cpufreq: armada-37xx: Add AVS support

Armada 37xx supports Adaptive Voltage Scaling and thanks to this patch a
voltage is associated to each load level.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 160 insertions, 3 deletions

diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index 739da90ff3f6..75491fc841a6 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -51,6 +51,16 @@
 #define  ARMADA_37XX_DVFS_LOAD_2	2
 #define  ARMADA_37XX_DVFS_LOAD_3	3
 
+/* AVS register set */
+#define ARMADA_37XX_AVS_CTL0		0x0
+#define	 ARMADA_37XX_AVS_ENABLE		BIT(30)
+#define	 ARMADA_37XX_AVS_HIGH_VDD_LIMIT	16
+#define	 ARMADA_37XX_AVS_LOW_VDD_LIMIT	22
+#define	 ARMADA_37XX_AVS_VDD_MASK	0x3F
+#define ARMADA_37XX_AVS_CTL2		0x8
+#define	 ARMADA_37XX_AVS_LOW_VDD_EN	BIT(6)
+#define ARMADA_37XX_AVS_VSET(x)	    (0x1C + 4 * (x))
+
 /*
  * On Armada 37xx the Power management manages 4 level of CPU load,
  * each level can be associated with a CPU clock source, a CPU
@@ -58,6 +68,17 @@
  */
 #define LOAD_LEVEL_NR	4
 
+#define MIN_VOLT_MV 1000
+
+/*  AVS value for the corresponding voltage (in mV) */
+static int avs_map[] = {
+	747, 758, 770, 782, 793, 805, 817, 828, 840, 852, 863, 875, 887, 898,
+	910, 922, 933, 945, 957, 968, 980, 992, 1003, 1015, 1027, 1038, 1050,
+	1062, 1073, 1085, 1097, 1108, 1120, 1132, 1143, 1155, 1167, 1178, 1190,
+	1202, 1213, 1225, 1237, 1248, 1260, 1272, 1283, 1295, 1307, 1318, 1330,
+	1342
+};
+
 struct armada37xx_cpufreq_state {
 	struct regmap *regmap;
 	u32 nb_l0l1;
@@ -71,6 +92,7 @@ static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state;
 struct armada_37xx_dvfs {
 	u32 cpu_freq_max;
 	u8 divider[LOAD_LEVEL_NR];
+	u32 avs[LOAD_LEVEL_NR];
 };
 
 static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
@@ -148,6 +170,128 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
 	clk_set_parent(clk, parent);
 }
 
+/*
+ * Find out the armada 37x supported AVS value whose voltage value is
+ * the round-up closest to the target voltage value.
+ */
+static u32 armada_37xx_avs_val_match(int target_vm)
+{
+	u32 avs;
+
+	/* Find out the round-up closest supported voltage value */
+	for (avs = 0; avs < ARRAY_SIZE(avs_map); avs++)
+		if (avs_map[avs] >= target_vm)
+			break;
+
+	/*
+	 * If all supported voltages are smaller than target one,
+	 * choose the largest supported voltage
+	 */
+	if (avs == ARRAY_SIZE(avs_map))
+		avs = ARRAY_SIZE(avs_map) - 1;
+
+	return avs;
+}
+
+/*
+ * For Armada 37xx soc, L0(VSET0) VDD AVS value is set to SVC revision
+ * value or a default value when SVC is not supported.
+ * - L0 can be read out from the register of AVS_CTRL_0 and L0 voltage
+ *   can be got from the mapping table of avs_map.
+ * - L1 voltage should be about 100mv smaller than L0 voltage
+ * - L2 & L3 voltage should be about 150mv smaller than L0 voltage.
+ * This function calculates L1 & L2 & L3 AVS values dynamically based
+ * on L0 voltage and fill all AVS values to the AVS value table.
+ */
+static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
+						struct armada_37xx_dvfs *dvfs)
+{
+	unsigned int target_vm;
+	int load_level = 0;
+	u32 l0_vdd_min;
+
+	if (base == NULL)
+		return;
+
+	/* Get L0 VDD min value */
+	regmap_read(base, ARMADA_37XX_AVS_CTL0, &l0_vdd_min);
+	l0_vdd_min = (l0_vdd_min >> ARMADA_37XX_AVS_LOW_VDD_LIMIT) &
+		ARMADA_37XX_AVS_VDD_MASK;
+	if (l0_vdd_min >= ARRAY_SIZE(avs_map))  {
+		pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min);
+		return;
+	}
+	dvfs->avs[0] = l0_vdd_min;
+
+	if (avs_map[l0_vdd_min] <= MIN_VOLT_MV) {
+		/*
+		 * If L0 voltage is smaller than 1000mv, then all VDD sets
+		 * use L0 voltage;
+		 */
+		u32 avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV);
+
+		for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++)
+			dvfs->avs[load_level] = avs_min;
+
+		return;
+	}
+
+	/*
+	 * L1 voltage is equal to L0 voltage - 100mv and it must be
+	 * larger than 1000mv
+	 */
+
+	target_vm = avs_map[l0_vdd_min] - 100;
+	target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
+	dvfs->avs[1] = armada_37xx_avs_val_match(target_vm);
+
+	/*
+	 * L2 & L3 voltage is equal to L0 voltage - 150mv and it must
+	 * be larger than 1000mv
+	 */
+	target_vm = avs_map[l0_vdd_min] - 150;
+	target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
+	dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm);
+}
+
+static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
+						struct armada_37xx_dvfs *dvfs)
+{
+	unsigned int avs_val = 0, freq;
+	int load_level = 0;
+
+	if (base == NULL)
+		return;
+
+	/* Disable AVS before the configuration */
+	regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
+			   ARMADA_37XX_AVS_ENABLE, 0);
+
+
+	/* Enable low voltage mode */
+	regmap_update_bits(base, ARMADA_37XX_AVS_CTL2,
+			   ARMADA_37XX_AVS_LOW_VDD_EN,
+			   ARMADA_37XX_AVS_LOW_VDD_EN);
+
+
+	for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) {
+		freq = dvfs->cpu_freq_max / dvfs->divider[load_level];
+
+		avs_val = dvfs->avs[load_level];
+		regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1),
+		    ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
+		    ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_LOW_VDD_LIMIT,
+		    avs_val << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
+		    avs_val << ARMADA_37XX_AVS_LOW_VDD_LIMIT);
+	}
+
+	/* Enable AVS after the configuration */
+	regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
+			   ARMADA_37XX_AVS_ENABLE,
+			   ARMADA_37XX_AVS_ENABLE);
+
+}
+
 static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
 {
 	unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
@@ -216,7 +360,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
 	struct platform_device *pdev;
 	unsigned long freq;
 	unsigned int cur_frequency;
-	struct regmap *nb_pm_base;
+	struct regmap *nb_pm_base, *avs_base;
 	struct device *cpu_dev;
 	int load_lvl, ret;
 	struct clk *clk;
@@ -227,6 +371,14 @@ static int __init armada37xx_cpufreq_driver_init(void)
 	if (IS_ERR(nb_pm_base))
 		return -ENODEV;
 
+	avs_base =
+		syscon_regmap_lookup_by_compatible("marvell,armada-3700-avs");
+
+	/* if AVS is not present don't use it but still try to setup dvfs */
+	if (IS_ERR(avs_base)) {
+		pr_info("Syscon failed for Adapting Voltage Scaling: skip it\n");
+		avs_base = NULL;
+	}
 	/* Before doing any configuration on the DVFS first, disable it */
 	armada37xx_cpufreq_disable_dvfs(nb_pm_base);
 
@@ -270,16 +422,21 @@ static int __init armada37xx_cpufreq_driver_init(void)
 
 	armada37xx_cpufreq_state->regmap = nb_pm_base;
 
+	armada37xx_cpufreq_avs_configure(avs_base, dvfs);
+	armada37xx_cpufreq_avs_setup(avs_base, dvfs);
+
 	armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
 	clk_put(clk);
 
 	for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
 	     load_lvl++) {
+		unsigned long u_volt = avs_map[dvfs->avs[load_lvl]] * 1000;
 		freq = cur_frequency / dvfs->divider[load_lvl];
-
-		ret = dev_pm_opp_add(cpu_dev, freq, 0);
+		ret = dev_pm_opp_add(cpu_dev, freq, u_volt);
 		if (ret)
 			goto remove_opp;
+
+
 	}
 
 	/* Now that everything is setup, enable the DVFS at hardware level */