Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Not a major amount of change, the i915 trees got split into display
  and gt trees to better facilitate higher level review, and there's a
  major refactoring of i915 GEM locking to use more core kernel concepts
  (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
  get DC support, nouveau got a bump in displayport support with common
  code extraction from i915.

  Outside of drm this contains a couple of patches for hexint
  moduleparams which you've acked, and a virtio common code tree that
  you should also get via it's regular path.

  New driver:
   - Cadence MHDP8546 DisplayPort bridge driver

  core:
   - cross-driver scatterlist cleanups
   - devm_drm conversions
   - remove drm_dev_init
   - devm_drm_dev_alloc conversion

  ttm:
   - lots of refactoring and cleanups

  bridges:
   - chained bridge support in more drivers

  panel:
   - misc new panels

  scheduler:
   - cleanup priority levels

  displayport:
   - refactor i915 code into helpers for nouveau

  i915:
   - split into display and GT trees
   - WW locking refactoring in GEM
   - execbuf2 extension mechanism
   - syncobj timeline support
   - GEN 12 HOBL display powersaving
   - Rocket Lake display additions
   - Disable FBC on Tigerlake
   - Tigerlake Type-C + DP improvements
   - Hotplug interrupt refactoring

  amdgpu:
   - Sienna Cichlid updates
   - Navy Flounder updates
   - DCE6 (SI) support for DC
   - Plane rotation enabled
   - TMZ state info ioctl
   - PCIe DPC recovery support
   - DC interrupt handling refactor
   - OLED panel fixes

  amdkfd:
   - add SMI events for thermal throttling
   - SMI interface events ioctl update
   - process eviction counters

  radeon:
   - move to dma_ for allocations
   - expose sclk via sysfs

  msm:
   - DSI support for sm8150/sm8250
   - per-process GPU pagetable support
   - Displayport support

  mediatek:
   - move HDMI phy driver to PHY
   - convert mtk-dpi to bridge API
   - disable mt2701 tmds

  tegra:
   - bridge support

  exynos:
   - misc cleanups

  vc4:
   - dual display cleanups

  ast:
   - cleanups

  gma500:
   - conversion to GPIOd API

  hisilicon:
   - misc reworks

  ingenic:
   - clock handling and format improvements

  mcde:
   - DSI support

  mgag200:
   - desktop g200 support

  mxsfb:
   - i.MX7 + i.MX8M
   - alpha plane support

  panfrost:
   - devfreq support
   - amlogic SoC support

  ps8640:
   - EDID from eDP retrieval

  tidss:
   - AM65xx YUV workaround

  virtio:
   - virtio-gpu exported resources

  rcar-du:
   - R8A7742, R8A774E1 and R8A77961 support
   - YUV planar format fixes
   - non-visible plane handling
   - VSP device reference count fix
   - Kconfig fix to avoid displaying disabled options in .config"

* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
  drm/ingenic: Fix bad revert
  drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
  drm/amdgpu: Remove warning for virtual_display
  drm/amdgpu: kfd_initialized can be static
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/amdgpu: prevent spurious warning
  drm/amdgpu/swsmu: fix ARC build errors
  drm/amd/display: Fix OPTC_DATA_FORMAT programming
  drm/amd/display: Don't allow pstate if no support in blank
  drm/panfrost: increase readl_relaxed_poll_timeout values
  MAINTAINERS: Update entry for st7703 driver after the rename
  Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
  drm/amd/display: HDMI remote sink need mode validation for Linux
  drm/amd/display: Change to correct unit on audio rate
  drm/amd/display: Avoid set zero in the requested clk
  drm/amdgpu: align frag_end to covered address space
  drm/amdgpu: fix NULL pointer dereference for Renoir
  drm/vmwgfx: fix regression in thp code due to ttm init refactor.
  drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
  drm/amdgpu/swsmu: add interrupt work function
  ...

1 files changed, 131 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c b/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c
index 408046579712..2a2a0fdb9253 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c
@@ -867,6 +867,98 @@ void dce_aud_wall_dto_setup(
 	}
 }
 
+#if defined(CONFIG_DRM_AMD_DC_SI)
+void dce60_aud_wall_dto_setup(
+	struct audio *audio,
+	enum signal_type signal,
+	const struct audio_crtc_info *crtc_info,
+	const struct audio_pll_info *pll_info)
+{
+	struct dce_audio *aud = DCE_AUD(audio);
+
+	struct azalia_clock_info clock_info = { 0 };
+
+	if (dc_is_hdmi_signal(signal)) {
+		uint32_t src_sel;
+
+		/*DTO0 Programming goal:
+		-generate 24MHz, 128*Fs from 24MHz
+		-use DTO0 when an active HDMI port is connected
+		(optionally a DP is connected) */
+
+		/* calculate DTO settings */
+		get_azalia_clock_info_hdmi(
+			crtc_info->requested_pixel_clock_100Hz,
+			crtc_info->calculated_pixel_clock_100Hz,
+			&clock_info);
+
+		DC_LOG_HW_AUDIO("\n%s:Input::requested_pixel_clock_100Hz = %d"\
+				"calculated_pixel_clock_100Hz =%d\n"\
+				"audio_dto_module = %d audio_dto_phase =%d \n\n", __func__,\
+				crtc_info->requested_pixel_clock_100Hz,\
+				crtc_info->calculated_pixel_clock_100Hz,\
+				clock_info.audio_dto_module,\
+				clock_info.audio_dto_phase);
+
+		/* On TN/SI, Program DTO source select and DTO select before
+		programming DTO modulo and DTO phase. These bits must be
+		programmed first, otherwise there will be no HDMI audio at boot
+		up. This is a HW sequence change (different from old ASICs).
+		Caution when changing this programming sequence.
+
+		HDMI enabled, using DTO0
+		program master CRTC for DTO0 */
+		src_sel = pll_info->dto_source - DTO_SOURCE_ID0;
+		REG_UPDATE_2(DCCG_AUDIO_DTO_SOURCE,
+			DCCG_AUDIO_DTO0_SOURCE_SEL, src_sel,
+			DCCG_AUDIO_DTO_SEL, 0);
+
+		/* module */
+		REG_UPDATE(DCCG_AUDIO_DTO0_MODULE,
+			DCCG_AUDIO_DTO0_MODULE, clock_info.audio_dto_module);
+
+		/* phase */
+		REG_UPDATE(DCCG_AUDIO_DTO0_PHASE,
+			DCCG_AUDIO_DTO0_PHASE, clock_info.audio_dto_phase);
+	} else {
+		/*DTO1 Programming goal:
+		-generate 24MHz, 128*Fs from 24MHz (DCE6 does not support 512*Fs)
+		-default is to used DTO1, and switch to DTO0 when an audio
+		master HDMI port is connected
+		-use as default for DP
+
+		calculate DTO settings */
+		get_azalia_clock_info_dp(
+			crtc_info->requested_pixel_clock_100Hz,
+			pll_info,
+			&clock_info);
+
+		/* Program DTO select before programming DTO modulo and DTO
+		phase. default to use DTO1 */
+
+		REG_UPDATE(DCCG_AUDIO_DTO_SOURCE,
+				DCCG_AUDIO_DTO_SEL, 1);
+
+			/* DCCG_AUDIO_DTO2_USE_512FBR_DTO, 1)
+			 * Cannot select 512fs for DP
+			 *
+			 * DCE6 has no DCCG_AUDIO_DTO2_USE_512FBR_DTO mask
+			*/
+
+		/* module */
+		REG_UPDATE(DCCG_AUDIO_DTO1_MODULE,
+				DCCG_AUDIO_DTO1_MODULE, clock_info.audio_dto_module);
+
+		/* phase */
+		REG_UPDATE(DCCG_AUDIO_DTO1_PHASE,
+				DCCG_AUDIO_DTO1_PHASE, clock_info.audio_dto_phase);
+
+		/* DCE6 has no DCCG_AUDIO_DTO2_USE_512FBR_DTO mask in DCCG_AUDIO_DTO_SOURCE reg */
+
+	}
+}
+#endif
+
 static bool dce_aud_endpoint_valid(struct audio *audio)
 {
 	uint32_t value;
@@ -926,6 +1018,19 @@ static const struct audio_funcs funcs = {
 	.az_configure = dce_aud_az_configure,
 	.destroy = dce_aud_destroy,
 };
+
+#if defined(CONFIG_DRM_AMD_DC_SI)
+static const struct audio_funcs dce60_funcs = {
+	.endpoint_valid = dce_aud_endpoint_valid,
+	.hw_init = dce_aud_hw_init,
+	.wall_dto_setup = dce60_aud_wall_dto_setup,
+	.az_enable = dce_aud_az_enable,
+	.az_disable = dce_aud_az_disable,
+	.az_configure = dce_aud_az_configure,
+	.destroy = dce_aud_destroy,
+};
+#endif
+
 void dce_aud_destroy(struct audio **audio)
 {
 	struct dce_audio *aud = DCE_AUD(*audio);
@@ -959,3 +1064,29 @@ struct audio *dce_audio_create(
 	return &audio->base;
 }
 
+#if defined(CONFIG_DRM_AMD_DC_SI)
+struct audio *dce60_audio_create(
+		struct dc_context *ctx,
+		unsigned int inst,
+		const struct dce_audio_registers *reg,
+		const struct dce_audio_shift *shifts,
+		const struct dce_audio_mask *masks
+		)
+{
+	struct dce_audio *audio = kzalloc(sizeof(*audio), GFP_KERNEL);
+
+	if (audio == NULL) {
+		ASSERT_CRITICAL(audio);
+		return NULL;
+	}
+
+	audio->base.ctx = ctx;
+	audio->base.inst = inst;
+	audio->base.funcs = &dce60_funcs;
+
+	audio->regs = reg;
+	audio->shifts = shifts;
+	audio->masks = masks;
+	return &audio->base;
+}
+#endif