BackMerge v4.19-rc5 into drm-next

Sean Paul requested an -rc5 backmerge from some sun4i fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 60 insertions, 50 deletions

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index eb4f766b5958..dde8724aa8f5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -411,59 +411,45 @@ static struct nouveau_encoder *
 nouveau_connector_ddc_detect(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
-	struct nouveau_connector *nv_connector = nouveau_connector(connector);
-	struct nouveau_drm *drm = nouveau_drm(dev);
-	struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device);
-	struct nouveau_encoder *nv_encoder = NULL;
+	struct nouveau_encoder *nv_encoder = NULL, *found = NULL;
 	struct drm_encoder *encoder;
-	int i, panel = -ENODEV;
-
-	/* eDP panels need powering on by us (if the VBIOS doesn't default it
-	 * to on) before doing any AUX channel transactions.  LVDS panel power
-	 * is handled by the SOR itself, and not required for LVDS DDC.
-	 */
-	if (nv_connector->type == DCB_CONNECTOR_eDP) {
-		panel = nvkm_gpio_get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff);
-		if (panel == 0) {
-			nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1);
-			msleep(300);
-		}
-	}
+	int i, ret;
+	bool switcheroo_ddc = false;
 
 	drm_connector_for_each_possible_encoder(connector, encoder, i) {
 		nv_encoder = nouveau_encoder(encoder);
 
-		if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
-			int ret = nouveau_dp_detect(nv_encoder);
+		switch (nv_encoder->dcb->type) {
+		case DCB_OUTPUT_DP:
+			ret = nouveau_dp_detect(nv_encoder);
 			if (ret == NOUVEAU_DP_MST)
 				return NULL;
-			if (ret == NOUVEAU_DP_SST)
-				break;
-		} else
-		if ((vga_switcheroo_handler_flags() &
-		     VGA_SWITCHEROO_CAN_SWITCH_DDC) &&
-		    nv_encoder->dcb->type == DCB_OUTPUT_LVDS &&
-		    nv_encoder->i2c) {
-			int ret;
-			vga_switcheroo_lock_ddc(dev->pdev);
-			ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50);
-			vga_switcheroo_unlock_ddc(dev->pdev);
-			if (ret)
+			else if (ret == NOUVEAU_DP_SST)
+				found = nv_encoder;
+
+			break;
+		case DCB_OUTPUT_LVDS:
+			switcheroo_ddc = !!(vga_switcheroo_handler_flags() &
+					    VGA_SWITCHEROO_CAN_SWITCH_DDC);
+		/* fall-through */
+		default:
+			if (!nv_encoder->i2c)
 				break;
-		} else
-		if (nv_encoder->i2c) {
+
+			if (switcheroo_ddc)
+				vga_switcheroo_lock_ddc(dev->pdev);
 			if (nvkm_probe_i2c(nv_encoder->i2c, 0x50))
-				break;
+				found = nv_encoder;
+			if (switcheroo_ddc)
+				vga_switcheroo_unlock_ddc(dev->pdev);
+
+			break;
 		}
+		if (found)
+			break;
 	}
 
-	/* eDP panel not detected, restore panel power GPIO to previous
-	 * state to avoid confusing the SOR for other output types.
-	 */
-	if (!nv_encoder && panel == 0)
-		nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel);
-
-	return nv_encoder;
+	return found;
 }
 
 static struct nouveau_encoder *
@@ -557,12 +543,16 @@ nouveau_connector_detect(struct drm_connector *connector, bool force)
 		nv_connector->edid = NULL;
 	}
 
-	/* Outputs are only polled while runtime active, so acquiring a
-	 * runtime PM ref here is unnecessary (and would deadlock upon
-	 * runtime suspend because it waits for polling to finish).
+	/* Outputs are only polled while runtime active, so resuming the
+	 * device here is unnecessary (and would deadlock upon runtime suspend
+	 * because it waits for polling to finish). We do however, want to
+	 * prevent the autosuspend timer from elapsing during this operation
+	 * if possible.
 	 */
-	if (!drm_kms_helper_is_poll_worker()) {
-		ret = pm_runtime_get_sync(connector->dev->dev);
+	if (drm_kms_helper_is_poll_worker()) {
+		pm_runtime_get_noresume(dev->dev);
+	} else {
+		ret = pm_runtime_get_sync(dev->dev);
 		if (ret < 0 && ret != -EACCES)
 			return conn_status;
 	}
@@ -641,10 +631,8 @@ detect_analog:
 
  out:
 
-	if (!drm_kms_helper_is_poll_worker()) {
-		pm_runtime_mark_last_busy(connector->dev->dev);
-		pm_runtime_put_autosuspend(connector->dev->dev);
-	}
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
 
 	return conn_status;
 }
@@ -1108,6 +1096,26 @@ nouveau_connector_hotplug(struct nvif_notify *notify)
 	const struct nvif_notify_conn_rep_v0 *rep = notify->data;
 	const char *name = connector->name;
 	struct nouveau_encoder *nv_encoder;
+	int ret;
+
+	ret = pm_runtime_get(drm->dev->dev);
+	if (ret == 0) {
+		/* We can't block here if there's a pending PM request
+		 * running, as we'll deadlock nouveau_display_fini() when it
+		 * calls nvif_put() on our nvif_notify struct. So, simply
+		 * defer the hotplug event until the device finishes resuming
+		 */
+		NV_DEBUG(drm, "Deferring HPD on %s until runtime resume\n",
+			 name);
+		schedule_work(&drm->hpd_work);
+
+		pm_runtime_put_noidle(drm->dev->dev);
+		return NVIF_NOTIFY_KEEP;
+	} else if (ret != 1 && ret != -EACCES) {
+		NV_WARN(drm, "HPD on %s dropped due to RPM failure: %d\n",
+			name, ret);
+		return NVIF_NOTIFY_DROP;
+	}
 
 	if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) {
 		NV_DEBUG(drm, "service %s\n", name);
@@ -1128,6 +1136,8 @@ nouveau_connector_hotplug(struct nvif_notify *notify)
 		drm_helper_hpd_irq_event(connector->dev);
 	}
 
+	pm_runtime_mark_last_busy(drm->dev->dev);
+	pm_runtime_put_autosuspend(drm->dev->dev);
 	return NVIF_NOTIFY_KEEP;
 }