summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-cs.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-06-28 20:39:46 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-06-28 20:39:46 +0300
commit43bd8a67cd10e9526656e2bc160e52920bd9e43c (patch)
treeefd95e1d1a6cf39de81c5eafc2760fdb019e2247 /drivers/ide/ide-cs.c
parent66d9282523b3228183b14d9f812872dd2620704d (diff)
parent1af11d098db18bfda5168dc407513726e1b1bdb3 (diff)
downloadlinux-43bd8a67cd10e9526656e2bc160e52920bd9e43c.tar.xz
Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe: "The big change in this round is that we're finally in a position where we can sanely remove the old drivers/ide/ code, as libata covers everything we need by now. This is exciting for two reasons: 1) we delete a lot of legacy code that doesn't really meet the standards we have today, and 2) it enables us to clean up various bits in the block layer that exist only because of the old IDE code. Outside of that, just a few minor fixes here, fixups for warnings, etc" * tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits) ata: rb532_cf: remove redundant codes ide: remove the legacy ide driver m68k: use libata instead of the legacy ide driver ARM: disable CONFIG_IDE in pxa_defconfig ARM: disable CONFIG_IDE in footbridge_defconfig alpha: use libata instead of the legacy ide driver pata_cypress: add a module option to disable BM-DMA ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht' ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in ' ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht' ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht' ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht' ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht' ata: sata_mv: Do not over-write initialise fields in 'mv6_sht' ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht' ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT() ata: include: libata: Move fields commonly over-written to separate MACRO ahci: Add support for Dell S140 and later controllers ata: ahci_sunxi: Disable DIPM ...
Diffstat (limited to 'drivers/ide/ide-cs.c')
-rw-r--r--drivers/ide/ide-cs.c364
1 files changed, 0 insertions, 364 deletions
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
deleted file mode 100644
index f1e922e2479a..000000000000
--- a/drivers/ide/ide-cs.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*======================================================================
-
- A driver for PCMCIA IDE/ATA disk cards
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU General Public License version 2 (the "GPL"), in
- which case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-
-#define DRV_NAME "ide-cs"
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/*====================================================================*/
-
-typedef struct ide_info_t {
- struct pcmcia_device *p_dev;
- struct ide_host *host;
- int ndev;
-} ide_info_t;
-
-static void ide_release(struct pcmcia_device *);
-static int ide_config(struct pcmcia_device *);
-
-static void ide_detach(struct pcmcia_device *p_dev);
-
-static int ide_probe(struct pcmcia_device *link)
-{
- ide_info_t *info;
-
- dev_dbg(&link->dev, "ide_attach()\n");
-
- /* Create new ide device */
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->p_dev = link;
- link->priv = info;
-
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
- CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
-
- return ide_config(link);
-} /* ide_attach */
-
-static void ide_detach(struct pcmcia_device *link)
-{
- ide_info_t *info = link->priv;
-
- dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
-
- ide_release(link);
-
- kfree(info);
-} /* ide_detach */
-
-static const struct ide_port_ops idecs_port_ops = {
- .quirkproc = ide_undecoded_slave,
-};
-
-static const struct ide_port_info idecs_port_info = {
- .port_ops = &idecs_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .chipset = ide_pci,
-};
-
-static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
- unsigned long irq, struct pcmcia_device *handle)
-{
- struct ide_host *host;
- ide_hwif_t *hwif;
- int i, rc;
- struct ide_hw hw, *hws[] = { &hw };
-
- if (!request_region(io, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- DRV_NAME, io, io + 7);
- return NULL;
- }
-
- if (!request_region(ctl, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- DRV_NAME, ctl);
- release_region(io, 8);
- return NULL;
- }
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, io, ctl);
- hw.irq = irq;
- hw.dev = &handle->dev;
-
- rc = ide_host_add(&idecs_port_info, hws, 1, &host);
- if (rc)
- goto out_release;
-
- hwif = host->ports[0];
-
- if (hwif->present)
- return host;
-
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- msleep(100);
- ide_port_scan(hwif);
- if (hwif->present)
- return host;
- }
-
- return host;
-
-out_release:
- release_region(ctl, 1);
- release_region(io, 8);
- return NULL;
-}
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
-{
- int *is_kme = priv_data;
-
- if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
- != IO_DATA_PATH_WIDTH_8) {
- pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- }
- pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-
- if (pdev->resource[1]->end) {
- pdev->resource[0]->end = 8;
- pdev->resource[1]->end = (*is_kme) ? 2 : 1;
- } else {
- if (pdev->resource[0]->end < 16)
- return -ENODEV;
- }
-
- return pcmcia_request_io(pdev);
-}
-
-static int ide_config(struct pcmcia_device *link)
-{
- ide_info_t *info = link->priv;
- int ret = 0, is_kme = 0;
- unsigned long io_base, ctl_base;
- struct ide_host *host;
-
- dev_dbg(&link->dev, "ide_config(0x%p)\n", link);
-
- is_kme = ((link->manf_id == MANFID_KME) &&
- ((link->card_id == PRODID_KME_KXLC005_A) ||
- (link->card_id == PRODID_KME_KXLC005_B)));
-
- if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) {
- link->config_flags &= ~CONF_AUTO_CHECK_VCC;
- if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme))
- goto failed; /* No suitable config found */
- }
- io_base = link->resource[0]->start;
- if (link->resource[1]->end)
- ctl_base = link->resource[1]->start;
- else
- ctl_base = link->resource[0]->start + 0x0e;
-
- if (!link->irq)
- goto failed;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- /* disable drive interrupts during IDE probe */
- outb(0x02, ctl_base);
-
- /* special setup for KXLC005 card */
- if (is_kme)
- outb(0x81, ctl_base+1);
-
- host = idecs_register(io_base, ctl_base, link->irq, link);
- if (host == NULL && resource_size(link->resource[0]) == 0x20) {
- outb(0x02, ctl_base + 0x10);
- host = idecs_register(io_base + 0x10, ctl_base + 0x10,
- link->irq, link);
- }
-
- if (host == NULL)
- goto failed;
-
- info->ndev = 1;
- info->host = host;
- dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n",
- 'a' + host->ports[0]->index * 2,
- link->vpp / 10, link->vpp % 10);
-
- return 0;
-
-failed:
- ide_release(link);
- return -ENODEV;
-} /* ide_config */
-
-static void ide_release(struct pcmcia_device *link)
-{
- ide_info_t *info = link->priv;
- struct ide_host *host = info->host;
-
- dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
-
- if (info->ndev) {
- ide_hwif_t *hwif = host->ports[0];
- unsigned long data_addr, ctl_addr;
-
- data_addr = hwif->io_ports.data_addr;
- ctl_addr = hwif->io_ports.ctl_addr;
-
- ide_host_remove(host);
- info->ndev = 0;
-
- release_region(ctl_addr, 1);
- release_region(data_addr, 8);
- }
-
- pcmcia_disable_device(link);
-} /* ide_release */
-
-
-static const struct pcmcia_device_id ide_ids[] = {
- PCMCIA_DEVICE_FUNC_ID(4),
- PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
- PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
- PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
- PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
- PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
- PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
- PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
- PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
- PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
- PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
- PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
- PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
- PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
- PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
- PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
- PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
- PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
- PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
- PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
- PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
- PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
- PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
- PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
- PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
- PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
- PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
- PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
- PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
- PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
- PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
- PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
- PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
- PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
- PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
- PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
- PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
- PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
- PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
- PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
- PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
- PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
- PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
- PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
- PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
- PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, ide_ids);
-
-static struct pcmcia_driver ide_cs_driver = {
- .owner = THIS_MODULE,
- .name = "ide-cs",
- .probe = ide_probe,
- .remove = ide_detach,
- .id_table = ide_ids,
-};
-
-static int __init init_ide_cs(void)
-{
- return pcmcia_register_driver(&ide_cs_driver);
-}
-
-static void __exit exit_ide_cs(void)
-{
- pcmcia_unregister_driver(&ide_cs_driver);
-}
-
-late_initcall(init_ide_cs);
-module_exit(exit_ide_cs);