
+	  This driver supports the Invensense MPU6050/6500/9150 and
+	  ICM20608/20602 motion tracking devices over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
 
@@ -24,7 +24,7 @@ config INV_MPU6050_SPI
 	select INV_MPU6050_IIO
 	select REGMAP_SPI
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 and ICM20608
-	  motion tracking devices over SPI.
+	  This driver supports the Invensense MPU6050/6500/9150 and
+	  ICM20608/20602 motion tracking devices over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 1e428c196a82..650de0fefb7b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -38,6 +38,29 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
  */
 static const int accel_scale[] = {598, 1196, 2392, 4785};
 
+static const struct inv_mpu6050_reg_map reg_set_icm20602 = {
+	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
+	.lpf                    = INV_MPU6050_REG_CONFIG,
+	.accel_lpf              = INV_MPU6500_REG_ACCEL_CONFIG_2,
+	.user_ctrl              = INV_MPU6050_REG_USER_CTRL,
+	.fifo_en                = INV_MPU6050_REG_FIFO_EN,
+	.gyro_config            = INV_MPU6050_REG_GYRO_CONFIG,
+	.accl_config            = INV_MPU6050_REG_ACCEL_CONFIG,
+	.fifo_count_h           = INV_MPU6050_REG_FIFO_COUNT_H,
+	.fifo_r_w               = INV_MPU6050_REG_FIFO_R_W,
+	.raw_gyro               = INV_MPU6050_REG_RAW_GYRO,
+	.raw_accl               = INV_MPU6050_REG_RAW_ACCEL,
+	.temperature            = INV_MPU6050_REG_TEMPERATURE,
+	.int_enable             = INV_MPU6050_REG_INT_ENABLE,
+	.int_status             = INV_MPU6050_REG_INT_STATUS,
+	.pwr_mgmt_1             = INV_MPU6050_REG_PWR_MGMT_1,
+	.pwr_mgmt_2             = INV_MPU6050_REG_PWR_MGMT_2,
+	.int_pin_cfg            = INV_MPU6050_REG_INT_PIN_CFG,
+	.accl_offset            = INV_MPU6500_REG_ACCEL_OFFSET,
+	.gyro_offset            = INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = INV_ICM20602_REG_I2C_IF,
+};
+
 static const struct inv_mpu6050_reg_map reg_set_6500 = {
 	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
 	.lpf                    = INV_MPU6050_REG_CONFIG,
@@ -58,6 +81,7 @@ static const struct inv_mpu6050_reg_map reg_set_6500 = {
 	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
 	.accl_offset		= INV_MPU6500_REG_ACCEL_OFFSET,
 	.gyro_offset		= INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = 0,
 };
 
 static const struct inv_mpu6050_reg_map reg_set_6050 = {
@@ -78,6 +102,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = {
 	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
 	.accl_offset		= INV_MPU6050_REG_ACCEL_OFFSET,
 	.gyro_offset		= INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = 0,
 };
 
 static const struct inv_mpu6050_chip_config chip_config_6050 = {
@@ -140,6 +165,12 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 	},
+	{
+		.whoami = INV_ICM20602_WHOAMI_VALUE,
+		.name = "ICM20602",
+		.reg = &reg_set_icm20602,
+		.config = &chip_config_6050,
+	},
 };
 
 int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index dd758e3d403d..e46eb4ddea21 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -127,6 +127,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 	st = iio_priv(dev_get_drvdata(&client->dev));
 	switch (st->chip_type) {
 	case INV_ICM20608:
+	case INV_ICM20602:
 		/* no i2c auxiliary bus on the chip */
 		break;
 	default:
@@ -179,6 +180,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20602", INV_ICM20602},
 	{}
 };
 
@@ -213,6 +215,10 @@ static const struct of_device_id inv_of_match[] = {
 		.compatible = "invensense,icm20608",
 		.data = (void *)INV_ICM20608
 	},
+	{
+		.compatible = "invensense,icm20602",
+		.data = (void *)INV_ICM20602
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, inv_of_match);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 6bcc11fc1b88..325afd9f5f61 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -44,6 +44,7 @@
  *  @int_pin_cfg;	Controls interrupt pin configuration.
  *  @accl_offset:	Controls the accelerometer calibration offset.
  *  @gyro_offset:	Controls the gyroscope calibration offset.
+ *  @i2c_if:		Controls the i2c interface
  */
 struct inv_mpu6050_reg_map {
 	u8 sample_rate_div;
@@ -65,6 +66,7 @@ struct inv_mpu6050_reg_map {
 	u8 int_pin_cfg;
 	u8 accl_offset;
 	u8 gyro_offset;
+	u8 i2c_if;
 };
 
 /*device enum */
@@ -77,6 +79,7 @@ enum inv_devices {
 	INV_MPU9250,
 	INV_MPU9255,
 	INV_ICM20608,
+	INV_ICM20602,
 	INV_NUM_PARTS
 };
 
@@ -195,6 +198,10 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_BIT_PWR_ACCL_STBY       0x38
 #define INV_MPU6050_BIT_PWR_GYRO_STBY       0x07
 
+/* ICM20602 register */
+#define INV_ICM20602_REG_I2C_IF             0x70
+#define INV_ICM20602_BIT_I2C_IF_DIS         0x40
+
 #define INV_MPU6050_REG_FIFO_COUNT_H        0x72
 #define INV_MPU6050_REG_FIFO_R_W            0x74
 
@@ -261,6 +268,7 @@ struct inv_mpu6050_state {
 #define INV_MPU9255_WHOAMI_VALUE		0x73
 #define INV_MPU6515_WHOAMI_VALUE		0x74
 #define INV_ICM20608_WHOAMI_VALUE		0xAF
+#define INV_ICM20602_WHOAMI_VALUE		0x12
 
 /* scan element definition */
 enum inv_mpu6050_scan {
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 227f50afff22..a112c3f45f74 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -31,9 +31,14 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
-	ret = regmap_write(st->map, st->reg->user_ctrl,
-			   st->chip_config.user_ctrl);
+	if (st->reg->i2c_if) {
+		ret = regmap_write(st->map, st->reg->i2c_if,
+				   INV_ICM20602_BIT_I2C_IF_DIS);
+	} else {
+		st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
+		ret = regmap_write(st->map, st->reg->user_ctrl,
+				   st->chip_config.user_ctrl);
+	}
 	if (ret) {
 		inv_mpu6050_set_power_itg(st, false);
 		return ret;
@@ -81,6 +86,7 @@ static const struct spi_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20602", INV_ICM20602},
 	{}
 };
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 8e47dccdd40f..66fbcd94642d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -105,12 +105,10 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
 static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr,
 				    u8 *data, int len)
 {
-	const struct st_lsm6dsx_shub_settings *hub_settings;
 	int err;
 
 	mutex_lock(&hw->page_lock);
 
-	hub_settings = &hw->settings->shub_settings;
 	err = st_lsm6dsx_set_page(hw, true);
 	if (err < 0)
 		goto out;
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 4f5cd9f60870..4700fd5d8c90 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -87,6 +87,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_GRAVITY]  = "gravity",
 	[IIO_POSITIONRELATIVE]  = "positionrelative",
 	[IIO_PHASE] = "phase",
+	[IIO_MASSCONCENTRATION] = "massconcentration",
 };
 
 static const char * const iio_modifier_names[] = {
@@ -127,6 +128,10 @@ static const char * const iio_modifier_names[] = {
 	[IIO_MOD_Q] = "q",
 	[IIO_MOD_CO2] = "co2",
 	[IIO_MOD_VOC] = "voc",
+	[IIO_MOD_PM1] = "pm1",
+	[IIO_MOD_PM2P5] = "pm2p5",
+	[IIO_MOD_PM4] = "pm4",
+	[IIO_MOD_PM10] = "pm10",
 };
 
 /* relies on pairs of these shared then separate */
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 36f458433480..5190eacfeb0a 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -299,6 +299,16 @@ config MAX44000
 	 To compile this driver as a module, choose M here:
 	 the module will be called max44000.
 
+config MAX44009
+	tristate "MAX44009 Ambient Light Sensor"
+	depends on I2C
+	help
+	 Say Y here if you want to build support for Maxim Integrated's
+	 MAX44009 ambient light sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called max44009.
+
 config OPT3001
 	tristate "Texas Instruments OPT3001 Light Sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 286bf3975372..e40794fbb435 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_LV0104CS)		+= lv0104cs.o
 obj-$(CONFIG_MAX44000)		+= max44000.o
+obj-$(CONFIG_MAX44009)		+= max44009.o
 obj-$(CONFIG_OPT3001)		+= opt3001.o
 obj-$(CONFIG_PA12203001)	+= pa12203001.o
 obj-$(CONFIG_RPR0521)		+= rpr0521.o
diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index b45400f8fef4..846df4dce48c 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -23,6 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -95,6 +96,7 @@ struct isl29018_chip {
 	struct isl29018_scale	scale;
 	int			prox_scheme;
 	bool			suspended;
+	struct regulator	*vcc_reg;
 };
 
 static int isl29018_set_integration_time(struct isl29018_chip *chip,
@@ -708,6 +710,16 @@ static const char *isl29018_match_acpi_device(struct device *dev, int *data)
 	return dev_name(dev);
 }
 
+static void isl29018_disable_regulator_action(void *_data)
+{
+	struct isl29018_chip *chip = _data;
+	int err;
+
+	err = regulator_disable(chip->vcc_reg);
+	if (err)
+		pr_err("failed to disable isl29018's VCC regulator!\n");
+}
+
 static int isl29018_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
@@ -742,6 +754,27 @@ static int isl29018_probe(struct i2c_client *client,
 	chip->scale = isl29018_scales[chip->int_time][0];
 	chip->suspended = false;
 
+	chip->vcc_reg = devm_regulator_get(&client->dev, "vcc");
+	if (IS_ERR(chip->vcc_reg)) {
+		err = PTR_ERR(chip->vcc_reg);
+		if (err != -EPROBE_DEFER)
+			dev_err(&client->dev, "failed to get VCC regulator!\n");
+		return err;
+	}
+
+	err = regulator_enable(chip->vcc_reg);
+	if (err) {
+		dev_err(&client->dev, "failed to enable VCC regulator!\n");
+		return err;
+	}
+
+	err = devm_add_action_or_reset(&client->dev, isl29018_disable_regulator_action,
+				 chip);
+	if (err) {
+		dev_err(&client->dev, "failed to setup regulator cleanup action!\n");
+		return err;
+	}
+
 	chip->regmap = devm_regmap_init_i2c(client,
 				isl29018_chip_info_tbl[dev_id].regmap_cfg);
 	if (IS_ERR(chip->regmap)) {
@@ -768,6 +801,7 @@ static int isl29018_probe(struct i2c_client *client,
 static int isl29018_suspend(struct device *dev)
 {
 	struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int ret;
 
 	mutex_lock(&chip->lock);
 
@@ -777,10 +811,13 @@ static int isl29018_suspend(struct device *dev)
 	 * So we do not have much to do here.
 	 */
 	chip->suspended = true;
+	ret = regulator_disable(chip->vcc_reg);
+	if (ret)
+		dev_err(dev, "failed to disable VCC regulator\n");
 
 	mutex_unlock(&chip->lock);
 
-	return 0;
+	return ret;
 }
 
 static int isl29018_resume(struct device *dev)
@@ -790,6 +827,13 @@ static int isl29018_resume(struct device *dev)
 
 	mutex_lock(&chip->lock);
 
+	err = regulator_enable(chip->vcc_reg);
+	if (err) {
+		dev_err(dev, "failed to enable VCC regulator\n");
+		mutex_unlock(&chip->lock);
+		return err;
+	}
+
 	err = isl29018_chip_init(chip);
 	if (!err)
 		chip->suspended = false;
diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c
new file mode 100644
index 000000000000..00ba15499638
--- /dev/null
+++ b/drivers/iio/light/max44009.c
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * max44009.c - Support for MAX44009 Ambient Light Sensor
+ *
+ * Copyright (c) 2019 Robert Eshleman <bobbyeshleman@gmail.com>
+ *
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf
+ *
+ * TODO: Support continuous mode and configuring from manual mode to
+ *	 automatic mode.
+ *
+ * Default I2C address: 0x4a
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/util_macros.h>
+
+#define MAX44009_DRV_NAME "max44009"
+
+/* Registers in datasheet order */
+#define MAX44009_REG_INT_STATUS 0x0
+#define MAX44009_REG_INT_EN 0x1
+#define MAX44009_REG_CFG 0x2
+#define MAX44009_REG_LUX_HI 0x3
+#define MAX44009_REG_LUX_LO 0x4
+#define MAX44009_REG_UPPER_THR 0x5
+#define MAX44009_REG_LOWER_THR 0x6
+#define MAX44009_REG_THR_TIMER 0x7
+
+#define MAX44009_CFG_TIM_MASK GENMASK(2, 0)
+#define MAX44009_CFG_MAN_MODE_MASK BIT(6)
+
+/* The maximum rising threshold for the max44009 */
+#define MAX44009_MAXIMUM_THRESHOLD 7520256
+
+#define MAX44009_THRESH_EXP_MASK (0xf << 4)
+#define MAX44009_THRESH_EXP_RSHIFT 4
+#define MAX44009_THRESH_MANT_LSHIFT 4
+#define MAX44009_THRESH_MANT_MASK 0xf
+
+#define MAX44009_UPPER_THR_MINIMUM 15
+
+/* The max44009 always scales raw readings by 0.045 and is non-configurable */
+#define MAX44009_SCALE_NUMERATOR 45
+#define MAX44009_SCALE_DENOMINATOR 1000
+
+/* The fixed-point fractional multiplier for de-scaling threshold values */
+#define MAX44009_FRACT_MULT 1000000
+
+static const u32 max44009_int_time_ns_array[] = {
+	800000000,
+	400000000,
+	200000000,
+	100000000,
+	50000000, /* Manual mode only */
+	25000000, /* Manual mode only */
+	12500000, /* Manual mode only */
+	6250000,  /* Manual mode only */
+};
+
+static const char max44009_int_time_str[] =
+	"0.8 "
+	"0.4 "
+	"0.2 "
+	"0.1 "
+	"0.05 "
+	"0.025 "
+	"0.0125 "
+	"0.00625";
+
+struct max44009_data {
+	struct i2c_client *client;
+	struct mutex lock;
+};
+
+static const struct iio_event_spec max44009_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec max44009_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_INT_TIME),
+		.event_spec = max44009_event_spec,
+		.num_event_specs = ARRAY_SIZE(max44009_event_spec),
+	},
+};
+
+static int max44009_read_int_time(struct max44009_data *data)
+{
+
+	int ret = i2c_smbus_read_byte_data(data->client, MAX44009_REG_CFG);
+
+	if (ret < 0)
+		return ret;
+
+	return max44009_int_time_ns_array[ret & MAX44009_CFG_TIM_MASK];
+}
+
+static int max44009_write_int_time(struct max44009_data *data,
+				   int val, int val2)
+{
+	struct i2c_client *client = data->client;
+	int ret, int_time, config;
+	s64 ns;
+
+	ns = val * NSEC_PER_SEC + val2;
+	int_time = find_closest_descending(
+			ns,
+			max44009_int_time_ns_array,
+			ARRAY_SIZE(max44009_int_time_ns_array));
+
+	ret = i2c_smbus_read_byte_data(client, MAX44009_REG_CFG);
+	if (ret < 0)
+		return ret;
+
+	config = ret;
+	config &= int_time;
+
+	/*
+	 * To set the integration time, the device must also be in manual
+	 * mode.
+	 */
+	config |= MAX44009_CFG_MAN_MODE_MASK;
+
+	return i2c_smbus_write_byte_data(client, MAX44009_REG_CFG, config);
+}
+
+static int max44009_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan, int val,
+			      int val2, long mask)
+{
+	struct max44009_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) {
+		mutex_lock(&data->lock);
+		ret = max44009_write_int_time(data, val, val2);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+	return -EINVAL;
+}
+
+static int max44009_write_raw_get_fmt(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan,
+				      long mask)
+{
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int max44009_lux_raw(u8 hi, u8 lo)
+{
+	int mantissa;
+	int exponent;
+
+	/*
+	 * The mantissa consists of the low nibble of the Lux High Byte
+	 * and the low nibble of the Lux Low Byte.
+	 */
+	mantissa = ((hi & 0xf) << 4) | (lo & 0xf);
+
+	/* The exponent byte is just the upper nibble of the Lux High Byte */
+	exponent = (hi >> 4) & 0xf;
+
+	/*
+	 * The exponent value is base 2 to the power of the raw exponent byte.
+	 */
+	exponent = 1 << exponent;
+
+	return exponent * mantissa;
+}
+
+#define MAX44009_READ_LUX_XFER_LEN (4)
+
+static int max44009_read_lux_raw(struct max44009_data *data)
+{
+	int ret;
+	u8 hireg = MAX44009_REG_LUX_HI;
+	u8 loreg = MAX44009_REG_LUX_LO;
+	u8 lo = 0;
+	u8 hi = 0;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = data->client->addr,
+			.flags = 0,
+			.len = sizeof(hireg),
+			.buf = &hireg,
+		},
+		{
+			.addr = data->client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(hi),
+			.buf = &hi,
+		},
+		{
+			.addr = data->client->addr,
+			.flags = 0,
+			.len = sizeof(loreg),
+			.buf = &loreg,
+		},
+		{
+			.addr = data->client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(lo),
+			.buf = &lo,
+		}
+	};
+
+	/*
+	 * Use i2c_transfer instead of smbus read because i2c_transfer
+	 * does NOT use a stop bit between address write and data read.
+	 * Using a stop bit causes disjoint upper/lower byte reads and
+	 * reduces accuracy.
+	 */
+	ret = i2c_transfer(data->client->adapter,
+			   msgs, MAX44009_READ_LUX_XFER_LEN);
+
+	if (ret != MAX44009_READ_LUX_XFER_LEN)
+		return -EIO;
+
+	return max44009_lux_raw(hi, lo);
+}
+
+static int max44009_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	struct max44009_data *data = iio_priv(indio_dev);
+	int lux_raw;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = max44009_read_lux_raw(data);
+			if (ret < 0)
+				return ret;
+			lux_raw = ret;
+
+			*val = lux_raw * MAX44009_SCALE_NUMERATOR;
+			*val2 = MAX44009_SCALE_DENOMINATOR;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_INT_TIME:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = max44009_read_int_time(data);
+			if (ret < 0)
+				return ret;
+
+			*val2 = ret;
+			*val = 0;
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR(illuminance_integration_time_available,
+		      max44009_int_time_str);
+
+static struct attribute *max44009_attributes[] = {
+	&iio_const_attr_illuminance_integration_time_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group max44009_attribute_group = {
+	.attrs = max44009_attributes,
+};
+
+static int max44009_threshold_byte_from_fraction(int integral, int fractional)
+{
+	int mantissa, exp;
+
+	if ((integral <= 0 && fractional <= 0) ||
+	     integral > MAX44009_MAXIMUM_THRESHOLD ||
+	     (integral == MAX44009_MAXIMUM_THRESHOLD && fractional != 0))
+		return -EINVAL;
+
+	/* Reverse scaling of fixed-point integral */
+	mantissa = integral * MAX44009_SCALE_DENOMINATOR;
+	mantissa /= MAX44009_SCALE_NUMERATOR;
+
+	/* Reverse scaling of fixed-point fractional */
+	mantissa += fractional / MAX44009_FRACT_MULT *
+		    (MAX44009_SCALE_DENOMINATOR / MAX44009_SCALE_NUMERATOR);
+
+	for (exp = 0; mantissa > 0xff; exp++)
+		mantissa >>= 1;
+
+	mantissa >>= 4;
+	mantissa &= 0xf;
+	exp <<= 4;
+
+	return exp | mantissa;
+}
+
+static int max44009_get_thr_reg(enum iio_event_direction dir)
+{
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		return MAX44009_REG_UPPER_THR;
+	case IIO_EV_DIR_FALLING:
+		return MAX44009_REG_LOWER_THR;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int max44009_write_event_value(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
+				      enum iio_event_info info,
+				      int val, int val2)
+{
+	struct max44009_data *data = iio_priv(indio_dev);
+	int reg, threshold;
+
+	if (info != IIO_EV_INFO_VALUE || chan->type != IIO_LIGHT)
+		return -EINVAL;
+
+	threshold = max44009_threshold_byte_from_fraction(val, val2);
+	if (threshold < 0)
+		return threshold;
+
+	reg = max44009_get_thr_reg(dir);
+	if (reg < 0)
+		return reg;
+
+	return i2c_smbus_write_byte_data(data->client, reg, threshold);
+}
+
+static int max44009_read_threshold(struct iio_dev *indio_dev,
+				   enum iio_event_direction dir)
+{
+	struct max44009_data *data = iio_priv(indio_dev);
+	int byte, reg;
+	int mantissa, exponent;
+
+	reg = max44009_get_thr_reg(dir);
+	if (reg < 0)
+		return reg;
+
+	byte = i2c_smbus_read_byte_data(data->client, reg);
+	if (byte < 0)
+		return byte;
+
+	mantissa = byte & MAX44009_THRESH_MANT_MASK;
+	mantissa <<= MAX44009_THRESH_MANT_LSHIFT;
+
+	/*
+	 * To get the upper threshold, always adds the minimum upper threshold
+	 * value to the shifted byte value (see datasheet).
+	 */
+	if (dir == IIO_EV_DIR_RISING)
+		mantissa += MAX44009_UPPER_THR_MINIMUM;
+
+	/*
+	 * Exponent is base 2 to the power of the threshold exponent byte
+	 * value
+	 */
+	exponent = byte & MAX44009_THRESH_EXP_MASK;
+	exponent >>= MAX44009_THRESH_EXP_RSHIFT;
+
+	return (1 << exponent) * mantissa;
+}
+
+static int max44009_read_event_value(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     enum iio_event_info info,
+				     int *val, int *val2)
+{
+	int ret;
+	int threshold;
+
+	if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	ret = max44009_read_threshold(indio_dev, dir);
+	if (ret < 0)
+		return ret;
+	threshold = ret;
+
+	*val = threshold * MAX44009_SCALE_NUMERATOR;
+	*val2 = MAX44009_SCALE_DENOMINATOR;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int max44009_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       int state)
+{
+	struct max44009_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					MAX44009_REG_INT_EN, state);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Set device to trigger interrupt immediately upon exceeding
+	 * the threshold limit.
+	 */
+	return i2c_smbus_write_byte_data(data->client,
+					 MAX44009_REG_THR_TIMER, 0);
+}
+
+static int max44009_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	struct max44009_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	return i2c_smbus_read_byte_data(data->client, MAX44009_REG_INT_EN);
+}
+
+static const struct iio_info max44009_info = {
+	.read_raw = max44009_read_raw,
+	.write_raw = max44009_write_raw,
+	.write_raw_get_fmt = max44009_write_raw_get_fmt,
+	.read_event_value = max44009_read_event_value,
+	.read_event_config = max44009_read_event_config,
+	.write_event_value = max44009_write_event_value,
+	.write_event_config = max44009_write_event_config,
+	.attrs = &max44009_attribute_group,
+};
+
+static irqreturn_t max44009_threaded_irq_handler(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct max44009_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, MAX44009_REG_INT_STATUS);
+	if (ret) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_EITHER),
+			       iio_get_time_ns(indio_dev));
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int max44009_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct max44009_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &max44009_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = MAX44009_DRV_NAME;
+	indio_dev->channels = max44009_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max44009_channels);
+	mutex_init(&data->lock);
+
+	/* Clear any stale interrupt bit */
+	ret = i2c_smbus_read_byte_data(client, MAX44009_REG_CFG);
+	if (ret < 0)
+		return ret;
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL,
+						max44009_threaded_irq_handler,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT | IRQF_SHARED,
+						"max44009_event",
+						indio_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id max44009_id[] = {
+	{ "max44009", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max44009_id);
+
+static struct i2c_driver max44009_driver = {
+	.driver = {
+		.name = MAX44009_DRV_NAME,
+	},
+	.probe = max44009_probe,
+	.id_table = max44009_id,
+};
+module_i2c_driver(max44009_driver);
+
+static const struct of_device_id max44009_of_match[] = {
+	{ .compatible = "maxim,max44009" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max44009_of_match);
+
+MODULE_AUTHOR("Robert Eshleman <bobbyeshleman@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX44009 ambient light sensor driver");
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index f063355480ba..dd990cdb04a8 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -20,6 +20,7 @@
 #include <linux/iio/buffer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/delay.h>
+#include <linux/regulator/consumer.h>
 
 #define MAG3110_STATUS 0x00
 #define MAG3110_OUT_X 0x01 /* MSB first */
@@ -56,6 +57,8 @@ struct mag3110_data {
 	struct mutex lock;
 	u8 ctrl_reg1;
 	int sleep_val;
+	struct regulator *vdd_reg;
+	struct regulator *vddio_reg;
 };
 
 static int mag3110_request(struct mag3110_data *data)
@@ -469,17 +472,50 @@ static int mag3110_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
-	if (ret < 0)
-		return ret;
-	if (ret != MAG3110_DEVICE_ID)
-		return -ENODEV;
-
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
+
+	data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(data->vdd_reg)) {
+		if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(&client->dev, "failed to get VDD regulator!\n");
+		return PTR_ERR(data->vdd_reg);
+	}
+
+	data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
+	if (IS_ERR(data->vddio_reg)) {
+		if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(&client->dev, "failed to get VDDIO regulator!\n");
+		return PTR_ERR(data->vddio_reg);
+	}
+
+	ret = regulator_enable(data->vdd_reg);
+	if (ret) {
+		dev_err(&client->dev, "failed to enable VDD regulator!\n");
+		return ret;
+	}
+
+	ret = regulator_enable(data->vddio_reg);
+	if (ret) {
+		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+		goto disable_regulator_vdd;
+	}
+
+	ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
+	if (ret < 0)
+		goto disable_regulators;
+	if (ret != MAG3110_DEVICE_ID) {
+		ret = -ENODEV;
+		goto disable_regulators;
+	}
+
 	data->client = client;
 	mutex_init(&data->lock);
 
@@ -499,7 +535,7 @@ static int mag3110_probe(struct i2c_client *client,
 
 	ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1);
 	if (ret < 0)
-		return ret;
+		goto disable_regulators;
 
 	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
 		MAG3110_CTRL_AUTO_MRST_EN);
@@ -520,16 +556,24 @@ buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
 standby_on_error:
 	mag3110_standby(iio_priv(indio_dev));
+disable_regulators:
+	regulator_disable(data->vddio_reg);
+disable_regulator_vdd:
+	regulator_disable(data->vdd_reg);
+
 	return ret;
 }
 
 static int mag3110_remove(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mag3110_data *data = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
 	mag3110_standby(iio_priv(indio_dev));
+	regulator_disable(data->vddio_reg);
+	regulator_disable(data->vdd_reg);
 
 	return 0;
 }
@@ -537,14 +581,48 @@ static int mag3110_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int mag3110_suspend(struct device *dev)
 {
-	return mag3110_standby(iio_priv(i2c_get_clientdata(
+	struct mag3110_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	int ret;
+
+	ret = mag3110_standby(iio_priv(i2c_get_clientdata(
 		to_i2c_client(dev))));
+	if (ret)
+		return ret;
+
+	ret = regulator_disable(data->vddio_reg);
+	if (ret) {
+		dev_err(dev, "failed to disable VDDIO regulator\n");
+		return ret;
+	}
+
+	ret = regulator_disable(data->vdd_reg);
+	if (ret) {
+		dev_err(dev, "failed to disable VDD regulator\n");
+		return ret;
+	}
+
+	return 0;
 }
 
 static int mag3110_resume(struct device *dev)
 {
 	struct mag3110_data *data = iio_priv(i2c_get_clientdata(
 		to_i2c_client(dev)));
+	int ret;
+
+	ret = regulator_enable(data->vdd_reg);
+	if (ret) {
+		dev_err(dev, "failed to enable VDD regulator\n");
+		return ret;
+	}
+
+	ret = regulator_enable(data->vddio_reg);
+	if (ret) {
+		dev_err(dev, "failed to enable VDDIO regulator\n");
+		regulator_disable(data->vdd_reg);
+		return ret;
+	}
 
 	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
 		data->ctrl_reg1);
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index eaa7cfcb4c2a..efeb89f3df71 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -165,7 +165,7 @@ config IIO_ST_PRESS
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics pressure
-	  sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB.
+	  sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index e67eb0d971bf..57946605f3ba 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -21,6 +21,7 @@ enum st_press_type {
 	LPS22HB,
 	LPS33HW,
 	LPS35HW,
+	LPS22HH,
 	ST_PRESS_MAX,
 };
 
@@ -30,6 +31,7 @@ enum st_press_type {
 #define LPS22HB_PRESS_DEV_NAME		"lps22hb"
 #define LPS33HW_PRESS_DEV_NAME		"lps33hw"
 #define LPS35HW_PRESS_DEV_NAME		"lps35hw"
+#define LPS22HH_PRESS_DEV_NAME		"lps22hh"
 
 /**
  * struct st_sensors_platform_data - default press platform data
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 4ddb6cf7d401..38dcdb7c000e 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -492,6 +492,75 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
+	{
+		/*
+		 * CUSTOM VALUES FOR LPS22HH SENSOR
+		 * See LPS22HH datasheet:
+		 * http://www2.st.com/resource/en/datasheet/lps22hh.pdf
+		 */
+		.wai = 0xb3,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LPS22HH_PRESS_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
+		.num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
+		.odr = {
+			.addr = 0x10,
+			.mask = 0x70,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 10, .value = 0x02 },
+				{ .hz = 25, .value = 0x03 },
+				{ .hz = 50, .value = 0x04 },
+				{ .hz = 75, .value = 0x05 },
+				{ .hz = 100, .value = 0x06 },
+				{ .hz = 200, .value = 0x07 },
+			},
+		},
+		.pw = {
+			.addr = 0x10,
+			.mask = 0x70,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.fs_avl = {
+				/*
+				 * Pressure and temperature sensitivity values
+				 * as defined in table 3 of LPS22HH datasheet.
+				 */
+				[0] = {
+					.num = ST_PRESS_FS_AVL_1260MB,
+					.gain = ST_PRESS_KPASCAL_NANO_SCALE,
+					.gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS,
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x10,
+			.mask = BIT(1),
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x12,
+				.mask = BIT(2),
+				.addr_od = 0x11,
+				.mask_od = BIT(5),
+			},
+			.addr_ihl = 0x11,
+			.mask_ihl = BIT(6),
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x03,
+			},
+		},
+		.sim = {
+			.addr = 0x10,
+			.value = BIT(0),
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
 };
 
 static int st_press_write_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 2026a1012012..a60849dd4ea7 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -45,6 +45,10 @@ static const struct of_device_id st_press_of_match[] = {
 		.compatible = "st,lps35hw",
 		.data = LPS35HW_PRESS_DEV_NAME,
 	},
+	{
+		.compatible = "st,lps22hh",
+		.data = LPS22HH_PRESS_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -69,6 +73,7 @@ static const struct i2c_device_id st_press_id_table[] = {
 	{ LPS22HB_PRESS_DEV_NAME, LPS22HB },
 	{ LPS33HW_PRESS_DEV_NAME, LPS33HW },
 	{ LPS35HW_PRESS_DEV_NAME, LPS35HW },
+	{ LPS22HH_PRESS_DEV_NAME, LPS22HH },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_press_id_table);
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 9a3441b128e7..79a12ed46e54 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -49,6 +49,10 @@ static const struct of_device_id st_press_of_match[] = {
 		.compatible = "st,lps35hw",
 		.data = LPS35HW_PRESS_DEV_NAME,
 	},
+	{
+		.compatible = "st,lps22hh",
+		.data = LPS22HH_PRESS_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -93,6 +97,7 @@ static const struct spi_device_id st_press_id_table[] = {
 	{ LPS22HB_PRESS_DEV_NAME },
 	{ LPS33HW_PRESS_DEV_NAME },
 	{ LPS35HW_PRESS_DEV_NAME },
+	{ LPS22HH_PRESS_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_press_id_table);