Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Dave Airlie:
 "This is the fixes for the last couple of weeks for i915 and last 3
  weeks for amdgpu, lots of them but pretty scattered around and all
  pretty small.

  amdgpu:
   - SR-IOV fixes
   - DCN 3.2 fixes
   - DC mclk handling fixes
   - eDP fixes
   - SubVP fixes
   - HDCP regression fix
   - DSC fixes
   - DC FP fixes
   - DCN 3.x fixes
   - Display flickering fix when switching between vram and gtt
   - Z8 power saving fix
   - Fix hang when skipping modeset
   - GPU reset fixes
   - Doorbell fix when resizing BARs
   - Fix spurious warnings in gmc
   - Locking fix for AMDGPU_SCHED IOCTL
   - SR-IOV fix
   - DCN 3.1.4 fix
   - DCN 3.2 fix
   - Fix job cleanup when CS is aborted

  i915:
   - skl pipe source size check
   - mtl transcoder mask fix
   - DSI power on sequence fix
   - GuC versioning corner case fix"

* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
  drm/amdgpu: drop redundant sched job cleanup when cs is aborted
  drm/amd/display: filter out invalid bits in pipe_fuses
  drm/amd/display: Change default Z8 watermark values
  drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
  drm/amdgpu: add a missing lock for AMDGPU_SCHED
  drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
  drm/amdgpu: Enable doorbell selfring after resize FB BAR
  drm/amdgpu: Use the default reset when loading or reloading the driver
  drm/amdgpu: Fix mode2 reset for sienna cichlid
  drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
  drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
  drm/i915/guc: Actually return an error if GuC version range check fails
  drm/amd/display: Lowering min Z8 residency time
  drm/amd/display: fix flickering caused by S/G mode
  drm/amd/display: Set min_width and min_height capability for DCN30
  drm/amd/display: Isolate remaining FPU code in DCN32
  drm/amd/display: Update bounding box values for DCN321
  drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
  ...

1 files changed, 24 insertions, 1 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index 0e071fbc9154..8263a07f265f 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -983,13 +983,36 @@ void dcn30_set_disp_pattern_generator(const struct dc *dc,
 }
 
 void dcn30_prepare_bandwidth(struct dc *dc,
- 	struct dc_state *context)
+	struct dc_state *context)
 {
+	bool p_state_change_support = context->bw_ctx.bw.dcn.clk.p_state_change_support;
+	/* Any transition into an FPO config should disable MCLK switching first to avoid
+	 * driver and FW P-State synchronization issues.
+	 */
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) {
+		dc->optimized_required = true;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = false;
+	}
+
 	if (dc->clk_mgr->dc_mode_softmax_enabled)
 		if (dc->clk_mgr->clks.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000 &&
 				context->bw_ctx.bw.dcn.clk.dramclk_khz > dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000)
 			dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz);
 
 	dcn20_prepare_bandwidth(dc, context);
+	/*
+	 * enabled -> enabled: do not disable
+	 * enabled -> disabled: disable
+	 * disabled -> enabled: don't care
+	 * disabled -> disabled: don't care
+	 */
+	if (!context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching)
+		dc_dmub_srv_p_state_delegate(dc, false, context);
+
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) {
+		/* After disabling P-State, restore the original value to ensure we get the correct P-State
+		 * on the next optimize. */
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = p_state_change_support;
+	}
 }